forked from pool/python-esptool
Dirk Mueller
400bf423dd
- update to 3.3.1
* New Features
+ Added stub flasher support for ESP32-C2 ECO1, deprecated ECO0 stub (can still be used with ROM)
* espefuse.py
+ Added a new package - ESP32-D0WDR2-V3
* Bug Fixes
+ Fixed ESP32-S3 USB-OTG compressed flashing
- version 3.3
* New Features
+ Added flash size options up to 128MB. (#680)
+ Added stub flasher support for ESP32-C2.
+ Added --flash-mmu-page-size option to change flash MMU page size on ESP32-C2.
+ Added address and dummy cycles configuration to SPI flash commands, allowed reading flash SFDP registers.
+ Added target-specific flash frequency options.
* espsecure.py
+ Added support for ECDSA P192 and P256 signatures in Secure Boot V2.
+ Refined Secure Boot V2 ECC support.
+ Added support for XTS_AES_128 using 128 bit key FE scheme.
* espefuse.py
+ Added execute_scripts nesting support, a script can now be called from another script.
+ Added ESP32-C2 espefuse.py support.
+ Fixed power-out time for VDDQ settings for ESP32-S3.
+ Removed dysfunctional JTAG_SEL_ENABLE on ESP32-C3.
+ Removed unused eFuse fields on ESP32-C3 and ESP32-H2.
+ Added execute_scripts error handling in script files. (espressif/esp-idf#8420)
+ Added support for running multiple commands at once.
+ Added checks for secure download mode.
+ Added a recovery option to fix eFuse blocks after encoding errors.
* Internal features
These features are intended for use inside Espressif:
+ Preview support for ESP32-H2-beta2 has been added. This SoC is not generally available,
so it is unsupported in this release. Official support will be added in a later esptool.py release.
* Bug Fixes
+ Fixed autodetection on ESP32-S2 in USB-OTG mode. (#685)
+ Fixed flash.rodata not being recognized as part of IRAM in the ELF parser.
+ Fixed wrong UART_RXFIFO_CNT_M mask values in the stub flasher.
+ Added overerase detection and a fix sequence for certain XMC flash chips.
+ Allowed USB PID detection for USB-JTAG-Serial mode on lowercase port names.
+ Fixed chip autodetection to work in secure download mode.
+ Fixed wrong firmware image being returned for beta chips.
+ Fixed a wrong bootloader flashing offset on ESP32-S3. (#728)
* Miscellaneous Changes
+ Launched a new self-hosted esptool.py documentation and heavily updated its contents.
+ Renamed the ESP8684 target to ESP32-C2 (added alias for compatibility).
+ Added a warning for flash sizes that are not supported by the stub flasher.
- version 3.2
* New Features
+ Support for ESP32-S3 SoC has been added (removed ESP32-S3-beta3).
+ Added USB-JTAG-Serial and USB-CDC support for ESP32-S3.
+ Added a check to disable stub when connecting to an unsupported chip.
+ Added boot log detection and context of failures logging.
+ Improved error messages to cover more cases and provide more information.
+ Added get_security_info command stub support.
+ Augmented chip autodetection to work even in secure download mode. (ESP32-C3 and later only)
+ Added flash chip connection verification check.
+ Added ESP8266 version 3 image format support.
* espsecure.py
+ Added option for 512bit keys for encrypt_flash_data.
* espefuse.py
+ Added a new command which can execute custom python scripts to burn efuses all at once.
+ Added ESP32-S2 flash_ver, psram_ver, and pkg_ver efuses.
+ Corrected lenght of soft_dis_jtag efuse.
+ Added custom_mac eFuse field for ESP32-C3/-S2/-S3/-H2.
+ Added a check for read_protect_efuse. (#640)
+ Added support for 512bit XTS_AES flash encryption key.
+ Added a step to close the serial port after espefuse operations. (#671)
+ Added a security confirmation flag to espefuse tests. (#677)
* Internal features
These features are intended for use inside Espressif:
- Preview support for ESP32-H2 and ESP8684 has been added. These SoCs are not generally available,
so they are unsupported in this release. Official support will be added in a later esptool release.
- Added automatic delay for boot time after ESP32 reset in FPGA.
* Bug Fixes
+ Fixed build from sources (require wheel only when installing from pip). (#632)
+ Fixed failing flashing process on some supported chips. (#635)
+ Fixed ESP32-C3 package detection. (#638, #639)
+ Fixed test child processes being blocked waiting for the OS pipe buffer to accept more data. (#637)
+ Fixed MacOS USB PID detection on tty and cu ports.
+ Fixed erroneous comparison when handling deflated data. (#650)
* Miscellaneous Changes
+ Changed unnecessarily alarming error to a warning. (#631)
+ Removed ESP32 rev0 connection workaround.
+ Added a readable error and a use example to merge_bin.
- version 3.1
* New Features
+ Support for ESP32-C3 SoC has been added
+ Added --encrypt-files option to specify which files need encryption before flashing.
+ Added --use_segments option for elf2image to use segments instead of sections to generate the image. (#546)
+ Improved the write_flash timeout calculation and status message.
+ Support for detecting ESP8285 versions -N08, -N16, -H08, and -H16 has been added.
+ Added support for all write_reg command forms (including delay and mask parameters) to flasher stub.
+ Added merge_bin command to combine binary files on host (#254, #568)
+ Extended the --min-rev argument of elf2image to work on all chips apart from ESP8266.
+ Added diagnostic warnings about the memory regions needing to be erased during a flash write (#306)
+ Added --after no_reset_stub option to keep the flasher stub running and allow its repeated usage.
+ Added support for the USB-JTAG-Serial peripheral of ESP32-C3.
* espsecure.py
+ Added custom command-line argument to allow calling from other Python scripts.
+ Added --aes-xts option to encrypt/decrypt flash data files with AES-XTS algorithm on the S2 and C3.
+ Fixed handling of files to forbid empty output and re-writing input.
* espefuse.py
+ Added custom command-line argument to allow calling from other Python scripts.
+ Added security measures to prevent burning custom multicast MAC address. (#472)
+ Fixed errors when burning and read-protecting an efuse at the same time (#584)
+ Fixed burning of SPI pins configuration efuses (#216)
* Internal features
These features are intended for use inside Espressif:
- Support for ESP32-S3-beta3 & ESP32-C6-beta have been added. These SoCs are not generally available,
so they are unsupported in this release. Official support will be added in a later esptool release.
- Support for 32-bit addressing to enable 32/64MB flash memory chips on the S3.
* Bug Fixes
+ Fixed error outputs when installing from pip.
+ Increased the timeout for writing to flash to improve stability (#577, #533)
+ Fixed failing dump_mem overall bytes read message.
+ Allowed the write_mem mask argument to be optional to match with its usage example on Wiki.
+ Ensured expand_file_arguments gets called when using custom command-line arguments. (#400)
+ Fixed SecureBoot v2 public key extraction (#623)
* Miscellaneous Changes
+ Decomposed port detection logic.
+ Added flushing after each command before waiting for a reply.
+ Made it easier to use esptool.py as a component by permitting passing an already formed esp object to main() (#402)
+ Added function to merge adjacent sections in elf2image for the use case of linker scripts that have a large number of sections.
+ Decoupled esptool reset logic for easier monkey-patching (#508)
- version 3.0
* Breaking changes
+ The default esptool.py write_flash --flash_size argument has changed from detect to keep.
This means that if no --flash_size argument is passed when flashing a bootloader, the value
in the bootloader .bin file header is kept instead of detecting the actual flash size and
updating the header. To keep the old behaviour, add the argument esptool.py [...] write_flash [...] -fs detect
+ espefuse.py command line arguments for ESP32 have changed:
- BLK1, BLK2, BLK3 is now BLOCK1, BLOCK2, BLOCK3`
- The key usage secure_boot has been replaced with secure_boot_v1, secure_boot_v2.
Secure Boot V2 is the new RSA-based Secure Boot mechanism supported on ESP32 V3.
* New Features
+ Support for ESP32-S2 SoC has been added
+ Support for detecting ESP32-PICO-V3-02 and ESP32-U4WDH have been added
+ New --connect-attempts argument (#464)
+ Fixed scrolling problems when output is redirected (for example in Arduino IDE, see discussion at #482)
+ Produce a meaningful error if the SoC we connect to doesn't match the --chip argument
+ Support different capitalization and spelling for --chip argument (ie -c ESP32, -c esp32-s2, etc.
+ Added dedicated program esp_rfc_2217_server.py for flashing via RFC2217 (i.e. flashing over the network, #383)
* espsecure.py
+ Added support for Secure Boot V2 (ESP32 V3, ESP32-S2)
+ Secure Boot V1: PKCS8 formatted ECDSA keys are now supported via ecdsa library (not including password protected keys)
* espefuse.py
+ Added ESP32 ECO3 efuse UART_DOWNLOAD_DIS
+ Added new batch burn mode, support burning more than one eFuse on a single command line
+ espefuse.py internals have been refactored to support multiple chips, produce more information about
which eFuses are being written to which values.
+ "Virtual" mode added for host-based testing, allows updating eFuse values on a "virtual" chip inside the host.
* Internal features
+ These features are intended for use inside Espressif:
Support for ESP32-S3beta2 & ESP32-C3 have been added. These SoCs are not currently available
outside Espressif, so these SoCs are unsupported in this release. Official support will be
added in a later esptool release.
esptool.py --no-stub read_flash is now supported on ESP32 and later. This option
is slower than using the default stub option to read flash, so it's generally not useful for production SoCs.
* Bug Fixes
+ Added temporary workaround for a pyserial failure on macOS Big Sur Preview (#540)
+ Fixed gcc9 warning in the stub (#501)
+ Fixed some memory types printed in the memory map output
+ Fixed the check for zero bytes before applying an ELF SHA-256 with elf2image --elf-sha256-offset option (#560)
+ Fixed displaying some single core ESP32 features incorrectly, i.e. ESP32-S0WD
+ Fixed exception on Python 3 if the same flash address was repeated twice (#558)
* Miscellanous Changes
+ Updated miniz to v2.1.0 (#500)
+ Moved ESP32 stub loader location to facilitate loading large applications direct to IRAM
+ Vendored modules ecdsa, pyaes and optional pycrypto have been removed. Pyaes has been replaced
with the pyca-cryptography library
OBS-URL: https://build.opensuse.org/request/show/986388
OBS-URL: https://build.opensuse.org/package/show/devel:languages:python/python-esptool?expand=0&rev=14
102 lines
3.4 KiB
RPMSpec
102 lines
3.4 KiB
RPMSpec
#
|
|
# spec file for package python-esptool
|
|
#
|
|
# Copyright (c) 2022 SUSE LLC
|
|
#
|
|
# All modifications and additions to the file contributed by third parties
|
|
# remain the property of their copyright owners, unless otherwise agreed
|
|
# upon. The license for this file, and modifications and additions to the
|
|
# file, is the same license as for the pristine package itself (unless the
|
|
# license for the pristine package is not an Open Source License, in which
|
|
# case the license is the MIT License). An "Open Source License" is a
|
|
# license that conforms to the Open Source Definition (Version 1.9)
|
|
# published by the Open Source Initiative.
|
|
|
|
# Please submit bugfixes or comments via https://bugs.opensuse.org/
|
|
#
|
|
|
|
|
|
%{?!python_module:%define python_module() python-%{**} python3-%{**}}
|
|
%define skip_python2 1
|
|
Name: python-esptool
|
|
Version: 3.3.1
|
|
Release: 0
|
|
Summary: A serial utility to communicate & flash code to Espressif ESP8266 & ESP32 chips
|
|
License: GPL-2.0-or-later
|
|
Group: Development/Languages/Python
|
|
URL: https://github.com/espressif/esptool
|
|
Source: https://github.com/espressif/esptool/archive/v%{version}.tar.gz#/esptool-%{version}.tar.gz
|
|
BuildRequires: %{python_module bitstring >= 3.1.6}
|
|
BuildRequires: %{python_module ecdsa}
|
|
BuildRequires: %{python_module pyaes}
|
|
BuildRequires: %{python_module pyelftools}
|
|
BuildRequires: %{python_module pyserial >= 3.0}
|
|
BuildRequires: %{python_module pytest}
|
|
BuildRequires: %{python_module reedsolo >= 1.5.3}
|
|
BuildRequires: %{python_module setuptools}
|
|
%if 0%{?python_version_nodots} < 37
|
|
BuildRequires: %{python_module cryptography}
|
|
%endif
|
|
BuildRequires: fdupes
|
|
BuildRequires: openssl
|
|
BuildRequires: python-rpm-macros
|
|
Requires: python-ecdsa
|
|
Requires: python-pyaes
|
|
Requires: python-pyserial >= 3.0
|
|
Requires(post): update-alternatives
|
|
Requires(postun):update-alternatives
|
|
BuildArch: noarch
|
|
%python_subpackages
|
|
|
|
%description
|
|
A command line utility to communicate with the ROM bootloader in Espressif ESP8266 & ESP32 microcontrollers.
|
|
|
|
Allows flashing firmware, reading back firmware, querying chip parameters, etc.
|
|
|
|
%prep
|
|
%setup -q -n esptool-%{version}
|
|
sed -i '/^#!/d' flasher_stub/*.py
|
|
sed -i '/^#!/d' espressif/*.py
|
|
sed -i '/^#!/d' espressif/*/*.py
|
|
sed -i '/^#!/d' espressif/*/*/*.py
|
|
|
|
%build
|
|
%python_build
|
|
|
|
%install
|
|
%python_install
|
|
%python_clone -a %{buildroot}%{_bindir}/espefuse.py
|
|
%python_clone -a %{buildroot}%{_bindir}/espsecure.py
|
|
%python_clone -a %{buildroot}%{_bindir}/esptool.py
|
|
%python_expand sed -i '/^#!/d' %{buildroot}%{$python_sitelib}/*.py
|
|
%python_expand rm -rf %{buildroot}%{$python_sitelib}/__pycache__/*.pyc
|
|
%python_expand %fdupes %{buildroot}%{$python_sitelib}
|
|
|
|
%check
|
|
# there are more tests but upstream runs only those in .travis.yml
|
|
%pytest test/test_imagegen.py
|
|
# pytest test/test_espsecure.py
|
|
|
|
%post
|
|
%python_install_alternative espefuse.py
|
|
%python_install_alternative espsecure.py
|
|
%python_install_alternative esptool.py
|
|
|
|
%postun
|
|
%python_uninstall_alternative espefuse.py
|
|
%python_uninstall_alternative espsecure.py
|
|
%python_uninstall_alternative esptool.py
|
|
|
|
%files %{python_files}
|
|
%license LICENSE
|
|
%doc README.md
|
|
%{_bindir}/esptool.py-%{python_bin_suffix}
|
|
%{_bindir}/espsecure.py-%{python_bin_suffix}
|
|
%{_bindir}/espefuse.py-%{python_bin_suffix}
|
|
%python_alternative %{_bindir}/esptool.py
|
|
%python_alternative %{_bindir}/espsecure.py
|
|
%python_alternative %{_bindir}/espefuse.py
|
|
%{python_sitelib}/*
|
|
|
|
%changelog
|