- update urls to use https (its 2020 after all)
- Update to Patch#359 - 2020/08/17
* add special case in WriteText to allow colors 8-15 to override colorBDMode
* add utf8Weblike resource, to provide an alternate scheme for handling ill-formed UTF-8 sequences
* improve computation for the number of lines needed to scroll-up a SIXEL graphic
* correct manpage description for default value of disallowWindowOps from changes in xterm #331
* correct a loop starting-point in refresh_graphics from optimization in patch #358 changes
* add a new mouse mode 1016, which uses the same format as mode 1006, but sends the mouse's position in pixels
* fix an issue from patch #338 changes where only the first selection buffer specified in the request would be updated using OSC 52
* modify makefile/scripts to allow DESTDIR to prefix the target directory for desktop-file-install
* enable SIXEL feature by default.
* update config.guess, config.sub
* correct logic for decodeTerminalID changes in patch #357
* modify makefile to use plink.sh when linking test-programs, to fix build when using pcre
* build-fix for test_ptydata program
* several minor optimizations for the ReGIS and SIXEL features, improving performance by 10%.
* add resource decGraphicsID to allow displaying graphics when the emulation level would ordinarily disallow this
* add control sequences for fast switching of color palettes: XTPUSHCOLORS, XTPOPCOLORS, XTREPORTCOLORS
* amend change for soft-hyphen from patch #328 to avoid stripping replacement-characters which would be shown with malformed or overlong UTF-8 input.
* corrected an error-handling case in decodeUtf8, matching a similar fix in patch #268
* add a test-driver for ptydata.c
* minor cleanup of macros
* fix some errata in ctlseqs.ms
* allow immediate repaint-on-palette-changed if double-buffering is enabled.
* deprecate codes 10/11 in sgr push controls, changing those to 30/31, to avoid confusion with sgr 10-19.
* modify SGR parameter handling to stop if an unrecognized parameter is encountered, to guard against malformed or nonstandard sequences
* modify DECERA color for consistency with other erasures/clearing
* ECH should not be masked by DECSCA
* extend DECFRA and REP to accept any “graphic” character rather than just Latin1, etc.
* add -C option to 256colors2.pl and 88colors2.pl, to demonstrate mixed semicolon/colon separators which are implied by ECMA-48.
OBS-URL: https://build.opensuse.org/request/show/834743
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=189
- amend change in patch #352 for button-events to fix a case where some followup events were not processed soon enough (report/patch by Jimmy Aguilar Mena).
- handle MappingNotify X event, to improve recovery when switching keyboard configurations using xkbcomp (prompted by discussion with Frank Mosch, Debian #661295). There is more work needed here, possibly in the X libraries.
- improve discussion of mouse-mode in ctlseqs.ms (suggested by Igor van den Hoven).
- further improve checks for Xft max-advance-width to take into account fonts which use two cells for ambiguous width characters. Also improve the time used for these checks (reports by Yuri Pankov, Frank Mosch).
- fix a few spelling errors reported by codespell (report by Jens Schleusener).
- modify run-tic.sh to prefer development version of ncurses since changes to terminfo file in patch #345 rely upon bug-fixes in ncurses (prompted by discussion with Will Senn).
- Patch #352 - 2020/01/16
- adjust fontsize data to handle a minor inconsistency from recent Xft versions (Debian #880407, adapted from patch by Vincent Lefevre).
- add a table to the manual page description of forceBoxChars to alert the reader to the special characters aside from “line-drawing” which are drawn directly when this resource is set (Debian #931305).
- improve checkXft logic which attempts to detect fonts whose max-advance-width is inconsistent with the actual glyph widths. For some fonts, it is necessary to check additional characters (report/analysis by Jan Engelhardt).
- improve configure-checks for X headers and libraries on recent MacOS, which has moved those files under /usr/X11.
- improve portability of iconify/deiconify feature by taking into account some window managers which manipulate the EWMH _NET_WM_STATE property, adding/removing _NET_WM_STATE_HIDDEN rather than actually minimizing the window (prompted by discussion with Jörg Breitbart).
- improve workaround from patch #287 for the -iconic option when configured with toolbar by postponing the extra request for minimizing the window to the end of menu-initialization.
- modify xevents special-case for mouse-events to include button-events so that the meta key by itself can generate button-events (report/analysis by Mattias Engdegård).
- amend SGR-stack change from patch #348 to not associate bold attribute with background color (report by Nicholas Marriott).
- fix copy/paste error in manual page (patch by Larry Hynes).
- add definitions in xterm_io.h so that GNU/Hurd will use posix_openpty (patch by Samuel Thibault).
- build-fix in debug-tracing, for esctest.
- updated autoconf macros
- update config.guess
- Patch #351 - 2019/11/17
- correct logic in property_to_string for deciding when to fallback from UTF-8 decoding to ISO-8859-1 decoding, broken in xterm #350 (FreeBSD #241961).
- add -report-icons to help-message.
- improved autoconf macros:
- CF_ADD_LIBS: the change to filter out duplicates caused this to append rather than prepend. revise to fix that.
- CF_GCC_VERSION and CF_GCC_WARNINGS: move checks to distinguish icc/clang from gcc from the macro which handles the --enable-warnings option, to make this work without-warnings for the inline-checks.
- update config.guess, config.sub
- correct status in XTGETXRES replies when the resource was not found.
- fix some gcc, cppcheck, clang and coverity warnings.
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=182
- Patch #342
* limit mouse-button events to 11 buttons in the protocol
* correct calculaton for buttons past 11 (15 in extended proto)
* disable a supplementary check added in #341 that interferes with
fontconfig to select different sized bitmap fonts
- Patch #341
* Add options to mouse-codes script to demonstrate encoding works
* Allow mouse button numbers up to 11 using an offset of 128 for 8-11
* correct off-by-one right margin checks for double-width char adjustments
* modify the initial pattern passed to fontconfig to disallow color bmps
* improve error recovery for a case where fontconfig ignores the requested pattern
OBS-URL: https://build.opensuse.org/request/show/662929
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=163
- Patch #335 - 2018/08/14
* add colorInnerBorder resource to make a change from patch
#334 configurable (reports by H Merijn Brand, Gabriele
Balducci).
- Patch #334 - 2018/08/12
* modify Imakefile to reflect the fact that NetBSD no longer
has a working termcap emulation.
* add resource-setting validShells which can be used to augment
the system's /etc/shell (prompted by discussion with Paul
Lampert).
* stifle some useless warnings from lintian in test-packages.
* add the ncurses extension “RGB” to the responses for the
termcap-query feature.
* improved getopts-handling in sample scripts.
* fix some warnings from gcc8 and clang --analyze.
* update note about incorrect documentation for DECRQSS to
include VT525 (report by Markus Schmidt).
* correct check for default-values in rectangular parsing; a
zero counts as a missing or default parameter
(report/testcase by Markus Schmidt).
* correct some ranges in the ambiguous[] table in wcwidth
(adapted from patch by KUGA Tsutomu).
* fix a special case with faint video attribute incorrectly
combined with default color.
* add private control XTREPORTSGR for reporting
video-attributes and color on a rectangle, and script
report-sgr.pl to demonstrate it.
* modify some of the markup in ctlseqs.ms to work around
groff's reassignment of ASCII punctuation characters as
documented in groff_char(7).
OBS-URL: https://build.opensuse.org/request/show/631631
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=158
- Patch #332
- spec-cleaned
- drop support for unsupported distros
* add a GetChecksum item to disallowedWindowOps
* improve notes in ctlseqs.ms which mention where various controls originated.
* add control sequences for querying the X display size and the character size,
both in pixels to help eliminate some of the constants in esctest.
* fixes prompted by review of George Nachman's esctest script:
* add a null-pointer check and a limit-check in xtermCheckRect.
* correct limit-check for right-margin when processing autowrapping if xterm
is not built for wide-characters.
* repair logic in RIS to reset 132-column mode when an escape sequence is
used to enable 80/132-column switching.
* correct array-limit for EWMH working state.
* further improve limit-checks versus assert's.
* correct order of check-margins and move-to-left margin for DL and IL.
* modify reverse-wrap to pay attention to top/bottom margins as it has done
for left/right margins since patch #279.
* modify behavior of DECFI and DECBI to not index the screen at the left/right
edge of the display unless those happen to be the left/right margins.
* add case for VT320 DSR response for keyboard status.
* improve check for valid shell path using getusershell and endusershell
if available, in case /etc/shells does not exist/
* modified configure checks for groff and man2html, to use the latter by default,
but allowing mandoc as a partial replacement for former.
OBS-URL: https://build.opensuse.org/request/show/600315
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=153
- Patch #331 - 2017/12/30
* add workaround for improper grayscale adjustments made in
FreeType library, exposed by changes to rounding in 2.8.1,
which shows up as a gap in line-drawing characters
* improve a special case where a non-Unicode font's line-drawing
characters were not used, when specifying it via the utf8Fonts
resource.
* replace constant 10msec delay for next X event with new resource
nextEventDelay, and reduce that to 1msec to accommodate faster
machines than used when -hold was implemented in 1999
* add scroll-to action, which simplifies binding a key to scroll
to the beginning or end of the saved-lines
* add building blocks for alternate screen and/or title-stack
features in the terminfo file.
* improve calculations for cell-data size.
* configure script: enable XHTML/SVG screen dumps by default.
* configure script: enable 256-colors by default.
* update config.guess, config.sub
* configure script: option for --with-man2html to use improved
script by default.
* add case for private mode 1044 in DECRQM, to report the
keepClipboard resource setting and corresponding menu entry.
* fix an inconsistency between private mode 12 (the AT&T 610
cursor blink) and DECSCUSR: the former relied on having the
cursorBlink resource set initially to enable the escape sequence,
while the latter does not.
* add private modes 13 and 14, as well as resource cursorBlinkXOR
to allow better control over the cursor-blinking state
* modify the html and svg screen dumps to support direct color
* modify media copy (screen-printing) to support the same SGR
codes as DECRQSS, including 88/256 indexed color as well as
direct color.
* improve options-parsing for query-status.pl script.
* modify parsing of SGR direct-color control making color space
identitier optional. The corresponding DECRQSS reply always
returns an empty (default) field for the identifier.
* add wide-attributes to DECRQSS reply for SGR.
* add private mode 1046 to help with scripting applications.
* correct expression used for readline-flags in DECRQM; to test
the current flag rather than information stacked within the
same variable.
* correct typo in ctlseqs.ms reference to ISO-8613-6
* fix lintian warning for test-package.
* fix typo in DECRQSS for SGR 48, which printed the foreground
value for colors past 15. Also use colon delimiter for codes
38/48 in response
* improve workaround for Debian #542434 by using the font's
maximum width when no ISO-8859-1 glyphs are provided
* work around a special case of Xft's mismanagement of its
cached data by adding a check before the -report-fonts option
to ensure that it does not use an XftPattern which may have been
freed during a call to XftFontOpenPattern.
* improve manual page description of regex option for onXClicks
resources
* add directColor resource.
* additional manpage macro cleanup
* add optional support for direct-colors
* improve legacy/NRC character set mapping:
+ enable alternate NRC set designators for French and French
Canadian, ‘9’ and ‘f’ respectively, as documented in ctlseqs.
(‘9’ is documented for VT510, ‘f’ is a Kermit feature).
+ correct the Unicode value in the DEC Technical table to show
capital delta.
+ referring to
* http://vt100.net/docs/vt220-rm/table2-3b.html
* http://vt100.net/docs/vt320-uu/appendixe.html
+ add entries for the DEC Supplemental Graphics table to display
0x28/0xa8 as ¤ and 0x5d/0xdd as Ÿ.
referring to
* http://www.vt100.net/charsets/technical.html
* alter the Unicode values used for 0x2b through 0x2c to use
curly braces to work with the “middle” parts displayed with
0x2f and 0x30.
+ modify the VT220 “Supplemental” table, giving a hint that it
was probably meant to be “Supplemental Graphics” and is the
same as VT320's table.
* quiet a few font-warnings when a derived fontname cannot be
opened, overlooked in refactoring of font resources in patch #328
* correct error response for DECRQSS broken in cleanup of
Coverity reports in patch #288
* improve DECRPM responses by returning mode not recognized for
modes which may not be settable due to the selected
decTerminalID resource
* correct logic for print-immediate action, and enable
corresponding menu entry
* add configure option --with-pcre2
* fix a misspelled subsection title in ctlseqs.ms and add a note
regarding blink which was rendered as bold in X11R6. Blinking
text was implemented in Patch #60.
* fix typos in xterm.man
* fix typography in xterm.man
* fix typo in INSTALL
* add xterm-direct terminal description based on changes
introduced in patch #277, and relying upon ncurses RGB extension.
* modify xterm-new terminal description to use ECMA-48 REP,
reflecting its use in xterm since patch #32 (1996).
* clarify comment in ctlseqs.ms regarding blink: it has been
part of xterm since patch #60 (1998).
* update ftp URLs in documentation.
OBS-URL: https://build.opensuse.org/request/show/572173
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=151
- Patch #330 - 2017/06/20
* updates for ReGIS (Ross Combs):
+ remove redundant text command error check which broke
T(B) and T(E).
+ retain the loading alphabet number across multiple “L”
commands.
+ add S(T) delay handler.
+ fix some color handling error messages.
+ add stubbed-out macrograph handling.
+ use fragment_remaining() and fragment_consumed() instead
of manually checking position / length in various places.
+ rename some local variables in string / extent / option
parsing
+ wrap some long lines.
+ move macrograph command handling out of the top-level.
* add a summary of the italic fonts loaded to -report-fonts
option.
* modify the font-lookup for italics to allow for “-i-” if no
match is found with slant “-o-” (prompted by patch by Ben
Wong).
* change default values for mkSamplePass and mkSampleSize to
reflect generally-improved locale support in various
operating systems (FreeBSD #219800).
* modify wcwidth.c to return -1 for non-Unicode values, and
adjust a couple of blocks to better match assumptions about
ambiguous-width characters in other implementations. Also
modify wcwidth.c to support configurable soft-hyphen, so
there is no drawback to using this version rather than a
system wcwidth.
* amend change made in patch #328 for cursor-visibility to
OBS-URL: https://build.opensuse.org/request/show/528278
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=146
- Patch #327 - 2016/10/07
* add a check in the function which handles end-of-line
wrapping to ensure that C1 controls are allocated one column
when allowC1Printable is set (Debian #738794).
* use consistent error-checking after strtol calls, fixes a
case where a query with OSC 6 did not ensure there was a
valid color number (report by Alex Smith).
* add -baudrate option, for testing ncurses.
* always generate the CASE_xxx symbols in VTparse.h and
Tekparse.h, as part of a change to improve debug-logging.
This makes the build always depend upon awk.
* modify allowC1Printable to disallow codes 160-254 as being
equivalent to codes 32-126 when parsing escape sequences
(Debian #839220).
* amend fix from patch #326 for TrueType fonts to exclude the
hidden character used for double-width cells (report by Grady
Martin).
* fix a typo in ctlseqs.ms
OBS-URL: https://build.opensuse.org/request/show/441219
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=142
- Patch #326 - 2016/09/25
* updated appdata file (report by Richard Hughes).
* improve discussion of the different terminal emulations
provided by xterm in the manual page.
* add examples of setting the icon title with/without the
window title in the manual (Debian #833984).
* correct a limit-check when using a numeric value for extended
Booleans e.g., *fullscreen:3 rather than a name such as
*fullscreen:never.
* add action allow-bold-fonts
* improved formatting fixes for manual page, using script to
find mismatches in spelling of resources, actions and menu
entries.
* improve documentation of logging resources.
* fix a special case of flickering cursor by adding
GraphicsExpose to the list of event types that should not
trigger making the mouse cursor visible (patch by Joe
Peterson).
* correct initialization of line-drawing in VT52-mode,
overlooked in changes for patch #297 (report/patch by Ben
Wiley Sittler).
* minor clarification of form-feed versus line-feed in
ctlseqs.ms (suggested by David Kemper).
* amend fix for Debian #738794 to restore a check for missing
characters which are not combining characters. Also fill in
a corresponding special case for TrueType fonts
(Debian #827905).
- Patch #325 - 2016/06/05
* improve manual page discussion of function keys (discussion
OBS-URL: https://build.opensuse.org/request/show/433932
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=140
- Patch #324 - 2016/03/10
* updated configure macro CF_LD_RPATH_OPT from ncurses changes.
* provide alternate fix for Juha Nurmela's report by turning on
POSIX signals if _POSIX_C_SOURCE is at least one. This is
done to improve the behavior if a direct child process
receives a STOP signal.
* revert change to CF_POSIX_C_SOURCE from patch #323
(reports by Ashish Shukla, Christian Weisgerber).
- Patch #323 - 2016/03/07
* updated appdata and desktop files to add keywords (report by
Richard Hughes).
* modify configure macro CF_POSIX_C_SOURCE to accommodate some
systems, e.g., FreeBSD, which have separated their
implementation specific preprocessor symbols from the POSIX
ones, requiring both to be defined (report by Juha Nurmela).
* change the directory to the current working dir of the child
process in exec-formatted and exec-selectable actions (patch
by Alexander Pohoyda).
* correct typo in xterm.man (patch by Larry Hynes).
* correct typo in ctlseqs.ms (report by Shriramana Sharma).
* add feature to support XHTML and SVG screen dumps (patch by
Jens Schweikhardt).
* correct response to DECRQSS when terminal id is less than 400
(patch by Iwamoto Kouichi).
OBS-URL: https://build.opensuse.org/request/show/372759
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=138
- Patch #322 - 2016/01/02
* fix regression due to incorrect fix for compiler warning when
allocating storage for /etc/shells (reports by Ashish Shukla,
Debian #809646).
- Patch #321 - 2015/12/31
* add resource keepClipboard, escape sequence and action
keep-clipboard.
* add optional feature to capture text copied to clipboard at
the time of copying rather than at the time the clipboard
contents are requested for pasting (patch by Milan Mehner).
* improve a special case where the -e option was used to pass a
single-quoted command via luit, by wrapping it in a “sh -c”
(report by Keith Hedger).
* minor fix for type-cleanliness when allocating storage for
/etc/shells (Tobias Stoeckmann).
* fix a typo in manual page (Dan Church).
* fix minor file-descriptor leak; after calling openpty, the
slave's file descriptor is not needed (report by Juha
Nurmela).
* editorial change to ctlseqs.ms (report by David Gomboc).
* minor updates for autoconf macros.
* update config.guess, config.sub
- vttest 20140305
* save/restore color enable-flag for menu 11.6 in a couple of
places so that the ISO-6429 tests do not reset it
unexpectedly.
* amend the REP test to not reset colors if it happens to be
run via the menu entry for BCE-related tests.
- vttest 20140116
* cosmetic changes (suggested by Itay Chamiel):
OBS-URL: https://build.opensuse.org/request/show/357555
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=134
- Patch #320 - 2015/08/28
* correct documentation for %t format (report by Martin
Tournoij).
* add %R for consistency to exec-formatted() and
* add %r format to exec-formatted() and insert-formatted()
actions (patch by Martin Tournoij).
* Amend fix for Debian #794201 (report forwarded from Christian
- Patch #319 - 2015/08/19
* add a section to ctlseqs.ms discussing control sequences and
ECMA-48, to explain why C1 controls do not occur in the
decoded characters from UTF-8 byte streams (prompted by
discussion with Poul-Henning Kamp).
* modify check for cursor-theme from patch #301 to also check
if the resource Xcursor.theme is set to a nonempty value
before fallback to xterm's own dummy theme (request by Robert
Kloefkorn).
* explain in ctlseqs.ms that some keys which normally send
SS3-prefixes are changed to CSI-prefixes if key-modifiers are
* correct double-free of font information when multiple
problems are found, particularly for the wide fonts loaded
via the -wc option (report/testcase by Nelson Beebe).
* make configure option --enable-builtin-xpms actually work
* correct combination of -ls and -e options for utempter
* NetBSD build-fix for OPT_RENDERFONT versus OPT_SHIFT_FONTS
+ split pixel-based and coord-based functions with common
parts factored out to a "raw" function
+ add a "step" variant which loads a single PV digit
* make the graphic dirty upon resize or clear, fixing some
* fixes scrolling to use user coordinates and move in the
* several fixes/improvements for ReGIS whitespace and
OBS-URL: https://build.opensuse.org/request/show/329073
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=132
- Update to version 318
* rename new(er) configure option --enable-initial-erase to
--enable-pty-erase, since that conflicted with an existing
option (report by Jens Schweikhardt).
* fix cut/paste error in --with-builtin-xpms configure option
(reports by Jens Schweikhardt, Ross Combs).
* fix minor formatting issue in xterm manual (report by Jens
Schweikhardt).
* eliminate unnecessary "#(vi" markers in autoconf macros by
using "(" to begin case-statement cases (suggested by Jens
Schweikhardt).
* minor fixes to improve const usage (Ross Combs).
- Add pkgconfig and groff as dependency as configure is looking
for them
OBS-URL: https://build.opensuse.org/request/show/298033
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=129
- Patch #313 - 2014/11/28
* add regisScreenSize resource setting to allow custom
screensizes for ReGIS graphics (prompted by discussion with
Scott Froebe).
* fix some minor issues in manpage (Jens Schweikhardt).
* improve ReGIS font-handling (Ross Combs):
+ remove "random junk" generation for unknown characters
+ add xterm extension to load user glyphs for alphabet 0
+ add xterm extension to specify loading an alphabet from a
font by name
+ fix bug with use of empty alphabet slots which caused slot
0 to be clobbered
+ update/clarify ReGIS-related comments
+ add DECprint extension for printing/clearing the screen
(only clearing is performed)
* improve ReGIS colorspec conversion (Ross Combs):
+ avoid some floating point math for colorspace conversion
+ move two copies of colorspec parsing to a single function
+ change colorspec parsing to handle components being out of
order or with spaces and commas between them
+ add support for an extension where RGB components can be
given instead of HLS
* improve use of const, e.g., for the LineData pointers (patch
by Ross Combs).
* clip of graphics that overlap the scrollback buffer and alt
screen (patch by Ross Combs).
* amend change to focus-change events in patch #287 to limit it
to suppressing the reset of the urgency-hint, because some
useful FocusOut events were lost (report by Joe Peterson).
* modify dpkg build-script to configure xterm-dev as an
OBS-URL: https://build.opensuse.org/request/show/279963
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=124
- Patch #311 - 2014/09/18
* mention xclip in manpage as an alternative workaround for
copying clipboard data, noting that selectToClipboard (from
patch #209) is the recommended approach (Debian #639094).
* correct comparison in do_select_regex() of working position
against starting column.
* correct initialization for regular-expression feature of
exec-selectable and insert-selectable actions (Debian
#758633).
* modify logic for exec-formatted and insert-formatted actions
to ensure that the formatting occurs just after the selection
is received (Debian #758633).
* account for state of reverse-video in special case of cursor
coloring (Debian #759734).
* fix a sign-extension problem in ReGIS support, as well as
correcting a case where ignored-characters were not really
ignored (patch by Ross Combs).
* Enable the "Escape Sequence" menu entry when an OSC 50 is
received. Also disable it if the escape sequence specifies no
font (Debian #760208).
* improve fix for the fontsel menu entry from patch #304:
because the recovery used the "current font", it would fail
if one first selected a valid font, then an invalid font
(Debian #760207).
* correct an off-by-one in limit-check for ScrnLimitChar
function (report by Egmont Koblinger).
OBS-URL: https://build.opensuse.org/request/show/252225
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=111
- Patch #309 - 2014/07/13
* modify configure script to work around debris left by XQuartz
upgrades.
* modify test-package scripts to enable ReGIS graphics.
* improvements/additions to ReGIS graphics, e.g., drawing text
(Ross Comb).
* add --with-Xaw3dxft, to link with Xaw 3d xft library
(Stephen P Wall).
* amend reset for cursor-shape to take into account
cursorUnderline resource (report by Christian Weisgerber).
* update config.guess, config.sub
OBS-URL: https://build.opensuse.org/request/show/241234
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=103
- Patch #307 - 2014/06/17
* fill background for top/bottom parts of
double-width/double-height characters, to cover occasional
gaps due to bitmap font-scaling (report by Egmont Koblinger).
* amend resets for keyboard-type, pointer-mode and title-modes
from xterm #305 changes to account for resource settings
(Debian #751351).
* modify printAttributes feature to include new SGR codes.
* modify cursor show/hide logic to work with italic fonts.
* do clipping and filling for a case with bitmap-fonts and
italics when the font server returns only a "close" match
(report/testcase by Egmont Koblinger).
* adjust loop comparison for underlining to display underlines
on 5x8 font as in patch #304 (Debian #750733).
* amend fix for Freedesktop #15979 (Debian #750733).
* amend xterm.appdata.xml, making it validate with current
schema.
OBS-URL: https://build.opensuse.org/request/show/237953
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=100
- Patch #306 - 2014/06/03
* fixes for display-errors in new SGR codes (report by Egmont
Koblinger).
- Patch #305 - 2014/06/02
* add xterm.appdata.xml (request by Richard Hughes). By the way,
none of the released validators yet handle <licence> tags (or
<metadata_license>, etc).
* fix memory leaks in bitmap font-name caching.
* other changes to hard-reset behavior:
+ reset keyboard-type on hard-reset.
+ reset pointer-mode (pointerMode) on hard-reset
+ reset title-modes (titleModes) on hard-reset
+ reset cursor-shape on hard or soft-reset
+ reset LEDs on hard-reset.
+ reset DECSACE on hard-reset.
* reset bracketed-paste mode on hard-reset (suggested by Egmont
Koblinger).
* modify UTF-8 decoder to account for allowC1Printable resource.
* revise getXftColor to ensure that its sequence number will not
overflow in long-running sessions.
* minor fix to selection to prevent hidden character from being
returned in selection data (report by Egmont Koblinger).
* add -sh to help-message.
* amend check for incomplete fonts to always decide that a
character is missing if the font lacks per-character metrics
(prompted by Freedesktop #15979).
* minor reorganization to implement “filler” SGR features. There
are no established applications which rely upon these; some
people find them amusing.
OBS-URL: https://build.opensuse.org/request/show/236641
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=96
- Patch #304 - 2014/05/03
* add debugging check for parsing table entries, fixed a few
inconsistencies.
* handle utmp/utmpx strings consistently with new function that
null-pads unused locations.
* build-fix for imake configuration with FreeBSD 9 and later,
to account for replacing utmp with utmpx.
* improve handling of the fontsel (font-selection) menu item:
+ initialize the menu entry differently if the toolbar
configuration is used, i.e., enabling it without attempting
to use the current selection as a font name. Because of the
way in which the toolbar is setup, this attempt usually
failed, and would result in a warning.
+ if the menu action fails, e.g., no font can be loaded for
the given selected name, then recover by resuming with the
current font. Before, the recovery went to the default
font. That was done to work around missing bitmap font in
patch #276.
* document OSC 119 in the control sequences listing (report by
Egmont Koblinger).
* modify special handling of XF86Paste or SunPaste keysyms (see
patch #227) to use the standard shift/lock modifiers in case
those are, for example, used in level 3 in an XKB file (patch
by Matthieu Herrb).
* configure macro updates:
+ drop the -no-gcc option from CF_INTEL_COMPILER
+ modify CF_XOPEN_SOURCE to suppress the check for defining
_XOPEN_SOURCE on Solaris
* reduce bss storage used for ReGIS/Sixel modules, as well as
cleanup storage usage in other modules.
OBS-URL: https://build.opensuse.org/request/show/232778
OBS-URL: https://build.opensuse.org/package/show/X11:terminals/xterm?expand=0&rev=92
