------------------------------------------------------------------- Mon Oct 10 09:11:29 UTC 2016 - mfilka@suse.com - do not duplicate work of network service at the beginning of AutoYaST's second stage - not loading modules and so on. - 3.2.4 ------------------------------------------------------------------- Fri Oct 7 15:16:11 UTC 2016 - kanderssen@suse.com - If an interface is not configured yet then just set the interface link, the backend should handle at least the up event. (bsc#991694) - 3.2.3 ------------------------------------------------------------------- Fri Oct 7 15:12:05 UTC 2016 - ancor@suse.com - Extra space in the remote administration dialog (bsc#988904) ------------------------------------------------------------------- Thu Oct 6 09:22:25 UTC 2016 - mfilka@suse.com - Use full interface up / down instead of setting just link up / down to allow proper update of interface's configuration. (bsc#991694) - 3.2.2 ------------------------------------------------------------------- Wed Oct 5 13:49:08 UTC 2016 - ancor@suse.com - If WIFI is configured during installation, make sure the packages required for WIFI to work are installed in the resulting system (bsc#1002700) - 3.2.1 ------------------------------------------------------------------- Wed Sep 21 09:57:30 UTC 2016 - jreidinger@suse.com - reduce rpm build time (bsc#999203) - 3.2.0 ------------------------------------------------------------------- Wed Sep 7 11:23:16 UTC 2016 - mfilka@suse.com - bnc#993587 - extended fix from 3.1.168 to cover also virtual interfaces - 3.1.170 ------------------------------------------------------------------- Sat Sep 3 20:02:55 UTC 2016 - mfilka@suse.com - bnc#988157 - disable DHCP autoconfiguration in installer when an interface configuration is provided via linuxrc - 3.1.169 ------------------------------------------------------------------- Wed Aug 24 10:54:55 UTC 2016 - mfilka@suse.com - bnc#993587 - installer is able to newly configured set devices up in case of ssh/vnc installation - 3.1.168 ------------------------------------------------------------------- Fri Aug 19 08:59:14 UTC 2016 - mfilka@suse.com - bnc#991382 - init and store IFPLUGD_PRIORITY properly - 3.1.167 ------------------------------------------------------------------- Thu Aug 18 08:52:41 UTC 2016 - mfilka@suse.com - bnc#991486 - extended fix for this bug from 3.1.163. Do not report invalid names incorrectly - 3.1.166 ------------------------------------------------------------------- Thu Aug 11 19:02:36 UTC 2016 - mfilka@suse.com - bnc#985905 - do not limit number of bonding slaves to 10 - 3.1.165 ------------------------------------------------------------------- Thu Aug 11 08:23:00 UTC 2016 - mfilka@suse.com - bnc#988786 - Create bridge when proposing configuration for VM host. - 3.1.164 ------------------------------------------------------------------- Wed Aug 10 18:07:12 UTC 2016 - ancor@suse.com - Improved parsing of vlan ids that are longer than one character. ------------------------------------------------------------------- Wed Aug 10 16:07:26 UTC 2016 - mfilka@suse.com - bnc#991486 - Do not allow creating device with oversized configuration name. - 3.1.163 ------------------------------------------------------------------- Tue Aug 9 12:29:35 UTC 2016 - schubi@suse.de - Added entry "s390-devices" to the AutoYaST schema file. Bug similar bnc#954412. - 3.1.162 ------------------------------------------------------------------- Tue Aug 9 12:25:01 UTC 2016 - mfilka@suse.com - bnc#991920 - do not crash with internal error when renaming unconfigured device - 3.1.161 ------------------------------------------------------------------- Tue Aug 2 12:40:53 UTC 2016 - mfilka@suse.com - bnc#991382 - Do not crash with internal error when using "On Cable Connection" device activation mode. - 3.1.160 ------------------------------------------------------------------- Tue Jul 12 10:41:58 CEST 2016 - schubi@suse.de - Added entry "dhclient_set_hostname" to the AutoYaST schema file. Bug similar bnc#954412. - 3.1.159 ------------------------------------------------------------------- Thu Jun 23 06:54:43 UTC 2016 - mfilka@suse.com - bnc#970320, bnc#865132, bnc#852604 - do not overwrite Postfix MTA configuration when saving network setup - 3.1.158 ------------------------------------------------------------------- Tue Jun 21 05:37:31 UTC 2016 - igonzalezsosa@suse.com - bsc#984146 - set AutoYaST keep_install_network parameter to 'true' by default - restore the default behavior present in SLE 12 SP1 and openSUSE Leap 42.1 - 3.1.157 ------------------------------------------------------------------- Tue Jun 14 05:43:26 UTC 2016 - mfilka@suse.com - bnc#983201 - do not crash with internal error when configuring new device on s390 - 3.1.156 ------------------------------------------------------------------- Mon Jun 13 17:48:52 UTC 2016 - mfilka@suse.com - fate#318787 - detect modifications when closing module, do not restart when not needed. - 3.1.155 ------------------------------------------------------------------- Wed Jun 1 14:16:08 UTC 2016 - igonzalezsosa@suse.com - Drop yast2-network-devel-doc package (fate#320356) - 3.1.154 ------------------------------------------------------------------- Tue May 31 11:31:22 UTC 2016 - mfilka@suse.com - bnc#981842 - enable / disable vncmanager only when installed to avoid failures in systemd calls - 3.1.153 ------------------------------------------------------------------- Thu May 19 21:53:16 UTC 2016 - mfilka@suse.com - fate#319319 - implemented support for vncmanager in Remote module. Thanks to msrb@suse.cz. - 3.1.152 ------------------------------------------------------------------- Tue May 17 16:04:49 UTC 2016 - mfilka@suse.com - bnc#971175 - /etc/hosts is correctly updated with static address, hostname when static net configuration is done via linuxrc and hostname is provided by AY profile - 3.1.151 ------------------------------------------------------------------- Fri May 13 10:19:39 UTC 2016 - knut.anderssen@suse.com - fate#315995 - Added physical port id to device overview and bond slaves item description if supported. - Warn the user when two or more bonded interfaces share the same physical port. - Available interfaces for bonding in bond slaves tab are now sorted and moving them up or down maintain the interface selected. - 3.1.150 ------------------------------------------------------------------- Mon May 2 11:35:45 UTC 2016 - mfilka@suse.com - bnc#977953 - added dependency on yast2-proxy. "yast2 lan" won't fail with internal error (missing Proxy module), when yast2-network is installed into a minimal server installation. - 3.1.149 ------------------------------------------------------------------- Tue Apr 19 08:01:16 UTC 2016 - mfilka@suse.com - bnc#966694 - TigerVNC Viewer Error: No matching security types. Do not touch VNC arguments when enabling or disabling it. Thanks to msrb@suse.com for the patch. - 3.1.148 ------------------------------------------------------------------- Tue Apr 12 08:04:07 UTC 2016 - mfilka@suse.com - bnc#974910 - fixed internal error when no "interfaces" group is found in an AY profile - 3.1.147 ------------------------------------------------------------------- Mon Apr 11 09:42:20 UTC 2016 - mfilka@suse.com - bnc#955217, bnc#956605 - fixed internal error caused by the previous patch - 3.1.146 ------------------------------------------------------------------- Mon Apr 4 17:24:13 UTC 2016 - mfilka@suse.com - bnc#955217, bnc#956605 - unified udev rule handling by always doing it in the 1st stage of installation. - 3.1.145 ------------------------------------------------------------------- Sun Mar 6 21:15:08 UTC 2016 - mfilka@suse.com - bnc#920089 - fix by Damir Porobic - fixed layout of dialog for new route definition - 3.1.144 ------------------------------------------------------------------- Mon Feb 22 11:52:09 UTC 2016 - mfilka@suse.com - bnc#960703 - sometimes wicked was started instead of NetworkManager in case of AY installation. Moreover it could happen that both services were "half-started" and network setup got broken. - bsc#903190 - Recognized netcard with sub_class_id 07 as InfiniBand (ib) which now are not filtered out (knut.anderssen@suse.com). - 3.1.143 ------------------------------------------------------------------- Fri Jan 29 15:21:36 UTC 2016 - knut.anderssen@suse.com - Removed old testsuites tests and autotools, so yast2-testsuite is not required anymore (fate#314695). - 3.1.142 ------------------------------------------------------------------- Fri Jan 22 13:24:15 UTC 2016 - mvidner@suse.com - Fixed an Internal error when aborting the configuration of a WiFi interface (bsc#950902). - 3.1.141 ------------------------------------------------------------------- Wed Dec 2 13:26:12 UTC 2015 - mfilka@suse.com - bnc#957377 - When exporting AutoYaST profile, it contains dns configuration even when this config was provided via linuxrc. - 3.1.140 ------------------------------------------------------------------- Mon Nov 30 09:05:24 UTC 2015 - mfilka@suse.com - bnc#951330 - drop record from /etc/hosts when deleting nic configuration - bsc#954412 (igonzalezsosa@suse.com) - Fix validation of AutoYaST profiles - 3.1.139 ------------------------------------------------------------------- Wed Nov 25 21:01:49 UTC 2015 - mfilka@suse.com - bnc#956605 - Write udev rules for renamed devices for non ssh / vnc AutoYaST installations - 3.1.138 ------------------------------------------------------------------- Mon Nov 23 09:54:34 UTC 2015 - mfilka@suse.com - bnc#956012 - When exporting AutoYaST profile, it contains route definitions even when these routes were configured using linuxrc. - 3.1.137 ------------------------------------------------------------------- Mon Nov 16 21:33:18 UTC 2015 - mfilka@suse.com - bnc#955217 - do not raise internal error during AY installation with profile containing device renaming rule for unconfigured interface - 3.1.136 ------------------------------------------------------------------- Mon Nov 16 05:52:07 UTC 2015 - mfilka@suse.com - bnc#944349 - do not set links down when running AY installation over vnc. VNC installation do not freeze. - renaming network devices during ssh/vnc installation is supported -3.1.135 ------------------------------------------------------------------- Sun Nov 8 20:55:53 UTC 2015 - mfilka@suse.com - bnc#944349 - do not set links down when running AY installation over ssh. SSH installation do not freeze. - 3.1.134 ------------------------------------------------------------------- Thu Oct 8 12:02:44 UTC 2015 - mvidner@suse.com - Fixed "Relax-NG parser error : Some defines for ipv6_forward needs the combine attribute" when checking validity of any AutoYaST profile (bsc#948206). - 3.1.133 ------------------------------------------------------------------- Tue Oct 6 16:44:44 UTC 2015 - mfilka@suse.com - bnc#900647 - fixed to accept an empty domain in /etc/hostname - 3.1.132 ------------------------------------------------------------------- Thu Oct 1 07:26:55 UTC 2015 - mvidner@suse.com - Moved "Network Settings" into "System" group also in the Gnome/GTK control center (FATE#318804, bsc#867809). - 3.1.131 ------------------------------------------------------------------- Wed Sep 23 09:06:08 UTC 2015 - mfilka@suse.com - bnc#866742 - Do not fail with internal error when cloning configuration twice in a row - 3.1.130 ------------------------------------------------------------------- Wed Sep 16 09:06:48 UTC 2015 - mfilka@suse.com - bnc#945947 - Routing module returns correct return code when invoked from command line - 3.1.129 ------------------------------------------------------------------- Thu Aug 27 20:29:41 UTC 2015 - mfilka@suse.com - bnc#846201 - made bridge port selection persistent across tab switching - 3.1.128 ------------------------------------------------------------------- Tue Aug 18 12:29:56 UTC 2015 - mfilka@suse.com - bnc#940892 - fixed internal error when importing AY profile - 3.1.127 ------------------------------------------------------------------- Tue Aug 18 09:35:05 UTC 2015 - igonzalezsosa@suse.com - bsc#941948 - lan_auto client returns value properly - 3.1.126 ------------------------------------------------------------------- Mon Aug 10 08:15:39 UTC 2015 - mfilka@suse.com - bnc#916013 - IPv4 forwarding always enabled upon finishing setup - 3.1.125 ------------------------------------------------------------------- Wed Aug 5 08:18:49 UTC 2015 - mfilka@suse.com - bnc#916013 - IPv6 forwarding setup is stored persistently - 3.1.124 ------------------------------------------------------------------- Fri Jul 31 13:41:08 UTC 2015 - ancor@suse.com - bnc#940192, bnc#935937 - fixed crash deleting interfaces using CLI (yast lan delete) - 3.1.123 ------------------------------------------------------------------- Wed Jul 1 11:21:36 UTC 2015 - mfilka@suse.com - bnc#864264 - fixed internal error in adding alias - 3.1.122 ------------------------------------------------------------------- Tue Jun 30 16:18:26 UTC 2015 - mvidner@suse.com - Fixed warnings like 'duplicated key at line 230 ignored: "rt73usb"' (boo#930870) (recording a fix present in 3.1.116 already). ------------------------------------------------------------------- Thu Jun 25 14:15:06 UTC 2015 - mfilka@suse.com - bnc#922765, bnc#923990 - fixed default domain proposal - 3.1.121 ------------------------------------------------------------------- Thu Jun 18 08:56:20 UTC 2015 - mfilka@suse.com - bnc#930448 - display proper startmode description in Overview dialogue - 3.1.120 ------------------------------------------------------------------- Mon Jun 15 10:46:18 UTC 2015 - igonzalezsosa@suse.com - Fix handling of AutoYaST parameter keep_install_network - 3.1.119 ------------------------------------------------------------------- Thu Jun 11 07:51:16 UTC 2015 - mfilka@suse.com - fate#318804 - moved "Network Settings" into "System" group in YaST control centre - 3.1.118 ------------------------------------------------------------------- Wed Jun 10 08:37:59 UTC 2015 - mfilka@suse.com - bnc#934180 - fixed internal error in lan AutoYaST client. - 3.1.117 ------------------------------------------------------------------- Mon Jun 8 09:58:46 UTC 2015 - mfilka@suse.com - bnc#874259 - keep device configuration provided via linuxrc when autoyast keep_install_network is set - 3.1.116 ------------------------------------------------------------------- Mon May 18 12:59:27 CEST 2015 - locilka@suse.com - bsc#916376 - proposing iSCSI-related configuration in firewall proposal in first stage if iSCSI is in use - 3.1.115 ------------------------------------------------------------------- Mon Apr 27 07:06:18 UTC 2015 - mfilka@suse.com - bnc#912904 - do not crash when adding new device and proposed configuration name is changed to new one - bnc#914833 - do not crash when renaming virtual device via hardware tab - bnc#910337 - initialize configuration name in Hardware tab correctly. It means according device type. Also uses custom name if user used nonstandard one. - bnc#905738 - udev rules provided by AutoYaST profile gets applied - bnc#918356 - populate bond slave candidates list with proper device names - 3.1.114 ------------------------------------------------------------------- Wed Jan 28 13:12:16 UTC 2015 - lslezak@suse.cz - fixed a build failure when building against the latest yast2 package - 3.1.113 ------------------------------------------------------------------- Tue Dec 23 10:52:11 UTC 2014 - mvidner@suse.com - Removed a bash specific post script with a workaround for an ancient bug (bnc#39842). - 3.1.112 ------------------------------------------------------------------- Thu Dec 4 09:50:29 UTC 2014 - jreidinger@suse.com - remove X-KDE-Library from desktop file (bnc#899104) ------------------------------------------------------------------- Fri Nov 28 08:51:22 UTC 2014 - mfilka@suse.com - bnc#906694 - fixed exception raised due to modifying frozen string when running in localized mode - 3.1.110 ------------------------------------------------------------------- Fri Oct 17 07:45:24 UTC 2014 - mfilka@suse.com - bnc#898250, bnc#899363 - ignore /etc/install.inf:usessh flag when the file is present in installed system and always reload / restart network service in case of updated configuration - 3.1.109 ------------------------------------------------------------------- Thu Oct 10 17:10:42 CEST 2014 - schubi@suse.de - AutoYaST Routing Import: Initialize device list correctly. (bnc#900352) - 3.1.108 ------------------------------------------------------------------- Fri Oct 10 15:20:36 CEST 2014 - locilka@suse.com - Do not set default_route to "no" in auto-configuration in inst-sys, just remove the entry completely (bnc#900466) - 3.1.107 ------------------------------------------------------------------- Thu Oct 9 15:47:14 UTC 2014 - ancor@suse.com - Improved help text in "global options" (bnc#892678) - 3.1.106 ------------------------------------------------------------------- Mon Oct 6 09:31:41 UTC 2014 - mfilka@suse.com - bnc#889287 - during autoconfiguration at s390 use linuxrc's OSAHWAddr param for LLADDR when available. - 3.1.105 ------------------------------------------------------------------- Tue Sep 30 10:15:38 UTC 2014 - ancor@suse.com - The "change hostname via DHCP" setting is now configurable via control file (bnc#870896). - 3.1.104 ------------------------------------------------------------------- Mon Sep 29 22:14:49 UTC 2014 - mfilka@suse.com - bnc#898620 - do not write LLADDR="00:00:00:00:00:00" into ifcfg in z/VM - 3.1.103 ------------------------------------------------------------------- Thu Sep 25 15:51:37 UTC 2014 - mfilka@suse.com - bnc#897394, bnc#866250 - device specific routes configuration (ifroute-) is supported - 3.1.102 ------------------------------------------------------------------- Tue Sep 23 15:03:15 UTC 2014 - mfilka@suse.com - bnc#892958 - propose STARTMODE=nfsroot when installing to remote device - 3.1.101 ------------------------------------------------------------------- Wed Sep 17 16:35:12 CEST 2014 - mvidner@suse.com - Really do not lose the default route when editing an interface (bnc#883836#c15). - 3.1.100 ------------------------------------------------------------------- Wed Sep 17 15:26:59 CEST 2014 - locilka@suse.com - Do not check for / install packages in inst-sys (bnc#888130) - 3.1.99 ------------------------------------------------------------------- Tue Sep 16 15:22:29 CEST 2014 - locilka@suse.com - Remote administration adjusted to warn users that they need to restart display manager manually if it's needed (bnc#893606) - 3.1.98 ------------------------------------------------------------------- Fri Sep 12 11:44:46 UTC 2014 - mfilka@suse.com - bnc#894089 - update udev rules correctly when changing device names for more than one net device - 3.1.97 ------------------------------------------------------------------- Fri Sep 12 09:03:27 UTC 2014 - ancor@suse.com - Changed the remote administration module to get the list of required packages from yast2-packager (bnc#896178). - 3.1.96 ------------------------------------------------------------------- Mon Sep 8 08:55:09 UTC 2014 - mvidner@suse.com - Use a more flexible rubygem requirement syntax (bnc#895069) - 3.1.95 ------------------------------------------------------------------- Fri Sep 5 09:48:22 UTC 2014 - mfilka@suse.com - bnc#894053 - it is not possible to rename a device to a name same as an unconfigured device's one - bnc#895273 - when adding new device, whole name is shown instead of only number. - it is possible to fill in a name which conforms to a new device naming scheme - 3.1.94 ------------------------------------------------------------------- Thu Sep 4 11:03:29 CEST 2014 - locilka@suse.com - Fixed firewall proposal to survive missing SuSEfirewall2 services files for openssh or VNC - if files are missing, services are not handled by the proposal (bnc#894419) - 3.1.93 ------------------------------------------------------------------- Wed Sep 3 09:01:40 UTC 2014 - mvidner@suse.com - Test speed-up. - 3.1.92 ------------------------------------------------------------------- Wed Sep 3 08:37:43 UTC 2014 - mfilka@suse.com - bnc#886434 - accelerated autoconfiguration at the beginning of installer - 3.1.91 ------------------------------------------------------------------- Tue Sep 2 08:45:30 UTC 2014 - ancor@suse.com - Updated BuildRequires to break cycle introduced in yast2-installation 3.1.114 (which fixes bnc#893501) - 3.1.90 ------------------------------------------------------------------- Thu Aug 28 11:16:20 UTC 2014 - lslezak@suse.cz - write the proxy credentials from install.inf separately, make it compatible with the proxy module used at installed system (bnc#885957) - 3.1.89 ------------------------------------------------------------------- Wed Aug 27 14:39:13 UTC 2014 - mfilka@suse.com - bnc#893638 - handle abort button correctly during installation - 3.1.88 ------------------------------------------------------------------- Mon Aug 25 10:46:44 UTC 2014 - mfilka@suse.com - bnc#891517 - do not require ifplugd package for devices with STARTMODE='ifplugd' in ifcfg - 3.1.87 ------------------------------------------------------------------- Fri Aug 22 16:43:24 CEST 2014 - locilka@suse.com - Fixed requesting sshd/firewall packages in case of the default configuration together with minimal installation (bnc#893126) - 3.1.86 ------------------------------------------------------------------- Thu Aug 21 14:20:20 CEST 2014 - locilka@suse.com - Fixed firewall proposal in case of VNC installation: using correct firewall services: vnc-httpd and vnc-server (bnc#892899) - 3.1.85 ------------------------------------------------------------------- Mon Aug 18 13:38:21 CEST 2014 - snwint@suse.de - copy wickedd-nanny status (in /etc/wicked/common.xml) to target - 3.1.84 ------------------------------------------------------------------- Fri Aug 15 09:24:04 UTC 2014 - mfilka@suse.com - bnc#887238 - Layer2 availability option is referenced correctly during autoconfiguration - 3.1.83 ------------------------------------------------------------------- Fri Aug 15 08:31:59 UTC 2014 - jsrain@suse.cz - fixed typo in module name (bnc#891921) - 3.1.82 ------------------------------------------------------------------- Thu Aug 14 14:52:14 UTC 2014 - mfilka@suse.com - bnc#841170, fate#316090 - support for filtering broadcoms storage only devices out of device list - 3.1.81 ------------------------------------------------------------------- Wed Aug 13 11:09:05 UTC 2014 - lslezak@suse.cz - properly convert proxy configuration from install.inf during installation (bnc#885957) - 3.1.80 ------------------------------------------------------------------- Wed Aug 13 08:40:28 UTC 2014 - mvidner@suse.com - Fixed network_autoconfiguration_test stubbing on s390 (bnc#883836). - 3.1.79 ------------------------------------------------------------------- Tue Aug 12 16:58:55 CEST 2014 - locilka@suse.com - Reading and adjusting the SuSEfirewall2 configuration has been moved from inst_finish to inst_proposal because AutoYast export can be already requested in inst_proposal (bnc#887406) - 3.1.78 ------------------------------------------------------------------- Thu Aug 7 12:20:44 UTC 2014 - mvidner@suse.com - Do not lose default route when editing an interface (bnc#883836). - 3.1.77 ------------------------------------------------------------------- Tue Aug 5 14:59:19 CEST 2014 - schubi@suse.de - Autoyast: If NetworkManager is not available taking wicked although the user has set it explicit. ( with warning Popup ) (bnc#890238) - 3.1.76 ------------------------------------------------------------------- Mon Aug 4 06:22:20 UTC 2014 - mfilka@suse.com - bnc#889359 - Re-enable Add button in Overview dialog during installation - 3.1.75 ------------------------------------------------------------------- Mon Aug 4 05:36:41 UTC 2014 - mfilka@suse.com - bnc#884517 - fixed proposal when virtual machine proposal is selected - /etc/hosts do not contain incorrect 0.0.0.0 entry - 3.1.74 ------------------------------------------------------------------- Fri Aug 1 14:15:49 UTC 2014 - ancor@suse.com - Avoid confusing firewall proposals by hidding the details (ssh and vnc ports) when the firewall is disabled (bnc#886554). - 3.1.73 ------------------------------------------------------------------- Fri Aug 1 08:21:36 UTC 2014 - ancor@suse.com - Don't propose to enable the firewall if SuSEFirewall is not selected for installation (bnc#881250) - 3.1.72 ------------------------------------------------------------------- Tue Jul 22 14:30:00 CEST 2014 - locilka@suse.com - Using new ServicesProposal library to set the sshd service status for AutoYast export at the end of installation (bnc#887688) - 3.1.71 ------------------------------------------------------------------- Thu Jul 17 11:07:46 CEST 2014 - snwint@suse.de - Use ProxyURL when reading proxy settings from install.inf. - 3.1.70 ------------------------------------------------------------------- Mon Jul 14 10:32:34 CEST 2014 - schubi@suse.de - Do not restart network if the installation has been started via a SSH connection. (bnc#885640) - 3.1.69 ------------------------------------------------------------------- Fri Jul 11 08:52:08 UTC 2014 - mfilka@suse.com - bnc#885257 - rephrased message informing on active NetworkManager - 3.1.68 ------------------------------------------------------------------- Tue Jun 24 10:00:47 CEST 2014 - schubi@suse.de - bnc#883718 Taking wicked as default in autoyast installation. - 3.1.67 ------------------------------------------------------------------- Sat Jun 21 19:17:43 UTC 2014 - mfilka@suse.com - bnc#878719 - active network service selected properly - 3.1.66 ------------------------------------------------------------------- Thu Jun 19 11:53:55 UTC 2014 - mfilka@suse.com - bnc#879617 - fixed generated bridge port configuration - tun device is not allowed as bridge port anymore - 3.1.65 ------------------------------------------------------------------- Sat Jun 14 20:20:57 UTC 2014 - mfilka@suse.com - bnc#880167 - fixed internal error when renaming device - bnc#877690 - turned more labels into title style. - 3.1.64 ------------------------------------------------------------------- Wed Jun 11 10:06:12 UTC 2014 - mfilka@suse.com - bnc#878719 - handle inactive network service state - allow disabling network service completely - fixed disabling of unconfigureable items when e.g. NetworkManager is used as network service - 3.1.63 ------------------------------------------------------------------- Tue Jun 3 20:37:11 UTC 2014 - mfilka@suse.com - bnc#858908 - write hostname into cross platform /etc/hostname instead of SUSE specific /etc/HOSTNAME - 3.1.62 ------------------------------------------------------------------- Fri May 30 14:41:29 UTC 2014 - mfilka@suse.com - bnc#880754 - fixed internal error when configuring TUN/TAP device - 3.1.61 ------------------------------------------------------------------- Fri May 30 13:50:20 UTC 2014 - vmoravec@suse.com - Fix failing tests due to changes in SystemdService#restart - 3.1.60 ------------------------------------------------------------------- Mon May 26 09:45:24 UTC 2014 - mfilka@suse.com - bnc#868256 - network service selection turned into combo box - showing only those services that are actually available - 3.1.59 ------------------------------------------------------------------- Fri May 23 16:51:27 CEST 2014 - locilka@suse.com - Fixed service name for remote administration (display-manager) including code Rubyfication (bnc#878910) - 3.1.58 ------------------------------------------------------------------- Fri May 16 13:59:51 UTC 2014 - mfilka@suse.com - bnc#877690 - use title style for labels - 3.1.57 ------------------------------------------------------------------- Fri May 16 11:11:53 UTC 2014 - mfilka@suse.com - bnc#876848 - network autoconfiguration fixed for kvm guests - 3.1.56 ------------------------------------------------------------------- Tue May 6 12:53:02 UTC 2014 - mfilka@suse.com - bnc#874178 - fixed help for "Global Options" - 3.1.55 ------------------------------------------------------------------- Tue May 6 10:26:57 UTC 2014 - mfilka@suse.com - bnc872381 - installer sets target's hostname and hosts properly - 3.1.54 ------------------------------------------------------------------- Mon May 5 22:31:45 UTC 2014 - mfilka@suse.com - fixed testsuite - adapted to API changes - 3.1.53 ------------------------------------------------------------------- Mon May 5 08:50:48 UTC 2014 - mfilka@suse.com - bnc#870896 - fixed proposed DNS / Hostname configuration to be same as in SLE-11 - 3.1.52 ------------------------------------------------------------------- Mon Apr 28 11:06:47 UTC 2014 - mfilka@suse.com - bnc#867451 - when virtual machine is installed, propose virtual interface configuration - 3.1.51 ------------------------------------------------------------------- Fri Apr 25 07:15:25 UTC 2014 - mfilka@suse.com - bnc#872319 - accelerated dhcp automatic configuration which is done during initial phase of installer - 3.1.50 ------------------------------------------------------------------- Thu Apr 17 11:44:20 UTC 2014 - mfilka@suse.com - fixed terminology confusion. "Alias name" turned into "IPv4 Address Label". "Alias name" is obsolete since kernel 2.0.0 - 3.1.49 ------------------------------------------------------------------- Thu Apr 17 08:18:58 UTC 2014 - mfilka@suse.com - bnc#870406 - fixed assigning device name in ifcfg created during installation - 3.1.48 ------------------------------------------------------------------- Mon Apr 14 16:46:02 UTC 2014 - mfilka@suse.com - bnc#873149 - manual network configuration dialog changed to Next / Back dialog - 3.1.47 ------------------------------------------------------------------- Fri Apr 4 13:12:27 UTC 2014 - mfilka@suse.com - bnc#868187 - implemented heuristics for setting DHCLIENT_SET_DEFAULT_ROUTE during autoconfiguration in installation - 3.1.46 ------------------------------------------------------------------- Fri Apr 4 12:41:36 UTC 2014 - jreidinger@suse.com - avoid client redefinition warning (bnc#872089) - 3.1.45 ------------------------------------------------------------------- Wed Apr 2 13:22:18 UTC 2014 - mfilka@suse.com - bnc#869199 - fix resolv.conf not getting updated (via NETCONFIG_DNS_POLICY being emptied) - 3.1.44 ------------------------------------------------------------------- Wed Apr 2 11:18:53 UTC 2014 - jreidinger@suse.com - fix typos in latest change ( found by openqa ) - 3.1.43 ------------------------------------------------------------------- Wed Apr 2 09:22:07 UTC 2014 - jreidinger@suse.com - split enabling sshd and opening firewall port in installation (bnc#865056) - 3.1.42 ------------------------------------------------------------------- Mon Mar 31 08:53:01 CEST 2014 - locilka@suse.com - Fixed calling logging function in inst_lan (bnc#871091) - 3.1.41 ------------------------------------------------------------------- Fri Mar 28 12:12:58 UTC 2014 - mfilka@suse.com - bnc#870622 - opening network configuration dialogue on user's request works - 3.1.40 ------------------------------------------------------------------- Thu Mar 27 08:11:59 UTC 2014 - mfilka@suse.com - bnc#869776 - fixed internal error raised when building interface overview - 3.1.39 ------------------------------------------------------------------- Mon Mar 24 23:18:43 UTC 2014 - mfilka@suse.com - bnc#869353 - inst_lan can walk back in installer - 3.1.38 ------------------------------------------------------------------- Fri Mar 21 15:24:19 UTC 2014 - mfilka@suse.com - bnc#869224 - enlarged nic name input field in "Edit Nic Name" dialogue in ncurses mode - 3.1.37 ------------------------------------------------------------------- Wed Mar 19 09:53:20 UTC 2014 - mfilka@suse.com - bnc#868830 - remove device also from LanItems' cache when deleting during automatic configuration in installer - 3.1.36 ------------------------------------------------------------------- Mon Mar 17 10:54:05 UTC 2014 - mfilka@suse.com - gh#yast/yast-core#74 - automatic dhcp configuration is unable to clear unused configurations. It blocks starting manual configuration dialog. - 3.1.35 ------------------------------------------------------------------- Sat Mar 15 22:54:30 UTC 2014 - mfilka@suse.com - bnc#868436 - fixed internal error at the begining of installation - 3.1.34 ------------------------------------------------------------------- Wed Mar 12 08:01:43 UTC 2014 - mfilka@suse.com - bnc#866827, fate#314695 - show a dialog for network configuration when autoconfiguration is unable to proceed - 3.1.33 ------------------------------------------------------------------- Mon Mar 10 10:54:18 CET 2014 - locilka@suse.com - Fixed Yast Remote to allow enabling vnc-httpd and vnc-server services in firewall (bnc#867377). - 3.1.32 ------------------------------------------------------------------- Wed Mar 5 10:11:41 UTC 2014 - mvidner@suse.com - bnc#865707 - use wicked as dhcp client in instsys (by mfilka) - reverted wickedd-dhcp{6,4}, instead try wicked ifreload and delete the config if that didn't work - 3.1.31 ------------------------------------------------------------------- Tue Mar 4 16:24:22 UTC 2014 - mvidner@suse.com - Use wickedd-dhcp{6,4} instead of (dropped) dhcpcd-test when setting up DHCP interfaces (bnc#866617) - 3.1.30 ------------------------------------------------------------------- Fri Feb 28 15:30:41 UTC 2014 - jreidinger@suse.com - fix installation crash - do not mess ruby global namespace - 3.1.29 ------------------------------------------------------------------- Fri Feb 28 11:21:19 UTC 2014 - mfilka@suse.com - bnc#864614 - exclude already configured devices from dhcp candidates when attempting to do an autoconfiguration at the begining of installation - 3.1.28 ------------------------------------------------------------------- Fri Feb 28 08:25:53 UTC 2014 - mfilka@suse.com - bnc#866224 - inst_install_inf.rb is present in instsys - 3.1.27 ------------------------------------------------------------------- Thu Feb 27 10:44:09 UTC 2014 - mfilka@suse.com - bnc#865199 - netmask generated corectly when handling static net configuration provided by install.inf - 3.1.26 ------------------------------------------------------------------- Wed Feb 26 23:00:17 UTC 2014 - mfilka@suse.com - fixed internal error in save_network client - 3.1.25 ------------------------------------------------------------------- Wed Feb 26 13:19:08 UTC 2014 - mfilka@suse.com - bnc#859213 - generate install.inf based netconfig at the begining of installation. Generated configuration is copied to target at the end of installation - 3.1.24 ------------------------------------------------------------------- Wed Feb 19 16:30:43 CET 2014 - snwint@suse.de - copy also ifroute-* files into installed system - 3.1.23 ------------------------------------------------------------------- Wed Feb 19 15:01:48 UTC 2014 - snwint@suse.com - fix merging /etc/sysconfig/network/config, values with spaces broke the syntax and made wicked crash (bnc#864510) - 3.1.22 ------------------------------------------------------------------- Mon Feb 17 08:01:21 UTC 2014 - mfilka@suse.com - bnc#862378 - improved earlier fix. It handles virtual devices without configuration better now. - 3.1.21 ------------------------------------------------------------------- Fri Feb 14 09:56:48 UTC 2014 - mfilka@suse.com - bnc#863952 - removed remaining references to DSL, ISDN, Modem modules from network launcher - 3.1.20 ------------------------------------------------------------------- Tue Feb 11 13:22:26 UTC 2014 - mfilka@suse.com - bnc#862378 - Device name set according hwinfo when ifcfg["NAME"] is empty - 3.1.19 ------------------------------------------------------------------- Fri Feb 7 20:48:18 UTC 2014 - mfilka@suse.com - fate#315501 - IPoIB mode configuration in YaST - 3.1.18 ------------------------------------------------------------------- Tue Feb 4 12:49:29 UTC 2014 - mfilka@suse.com - bnc#859903 - tightvnc package is not required when enabling remote administration - 3.1.17 ------------------------------------------------------------------- Thu Jan 30 09:55:29 UTC 2014 - mfilka@suse.com - bnc#861078 - network configuration created during installation is copied to target - 3.1.16 ------------------------------------------------------------------- Tue Jan 21 10:30:13 UTC 2014 - mfilka@suse.com - bnc#859181 - dropped code related to smpppd (ifcfg: USERCONTROL) - 3.1.15 ------------------------------------------------------------------- Wed Jan 15 07:49:36 UTC 2014 - mfilka@suse.com - bnc#846950 - change in resolv conf policy detected and stored properly - 3.1.14 ------------------------------------------------------------------- Thu Jan 9 11:11:08 UTC 2014 - mfilka@suse.com - Don't show the Add button for network devices during the installation: configuring undetected ones is considered an advanced operation that should be postponed to the installed system. - 3.1.13 ------------------------------------------------------------------- Fri Dec 13 11:03:05 UTC 2013 - mfilka@suse.com - wicked support - initial implementation - adapted to API changes in yast2 3.0.9 - 3.1.12 ------------------------------------------------------------------- Mon Dec 9 09:51:17 UTC 2013 - mfilka@suse.com - fate#308681 - dropped ISDN configuration support - fate#308680 - dropped DSL configuration support - fate#313104 - dropped modem configuration support - dropped parts were moved into newly created package yast2-dialup which is available at github - 3.1.11 ------------------------------------------------------------------- Fri Nov 29 13:38:11 UTC 2013 - jreidinger@suse.com - fix DHCP capable cards client to not break installation - 3.1.10 ------------------------------------------------------------------- Thu Nov 28 15:07:16 UTC 2013 - jreidinger@suse.com - fix distribution of client for detection DHCP capable cards - 3.1.9 ------------------------------------------------------------------- Mon Nov 25 13:29:43 UTC 2013 - jreidinger@suse.com - add installation client that detect all DHCP capable network cards and set it up - 3.1.8 ------------------------------------------------------------------- Wed Nov 20 08:50:16 UTC 2013 - lslezak@suse.cz - removed automatic 2nd stage support (the 2nd stage has been dropped completely) (FATE#314695) - 3.1.7 ------------------------------------------------------------------- Mon Nov 18 10:26:50 UTC 2013 - jreidinger@suse.com - Fix testsuite to the latest changes in NetworkInterfaces - 3.1.6 ------------------------------------------------------------------- Thu Nov 7 20:53:56 UTC 2013 - mfilka@suse.com - bnc#843646 - firewall can be enabled/disabled during installation - 3.1.5 ------------------------------------------------------------------- Wed Oct 30 21:43:14 UTC 2013 - mfilka@suse.com - bnc#847783 - do not offer ifplugd devices as bridge port candidate - 3.1.4 ------------------------------------------------------------------- Tue Oct 22 12:28:17 UTC 2013 - mfilka@suse.com - adapt to removal of NetworkInterfaces.HasAliases from yast2 since 3.1.2 - 3.1.3 ------------------------------------------------------------------- Wed Oct 16 07:09:13 UTC 2013 - mfilka@suse.com - bnc#845534 - fixed internal error which appeared when attempting to add an alias - 3.1.2 ------------------------------------------------------------------- Wed Sep 25 07:00:21 UTC 2013 - mfilka@suse.com - bnc#572202 - separated IP forwarding enablement for IPv4 and IPv6 because IPv6 forwarding disables IPv6 stateless address autoconfiguration (SLAAC) - 3.1.1 ------------------------------------------------------------------- Thu Sep 19 11:23:14 UTC 2013 - lslezak@suse.cz - do not use *.spec.in template, use *.spec file with RPM macros instead - 3.1.0 ------------------------------------------------------------------- Wed Sep 18 09:12:23 UTC 2013 - mfilka@suse.com - Refactoring - removing ycp artifacts - separated dialog for editing nic name into own class - 3.0.7 ------------------------------------------------------------------- Wed Sep 11 09:34:47 UTC 2013 - mfilka@suse.com - bnc#578787 - LanItems provides API for querying all available netcard devices - 3.0.6 ------------------------------------------------------------------- Wed Sep 4 08:59:44 UTC 2013 - mfilka@suse.com - bnc#837793 - Network Card details / General: show the assigned firewall zone; previously "Automatically Assigned Zone" would be always shown. - 3.0.5 ------------------------------------------------------------------- Tue Aug 27 08:20:41 UTC 2013 - jreidinger@suse.com - do not overwrite curl log for addon (BNC#632917) - 3.0.4 ------------------------------------------------------------------- Mon Aug 26 16:00:38 UTC 2013 - jreidinger@suse.com - fix suggest for KDE network manager applet (BNC#747808) - 3.0.3 ------------------------------------------------------------------- Thu Aug 22 12:26:42 UTC 2013 - mfilka@suse.com - Ported changes from SLE branch (bnc#831833) - bnc#769081 - do not remove line from /etc/hosts if it contains two spaces between hostnames - bnc#810539 - fixed issue in YaPI which caused a syntax warning - fate#308978 - do not write network config files if not changed - 3.0.2 ------------------------------------------------------------------- Wed Aug 21 07:32:22 UTC 2013 - mfilka@suse.com - bnc#803616 - do not disable firewall proposal in second stage - 3.0.1 ------------------------------------------------------------------- Wed Jul 31 08:33:47 UTC 2013 - yast-devel@opensuse.org - converted from YCP to Ruby by YCP Killer (https://github.com/yast/ycp-killer) - version 3.0.0 ------------------------------------------------------------------- Mon Jul 29 18:08:19 CEST 2013 - locilka@suse.com - Fixed detection whether interface is handled by firewall and thus fixed accidental stopping and disabling the firewall services. Added detection of interfaces handled by implicit assignment with 'any' in firewall zone. (bnc#829556) - 2.25.8 ------------------------------------------------------------------- Thu Jul 18 11:54:43 UTC 2013 - mfilka@suse.com - bnc#695262 - fixed write sequence to enable device renaming. -2.25.7 ------------------------------------------------------------------- Tue Jul 16 10:32:22 UTC 2013 - mfilka@suse.com - adopted to new device type detection API provided by yast2 - minor improvement in Modem module - no country is selected when a custom provider is selected - 2.25.6 ------------------------------------------------------------------- Tue Jul 16 07:59:47 UTC 2013 - lslezak@suse.cz - move an include statement to the top level (needed for Ruby translation) ------------------------------------------------------------------- Thu Jun 20 06:49:08 UTC 2013 - mfilka@suse.com - bnc#808490 - set securitytypes=none for Xvnc when remote administration is allowed. Required due to different default value in currently used Xvnc implementation (TigerVNC). - Remote Administration module opens ports in firewall when requested by user - 2.25.5 ------------------------------------------------------------------- Wed May 29 10:19:10 UTC 2013 - mfilka@suse.com - bnc#821427 - fixed biosdevname renaming in case of buggy SMBIOS. - original patch provided by Martin Wilck (martin.wilck@ts.fujitsu.com) - 2.25.4 ------------------------------------------------------------------- Mon May 27 06:21:40 UTC 2013 - mfilka@suse.com - bnc#813232 - extended fix from 2.25.2. DNS module is able to handle FQDN now. - 2.25.3 ------------------------------------------------------------------- Thu May 16 06:51:35 UTC 2013 - mfilka@suse.com - bnc#817943 - do not propose bridge devices when a virtualization is installed on s390 - 2.25.2 ------------------------------------------------------------------- Thu May 2 12:21:37 UTC 2013 - mfilka@suse.com - bnc#813232 - fixed parsing hostname in DNS module. Number from begining is not stripped anymore. - 2.25.1 ------------------------------------------------------------------- Tue Apr 30 08:37:34 UTC 2013 - mfilka@suse.com - bnc#793367 - Added loading tun/tap settings from netconfig. - 2.25.0 ------------------------------------------------------------------- Fri Apr 19 07:30:38 UTC 2013 - mfilka@suse.com - Fix detection of properly configured LCS and CTC devices (bnc#741071#c20) - Only save LLADDR (persistent MAC) for some s390 card types, avoiding softsetup, also after the installation (bnc#728611). - Ensure persistent interface names by retriggering udev events after we have written an incomplete 70-persistent-net.rules (bnc#721520). ------------------------------------------------------------------- Fri Apr 12 10:49:56 UTC 2013 - mfilka@suse.com - Changed way how list of slave candidates for bridge is created - Improved conditions for slave candidates list creation. Devices enslaved in a bond are excluded. ------------------------------------------------------------------- Wed Apr 10 09:13:30 UTC 2013 - mfilka@suse.com - bnc#813835 - Crash when attempting to edit unconfigured interface. ------------------------------------------------------------------- Tue Apr 2 07:06:49 UTC 2013 - mfilka@suse.com - bnc#719881 - S390: only L2 capable devices can be enslaved into bond. ------------------------------------------------------------------- Fri Mar 22 11:37:29 UTC 2013 - mfilka@suse.com - bnc#747844 - Extended bugfix. Initializes reasonable defaults for s390 specific variables when configuring device for the first time. Previous fix handled switching between interfaces only. - bnc#792985 - eth not set up during installation - previous bugfix was not working ------------------------------------------------------------------- Fri Mar 22 10:08:35 UTC 2013 - mfilka@suse.com - Ported several fixes in YaPI: - fate#313309 - support for bonding and bridging (WebYaST) - bnc#790219 - fixed writting ifcfg for bonding through YaPI. More than two interfaces can be added into bond device. - YaPI: drop caches when reading network interfaces, make it stateless (bnc#790219#c33) - lslezak@suse.cz - bnc#790202 - workaround for forcing reconfiguration of bridge slaves - 2.24.17 ------------------------------------------------------------------- Tue Mar 5 16:05:05 CET 2013 - mvidner@suse.cz - Adopted to restart / reload using NetworkService instead Service, that has been changed to use network.service alias link installed by NetworkManager.service while "systemctl enable" and obsoletes the NETWORKMANAGER=yes/no variable in /etc/sysconfig/network/config (bnc#764055,bnc#764336,bnc#798348, by mt@suse.com) - Requires sysconfig >= 0.80.0 and yast2 >= 2.23.20 - 2.24.16 ------------------------------------------------------------------- Wed Feb 27 22:42:42 UTC 2013 - mfilka@suse.com - fate#313548, fate#309055 and fate#100011 in general. Removed SUSEconfig calls for postfix and sendmail. Also related to bnc#786665 - 2.24.15 ------------------------------------------------------------------- Tue Feb 12 14:00:05 CET 2013 - mvidner@suse.cz - AutoYaST: write /etc/hosts even if keep_install_network=true (bnc#796580) - AutoYaST: If keep_install_network=true and dns/write_hostname is unspecified, use the product default (which is false on SLES), thus not writing 127.0.0.2 to /etc/hosts. (bnc#796580) (fixing a regression introduced in 2.22.1) - 2.24.14 ------------------------------------------------------------------- Mon Jan 21 20:09:15 UTC 2013 - mfilka@suse.com - fate#312733 - nameservers editing supported via CLI - 2.24.13 ------------------------------------------------------------------- Thu Jan 17 16:12:32 CET 2013 - locilka@suse.com - Added support for VNC in network/firewall configuration in first stage of installation (bnc#795929) - 2.24.12 ------------------------------------------------------------------- Thu Jan 10 10:28:04 UTC 2013 - mfilka@suse.com - s390 - bnc#719881 - only devices with L2 support can be enslaved in bond - improved filtering of devices available for enslaving. - able to load qeth config from system (layer2 support and other qeth attributes used to be lost once qeth device was configured) - 2.24.11 ------------------------------------------------------------------- Mon Jan 7 08:47:01 UTC 2013 - mfilka@suse.com - fate#312733 - Added edit action for DNS CLI mode. - Hostname editing supported. - 2.24.10 ------------------------------------------------------------------- Thu Jan 3 12:31:30 UTC 2013 - locilka@suse.com - Testsuites adapted to switching Service module to systemd (yast2-2.23.15) - Testsuite adapted to merging SuSEfirewall2_* scripts into one (yast2-2.23.17) - 2.24.9 ------------------------------------------------------------------- Thu Nov 15 11:48:12 UTC 2012 - mfilka@suse.com - confirmed license ------------------------------------------------------------------- Tue Nov 13 08:51:51 UTC 2012 - mfilka@suse.com - Code cleanup: - removed obsolete and empty function ScreenName. - removed reference to CVS/SVN feature ($Id$) ------------------------------------------------------------------- Tue Nov 6 10:44:59 UTC 2012 - mfilka@suse.com - Fixed testsuite. tests/include.ycp, tests/udev.ycp failed when missing /etc/sysconfig/console. ------------------------------------------------------------------- Thu Oct 25 21:04:58 UTC 2012 - mfilka@suse.com - initialize s390 specific device variables when switching interfaces - s390 code cleanup. chan_mode variable is not shared between different device types anymore. qeth_macaddress is set according sysconfig now. - bnc#747844 - 2.24.8 ------------------------------------------------------------------- Wed Oct 17 12:42:29 UTC 2012 - mfilka@suse.com - Refactoring editing interface names. - Added nic name checking according bnc#784952 - 2.24.7 ------------------------------------------------------------------- Wed Oct 3 09:07:01 UTC 2012 - mfilka@suse.com - Autoenabling of all interfaces allowed during installation only. - fixes bnc#782283 - 2.24.6 ------------------------------------------------------------------- Fri Sep 21 11:26:22 CEST 2012 - jsuchome@suse.cz - let curl follow redirects when downloading release notes package (bnc#781330) - 2.24.5 ------------------------------------------------------------------- Mon Aug 27 14:08:26 UTC 2012 - mfilka@suse.com - bnc#752464 - leak wireless passwords - 2.24.4 ------------------------------------------------------------------- Mon Aug 20 10:53:33 UTC 2012 - mfilka@suse.com - bnc#754940 - missing help in hw dialog when adding new device. - code cleanup - 2.24.3 ------------------------------------------------------------------- Mon Jul 30 12:44:37 UTC 2012 - mfilka@suse.com - bnc#766217 - Gateway IP address is invalid added default '-' for Genmask and gateway fields - 2.24.2 ------------------------------------------------------------------- Wed Jul 25 08:09:48 UTC 2012 - mkubecek@suse.cz - use "ip addr" and "ip route" for network test logs rather than ifconfig and route ------------------------------------------------------------------- Mon Jul 16 09:01:25 UTC 2012 - mfilka@suse.com - bnc#767946 - configuring dummy netwok interface error disable '-o' option for dummy module hwcfg widget doesn't exist - 2.24.1 ------------------------------------------------------------------- Mon Jul 2 09:23:14 UTC 2012 - mfilka@suse.com - fate#312287 - hotpluging of bonding slaves - updated UI - added columns into net device overview - updated testsuite - 2.24.0 ------------------------------------------------------------------- Wed May 2 07:19:02 UTC 2012 - mfilka@suse.com - bnc#750325 - allow apostrophe in ESSID - 2.23.0 ------------------------------------------------------------------- Tue Apr 24 13:35:28 CEST 2012 - ug@suse.de - keep_install_network added to rnc file (bnc#758529) ------------------------------------------------------------------- Wed Apr 11 11:13:51 CEST 2012 - mvidner@suse.cz - Fixed a dead reference to proxy code; moved a forgotten file. - 2.22.7 ------------------------------------------------------------------- Tue Apr 10 14:45:17 CEST 2012 - mvidner@suse.cz - Moved proxy client config to a new package yast2-proxy.rpm - 2.22.6 ------------------------------------------------------------------- Thu Mar 29 15:26:35 CEST 2012 - jsuchome@suse.cz - merged proofread texts ------------------------------------------------------------------- Wed Mar 14 12:00:35 CET 2012 - mvidner@suse.cz - No need to chmod /etc/sysconfig/network/providers after placing files there (which opens up a race): filesystem.rpm and permissions.rpm have the correct permissions for it already (bnc#713661) ------------------------------------------------------------------- Wed Mar 7 11:10:31 CET 2012 - mvidner@suse.cz - Sleep between writing udev rules and ifcfgs so that rcnetwork reload works (bnc#749365) - 2.22.5 ------------------------------------------------------------------- Wed Feb 29 11:39:49 CET 2012 - jsuchome@suse.cz - internet test: "Abort > Continue Installation" should not abort (bnc#748251) ------------------------------------------------------------------- Mon Feb 27 09:38:49 UTC 2012 - mfilka@suse.com - installer's proxy config stored on installed system - bnc#693640 - 2.22.4 ------------------------------------------------------------------- Thu Feb 23 08:52:06 UTC 2012 - mfilka@suse.com - added popup with security question when proxy url contains password (http://usr:pass@proxy) - bnc 694582 - fixed testsuite - 2.22.3 ------------------------------------------------------------------- Tue Jan 31 17:36:27 CET 2012 - mvidner@suse.cz - Simplified NetworkStorage::isDiskOnNetwork, thx locilka (bnc#726057#c12) ------------------------------------------------------------------- Tue Jan 24 16:28:37 CET 2012 - mvidner@suse.cz - Fixed broken autoyast in general (bnc#742855) and in case with keep_install_network without dns without routing (bnc#712864). - Filter out more Chelsio devices, by PCI id (bnc#711432#c83) - 2.22.2 ------------------------------------------------------------------- Thu Jan 12 15:52:47 CET 2012 - mvidner@suse.cz - AY keep_install_network: merge dns and routing from linuxrc item by item, not just in bulk (bnc#712864). - Clarified the label for BOOTPROTO=none: "No Link and IP Setup ( Bonding Slaves)" (bnc#737333). - 2.22.1 ------------------------------------------------------------------- Fri Jan 6 16:17:00 CET 2012 - mvidner@suse.cz - skip USB NICs during bridge proposal (bnc#710098) - do not inherit for new bridge port devices PREFIXLEN (bnc#735109) - do not inherit for bridge device ETHTOOLS_OPTIONS (bnc#735109) - Filter out Chelsio devices without device file (bnc#711432) - Only save LLADDR (persistent MAC) for some s390 card types (bnc#658708). - 2.22.0 ------------------------------------------------------------------- Fri Jan 6 14:47:16 CET 2012 - mvidner@suse.cz - Moved NetworkStorage from yast2.rpm to yast2-network.rpm (bnc#726057) - Use Storage::IsDeviceOnNetwork instead of trying to do it ourselves, wrong (bnc#726057). ------------------------------------------------------------------- Thu Sep 22 11:24:51 CEST 2011 - visnov@suse.cz - show module name in window title - 2.21.8 ------------------------------------------------------------------- Thu Sep 22 09:04:17 UTC 2011 - lslezak@suse.cz - updated Network_YaPI test (adapted to systemd and sysctl changes) - 2.21.7 ------------------------------------------------------------------- Wed Sep 21 14:15:44 UTC 2011 - lslezak@suse.cz - Routing.ycp - use /etc/sysctl.conf file instead of deprecated /etc/sysconfig/sysctl, adapted testsuite ------------------------------------------------------------------- Mon Sep 19 09:20:00 CEST 2011 - visnov@suse.cz - Remove unneeded dialog and dependency on Wizard_hw - 2.21.6 ------------------------------------------------------------------- Fri Sep 2 16:08:07 CEST 2011 - mvidner@suse.cz - Don't switch bonding interfaces to DHCP when editing them (bnc#711962). - Don't say that a NIC without an address has no encryption (bnc#711962). ------------------------------------------------------------------- Wed Aug 31 16:23:38 CEST 2011 - mvidner@suse.cz - More YaPI improvements from Justus Winter: - Write: default BOOTPROTO to 'static', allow omitting IPADDR - Allow manipulating STARTMODE, don't assume 'auto'. - Handle ETHERDEVICE and VLAN_ID. - 2.21.5 ------------------------------------------------------------------- Wed Aug 17 15:02:50 CEST 2011 - mvidner@suse.cz - Sort of enable arbitrary interface names. Fix skipping the internet test, release notes, registration, with biosdevname (bnc#712232). - 2.21.4 ------------------------------------------------------------------- Fri Aug 12 16:27:39 CEST 2011 - mvidner@suse.cz - Integrated patches from Justus Winter: - Make MTU configurable using YaPI. - YaPI (re)Read: Don't append a slash to ipaddr like '1.2.3.4/8/'. - 2.21.3 ------------------------------------------------------------------- Thu Aug 11 16:33:26 CEST 2011 - mvidner@suse.cz - Omit unnecessary INTERFACETYPE declaration in ifcfg (bnc#711762) This broke the VM-proposed bridge because it copied ifcfg-ethN's INTERFACETYPE=eth (bnc#704999). - 2.21.2 ------------------------------------------------------------------- Fri Aug 5 12:34:09 CEST 2011 - tgoettlicher@suse.de - fixed .desktop file (bnc #681249) ------------------------------------------------------------------- Wed Aug 3 17:09:21 CEST 2011 - mvidner@suse.cz - inst_hostname: do write the randomized /etc/HOSTNAME if left unchanged by user (bnc#695803). - Allow empty domain in autoyast profiles again (bnc#677471). - 2.21.1 ------------------------------------------------------------------- Fri Jul 22 17:49:47 CEST 2011 - mvidner@suse.cz - Support biosdevname=1 NIC naming scheme: don't write mac-based udev rules (FATE#311332). - STARMODE='nfsroot' also for FCoE (FATE#306855). - Show NIC device names for unconfigured NICs (FATE#311335). - Fixed configuring multiple interfaces with the same VLAN (FATE#311380, FATE#309240, bnc#572747, bnc#588588) - Make the hostname resolvable to our static address coming from Linuxrc (bnc#664929). - 2.21.0 ------------------------------------------------------------------- Fri Jul 22 17:49:46 CEST 2011 - jreidinger@suse.cz - Do not enable WIRELESS_POWER by default, some APs are broken (FATE#309255). ------------------------------------------------------------------- Fri Jul 22 15:48:16 CEST 2011 - locilka@suse.cz - Obsoleted X-KDE-SubstituteUID replaced with xdg-su in Exec in desktop files (bnc#540627) ------------------------------------------------------------------- Thu Jul 21 13:44:24 CEST 2011 - locilka@suse.cz - Fixed Firewall and SSH proposal to be still able to adjust SSH independently on the firewall status (bnc#537980). - 2.20.13 ------------------------------------------------------------------- Fri Jul 1 13:42:16 CEST 2011 - mvidner@suse.cz - Proofread texts for translation (by A.Turrini, bnc#703190). ------------------------------------------------------------------- Mon May 30 16:40:55 CEST 2011 - mvidner@suse.cz - WebYaST: also update /etc/hosts, for hostname -f (bnc#694283#c8) - 2.20.12 ------------------------------------------------------------------- Thu May 26 15:44:14 UTC 2011 - coolo@novell.com - Switch is not used, so don't require it (removed from perl 5.13.1) ------------------------------------------------------------------- Wed Apr 13 16:17:19 CEST 2011 - mvidner@suse.cz - AutoYaST: networking/start_immediately was ignored (bnc#655571, bnc#675844) - 2.20.11 ------------------------------------------------------------------- Tue Feb 15 15:19:47 CET 2011 - mvidner@suse.cz - DSL: linux-atm-lib.rpm was renamed to libatm1.rpm (bnc#668586) ------------------------------------------------------------------- Mon Jan 17 14:10:10 UTC 2011 - mvidner@novell.com - fixed progress messages being out of sync when writing LAN config (reported by bmwiedemann) ------------------------------------------------------------------- Thu Dec 23 00:32:23 CET 2010 - mzugec@suse.cz - ifcfg-ethX.Y style config files for VLAN(fate#309240) - 2.20.10 ------------------------------------------------------------------- Mon Dec 20 11:37:02 CET 2010 - mzugec@suse.cz - fate#306855: FCoE boot support - 2.20.9 ------------------------------------------------------------------- Fri Dec 17 10:57:38 CET 2010 - mzugec@suse.cz - L3: don't propose bridge for vbox (bnc#648044) - 2.20.8 ------------------------------------------------------------------- Mon Dec 6 16:13:04 CET 2010 - mzugec@suse.cz - L3: AY Layer2 support - fixed portname option (bnc#573607) - 2.20.7 ------------------------------------------------------------------- Thu Dec 2 10:07:43 CET 2010 - mzugec@suse.cz - removed obsolete 50-ipv6.conf (bnc#632530) - 2.20.6 ------------------------------------------------------------------- Fri Nov 26 14:09:27 CET 2010 - mzugec@suse.cz - added search keywords (bnc#641922) - 2.20.5 ------------------------------------------------------------------- Tue Nov 16 11:13:12 CET 2010 - mzugec@suse.cz - accept unconfigured + BOOTPROTO=none bondslaves (bnc#652987) - 2.20.4 ------------------------------------------------------------------- Mon Nov 15 12:37:29 CET 2010 - mzugec@suse.cz - correctly apply BusID based udev rules in AY (bnc#648270) - 2.20.3 ------------------------------------------------------------------- Mon Nov 8 15:28:20 CET 2010 - mzugec@suse.cz - TP-L3: if possible, for temporary installation network use same device with same MAC address, even if devicename changed (bnc#648270) - 2.20.2 ------------------------------------------------------------------- Wed Nov 3 17:03:37 CET 2010 - mzugec@suse.cz - support for ordering in bonding slaves (bnc#640611) - 2.20.1 ------------------------------------------------------------------- Wed Oct 27 13:53:54 CEST 2010 - mzugec@suse.cz - AY: when no network profile, don't change network configuration (bnc#649494) - 2.19.41 ------------------------------------------------------------------- Tue Oct 26 14:44:47 CEST 2010 - mzugec@suse.cz - added "No IP" option for bridge devices (bnc#648620) - 2.19.40 ------------------------------------------------------------------- Tue Oct 12 01:19:58 CEST 2010 - mzugec@suse.cz - added support for IFPLUGD_PRIORITY (bnc#586376) - 2.19.39 ------------------------------------------------------------------- Fri Sep 17 11:27:05 CEST 2010 - mzugec@suse.cz - AY: added IPv6 option (bnc#633310) - 2.19.38 ------------------------------------------------------------------- Thu Aug 19 14:08:33 CEST 2010 - mzugec@suse.de - warn user about nm-applet/knetworkmanager (bnc#627273) - 2.19.37 ------------------------------------------------------------------- Fri Aug 6 13:47:17 CEST 2010 - mzugec@suse.cz - Proxy: correctly enclose user:password into quotes (bnc#616695) - 2.19.36 ------------------------------------------------------------------- Fri Jul 30 13:37:32 CEST 2010 - mzugec@suse.cz - ISDN: removed deprecated documentation URL (bnc#590742) ------------------------------------------------------------------- Thu Jul 29 10:30:49 CEST 2010 - mzugec@suse.cz - fixed typo (bnc#626280) ------------------------------------------------------------------- Tue Jul 27 16:20:24 CEST 2010 - mzugec@suse.cz - YaPI: allow dhcp + static hostname (bnc#624655) - 2.19.35 ------------------------------------------------------------------- Mon Jul 26 17:43:09 CEST 2010 - mzugec@suse.cz - L3: allow unconfigured devices for VLAN (bnc#625103) - 2.19.34 ------------------------------------------------------------------- Wed Jun 23 09:41:31 CEST 2010 - mzugec@suse.cz - L3: AY Layer2 support (bnc#573607) - 2.19.33 ------------------------------------------------------------------- Tue Jun 22 12:36:47 CEST 2010 - mzugec@suse.cz - updated firmware dependency list (bnc#608979) - 2.19.32 ------------------------------------------------------------------- Thu May 27 13:54:45 CEST 2010 - mzugec@suse.cz - fixed duplicate items issue in UI (bnc#584842) - 2.19.31 ------------------------------------------------------------------- Mon May 24 16:56:46 CEST 2010 - mzugec@suse.cz - make add/edit route popup consistent (bnc#583136) - 2.19.30 ------------------------------------------------------------------- Mon May 17 15:12:05 CEST 2010 - mzugec@suse.cz - updated documentation URL (bnc#590742) - 2.19.29 ------------------------------------------------------------------- Mon May 17 12:17:30 CEST 2010 - mzugec@suse.cz - additional addresses for bridge (bnc#590160) - 2.19.28 ------------------------------------------------------------------- Fri May 14 10:54:52 CEST 2010 - mzugec@suse.cz - improved help text (bnc#580039) - 2.19.27 ------------------------------------------------------------------- Wed May 12 14:29:08 CEST 2010 - mzugec@suse.cz - don't write 79-yast2-drivers.rules if empty (bnc#601723) - 2.19.26 ------------------------------------------------------------------- Wed Apr 21 15:03:21 CEST 2010 - mzugec@suse.cz - filter out some iucv devices (bnc#585363) - 2.19.25 ------------------------------------------------------------------- Mon Apr 19 16:17:49 CEST 2010 - mzugec@suse.cz - hide autoreconnect from UI (bnc#558788) - 2.19.24 ------------------------------------------------------------------- Mon Apr 19 15:26:59 CEST 2010 - mzugec@suse.cz - CLI: respect netmask argument (bnc#584406) - 2.19.23 ------------------------------------------------------------------- Fri Apr 16 13:02:10 UTC 2010 - kmachalkova@novell.com - Rollup patch with several Code11 bugfixes: - Include in cloned data (bnc#576495) - Don't check for presence of static IPs when deciding whether to append 127.0.0.2 line to /etc/hosts - Pre-fill hostname field with global hostname in static IP dialog - Warn if no hostname is specified for static IP (all bnc#583786) - In [auto]installation, prefer hostname from install.inf. Convert to FQDN if it is an IP address (bnc#556613, bnc#502715) ------------------------------------------------------------------- Tue Apr 13 13:18:57 CEST 2010 - mzugec@suse.cz - allow vlan on top of bonding device (bnc#591835) - 2.19.22 ------------------------------------------------------------------- Tue Apr 13 12:41:59 CEST 2010 - mzugec@suse.cz - proxy: "/" character validation (bnc#566350) - 2.19.21 ------------------------------------------------------------------- Tue Mar 30 16:17:10 CEST 2010 - mzugec@suse.cz - added exception to filter out virtio semi-device (bnc#585506) - 2.19.20 ------------------------------------------------------------------- Tue Mar 30 14:02:10 CEST 2010 - mzugec@suse.cz - remove aliases from automatically bridged device (bnc#590167) - 2.19.19 ------------------------------------------------------------------- Wed Mar 24 15:10:33 CET 2010 - mzugec@suse.cz - store hostname from installation proposal dialog (bnc#588938) - 2.19.18 ------------------------------------------------------------------- Tue Mar 23 10:44:20 CET 2010 - mzugec@suse.cz - fixed description for IP/netmask (bnc#588590) - 2.19.17 ------------------------------------------------------------------- Wed Mar 17 09:12:03 CET 2010 - mzugec@suse.cz - L3: in case of type different from config. name write INTERFACETYPE option (bnc#585458) - 2.19.16 ------------------------------------------------------------------- Tue Mar 16 16:18:11 CET 2010 - mzugec@suse.cz - during 1st installation stage write correctly filename for ifcfg file (bnc#588586) - 2.19.15 ------------------------------------------------------------------- Thu Mar 11 10:29:11 CET 2010 - mzugec@suse.cz - L3: update device name via which is system installed by AY (bnc#578760) - 2.19.14 ------------------------------------------------------------------- Tue Mar 2 09:57:05 CET 2010 - mzugec@suse.cz - NetHwDetection: use blacklist (bnc#580729) - 2.19.13 ------------------------------------------------------------------- Tue Mar 2 09:54:54 CET 2010 - mzugec@suse.cz - added fix for saving MAC address to ifcfg (bnc#578689) - 2.19.12 ------------------------------------------------------------------- Mon Feb 22 10:18:24 CET 2010 - mzugec@suse.cz - mark string for translation (bnc#580019) ------------------------------------------------------------------- Tue Feb 9 15:51:34 CET 2010 - mzugec@suse.cz - ipv6: enable/disable both module and sysctl method (bnc#561611) - 2.19.11 ------------------------------------------------------------------- Mon Feb 8 16:23:46 CET 2010 - mzugec@suse.cz - correctly setup iucv devices (bnc#575950) - 2.19.10 ------------------------------------------------------------------- Wed Jan 27 15:21:42 CET 2010 - kmachalkova@suse.cz - Evaluate modified flag of all net components (not only LanItems), so that change in any of them triggers Write (bnc#439235) - Write DNS data along with other network settings in lan_proposal, not separately in inst_hostname (related to bnc#556613) - Renamed "Write hostname to /etc/hosts" and updated related help text (bnc#510228, bnc#469752) - 2.19.9 ------------------------------------------------------------------- Mon Jan 18 09:56:24 CET 2010 - mzugec@suse.cz - fixed remote.desktop file (Categories) - 2.19.8 ------------------------------------------------------------------- Fri Jan 15 10:02:26 CET 2010 - mzugec@suse.cz - allow bridge as ETHERDEVICE for VLAN (bnc#569970) - 2.19.7 ------------------------------------------------------------------- Thu Jan 14 17:59:48 CET 2010 - mzugec@suse.cz - support for BOOTPROTO=ibft option (bnc#551380) - 2.19.6 ------------------------------------------------------------------ Wed Jan 13 18:56:03 CET 2010 - kmachalkova@suse.cz - Adjusted .desktop file(s) to wrap /sbin/yast2/ calls in xdg-su where root privileges are needed, removed X-KDE-SubstituteUID key (bnc#540627) ------------------------------------------------------------------- Wed Dec 16 15:59:25 CET 2009 - mzugec@suse.cz - DNS: warn user to not use .local as domain name (bnc#564317) - 2.19.5 ------------------------------------------------------------------- Mon Dec 7 16:18:51 CET 2009 - kmachalkova@suse.cz - With enabled SuSEFirewall, set SuSEFirewall's FW_ROUTE variable when enabling/disabling IP forwarding in routing settings. This avoids overwriting sysctl variables by SuSEFirewall init scripts (bnc#474304) - Show proxy relogin msg only in Mode::normal (bnc#543469) ------------------------------------------------------------------- Tue Dec 1 11:24:25 CET 2009 - mzugec@suse.de - ISDN: fixed creating configuration with incorrect name (bnc#534504) - 2.19.4 ------------------------------------------------------------------- Fri Nov 27 13:20:10 CET 2009 - mzugec@suse.cz - fixed prefixlen validation - 2.19.3 ------------------------------------------------------------------- Wed Nov 25 15:15:11 CET 2009 - mzugec@suse.cz - disable ipv6 (bnc#558020) - 2.19.2 ------------------------------------------------------------------- Tue Nov 24 13:07:12 CET 2009 - mzugec@suse.cz - support for WIRELESS_AP_SCANMODE option (bnc#551618) - 2.19.1 ------------------------------------------------------------------- Tue Nov 24 10:06:26 CET 2009 - kmachalkova@suse.cz Cumulative patch with SLE11 SP1 bugfixes and features - Introduced option to AY profile to allow overriding product default write_hostname_to_hosts (FaTE#305281) - DNS Import: read product default write_hostname (bnc#500568) and hostname/domain from the system (generate random if needed - bnc#502715) - Read defaults and propose values in inst_hostname only once (bnc#438124) - Do not append 127.0.0.2 line when it is not needed (bnc#469752) - Validate no proxy domains (for FaTE#302377) - 2.19.0 ------------------------------------------------------------------- Mon Nov 23 13:32:59 CET 2009 - mzugec@suse.cz - exclude nfsroot devices from bridged slaves (bnc#557688) - 2.18.63 ------------------------------------------------------------------- Fri Nov 20 13:15:14 CET 2009 - mzugec@suse.de - fixed problem with not matching udev rule (bnc#551310) - 2.18.62 ------------------------------------------------------------------- Thu Nov 19 17:09:19 CET 2009 - mzugec@suse.cz - support for BOOTPROTO=ibft (bnc#547569) - 2.18.61 ------------------------------------------------------------------- Fri Nov 13 17:01:09 CET 2009 - mzugec@suse.de - adapt interfaces into bridge with 0.0.0.0/32 (bnc#547327) - 2.18.60 ------------------------------------------------------------------- Wed Nov 11 20:45:22 CET 2009 - mzugec@suse.cz - install broadcom for b43-pci-bridge driver (bnc#412248) - 2.18.59 ------------------------------------------------------------------- Tue Nov 10 15:50:05 CET 2009 - mzugec@suse.cz - replace kinternet dependency with qinternet (bnc#549912) - 2.18.58 ------------------------------------------------------------------- Mon Nov 9 15:20:50 CET 2009 - mzugec@suse.de - allow VLAN into bridge (bnc#530109) - 2.18.57 ------------------------------------------------------------------- Mon Nov 9 14:53:52 CET 2009 - mzugec@suse.de - allow physical identification only when edit device ------------------------------------------------------------------- Mon Nov 9 14:14:37 CET 2009 - mzugec@suse.cz - adapted test for xen bridged network (bnc#553794) - 2.18.56 ------------------------------------------------------------------- Wed Nov 4 16:17:18 CET 2009 - mzugec@suse.cz - lan module in 1st stage (FaTE#303069) - 2.18.55 ------------------------------------------------------------------- Tue Nov 3 15:32:18 CET 2009 - mzugec@suse.cz - support for ETHTOOL_OPTIONS (FaTE#305352) - 2.18.54 ------------------------------------------------------------------- Thu Oct 29 17:47:14 CET 2009 - mzugec@suse.cz - physical identification for NIC cards (FaTE#307164) - 2.18.53 ------------------------------------------------------------------- Mon Oct 26 16:00:33 CET 2009 - mzugec@suse.cz - show BusID in lan description (FaTE#307165) - 2.18.52 ------------------------------------------------------------------- Tue Oct 20 13:20:12 CEST 2009 - mzugec@suse.cz - missing space in translated text (bnc#545074) ------------------------------------------------------------------- Tue Oct 20 11:28:01 CEST 2009 - mzugec@suse.cz - for wlan require iw instead of wireless-tools (bnc#539669) - 2.18.51 ------------------------------------------------------------------- Thu Oct 1 16:46:02 CEST 2009 - mzugec@suse.cz - YaPI: return map with return code and error message in Write function + testsuite - 2.18.50 ------------------------------------------------------------------- Fri Sep 25 17:50:03 CEST 2009 - kmachalkova@suse.cz - Display simple firewall & SSH config dialog after clicking on 'Firewall' headline in initial proposal (bnc#539289) - 2.18.49 ------------------------------------------------------------------- Thu Sep 24 18:37:03 CEST 2009 - kmachalkova@suse.cz - Propose opening SSH port in firewall in SSH installation (bnc#535206) - Enable SSH service if SSH port in firewall is to be opened (bnc#537980) ------------------------------------------------------------------- Thu Sep 17 13:37:54 CEST 2009 - mzugec@suse.cz - replace STARTMODE='onboot' (which is deprecated) with 'auto' (bnc#533818) - 2.18.48 ------------------------------------------------------------------- Wed Sep 16 14:53:15 CEST 2009 - mzugec@suse.cz - YaPI: write all values (included interfaces) - 2.18.47 ------------------------------------------------------------------- Fri Sep 11 15:31:27 CEST 2009 - mzugec@suse.cz - YaPI: possible to remove default GW (bnc#538397) - 2.18.46 ------------------------------------------------------------------- Wed Sep 9 15:07:34 CEST 2009 - kmachalkova@suse.cz - Fixed packaging (YaPI stuff goes to @moduledir@) ------------------------------------------------------------------- Mon Sep 7 19:11:04 CEST 2009 - kmachalkova@suse.cz - Disable firewall_proposal AC step (or equivalent non-automatic subproposal) if it has been configured in 1st stage already (FaTE #303859 and bnc#534862) - 2.18.45 ------------------------------------------------------------------- Thu Sep 3 20:18:48 CEST 2009 - mzugec@suse.de - YaPI: read interfaces from system (not only fake data) ------------------------------------------------------------------- Mon Aug 31 15:09:48 CEST 2009 - mzugec@suse.de - YaPI: added testsuite ------------------------------------------------------------------- Fri Aug 28 15:52:27 CEST 2009 - mzugec@suse.de - YaPI: real data for dns, routing ------------------------------------------------------------------- Fri Aug 28 15:32:32 CEST 2009 - kmachalkova@suse.cz - Write configuration only in firewall_stage1_finish, do not try to start/stop SuSEFirewall2 service ------------------------------------------------------------------- Thu Aug 27 16:17:40 CEST 2009 - mzugec@suse.de - YaPI: read real data for hostname - 2.18.44 ------------------------------------------------------------------- Tue Aug 25 00:05:45 CEST 2009 - mzugec@suse.de - initial commit for DBus YaPI - 2.18.43 ------------------------------------------------------------------- Wed Aug 19 10:55:06 CEST 2009 - kmachalkova@suse.cz - Do a proper reload of network service on writing (standalone) DNS configuration (removed *-all-dhcp-clients workaround - bnc#528937) ------------------------------------------------------------------- Mon Aug 17 14:55:33 CEST 2009 - mzugec@suse.de - fixed help text (bnc#530345) ------------------------------------------------------------------- Mon Aug 17 14:41:15 CEST 2009 - mzugec@suse.de - removed old help text (bnc#513146) ------------------------------------------------------------------- Mon Aug 17 13:27:50 CEST 2009 - mzugec@suse.de - L3: manually created bridge over bonding (bnc#528074) - 2.18.42 ------------------------------------------------------------------- Mon Aug 17 11:51:35 CEST 2009 - mzugec@suse.de - L3: proposed bridge over bonding (bnc#528076) - 2.18.41 ------------------------------------------------------------------- Fri Aug 14 17:48:25 CEST 2009 - kmachalkova@suse.cz - Simple 'network' configuration in 1st stage of installation (a proposal - turn firewall&ssh on/off) (FaTE #303859) - 2.18.40 ------------------------------------------------------------------- Tue Jul 7 14:46:38 CEST 2009 - kmachalkova@suse.cz - Editing /etc/hosts via host module adjusted to cope with hosts with empty alias (do not replace those with 'nil') (bnc#513033) ------------------------------------------------------------------- Mon Jun 29 11:50:16 CEST 2009 - mzugec@suse.de - linuxrc DHCPTimeout -> sysconfig/network.WAIT_FOR_INTERFACES (bnc#396824) - 2.18.39 ------------------------------------------------------------------- Fri Jun 26 13:24:15 CEST 2009 - mzugec@suse.cz - removed broadcast option from dhcp settings (bnc#513146) - 2.18.38 ------------------------------------------------------------------- Thu Jun 25 15:54:01 CEST 2009 - mzugec@suse.cz - for lcs and ctc offer only 2 CHAN_IDS (bnc#515492) - 2.18.37 ------------------------------------------------------------------- Wed Jun 24 12:40:34 CEST 2009 - mzugec@suse.cz - default option miimon=100 for bonding (bnc#404449) - 2.18.36 ------------------------------------------------------------------- Fri Jun 19 10:56:49 CEST 2009 - mvidner@suse.cz - Using autodocs-ycp.ami, which contains a fix for automake 1.11. ------------------------------------------------------------------- Mon Jun 1 11:59:35 CEST 2009 - mzugec@suse.cz - new variable Internet::test to store status of test (bnc#506721) - 2.18.35 ------------------------------------------------------------------- Mon Jun 1 08:58:25 CEST 2009 - mzugec@suse.cz - fixed buildtest ------------------------------------------------------------------- Thu May 28 16:47:38 CEST 2009 - mzugec@suse.cz - fixed: missing space in lan dialog (bnc#506732) - 2.18.34 ------------------------------------------------------------------- Mon May 18 10:04:57 CEST 2009 - mzugec@suse.cz - fixed: modem configuration syntax error (bnc#497459) - 2.18.33 ------------------------------------------------------------------- Thu May 14 12:41:07 CEST 2009 - mzugec@suse.cz - support for lcs::s390 devices (bnc#363978) - 2.18.32 ------------------------------------------------------------------- Mon May 4 14:48:06 CEST 2009 - mzugec@suse.de - fixed: after autoinstall, dns and routing info are lost (bnc#498993) - 2.18.31 ------------------------------------------------------------------- Tue Apr 28 16:02:37 CEST 2009 - mzugec@suse.de - correctly read/write module options (bnc#487656) - 2.18.30 ------------------------------------------------------------------- Mon Apr 27 10:15:25 CEST 2009 - mzugec@suse.de - improved "device renaming" functionality (bnc#447480) and (bnc#461179) - 2.18.29 ------------------------------------------------------------------- Thu Apr 23 21:46:28 CEST 2009 - mzugec@suse.cz - don't propose bridged network for WLAN devices (bnc#450670) - 2.18.28 ------------------------------------------------------------------- Thu Apr 9 14:05:51 CEST 2009 - mzugec@suse.de - fixed netmask/prefixlen validation and correct write (bnc#493222) - 2.18.27 ------------------------------------------------------------------- Thu Apr 9 10:17:43 CEST 2009 - kmachalkova@suse.cz - Make proxy configuration autoyast-clonable (bnc#492786) ------------------------------------------------------------------- Wed Apr 8 14:00:42 CEST 2009 - mzugec@suse.de - IPv6 default gateway (bnc#458891) - added "route via device" for default gw - 2.18.26 ------------------------------------------------------------------- Mon Apr 6 13:12:39 CEST 2009 - mvidner@suse.cz - Dropped ag_xauth (.xauth.key), superseded since 2005 by $XAUTHLOCALHOSTNAME (bnc#482223). ------------------------------------------------------------------- Thu Apr 2 23:04:11 CEST 2009 - mzugec@suse.de - fixed additional addresses with bonding (bnc#420074) - 2.18.25 ------------------------------------------------------------------- Thu Apr 2 11:46:07 CEST 2009 - kmachalkova@suse.cz - Show "Really abort" pop-up dialog only when data are modified (in proxy - bnc#460172 and hosts - bnc#460156) - Allow '/' character in NO_PROXY (subnet definition - bnc#490661) ------------------------------------------------------------------- Thu Mar 26 15:22:22 CET 2009 - mzugec@suse.cz - show PopupAbort only when data modified (bnc#458324) - 2.18.24 ------------------------------------------------------------------- Thu Mar 26 10:49:19 CET 2009 - mzugec@suse.cz - don't allow to use networkmanager with bridged proposal (bnc#487419) - 2.18.23 ------------------------------------------------------------------- Tue Mar 24 14:41:57 CET 2009 - mzugec@suse.cz - tun/tap device - don't remove default gw (bnc#483233) - 2.18.22 ------------------------------------------------------------------- Tue Mar 24 09:30:03 CET 2009 - mzugec@suse.cz - improved WPA items description (bnc#481509) ------------------------------------------------------------------- Wed Mar 18 13:44:15 CET 2009 - kmachalkova@suse.cz - Do not show the proxy relogin message in installation (both stages) (bnc#486937) ------------------------------------------------------------------- Wed Mar 18 10:42:23 CET 2009 - mzugec@suse.cz - use 50-ipv6.conf instead of modprobe.d/ipv6 file (bnc#485947) - 2.18.21 ------------------------------------------------------------------- Mon Mar 16 14:49:34 CET 2009 - mzugec@suse.cz - fixed firewall checkbox status for dsl and modem (bnc#404359) - 2.18.20 ------------------------------------------------------------------- Thu Mar 12 10:10:46 CET 2009 - mzugec@suse.cz - for s390 propose CHAN_IDS values (bnc#445339) - 2.18.19 ------------------------------------------------------------------- Mon Mar 11 22:48:10 CET 2009 - mzugec@suse.cz - 1st stage - correctly write ifcfg for ipv6 only (bnc#477917) - 2.18.18 ------------------------------------------------------------------- Mon Mar 9 14:58:10 CET 2009 - mzugec@suse.cz - improve address dialog for vlan (bnc#376063) - allow all netcard devices except vlan, bridge and bond to be etherdevice for vlan - 2.18.17 ------------------------------------------------------------------- Thu Mar 5 14:27:19 CET 2009 - mzugec@suse.cz - in DSL module list also pppoe devices (bnc#449982) - 2.18.16 ------------------------------------------------------------------- Thu Mar 5 11:13:06 CET 2009 - mzugec@suse.cz - fixed testsuite for Routing ------------------------------------------------------------------- Tue Mar 3 14:47:18 CET 2009 - mzugec@suse.cz - apply forwarding on both IPv4 and IPv6 (bnc#479370) - 2.18.15 ------------------------------------------------------------------- Tue Mar 3 10:13:05 CET 2009 - mzugec@suse.cz - fixed networking.rnc (bnc#480466) - 2.18.14 ------------------------------------------------------------------- Mon Mar 2 15:41:50 CET 2009 - mzugec@suse.cz - added help text (bnc#471253) ------------------------------------------------------------------- Mon Mar 2 09:20:42 CET 2009 - mzugec@suse.cz - Added omitted handling of `hardware symbol in s390 device workflow (bnc#476490) - store HW address only for L2 qeth devices (bnc #479481) - do not store HW address into sysconfig on hsi and some qeth interfaces (bnc #479481) - 2.18.13 ------------------------------------------------------------------- Tue Feb 24 18:22:06 CET 2009 - mzugec@suse.cz - possible to not use LABEL for aliases (bnc#471253) - 2.18.12 ------------------------------------------------------------------- Mon Feb 23 13:52:21 CET 2009 - mzugec@suse.cz - correctly write modem configuration in case of edit (bnc#465371) - 2.18.11 ------------------------------------------------------------------- Mon Feb 23 12:09:28 CET 2009 - mzugec@suse.cz - restart network when NetworkManager selected (bnc#467939) - 2.18.10 ------------------------------------------------------------------- Fri Feb 20 15:18:32 CET 2009 - mzugec@suse.cz - check size of alias label (bnc#467087) - 2.18.9 ------------------------------------------------------------------- Fri Feb 20 12:26:48 CET 2009 - mzugec@suse.cz - fixed configuration of OSA Layer2 during installation (bnc#476253) - 2.18.8 ------------------------------------------------------------------- Wed Feb 18 18:08:03 CET 2009 - mzugec@suse.cz - fixed dialogs workflow for s390 (bnc#476490) - 2.18.7 ------------------------------------------------------------------- Wed Feb 18 16:52:43 CET 2009 - kmachalkova@suse.cz - Save complete FQDN into /etc/HOSTNAME if specified by 'hostname=' Linuxrc parameter, do not cut off domain name (bnc#476208) ------------------------------------------------------------------- Mon Feb 16 15:54:16 CET 2009 - mzugec@suse.cz - AutoYaST - show Imported settings in UI (bnc#461650) - 2.18.6 ------------------------------------------------------------------- Mon Feb 16 14:17:41 CET 2009 - mzugec@suse.cz - headers for yast lan list (bnc#443753) ------------------------------------------------------------------- Mon Feb 16 13:12:02 CET 2009 - mzugec@suse.cz - warn user when device to delete has STARTMODE=nfsroot (bnc#433867) - 2.18.5 ------------------------------------------------------------------- Fri Feb 13 13:49:19 CET 2009 - mzugec@suse.cz - don't propose wlan during installation (bnc#462631) - 2.18.4 ------------------------------------------------------------------- Wed Feb 11 15:19:27 CET 2009 - mzugec@suse.cz - store qeth options (bnc#474276) - 2.18.3 ------------------------------------------------------------------- Mon Feb 2 15:11:27 CET 2009 - kmachalkova@suse.cz - Read/write Host::write_hostname variable by Host module only, override in inst_hostname if applicable (bnc#469752) ------------------------------------------------------------------- Thu Jan 29 11:59:48 CET 2009 - kmachalkova@suse.cz - Proxy finish popup is back - notify user about the need to relogin to apply new settings (bnc#458708) ------------------------------------------------------------------- Mon Jan 26 13:30:16 CET 2009 - mzugec@suse.cz - lan : button labeling (bnc#440551) ------------------------------------------------------------------- Mon Jan 26 13:22:37 CET 2009 - mzugec@suse.cz - host : button labeling (bnc#440521) ------------------------------------------------------------------- Mon Jan 26 12:56:46 CET 2009 - mzugec@suse.cz - proxy : button labeling (bnc#440535) ------------------------------------------------------------------- Mon Jan 26 12:42:48 CET 2009 - mzugec@suse.cz - remote : button labeling (bnc#440536) ------------------------------------------------------------------- Mon Jan 26 12:22:58 CET 2009 - mzugec@suse.cz - dsl : button labeling (bnc#440546) ------------------------------------------------------------------- Mon Jan 26 10:53:10 CET 2009 - mzugec@suse.cz - modem : button labeling (bnc#440549) ------------------------------------------------------------------- Mon Jan 26 10:34:59 CET 2009 - mzugec@suse.cz - ISDN : button labeling (bnc#440548) ------------------------------------------------------------------- Mon Jan 26 09:29:12 CET 2009 - mzugec@suse.cz - removed fake hwinfo ------------------------------------------------------------------- Thu Jan 22 14:39:20 CET 2009 - mzugec@suse.cz - improved wlan settings validation (bnc#346693) - 2.18.2 ------------------------------------------------------------------- Wed Jan 21 09:15:03 CET 2009 - mzugec@suse.cz - fix mailformed NAME in ifcfg file when setup network via Linuxrc (bnc#460547) - 2.18.1 ------------------------------------------------------------------- Fri Jan 16 16:50:13 CET 2009 - mzugec@suse.cz - run isdn only when needed (thanks to Karsten Keil) (bnc#104590) - 2.18.0 ------------------------------------------------------------------- Fri Jan 16 11:47:51 CET 2009 - mzugec@suse.cz - ISDN: use UNIQUE to match device with configuration (bnc#407683) - 2.17.64 ------------------------------------------------------------------- Mon Jan 12 19:46:59 CET 2009 - mzugec@suse.de - fixed typo (bnc#441897) ------------------------------------------------------------------- Mon Jan 12 16:44:12 CET 2009 - kmachalkova@suse.cz - Do not reset default gw if the interface is set to 'No IP address' mode ( reset iff it is set to DHCP - bnc#460262) ------------------------------------------------------------------- Wed Jan 7 16:45:59 CET 2009 - mzugec@suse.cz - set layer2 bit and LLADDR for s390 qeth devices (bnc#457189) - 2.17.63 ------------------------------------------------------------------- Mon Dec 8 12:22:25 CET 2008 - kmachalkova@suse.cz - Really delete hostname entries from /etc/hosts, not only from UI (bnc#455862) - Conversion to/from punycode for non-ascii character hostnames (bnc#448486) - Fixed parsing ot /etc/hosts - tabs are valid field separators (bnc#443237) - 2.17.62 ------------------------------------------------------------------- Thu Dec 4 14:45:42 CET 2008 - mzugec@suse.cz - in bridge proposal configure STARTMODE=onboot (bnc#450670) - 2.17.61 ------------------------------------------------------------------- Tue Dec 2 17:42:02 CET 2008 - kmachalkova@suse.cz - Allow setting hostname even if network is NM-controlled (bnc#444967) - Write only limited set of values (NetworkConfig, DNS, Hostname) in case of NM on installed system, do not restart/reload network ------------------------------------------------------------------- Tue Dec 2 14:00:09 CET 2008 - ug@suse.de - rnc file fixed ------------------------------------------------------------------- Fri Nov 28 16:52:22 CET 2008 - mzugec@suse.cz - don't show "no network running" popup for automatic installation (bnc#449777) - 2.17.60 ------------------------------------------------------------------- Fri Nov 28 14:58:43 CET 2008 - mzugec@suse.cz - support for portnumber option (fate#304080) - 2.17.59 ------------------------------------------------------------------- Thu Nov 27 11:21:48 CET 2008 - kmachalkova@suse.cz - Removed source of UI syntax error in ISDN - invalid widget ID (bnc#446346) - Make IP/Netmask/Hostname widgets h-stretched (bnc#447897) ------------------------------------------------------------------- Wed Nov 26 17:19:46 CET 2008 - mzugec@suse.de - change device name - validation for existing names (bnc#447480) - 2.17.58 ------------------------------------------------------------------- Fri Nov 21 14:27:20 CET 2008 - kmachalkova@suse.cz - Removed workaround for installing the right NetworkManager frontend - this is now handled by NM itself (bnc#445643) - Removed the single point of dependency on yast2-packager because of that - Avoid passing 'nil' arguments when /etc/HOSTNAME's content is not \n-terminated (bnc#445531) - Adjusted help text (write_hostname is configurable) (bnc#441819) ------------------------------------------------------------------- Thu Nov 20 15:27:41 CET 2008 - mzugec@suse.cz - change in device activation in dsl configuration is not accepted (bnc#442741) - 2.17.57 ------------------------------------------------------------------- Thu Nov 20 10:31:28 CET 2008 - mzugec@suse.cz - during installation write secondary nameserver when available (bnc#446101) - 2.17.56 ------------------------------------------------------------------- Wed Nov 19 18:01:25 CET 2008 - mzugec@suse.cz - marked string for translation (bnc#445687) ------------------------------------------------------------------- Wed Nov 19 17:52:32 CET 2008 - mzugec@suse.cz - fox CLI when bootproto=dhcp, "ip" is required (bnc#444570) ------------------------------------------------------------------- Wed Nov 19 17:14:05 CET 2008 - mzugec@suse.cz - changed default bonding mode into active-backup (bnc#404449) - 2.17.55 ------------------------------------------------------------------- Wed Nov 19 14:36:53 CET 2008 - kmachalkova@suse.cz - Use icewm (instead of fvwm2) as a fallback windowmanager for remote administration (bnc#446561) ------------------------------------------------------------------- Fri Nov 14 17:45:16 CET 2008 - mzugec@suse.cz - fixed typo (bnc#444526) ------------------------------------------------------------------- Thu Nov 13 15:14:16 CET 2008 - ug@suse.de - rnc file fixed ------------------------------------------------------------------- Wed Nov 12 16:54:18 CET 2008 - mzugec@suse.cz - removed kinternet dependency (bnc#429802) - 2.17.54 ------------------------------------------------------------------- Wed Nov 12 14:10:54 CET 2008 - kmachalkova@suse.cz - Set 'modified' flag also when a new host is added (bnc#443239) ------------------------------------------------------------------- Tue Nov 11 15:13:56 CET 2008 - mzugec@suse.cz - fixed CLI examples - 2.14.53 ------------------------------------------------------------------- Mon Nov 10 17:37:35 CET 2008 - mzugec@suse.cz - set default values for bridge (bnc#443413) - 2.14.52 ------------------------------------------------------------------- Wed Nov 5 16:49:02 CET 2008 - mzugec@suse.cz - in case of proposed bridger network do "rcnetwork restart" (timeout popup confirmation) also for vnc/ssh/x11 installation (bnc#431500) - 2.14.51 ------------------------------------------------------------------- Fri Oct 31 12:19:25 CET 2008 - mzugec@suse.de - for devices without hwinfo (bridge, vlan, ...) dont propose STARTMODE ifpluge, propose STARTMODE='auto' - 2.14.50 ------------------------------------------------------------------- Thu Oct 30 17:01:53 CET 2008 - kmachalkova@suse.cz - If no DNS search list exists in 2nd stage of installation, preset current domain name (!= 'site') as a default value (bnc#438167) - Correct fix for bnc#427044: removed workaround for KDE4 and metacity ------------------------------------------------------------------- Thu Oct 30 10:52:58 CET 2008 - mzugec@suse.de - increase time to wait for NM to 15 seconds (bnc#439915) - 2.14.49 ------------------------------------------------------------------- Thu Oct 30 10:38:26 CET 2008 - mzugec@suse.de - for bridged proposal skip devices with no ifcfg (bnc#440132) - 2.14.48 ------------------------------------------------------------------- Thu Oct 30 10:32:12 CET 2008 - mzugec@suse.de - address dialog layout (bnc#439100) ------------------------------------------------------------------- Thu Oct 30 09:30:54 CET 2008 - mzugec@suse.de - fixed exception when propose bridged network (bnc#439978) - 2.14.47 ------------------------------------------------------------------- Wed Oct 29 10:51:00 CET 2008 - kmachalkova@suse.cz - Fit internet test dialog into 80x24 console (bnc#433091) ------------------------------------------------------------------- Mon Oct 27 13:24:33 CET 2008 - kmachalkova@suse.cz - Remote administration (VNC): service name for opening port in firewall is 'service:xorg-x11-server'(bnc#431971) - Make sure at least one windowmanager is installed if VNC is enabled, taking (almost) all shipped ones into account (bnc#427044) ------------------------------------------------------------------- Mon Oct 27 12:37:38 CET 2008 - mzugec@suse.cz - during installation export sysconfig network settings into NetworkManager - on running system disable lan UI for NM (bnc#433084) - 2.17.46 ------------------------------------------------------------------- Fri Oct 24 13:00:29 CEST 2008 - mzugec@suse.de - don't propose bridged network in DomU (bnc#437628) - 2.17.45 ------------------------------------------------------------------- Thu Oct 23 17:53:01 CEST 2008 - mzugec@suse.de - clone udev rules in AY (bnc#434103) - 2.17.44 ------------------------------------------------------------------- Tue Oct 21 16:33:54 CEST 2008 - mzugec@suse.de - fixed device description (bnc#437326) - 2.17.43 ------------------------------------------------------------------- Mon Oct 20 18:12:05 CEST 2008 - mzugec@suse.de - installation via p-t-p devices (bnc#436956) - 2.17.42 ------------------------------------------------------------------- Wed Oct 15 11:48:46 CEST 2008 - ug@suse.de - rnc file fixed - 2.17.41 ------------------------------------------------------------------- Mon Oct 13 10:10:18 CEST 2008 - locilka@suse.cz - Fixed help texts (bnc#430521) - 2.17.40 ------------------------------------------------------------------- Thu Oct 9 12:04:21 CEST 2008 - mzugec@suse.de - fixed IPv6 prefixlen problem (bnc#428128) - 2.17.39 ------------------------------------------------------------------- Thu Oct 9 10:21:52 CEST 2008 - mzugec@suse.de - for s390 devices added AY read/write support (fate#304938) - 2.17.38 ------------------------------------------------------------------- Mon Oct 6 14:08:39 CEST 2008 - mzugec@suse.de - added support for HSI (s390) devices (fate#304938) - 2.17.37 ------------------------------------------------------------------- Mon Oct 6 13:26:49 CEST 2008 - visnov@suse.cz - adapt to new Confirm::Detection API (bnc #431276) ------------------------------------------------------------------- Sat Oct 4 11:25:21 CEST 2008 - mzugec@suse.de - adapt yast to configure network devices on s390 using udev (fate#304938) - 2.17.36 ------------------------------------------------------------------- Thu Oct 2 21:21:38 CEST 2008 - mzugec@suse.de - check NM plugin after network is up (bnc#427374) - 2.17.35 ------------------------------------------------------------------- Wed Oct 1 15:57:16 CEST 2008 - mzugec@suse.de - use rpcbind instead of portmap for nfs installation (bnc#423026) - 2.17.34 ------------------------------------------------------------------- Wed Oct 1 14:13:17 CEST 2008 - mzugec@suse.de - use Service::Restart instead of bash agent - don't restart network twice in Lan::Write() - 2.17.33 ------------------------------------------------------------------- Thu Sep 25 19:28:57 CEST 2008 - mzugec@suse.de - copy udev files for s390 (bnc#422150) - 2.17.32 ------------------------------------------------------------------- Mon Sep 22 16:07:34 CEST 2008 - mzugec@suse.de - add "need firmware" into overview description (bnc#327549) - 2.17.31 ------------------------------------------------------------------- Mon Sep 22 11:20:12 CEST 2008 - mzugec@suse.de - Modem: check return value of installation (bnc#387716) - 2.17.30 ------------------------------------------------------------------- Fri Sep 19 17:45:23 CEST 2008 - mzugec@suse.de - button labeling in dsl module (bnc#398505) - button labeling in modem module (bnc#398508) - 2.17.29 ------------------------------------------------------------------- Fri Sep 19 14:36:53 CEST 2008 - mzugec@suse.de - fixed detection of dhcp devices (bnc#427669) - 2.17.28 ------------------------------------------------------------------- Thu Sep 18 11:44:49 CEST 2008 - jsrain@suse.cz - use release notes of all products when checking internet connection (bnc #413444) - 2.17.27 ------------------------------------------------------------------- Tue Sep 16 15:59:54 CEST 2008 - mzugec@suse.de - testsuite adapted to new changes (call yast2::XML) ------------------------------------------------------------------- Mon Sep 15 16:36:58 CEST 2008 - mzugec@suse.de - fixed testsuite ------------------------------------------------------------------- Fri Sep 12 15:36:38 CEST 2008 - mzugec@suse.cz - hyperlinks to revert bridged proposal (FaTE#303386) - 2.17.26 ------------------------------------------------------------------- Fri Sep 12 11:39:38 CEST 2008 - kmachalkova@suse.cz - Added CLI support for routing settings (FaTE#120078) - 2.17.26 ------------------------------------------------------------------- Wed Sep 10 16:00:40 CEST 2008 - mzugec@suse.de - special proposal for virtualization network (fate#303386) - 2.17.25 ------------------------------------------------------------------- Mon Sep 8 14:12:22 CEST 2008 - mzugec@suse.cz - button labeling in isdn module (fate#120373) ------------------------------------------------------------------- Mon Sep 8 13:44:42 CEST 2008 - mzugec@suse.cz - proofread - 2.17.24 ------------------------------------------------------------------- Fri Sep 5 16:20:12 CEST 2008 - mzugec@suse.cz - fixed button labeling (bnc#398509) ------------------------------------------------------------------- Fri Sep 5 14:34:01 CEST 2008 - mzugec@suse.cz - support for InfiniBand (fate#304870), (fate#304115) - 2.17.23 ------------------------------------------------------------------- Thu Sep 4 16:10:43 CEST 2008 - mzugec@suse.cz - alignment of add/edit/delete (bnc#421037) ------------------------------------------------------------------- Thu Sep 4 16:04:09 CEST 2008 - mzugec@suse.cz - alignment of add/edit/delete (bnc#421033) ------------------------------------------------------------------- Thu Sep 4 15:18:14 CEST 2008 - mzugec@suse.cz - IPv6 configuration (fate#304397) - installation with IPv6 (fate#302926) - 2.17.22 ------------------------------------------------------------------- Thu Sep 4 12:47:25 CEST 2008 - mzugec@suse.cz - fixed yast lan list configured|unconfigured (bnc#420449) - 2.17.21 ------------------------------------------------------------------- Wed Sep 3 10:50:48 CEST 2008 - kmachalkova@suse.cz - DNS data configuration adapted to using netconfig (resolv.conf is no longer written directly)(FaTE#303618) ------------------------------------------------------------------- Mon Aug 18 09:03:53 CEST 2008 - mzugec@suse.cz - fixed Lan::Required() function - 2.17.20 ------------------------------------------------------------------- Fri Aug 15 16:27:57 CEST 2008 - mzugec@suse.cz - switch regarding 127.0.0.2 entry in /etc/hosts by control.xml (fate#303875) - 2.17.19 ------------------------------------------------------------------- Thu Aug 14 10:31:37 CEST 2008 - mzugec@suse.cz - change hardcoded wlan0 into real device ------------------------------------------------------------------- Thu Aug 14 08:54:06 CEST 2008 - mzugec@suse.cz - added "Scan Network" button into wireless dialog (bnc#415359) - 2.17.18 ------------------------------------------------------------------- Wed Aug 6 13:00:12 CEST 2008 - mzugec@suse.cz - increase default idle time-out for modem connection (fate#303429) - 2.17.17 ------------------------------------------------------------------- Wed Aug 6 09:18:00 CEST 2008 - mzugec@suse.cz - installation via wireless (bnc#223570) - possibility to add bond device into bridge and device with /32 prefixlen (bnc#405343) - 2.17.16 ------------------------------------------------------------------- Tue Aug 5 10:28:41 CEST 2008 - mzugec@suse.cz - improved help text (bnc#376063) ------------------------------------------------------------------- Mon Aug 4 15:56:34 CEST 2008 - mzugec@suse.cz - for ssh/vnc installation don't reload/restart network because possibility of IP change (bnc#347482) - 2.17.15 ------------------------------------------------------------------- Mon Aug 4 13:22:38 CEST 2008 - mzugec@suse.cz - improved Lan::Packages() function - added STARTMODE=onboot for tun/tap devices (FaTE#302184) - 2.17.14 ------------------------------------------------------------------- Mon Jul 28 11:06:05 CEST 2008 - mzugec@suse.cz - use all devices for InternetTest, not only eth (bnc#400632) - 2.17.13 ------------------------------------------------------------------- Fri Jul 25 16:19:08 CEST 2008 - mzugec@suse.cz - initial support for TUN/TAP (FaTE#302184) - 2.17.12 ------------------------------------------------------------------- Wed Jul 23 15:17:46 CEST 2008 - mzugec@suse.cz - convert eth-id-xx.. device names in AY profile into ethx and udev rule - 2.17.11 ------------------------------------------------------------------- Tue Jul 22 12:46:07 CEST 2008 - mzugec@suse.cz - 2.17.10 - don't write udev rules in 2nd stage from AY ------------------------------------------------------------------- Fri Jul 18 13:13:47 CEST 2008 - mzugec@suse.cz - don't replace udev rules file by AY if nothing defined in profile (bnc#408338) - 2.17.9 ------------------------------------------------------------------- Thu Jul 17 18:12:13 CEST 2008 - mzugec@suse.de - default options for bonding (bnc#404449) - 2.17.8 ------------------------------------------------------------------- Wed Jul 9 16:06:44 CEST 2008 - mzugec@suse.de - configure IPv6 static IP given from Linuxrc (FaTE#302926) - 2.17.7 ------------------------------------------------------------------- Tue Jul 1 17:51:19 CEST 2008 - mzugec@suse.de - support for "/PREFIXLEN" in aliases - common mask/prefix validator - IPv6 support in aliases - 2.17.6 ------------------------------------------------------------------- Tue Jun 24 16:38:56 CEST 2008 - mzugec@suse.cz - correctly show bonding slaves (bnc#401719) - 2.17.5 ------------------------------------------------------------------- Sat Jun 21 19:23:33 CEST 2008 - mzugec@suse.cz - enable smpppd when dsl connection configured (bnc#397966) - 2.17.4 ------------------------------------------------------------------- Fri Jun 20 15:11:11 CEST 2008 - mzugec@suse.cz - download firmware for b43 (bnc#400846) - 2.17.3 ------------------------------------------------------------------- Thu Jun 19 19:04:03 CEST 2008 - mzugec@suse.cz - CLI support for VLAN, bonding, bridge - 2.17.2 ------------------------------------------------------------------- Wed Jun 18 12:16:54 CEST 2008 - mzugec@suse.de - initial support for IPv6 - prefix parameter in CLI - support for "/24" syntax as prefixlen - 2.17.1 ------------------------------------------------------------------- Fri Jun 13 17:07:11 CEST 2008 - mzugec@suse.cz - network installation broken (bnc#399645) - remove all historic dhcp-test related code - 2.17.0 ------------------------------------------------------------------- Fri Jun 13 16:23:20 CEST 2008 - mzugec@suse.cz - sleep while waiting for network (bnc#399062) ------------------------------------------------------------------- Fri Jun 13 16:15:05 CEST 2008 - mzugec@suse.cz - button enable/disable behavior in Internet Test (bnc#391857) ------------------------------------------------------------------- Fri Jun 6 17:16:20 CEST 2008 - mzugec@suse.cz - installation onto nfs - STARTMODE='nfsroot' (bnc#397410) - 2.16.50 ------------------------------------------------------------------- Thu Jun 5 13:59:51 CEST 2008 - mzugec@suse.cz - host module crashes when editing 'localhost' hostnames (bnc#397322) - fixed hosts write - 2.16.49 ------------------------------------------------------------------- Wed Jun 4 12:53:11 CEST 2008 - mzugec@suse.cz - fixed command-line (bnc#397016) - 2.16.48 ------------------------------------------------------------------- Mon Jun 2 16:19:15 CEST 2008 - mzugec@suse.cz - removed html tags in progress bar (bnc#393966) ------------------------------------------------------------------- Mon Jun 2 09:21:09 CEST 2008 - mzugec@suse.cz - set link status up for all interfaces during installation (bnc#395014) - 2.16.47 ------------------------------------------------------------------- Mon May 26 13:47:40 CEST 2008 - kmachalkova@suse.cz - Use Product::ReadProduct() to obtain release notes URL, thus make the internet test (2nd stage) work again (bnc#390738) - 2.16.46 ------------------------------------------------------------------- Thu May 22 13:34:28 CEST 2008 - kmachalkova@suse.cz - Fit Global Options dialog into 80x25 screen (one line missing) (bnc#392969) ------------------------------------------------------------------- Mon May 19 11:31:21 CEST 2008 - mzugec@suse.de - fixed translation text (bnc#391180) ------------------------------------------------------------------- Sun May 18 21:44:04 CEST 2008 - mzugec@suse.de - fixed mangle device name (bnc#391802) - 2.16.45 ------------------------------------------------------------------- Fri May 16 16:40:22 CEST 2008 - jsrain@suse.cz - added categories Settings and System into desktop file (bnc #382778) ------------------------------------------------------------------- Thu May 15 12:52:01 CEST 2008 - kmachalkova@suse.cz - Generate random hostname also in automatic configuration (2nd stage) - Use 127.0.0.2 hack also in automatic configuration (bnc#383336) - Accept Tab character as a valid hostname vs. alias separator (thanks to msvec) (bnc#382068) - 2.16.44 ------------------------------------------------------------------- Mon May 12 13:44:27 CEST 2008 - mzugec@suse.cz - misleading description of firewall "No Zone" (bnc#388703) - 2.16.43 ------------------------------------------------------------------- Sun May 11 17:37:54 CEST 2008 - mzugec@suse.de - for NetControl propose only link:true interfaces (bnc#389131) - 2.16.42 ------------------------------------------------------------------- Fri May 9 16:51:31 CEST 2008 - kmachalkova@suse.cz - Remote administration: make windowmanager detection KDE4 aware - consider also kdebase4 pkg (bnc#381708) ------------------------------------------------------------------- Fri May 9 07:35:15 CEST 2008 - mzugec@suse.de - just edit udev rules, not replace them (bnc#383320) - 2.16.41 ------------------------------------------------------------------- Mon Apr 21 15:15:53 CEST 2008 - mzugec@suse.cz - improved algorithm to require gnome/kde version of NetworkManager (bnc#380774) - 2.16.40 ------------------------------------------------------------------- Fri Apr 18 15:46:22 CEST 2008 - jsrain@suse.cz - merged texts from proofread - 2.16.39 ------------------------------------------------------------------- Tue Apr 15 08:54:14 CEST 2008 - jsuchome@suse.cz - fixed testsuite again (do not save the logs) - 2.16.38 ------------------------------------------------------------------- Mon Apr 14 22:18:24 CEST 2008 - mzugec@suse.cz - removed fake hwinfo ------------------------------------------------------------------- Mon Apr 14 17:09:59 CEST 2008 - mzugec@suse.cz - install firmware for bcm4xx wireless (FaTE#302130) - 2.16.37 ------------------------------------------------------------------- Mon Apr 14 14:56:03 CEST 2008 - kmachalkova@suse.cz - Unified button labels (FaTE #120373), esp. in installation clients ------------------------------------------------------------------- Fri Apr 4 19:06:48 CEST 2008 - mzugec@suse.de - fixed testsuite ------------------------------------------------------------------- Fri Apr 4 18:32:34 CEST 2008 - mzugec@suse.de - support for default gateway metrics (FaTE#301948) - 2.16.36 ------------------------------------------------------------------- Fri Apr 4 18:30:17 CEST 2008 - locilka@suse.cz - Enhanced user-feedback during automatic installation. - Adjusted RPM dependencies. ------------------------------------------------------------------- Thu Apr 3 20:13:17 CEST 2008 - mzugec@suse.de - fixed modem - add new (bnc#364564) - fixed dsl - add new (bnc#376059) - 2.16.35 ------------------------------------------------------------------- Thu Apr 3 14:56:13 CEST 2008 - mzugec@suse.de - option in UI for dhcpcd "-G" - don't touch default route (bnc#366948) - 2.16.34 ------------------------------------------------------------------- Thu Apr 3 10:32:40 CEST 2008 - kmachalkova@suse.cz - DNS & hostname and Routing standalone modules removed from control center (desktop files only, it is still possible to run them from commandline) (FaTE #303470) - Network Card module renamed to Network Settings (FaTE #303470) ------------------------------------------------------------------- Wed Apr 2 22:24:33 CEST 2008 - mzugec@suse.de - adapted Lan::HaveXenBridge() (bnc#375606) - 2.16.33 ------------------------------------------------------------------- Wed Apr 2 22:15:08 CEST 2008 - mzugec@suse.de - use "password" type widget for wpa-eap password (bnc#373632) - 2.16.32 ------------------------------------------------------------------- Tue Apr 1 21:49:06 CEST 2008 - mzugec@suse.de - fixed autoyast profile section (bnc#376321) - 2.16.31 ------------------------------------------------------------------- Tue Apr 1 17:09:58 CEST 2008 - mzugec@suse.de - improved text for devices without kernel device (bnc#375805) - 2.16.30 ------------------------------------------------------------------- Mon Mar 31 15:53:06 CEST 2008 - kmachalkova@suse.cz - Exit remote administration module on closing GUI window (clicking on [x]) (bnc#372321) - Improved 'edit udev rules' dialog (bnc#367239) - 2.16.29 ------------------------------------------------------------------- Thu Mar 27 10:40:04 CET 2008 - mzugec@suse.de - fixed package build ------------------------------------------------------------------- Tue Mar 25 18:15:16 CET 2008 - mzugec@suse.de - possibility to use unconfigured device for vlan, bond and bridge (bnc#369195) - 2.16.28 ------------------------------------------------------------------- Fri Mar 21 13:35:40 CET 2008 - mzugec@suse.de - for alias elements use aliasX instead of X (bnc#369195) - 2.16.27 ------------------------------------------------------------------- Mon Mar 17 20:50:58 CET 2008 - mzugec@suse.de - support for writing driver parameters (bnc#362535) - 2.16.26 ------------------------------------------------------------------- Mon Mar 17 12:43:32 CET 2008 - jsrain@suse.cz - added 'StartupNotify=true' to the desktop file (bnc #304964) ------------------------------------------------------------------- Sun Mar 16 14:48:24 CET 2008 - mzugec@suse.de - for devices attached to bridge remove configuration (bnc#367938) - 2.16.25 ------------------------------------------------------------------- Sat Mar 15 12:29:52 CET 2008 - mzugec@suse.de - allow to use bridge with unconfigured device (bnc#369195) - 2.16.24 ------------------------------------------------------------------- Thu Mar 13 10:53:44 CET 2008 - kmachalkova@suse.cz - New help texts for udev rules (obsoleted help text removed - bnc#328230) - Improved layout of some dialogs ( edit udev rule - bnc#367239, proxy - bnc#362577) ------------------------------------------------------------------- Mon Mar 10 12:42:21 CET 2008 - mzugec@suse.de - allow using vlan also with bond and bridge devices (bnc#367093) - 2.16.24 ------------------------------------------------------------------- Tue Feb 26 18:18:54 CET 2008 - mzugec@suse.de - automatic refresh of selection list box (bnc#363423) - 2.16.23 ------------------------------------------------------------------- Wed Feb 20 07:58:15 CET 2008 - coolo@suse.de - fix the spec file header ------------------------------------------------------------------- Tue Feb 19 19:52:07 CET 2008 - coolo@suse.de - remove obsolete call to UI::SetModulename ------------------------------------------------------------------- Mon Feb 4 15:57:49 CET 2008 - mzugec@suse.de - keep firewall zone information when changing deive name (#358523) - 2.16.22 ------------------------------------------------------------------- Sun Jan 27 21:01:33 CET 2008 - coolo@suse.de - fix changelog ------------------------------------------------------------------- Thu Jan 17 15:19:55 CET 2008 - mzugec@suse.cz - remove NetworkInterfaces::device_name occurence - set interface to fw zone correctly (#327561) - 2.16.21 ------------------------------------------------------------------- Fri Jan 11 14:06:52 CET 2008 - mzugec@suse.de - fixed testsuite ------------------------------------------------------------------- Thu Jan 10 13:23:07 CET 2008 - mzugec@suse.cz - fixed netmask validation (#352425) - 2.16.20 ------------------------------------------------------------------- Thu Jan 10 12:35:15 CET 2008 - mzugec@suse.cz - use NetworkInterfaces instead of NetworkDevices - 2.16.19 ------------------------------------------------------------------- Mon Jan 7 11:49:33 CET 2008 - kmachalkova@suse.cz - Enable setting a route without interface (use '-' which stands for 'any') (#93996) - Merged proofread texts - Dependency on yast2-country replaced with yast2-country-data ------------------------------------------------------------------- Thu Dec 13 21:58:58 CET 2007 - mzugec@suse.cz - interface names manage support - FaTE #300636 - 2.16.18 ------------------------------------------------------------------- Thu Dec 13 18:33:06 CET 2007 - mzugec@suse.de - in Proposal() re-read NetworkDevices again (#170558) to propose correct values when toggle NM - don't propose ifplugd for NM and virtual devices (bond, vlan, br) - devices description (short, long) moved to NetworkDevices - 2.16.17 ------------------------------------------------------------------- Tue Dec 11 00:01:29 CET 2007 - mzugec@suse.cz - show description for devices attached to vlan - show description for bridged devices - 2.16.16 ------------------------------------------------------------------- Sun Dec 9 12:36:36 CET 2007 - mzugec@suse.cz - support for bridging - FaTE (#302183) - 2.16.15 ------------------------------------------------------------------- Fri Dec 7 15:48:19 CET 2007 - mzugec@suse.cz - support for VLAN - FaTE (#142127) - 2.16.14 ------------------------------------------------------------------- Mon Dec 3 18:54:09 CET 2007 - mzugec@suse.cz - modprobe ndiswrapper before hwinfo when needed (#343893) - 2.16.13 ------------------------------------------------------------------- Mon Dec 3 13:14:15 CET 2007 - mzugec@suse.cz - warning for NM and password (#225793) - 2.16.12 ------------------------------------------------------------------- Thu Nov 29 15:39:35 CET 2007 - mzugec@suse.cz - when user change BOOTPROTO to NONE, set STARTMODE to off - for hotplug devices set STARTMODE=hotplug (#132583) - 2.16.11 ------------------------------------------------------------------- Wed Nov 21 18:28:53 CET 2007 - mzugec@suse.cz - choosing pptp server by domain name, not only ip (#241461) thanks to nderkach@gmail.com - 2.16.10 ------------------------------------------------------------------- Wed Nov 21 17:41:01 CET 2007 - kmachalkova@suse.cz - Allow space characters in proxy username (#337048) - Quote user/password string in test proxy command (it may contain special characters) (#338264) ------------------------------------------------------------------- Wed Nov 21 16:32:37 CET 2007 - mzugec@suse.cz - help text kinternet -> KInternet (#237172) ------------------------------------------------------------------- Tue Nov 20 12:28:29 CET 2007 - locilka@suse.cz - 'Copy 70-persistent-cd.rules' functionality has been moved to yast2-installation (#328126). ------------------------------------------------------------------- Thu Nov 15 19:28:51 CET 2007 - mzugec@suse.de - FaTE #302586 - support for qeth devices in bonding - 2.16.9 ------------------------------------------------------------------- Mon Nov 12 15:18:38 CET 2007 - mzugec@suse.cz - the hostname dialog proposes to update it by DHCP on a laptop (#326102) - 2.16.8 ------------------------------------------------------------------- Fri Nov 9 14:45:11 CET 2007 - kmachalkova@suse.cz - host.rnc modified to accept empty section as a valid one - Filter out host IPs with empty hostname so that valid autoyast profile is created (both #335120) - 2.16.7 ------------------------------------------------------------------- Fri Nov 2 14:18:37 CET 2007 - locilka@suse.cz - YCP Module Internet moved to yast2.rpm to break several dependencies on yast2-network. - Created new YCP module InternetDevices (some functions from Internet module were moved there). - Adjusted RPM dependencies. - Adjusted Internet testsuite. - 2.16.6 ------------------------------------------------------------------- Fri Oct 26 15:01:43 CEST 2007 - mzugec@suse.de - leave WIRELESS_KEY_X and WIRELESS_WPA_PSK empty for "no encryption" auth mode (#335501) - 2.16.5 ------------------------------------------------------------------- Fri Oct 26 12:38:52 CEST 2007 - mzugec@suse.de - when select dhcp don't remove static default GW for hotplug (usb/pcmci) devices(#307102) - 2.16.4 ------------------------------------------------------------------- Wed Oct 10 18:19:37 CEST 2007 - mzugec@suse.cz - fixed displayed name for network device (#330994) - 2.16.3 ------------------------------------------------------------------- Wed Oct 10 10:39:47 CEST 2007 - kmachalkova@suse.cz - Escape backslashes in usernames also in .curlrc (#331038) - 2.16.2 ------------------------------------------------------------------- Wed Oct 3 09:57:51 CEST 2007 - mvidner@suse.cz - Do not try to package COPYRIGHT.english, it is gone from devtools (#299144). - 2.16.1 ------------------------------------------------------------------- Thu Sep 27 14:21:32 CEST 2007 - kmachalkova@suse.cz - i18n: Missing strings marked for translation (modem + netcard gen. setup) (#328191) ------------------------------------------------------------------- Tue Sep 25 21:28:00 CEST 2007 - mzugec@suse.cz - fixed routing widget enabling (#326042) - 2.16.0 ------------------------------------------------------------------- Tue Sep 25 12:44:03 CEST 2007 - mzugec@suse.cz - write resolv.conf after change from dhcp to static (#327074) reload/restart network before this to put correct resolv.conf from dhcp-backup - 2.15.81 ------------------------------------------------------------------- Mon Sep 24 11:01:05 CEST 2007 - mzugec@suse.cz - for update system don't copy network from inst_sys (#325738) - 2.15.80 ------------------------------------------------------------------- Fri Sep 21 16:03:44 CEST 2007 - kmachalkova@suse.cz - Remember correctly device number and device module for manually added cards (#308762) ------------------------------------------------------------------- Fri Sep 21 12:22:00 CEST 2007 - kmachalkova@suse.cz - Correct manual adding of network devices and assigning firewall zones (pass 'eth1' 'wlan0' string instead of 'eth-eth1' or 'wlan-wlan0') (partly #308763) - 2.15.79 ------------------------------------------------------------------- Thu Sep 20 18:40:22 CEST 2007 - kmachalkova@suse.cz - Always add '127.0.0.2 host.site host' line into /etc/hosts (if 'Write hostname to /etc/hosts' is enabled) to make hostname resolvable even without active network (#304632) - 2.15.78 ------------------------------------------------------------------- Thu Sep 20 16:59:25 CEST 2007 - mvidner@suse.cz - Escape quotes in NAME in save_network (#305343). ------------------------------------------------------------------- Tue Sep 18 14:54:18 CEST 2007 - kmachalkova@suse.cz - Removed all udev rules workarounds (manually removing lockfiles, tmp rules, calling udevtrigger) - just copy udev rules for net and cd to the installed system iff they don't already exist (#292375) - 2.15.77 ------------------------------------------------------------------- Wed Sep 12 13:49:17 CEST 2007 - kmachalkova@suse.cz - Do not re-add network devices (incl. loopback) into available devices list each time Lan::Import() is called (#308132) - Do not rewrite udev rules file during update (if it already exists in Installation::destdir) (#293366c#7) - 2.15.76 ------------------------------------------------------------------- Fri Sep 7 12:55:00 CEST 2007 - mzugec@suse.cz - fixed firmware installation for wlan cards (#307401) - 2.15.75 ------------------------------------------------------------------- Thu Sep 6 16:22:18 CEST 2007 - mzugec@suse.cz - fixed missing space between source and destination when copy udev rules into installed system (#307162) ------------------------------------------------------------------- Thu Sep 6 14:24:50 CEST 2007 - mzugec@suse.cz - Finish button renamed to Accept for installation (#307789) ------------------------------------------------------------------- Thu Sep 6 14:05:18 CEST 2007 - mzugec@suse.cz - for `abort in network dialogs use LanItems::Rollback (#307779) - workflow for add/edit card can be aborted (#307778) - 2.15.74 ------------------------------------------------------------------- Wed Sep 5 14:23:30 CEST 2007 - kmachalkova@suse.cz - Proxy testsuite adjusted to correct .curlrc syntax (#305163 related) - Fix downloading release notes with proxy (#305222) - Save proxy settings at the end of 1st stage of installation (#298001) - Save nameserver entry at the end of 1st stage of installation even if no search domain is present in install.inf (#298001) ------------------------------------------------------------------- Tue Sep 4 15:14:46 CEST 2007 - mzugec@suse.cz - WLAN Installation - save data from install.inf (#223570) - 2.15.73 ------------------------------------------------------------------- Mon Sep 3 14:43:39 CEST 2007 - mzugec@suse.cz - install smartlink-softmodem package for devices with *ttySL* device files (#284287) - correctly match configuration with hardware for modem devices using UDI instead of udi - 2.15.72 ------------------------------------------------------------------- Mon Sep 3 09:37:00 CEST 2007 - mzugec@suse.cz - fixed Proxy testsuite ------------------------------------------------------------------- Sat Sep 1 09:01:47 CEST 2007 - mzugec@suse.cz - read NISDomain instead of NisDomain from install.inf ------------------------------------------------------------------- Fri Aug 31 16:04:05 CEST 2007 - locilka@suse.cz - Using --proxy-user and --proxy in /root/.curlrc (#305163). - Changing priorities in syntax for /root/.curlrc parser (#305163). ------------------------------------------------------------------- Fri Aug 31 15:38:31 CEST 2007 - mzugec@suse.cz - autoyast support for udev rules and backport compatibility with old-style network devices names (#303916) - 2.15.71 ------------------------------------------------------------------- Tue Aug 28 14:59:38 CEST 2007 - mzugec@suse.cz - write NAME in propose - (#301977) - 2.15.70 ------------------------------------------------------------------- Mon Aug 27 17:46:39 CEST 2007 - mzugec@suse.cz - TestCase 388144 - check if ip is already in use (#304250) - 2.15.69 ------------------------------------------------------------------- Mon Aug 27 11:18:11 CEST 2007 - mzugec@suse.cz - correctly handle NisDomain option from install.inf (#303844) - 2.15.68 ------------------------------------------------------------------- Fri Aug 24 16:55:51 CEST 2007 - mzugec@suse.cz - use "netcard" macro from NetworkDevices (#303847) - 2.15.67 ------------------------------------------------------------------- Fri Aug 24 16:42:17 CEST 2007 - mzugec@suse.cz - write extra drivers into 79-yast2-drivers.rules (#300892) - handle renamed udev rule for network devices (#302544) - 2.15.66 ------------------------------------------------------------------- Fri Aug 24 14:40:53 CEST 2007 - kmachalkova@suse.cz - Adjusted layout of several dialogs to fit 80x25 screen ------------------------------------------------------------------- Tue Aug 21 10:53:41 CEST 2007 - mzugec@suse.cz - correctly write wlan configuration (#297616) - 2.15.65 ------------------------------------------------------------------- Fri Aug 17 15:51:42 CEST 2007 - mzugec@suse.cz - use correct NAME for eth/wlan devices (#300670) - 2.15.64 ------------------------------------------------------------------- Fri Aug 17 12:59:40 CEST 2007 - mzugec@suse.cz - fixed proposal dialog for DSL, ISDN and modem (#298273) - 2.15.63 ------------------------------------------------------------------- Wed Aug 15 16:55:49 CEST 2007 - mzugec@suse.cz - for NM enable to change default gateway (#299448) - 2.15.62 ------------------------------------------------------------------- Tue Aug 14 23:06:13 CEST 2007 - mzugec@suse.de - save network configuration also when smpppd/kinternet not available for USERCONTROL enabled devices (#299033) - 2.15.61 ------------------------------------------------------------------- Mon Aug 13 18:38:29 CEST 2007 - mzugec@suse.cz - autoyast support for aliases (F302300) - 2.15.60 ------------------------------------------------------------------- Fri Aug 10 20:34:21 CEST 2007 - kmachalkova@suse.cz - Allow specifying different hostnames for different (static) IPs in address dialog (FaTE #2202) ------------------------------------------------------------------- Fri Aug 10 13:20:51 CEST 2007 - mzugec@suse.cz - fixed adding new device - fix for bonding devices - 2.15.59 ------------------------------------------------------------------- Wed Aug 8 15:28:18 CEST 2007 - mzugec@suse.cz - fixed wlan::firmware map - when no interfaces configured and no NM skip InternetTest(#192818) - fixed device selection for InternetTest (#296393) - 2.15.58 ------------------------------------------------------------------- Mon Aug 6 17:57:37 CEST 2007 - mzugec@suse.cz - copy udev rules from inst-sys (#297616) - 2.15.57 ------------------------------------------------------------------- Mon Aug 6 17:40:27 CEST 2007 - mzugec@suse.cz - removed NetworkModules (no more hwcfg files) - 2.15.56 ------------------------------------------------------------------- Thu Jul 26 14:16:36 CEST 2007 - mzugec@suse.cz - fixed edit aliases problem (#294099) - 2.15.55 ------------------------------------------------------------------- Wed Jul 25 22:23:54 CEST 2007 - mzugec@suse.de - new option "No Encryption" in wireless dialog (#213001) - 2.15.54 ------------------------------------------------------------------- Wed Jul 25 16:44:14 CEST 2007 - kmachalkova@suse.cz - A better layout of internet test dialog (#292621, also in 80x25 console) - Splitting off devel-doc package, containing autogenerated docu (FaTE #302461) - 2.15.53 ------------------------------------------------------------------- Tue Jul 24 15:05:58 CEST 2007 - mzugec@suse.cz - fixed command line - fixed help for ipv6 - 2.15.52 ------------------------------------------------------------------- Mon Jul 23 22:48:24 CEST 2007 - mzugec@suse.de - improved text in remote.desktop (#230145) ------------------------------------------------------------------- Mon Jul 23 13:54:32 CEST 2007 - mzugec@suse.de - fixed - ability to set encryption for wlan cards - "no encryption is used" reported for an ethernet card (#257974) - 2.15.51 ------------------------------------------------------------------- Sun Jul 22 14:03:23 CEST 2007 - mzugec@suse.de - fixed testsuite ------------------------------------------------------------------- Fri Jul 20 18:19:27 CEST 2007 - mzugec@suse.de - disable to configure card without kernel device - fixed interface proposal (#292401) - write ipv6 correctly (#288744) - improved firmware database - 2.15.50 ------------------------------------------------------------------- Wed Jul 18 14:50:48 CEST 2007 - mzugec@suse.cz - disallow to configure card without kernel device - copy udev rules for persistent names on installed system - 2.15.49 ------------------------------------------------------------------- Tue Jul 17 07:37:01 CEST 2007 - mzugec@suse.de - no more hwcfg files, don't use getcfg (#292085) - 2.15.48 ------------------------------------------------------------------- Fri Jul 13 22:02:40 CEST 2007 - kmachalkova@suse.cz - Address dialog adapted for 80x25 terminal screen (fix disappearing tabs) - Hostname entry added (FaTE #2202 - does not work yet) ------------------------------------------------------------------- Tue Jul 3 11:11:39 CEST 2007 - kmachalkova@suse.cz - ag_udev_persistent added to .spec file ------------------------------------------------------------------- Mon Jul 2 17:47:46 CEST 2007 - mzugec@suse.cz - fixed delete item - 2.15.47 ------------------------------------------------------------------- Mon Jul 2 16:53:26 CEST 2007 - mzugec@suse.cz - new module LanItems.ycp http://lists.opensuse.org/yast-devel/2007-06/msg00001.html - new udev agent - propose configuration based on interface name (ifcfg-eth0) - use getcfg for matching hwcfg instead of nm_name - use sysfs_id to match configuration instead of udi/unique - 2.15.46 ------------------------------------------------------------------- Thu Jun 21 17:39:03 CEST 2007 - adrian@suse.de - fix changelog entry order ------------------------------------------------------------------- Mon Jun 18 18:08:38 CEST 2007 - mzugec@suse.cz - use correct syntax "default $IP - -" for sysconfig/route ------------------------------------------------------------------- Mon Jun 18 10:12:28 CEST 2007 - mzugec@suse.cz - improved popup string (#257330) ------------------------------------------------------------------- Fri Jun 15 16:05:08 CEST 2007 - mzugec@suse.cz - improved fix for sysconfig/route (#284599) ------------------------------------------------------------------- Fri Jun 15 10:52:42 CEST 2007 - mzugec@suse.cz - don't write resolv.conf and route for dhcp (#284599) - read vendor+device from sysfs instead of NAME - 2.15.45 ------------------------------------------------------------------- Mon Jun 11 17:45:26 CEST 2007 - mzugec@suse.cz - don't write hwcfg when not needed - 2.15.44 ------------------------------------------------------------------- Fri Jun 8 16:59:20 CEST 2007 - mzugec@suse.cz - dsl module: auto reconnect option (#244503) - author : nderkach@gmail.com - 2.15.43 ------------------------------------------------------------------- Fri Jun 8 13:39:28 CEST 2007 - mzugec@suse.cz - install kinternet if there is at least one ISDN device (#161782) - 2.15.42 ------------------------------------------------------------------- Thu Jun 7 17:45:24 CEST 2007 - mzugec@suse.cz - use static keyword for ISA/pnp devices hardware filenames (#208854) - 2.15.41 ------------------------------------------------------------------- Wed Jun 6 16:31:35 CEST 2007 - mzugec@suse.cz - values proposal for hardware dialog - 2.15.40 ------------------------------------------------------------------- Fri Jun 1 11:14:21 CEST 2007 - mzugec@suse.cz - save_network.ycp moved from routines/ to clients/ - Detection.ycp renamed to NetHwDetection.ycp - NetworkStorage.ycp moved to yast2 package - 2.15.39 ------------------------------------------------------------------- Thu May 31 17:44:21 CEST 2007 - mzugec@suse.cz - merge code for select interfaces in InternetTest and Dsl (#117426) - 2.15.38 ------------------------------------------------------------------- Wed May 30 11:34:16 CEST 2007 - mzugec@suse.cz - fixed spec requirements ------------------------------------------------------------------- Tue May 29 12:56:38 CEST 2007 - mzugec@suse.cz - add Confirm::MustBeRoot to all network modules (#276478) - 2.15.37 ------------------------------------------------------------------- Tue May 29 09:03:20 CEST 2007 - mzugec@suse.cz - improve add/edit device dialogs (device type) - 2.15.36 ------------------------------------------------------------------- Mon May 28 17:07:40 CEST 2007 - mzugec@suse.cz - disable routing dialog when NetworkManager used (#178538) - 2.15.35 ------------------------------------------------------------------- Mon May 28 10:20:08 CEST 2007 - mzugec@suse.cz - installation network changes: http://lists.opensuse.org/yast-devel/2007-05/msg00025.html - 2.15.34 ------------------------------------------------------------------- Fri May 25 13:30:04 CEST 2007 - jsrain@suse.cz - removed outdated translations from .desktop-files (#271209) ------------------------------------------------------------------- Tue May 22 13:59:04 CEST 2007 - kmachalkova@suse.cz - Escape backslash characters in proxy auth credentials properly (#256360) - 2.15.33 ------------------------------------------------------------------- Mon May 21 13:57:47 CEST 2007 - kmachalkova@suse.cz - IsHostLocal test extended to include also hostname and/or IP set by DHCP (#163170) ------------------------------------------------------------------- Mon May 14 10:52:43 CEST 2007 - kmachalkova@suse.cz - Correct comparison of installed and downloaded release notes version (to prevent useless error messages) (#269985) ------------------------------------------------------------------- Sun May 13 14:17:08 CEST 2007 - mzugec@suse.cz - fixed create BOND device (#274078) - 2.15.32 ------------------------------------------------------------------- Fri May 11 16:12:27 CEST 2007 - mzugec@suse.cz - possible to change STARMODE in modem (#116368) - 2.15.31 ------------------------------------------------------------------- Mon May 7 10:32:19 CEST 2007 - mzugec@suse.cz - improved output from command line - information about MAC/BusID in devices dialog (#266690) - information about link status - 2.15.30 ------------------------------------------------------------------- Thu May 3 16:55:00 CEST 2007 - kmachalkova@suse.cz - Drop finish popup for proxy - Drop finish popup for remote administration module (#258846) - To store VNC settings, run 'SuSEconfig' for gdm, 'rcxdm reload' otherwise ------------------------------------------------------------------- Wed May 2 18:42:49 CEST 2007 - mzugec@suse.cz - CommandLine interface (no support reported) for dsl, isdn and modem (#269890, #269894, #269899) - 2.15.29 ------------------------------------------------------------------- Thu Apr 26 15:49:14 CEST 2007 - kmachalkova@suse.cz - Make MTU setting an editable combobox with few recommended values + better description in related help text (#267292) ------------------------------------------------------------------- Thu Apr 26 10:56:03 CEST 2007 - mzugec@suse.cz - changed "Stupid Mode" to "Ignore Prompts" in modem ------------------------------------------------------------------- Thu Apr 26 10:26:34 CEST 2007 - mzugec@suse.cz - "change hostname via dhcp" not selected by default (#264915) ------------------------------------------------------------------- Sun Apr 22 12:41:13 CEST 2007 - mzugec@suse.de - hardware dialog moved to tab - additional addreses moved to address tab - changed bootproto dialog - 2.15.28 ------------------------------------------------------------------- Fri Apr 20 15:51:24 CEST 2007 - kmachalkova@suse.cz - Added write progress dialogs to DNS, Routing, Host, Proxy and Remote (administration) modules (#258846) ------------------------------------------------------------------- Mon Apr 16 10:31:02 CEST 2007 - mzugec@suse.cz - /etc/hosts shows incorrect ip address for partition installed via network (#263035) - 2.15.27 ------------------------------------------------------------------- Fri Apr 13 11:36:07 CEST 2007 - kmachalkova@suse.cz - Correct handling of network interface firewall zone, including ommited help text (#257479) - Helptexts adjusted to reflect UI changes (FaTE #120077) - BOOTPROTO_*autoip dropped ------------------------------------------------------------------- Thu Apr 12 16:00:12 CEST 2007 - mzugec@suse.cz - when NetworkManager enabled, install KNetworkManager/GnomeNetworkManager applet(#260532) - during installation propose first connected interface (#256606) - cosmetic fix - don't show IP/NETMASK for BOOTPROTO=NONE in description - 2.15.26 ------------------------------------------------------------------- Tue Apr 10 16:27:46 CEST 2007 - kmachalkova@suse.cz - DHCP client options dialog rewritten to CWM and integrated into General options tab - 2.15.25 ------------------------------------------------------------------- Thu Apr 5 14:25:36 CEST 2007 - kmachalkova@suse.cz - Correct quoting of proxy auth credentials so that special characters are not intepreted by bash (#256360) - Internet test: test proxy settings before downloading release notes. If it fails, try direct connection (#162800, #260407) ------------------------------------------------------------------- Thu Apr 5 10:35:13 CEST 2007 - mzugec@suse.cz - for s390 write hwcfg file although driver doesn't provide busID - 2.15.24 ------------------------------------------------------------------- Thu Apr 5 09:58:01 CEST 2007 - mzugec@suse.cz - fixed option for 'changed by another process' in dns - 2.15.23 ------------------------------------------------------------------- Wed Apr 4 19:08:00 CEST 2007 - mzugec@suse.cz - improve widget handling when dhcp used/not used (#156830) - 2.15.22 ------------------------------------------------------------------- Tue Apr 3 13:36:25 CEST 2007 - kmachalkova@suse.cz - Network installation proposal: * NetworkManager and IPv6 proposals joined into 'General Settings' proposal * Make click on 'General Settings' title open separate dialog with NM and IPv6 options (#255609) - 2.15.21 ------------------------------------------------------------------- Wed Mar 28 16:59:22 CEST 2007 - kmachalkova@suse.cz - Make storing hostname and DNS data work again - Further improvements to UI (FaTE #120077) - Enable/disable VNC service in xinetd only if pkg 'xinetd' is installed (#256385) - 2.15.20 ------------------------------------------------------------------- Tue Mar 27 10:32:46 CEST 2007 - mzugec@suse.cz - yast hangs while configure network (#257347) - 2.15.19 ------------------------------------------------------------------- Thu Mar 22 11:03:36 CET 2007 - mzugec@suse.cz - NetworkStorage - handling alternative connection types (#256371) - 2.15.18 ------------------------------------------------------------------- Wed Mar 21 15:51:37 CET 2007 - mzugec@suse.cz - Service lwresd does not exist (#256344) ------------------------------------------------------------------- Wed Mar 21 15:27:58 CET 2007 - mzugec@suse.cz - Routing does not allow adding routes in Expert (#255731) - 2.15.17 ------------------------------------------------------------------- Tue Mar 13 10:19:20 CET 2007 - kmachalkova@suse.cz - RNC validation file: completed list of wireless options (#211014) ------------------------------------------------------------------- Mon Mar 12 11:48:02 CET 2007 - mzugec@suse.cz - use IPADDR/PREFIXLEN as default instead of NETMASK (#231997) - use HAL UDI instead of UNIQUE - redesign UI into tabs - split global and details (fate #120077) - 2.15.16 ------------------------------------------------------------------- Mon Mar 12 10:01:33 CET 2007 - kmachalkova@suse.cz - Added dependency yast2 >= 2.15.15, removed dependency on yast2-inetd, yast2-core moved to Conflicts: (indirect dependency) ------------------------------------------------------------------- Fri Mar 9 17:19:56 CET 2007 - kmachalkova@suse.cz - Network installation proposal: Do not re-propose firewall zone for the interface if it has been explicitly changed by user in add/edit dialog (#241107) - Disable firewall related functionality (incl. final progress text) if package SuSEfirewall2 is not installed (#249847) ------------------------------------------------------------------- Fri Mar 9 16:03:11 CET 2007 - mzugec@suse.cz - disable finish popup to configure mail (#163955) - 2.15.15 ------------------------------------------------------------------- Wed Feb 14 09:43:28 CET 2007 - kmachalkova@suse.cz - Improved usability of Internet test - indicate clearly that particular step has failed (#121705, #166237) ------------------------------------------------------------------- Tue Feb 13 12:44:02 CET 2007 - mzugec@suse.de - rnc file update ------------------------------------------------------------------- Mon Feb 12 15:02:25 CET 2007 - mzugec@suse.de - add checkbox to disable writing hwcfg-file - 2.15.14 ------------------------------------------------------------------- Fri Feb 9 16:23:50 CET 2007 - kmachalkova@suse.cz - If downloading of the relnotes fails because of server-side error, allow to continue towards YOU and/or registration stuff (#236371) - 2.15.13 ------------------------------------------------------------------- Wed Feb 7 16:00:58 CET 2007 - mzugec@suse.de - fix hwaddr matching (#184438) - 2.15.12 ------------------------------------------------------------------- Tue Feb 6 10:24:06 CET 2007 - mzugec@suse.de - support for handle toggling between OSA Layer2/3 during installation (#184438) - 2.15.11 ------------------------------------------------------------------- Tue Jan 30 09:47:25 CET 2007 - mzugec@suse.de - fixed testsuite ------------------------------------------------------------------- Fri Jan 26 13:18:53 CET 2007 - kmachalkova@suse.cz - Use random hostname also during autoinstallation (if none found in install.inf or /etc/hosts)(#165269) - 2.15.10 ------------------------------------------------------------------- Tue Jan 16 11:40:06 CET 2007 - kmachalkova@suse.cz - Avoid displaying empty strings in internet test dialog (#220813, #223498) - 2.15.9 ------------------------------------------------------------------- Thu Jan 11 08:13:29 CET 2007 - mzugec@suse.cz - #150207 - disable sysconfig.displaymanager.KDE_USE_IPV6 when disabling ipv6 ------------------------------------------------------------------- Tue Jan 9 13:20:06 CET 2007 - mzugec@suse.cz - #116092 - network not set up because of pppoe - 2.15.8 ------------------------------------------------------------------- Tue Jan 9 11:32:47 CET 2007 - mzugec@suse.cz - 2.15.7 - fate #417 - interface without IP - fate #110040 - Support Bonding Network Device ------------------------------------------------------------------- Fri Jan 5 16:45:39 CET 2007 - mzugec@suse.cz - 2.15.6 - #166997 - install kinternet when needed ------------------------------------------------------------------- Thu Jan 4 16:31:58 CET 2007 - mzugec@suse.cz - 2.15.5 - #230967 - dial-on-demand button activates dns server entry fields ------------------------------------------------------------------- Thu Jan 4 16:16:56 CET 2007 - kmachalkova@suse.cz - Hostname and DHCP options help improvements (#195148) - Show 'Test proxy' related help text and disable the button only when needed (#226034) ------------------------------------------------------------------- Thu Jan 4 15:55:36 CET 2007 - mzugec@suse.cz - fix for rnc file ------------------------------------------------------------------- Thu Jan 4 13:53:59 CET 2007 - mzugec@suse.cz - 2.15.4 - fixed autoconfiguration ------------------------------------------------------------------- Thu Jan 4 11:19:26 CET 2007 - mzugec@suse.cz - 2.15.3 - fate #301032 - check if ip is already in use uses ------------------------------------------------------------------- Fri Dec 8 17:28:53 CET 2006 - mzugec@suse.cz - #116211 - use combobox for module drivers instead of textedit - 2.15.2 ------------------------------------------------------------------- Wed Dec 6 16:38:33 CET 2006 - mzugec@suse.cz - #226408 - Network card -> IPv6 configuration: cannot go back - 2.15.1 ------------------------------------------------------------------- Wed Dec 6 15:08:38 CET 2006 - mzugec@suse.cz - #224884 - avoid some unwished error message (brctl) - 2.15.0 ------------------------------------------------------------------- Wed Nov 29 10:50:02 CET 2006 - kmachalkova@suse.cz - Correct check for availability of wireless firmware packages (#223871) - 2.14.12 ------------------------------------------------------------------- Mon Nov 27 14:09:18 CET 2006 - kmachalkova@suse.cz - Do not attempt to configure wlan card requiring firmware before the firmware is installed (#221235) ------------------------------------------------------------------- Mon Nov 27 10:43:17 CET 2006 - mzugec@suse.cz - #223136 - don't modprobe blacklisted modules - 2.14.11 ------------------------------------------------------------------- Tue Nov 21 10:47:16 CET 2006 - kmachalkova@suse.cz - Adjusted proxy dialog layout in text mode (#221648) ------------------------------------------------------------------- Tue Nov 14 16:46:01 CET 2006 - kmachalkova@suse.cz - Added autoyast validation file for proxy module(#215251) - Display also https proxy URL in autoyast summary - 2.14.10 ------------------------------------------------------------------- Wed Nov 8 13:38:27 CET 2006 - mzugec@suse.cz - #217270 - incorrect summary when STARTMODE='off' is set ------------------------------------------------------------------- Tue Nov 7 17:04:09 CET 2006 - kmachalkova@suse.cz - At least one proxy URL must be set if proxy is enabled (#206676) - Do not show 'Test proxy settings' button in installation mode (#215991) - Check 'same proxy for all protocols' checkbox when needed - 2.14.9 ------------------------------------------------------------------- Mon Nov 6 10:41:17 CET 2006 - mzugec@suse.cz - #216074 - add nfsroot to STARTMODE items - 2.14.8 ------------------------------------------------------------------- Fri Nov 3 16:40:44 CET 2006 - mzugec@suse.cz - UI to disable writing hostname to /etc/hosts - 2.14.7 ------------------------------------------------------------------- Fri Nov 3 11:18:57 CET 2006 - mzugec@suse.cz - #198417 - say "setting up smpppd, kinternet" in Write() only when really starts - 2.14.6 ------------------------------------------------------------------- Fri Nov 3 09:32:05 CET 2006 - kmachalkova@suse.cz - Advise user to use Add-on CD for installing some wi-fi binary firmwares (#209413) ------------------------------------------------------------------- Tue Oct 24 19:20:17 CEST 2006 - mzugec@suse.cz - #300604 - UI to disable IPv6 (installation) - 2.14.5 ------------------------------------------------------------------- Mon Oct 23 16:34:38 CEST 2006 - mzugec@suse.cz - fate #100092 - command line support for netcards - 2.14.4 ------------------------------------------------------------------- Mon Oct 23 10:32:13 CEST 2006 - mzugec@suse.cz - fate #300604 - UI to disable IPv6 (improved and fixed) - 2.14.3 ------------------------------------------------------------------- Fri Oct 20 20:39:31 CEST 2006 - mzugec@suse.cz - fate #300628 - indicate when netcard is not present - 2.14.2 ------------------------------------------------------------------- Fri Oct 20 14:28:48 CEST 2006 - mzugec@suse.cz - #176804 - root on iscsi - 2.13.70 ------------------------------------------------------------------- Wed Oct 18 19:15:16 CEST 2006 - mzugec@suse.cz - fate #300604 - UI to disable IPv6 - 2.13.69 ------------------------------------------------------------------- Tue Oct 17 16:51:58 CEST 2006 - kmachalkova@suse.cz - Improved Internet Test Dialog (show more info about devices, disable Change Device button when not needed) (#208000) - 2.13.68 ------------------------------------------------------------------- Thu Oct 12 10:59:39 CEST 2006 - mvidner@suse.cz - Disabled conflicting definitions in host.rnc from last change. - 2.13.67 ------------------------------------------------------------------- Mon Sep 25 14:49:04 CEST 2006 - kmachalkova@suse.cz - Better autoyast XML validation for networking and host - Conversion function in Host::Import to handle older profiles (as more FQDNs for one IP is allowed since 2.13.65) - 2.13.66 ------------------------------------------------------------------- Wed Sep 20 13:55:10 CEST 2006 - kmachalkova@suse.cz - Network installation proposal: click on 'Network Mode' title opens ManagedDialog to select between NM and ifup (#203817) ------------------------------------------------------------------- Tue Sep 19 16:54:34 CEST 2006 - kmachalkova@suse.cz - Allow using more FQDNs for one IP in /etc/hosts editor (#152036) - Adjusted testsuite (Host.*) - 2.13.65 ------------------------------------------------------------------- Thu Sep 14 13:31:35 CEST 2006 - mzugec@suse.cz - 2.13.64 - fate #100092 - command line support in network module ------------------------------------------------------------------- Thu Sep 14 10:47:50 CEST 2006 - locilka@suse.cz - Improving the Internet Test Dialog (FATE #100294) ------------------------------------------------------------------- Fri Sep 8 15:00:59 CEST 2006 - kmachalkova@suse.cz - Added missing icon to Hostname installation dialog (#203816) ------------------------------------------------------------------- Wed Sep 6 16:18:43 CEST 2006 - kmachalkova@suse.cz - Allow using the same proxy URL for all protocols (#57919) - Updated proxy module help text (#181931) - 2.13.63 ------------------------------------------------------------------- Fri Sep 1 10:40:07 CEST 2006 - kmachalkova@suse.cz - Added line wrapping to checkbox label in dns.ycp (#166236) due to lack of space for languages such as french ------------------------------------------------------------------- Wed Aug 30 13:34:04 CEST 2006 - mzugec@suse.cz - fixed #73739 - don't use stadic default gw with dhcp ------------------------------------------------------------------- Fri Aug 25 10:43:26 CEST 2006 - mvidner@suse.cz - Allow editing despite having a Xen bridge in Autoyast mode (#196479). ------------------------------------------------------------------- Tue Aug 22 19:21:05 CEST 2006 - mvidner@suse.cz - Main dialogs: Disable the Back button when there is no going back (#54027). Rename Next to Finish when there is nowhere else to go (#182853). - 2.13.61 ------------------------------------------------------------------- Fri Aug 11 10:54:00 CEST 2006 - mvidner@suse.cz - Fixed typos in English. ------------------------------------------------------------------- Fri Aug 11 09:26:54 CEST 2006 - kmachalkova@suse.cz - Removed running SuSEconfig module "profiles" from Proxy.ycp, since it has been dropped and is no longer needed - Updated ProxyFinishPopup() text (#158564) - 2.13.60 ------------------------------------------------------------------- Tue Aug 1 11:18:32 CEST 2006 - mvidner@suse.cz - NetworkManager cannot do additional addresses, disable the dialog (#165059). - NetworkManager now respects DHCLIENT_MODIFY_RESOLV_CONF, enable the checkbox accordingly (#156830). - 2.13.59 ------------------------------------------------------------------- Tue Jul 18 17:15:34 CEST 2006 - mvidner@suse.cz - Better logging of the internet test (#192745). ------------------------------------------------------------------- Sun Jul 16 08:54:55 CEST 2006 - olh@suse.de - introduce a Linuxrc::display_ip and use it instead of Arch::s390 - 2.13.58 ------------------------------------------------------------------- Mon Jul 10 16:23:39 CEST 2006 - mvidner@suse.cz - After the installation, use the correct module for the card over which the installation was done (#186000). - Include also WiFi cards in the DSL PPPoE dialog (#186102). - 2.13.57 ------------------------------------------------------------------- Fri Jun 9 11:10:10 CEST 2006 - locilka@suse.cz - Identify the release notes downloaded during the internet test by the product name (#180581). - 2.13.56 ------------------------------------------------------------------- Thu Jun 8 15:06:41 CEST 2006 - mvidner@suse.cz - Do not report a duplicate IP address if the interface is not up (#182473). - After the internet test, set focus to Next (#105811). - 2.13.55 ------------------------------------------------------------------- Mon Jun 5 09:27:12 CEST 2006 - mvidner@suse.cz - Made the proxy settings fit to 24 lines (#181404). - 2.13.54 ------------------------------------------------------------------- Fri Jun 2 10:32:56 CEST 2006 - mvidner@suse.cz - Added a missing translation marker to the routing table (#179906). ------------------------------------------------------------------- Fri Jun 2 09:31:36 CEST 2006 - locilka@suse.cz - At least one release-notes downloaded results in the successful internet test (#181094). - 2.13.53 ------------------------------------------------------------------- Mon May 29 17:27:48 CEST 2006 - mvidner@suse.cz - Disable editing interfaces if we see a Xen bridge (#178848). - 2.13.52 ------------------------------------------------------------------- Mon May 22 13:43:42 CEST 2006 - mvidner@suse.cz - Set STARTMODE=nfsroot for proposed interface if on iSCSI root (#176804). - 2.13.51 ------------------------------------------------------------------- Fri May 19 15:21:54 CEST 2006 - mvidner@suse.cz - Tell NetworkManager when writing the dialup settings by calling rcnetwork reload (#162959). - 2.13.50 ------------------------------------------------------------------- Wed May 17 17:30:35 CEST 2006 - mvidner@suse.cz - For iucv, create static hwcfgs, like hwcfg-static-iucv-id-$ID (#176330). - 2.13.49 ------------------------------------------------------------------- Tue Apr 25 11:11:05 CEST 2006 - mvidner@suse.cz - Added an autoyast option to apply the network settings immediately so that suse_register or OES can use them (#128810, #168806). - 2.13.48 ------------------------------------------------------------------- Fri Apr 21 12:12:14 CEST 2006 - locilka@suse.cz - Added missing changes between 2.13.45 and 2.13.46 - 2.13.47 ------------------------------------------------------------------- Fri Apr 21 10:00:06 CEST 2006 - locilka@suse.cz - Prevent from installing older release notes during the internet test. It would fail with useless error message and confuse user. This change enhances behavior of #164388 and fixes (#167985). - 2.13.46 ------------------------------------------------------------------- Thu Apr 20 18:29:40 CEST 2006 - sreeves@suse.de - Fixes were made in gnome-menus so rolling back these redundant changes. ------------------------------------------------------------------- Wed Apr 19 17:39:51 CEST 2006 - sreeves@suse.de - Fix for 152681 - add "yast2 modem" and "yast2 dsl" to CC Fix for 152999 - add "yast2 lan" to CC ------------------------------------------------------------------- Wed Apr 12 13:23:40 CEST 2006 - mvidner@suse.cz - Enable ifplugd by default only on laptops (#164816). - 2.13.45 ------------------------------------------------------------------- Wed Apr 12 09:21:09 CEST 2006 - locilka@suse.cz - Prevent from downloading 'undefined' release notes (#165314). - 2.13.44 ------------------------------------------------------------------- Fri Apr 7 11:13:25 CEST 2006 - locilka@suse.cz - Adding more error messages into log when some bash command fails during the internet test (#162628). - Check the installed version of release-notes against the downloaded one during the internet test. Skip installation of release-notes in case of the same version (#164388). - 2.13.43 ------------------------------------------------------------------- Thu Apr 6 19:48:45 CEST 2006 - mvidner@suse.cz - Disable suse_register if the internet test fails (#164042). - Disable the back button in inst_hostname (jsuchome, #157125). - 2.13.42 ------------------------------------------------------------------- Mon Apr 3 16:55:10 CEST 2006 - mvidner@suse.cz - Fixed determining the installation network device by using the C locale properly (#116537c47). - 2.13.41 ------------------------------------------------------------------- Mon Apr 3 15:37:05 CEST 2006 - locilka@suse.cz - Fixing log viewer to be able to show more log files with the same label (such as Release Notes) (#162175). - 2.13.40 ------------------------------------------------------------------- Tue Mar 28 15:56:22 CEST 2006 - locilka@suse.cz - Every single fetching of release notes has its own log (#161251). - 2.13.39 ------------------------------------------------------------------- Fri Mar 24 16:46:02 CET 2006 - locilka@suse.cz - Merged proofread texts. ------------------------------------------------------------------- Fri Mar 24 15:10:33 CET 2006 - locilka@suse.cz - Download all release notes for all installed products (add-ons) during the internet test (#160563). - Inform user when checking or installing downloaded RPM fails (#160562). - 2.13.38 ------------------------------------------------------------------- Mon Mar 20 13:46:11 CET 2006 - mvidner@suse.cz - Do not always enable the firewall when adding a new interface (#152650). - Preserve route options when editing (#159359). - 2.13.37 ------------------------------------------------------------------- Mon Mar 13 13:08:09 CET 2006 - locilka@suse.cz - Partly fixing bug #157342, 'raw' is not known termtype using 'dumb' instead - 2.13.36 ------------------------------------------------------------------- Fri Mar 10 17:26:14 CET 2006 - mvidner@suse.cz - Instead of linux, use a randomized hostname like linux-09az (#157107). - 2.13.35 ------------------------------------------------------------------- Thu Mar 9 17:17:56 CET 2006 - mvidner@suse.cz - Take the default STARTMODE from the product control file, allowing not to have ifplugd get in the way on SLES (#156388). - Merged proofread texts. - Reapplied the changes between 2.13.29 and 2.13.31 (discarding 2.13.33) as they were unrelated to #156054. - 2.13.34 ------------------------------------------------------------------- Wed Mar 8 00:56:01 CET 2006 - jsrain@suse.de - reverted changes between 2.13.29 and 2.13.31 - 2.13.33 ------------------------------------------------------------------- Tue Mar 7 22:54:38 CET 2006 - jdsn@suse.de - added global variable for suse register - 2.13.32 ------------------------------------------------------------------- Tue Mar 7 14:37:48 CET 2006 - mvidner@suse.cz - Load network modules before determining the interface used for the installation source (#116537). - 2.13.31 ------------------------------------------------------------------- Thu Mar 2 11:29:17 CET 2006 - mvidner@suse.cz - Autoyast: use linuxrc data for routing, resolver and hostname if not specified in the profile (#153426, improving the #117484 fix). - 2.13.30 ------------------------------------------------------------------- Thu Mar 2 10:12:25 CET 2006 - visnov@suse.cz - don't check available updates in internet connection test - 2.13.29 ------------------------------------------------------------------- Wed Mar 1 10:39:01 CET 2006 - mvidner@suse.cz - If an interface is not assigned to a firewall zone, do not say the firewall is disabled (#154295). - Do not allow the USB speed to enter the provider file (#148893). ------------------------------------------------------------------- Tue Feb 28 11:43:18 CET 2006 - mvidner@suse.cz - Do not use the IP for the hostname (#152218). - 2.13.28 ------------------------------------------------------------------- Mon Feb 27 15:03:27 CET 2006 - mvidner@suse.cz - XenU: do not filter out the network device (#153235). - 2.13.27 ------------------------------------------------------------------- Thu Feb 23 18:10:28 CET 2006 - mvidner@suse.cz - Hwup all hwcfgs, not just the changed ones, so that we get back modules that were unloaded because of deconfigured devices but are still needed (#136298). - Autoyast: Allow matching by MAC, bus id and module for second and subsequent interfaces (#119592#c9), improved not to break when specifying two devices with the same module (#146965). - When switching from Layer 2 to Layer 3, LLADDR must be emptied (#151196). - 2.13.26 ------------------------------------------------------------------- Mon Feb 20 16:23:04 CET 2006 - mvidner@suse.cz - Using the DHCP hostname: hostname dialog proposes it on non-laptops network proposal must not override earlier user choice (#152029) function moved to Arch (#151813) - Changed the warning for the binary-only AVM driver (#151148). - 2.13.25 ------------------------------------------------------------------- Tue Feb 7 20:27:26 CET 2006 - mvidner@suse.cz - Don't disable important widgets if NetworkManager is enabled (#148485). - 2.13.24 ------------------------------------------------------------------- Tue Feb 7 17:35:18 CET 2006 - mvidner@suse.cz - Allow to configure the network cards even if NetworkManager is enabled (#148485). - Skip the internet test when there are no interfaces (#148005). - 2.13.23 ------------------------------------------------------------------- Mon Feb 6 14:12:08 CET 2006 - mvidner@suse.cz - Added ETHTOOL_OPTIONS (so far for autoyast only, uses also install.inf) (#145041). - Use Hostname instead of Machinename from install.inf (#144687) - 2.13.22 ------------------------------------------------------------------- Sun Feb 5 17:59:56 CET 2006 - mvidner@suse.cz - Hide the dialup firewall checkbox when there is no device yet (#146388). - Distinguish cached and full Lan::Read so that the dirty bit is not reset when reproposing because of NM change. #147270 - 2.13.21 ------------------------------------------------------------------- Wed Feb 1 17:42:54 CET 2006 - mvidner@suse.cz - Fixed the formfactor laptop detection. ------------------------------------------------------------------- Mon Jan 30 17:36:35 CET 2006 - mvidner@suse.cz - For NetworkManager, propose basic ifcfgs because of firewall. - Fixed editing of resolver settings for static setups (#146162). - Fixed changing the interface for the internet test if NM is used (#146167). - Use BuildRequires - 2.13.20 ------------------------------------------------------------------- Wed Jan 25 18:25:57 CET 2006 - mvidner@suse.cz - Use "formfactor" from .probe.system to detect a laptop (#145485). - Proposal: when NetworkManager is turned off, do not ask about it again when entering network card configuration. ------------------------------------------------------------------- Wed Jan 25 09:30:15 CET 2006 - visnov@suse.cz - Network Mode proposal client must have different id than Lan client - 2.13.19 ------------------------------------------------------------------- Tue Jan 24 16:39:31 CET 2006 - mvidner@suse.cz - Internet test: even after getting an address, sleep 5 (#145153c7). - 2.13.18 ------------------------------------------------------------------- Tue Jan 24 15:48:43 CET 2006 - mvidner@suse.cz - Internet test: another try at waiting for managed interfaces (#145153). - Prefer /etc/install.inf to /etc/HOSTNAME when determinining the hostname (#144687). - Install NetworkManager.rpm if needed. - Changed the values of WIRELESS_WPA_MODE and WIRELESS_EAP_AUTH (mostly just uppercased) (#145196). - Merged proofread messages. - 2.13.17 ------------------------------------------------------------------- Mon Jan 23 17:13:59 CET 2006 - mvidner@suse.cz - For NetworkManager, don't forget to write the network/config setting (#144139). - Added networkmanager_proposal to the network proposal. Now NM has a separate heading and comes first. - Fixed the standalone hostname and name server dialog which looked quite psychedelic lately. - 2.13.16 ------------------------------------------------------------------- Mon Jan 16 17:18:09 CET 2006 - mvidner@suse.cz - Use /etc/sysconfig/network/config:NETWORKMANAGER instead of rcnetworkmanager (#135595). - Sleep 15 seconds after telling NetworkManager to activate an interface for internet test. - Prefer the string product feature network/network_manager (always, laptop, never) over boolean network/network_manager_is_default. - Warn when configuring modems and NetworkManager is enabled. - Disabled entering the apostrophe to ESSID since the agent does not quote it (#118157). - Use a separate dialog for switching between NetworkManager and ifup. Format the NetworkManager part of the proposal like the firewall one. (#141025). - Internet test: fixed cancelling of device selection that got broken again (#143182). - 2.13.15 ------------------------------------------------------------------- Thu Jan 12 19:31:28 CET 2006 - mvidner@suse.cz - Added networking/managed for autoyast. - 2.13.14 ------------------------------------------------------------------- Thu Jan 12 15:52:52 CET 2006 - locilka@suse.cz - Fixed/Enhanced Remote Administration (#135605) If the installation is running in VNC, Remote Administration is enabled by default and a new xorg.conf is written by SaX2 because XServer configuration is disabled in the hardware proposal in this case. ------------------------------------------------------------------- Thu Jan 12 10:35:33 CET 2006 - mvidner@suse.cz - Fixed a typo in the device-activating dbus-send (#142782). ------------------------------------------------------------------- Tue Jan 10 16:49:42 CET 2006 - mvidner@suse.cz - Really write hostname in the new dialog (#142292). - Lan::GetDefaultsForHW (used by autoyast) works again. - 2.13.13 ------------------------------------------------------------------- Mon Jan 9 16:54:04 CET 2006 - mvidner@suse.cz - Fixed internet connection test with NetworkManager (#138507). - inst_hostname: Use the installation-style abort popup. - 2.13.12 ------------------------------------------------------------------- Thu Jan 5 16:39:09 CET 2006 - mvidner@suse.cz - SLES: Ask for the host name, before the root password dialog (#62165, F4126). - Replaced Require by Package. - Made the Internet connection test dialog fit to text console (#140950). - Replaced "host name" by "hostname" according to the style guide. - 2.13.11 ------------------------------------------------------------------- Mon Dec 19 17:36:16 CET 2005 - mvidner@suse.cz - Moved NetworkService from yast2-network.rpm to yast2.rpm so that the firewall proposal can use it (#139402). - Merged proofread texts (many changes: do not end summary lines with periods). - 2.13.10 ------------------------------------------------------------------- Thu Dec 15 18:14:40 CET 2005 - mvidner@suse.cz - Added the WPA EAP Details dialog, with EAP authentication method and PEAP version (F300381). - 2.13.9 ------------------------------------------------------------------- Tue Dec 13 10:29:33 CET 2005 - mvidner@suse.cz - Internet test: when cancelling changing of a device, nothing was selected (#138219, mzugec) - 2.13.8 ------------------------------------------------------------------- Mon Dec 12 16:13:09 CET 2005 - mvidner@suse.cz - Domain search: limit input to 6 domains, help with syntax (#138017). - Enhanced the WPA EAP dialog (F300381): added a mode switch, anonymous identity, client key and password. - 2.13.7 ------------------------------------------------------------------- Mon Dec 5 15:42:20 CET 2005 - mvidner@suse.cz - Added a global switch for NetworkManager. Either rcnetwork or rcnetworkmanager is run. STARTMODE=managed is not used. - 2.13.6 ------------------------------------------------------------------- Fri Dec 2 11:17:09 CET 2005 - mvidner@suse.cz - Address dialog: Fixed displaying the initial tab. Adjusted spacing to fit to 80x24. Prepared some widgets for interface renaming. ------------------------------------------------------------------- Wed Nov 23 18:22:33 CET 2005 - mvidner@suse.cz - Moved the NIC details dialog to a tab in the address dialog. - Allowed more than 3 search domains (#55012, F120075) in the resolver dialog by using a multi line edit instead of 3 text entries. Also fixed checking whether something has changed in the dialog. ------------------------------------------------------------------- Tue Nov 22 09:26:21 CET 2005 - mzugec@suse.cz - feature #100095 - select network interface for testing internet connection ------------------------------------------------------------------- Tue Nov 15 19:16:12 CET 2005 - mvidner@suse.cz - Rewrote AddressDialog to CWM (preparing to attack bug #44721). For the time being, the wizard sequencer interface is the same and the look almost the same. - 2.13.5 ------------------------------------------------------------------- Wed Nov 9 17:34:43 CET 2005 - mvidner@suse.cz - lan: Added ifcfg:STARTMODE=managed for NetworkManager. - 2.13.4 ------------------------------------------------------------------- Fri Oct 21 11:24:17 CEST 2005 - mvidner@suse.cz - Added a widget for hwcfg:LCS_LANCMD_TIMEOUT (#98958#c23, hare). - Use ifcfg:LLADDR instead of hwcfg:QETH_MACADDRESS for Layer 2 (#98958#c12, hare). - 2.13.3 ------------------------------------------------------------------- Thu Oct 13 10:47:47 CEST 2005 - mvidner@suse.cz - Merged messages proofread for SLES9 SP2. - 2.13.2 ------------------------------------------------------------------- Fri Oct 7 14:06:05 CEST 2005 - mvidner@suse.cz - Autoyast: support interface matching by vio bus id (#119592). - Autoyast: do not ignore networking/dns if networking/interfaces is empty (#117484). - Added a widget for Layer 2 MAC address (#98958, with hare). - Honor BrokenModules from install.inf (#97540). ------------------------------------------------------------------- Fri Sep 30 13:37:19 CEST 2005 - mvidner@suse.cz - Enabled DHCP on S/390s (#87336, with hare). - Emphasized that the host name is global (#91202). - Fixed disabling IPA takeover (#85438#c32). - Fixed setting QETH options to empty (#90454). - Changed the default MTU for LCS eth and tr to 1492 (#81815, #93798). - Added the possibility to turn on the Layer 2 option for qeth and hsi (hare, #84148, #85438#c32). - Fixed the configuration of ESCON and FICON (#82891). - When proposing LAN config (also in autoyast in some cases), use the module from install.inf, not the first one of several options (like tg3/bcm5700). #81533. - 2.13.1 ------------------------------------------------------------------- Mon Sep 26 13:17:26 CEST 2005 - mvidner@suse.cz - Make ifplugd the default startmode for NICs (#115448). - If a NIC is configured with no address, say so (#116092). - 2.13.0 ------------------------------------------------------------------- Fri Sep 09 12:06:54 CEST 2005 - arvin@suse.de - run SuSEconfig gdm after remote control changes (bug #115901) - 2.12.15 ------------------------------------------------------------------- Fri Sep 2 11:06:13 CEST 2005 - mvidner@suse.cz - Do not show ISDN controllers both as configured and unconfigured (#103073). - Fix acivating network after backing out and configuring again (#113101). - 2.12.14 ------------------------------------------------------------------- Wed Aug 31 12:51:37 CEST 2005 - locilka@suse.cz - Fixing bug #113223, Fetching release notes in the installation did not use PROXY settings. Testing proxy timed out after a very long time. - 2.12.13 ------------------------------------------------------------------- Sat Aug 27 16:04:02 CEST 2005 - mvidner@suse.cz - Fixed editing ISDN providers (#104122). - Network settings would not be written if the wifi link was used in the proposal (#113196). ------------------------------------------------------------------- Mon Aug 22 17:02:30 CEST 2005 - mvidner@suse.cz - Don't use rcnetwork reload if it is not running (#106040). - Don't stop network unnecessarily (Detection stuff, #106040). - 2.12.12 ------------------------------------------------------------------- Thu Aug 18 16:49:13 CEST 2005 - mvidner@suse.cz - More valid characters for proxy user name (#103841). ------------------------------------------------------------------- Wed Aug 17 18:15:35 CEST 2005 - mvidner@suse.cz - Enable firewall for newly added modems and DSLs (#66478). - 2.12.11 ------------------------------------------------------------------- Mon Aug 15 17:21:48 CEST 2005 - mvidner@suse.cz - Clear the static address if using DHCP (#104494). - Omit BROADCAST and NETWORK (#50955). - Enable the ISDN init script (#104590). - Merged proofread texts. - 2.12.10 ------------------------------------------------------------------- Thu Aug 11 16:28:11 CEST 2005 - mvidner@suse.cz - Added missing imports (check_ycp). ------------------------------------------------------------------- Tue Aug 9 20:08:15 CEST 2005 - mvidner@suse.cz - Made the proposal link to change WiFi work (F2103). - Again fixed selecting the wrong card to edit (#98852, #102945). - 2.12.9 ------------------------------------------------------------------- Fri Aug 5 13:02:57 CEST 2005 - mvidner@suse.cz - Unified the configured and unconfigured lists (F5630, with visnov). - 2.12.8 ------------------------------------------------------------------- Thu Aug 4 12:18:07 CEST 2005 - mvidner@suse.cz - Do not mix up the unconfigured cards (#98852). ------------------------------------------------------------------- Thu Jul 28 12:31:56 CEST 2005 - jsuchome@suse.cz - updated desktop files - merged proofread messages - 2.12.7 ------------------------------------------------------------------- Mon Jul 25 17:46:10 CEST 2005 - mvidner@suse.cz - Warn in the proposal about unencrypted WiFi, have a direct link to change it (unimplemented) (F2103). - 2.12.6 ------------------------------------------------------------------- Fri Jul 22 20:44:38 CEST 2005 - mvidner@suse.cz - Prefer WiFi for the proposal (F2103). - 2.12.5 ------------------------------------------------------------------- Fri Jul 22 12:07:40 CEST 2005 - mvidner@suse.cz - Added WPA-EAP configuration (F100140). - 2.12.4 ------------------------------------------------------------------- Mon Jul 18 13:34:13 CEST 2005 - mvidner@suse.cz - Removed an obsolete workaround for bug 65164. - 2.12.3 ------------------------------------------------------------------- Thu Jul 14 15:40:58 CEST 2005 - mvidner@suse.cz - Do not default to storing ISP passwords on disk (#59836). ------------------------------------------------------------------- Mon Jul 11 18:22:05 CEST 2005 - mvidner@suse.cz - Fixed aborting the network test during the installation (YOU and release notes) (visnov, #44552, F110072). ------------------------------------------------------------------- Mon Jul 11 17:25:01 CEST 2005 - mvidner@suse.cz - Added "Test Proxy Settings" functionality (locilka, #55861). - 2.12.2 ------------------------------------------------------------------- Thu Jun 23 12:08:59 CEST 2005 - mvidner@suse.cz - Fixed and beautified HTTPS_PROXY. ------------------------------------------------------------------- Wed Jun 22 08:46:14 CEST 2005 - visnov@suse.cz - HTTPS_PROXY support (#67357) - Proxy command line support ------------------------------------------------------------------- Fri Jun 10 14:42:04 CEST 2005 - mvidner@suse.cz - WiFi: allow setting the channel only in Master and Ad-hoc modes (#88530) ------------------------------------------------------------------- Wed Jun 1 15:27:01 CEST 2005 - mvidner@suse.cz - Do not load a NIC driver if one is already loaded (#59794#c31). - Use network module options supplied by user during boot (install.inf) when installing and proposing (#75720). - For force_static_ip, also change the default in the address dialog (#65524). - Properly enable/disable widgets and validate input in the DNS dialog (#28427, #63423). ------------------------------------------------------------------- Mon May 16 12:33:05 CEST 2005 - mvidner@suse.cz - Removed an obsolete Requires: yast2-firewall. - Added help text about the alias name format (#83766). ------------------------------------------------------------------- Mon May 2 13:17:38 CEST 2005 - locilka@suse.cz - Added Firewall support into the Remote Administration settings - Added full Command Line support for Remote Administration ------------------------------------------------------------------- Tue Apr 19 17:24:12 CEST 2005 - mvidner@suse.cz - Adapted to ProductFeatures changes - Do not use "default" as an identifier. - 2.12.1 ------------------------------------------------------------------- Fri Apr 1 10:45:14 CEST 2005 - mvidner@suse.cz - Fixed detection of WPA-PSK support (#74496). - Removed obsolete file for personal firewall. ------------------------------------------------------------------- Tue Mar 22 09:56:21 CET 2005 - mvidner@suse.cz - isdnctrl was moved to /sbin (#74096). - 2.11.32 ------------------------------------------------------------------- Tue Mar 22 09:16:34 CET 2005 - mvidner@suse.cz - ISDN proposal: full init before internet test (#74096). - Sleep before drdsl to avoid some race. - 2.11.31 ------------------------------------------------------------------- Tue Mar 22 08:28:31 CET 2005 - mvidner@suse.cz - Fritz!Card DSL: drdsl must not use the -n switch (#74205). - 2.11.30 ------------------------------------------------------------------- Sat Mar 19 16:36:14 CET 2005 - nashif@suse.de - DSL: Offer Point to Point Tunneling Protocol again (#73043) - V 2.11.29 ------------------------------------------------------------------- Fri Mar 18 23:23:59 CET 2005 - nashif@suse.de - Do not set empty UNIQUE when autoinstalling (#73922) ------------------------------------------------------------------- Fri Mar 18 15:22:06 CET 2005 - mvidner@suse.cz - DSL: do not offer Point to Point Tunneling Protocol, pptp.rpm was removed because we no longer have ppp_mppe.ko (#73043) - 2.11.27 ------------------------------------------------------------------- Thu Mar 17 13:01:46 CET 2005 - mvidner@suse.cz - Fixed autoinstallation by reintroducing uppercasing (#73595). - 2.11.26 ------------------------------------------------------------------- Mon Mar 14 17:14:50 CET 2005 - mvidner@suse.cz - Reload lwresd if resolv.conf changes (#72450). - Moved the single quote fix to NetworkDevices.ycp (#72164). - 2.11.25 ------------------------------------------------------------------- Fri Mar 11 16:25:44 CET 2005 - mvidner@suse.cz - Don't allow single quotes inside ifcfg-*:NAME (#72164). - Use NetworkDevices::ConcealSecrets not to log sensitive information (#65741). - Multiple autoinstallation fixes by means of a rewrite (nashif) * #65976 - autoyast does not write network configuration correctly. Use proposal method to setup network devices for autoyast and handle multiple interfaces correctly * #60716 - autoyast detects myrinet as ethX * #67405 - autoyast configures two interfaces * #65353 - ability to provide static network information for autoyast - Added WLAN channels 13 and 14 to the default list (#67150). - Enable user control of newly added WLAN cards (#63767). - 2.11.24 ------------------------------------------------------------------- Tue Mar 8 15:22:21 CET 2005 - kkeil@suse.de - use valid default IPs for ISDN and not 0.0.0.0 (#43169, #56181) - 2.11.23 ------------------------------------------------------------------- Thu Mar 3 18:30:22 CET 2005 - kkeil@suse.de - fix ISDN ISA card setup (#67129) - /etc/init.d/isdn stop --> /etc/init.d/isdn unload - 2.11.22 ------------------------------------------------------------------- Wed Mar 2 10:27:32 CET 2005 - locilka@suse.cz - Merged proofed texts - 2.11.21 ------------------------------------------------------------------- Thu Feb 24 14:37:16 CET 2005 - mvidner@suse.cz - Allow WEP keys of lengths that the card supports (#60011). - Adjusted to the actual wireless card features implementation in agent-probe (#65391). - 2.11.20 ------------------------------------------------------------------- Mon Feb 21 16:57:57 CET 2005 - mvidner@suse.cz - Improved the layout of the internet connection test dialog (F100294). - Confirm also detection of PPPoE DSL (Novell #66056). - Provider help texts now match the dialog (Novell #66001). - Set modified to false when resetting in autoyast. - 2.11.19 ------------------------------------------------------------------- Fri Feb 11 17:24:05 CET 2005 - mvidner@suse.cz - Fixed CLI handlers (wrong function signatures). - Propose network config also when there's ifcfg-usb (#50164). - Do not log provider data, they contain passwords (#50741). - Fixed selecting an ISDN card manually (#50725). - Do not propose a dynamic address if the product (OES) says force_static_ip (#50524). - Warn when selecting a device without a module (#29296). - 2.11.18 ------------------------------------------------------------------- Mon Feb 7 17:35:47 CET 2005 - mvidner@suse.cz - Merged proofread texts. - 2.11.17 ------------------------------------------------------------------- Fri Feb 4 17:32:35 CET 2005 - mvidner@suse.cz - Introduced ifcfg:NAME, user's name for the interface, initialized from the hardware description. No widget yet. - Added firewall zone selection to network card details dialog, jump to it if the interface is not in any zone. Add new network cards to the external zone if the firewall is already enabled (#47309, #50333). - For WLAN interfaces, wireless-tools.rpm is needed (#49880). - Help text fix: cannot correct network settings during an update (#50381). - 2.11.16 ------------------------------------------------------------------- Thu Jan 27 17:33:54 CET 2005 - mvidner@suse.cz - Use /etc/init.d/network reload (#31698). - hwdown and hwup changed devices (#44794). - Added SGI Gigabit Ethernet (#48973). - 2.11.15 ------------------------------------------------------------------- Thu Jan 27 14:32:53 CET 2005 - mvidner@suse.cz - Improved and unified labels and helps for STARTMODE (#50095). Canonicalized its values (on, boot, onboot -> auto). - 2.11.14 ------------------------------------------------------------------- Tue Jan 25 17:34:09 CET 2005 - mvidner@suse.cz - Use Progress::set also in clients. ------------------------------------------------------------------- Mon Jan 24 21:19:34 CET 2005 - nashif@suse.de - Fixed second argument used to skip client when going back in the workflow ------------------------------------------------------------------- Mon Jan 24 19:34:52 CET 2005 - nashif@suse.de - Hardcode argument of inst_netsetup, currently argument `up is not needed because the client does only `up and no `down anymore ------------------------------------------------------------------- Mon Jan 17 09:45:40 CET 2005 - mvidner@suse.cz - Added DSL card detection. - Recognize USB Host-to-Host link detected by hwinfo (#22739). - Moved common things from SelectHW to SelectHardware. ------------------------------------------------------------------- Fri Jan 14 13:04:50 CET 2005 - mvidner@suse.cz - Remove old data from /etc/hosts after having re-configured hostname or IP during installation (#49634). - UI for Wireless card feature enquiry. - Keep logs from internet connection test (#46285). - Fixed building with new devtools. - 2.11.11 ------------------------------------------------------------------- Wed Dec 22 11:27:38 CET 2004 - mvidner@suse.cz - Updated help for WLAN ESSID (#39458). - Warn when changing the interface type (#30890). - Describe valid host and domain names in error popups (#22802). - 2.11.10 ------------------------------------------------------------------- Wed Dec 15 17:27:36 CET 2004 - mvidner@suse.cz - fixed build - 2.11.9 ------------------------------------------------------------------- Wed Dec 15 15:11:51 CET 2004 - mvidner@suse.cz - Using new firewall code in yast2.rpm via SuSEFirewall4Network. - Using Progress::set - Resolver: if the search list is empty, prefill the domain (#49094). - 2.11.8 ------------------------------------------------------------------- Thu Dec 9 17:44:03 CET 2004 - mvidner@suse.cz - IPs for /etc/hosts: watch out for BOOTPROTO=dhcp and nonempty IPADDR (#49055). - No-proxy domains: improved help, add commas if missing (#48998). ------------------------------------------------------------------- Thu Dec 2 12:51:48 CET 2004 - locilka@suse.cz - Added module SuSEFirewall4Network for handling network interfaces in SuSEfirewall2 using SuSEFirewall module. ------------------------------------------------------------------- Fri Nov 12 17:54:10 CET 2004 - mvidner@suse.cz - Fixed deleting additional addresses via the specialized dialog (#48191). - Do not allow slashes ifcfg and hwcfg names (#46803). - Run kinternet with the --quiet option (#46828). - Install wpa_supplicant when a device uses WPA-PSK (#47809). - 2.11.7 ------------------------------------------------------------------- Wed Nov 10 10:51:52 CET 2004 - mvidner@suse.cz - Moved NetworkDevices from yast2-network to yast2. - 2.11.6 ------------------------------------------------------------------- Thu Nov 4 10:52:12 CET 2004 - mvidner@suse.cz - Fixed errors found by stricter type checking. - Replaced selects and lookups by brackets. - 2.11.5 ------------------------------------------------------------------- Wed Oct 27 15:38:09 CEST 2004 - mvidner@suse.cz - Actually assign to allow_administration in Remote::Read (#44684). - Changed label: IUCV "link name/partner" to "peer name" (#42789). - Added qeth options and IP takeover to qeth and hsi (hare, #41570). - Use new common strings from Label. - Adapted to changes in Mode. - 2.11.4 ------------------------------------------------------------------- Tue Oct 19 10:11:45 CEST 2004 - mvidner@suse.cz - Deleted an unused file that triggered a format string mismatch. - 2.11.3 ------------------------------------------------------------------- Thu Oct 14 14:01:45 CEST 2004 - jsrain@suse.cz - fixed testsuite - 2.11.2 ------------------------------------------------------------------- Mon Oct 11 16:25:46 CEST 2004 - jsrain@suse.cz - adapted to new Arch:: interface ------------------------------------------------------------------- Thu Oct 07 16:41:15 CEST 2004 - arvin@suse.de - protect special characters when displaying logs from Internet connection test (bug #46410) ------------------------------------------------------------------- Wed Oct 6 15:34:33 CEST 2004 - mvidner@suse.cz - Consider smpppd and kinternet also for ISDN interfaces (#46888), dialup does not matter, only USERCONTROL does (#44303). - 2.10.33 ------------------------------------------------------------------- Tue Oct 5 14:39:53 CEST 2004 - mvidner@suse.cz - Do not set FIREWALL (restart on connect) according to the External fw interface checkbox (#45935). - 2.10.32 ------------------------------------------------------------------- Tue Oct 5 10:41:12 CEST 2004 - mvidner@suse.cz - Do not assign 127.0.0.2 to localhost (#46715). - 2.10.31 ------------------------------------------------------------------- Mon Oct 4 16:52:13 CEST 2004 - mvidner@suse.cz - Moved the "cd /" workaround to yast2-network (#46055). - Do not change proxy settings in the proposal (#46635). - 2.10.30 ------------------------------------------------------------------- Thu Sep 30 13:43:59 CEST 2004 - mvidner@suse.cz - One more place to pass the required packages (#45960). - 2.10.29 ------------------------------------------------------------------- Wed Sep 29 14:30:23 CEST 2004 - mvidner@suse.cz - Don't display DHCP if the resolver is set up statically (#46377). - Don't use "ppp" as the firewall interface (#46378). - 2.10.28 ------------------------------------------------------------------- Wed Sep 29 10:52:33 CEST 2004 - arvin@suse.de - disable ugly hack of bug #42177 since 9.2 is a box product ------------------------------------------------------------------- Tue Sep 28 16:54:01 CEST 2004 - mvidner@suse.cz - Do not run dhcpcd-test, it may trigger IP address change (#46214). - 2.10.26 ------------------------------------------------------------------- Mon Sep 27 16:11:47 CEST 2004 - mvidner@suse.cz - Lan: install packages reported by hwinfo, eg. firmware (#45960). - Fixed firewall fix (#45857). - 2.10.25 ------------------------------------------------------------------- Sat Sep 25 12:43:17 CEST 2004 - mvidner@suse.cz - Removed inst_netsetup (`dn) and write resolv.conf directly. Network setup will be able to install packages from network and write the definitive configuration (#45317). - Check whether kinternet is installed (#43556). - Run it via a desktop file (#37864). - Use yast2-firewall to access the firewall configuration (#45857). - Edit the default wireless key, not the first one (#46029). - 2.10.24 ------------------------------------------------------------------- Fri Sep 24 14:01:23 CEST 2004 - mvidner@suse.cz - Don't require installation of generically named kernel packages (#44977). - Do not warn about no wireless key if we proceed with the key dialog (#46025). - 2.10.23 ------------------------------------------------------------------- Thu Sep 23 16:36:59 CEST 2004 - arvin@suse.de - set proxy for downloading of release notes (bug #35370) ------------------------------------------------------------------- Wed Sep 22 16:10:02 CEST 2004 - arvin@suse.de - check signature of release notes (bug #45647) ------------------------------------------------------------------- Mon Sep 20 16:38:00 CEST 2004 - kkeil@suse.de - do only install addon packages if proposal was accepted (#45314) - 2.10.20 ------------------------------------------------------------------- Mon Sep 20 16:19:58 CEST 2004 - mvidner@suse.cz - Do not write hwcfg for PC Cards (#42421). - lan_auto::Reset: clear modification flag - 2.10.19 ------------------------------------------------------------------- Fri Sep 17 13:00:01 CEST 2004 - mvidner@suse.cz - Do not (mis)configure WLAN cards automatically (#44951). - Do not falsely alarm about duplicate IPs if we have more interfaces (#45169). - 2.10.18 ------------------------------------------------------------------- Tue Sep 14 16:36:23 CEST 2004 - mvidner@suse.cz - Firewall for network interfaces: use FW_DEV_EXT instead of personal-firewall (#33649). ------------------------------------------------------------------- Mon Sep 13 15:44:18 CEST 2004 - mvidner@suse.cz - Added Lan::AutoPackages for autoinst mode (nashif). - Install RPMs with kernel modules (#44394). - 2.10.17 ------------------------------------------------------------------- Mon Sep 13 14:21:58 CEST 2004 - kkeil@suse.de - add ISDN:NetDeviceList() function for a list of configured ISDN network interfaces (#44677) - manual is the default STARTMODE for ISDN interfaces ------------------------------------------------------------------- Thu Sep 9 10:56:28 CEST 2004 - mvidner@suse.cz - Do not write the VNC settings until the whole proposal has been accepted (#44136). - LAN: STARTMODE="manual" if not specified but "auto" for new configurations (#44804). - Install ifplugd if needed (#44838). - There's no dhcp detection process to kill (#44557). - 2.10.16 ------------------------------------------------------------------- Mon Sep 6 17:29:58 CEST 2004 - mvidner@suse.cz - Added STARTMODE=ifplugd. - Prepare for installing kernel RPMs (#44394). - 2.10.15 ------------------------------------------------------------------- Fri Sep 3 14:48:06 CEST 2004 - mvidner@suse.cz - Renamed Virtual Aliases to Additional Addresses (#42412). - Deleted a redundant copy of DuplicateIP and fixed the other one (#9951). - Call hwup for hwcfg-static* instead of rccoldplug (#44626). - Don't write hwcfg files for bus-(pcmcia|usb) devices (#42421). - 2.10.14 ------------------------------------------------------------------- Thu Sep 2 16:54:07 CEST 2004 - msvec@suse.cz - write alias label and fixed alias editing (#42412) ------------------------------------------------------------------- Wed Sep 1 17:51:51 CEST 2004 - mvidner@suse.cz - Fixed configuring the dummy interface (#44582). - Another try at detecting KDE because of kinternet (#43556). ------------------------------------------------------------------- Tue Aug 31 00:44:07 CEST 2004 - nashif@suse.de - Fixed lan_auto to handle different devices (#44014) - use modified flag (#43904) in auto clients ------------------------------------------------------------------- Mon Aug 30 11:04:03 CEST 2004 - mvidner@suse.cz - Removed excess vertical spacing from LAN proposal (#44449). - Added periods to summary sentences (#44139). - 2.10.12 ------------------------------------------------------------------- Fri Aug 27 16:31:33 CEST 2004 - mvidner@suse.cz - Fixed telephone country code of Slovakia, added Czech Rep. and North America. (#44085) - Merged proofread texts. ------------------------------------------------------------------- Thu Aug 26 17:40:26 CEST 2004 - mvidner@suse.cz - Don't forget to write the WPA-PSK key (#44316). - Activate smpppd+kinternet for user controlled interfaces (#44303). - Restore interface configuration name when switching back from bus-{usb,pcmcia} (#38213) - 2.10.11 ------------------------------------------------------------------- Mon Aug 23 12:23:35 CEST 2004 - mvidner@suse.cz - Enable USERCONTROL for new modem, DSL and ISDN interfaces (#43945). - Dial Prefix Regex is enabled only for user controlled modems (#43945). - 2.10.10 ------------------------------------------------------------------- Thu Aug 19 09:58:06 CEST 2004 - mvidner@suse.cz - Wireless: better input checking, updated help texts. - 2.10.9 ------------------------------------------------------------------- Wed Aug 18 13:24:13 CEST 2004 - mvidner@suse.cz - Mark unplugged network cards in the list of unconfigured ones. - Fixed return type of LanSequence for CommandLine. - 2.10.8 ------------------------------------------------------------------- Tue Aug 17 15:02:09 CEST 2004 - mvidner@suse.cz - VNC: Using xorg-x11 instead of XFree86. - Fixed parallel build (nested directory symlinks). - 2.10.7 ------------------------------------------------------------------- Mon Aug 16 16:39:27 CEST 2004 - mvidner@suse.cz - Phone number checking relaxed from validchars to are-you-sure (#43723). - Added usb to CardRegex[netcard] (#43089). - 2.10.6 ------------------------------------------------------------------- Tue Aug 10 17:51:22 CEST 2004 - mvidner@suse.cz - VNC: Fixed status display and restarting xinetd, enhanced XDM warning (#43264) - Merged proofread texts. ------------------------------------------------------------------- Thu Aug 5 12:51:45 CEST 2004 - msvec@suse.cz - modem config files are now ifcfg-modem* - enabled preliminary Bluetooth support - minimal commandline support - improved summary output - 2.10.5 ------------------------------------------------------------------- Fri Jul 30 16:19:13 CEST 2004 - mvidner@suse.cz - Wireless: Added WPA-PSK. - LAN: Use editable combo instead of textentry for Configuration name (not filled with useful data yet). - Adjusted testsuite for removal of Mode::live_evil. - 2.10.4 ------------------------------------------------------------------- Thu Jul 29 16:44:09 CEST 2004 - mvidner@suse.cz - Added Dial prefix regular expression for modem ifcfgs (#23315). ------------------------------------------------------------------- Tue Jul 27 17:30:44 CEST 2004 - mvidner@suse.cz - New checkbox for interfaces: "User Controlled". - 2.10.3 ------------------------------------------------------------------- Fri Jul 23 18:27:51 CEST 2004 - mvidner@suse.cz - Moved the wireless dialog from the hardware one to after the address one (#42420). ------------------------------------------------------------------- Fri Jul 23 13:46:03 CEST 2004 - jsrain@suse.cz - added function to detect if host name (or IP address) is local host ------------------------------------------------------------------- Fri Jul 23 12:38:40 CEST 2004 - mvidner@suse.cz - Fixed configuration of s390 LCS devices (#42886). ------------------------------------------------------------------- Tue Jul 20 21:36:30 CEST 2004 - msvec@suse.cz - improved DNS and Routing summaries - duplicate IP address detection (#9951) - fixed coldplugged HW (#40587) ------------------------------------------------------------------- Wed Jul 14 13:00:02 CEST 2004 - mvidner@suse.cz - Shut up when there are no wlan files to fix (#42990). ------------------------------------------------------------------- Mon Jul 12 15:42:00 CEST 2004 - mvidner@suse.cz - For temporary network setup during installation (inst_netsetup), use also the domain name from install.inf (#42758). - Moved nsswitch.conf agent to yast2-pam. - 2.10.2 ------------------------------------------------------------------- Thu Jul 8 12:37:46 CEST 2004 - mvidner@suse.cz - Fixed deleting virtual aliases (#42386). - 2.10.1 ------------------------------------------------------------------- Thu Jul 8 08:47:23 CEST 2004 - mvidner@suse.cz - Added more "testedfiles" to test cases to make it work with the new testsuite. - 2.10.0 ------------------------------------------------------------------- Mon Jun 28 14:56:16 CEST 2004 - msvec@suse.cz - don't show writing progress (#42248) - use by-id naming for IUCV devices (#42212) - after update fix possibly wrong permissions (#24842) - updated s390 card list (hare) - 2.9.57 ------------------------------------------------------------------- Wed Jun 23 11:06:18 CEST 2004 - msvec@suse.cz - QETH devices detection changed (mvidner, #41461) - fixed setting host and domain name when Machinename has FQDN (#42242). - preliminary support for LCS devices (s390) - 2.9.56 ------------------------------------------------------------------- Fri Jun 18 15:41:02 CEST 2004 - mvidner@suse.cz - Correctly parse module and options to fix proposal when MAC addresses are unknown (#42203). - 2.9.55 ------------------------------------------------------------------- Fri Jun 18 11:32:51 CEST 2004 - arvin@suse.de - fake check for online patches (bug #42177) - 2.9.54 ------------------------------------------------------------------- Thu Jun 17 16:32:03 CEST 2004 - mvidner@suse.cz - Make the ifcfg file unreadable (chmod 600) if _any_ of the wireless keys is specified (#24842). - 2.9.53 ------------------------------------------------------------------- Wed Jun 16 17:51:29 CEST 2004 - mvidner@suse.cz - Fixed changing the host name during the installation after the network has already been set up (#42102). - 2.9.52 ------------------------------------------------------------------- Wed Jun 16 14:31:10 CEST 2004 - mvidner@suse.cz - Fixed an untranslated heading in ISDN setup (#42089). - 2.9.51 ------------------------------------------------------------------- Thu Jun 10 18:08:04 CEST 2004 - mvidner@suse.cz - VNC: Fixed hanging when starting KDM (#41611). - VNC: Tell the user if he must restart xdm (#40458). - 2.9.50 ------------------------------------------------------------------- Fri Jun 4 14:34:51 CEST 2004 - msvec@suse.cz - fixed coldplugged HW on s390 (#40587) - fixed QETH params writing (#41461) - fixed IUCV detection (#41525) - 2.9.49 ------------------------------------------------------------------- Fri May 28 12:20:15 CEST 2004 - mvidner@suse.cz - Require kdebase3 or fvwm2 instead of windowmanager to make VNC work (#40155). - 2.9.48 ------------------------------------------------------------------- Thu May 27 16:50:32 CEST 2004 - mvidner@suse.cz - Resolver: fixed restarting DHCP clients (#41303). - 2.9.47 ------------------------------------------------------------------- Thu May 27 06:19:13 CEST 2004 - nashif@suse.de - Fixed bug where autoyast config for network does not select correct interface (#41065) - Parse autoyast data correctly to show configured devices with ids (mac/pci bus) ------------------------------------------------------------------- Mon May 24 10:55:09 CEST 2004 - mvidner@suse.cz - Fixed /etc/inittab broken by last fix of VNC administration (#40458). - 2.9.46 ------------------------------------------------------------------- Fri May 21 02:43:12 CEST 2004 - nashif@suse.de - return right device name when cloning with autoyast. ------------------------------------------------------------------- Wed May 19 17:40:54 CEST 2004 - mvidner@suse.cz - Another fix of hwcfg-{hsi,qeth}-* (#40692#c15) - 2.9.45 ------------------------------------------------------------------- Tue May 18 15:01:31 CEST 2004 - msvec@suse.cz - proper CTC devices support (#40692) - show busid for s390 netcards (#40587) - fixed virtual aliases deleting (#40597) - don't use by-MAC identification on s390 (#38819) - network proposal by MAC (#40088, #40096) - improved remote administration (#40458) - 2.4.44 ------------------------------------------------------------------- Fri May 14 14:21:29 CEST 2004 - mvidner@suse.cz - fixed committing isdn providers (#39110) - 2.9.43 ------------------------------------------------------------------- Fri May 14 11:17:52 CEST 2004 - msvec@suse.cz - further s390 improvements (#39456) - 2.9.42 ------------------------------------------------------------------- Thu May 13 17:29:59 CEST 2004 - mvidner@suse.cz - fixed switching resolv.conf from DHCP to static config (#38834) - 2.9.41 ------------------------------------------------------------------- Thu May 13 15:45:51 CEST 2004 - mvidner@suse.cz - fixed saving empty WEP keys (#40431) - 2.9.40 ------------------------------------------------------------------- Wed May 12 15:09:15 CEST 2004 - msvec@suse.cz - added custom s390 dialogs (#39456) - preserve additional DNS searches (#40012) - make WLAN Master mode functional (#40431) - propose install.inf netcard if defined (#40088, #39130) - use bus_hwcfg hwinfo BUS identification field (#39456) - drop UML hardware detection hack, it works now (#39945) - save the 3rd modem init string (#40191) - drop obsolete s390 chandev stuff - 2.9.39 ------------------------------------------------------------------- Tue May 4 10:07:02 CEST 2004 - mvidner@suse.cz - merged proofread messages - 2.9.38 ------------------------------------------------------------------- Thu Apr 29 17:52:14 CEST 2004 - msvec@suse.cz - "detect" undetectable UML network device (#39521) - resurrected virtual aliases support (#39657) - updated list of hwinfo controllers (#39456) - fixed parallel build and updated testsuite - 2.9.37 ------------------------------------------------------------------- Tue Apr 27 13:32:49 CEST 2004 - mvidner@suse.cz - reduced operation modes to managed, ad-hoc and master - removed NWID and nickname (all #39458 c3) - 2.9.36 ------------------------------------------------------------------- Mon Apr 26 12:46:16 CEST 2004 - msvec@suse.cz - XPNet detection support (#35867) - 2.9.35 ------------------------------------------------------------------- Wed Apr 21 17:30:55 CEST 2004 - mvidner@suse.cz - Added comments to base modules ------------------------------------------------------------------- Mon Apr 19 16:58:21 CEST 2004 - mvidner@suse.cz - WEP: choose key type also in the main dialog (#35857 c19) fixed the Back button abbreviated Number as No. - 2.9.34 ------------------------------------------------------------------- Mon Apr 19 10:34:46 CEST 2004 - mvidner@suse.cz - added a dialog for multiple WEP keys (#35857) - proofread some more messages - inst_net_setup: ignore HWaddr if empty - export forgotten domain (#38770) - 2.9.33 ------------------------------------------------------------------- Wed Apr 07 12:07:57 CEST 2004 - arvin@suse.de - start capi during Internet test also for capi based dsl connections (bug #38540) ------------------------------------------------------------------- Tue Apr 6 11:04:01 CEST 2004 - msvec@suse.cz - use ifconfig -a to get interfaces (#38330) - fixed update of /etc/hosts (#38439) - 2.9.31 ------------------------------------------------------------------- Mon Apr 5 19:45:53 CEST 2004 - msvec@suse.cz - use BUSID when MAC=00:00:00:00:00:00 (partly #38392) - 2.9.30 ------------------------------------------------------------------- Mon Apr 5 19:27:05 CEST 2004 - msvec@suse.cz - fixed shortcuts in ISDN dialog (#38216) - 2.9.29 ------------------------------------------------------------------- Mon Apr 05 18:56:53 CEST 2004 - arvin@suse.de - don't setup and shutdown network if it has already been setup before yast is started (bug #38354) - 2.9.28 ------------------------------------------------------------------- Mon Apr 5 17:31:35 CEST 2004 - msvec@suse.cz - workaround bad german routing.desktop translation (#36936) - fixed syntax errors now reported by new core - 2.9.27 ------------------------------------------------------------------- Sun Apr 4 06:14:25 CEST 2004 - nashif@suse.de - create network config files using mac or pci ids when auto-installing (#37186) - fixed module parsing due to change in data structure in auto-install mode - 2.9.26 ------------------------------------------------------------------- Fri Apr 2 19:39:05 CEST 2004 - msvec@suse.cz - further smartlink-softmodems fixes (#37335) - changed license to GPL - 2.9.25 ------------------------------------------------------------------- Fri Apr 2 12:31:45 CEST 2004 - msvec@suse.cz - improved smartlink-softmodems support (#37335) - added more milestones to debug #38031 - 2.9.24 ------------------------------------------------------------------- Thu Apr 1 17:13:37 CEST 2004 - msvec@suse.cz - reintroduce unique key writing to map device to cfg - better naming for hotplug devices (#37666, #35225) - show shorter netcard name in overvew (#36147) - 2.9.23 ------------------------------------------------------------------- Wed Mar 31 17:55:02 CEST 2004 - msvec@suse.cz - dropped testing desktop entries (#37522) - fixed STARTMODE and MTU writing (#37516) - better smartlink-softmodems support (#37335) - replace type with netcard name in overview table (#36147) - fixed summary to properly show configured modems (#37744) - 2.9.22 ------------------------------------------------------------------- Mon Mar 29 17:11:33 CEST 2004 - msvec@suse.cz - fixed DSL configuration write (#36629) - device textentry now in address dialog (#36147) - fixed HW mapping for old-style ifcfg-files (#36910) - fixed missing translation (#37144) - 2.9.21 ------------------------------------------------------------------- Mon Mar 29 12:09:07 CEST 2004 - arvin@suse.de - implemented setup of nameserver during second stage of installation (bug #36957) - 2.9.20 ------------------------------------------------------------------- Fri Mar 26 12:29:25 CET 2004 - msvec@suse.cz - changed default hostname from linux.local -> linux.site (#36949) - 2.9.19 ------------------------------------------------------------------- Tue Mar 23 13:12:48 CET 2004 - mvidner@suse.cz - fixed enabling VNC administration (#31004, #36748) - 2.9.18 ------------------------------------------------------------------- Mon Mar 22 15:29:42 CET 2004 - msvec@suse.cz - preliminary XPNet devices support (#35867) - correct providers desktop entry (#36633) - never rmmod kernel modules (#36478) - further improve the naming (#36147) - possibility to change proposed names (#36147) - simplified summary output (#35647) - properly removed old hostname from /etc/hosts - 2.9.17 ------------------------------------------------------------------- Thu Mar 18 18:47:01 CET 2004 - arvin@suse.de - avoid flickering mouse cursor during Internet test (bug #36442) - 2.9.16 ------------------------------------------------------------------- Wed Mar 17 10:56:50 CET 2004 - msvec@suse.cz - added custom provider texts from msommer - 2.9.15 ------------------------------------------------------------------- Tue Mar 16 15:09:36 CET 2004 - msvec@suse.cz - offer possibility to change configuration name (#36147) - properly write hostname to /etc/hosts (#22825) - fixed kernel module selection - 2.9.14 ------------------------------------------------------------------- Tue Mar 16 12:35:26 CET 2004 - msvec@suse.cz - better device selection for installation (#35624) - 2.9.13 ------------------------------------------------------------------- Mon Mar 15 17:52:04 CET 2004 - msvec@suse.cz - use MAC address as a primary identification (#35731) - stop using UNIQUE numbers for ifcfg and hwcfg mapping - always use BUSID for HW configuration - write hostname to /etc/hosts (#22825) - dropped unused desktop entries (#35618) - proper focus in proxy (#35614) - fixed deleting of modem and DSL devices (#36079) - fixed testsuite - 2.9.12 ------------------------------------------------------------------- Wed Mar 10 11:07:35 CET 2004 - msvec@suse.cz - fixed modem and DSL packages names - 2.9.10 ------------------------------------------------------------------- Wed Mar 10 01:49:30 CET 2004 - sh@suse.de - Migration to new wizard - V 2.9.9 ------------------------------------------------------------------- Tue Mar 9 14:31:28 CET 2004 - msvec@suse.cz - added missing helps - minor fixes to WLAN configuration - 2.9.8 ------------------------------------------------------------------- Mon Mar 8 17:50:33 CET 2004 - msvec@suse.cz - use the new device naming (#33073) - set title icons - 2.9.7 ------------------------------------------------------------------- Fri Mar 5 13:07:34 CET 2004 - msvec@suse.cz - simple device interface (GetValue, SetValue) - possibility to set MTU (#34397, #20035) - possibility do change startmode (#24926) - don't always start smpppd and KInternet (#26382) - don't run KInternet in ncurses (#27891) - run KInternet according to the number of connections (#29475) - run|stop kinternet, if DISPLAY and (not)running (#14320) - don't allow to delete default provider (#17497) - install required packages in the installation proposals (#31536) - allow to delete proposed network cards (#34859) - drop resolv.conf header if not needed - correctly delete files on disk - fixed hosts writing (#35349) - added strict type casts - proof-read messages - 2.9.6 ------------------------------------------------------------------- Mon Feb 23 14:09:52 CET 2004 - msvec@suse.cz - reduced neededforbuild - fixed network proposal creation - fixed writing of kernel modules - resurrected virtual aliases support (#6627) - correct module name for Apple gmac (#34687) - sort now uses < because of the switch to std::sort - use Sequencer and Service modules - added wireless expert settings (#34873) - added more milestones - 2.9.5 ------------------------------------------------------------------- Mon Feb 16 19:21:25 CET 2004 - msvec@suse.cz - syntax fixes in the detection code - correct test for providers modification (#34419) - 2.9.4 ------------------------------------------------------------------- Tue Feb 10 08:41:53 CET 2004 - msvec@suse.cz - typo in shellcommand (may affect #29452, #33049) - 2.9.3 ------------------------------------------------------------------- Sat Feb 7 23:57:14 CET 2004 - msvec@suse.cz - ISDN compiles and seems to work - NVidia cards should be supported now (#25531) - 2.9.2 ------------------------------------------------------------------- Tue Jan 6 16:10:30 CET 2004 - msvec@suse.cz - sources restructured and cleaned up - new interpreter updates (ISDN not functional yet) - 2.9.1 ------------------------------------------------------------------- Tue Nov 11 17:11:54 CET 2003 - msvec@suse.cz - dummy device support (#15960) - preliminary USB Network support (#22739) - replace obsolete require calls (#31673) - allow to select a different card (#32450) - prefill "http://" in proxy fields (#31269) - don't allow to delete a provider which is used (#17497) - preliminary virtual aliases support (read|write and edit|delete so far) - allow "default" to be entered as a route destination (#21398) - fixed concurrent providers usage during installation (#31508) - fix netcard y2cc label (#33802) - automatic DNS support (#27955) - cleanup of redundant stuff - 2.9.0 ------------------------------------------------------------------- Tue Sep 23 15:47:33 CEST 2003 - msvec@suse.cz - ignore partially activated interfaces during Detection (#29452) - 2.8.43 ------------------------------------------------------------------- Mon Sep 22 09:50:11 CEST 2003 - msvec@suse.cz - install required packages for winmodems (#31443, #31471) - install all required packages after DSL configuration (#31536) - fixed starting of kinternet - updated testsuite - 2.8.42 ------------------------------------------------------------------- Sun Sep 21 22:03:22 CEST 2003 - kkeil@suse.de - fix start of kinternet,option must be --quiet not -quiet (#31322) ------------------------------------------------------------------- Sun Sep 21 19:03:06 CEST 2003 - arvin@suse.de - run 'rcnetwork start' before online test during update (bug #31466) ------------------------------------------------------------------- Sun Sep 21 15:42:34 CEST 2003 - msvec@suse.cz - fixed default baud rate value (#31442) - added more milestone calls to proposal clients - save the original providers for later comparison (#31322) - disable IPADDR prefilling (#31369) - 2.8.40 ------------------------------------------------------------------- Sun Sep 21 09:32:05 CEST 2003 - kkeil@suse.de - fix Firewall setting lookup (#31322) - if the interface was deleted, delete also the firewall entry ------------------------------------------------------------------- Thu Sep 18 11:40:00 CEST 2003 - arvin@suse.de - shut down temporary network before online test during update (bug #31030) ------------------------------------------------------------------- Wed Sep 17 10:07:39 CEST 2003 - arvin@suse.de - better helptext for vnc administration (bug #31085) ------------------------------------------------------------------- Tue Sep 16 13:07:00 CEST 2003 - msvec@suse.cz - don't detect unknown devices (#31022) - prefer cards with a driver during proposal (#30993) - make PCI modems known (#31022) - 2.8.36 ------------------------------------------------------------------- Mon Sep 15 18:06:56 CEST 2003 - adrian@suse.de - allow also remote root login in remote admin mode - 2.8.35 ------------------------------------------------------------------- Mon Sep 15 09:32:05 CEST 2003 - kkeil@suse.de - fix handling of BACK key, better default focus (#30104) - fix none translated driver descriptions (#30857) - 2.8.34 ------------------------------------------------------------------- Fri Sep 12 13:34:42 CEST 2003 - msvec@suse.cz - added more logging to simplify further bugfixing - 2.8.33 ------------------------------------------------------------------- Fri Sep 12 12:27:35 CEST 2003 - arvin@suse.de - fixed loading of modules for network setup during 2nd stage installation (bug #29945) - 2.8.32 ------------------------------------------------------------------- Wed Sep 10 18:00:14 CEST 2003 - msvec@suse.cz - fixed log erros possible affecting the detection (#30424) - 2.8.31 ------------------------------------------------------------------- Mon Sep 8 23:59:05 CEST 2003 - kkeil@suse.de - fix lost of firewall settings (#29103) - do not start smpppd and kinternet if no isdn interface was configured (#18831) - run drdsl if a new DSL-ISDN card was configured (#30294) ------------------------------------------------------------------- Mon Sep 8 23:19:44 CEST 2003 - msvec@suse.cz - hardware detection emulation for AVM DSL cards (#30294) - 2.8.30 ------------------------------------------------------------------- Mon Sep 8 17:17:06 CEST 2003 - msvec@suse.cz - skip nForce2 network cards, no driver available (#25531) - 2.8.29 ------------------------------------------------------------------- Mon Sep 8 12:27:30 CEST 2003 - msvec@suse.cz - drop restart of the pcmcia subsystem (#25604) - 2.8.28 ------------------------------------------------------------------- Fri Sep 5 18:03:19 CEST 2003 - msvec@suse.cz - added more milestone logging to the detection process - 2.8.27 ------------------------------------------------------------------- Fri Sep 5 09:17:58 CEST 2003 - msvec@suse.cz - proof read texts - 2.8.26 ------------------------------------------------------------------- Thu Sep 04 11:39:02 CEST 2003 - arvin@suse.de - fixed encoding of logs in internet test (bug #29500) ------------------------------------------------------------------- Thu Sep 4 10:21:23 CEST 2003 - msvec@suse.cz - use dhcpcd-test script for testing of DHCP (#29945) - changed DSL default for CZ to PPtP - fixed proxy help text (#29948) - fixed Myrinet subclass ID - 2.8.25 ------------------------------------------------------------------- Wed Sep 3 11:26:51 CEST 2003 - msvec@suse.de - fixed typo (#29905) - 2.8.23 ------------------------------------------------------------------- Tue Sep 2 16:09:49 CEST 2003 - msvec@suse.de - proxy url must contain the scheme identifier (#29754) - 2.8.22 ------------------------------------------------------------------- Tue Sep 02 14:36:21 CEST 2003 - arvin@suse.de - better text for vnc remote administration (bug #29717) ------------------------------------------------------------------- Tue Sep 2 07:11:45 CEST 2003 - nashif@suse.de - fixed testsuite - 2.8.21 ------------------------------------------------------------------- Tue Sep 2 00:31:31 CEST 2003 - nashif@suse.de - Fixed kernel module handling in normal and autoinst mode - Added Package function to auto client - 2.8.20 ------------------------------------------------------------------- Mon Sep 1 16:55:12 CEST 2003 - msvec@suse.cz - properly support detected wlan devices (#29506) - 2.8.19 ------------------------------------------------------------------- Sun Aug 31 14:57:34 CEST 2003 - arvin@suse.de - use Popup::ConfirmAbort ------------------------------------------------------------------- Sat Aug 30 22:47:56 CEST 2003 - arvin@suse.de - moved reactivation of network here (bug #29561) ------------------------------------------------------------------- Fri Aug 29 16:58:35 CEST 2003 - visnov@suse.de - CommandLine::Plain2Rich -> RichText::Plain2Rich ------------------------------------------------------------------- Thu Aug 28 15:35:34 CEST 2003 - msvec@suse.cz - don't shut down network interface during detection (#29452) - don't show error messages in case detection isn't started (#29582) - don't make modules.conf entries for hotpluggable hardware (#29547) - improve DSL detection message (#29576) - 2.8.18 ------------------------------------------------------------------- Wed Aug 27 16:38:05 CEST 2003 - msvec@suse.cz - confirm hardware detection in manual mode (#26515) - 2.8.15 ------------------------------------------------------------------- Mon Aug 25 15:10:14 CEST 2003 - kkeil@suse.de - new hardware dialog for ISDN based on CDB data - firewall has now 2 checkboxes ------------------------------------------------------------------- Thu Aug 21 11:00:14 CEST 2003 - msvec@suse.de - suppress error message if pcmcia is not installed (#29195) - propose empty lan config in case DSL pppoe is detected (#23662) - load modules before detection takes place (#24462) - fixed more pcmcia devices naming (#28314) - DSL PPTP support (#18407) - 2.8.13 ------------------------------------------------------------------- Wed Aug 20 16:28:43 CEST 2003 - jsuchome@suse.de - removed redundant "initialization dialog" (#28779) - 2.8.12 ------------------------------------------------------------------- Tue Aug 19 14:21:53 CEST 2003 - msvec@suse.cz - better WLAN help text (#28598) - 2.8.11 ------------------------------------------------------------------- Mon Aug 18 17:05:14 CEST 2003 - nashif@suse.de - Fixed dhcp configuration in autoinst mode - 2.8.9 ------------------------------------------------------------------- Tue Aug 12 20:43:53 CEST 2003 - arvin@suse.de - added remote administration proposal ------------------------------------------------------------------- Mon Aug 11 10:37:17 CEST 2003 - jsrain@suse.de - merged texts from proofread - 2.8.7 ------------------------------------------------------------------- Fri Aug 08 10:49:05 CEST 2003 - arvin@suse.de - variable handling of release notes url - added desktop files ------------------------------------------------------------------- Mon Aug 4 11:20:31 CEST 2003 - jsrain@suse.de - fixed testsuite ------------------------------------------------------------------- Mon Aug 04 11:06:12 CEST 2003 - arvin@suse.de - fixed return value in inst_netprobe ------------------------------------------------------------------- Fri Aug 2 12:49:15 CEST 2003 - msvec@suse.cz - read /root/.curlrc only if present - 2.8.10 ------------------------------------------------------------------- Fri Aug 1 12:49:15 CEST 2003 - msvec@suse.de - drop yast2-network-instsys package - added inst_netprobe installation client - don't expose password in plain text (#27459) - change wireless devices to wlan* (#28048) - basic more IPs support - 2.8.4 ------------------------------------------------------------------- Tue Jul 22 15:12:20 CEST 2003 - msvec@suse.cz - additional DHCP options dialog (improvement 31.2) - cleanup obsolete virtual aliases support - improved abort handling in routing setup - improved network config handling - preliminary more IPs support - 2.8.3 ------------------------------------------------------------------- Thu Jul 10 15:09:00 CEST 2003 - msvec@suse.de - proxy: better helps (#24803) - proxy: input checking (#18791) - lan: coordinate proposal with dsl (#17631) - add additional arcnet modules (#26858) - updated testsuite - 2.8.2 ------------------------------------------------------------------- Fri Jun 27 11:22:37 CEST 2003 - msvec@suse.de - fixed writing of modules.conf options (#26217) - check wireless key (#24839) - 2.8.1 ------------------------------------------------------------------- Thu Jun 26 10:00:50 CEST 2003 - msvec@suse.de - provider: recognize provider change in ncurses (#25432) - proxy: allow '\' in the username field (#27444) - lookup hostname during proposal (#21009) - sync help with widgets (#25106) - dns: restart only dhcp services - several updates and bugfixes - minimal dhcp detection - 2.8.0 ------------------------------------------------------------------- Thu Jun 12 16:09:06 CEST 2003 - arvin@suse.de - show several log files after internet test (bug #25057) - better interface of Internet module ------------------------------------------------------------------- Tue May 27 12:40:53 CEST 2003 - arvin@suse.de - handle no_you switch in content file ------------------------------------------------------------------- Wed Mar 19 13:13:25 CET 2003 - arvin@suse.de - reinitialize some values in Internet module ------------------------------------------------------------------- Fri Mar 14 15:30:05 CET 2003 - arvin@suse.de - preferable test dial up connection during internet test (bug #25264) ------------------------------------------------------------------- Fri Mar 14 13:40:29 CET 2003 - msvec@suse.de - change permissions of files containing wireless keys (#24842) - 2.7.34 ------------------------------------------------------------------- Thu Mar 13 13:20:03 CET 2003 - msvec@suse.de - allow to set autodetected NICs as WLAN (#25234) - 2.7.33 ------------------------------------------------------------------- Wed Mar 12 13:52:42 CET 2003 - msvec@suse.de - get around CallFunction scope problems (#25116) - 2.7.32 ------------------------------------------------------------------- Tue Mar 11 11:08:09 CET 2003 - msvec@suse.de - fixed reading of unknown devices (#24972) - reload smpppd after DSL config (#24663) - added pcmcia subsystem restart (#23935) - 2.7.31 ------------------------------------------------------------------- Mon Mar 10 17:42:31 CET 2003 - arvin@suse.de - better trigger for dial on demand connection during internet connection test - 2.7.30 ------------------------------------------------------------------- Fri Mar 7 15:04:39 CET 2003 - msvec@suse.de - restart smpppd after DSL and modem configuration (#24663) - change permissions of files containing wireless keys (#24842) - drop valid chars check of the wireless key (#24839) - updated testsuite - 2.7.29 ------------------------------------------------------------------- Thu Mar 06 12:15:17 CET 2003 - arvin@suse.de - better result in internet connection test (bug #24734) - avoid rocking progress labels during internet connection test - 2.7.28 ------------------------------------------------------------------- Wed Mar 5 12:46:08 CET 2003 - msvec@suse.de - updated kdesu kinternet call (#14320) - 2.7.27 ------------------------------------------------------------------- Tue Mar 04 21:35:11 CET 2003 - arvin@suse.de - fixed testsuite ------------------------------------------------------------------- Tue Mar 04 18:35:40 CET 2003 - arvin@suse.de - redesigned "Internet Connection Test" dialogue (bug #23775) ------------------------------------------------------------------- Mon Mar 3 17:08:14 CET 2003 - msvec@suse.de - proofread texts - better proxy proposal summary - default proxy proposal to disabled (#24277) - translated double clicks to edit (#23997) - don't read Routing in modem proposal (#24114) - offer USB and PCMCIA network cards in DSL configuration (#24056) - provide function for testing DSL devices (#24004) - 2.7.24 ------------------------------------------------------------------- Sat Mar 1 19:49:57 CET 2003 - nashif@suse.de - enable host and proxy configurations for autoyast ------------------------------------------------------------------- Fri Feb 28 13:44:16 CET 2003 - mvidner@suse.de - Fix writing /etc/sysconfig/network/routes in the network proposal (#24114). - 2.7.23 ------------------------------------------------------------------- Thu Feb 27 16:34:43 CET 2003 - arvin@suse.de - start isdn subsystem before isdn internet connection test ------------------------------------------------------------------- Thu Feb 27 15:34:32 CET 2003 - mvidner@suse.de - Sometimes package installation wrongly returned abort (#24316). - Don't select custom providers if there are none (#23994). - Fixed disabling the USB and PCMCIA checkboxes (#24332). - 2.7.21 ------------------------------------------------------------------- Thu Feb 27 11:39:15 CET 2003 - arvin@suse.de - fixed asking for provider password during internet connection test ------------------------------------------------------------------- Thu Feb 27 10:49:00 CET 2003 - kkeil@suse.de - fix FIREWALL handling in ISDN (#24089) ------------------------------------------------------------------- Wed Feb 26 16:19:34 CET 2003 - arvin@suse.de - fixed result field of internet test (bug #24354) ------------------------------------------------------------------- Mon Feb 24 17:36:27 CET 2003 - mvidner@suse.de - Added proxy to the network configuration proposal (#24204). - 2.7.18 ------------------------------------------------------------------- Mon Feb 24 14:38:07 CET 2003 - arvin@suse.de - only access widget with id s4 if it exists (bug #23800) ------------------------------------------------------------------- Fri Feb 21 15:20:06 CET 2003 - arvin@suse.de - better text for "abort installation" popup (bug #24019) ------------------------------------------------------------------- Fri Feb 21 11:42:56 CET 2003 - arvin@suse.de - better help text for network test (bug #23866) ------------------------------------------------------------------- Fri Feb 21 10:56:54 CET 2003 - arvin@suse.de - fixed Provider handling in Internet module (bug #23991) ------------------------------------------------------------------- Thu Feb 20 15:40:20 CET 2003 - arvin@suse.de - really download release notes ------------------------------------------------------------------- Wed Feb 19 19:30:43 CET 2003 - msvec@suse.de - changed proxy info popup text (#23728) - added missing host editor entry to Y2CC - surpress ProgressBar warning (#23796) - 2.7.12 ------------------------------------------------------------------- Mon Feb 17 18:59:54 CET 2003 - kkaempf@suse.de - dialogs.ycp:AskForPassword() must be global. ------------------------------------------------------------------- Mon Feb 17 18:02:00 CET 2003 - kkeil@suse.de - reenable isdn in provider dialog (#23725) ------------------------------------------------------------------- Mon Feb 17 14:40:49 CET 2003 - msvec@suse.de - don't read the lan devices in DSL proposal (#23569) - allow comma in phone number (#23678) - 2.7.9 ------------------------------------------------------------------- Fri Feb 14 12:30:53 CET 2003 - msvec@suse.de - fix homepage and hotline (#23600) - partially fix the status problem (#23593) - 2.7.8 ------------------------------------------------------------------- Tue Feb 11 17:25:32 CET 2003 - arvin@suse.de - fixed testsuite ------------------------------------------------------------------- Mon Feb 10 13:10:49 CET 2003 - msvec@suse.de - better hotplug devices support (#19478) - correct wlan kernel module names (#23491) - start cups server detection after write - installation bugfixes - proof read texts - 2.7.6 ------------------------------------------------------------------- Tue Feb 04 19:28:19 CET 2003 - arvin@suse.de - added missing inst_{ask,do}_net_test.ycp files ------------------------------------------------------------------- Mon Feb 3 16:40:45 CET 2003 - msvec@suse.cz - P2P tunneling protocol - ISDN: support for AVM T1B version - Capi-ADSL PPP mode - proofread texts - bugfixes - 2.7.4 ------------------------------------------------------------------- Tue Jan 28 12:44:15 CET 2003 - kkaempf@suse.de - fix testsuite - switch of progress in autoinstall read. - 2.7.3 ------------------------------------------------------------------- Mon Jan 27 14:34:16 CET 2003 - msvec@suse.de - new installation dialogs for internet connection - autoinst and other bug fixes - updated testsuite - 2.7.2 ------------------------------------------------------------------- Mon Jan 20 18:35:31 CET 2003 - msvec@suse.de - providers: quote variables (they are enclosed in 's) (#22776) - routing: fill in available devices (#21122) - other bugfixes - 2.7.1 ------------------------------------------------------------------- Wed Jan 8 14:54:45 CET 2003 - msvec@suse.de - dsl: o add/edit/delete (#15301, #17217, #19855) o enable to change the device start mode (#14315) o propose the network card config if none found - general: o new hosts manipulation and editor (#20970) o display info popup during proposal detection o new devices manipulation - hardware: o ARCnet support o FDDI support o preliminary MyriNet support (#21129) - lan: o editing of hardware settings (#15062, #10077, #12378) o remove kernel module after delete o warning if device number changed (#21288) o propose also if install.inf present but no hardware found o preliminary virtual aliases support (only edit|delete so far) - providers: o UI mode (#6244, #16291, #21499) o new providers handling (#17496, #18356) o correctly handle the providers with unknown type o correctly handle the nameservers requirement o check the name servers IP addresses - proxy: o display info popup at the end of configuration o use /root/.curlrc for storing proxy user and password (#21431) o added minimal input constraints (#18791) o allow to turn on|off with a checkbox - routing: o fixed crash (#21334) o minor GUI clenup and fixes - 2.7.0 ------------------------------------------------------------------- Mon Oct 21 11:35:40 CEST 2002 - msvec@suse.cz - fixed default gateway in the complex routing dialog (#21122) - 2.6.33 ------------------------------------------------------------------- Thu Oct 17 12:44:46 CEST 2002 - msvec@suse.cz - moved firewall checkbox to the isdn interface dialog (#18840) - 2.6.32 ------------------------------------------------------------------- Wed Oct 16 11:59:03 CEST 2002 - arvin@suse.de - the string returned from ip2hex has a fixed with of 8 now (bug #20936) ------------------------------------------------------------------- Mon Oct 14 11:29:04 CEST 2002 - msvec@suse.cz - really use the custom device number (#17346) - 2.6.30 ------------------------------------------------------------------- Wed Oct 9 11:49:20 CEST 2002 - msvec@suse.cz - setup network in the firewall setup (#18840) - 2.6.29 ------------------------------------------------------------------- Mon Oct 7 18:31:53 CEST 2002 - msvec@suse.cz - disable the s390 specific dialog - don't restart network after proxy configuration (#19615) - really enable the new proxy settings (#20179) - allow to choose custom network device (#17346) - fix firewall setup (#18840) - 2.6.28 ------------------------------------------------------------------- Fri Sep 13 15:20:35 CEST 2002 - arvin@suse.de - activate service network when saving isdn (bug #19625) - 2.6.27 ------------------------------------------------------------------- Mon Sep 9 17:18:21 CEST 2002 - msvec@suse.cz - chmod a+r /etc/resolv.conf (#19188) - the package is not noarch any more (#19206) - 2.6.26 ------------------------------------------------------------------- Thu Sep 5 15:06:00 CEST 2002 - kkeil@suse.de - write FIREWALL=[yes|no] for isdn (additional fix for #18840) - don't start smpppd/kinternet in save only mode (#18831) - set default STARTMODE for interface depending on STARTMODE of hardware - 2.6.25 ------------------------------------------------------------------- Wed Sep 4 12:10:30 CEST 2002 - msvec@suse.cz - write the correct ISDN device for the firewall (#18840) - regenerate profiles by SuSEconfig after proxy data change (#18791) - set up the network service also for modems and DSL (#18770) - added the s390 network devices types - 2.6.24 ------------------------------------------------------------------- Mon Sep 2 13:52:33 CEST 2002 - msvec@suse.cz - proxy example help text (#18721) - 2.6.23 ------------------------------------------------------------------- Thu Aug 29 17:10:52 CEST 2002 - msvec@suse.cz - fixed testsuite (new Installation.ycp constructor) - 2.6.22 ------------------------------------------------------------------- Tue Aug 27 15:18:23 CEST 2002 - msvec@suse.cz - provide/obsolete old translation packages - possibility to edit wireless settings (#9209) - 2.6.21 ------------------------------------------------------------------- Fri Aug 23 14:46:29 CEST 2002 - msvec@suse.cz - new screen for s390 hsi devices - prepare ISDN for the mail config question (#18256) - enable defaultroute editing again (#17498) - partial fix for the hostname problems (#17741) - preliminary support for s390 devices - updated testsuite - 2.6.20 ------------------------------------------------------------------- Tue Aug 20 17:01:06 CEST 2002 - jsuchome@suse.cz - updated dialogs's look (#17572) ------------------------------------------------------------------- Tue Aug 20 12:09:03 CEST 2002 - arvin@suse.de - don't stop/start network during writing of proposal on s390 ------------------------------------------------------------------- Mon Aug 19 17:46:07 CEST 2002 - kkeil@suse.de - display long provider name for isdn overview (#17564) - 2.6.18 ------------------------------------------------------------------- Mon Aug 19 16:46:07 CEST 2002 - kkeil@suse.de - check and install needed packages for isdn (#17615) ------------------------------------------------------------------- Mon Aug 19 14:07:47 CEST 2002 - mvidner@suse.cz - Now cardbus cards are detected, so use eth-pcmcia-0 and STARTMODE=hotplug (#13571). ------------------------------------------------------------------- Fri Aug 16 18:48:13 CEST 2002 - jsuchome@suse.cz - Providers: Added simple check for user name for T-Online provider (#16756, #6244) ------------------------------------------------------------------- Fri Aug 16 09:55:20 CEST 2002 - mvidner@suse.cz - DSL device: write a dummy ifcfg file (#17631). - DSL provider: allow switching between T-Online/other (kkeil). ------------------------------------------------------------------- Fri Aug 16 09:12:56 CEST 2002 - jsuchome@suse.cz - ISDN: Checked user input in "own phone number" (#16756). ------------------------------------------------------------------- Thu Aug 15 19:16:35 CEST 2002 - jsuchome@suse.cz - Corrected bug in writing modem configuration (check for providers change). ------------------------------------------------------------------- Thu Aug 15 11:53:35 CEST 2002 - mvidner@suse.cz - ISDN: saving interface/provider although not configured fixed (jsuchome). - Restrict valid characters for the wireless encryption key (#17546). - Disable DHCP related widgets when switching to static config (#17391). ------------------------------------------------------------------- Wed Aug 14 12:16:49 CEST 2002 - mvidner@suse.cz - Installation proposal: differentiate between static and dhcp network settings provided by linuxrc (#16471). - Exclude DSL, ISDN and modem control center entries on s390 and s390x (#17675). - Merged proofread texts for the second translation round. - 2.6.17 ------------------------------------------------------------------- Tue Aug 13 21:58:14 CEST 2002 - kkeil@suse.de - add support for Fritz!DSL - fix bug according regexpsub in DSLDevice module ------------------------------------------------------------------- Mon Aug 12 21:28:18 CEST 2002 - arvin@suse.de - fixed testsuite ------------------------------------------------------------------- Mon Aug 12 18:02:51 CEST 2002 - mvidner@suse.cz - Proxy: fix writing (#17623) - Routing: use a transparent icon (#16868). - 2.6.15 ------------------------------------------------------------------- Sun Aug 11 22:14:15 CEST 2002 - mvidner@suse.cz - Make "yast2 network" invoke "yast2 lan" (#17570). - Testsuite adapted to Runlevel changes due to #17608. ------------------------------------------------------------------- Fri Aug 9 00:11:13 EDT 2002 - nashif@suse.de - lower case of wireless/pcmcia options ------------------------------------------------------------------- Tue Aug 6 17:25:59 CEST 2002 - msvec@suse.cz - adapt proposal to the new install.inf agent - 2.6.13 ------------------------------------------------------------------- Tue Aug 06 10:41:41 CEST 2002 - arvin@suse.de - adapted testsuite to new /etc/install.inf agent ------------------------------------------------------------------- Mon Aug 5 11:49:16 CEST 2002 - msvec@suse.cz - install required packages for modem (#16863) and dsl (#14315) - fixed help texts - 2.6.11 ------------------------------------------------------------------- Mon Jul 29 17:57:19 CEST 2002 - msvec@suse.cz - remove deleted providers after Delete (#16094) - start kinternet after modem and isdn config (#14320) - fixed writing of additional providers (#17221) - possibility to enter infinite (0) idle timeout (#17218) - fixed caption, enabled defaultroute by default (#17219) - 2.6.10 ------------------------------------------------------------------- Wed Jul 24 20:07:14 CEST 2002 - kkeil@suse.de - ISDN interface and multi provider setup - simple dialin server setup - D-channel protocol selection depends on HW database - cleanups - 2.6.9 ------------------------------------------------------------------- Wed Jul 24 20:05:14 CEST 2002 - msvec@suse.cz - fixed some error messages - fix progress bar steps (#17180) - propose something only if there's nothing configured - 2.6.8 ------------------------------------------------------------------- Mon Jul 22 16:47:14 CEST 2002 - msvec@suse.cz - set up network in runlevels 2,3,5 (#17076) - write proxy user/pass to /root/.wgetrc (#17005) - fixed multiple proposals (#17016) - merged proofread texts - wireless help text - 2.6.7 ------------------------------------------------------------------- Mon Jul 15 18:21:14 CEST 2002 - msvec@suse.cz - proxy configuration - namespace hacks - 2.6.6 ------------------------------------------------------------------- Thu Jul 11 20:33:29 CEST 2002 - mvidner@suse.cz - general library: Added {check,valid}_address, valid_ip4. - 2.6.5 ------------------------------------------------------------------- Wed Jul 10 20:12:34 CEST 2002 - msvec@suse.cz - wireless network cards support (#9209) - run also SuSEconfigs for apache, sendmail and postfix (#16710) - remove netcard modules after delete (#16797) - correct IP details dialog - fixed providers filter - 2.6.4 ------------------------------------------------------------------- Thu Jul 04 20:48:09 CEST 2002 - arvin@suse.de - moved non binary files to /usr/share/YaST2 ------------------------------------------------------------------- Mon Jul 1 14:58:04 CEST 2002 - msvec@suse.cz - multiple providers support for modems - yast2-config-network -> yast2-network - netmask bits function and testsuite - new providers dialogs - added stupid mode checkbox (#16330) - IP6 checking - tell mail who is calling (#13565) - merged with yast2-lib-network - allow IP settings for ISDN rawip connections (#16309) - always write ifcfg- file entries with '' (#16549) - removed dependence on -trans package - network card proposal - updated testsuite - common connection dialog - default language heuristics - new modem and providers dialogs - use "rewrite" for providers files - always save providers with values enclosed in '' (#16069) - use config files - 2.6.2 ------------------------------------------------------------------- Wed May 15 20:30:32 CEST 2002 - msvec@suse.cz - added checking of error values to routing - fixed Abort confirmation in routing, dns (#14926) - IP forwarding support (#13053) - preliminary support for virtual network interfaces - allow * and & in Phone number, don't check pass emptiness (#16021) - ask for mail config after save (#13565) - enable DHCP checkboxes only in case of any DHCP device (#13223) - better modems summary and overview - prepared for the overall network config - properly fix substring lookup (#13735) - 2.6.1 ------------------------------------------------------------------- Wed Apr 17 09:22:51 CEST 2002 - msvec@suse.cz - updated testsuite due to #15694 - properly support externally modified resolv.conf - abort confirmation should work better cross modules (#14926) - agent for sysconfig/sysctl - added labels to DNS config (#13443) - allow setup of DHCP resolv.conf setting (#14792) - limit allowable characters in DNS dialog (#15653) - limit allowable characters in routing dialog - fixed checkycp complaints in ISDN config - use ycpdoc more-dirs mode - 2.6.0 ------------------------------------------------------------------- Tue Mar 26 00:45:36 CET 2002 - ro@suse.de - added yast2 to neededforbuild (modules/Mode.ycp) ------------------------------------------------------------------- Sat Mar 23 14:43:32 CET 2002 - kkeil@suse.de - fix empty custom provider problem (#15425) - 2.5.52 ------------------------------------------------------------------- Thu Mar 21 18:06:41 CET 2002 - kkeil@suse.de - don't load drivers in proposal mode (#15078) ------------------------------------------------------------------- Thu Mar 21 16:15:47 CET 2002 - mvidner@suse.cz - Added autoloading of a network card module for DSL. (if there is only one). #15182 - A "Finished" popup for DSL. (#15074) - 2.5.51 ------------------------------------------------------------------- Mon Mar 18 14:48:21 CET 2002 - mvidner@suse.cz - Providers::Commit should come before ISDN::Commit. Fixes #15079 (provider name empty in ifcfg-ippp0) - 2.5.50 ------------------------------------------------------------------- Mon Mar 18 13:30:56 CET 2002 - mvidner@suse.cz - Fixed writing of network card module options. (#15061) - 2.5.49 ------------------------------------------------------------------- Mon Mar 18 07:45:26 CET 2002 - pblahos@suse.cz - Providers: window with countries is disabled when custom providers are selected. (#15063) - 2.5.48 ------------------------------------------------------------------- Thu Mar 14 10:12:40 CET 2002 - msvec@suse.cz - minor documentation fixes - enhanced testsuite - 2.5.47 ------------------------------------------------------------------- Wed Mar 13 23:42:03 CET 2002 - kkeil@suse.de - don't reload driver, if only interface data was changed (#14865) - call Provider::Commit only if needed (#14145) - 2.5.46 ------------------------------------------------------------------- Wed Mar 13 14:54:14 CET 2002 - msvec@suse.cz - update /etc/hosts also if only the IP address changes (#14182) - added textdomain to menuentries for dns and routing - removed obsolete help text - 2.5.45 ------------------------------------------------------------------- Tue Mar 12 15:31:11 CET 2002 - msvec@suse.cz - better syntax for default gateway (#14878) - setup hostname before writing xauth info (#14530) - enhanced Firewall testsuite - 2.5.44 ------------------------------------------------------------------- Mon Mar 11 19:14:57 CET 2002 - msvec@suse.cz - return empty map on canceled autoinst (#14526) - 2.5.43 ------------------------------------------------------------------- Mon Mar 11 16:40:28 CET 2002 - kkeil@suse.de - fix to use LFS script path - called rcisdn twice (part of #14777) - allways use ComboBox for driver (#14665, #14772) ------------------------------------------------------------------- Mon Mar 11 13:39:57 CET 2002 - pblahos@suse.cz - It isn't necessary to specify a password when "Always ask me for a password" is set in ISDN provider setup (#14774) - 2.5.41 ------------------------------------------------------------------- Fri Mar 8 18:11:38 CET 2002 - kkeil@suse.de - start mode must allow hotplug for netif too (#13853) - smpppd should setup as last action - 2.5.40 ------------------------------------------------------------------- Fri Mar 8 18:01:08 CET 2002 - msvec@suse.cz - preserve /dev/modem symlink loops (#14577) - removed obsolete help texts and added missing (#14462) - 2.5.39 ------------------------------------------------------------------- Thu Mar 7 14:34:26 CET 2002 - pblahos@suse.cz - Check for Connection name uniqueness did not work (#14620) - When duplicate Provider name or Connection name was entered no error message was shown (#14618) - version 2.5.38 ------------------------------------------------------------------- Thu Mar 7 11:02:57 CET 2002 - kkeil@suse.de - fix allways write config bug (#14528) ------------------------------------------------------------------- Wed Mar 06 01:20:20 CET 2002 - kkeil@suse.de - fix Add/Edit/Delete disable/enable (#13899) - fix onboot/hotplug STARTMODE (#13853) - save provider related info (username and phone) only in provider file (#6169) - add Test carddriver (#2618) - add ask allways for password (#12413) - idle timeout in seconds, default=60 (#13222) - setup smpppd (#13172) - change finish to OK (part #13707) - USEPEERDNS and DEFAULTROUTE now enabled in default (#14177) - fix wrong matches for ppp if here are ippp devices - disable IP setting if dynamic IP is selected (#13218) - add warning if an binonly driver is selected - only legal ISA cards and parport devices have parameter - add more help text ------------------------------------------------------------------- Tue Mar 5 13:52:27 CET 2002 - lslezak@suse.cz - do not show ippp devices in modem configuration (#13735) - version 2.5.37 ------------------------------------------------------------------- Mon Mar 04 16:24:50 CET 2002 - arvin@suse.de - default for AUTODNS is "yes" for modems - providers configured for modem don't support isdn and vice versa (bug #14071) ------------------------------------------------------------------- Mon Mar 4 15:49:58 CET 2002 - mvidner@suse.cz - Fixed a race when writing /etc/resolv.conf (#13982) - 2.5.35 ------------------------------------------------------------------- Mon Mar 04 14:33:46 CET 2002 - arvin@suse.de - include STARTMODE in dsl config file (bug #14315) ------------------------------------------------------------------- Sun Mar 03 17:43:37 CET 2002 - arvin@suse.de - use correct provider name "dsl-provider0" in ifcfg-dsl0 ------------------------------------------------------------------- Sat Mar 2 12:45:06 CET 2002 - kkaempf@suse.de - Fix routing agent (#14184). - Enable edit/delete for a single entry also (kkeil@suse.de). ------------------------------------------------------------------- Fri Mar 1 17:53:00 CET 2002 - mvidner@suse.cz - Always save the DNS configuration so that /etc/hosts is saved even if only the IP address changes. (#14182) - Input validation in provider editing fixed. (#14209) - 2.5.31 ------------------------------------------------------------------- Wed Feb 27 16:25:02 CET 2002 - msvec@suse.cz - set DHCLIENT_SET_DOWN_LINK only for pcmcia cards - 2.5.30 ------------------------------------------------------------------- Mon Feb 25 19:45:37 CET 2002 - msvec@suse.cz - disable firewall checkbox is SuSEfirewall2 is active (#13639) - create /dev/modem symlink (#13764) - 2.5.29 ------------------------------------------------------------------- Mon Feb 25 17:32:35 CET 2002 - msvec@suse.cz - support of USB network cards (#13364) - added PCMCIA/USB ugly symlink hackery - ensuring that *SUPPORTED are present when writting (#13873) - better checking of values of variables ASKPASSWORD, STUPIDMODE, COMPUSERVE, ISDNSUPPORTED, DSLSUPPORTED, MODEMSUPPORTED - 2.5.28 ------------------------------------------------------------------- Mon Feb 25 15:58:52 CET 2002 - msvec@suse.cz - updated testsuite - proper PCMCIA support - don't require personal-firewall any more - don't show isdn cards in modem config (#13735) - checking that ASKPASSWORD, STUPIDMODE, COMPUSERVE, ISDNSUPPORTED, DSLSUPPORTED, MODEMSUPPORTED is yes or no - the option ASKPASSWORD must be yes or no - changes due to providers: provider file names changed from XX.wvdial.conf to XX.conf. - 2.5.27 ------------------------------------------------------------------- Wed Feb 20 17:48:01 CET 2002 - msvec@suse.cz - always allow hostname setting (#13427) - fixed dhcp hostname writing (#13642) - added support for personal firewall to DSL - changes due to new providers - added check for empty interface - enhanced firewall interface - 2.5.26 ------------------------------------------------------------------- Wed Feb 20 13:47:50 CET 2002 - msvec@suse.cz - added support for personal firewall to modems - use " as the default delimiter in sysconfig - fixed some network strings (#6646) - 2.5.25 ------------------------------------------------------------------- Tue Feb 19 16:23:26 CET 2002 - msvec@suse.cz - DSL: nice idle combo box - DSL: added check for empty user name - DSL: removed pppmode combo box for T-Online - DSL: default name servers for T-Online - DSL: updated texts (#13553) - 2.5.24 ------------------------------------------------------------------- Tue Feb 19 14:00:02 CET 2002 - msvec@suse.cz - fixed broken initial startup - fixed filtering of modem/isdn/dsl providers - merged Connection details screen to connection - set IDLE to 300 by default - 2.5.23 ------------------------------------------------------------------- Tue Feb 19 10:19:35 CET 2002 - msvec@suse.cz - DSL T-Online mode added - don't write DSL settings if nothing changed - 2.5.22 ------------------------------------------------------------------- Mon Feb 18 18:02:53 CET 2002 - msvec@suse.cz - removed checkIP builtins - BOOTMODE -> STARTMODE and updated testsuite - fixed modem speaker and carier writing - added filtering of providers that support modem/dsl (#13499) - files containing custom providers are now (0600, root, root) (#13353) - use yast2-db-country for getting nice name of country of provider (#13397) - proposals: no more two reads, reset and writing functional (#13410) - provides/obsoletes yast2-config-adsl - DSL configuration finished (#12971) - ISDN support by kkeil@suse.de - 2.5.21 ------------------------------------------------------------------- Fri Feb 15 21:53:23 CET 2002 - msvec@suse.cz - use yast2-db-country for the countries list - DSL configuration dialogs (#12971) - added pppoe and pppoatm switch - DSL preliminary write support - 2.5.20 ------------------------------------------------------------------- Fri Feb 15 17:16:21 CET 2002 - msvec@suse.cz - don't write dns and routing if not modified - support for PCMCIA network cards (#13362, #13365) - set boot mode of PCMCIA cards to "hotplug" (#13368) - add netcards list to the package (#13378) - 2.5.19 ------------------------------------------------------------------- Fri Feb 15 15:16:52 CET 2002 - msvec@suse.cz - some isdn dialogs fixes - more texts proof reading - 2.5.18 ------------------------------------------------------------------- Thu Feb 14 17:36:13 CET 2002 - msvec@suse.cz - don't start smpppd during installation (#13249) - don't write routing or DNS if it's not modified - check IP addresses, hostname and domains (#13201) - also check in routing and DNS config - added writing of .probe.status - delete modules.conf entries - closed a lot of bugs - 2.5.17 ------------------------------------------------------------------- Wed Feb 13 18:47:28 CET 2002 - msvec@suse.cz - ISDN configuration in progress - layout of the "Select providers" screen changed. - name of country for custom providers changed Other --> Custom - always saves (MODEM|ISDN|DSL)SUPPORTED - 2.5.16 ------------------------------------------------------------------- Tue Feb 12 17:57:06 CET 2002 - msvec@suse.cz - added proposals (only summary so far) - fixed format of custom providers and added missing fields - provider stuff removed from Modem module - added functions Export/Import into Providers - 2.5.15 ------------------------------------------------------------------- Mon Feb 11 14:29:38 CET 2002 - pblahos@suse.cz - implemented module Providers - don't set FQ hostname - 2.5.14 ------------------------------------------------------------------- Tue Feb 5 14:21:29 CET 2002 - msvec@suse.cz - fixed PPPD_OPTIONS writing - setup smpppd(8) - 2.5.13 ------------------------------------------------------------------- Fri Feb 1 16:22:06 CET 2002 - msvec@suse.cz - fixed CarrierDetect and SpeakerOn initstrings - some more minor modem fixes - 2.5.12 ------------------------------------------------------------------- Wed Jan 30 17:10:06 CET 2002 - msvec@suse.cz - added preliminary dsl dialogs - write detected PPPD_OPTIONS - AutoReconnect is not supported any more - removed some other obsolete settings - proof-read texts - 2.5.11 ------------------------------------------------------------------- Tue Jan 29 20:36:39 CET 2002 - msvec@suse.cz - reading progress for modems and isdn - modems writing and configuration partly done - 2.5.10 ------------------------------------------------------------------- Tue Jan 29 15:35:09 CET 2002 - msvec@suse.cz - network cards summary done - preliminary work for modems and isdn config - modems and isdn summary and overview screens - 2.5.9 ------------------------------------------------------------------- Mon Jan 28 17:49:15 EST 2002 - nashif@suse.de - Adapted for auto-installation - 2.5.8 ------------------------------------------------------------------- Mon Jan 28 16:21:12 CET 2002 - msvec@suse.cz - fixed default route writing - 2.5.7 ------------------------------------------------------------------- Fri Jan 25 17:27:43 CET 2002 - msvec@suse.cz - fixed modules initialization and cleanup (#12905) - fix writing of kernel modules for manually added cards - autoinstallation support for routing, dns, modems and isdn - ISDN configuration UI (no reading or writing) - fixed modem shortcuts - use Summary module - 2.5.6 ------------------------------------------------------------------- Thu Jan 24 13:38:33 CET 2002 - msvec@suse.cz - modems configuration UI - expect missing /etc/resolv.conf - preliminary lan autoinstallation support - 2.5.5 ------------------------------------------------------------------- Wed Jan 23 11:12:29 CET 2002 - msvec@suse.cz - writing modules.conf - preliminary summary clients - 2.5.4 ------------------------------------------------------------------- Wed Jan 16 20:41:36 CET 2002 - msvec@suse.cz - preliminary clients and for modem, ISDN and DSL - interaction of search and domain in resolv.conf - correct use of /etc/sysconfig/network/routes - added some help texts - 2.5.3 ------------------------------------------------------------------- Tue Jan 15 13:53:10 CET 2002 - msvec@suse.cz - DNS and routing clients - DNS writing somehow functional - use /etc/HOSTNAME for hostname - 2.5.2 ------------------------------------------------------------------- Mon Jan 14 18:54:07 CET 2002 - msvec@suse.cz - preliminary DNS dialog - routing configuration functional - use toupper, merge and remove builtins - preliminary version of modem and ISDN dialogs - added agents for routing and DNS - 2.5.1 ------------------------------------------------------------------- Wed Jan 9 17:27:09 CET 2002 - msvec@suse.cz - complete rewrite (almost no old code left) - updated network cards list from yast1 - supports new /etc/sysconfig scheme - only dialog layouts are similar - uses modules and devtools - new agents added - 2.5.0 ------------------------------------------------------------------- Tue Sep 25 10:45:39 CEST 2001 - dan@suse.cz - test for running i4l only if it exists (#11286) ------------------------------------------------------------------- Mon Sep 24 16:17:39 CEST 2001 - dan@suse.cz - start smpppd only if it exists (#11250) - fix adding providers for PCMCIA ------------------------------------------------------------------- Fri Sep 21 11:30:43 CEST 2001 - dan@suse.cz - add PollInput to avoid strange UserInput behavior also fixes (#11069) ------------------------------------------------------------------- Tue Sep 18 12:41:58 CEST 2001 - dan@suse.cz - start smpppd after starting ISDN (#10545) - enable to write 0.0.0.0 as default route (#10751) - 2.4.16 ------------------------------------------------------------------- Fri Sep 14 17:26:51 CEST 2001 - msvec@suse.cz - fixed shortcuts (#10401) - 2.4.14 ------------------------------------------------------------------- Fri Sep 14 13:43:10 CEST 2001 - dan@suse.cz - generate correct device numbers (#10580) - start smpppd after starting ISDN (#10545) - fix values from install.inf (#10628) - just one DNS is needed for modems (#10640) ------------------------------------------------------------------- Wed Sep 12 13:32:53 CEST 2001 - dan@suse.cz - adding providers for PCMCIA cards fix (#10116) - 2.4.12 ------------------------------------------------------------------- Tue Sep 11 11:42:44 CEST 2001 - dan@suse.cz - use LSB complainant return values - remember entered DNS values ------------------------------------------------------------------- Mon Sep 10 09:09:02 CEST 2001 - dan@suse.cz - fixed reading exiting configuration (also #10348) ------------------------------------------------------------------- Thu Sep 6 17:15:44 CEST 2001 - msvec@suse.cz - progress bar again functional - fixed some anyagent error messages - fixed route writing (maybe also #10123) - 2.4.9 ------------------------------------------------------------------- Wed Sep 5 18:21:50 CEST 2001 - msvec@suse.cz - fixed some CallFunction(lan_route) - fixed some other CallFunctions - fixed some untranslated messages - hopefully finally fixed the hostname settings (#10192) - more trailing whitespace removed - use :: in the dns configuration - 2.4.8 ------------------------------------------------------------------- Tue Sep 4 21:05:13 CEST 2001 - msvec@suse.cz - partial fix of duplicated variables (#9991) - fixed SCR variables (#10031) - fixed route writing (#10123) - removed some trailing whitespace - fixed some typos (#10034) - enabled parseycp check - fixed complex dialog - fixed hostname settings - 2.4.7 ------------------------------------------------------------------- Fri Aug 31 00:49:12 CEST 2001 - ro@suse.de - added to neededforbuild (for testsuite) ------------------------------------------------------------------- Wed Aug 22 11:22:08 CEST 2001 - dan@suse.cz - static DNS enabled for ISDN flow (also #6020) ------------------------------------------------------------------- Tue Aug 21 12:14:05 CEST 2001 - msvec@suse.cz - fixed netcards.ycp database - removed more obsolete builtins - fixed some minor bugs - 2.4.5 ------------------------------------------------------------------- Tue Aug 21 09:26:32 CEST 2001 - msvec@suse.cz - removed obsolete fileexist builtin - enabled abuild checking - 2.4.4 ------------------------------------------------------------------- Thu Aug 16 16:46:48 CEST 2001 - dan@suse.cz - adoption to the new probe format ------------------------------------------------------------------- Tue Aug 14 14:52:58 CEST 2001 - msvec@suse.cz - AddtoSecrets fixed (#9716) - AddtoSecrets testsuite - 2.4.2 ------------------------------------------------------------------- Fri Jul 27 11:38:36 CEST 2001 - dan@suse.cz - hostname change re-enabled on a running system ------------------------------------------------------------------- Fri Jul 20 14:42:10 CEST 2001 - dan@suse.cz - split of the nfs services, sendmail and nis configuration - removed superfluous first dialog of NFS client - version 2.4.0 - new libycp adoption - minor text changes ------------------------------------------------------------------- Tue Jul 10 01:35:40 CEST 2001 - ro@suse.de - removed yast2-core-translator from neededforbuild ------------------------------------------------------------------- Tue May 22 10:29:47 CEST 2001 - dan@suse.cz - removing search from resolv.conf fixed (#8578) ------------------------------------------------------------------- Tue May 15 18:14:39 CEST 2001 - dan@suse.cz - propagate installation parameter to set-up hostname during installation (#7964) - set-up /etc/HOSTNAME after reboot (#8344) - write MODEM variable into rc.config (#7895) ------------------------------------------------------------------- Tue May 15 13:52:36 CEST 2001 - kkaempf@suse.de - write "--module hostname" to /var/lib/YaST2/run_suseconfig to force hostname change propagation on next reboot. ------------------------------------------------------------------- Tue May 15 10:35:11 CEST 2001 - dan@suse.cz - write PCMCIA ISDN cards under NETCONFIG_PCMCIA instead of NETCONFIG in the rc.config file (bug #8069) - y2log cleanup (bug #8327) ------------------------------------------------------------------- Mon May 14 17:38:26 CEST 2001 - dan@suse.cz - do not write empty headers into '/etc/resolv.conf' (bug #8299) ------------------------------------------------------------------- Mon May 14 15:07:35 CEST 2001 - dan@suse.cz - write hostname for PCMCIA cards (bug #7964) - run full SuSE config during intsllation to set-up '/etc/HOSTNAME' (bug #8183) - DNS info writting fixed (bug #8256) ------------------------------------------------------------------- Fri May 11 15:53:21 CEST 2001 - dan@suse.cz - quote user and name in '/etc/ppp/ioptions.' - message in DNS popup fixed (#8071) ------------------------------------------------------------------- Fri May 11 12:47:57 CEST 2001 - dan@suse.cz - Inherits fixes for modem (#7968) - do not stop/start PCMCIA directly - message fixes for DNS dialog ------------------------------------------------------------------- Mon May 7 15:29:37 CEST 2001 - dan@suse.cz - manual setup flow fixed - allow to change hostname during installation (#7630) - writing of chap/pap secrets fixed (#7377) ------------------------------------------------------------------- Fri May 4 13:04:01 CEST 2001 - dan@suse.cz - reindexing isdn cards when reindexing - unique keys handeling unified ------------------------------------------------------------------- Mon Apr 30 17:46:37 CEST 2001 - dan@suse.cz - isdn subclass fixes ------------------------------------------------------------------- Fri Apr 27 15:40:26 CEST 2001 - dan@suse.cz - resolving fixes - multiple bugfixes in workflow ------------------------------------------------------------------- Tue Apr 24 15:26:20 CEST 2001 - dan@suse.cz - fixes for modem, isdn - ypclient fix - summary info fixes ------------------------------------------------------------------- Tue Apr 17 15:53:33 CEST 2001 - dan@suse.cz - summary added - isdn config files under /etc/ppp/providers - menuentries fixed - saving resolv.conf fixed ------------------------------------------------------------------- Tue Apr 17 15:33:45 CEST 2001 - kkaempf@suse.de - set "START_PORTMAP" to "yes" when configuring NFS server (#6270) ------------------------------------------------------------------- Thu Apr 12 14:51:11 CEST 2001 - dan@suse.cz - new resolving and hwprobe compliant - abort button allowed again ------------------------------------------------------------------- Thu Apr 5 10:59:31 CEST 2001 - msvec@suse.cz - translation package rename - documentation moved to $RPMNAME - enabled abuild checking - version 2.3.3 ------------------------------------------------------------------- Tue Apr 3 14:32:05 CEST 2001 - kukuk@suse.de - Remove ycpdoc from requires ------------------------------------------------------------------- Fri Mar 30 16:18:44 CEST 2001 - dan@suse.cz - alone function header removed ------------------------------------------------------------------- Fri Mar 30 15:32:24 CEST 2001 - dan@suse.cz - more new libycp addopting, using wizard library, - adopting to the new resolver agent ------------------------------------------------------------------- Tue Mar 27 19:55:36 CEST 2001 - dan@suse.cz - switch to the new libycp - package rename ------------------------------------------------------------------- Fri Jan 26 16:22:02 CET 2001 - msvec@suse.cz - translation fix (broken textdomains) #6166 ------------------------------------------------------------------- Fri Jan 26 12:57:05 CET 2001 - arvin@suse.de - use absolute path for rci4l scripts ------------------------------------------------------------------- Fri Jan 26 12:45:43 CET 2001 - dan@suse.de - temporal fix of rcnfsserver start call (bug #6157) ------------------------------------------------------------------- Fri Jan 26 09:47:45 CET 2001 - dan@suse.cz - ISDN default vaules fix (bug #6151) ------------------------------------------------------------------- Thu Jan 25 13:40:30 CET 2001 - dan@suse.cz - minor log fixes, added providers.ycp to enamble translation of ISP countries ------------------------------------------------------------------- Mon Jan 22 14:14:40 CET 2001 - dan@suse.cz - missing textdomain ------------------------------------------------------------------- Mon Jan 22 10:30:23 CET 2001 - dan@suse.cz - include missing ------------------------------------------------------------------- Fri Jan 19 16:13:44 CET 2001 - smid@suse.cz - bugfixes ------------------------------------------------------------------- Thu Jan 18 17:27:11 CET 2001 - dan@suse.cz - wait for dhclient up to 55 secs that should be enough. - don't start dhclient for pcmcia cards - always write "off" to pcmcia device ------------------------------------------------------------------- Wed Jan 17 15:13:23 CET 2001 - smid@suse.cz - bugfixes ------------------------------------------------------------------- Tue Jan 16 17:16:43 CET 2001 - dan@suse.cz - editing fixes ------------------------------------------------------------------- Tue Jan 16 08:55:17 CET 2001 - smid@suse.cz - many bugfixes ------------------------------------------------------------------- Mon Jan 15 19:20:17 CET 2001 - mike@suse.de - bug 5617 confusing names ------------------------------------------------------------------- Mon Jan 15 17:11:31 CET 2001 - dan@suse.cz - mostly button fixes, dhclient delay increased ------------------------------------------------------------------- Fri Jan 12 18:57:30 CET 2001 - kkaempf@suse.de - mark routing helptext as translatable ------------------------------------------------------------------- Fri Jan 12 10:13:50 CET 2001 - smid@suse.de - next button in route dialog fixed - forgotten debug dialog from isdn removed ------------------------------------------------------------------- Thu Jan 11 17:32:21 CET 2001 - dan@suse.de - pcmcia fixes, enabling dhclient to set hostname - personal firewall checkbox added ------------------------------------------------------------------- Thu Jan 11 00:44:07 CET 2001 - smid@suse.cz - bugfixes ------------------------------------------------------------------- Wed Jan 10 01:38:37 CET 2001 - smid@suse.cz - bugfixes (xauth, saving) ------------------------------------------------------------------- Tue Jan 9 23:27:13 CET 2001 - dan@suse.cz - new configuration workflow (another version :)) ------------------------------------------------------------------- Thu Jan 4 12:40:06 CET 2001 - dan@suse.cz - new configuration workflow ------------------------------------------------------------------- Tue Dec 19 18:57:56 CET 2000 - smid@suse.cz - added detection of init strings ------------------------------------------------------------------- Tue Dec 19 16:53:47 CET 2000 - dan@suse.cz - more bugfixes (#4833, #4737, #4838, #4815) ------------------------------------------------------------------- Mon Dec 18 14:26:14 CET 2000 - dan@suse.cz - more fixes (esp. checks), isdn saving fix (bugs #4738, #4751) ------------------------------------------------------------------- Fri Dec 15 16:25:22 CET 2000 - dan@suse.cz - fixes of bugs #4736, #4734, #4733, #4731 ------------------------------------------------------------------- Fri Dec 15 14:14:39 CET 2000 - dan@suse.cz - passing unique_keys fixed, y2t_lan required again ------------------------------------------------------------------- Fri Dec 15 13:24:31 CET 2000 - dan@suse.cz - restarting network just in the case of editing ethernet or token ring (bug #4677) ------------------------------------------------------------------- Fri Dec 15 10:55:41 CET 2000 - dan@suse.cz - PCMCIA fix (for manual), minor changes (default values ...) ------------------------------------------------------------------- Wed Dec 13 18:59:30 CET 2000 - mike@suse.de - new menuentry ------------------------------------------------------------------- Wed Dec 13 08:22:31 CET 2000 - dan@suse.cz - spec file fixed (missing database for manual selection) - xauth agent used for setting xauthority ------------------------------------------------------------------- Sun Dec 10 20:26:37 CET 2000 - dan@suse.cz - ypcliet script is ypbind now - debug dialog removed from sendmail config ------------------------------------------------------------------- Sun Dec 10 17:34:43 CET 2000 - dan@suse.cz - typo fixed ------------------------------------------------------------------- Sat Dec 9 14:07:36 CET 2000 - dan@suse.cz - Unknown provider label when provider is not recognized - fixed route saving - fixed modem list ------------------------------------------------------------------- Fri Dec 8 01:25:24 CET 2000 - kendy@suse.cz - Fixed saving of resolv.conf and route.conf - test_mode switched off in dialup - added textdomains for dialup modules - /sbin/init.d changed to /etc/init.d ------------------------------------------------------------------- Thu Dec 7 19:12:09 CET 2000 - kkaempf@suse.de - fix double qouted terms ------------------------------------------------------------------- Thu Dec 7 13:12:41 CET 2000 - kkaempf@suse.de - fix dhcp setup ------------------------------------------------------------------- Wed Dec 6 17:45:06 CET 2000 - kkaempf@suse.de - read default values from /etc/install.inf ------------------------------------------------------------------- Wed Dec 6 16:12:22 CET 2000 - kkaempf@suse.de - fix filelist in spec ------------------------------------------------------------------- Wed Dec 6 15:58:08 CET 2000 - kkaempf@suse.de - use bzip2 for packaging ------------------------------------------------------------------- Fri Dec 1 13:46:09 CET 2000 - dan@suse.cz - merge with dial, initial ------------------------------------------------------------------- Fri Oct 27 14:02:05 CEST 2000 - dan@suse.de - configuration of more devices enabled. ------------------------------------------------------------------- Mon Jul 24 15:16:01 MEST 2000 - dan@suse.de - added cheching for running NIS server (bugfix of #3422) and testing if /etc/route.conf exists (bugfix #3627) ------------------------------------------------------------------- Mon Jul 24 12:03:31 CEST 2000 - kkaempf@suse.de - fix ip address checking version 2.0.22 ------------------------------------------------------------------- Thu Jul 20 13:34:28 CEST 2000 - kkaempf@suse.de - dont check unwanted values version 2.0.21 ------------------------------------------------------------------- Thu Jul 13 13:36:40 CEST 2000 - kkaempf@suse.de - call ifconfig before rcdhclient version 2.0.20 ------------------------------------------------------------------- Thu Jul 13 09:27:10 MEST 2000 - dan@suse.de - minor dhcp changes (now accepts both dhclient and dhcpcd, longer delay) ------------------------------------------------------------------- Tue Jul 11 10:59:51 CEST 2000 - kkaempf@suse.de - bump version to 2.0.18 ------------------------------------------------------------------- Mon Jul 10 18:02:46 MEST 2000 - dan@suse.de - fixed dhcp configuration ------------------------------------------------------------------- Fri Jul 7 18:28:45 CEST 2000 - kkaempf@suse.de - fix modules.conf writing version 2.0.16 ------------------------------------------------------------------- Tue Jul 4 11:19:00 MEST 2000 - dan@suse.de - fixed cheching of running DHCP client ------------------------------------------------------------------- Mon Jul 3 16:52:17 MEST 2000 - dan@suse.de - added message for dhcp error ------------------------------------------------------------------- Fri Jun 30 11:39:19 MEST 2000 - dan@suse.de - Correct setting of hostname and domainname, bugfix (bug #2461) ------------------------------------------------------------------- Fri Jun 30 09:24:33 MEST 2000 - dan@suse.de - calling /bin/domainname to set correct domain name (bugfix, bug #3084) ------------------------------------------------------------------- Thu Jun 29 16:00:25 MEST 2000 - dan@suse.de - correction of calling split function ------------------------------------------------------------------- Thu Jun 29 15:20:40 MEST 2000 - dan@suse.de - fixed bug #3085, allow to enter more than one NIS servers (space separated) ------------------------------------------------------------------- Thu Jun 29 14:18:00 CEST 2000 - kkaempf@suse.de - put y2t_lan as Requires ------------------------------------------------------------------- Thu Jun 29 09:58:03 MEST 2000 - dan@suse.de - fixed smarthost bug (bug #3013) ------------------------------------------------------------------- Mon Jun 26 16:50:07 CEST 2000 - kkaempf@suse.de - messages fixes version 2.0.8 ------------------------------------------------------------------- Fri Jun 23 13:38:49 MEST 2000 - dan@suse.de - comment for translators ------------------------------------------------------------------- Thu Jun 22 13:24:35 MEST 2000 - dan@suse.de - correction of calling anyagents ------------------------------------------------------------------- Thu Jun 22 09:49:02 MEST 2000 - dan@suse.de - more message corrections ------------------------------------------------------------------- Wed Jun 21 08:55:45 MEST 2000 - dan@suse.de - messages corrections ------------------------------------------------------------------- Tue Jun 20 16:02:26 MEST 2000 - dan@suse.de - NFS problems (hopefully) fixed ------------------------------------------------------------------- Fri Jun 16 11:14:40 MEST 2000 - dan@suse.de - sendmail configuration, nfs configuration, bugfixes ------------------------------------------------------------------- Thu Jun 8 20:46:57 MEST 2000 - dan@suse.cz - ypclient added, kernel card support ------------------------------------------------------------------- Fri May 19 09:44:08 CEST 2000 - kkaempf@suse.de - initial version