## Path:        System/Virtualization
## Description: 
## Type:        string(xenbr)
## Default:     "xenbr"
## Config:      
#
# Name of bridge to create (xenbr0, xenbr1, etc.)
#
BRIDGE_NAME="xenbr"

## Type:        list()
## Default:     "eth0"
## Config:
#
# Space delimited list of physical network  
#  devices to create traditional bridges on
#
# Example:  "eth0 eth1 eth2"
#
# The above example would create 3 traditional bridges 
#  xenbr0 on eth0, xenbr1 on eth1 and xenbr2 on eth2
#
BRIDGE_NETDEV_LIST="eth0"

## Type:        list()
## Default:     ""
## Config:      
#
# Space delimited list of virtual network devices,mac addresses
#  and IP addresses to create local bridges on using the following format:
#
#  <virtual network device>,<mac address>,<IP address/CIDR NetMask>,<nat|hostonly|route>
#
# Example: "veth2,00:16:3E:01:00:02,172.22.0.1/16,nat veth3,00:16:3E:01:00:03,172.23.0.1/16,hostonly"
# 
# The above example would create 2 local bridged the first being a NATed network
#  and the second being a host only network
#
LOCAL_BRIDGE_LIST="veth2,00:16:3E:01:00:02,172.22.0.1/16,nat veth3,00:16:3E:01:00:03,172.23.0.1/16,hostonly"

## Type:        list()
## Default:     ""
## Config:      
#
# Space delimited list of bridge numbers to  
#  create empty bridges on.  
#
#  Example: "4 5"  
#
#  The above example would create two empty bridges named xenbr4 and xenbr5
#
EMPTY_BRIDGE_LIST="4"

## Type:        string(eth0,eth1,eth2,eth3)
## Default:     "eth0"
## Config:      
#
# Network interface to use as the external interface for NATed 
#  and Routed networks
#
NAT_EXTERNAL_INTERFACE="eth0"

## Type:        boolean
## Default:     "false"
## Config:      
#
# If set to true the xend-relocation script will enable/disable 
#  the vm migration feature of xend..
#
ENABLE_RELOCATION="false"

## Type:        list()
## Default:     "any"
## Config:      
#
# Space delimited list of IP addresses/host names of machines
#  that xen will accept vm migrations from.  If set to 'any' 
#  xen will accept vm migrations from any host 
#
# Example: "10.0.0.1 10.0.0.2"  would allow relocation to/from thos IPs
# Example: "any"                would allow reloaction to/from any host
#
RELOCATION_NODELIST="any"

## Type:        boolean
## Default:     "false"
## Config:      
#
# If set to true the xend-relocation script will attempt to
#  enable/disable vm migration on all relocation nodes listed
#  in the RELOCATION_LIST variable.
#
# Note:  Communication with the nodes is done via ssh so
#  pre-distributed ssh keys is recommended.
#
MANAGE_ALL_RELOCATION_NODES="false"

## Type:        integer
## Default:     "8002"
## Config:      
#
# The TCP port used by Xen for VM relocation
#
XEN_RELOCATION_PORT="8002"