- update to 389:
* interchange variables in subparameter parsing, fixing a bug
where subparameters after the first parameter could be
misidentified
* correct popping of icon/window titles in a case where only
one was pushed from patch #385 changes.
* add XTQMODKEYS response in DECRQSS, as alternative for vim.
* correct DECCIR encoded information on character set size,
handle a VT525 quirk, and add DECST8C (Windows Terminal
#14984).
* improve DECRQCRA (prompted by discussion with James
Holderness, Windows Terminal #14974).
* add part of VT525 color controls:
+ DECAC, to update default foreground/background, respond to
DECRQSS
+ DECATC, to respond with DECRQSS
* prevent Unicode non-characters from being printed
* modify send_SGR() to avoid modifying colors 16 to 255 in
printed output (patch by Grady Martin).
* minor cleanup of miscellaneous error-codes with ERROR_MISC.
* remove legacy CSI 53 for locator status, corrected in patch
* modify DECRQUPSS and DECAUPSS feature to support VT5xx
character sets (report by Thomas Wolff).
* improve EWMH handling (report/analysis by Edward Rosten)
+ reset _NET_WM_STATE_HIDDEN flag from _NET_WM_STATE before
mapping the window to deiconify.
+ cache X properties to reduce latency (adapted
from patch by Edward Rosten).
OBS-URL: https://build.opensuse.org/request/show/1141989
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=233
- update to 388:
* improve disallowPasteControls by adding a category for the
special characters known to stty (prompted by discussion
with David Leadbeater).
* amend support of DECAUPSS, undoing change to initialization of
G2/G3 so that pasting of GR characters work properly
* update config.guess, config.sub
valid font so that a subsequent OSC 50 reports this correctly
VT330/VT340 DECSDM setting
* fix a misnamed macro-parameter
* modify makefile to use plink.sh when linking test-programs, to fix build when using pcre
* build-fix for test_ptydata program
* correct order of button-range versus protocol type
* increase response-buffer size
* amend change to default-translations "select" to ensure that specific key-press actions are listed first
* define also wideBoldFont to get rid of a warning (bsc#1067530)
* rename new(er) configure option --enable-initial-erase to
--enable-pty-erase, since that conflicted with an existing
* fix cut/paste error in --with-builtin-xpms configure option
* fix minor formatting issue in xterm manual (report by Jens
* eliminate unnecessary "#(vi" markers in autoconf macros by
using "(" to begin case-statement cases (suggested by Jens
- Add pkgconfig and groff as dependency as configure is looking
GNOME shell.
- fix SUSE naming in the package files (bnc#888995)
properties that refer to windows which no longer exist
OBS-URL: https://build.opensuse.org/request/show/1125232
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=231
- update to 385:
* fixes for ReGIS (report by Ben Wong).
+ correct conversion from HLS to RGB
+ improve font-caching performance.
* update tables in wcwidth.c based on Unicode 15.1.0
* improve fastScroll resource:
+ suppress screen-refreshes for carriage-returns
+ add -jf option to simplify use of this resource.
+ add a control sequence for enabling/disabling the resource.
+ enable this feature by default
* extend title-stack feature to allow an additional parameter to
directly access the stack, like the XTPUSHCOLORS and XTPOPCOLORS
feature.
* correct size and position of box shown for double-cell character
which happens to be missing from the bitmap font (report by Peter
Fabinski).
* improved configure script:
+ add pattern for uClibc-ng to CF_XOPEN_SOURCE (report/patch by
Waldemar Brodkorb).
+ add configure options --with-utmp-path and --with-wtmp-path to
override configure script's check for utmp/wtmp pathnames
which are shown in the manual (Debian #1042767).
+ CF_XOPEN_SOURCE provides for defining _DEFAULT_SOURCE for
MinGW32 and MinGW64.
+ sed expression used to report gcc version now works with MinGW
* ensure that line-attributes are reset after drawing missing
character (report by Christian Weisgerber).
* update config.guess, config.sub
- rebased all patches
OBS-URL: https://build.opensuse.org/request/show/1114902
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=226
- update to 384:
* exclude ASCII space from showMissingGlyphs, since a few
bitmap fonts lack this
* correct a step in rendering double-width characters
with bitmap-fonts
* fixes for ReGIS-related problems:
* mimic an undocumented hardware VT340 feature
which handles color initialization with incomplete parameters.
* handle whitespace between operator/operands for
color values.
* reset ReGIS-context when resetting graphics in RIS.
OBS-URL: https://build.opensuse.org/request/show/1098806
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=222
- update to 382:
* amend change to CursorBack> in patch 380, allowing the result
to be on the hidden right-half of double-cell characters
* amend xtermDrawString, fixing regression with
--disable-wide-chars configuration from patch #380
* corrected pathname for run-tic.sh, for full
install in an out-of-tree build
* fix a regression in wide bitmap fonts versus check for
missing glyphs
OBS-URL: https://build.opensuse.org/request/show/1092344
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=220
- update to 380:
* reduce compiler warnings in configure script.
* simplify the change for sixelScrolling
* add xterm+focus and report+da2, update report+version building
blocks in terminfo, from post-ncurses 6.4
* drop the -title option from uxterm and koi8rxterm, because that
interferes with deriving the default title from the -e option
(Debian #1031837). Compensate for this by using the -class option
to derive a default title.
* improve description of readline 2003 mode in ctlseqs.ms
* other improvements to status-line feature (report by Thomas Wolff):
+ clear status line on DECCOLM
+ ignore DECSASD if no previous DECSSDT
+ allow DECSSDT 1 immediately after DECSSDT 2, i.e., without
switching back to host mode.
* adjust RequestResize to avoid shrinking screen when using DECCOLM
while the status-line is active (report/patch by Thomas Wolff).
* disallow wrapping before the beginning of the screen, to the end of
the screen, for cursor-back sequences (Redhat #2182357).
* modify makefile to install the 16x16 xpm files (report by Harald
Dunkel).
* update test-package to reflect resolution of Debian #906901.
* change default of showMissingGlyphs to True.
* improve handling of double-sized characters when those happen to be
missing from the bitmap font and/or are fullwidth.
* pointer/overflow fixes (reported by David Leadbeater):
+ improve limit-checks for control-sequence numeric parameters
in SIXEL graphics.
+ add null-pointer checks in WriteNow macro to handle a case
where SS2 or SS3 might be in effect while processing a
OBS-URL: https://build.opensuse.org/request/show/1087806
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=218
- update to 379:
* improve text-cursor (patch by Jan Engelhardt):
+ allow selecting CURSOR_BAR mode from command-
line/Xresources.
+ draw cursor using filled rectangle instead
of rectangle outline to permit thicker underlines/bars.
+ scale up cursor relative to font size.
* improve readline modes (Fedora #2166860):
+ document readline modes
+ change the feature to configure by default
+ replace hard-coded SS3 for cursor movement with
current mode
+ replace hard-coded erase/lnext characters with
current values
* improve status-line (report by Thomas Wolff):
+ RIS turns off status-line
+ Right-margin (DECLRMM and DECSLRM) limits the
length of text written/updated in the status-line.
+ Most controls which affect the whole screen are
ignored while updating the status-line.
* modify configure check for tgetent to allow for some special
cases of ncurses configuration
* reduce timeout, improve warning message if resize is
run on a terminal which is not VT100-compatible.
* reduce compiler warnings in configure script.
- drop xterm-enable_libtinfo.patch (obsolete)
OBS-URL: https://build.opensuse.org/request/show/1069848
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=216
- update to 378:
* improve descriptions of XTQMODKEYS and XTQALLOWED features in
ctlseqs.ms (reports by Bram Moolenaar, Thomas Wolff).
* add bracketed+paste and report+version building blocks to terminfo,
from ncurses 6.4
* improve check for unsupported formatting characters, e.g.,
zero-width space, to properly ignore them (report by Thomas Wolff).
* improve/document error-checking for some of the controls which
return responses: DECRQSS, XTGETXRES, XTSETTCAP, XTGETTCAP
(prompted by discussion with David Leadbeater).
* improve limit-checks for fallback font cache (report by Dimitrije
Erdeljan).
* improve check for too-wide glyph in fallback font by allowing xterm
to continue searching for a suitable font rather than just failing
on the first. Also add limitFontWidth to allow changing the amount
by which a glyph must extend outside the font's bounding box to
disallow it.
OBS-URL: https://build.opensuse.org/request/show/1058980
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=214
- update to 377:
* add control sequences for reporting the current state of the
modified keys options (XTQMODKEYS) and allowed/disallowed
operations (XTQALLOWED), (prompted by discussion with Bram
Moolenaar).
* amend modifyOtherKeys case 2 to distinguish the escape character
with modifiers, e.g., shift-escape, from a plain escape character
(suggested by Bram Moolenaar).
* improve parsing and error-recovery in the case where a list of X11
bitmap fonts is given in the -fn and related options.
* change default for xftTrackMemUsage to false, because libXft has
does not handle certain fonts.
OBS-URL: https://build.opensuse.org/request/show/1039839
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=212
- update to 376:
* modify configure script to always check for gcc attributes,
* update install-sh.
* fix parsing of result -u in vttests/halves.pl.
* add a note in ctlseqs.ms about compatibility of TBC.
* fix a copy/paste error in manual (patch by Grady Martin).
* add null-pointer checks in x_strcasecmp and x_strncasecmp, to help
with error-recovery for a missing font (Debian #1022942).
OBS-URL: https://build.opensuse.org/request/show/1036713
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=210
- update to 373:
* improve rendering of TrueType fonts:
+ add resource xftTrackMemUsage to enable/disable a new feature
of Xft which improves performance.
+ add resources xftMaxGlyphMemory and xftMaxUnrefFonts to
customize memory-usage of Xft and fontconfig.
+ provide for display of colored fonts in libXft 2.3.5
+ allow for an extra TrueType font to be specified using the -fa
option, as an override to the fontconfig scheme of fallback
fonts (request by Nickolas Raymond Kaczynski).
+ improve caching of TrueType missing-glyph tests.
+ allow no more than 255 fonts to be scanned for a fontset.
+ eliminate a table-lookup in findXftGlyph
* improvements status-line feature:
+ save/restore wraparound flag when updating the status-line
(report by Rajeev V. Pillai).
+ avoid clearing the status-line when switching between normal
and alternate screens (report by Valtteri Vuorikoski).
+ remove adjustment from update_winsize leftover from initial
work (report by Valtteri Vuorikoski).
* modify wcwidth tables to separate Unicode Cf category as formatting
control-characters, to better match the guideline for unsupported
characters (report by Tim Chase).
* add configure option --disable-exec-selection.
* use mkstemp where mkdtemp is unavailable, when initializing colored
cursor.
* adapt fixes from OpenBSD xenocara:
+ improve ifdef's for a few optional features.
+ correct #ifdef to #if in a few uses of OPT_PRINT_ON_EXIT.
* set StartupWMClass in “.desktop” files, e.g., to help
OBS-URL: https://build.opensuse.org/request/show/1006528
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=204
* amend allocation/freeing of scrollback lines, eliminating an
adjustment for status-line added in patch #371 (report/testcase by
Rajeev V. Pillai).
- update to 371:
* drop double-buffer default from test-packages, since that
interferes with status-line.
* add faceSize7 to table in charproc.c, overlooked in patch #360
(patch by Vladimir A. Pavlov).
* use XDrawString rather than XDrawString16 for text when the latter
is not needed.
* improve performance for initializing/reusing graphic objects in the
SIXEL feature.
* improve error-checking for resize.
* fix errata in manual page (Debian #988221).
* extended list of environment variables to purge on startup, i.e.,
in case a user starts xterm from another terminal emulator.
* add comment in cursor.c to explain why autowrap (DECAWM) does not
apply to data saved/restored with save/restore cursor-operations
(report by Thomas Wolff).
* add special case in generating the combining-character table in
wcwidth.c, for Hangul Jamo Extended-B (report by Luis Javier
Merino).
* simplify/improve portability of trap commands in shell-scripts.
* update configure options
--disable-rectangles,
--disable-tcap-fkeys and
--disable-tcap-query
to account for changed default settings.
* rather than ignore empty parameter for setting title, use that to
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=202
- update to 370:
* add -a, -c and -d options to query-status.pl to improve test for
DECRQSS.
* expanded discussion of maximum graphics geometry in ctlseqs.ms
* corrected parameter symbol for DECCARA and DECRARA in ctlseqs.ms to
indicate that multiple parameters may be used
* add several test/demo scripts.
* improve DECCOLM, DECLRMM and DECALN referring to pseudo-code in DEC
070.
* amend a change in patch #348 which caused left/right margin mode to
be reset when resizing the terminal window
* fix a misnamed macro-parameter
* fix spacing of wideFont when its width is not exactly twice as wide
as the normal font
* suppress loading of italic font in a few places when colorITmode is
enabled
* modify XTSMGRAPHICS to return failure status if the terminal is not
configured to support the corresponding ReGIS or SIXEL feature
* modify DECERA and DECFRA to erase corresponding area in SIXEL
graphics
* equate visuals for TrueColor and DirectColor
* correct computation for pixel value of rgb when using depth 16
* correct wrapping of VT100-style double-sized characters when
configured for Unicode wide-characters
* updated default value for sixelScrolling resource to match expected
behavior versus DECSDM change in patch #369
- update to 369:
* modify run-tic.sh to work around bug in development version of
ncurses which was packaged in FreeBSD ports.
OBS-URL: https://build.opensuse.org/request/show/934172
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=201
* add DefaultOff option to RenderFont resource, as part of the session-management feature.
* add auto-scroll-lock feature (patch by add Stelios Bounanos).
* update the window-size information returned via TIOCGWINSZ when rows/columns are unchanged but the font-size changes (report by Nick Black).
* improve session-management feature by saving/restoring the font settings.
* update config.guess, config.sub
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=197
- update to Patch #367 - 2021/03/26
* add OSC 22 to allow programs to select different pointer cursor at
runtime.
* change configuration for no-return functions to use _Noreturn when
it is available, because clang --analyze does not properly handle
the gcc noreturn attribute.
* add cursorTheme resource to provide a way to enable or disable the
cursor theme feature.
* modified CopyWait event retries to use shorter sleeps, to improve
responsiveness (tmux #2556).
* improve quoting/escaping in demo-scripts per shellcheck.
* add resizeByPixel resource, to permit disabling window manager
resizing-hints (patch by Tim Oehl).
* corrected printOptsImmediate handling of alternate-screen (report
by Abhijit Dasgupta).
* update sample terminfo to more closely match ncurses.
* add/improve limit-checks for Xlib calls (report by Roman Fiedler).
* fix a typo in the help-message (report by Tomas Korbar).
OBS-URL: https://build.opensuse.org/request/show/883706
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=195
* correct a compiler-warning fix in patch #352 which allowed
sign-extension of coordinate values (report by "CismonX").
* correct upper-limit for selection buffer, accounting for combining
characters (report/testcase by Tavis Ormandy).
(CVE-2021-27135 bsc#1182091)
* with alwaysHighlight true, xterm does not properly track focus. The
screen->select FOCUS flag remains always on, which prevents
bellIsUrgent from working, as the urgent WM_HINT flag is only set
in setXUrgency() when the window is not focused. Fix this by
updating screen->select in unselectwindow() regardless of the value
of always_highlight (patch by Jiri Bohac).
* improve fix for interaction between SRM and ENQ (report by Grant
Taylor).
* build-fix for --with-Xaw3dxft, needed when --with-toolbar is
omitted (report by Jimmy Olgeni, Emanuel Haupt).
- Updated to Patch #365 - 2021/02/03
* amend fix for “word” selection in patch #364 to limit that to
the insert-selectable action, which reads data from the screen. This
restores the interactive behavior where double-clicking on a
“word” would make subsequent selection extensions by words as
well as suppressing some boundary-checks (report by David Wolfskill,
FreeBSD #253225).
- Updated to Patch #364 - 2021/02/02
* add -fc option.
* correct/improve limit-checks for SRM versus ENQ from patch #344 (report by Tom Szilagyi).
* enable XftFont resource in Xaw3dxft configuration (patch by Tavis Ormandy).
* improve quoting/escaping in build-scripts per shellcheck.
* add libpcre2-posix to the packages tested for --with-pcre2 option, needed with Fedora (report by Tomas Korbar).
* correct a typo in manual page, and note that KeepClipboard may not be compiled-in (report/patch by Sean C Farley).
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=193
- update urls to use https (its 2020 after all)
- Update to Patch#359 - 2020/08/17
* add special case in WriteText to allow colors 8-15 to override colorBDMode
* add utf8Weblike resource, to provide an alternate scheme for handling ill-formed UTF-8 sequences
* improve computation for the number of lines needed to scroll-up a SIXEL graphic
* correct manpage description for default value of disallowWindowOps from changes in xterm #331
* correct a loop starting-point in refresh_graphics from optimization in patch #358 changes
* add a new mouse mode 1016, which uses the same format as mode 1006, but sends the mouse's position in pixels
* fix an issue from patch #338 changes where only the first selection buffer specified in the request would be updated using OSC 52
* modify makefile/scripts to allow DESTDIR to prefix the target directory for desktop-file-install
* enable SIXEL feature by default.
* update config.guess, config.sub
* correct logic for decodeTerminalID changes in patch #357
* modify makefile to use plink.sh when linking test-programs, to fix build when using pcre
* build-fix for test_ptydata program
* several minor optimizations for the ReGIS and SIXEL features, improving performance by 10%.
* add resource decGraphicsID to allow displaying graphics when the emulation level would ordinarily disallow this
* add control sequences for fast switching of color palettes: XTPUSHCOLORS, XTPOPCOLORS, XTREPORTCOLORS
* amend change for soft-hyphen from patch #328 to avoid stripping replacement-characters which would be shown with malformed or overlong UTF-8 input.
* corrected an error-handling case in decodeUtf8, matching a similar fix in patch #268
* add a test-driver for ptydata.c
* minor cleanup of macros
* fix some errata in ctlseqs.ms
* allow immediate repaint-on-palette-changed if double-buffering is enabled.
* deprecate codes 10/11 in sgr push controls, changing those to 30/31, to avoid confusion with sgr 10-19.
* modify SGR parameter handling to stop if an unrecognized parameter is encountered, to guard against malformed or nonstandard sequences
* modify DECERA color for consistency with other erasures/clearing
* ECH should not be masked by DECSCA
* extend DECFRA and REP to accept any “graphic” character rather than just Latin1, etc.
* add -C option to 256colors2.pl and 88colors2.pl, to demonstrate mixed semicolon/colon separators which are implied by ECMA-48.
OBS-URL: https://build.opensuse.org/request/show/834743
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=189
- amend change in patch #352 for button-events to fix a case where some followup events were not processed soon enough (report/patch by Jimmy Aguilar Mena).
- handle MappingNotify X event, to improve recovery when switching keyboard configurations using xkbcomp (prompted by discussion with Frank Mosch, Debian #661295). There is more work needed here, possibly in the X libraries.
- improve discussion of mouse-mode in ctlseqs.ms (suggested by Igor van den Hoven).
- further improve checks for Xft max-advance-width to take into account fonts which use two cells for ambiguous width characters. Also improve the time used for these checks (reports by Yuri Pankov, Frank Mosch).
- fix a few spelling errors reported by codespell (report by Jens Schleusener).
- modify run-tic.sh to prefer development version of ncurses since changes to terminfo file in patch #345 rely upon bug-fixes in ncurses (prompted by discussion with Will Senn).
- Patch #352 - 2020/01/16
- adjust fontsize data to handle a minor inconsistency from recent Xft versions (Debian #880407, adapted from patch by Vincent Lefevre).
- add a table to the manual page description of forceBoxChars to alert the reader to the special characters aside from “line-drawing” which are drawn directly when this resource is set (Debian #931305).
- improve checkXft logic which attempts to detect fonts whose max-advance-width is inconsistent with the actual glyph widths. For some fonts, it is necessary to check additional characters (report/analysis by Jan Engelhardt).
- improve configure-checks for X headers and libraries on recent MacOS, which has moved those files under /usr/X11.
- improve portability of iconify/deiconify feature by taking into account some window managers which manipulate the EWMH _NET_WM_STATE property, adding/removing _NET_WM_STATE_HIDDEN rather than actually minimizing the window (prompted by discussion with Jörg Breitbart).
- improve workaround from patch #287 for the -iconic option when configured with toolbar by postponing the extra request for minimizing the window to the end of menu-initialization.
- modify xevents special-case for mouse-events to include button-events so that the meta key by itself can generate button-events (report/analysis by Mattias Engdegård).
- amend SGR-stack change from patch #348 to not associate bold attribute with background color (report by Nicholas Marriott).
- fix copy/paste error in manual page (patch by Larry Hynes).
- add definitions in xterm_io.h so that GNU/Hurd will use posix_openpty (patch by Samuel Thibault).
- build-fix in debug-tracing, for esctest.
- updated autoconf macros
- update config.guess
- Patch #351 - 2019/11/17
- correct logic in property_to_string for deciding when to fallback from UTF-8 decoding to ISO-8859-1 decoding, broken in xterm #350 (FreeBSD #241961).
- add -report-icons to help-message.
- improved autoconf macros:
- CF_ADD_LIBS: the change to filter out duplicates caused this to append rather than prepend. revise to fix that.
- CF_GCC_VERSION and CF_GCC_WARNINGS: move checks to distinguish icc/clang from gcc from the macro which handles the --enable-warnings option, to make this work without-warnings for the inline-checks.
- update config.guess, config.sub
- correct status in XTGETXRES replies when the resource was not found.
- fix some gcc, cppcheck, clang and coverity warnings.
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=182
- Patch #342
* limit mouse-button events to 11 buttons in the protocol
* correct calculaton for buttons past 11 (15 in extended proto)
* disable a supplementary check added in #341 that interferes with
fontconfig to select different sized bitmap fonts
- Patch #341
* Add options to mouse-codes script to demonstrate encoding works
* Allow mouse button numbers up to 11 using an offset of 128 for 8-11
* correct off-by-one right margin checks for double-width char adjustments
* modify the initial pattern passed to fontconfig to disallow color bmps
* improve error recovery for a case where fontconfig ignores the requested pattern
OBS-URL: https://build.opensuse.org/request/show/662929
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=163
- Patch #335 - 2018/08/14
* add colorInnerBorder resource to make a change from patch
#334 configurable (reports by H Merijn Brand, Gabriele
Balducci).
- Patch #334 - 2018/08/12
* modify Imakefile to reflect the fact that NetBSD no longer
has a working termcap emulation.
* add resource-setting validShells which can be used to augment
the system's /etc/shell (prompted by discussion with Paul
Lampert).
* stifle some useless warnings from lintian in test-packages.
* add the ncurses extension “RGB” to the responses for the
termcap-query feature.
* improved getopts-handling in sample scripts.
* fix some warnings from gcc8 and clang --analyze.
* update note about incorrect documentation for DECRQSS to
include VT525 (report by Markus Schmidt).
* correct check for default-values in rectangular parsing; a
zero counts as a missing or default parameter
(report/testcase by Markus Schmidt).
* correct some ranges in the ambiguous[] table in wcwidth
(adapted from patch by KUGA Tsutomu).
* fix a special case with faint video attribute incorrectly
combined with default color.
* add private control XTREPORTSGR for reporting
video-attributes and color on a rectangle, and script
report-sgr.pl to demonstrate it.
* modify some of the markup in ctlseqs.ms to work around
groff's reassignment of ASCII punctuation characters as
documented in groff_char(7).
OBS-URL: https://build.opensuse.org/request/show/631631
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=158
- Patch #332
- spec-cleaned
- drop support for unsupported distros
* add a GetChecksum item to disallowedWindowOps
* improve notes in ctlseqs.ms which mention where various controls originated.
* add control sequences for querying the X display size and the character size,
both in pixels to help eliminate some of the constants in esctest.
* fixes prompted by review of George Nachman's esctest script:
* add a null-pointer check and a limit-check in xtermCheckRect.
* correct limit-check for right-margin when processing autowrapping if xterm
is not built for wide-characters.
* repair logic in RIS to reset 132-column mode when an escape sequence is
used to enable 80/132-column switching.
* correct array-limit for EWMH working state.
* further improve limit-checks versus assert's.
* correct order of check-margins and move-to-left margin for DL and IL.
* modify reverse-wrap to pay attention to top/bottom margins as it has done
for left/right margins since patch #279.
* modify behavior of DECFI and DECBI to not index the screen at the left/right
edge of the display unless those happen to be the left/right margins.
* add case for VT320 DSR response for keyboard status.
* improve check for valid shell path using getusershell and endusershell
if available, in case /etc/shells does not exist/
* modified configure checks for groff and man2html, to use the latter by default,
but allowing mandoc as a partial replacement for former.
OBS-URL: https://build.opensuse.org/request/show/600315
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=153
- Patch #331 - 2017/12/30
* add workaround for improper grayscale adjustments made in
FreeType library, exposed by changes to rounding in 2.8.1,
which shows up as a gap in line-drawing characters
* improve a special case where a non-Unicode font's line-drawing
characters were not used, when specifying it via the utf8Fonts
resource.
* replace constant 10msec delay for next X event with new resource
nextEventDelay, and reduce that to 1msec to accommodate faster
machines than used when -hold was implemented in 1999
* add scroll-to action, which simplifies binding a key to scroll
to the beginning or end of the saved-lines
* add building blocks for alternate screen and/or title-stack
features in the terminfo file.
* improve calculations for cell-data size.
* configure script: enable XHTML/SVG screen dumps by default.
* configure script: enable 256-colors by default.
* update config.guess, config.sub
* configure script: option for --with-man2html to use improved
script by default.
* add case for private mode 1044 in DECRQM, to report the
keepClipboard resource setting and corresponding menu entry.
* fix an inconsistency between private mode 12 (the AT&T 610
cursor blink) and DECSCUSR: the former relied on having the
cursorBlink resource set initially to enable the escape sequence,
while the latter does not.
* add private modes 13 and 14, as well as resource cursorBlinkXOR
to allow better control over the cursor-blinking state
* modify the html and svg screen dumps to support direct color
* modify media copy (screen-printing) to support the same SGR
codes as DECRQSS, including 88/256 indexed color as well as
direct color.
* improve options-parsing for query-status.pl script.
* modify parsing of SGR direct-color control making color space
identitier optional. The corresponding DECRQSS reply always
returns an empty (default) field for the identifier.
* add wide-attributes to DECRQSS reply for SGR.
* add private mode 1046 to help with scripting applications.
* correct expression used for readline-flags in DECRQM; to test
the current flag rather than information stacked within the
same variable.
* correct typo in ctlseqs.ms reference to ISO-8613-6
* fix lintian warning for test-package.
* fix typo in DECRQSS for SGR 48, which printed the foreground
value for colors past 15. Also use colon delimiter for codes
38/48 in response
* improve workaround for Debian #542434 by using the font's
maximum width when no ISO-8859-1 glyphs are provided
* work around a special case of Xft's mismanagement of its
cached data by adding a check before the -report-fonts option
to ensure that it does not use an XftPattern which may have been
freed during a call to XftFontOpenPattern.
* improve manual page description of regex option for onXClicks
resources
* add directColor resource.
* additional manpage macro cleanup
* add optional support for direct-colors
* improve legacy/NRC character set mapping:
+ enable alternate NRC set designators for French and French
Canadian, ‘9’ and ‘f’ respectively, as documented in ctlseqs.
(‘9’ is documented for VT510, ‘f’ is a Kermit feature).
+ correct the Unicode value in the DEC Technical table to show
capital delta.
+ referring to
* http://vt100.net/docs/vt220-rm/table2-3b.html
* http://vt100.net/docs/vt320-uu/appendixe.html
+ add entries for the DEC Supplemental Graphics table to display
0x28/0xa8 as ¤ and 0x5d/0xdd as Ÿ.
referring to
* http://www.vt100.net/charsets/technical.html
* alter the Unicode values used for 0x2b through 0x2c to use
curly braces to work with the “middle” parts displayed with
0x2f and 0x30.
+ modify the VT220 “Supplemental” table, giving a hint that it
was probably meant to be “Supplemental Graphics” and is the
same as VT320's table.
* quiet a few font-warnings when a derived fontname cannot be
opened, overlooked in refactoring of font resources in patch #328
* correct error response for DECRQSS broken in cleanup of
Coverity reports in patch #288
* improve DECRPM responses by returning mode not recognized for
modes which may not be settable due to the selected
decTerminalID resource
* correct logic for print-immediate action, and enable
corresponding menu entry
* add configure option --with-pcre2
* fix a misspelled subsection title in ctlseqs.ms and add a note
regarding blink which was rendered as bold in X11R6. Blinking
text was implemented in Patch #60.
* fix typos in xterm.man
* fix typography in xterm.man
* fix typo in INSTALL
* add xterm-direct terminal description based on changes
introduced in patch #277, and relying upon ncurses RGB extension.
* modify xterm-new terminal description to use ECMA-48 REP,
reflecting its use in xterm since patch #32 (1996).
* clarify comment in ctlseqs.ms regarding blink: it has been
part of xterm since patch #60 (1998).
* update ftp URLs in documentation.
OBS-URL: https://build.opensuse.org/request/show/572173
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=151
- Patch #330 - 2017/06/20
* updates for ReGIS (Ross Combs):
+ remove redundant text command error check which broke
T(B) and T(E).
+ retain the loading alphabet number across multiple “L”
commands.
+ add S(T) delay handler.
+ fix some color handling error messages.
+ add stubbed-out macrograph handling.
+ use fragment_remaining() and fragment_consumed() instead
of manually checking position / length in various places.
+ rename some local variables in string / extent / option
parsing
+ wrap some long lines.
+ move macrograph command handling out of the top-level.
* add a summary of the italic fonts loaded to -report-fonts
option.
* modify the font-lookup for italics to allow for “-i-” if no
match is found with slant “-o-” (prompted by patch by Ben
Wong).
* change default values for mkSamplePass and mkSampleSize to
reflect generally-improved locale support in various
operating systems (FreeBSD #219800).
* modify wcwidth.c to return -1 for non-Unicode values, and
adjust a couple of blocks to better match assumptions about
ambiguous-width characters in other implementations. Also
modify wcwidth.c to support configurable soft-hyphen, so
there is no drawback to using this version rather than a
system wcwidth.
* amend change made in patch #328 for cursor-visibility to
OBS-URL: https://build.opensuse.org/request/show/528278
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=146
- Patch #327 - 2016/10/07
* add a check in the function which handles end-of-line
wrapping to ensure that C1 controls are allocated one column
when allowC1Printable is set (Debian #738794).
* use consistent error-checking after strtol calls, fixes a
case where a query with OSC 6 did not ensure there was a
valid color number (report by Alex Smith).
* add -baudrate option, for testing ncurses.
* always generate the CASE_xxx symbols in VTparse.h and
Tekparse.h, as part of a change to improve debug-logging.
This makes the build always depend upon awk.
* modify allowC1Printable to disallow codes 160-254 as being
equivalent to codes 32-126 when parsing escape sequences
(Debian #839220).
* amend fix from patch #326 for TrueType fonts to exclude the
hidden character used for double-width cells (report by Grady
Martin).
* fix a typo in ctlseqs.ms
OBS-URL: https://build.opensuse.org/request/show/441219
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=142
- Patch #326 - 2016/09/25
* updated appdata file (report by Richard Hughes).
* improve discussion of the different terminal emulations
provided by xterm in the manual page.
* add examples of setting the icon title with/without the
window title in the manual (Debian #833984).
* correct a limit-check when using a numeric value for extended
Booleans e.g., *fullscreen:3 rather than a name such as
*fullscreen:never.
* add action allow-bold-fonts
* improved formatting fixes for manual page, using script to
find mismatches in spelling of resources, actions and menu
entries.
* improve documentation of logging resources.
* fix a special case of flickering cursor by adding
GraphicsExpose to the list of event types that should not
trigger making the mouse cursor visible (patch by Joe
Peterson).
* correct initialization of line-drawing in VT52-mode,
overlooked in changes for patch #297 (report/patch by Ben
Wiley Sittler).
* minor clarification of form-feed versus line-feed in
ctlseqs.ms (suggested by David Kemper).
* amend fix for Debian #738794 to restore a check for missing
characters which are not combining characters. Also fill in
a corresponding special case for TrueType fonts
(Debian #827905).
- Patch #325 - 2016/06/05
* improve manual page discussion of function keys (discussion
OBS-URL: https://build.opensuse.org/request/show/433932
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=140
- Patch #324 - 2016/03/10
* updated configure macro CF_LD_RPATH_OPT from ncurses changes.
* provide alternate fix for Juha Nurmela's report by turning on
POSIX signals if _POSIX_C_SOURCE is at least one. This is
done to improve the behavior if a direct child process
receives a STOP signal.
* revert change to CF_POSIX_C_SOURCE from patch #323
(reports by Ashish Shukla, Christian Weisgerber).
- Patch #323 - 2016/03/07
* updated appdata and desktop files to add keywords (report by
Richard Hughes).
* modify configure macro CF_POSIX_C_SOURCE to accommodate some
systems, e.g., FreeBSD, which have separated their
implementation specific preprocessor symbols from the POSIX
ones, requiring both to be defined (report by Juha Nurmela).
* change the directory to the current working dir of the child
process in exec-formatted and exec-selectable actions (patch
by Alexander Pohoyda).
* correct typo in xterm.man (patch by Larry Hynes).
* correct typo in ctlseqs.ms (report by Shriramana Sharma).
* add feature to support XHTML and SVG screen dumps (patch by
Jens Schweikhardt).
* correct response to DECRQSS when terminal id is less than 400
(patch by Iwamoto Kouichi).
OBS-URL: https://build.opensuse.org/request/show/372759
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=138
- Patch #322 - 2016/01/02
* fix regression due to incorrect fix for compiler warning when
allocating storage for /etc/shells (reports by Ashish Shukla,
Debian #809646).
- Patch #321 - 2015/12/31
* add resource keepClipboard, escape sequence and action
keep-clipboard.
* add optional feature to capture text copied to clipboard at
the time of copying rather than at the time the clipboard
contents are requested for pasting (patch by Milan Mehner).
* improve a special case where the -e option was used to pass a
single-quoted command via luit, by wrapping it in a “sh -c”
(report by Keith Hedger).
* minor fix for type-cleanliness when allocating storage for
/etc/shells (Tobias Stoeckmann).
* fix a typo in manual page (Dan Church).
* fix minor file-descriptor leak; after calling openpty, the
slave's file descriptor is not needed (report by Juha
Nurmela).
* editorial change to ctlseqs.ms (report by David Gomboc).
* minor updates for autoconf macros.
* update config.guess, config.sub
- vttest 20140305
* save/restore color enable-flag for menu 11.6 in a couple of
places so that the ISO-6429 tests do not reset it
unexpectedly.
* amend the REP test to not reset colors if it happens to be
run via the menu entry for BCE-related tests.
- vttest 20140116
* cosmetic changes (suggested by Itay Chamiel):
OBS-URL: https://build.opensuse.org/request/show/357555
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=134