3e51b51ba9
be booted from EFI" 53dba447-x86-ACPI-allow-CMOS-RTC-use-even-when-ACPI-says-there-is-none.patch - Upstream patches from Jan 53d7b781-x86-cpu-undo-BIOS-CPUID-max_leaf-limit-earlier.patch 53df71c7-lz4-check-for-underruns.patch 53df727b-x86-HVM-extend-LAPIC-shortcuts-around-P2M-lookups.patch 53e47d6b-x86_emulate-properly-do-IP-updates-and-other-side-effects.patch - Update to Xen Version 4.4.1-rc2 xen-4.4.1-testing-src.tar.bz2 - Dropped 60 upstream patches and xen-4.4.0-testing-src.tar.bz2 - bnc#820873 - The "long" option doesn't work with "xl list" 53d124e7-fix-list_domain_details-check-config-data-length-0.patch - bnc#888996 - Package 'xen-tool' contains 'SuSE' spelling in a filename and/or SPEC file Renamed README.SuSE -> README.SUSE Modified files: xen.spec, boot.local.xenU, init.pciback xend-config.patch, xend-vif-route-ifup.patch - bnc#882673 - Dom0 memory should enforce a minimum memory size (e.g. dom0_mem=min:512M) xen.spec (Mike Latimer) OBS-URL: https://build.opensuse.org/package/show/Virtualization/xen?expand=0&rev=324
90 lines
3.2 KiB
Diff
90 lines
3.2 KiB
Diff
---
|
|
tools/examples/xend-config.sxp | 20 ++++++++++++++++++++
|
|
tools/hotplug/Linux/Makefile | 2 +-
|
|
tools/hotplug/Linux/vif-route-ifup | 34 ++++++++++++++++++++++++++++++++++
|
|
3 files changed, 55 insertions(+), 1 deletion(-)
|
|
|
|
Index: xen-4.4.0-testing/tools/examples/xend-config.sxp
|
|
===================================================================
|
|
--- xen-4.4.0-testing.orig/tools/examples/xend-config.sxp
|
|
+++ xen-4.4.0-testing/tools/examples/xend-config.sxp
|
|
@@ -200,6 +200,26 @@
|
|
#(network-script network-route)
|
|
#(vif-script vif-route)
|
|
|
|
+# SUSE users note:
|
|
+# If using a routed network configuration it is advised to NOT use
|
|
+# network-route and vif-route scripts but instead use sysconfig scripts
|
|
+# in dom0 and vif-route-ifup script to "connect" the domU vif to dom0.
|
|
+# Since this configuration requires a vif sysconfig script in dom0, a static
|
|
+# vif name must be used. E.g. in dom0 the vif sysconfig script
|
|
+# (/etc/sysconfig/network/ifcfg-xen1.0) may contain
|
|
+#
|
|
+# NAME='XEN vm 1 virtual interface 0'
|
|
+# BOOTPROTO='static'
|
|
+# STARTMODE='hotplug'
|
|
+# ...
|
|
+#
|
|
+# The corresponding domain vif configuration would contain e.g.
|
|
+# vif=[ 'mac=00:16:3e:aa:bb:cc,script=vif-route-ifup,vifname=xen1.0', ]
|
|
+#
|
|
+# If the vif-route-ifup script will be used for all domains, it can be
|
|
+# set here as the default vif script, alleviating the need for
|
|
+# 'script=' in domain vif configuration.
|
|
+#(vif-script vif-route-ifup)
|
|
|
|
## Use the following if network traffic is routed with NAT, as an alternative
|
|
# to the settings for bridged networking given above.
|
|
Index: xen-4.4.0-testing/tools/hotplug/Linux/Makefile
|
|
===================================================================
|
|
--- xen-4.4.0-testing.orig/tools/hotplug/Linux/Makefile
|
|
+++ xen-4.4.0-testing/tools/hotplug/Linux/Makefile
|
|
@@ -11,7 +11,7 @@ XENCOMMONS_SYSCONFIG = init.d/sysconfig.
|
|
|
|
# Xen script dir and scripts to go there.
|
|
XEN_SCRIPTS = network-bridge vif-bridge
|
|
-XEN_SCRIPTS += network-route vif-route
|
|
+XEN_SCRIPTS += network-route vif-route vif-route-ifup
|
|
XEN_SCRIPTS += network-nat vif-nat
|
|
XEN_SCRIPTS += vif-openvswitch
|
|
XEN_SCRIPTS += vif2
|
|
Index: xen-4.4.0-testing/tools/hotplug/Linux/vif-route-ifup
|
|
===================================================================
|
|
--- /dev/null
|
|
+++ xen-4.4.0-testing/tools/hotplug/Linux/vif-route-ifup
|
|
@@ -0,0 +1,34 @@
|
|
+#!/bin/bash
|
|
+#============================================================================
|
|
+# /etc/xen/vif-route-ifup
|
|
+#
|
|
+# Script for configuring a vif in routed mode.
|
|
+# The hotplugging system will call this script if it is specified either in
|
|
+# the device configuration given to Xend, or the default Xend configuration
|
|
+# in /etc/xen/xend-config.sxp. If the script is specified in neither of those
|
|
+# places, then vif-bridge is the default.
|
|
+#
|
|
+# Usage:
|
|
+# vif-route-ifup (add|remove|online|offline)
|
|
+#
|
|
+# Environment vars:
|
|
+# dev vif interface name (required).
|
|
+#============================================================================
|
|
+
|
|
+dir=$(dirname "$0")
|
|
+. "$dir/vif-common.sh"
|
|
+
|
|
+case "$command" in
|
|
+ online)
|
|
+ ifup ${dev}
|
|
+ ;;
|
|
+ offline)
|
|
+ do_without_error ifdown ${dev}
|
|
+ ;;
|
|
+esac
|
|
+
|
|
+log debug "Successful vif-route-ifup $command for ${dev}."
|
|
+if [ "$command" = "online" ]
|
|
+then
|
|
+ success
|
|
+fi
|