forked from pool/argyllcms
- Add copyright header to specfile
- Clean specfile with spec-cleaner - Argyllcms is now mostly using AGPLv3, update License tag and use SPDX syntax. - Drop patch which was renaming scanner in documentation (not applied anyway). OBS-URL: https://build.opensuse.org/package/show/multimedia:color_management/argyllcms?expand=0&rev=3
This commit is contained in:
Git OBS Bridge
parent
f11cb78a3d
commit
c238f42674
@ -1,662 +0,0 @@
|
||||
diff -uNr Argyll_V1.0.1.orig/doc/ArgyllDoc.html Argyll_V1.0.1/doc/ArgyllDoc.html
|
||||
--- Argyll_V1.0.1.orig/doc/ArgyllDoc.html 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/doc/ArgyllDoc.html 2008-07-27 11:39:29.000000000 +0200
|
||||
@@ -18,7 +18,7 @@
|
||||
Author: Graeme Gill
|
||||
<h2><u>Introduction</u></h2>
|
||||
Argyll is an open source, ICC compatible color management
|
||||
-system. It supports accurate ICC profile creation for scanners, CMYK
|
||||
+system. It supports accurate ICC profile creation for acquisition devices, CMYK
|
||||
printers,
|
||||
film recorders and calibration and profiling of displays.
|
||||
Spectral sample data is supported,
|
||||
diff -uNr Argyll_V1.0.1.orig/doc/chartread.html Argyll_V1.0.1/doc/chartread.html
|
||||
--- Argyll_V1.0.1.orig/doc/chartread.html 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/doc/chartread.html 2008-07-27 11:40:27.000000000 +0200
|
||||
@@ -206,7 +206,7 @@
|
||||
<br>
|
||||
<a name="a"></a> Normally the patch locations are not needed in the
|
||||
output, but if a chart is being read as an input reference (for use in
|
||||
-profiling a scanner or a camera), then the patch locations will still
|
||||
+profiling an acquisition device), then the patch locations will still
|
||||
be needed. The <span style="font-weight: bold;">-a</span> flag adds
|
||||
the locations to the output .ti3 file.<br>
|
||||
<br>
|
||||
diff -uNr Argyll_V1.0.1.orig/doc/colprof.html Argyll_V1.0.1/doc/colprof.html
|
||||
--- Argyll_V1.0.1.orig/doc/colprof.html 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/doc/colprof.html 2008-07-27 11:41:01.000000000 +0200
|
||||
@@ -617,8 +617,8 @@
|
||||
absolute value, and any values whiter than that, will not be clipped by
|
||||
the profile. The profile effectively operates in an absolute intent
|
||||
mode, irrespective of what intent is selected when it is used.
|
||||
-This flag can be useful when an input profile is needed for using a
|
||||
-scanner as a "poor mans" colorimeter, or if the white point of the test
|
||||
+This flag can be useful when an input profile is needed for using an
|
||||
+acquisition device as a "poor mans" colorimeter, or if the white point of the test
|
||||
chart doesn't represent the white points of media
|
||||
that will be used in practice, and that white point adjustment will be
|
||||
done individually in some downstream application.<br>
|
||||
diff -uNr Argyll_V1.0.1.orig/doc/Installing_Linux.html Argyll_V1.0.1/doc/Installing_Linux.html
|
||||
--- Argyll_V1.0.1.orig/doc/Installing_Linux.html 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/doc/Installing_Linux.html 2008-07-27 11:42:29.000000000 +0200
|
||||
@@ -30,7 +30,7 @@
|
||||
variable to give access to the executables from your command line
|
||||
environment.
|
||||
The .tgz file also contains several useful reference files (such as
|
||||
-scanner
|
||||
+acquisition device
|
||||
chart recognition templates, sample illumination spectrum etc.) in the
|
||||
ref sub-directory, as
|
||||
well
|
||||
diff -uNr Argyll_V1.0.1.orig/doc/Installing_MSWindows.html Argyll_V1.0.1/doc/Installing_MSWindows.html
|
||||
--- Argyll_V1.0.1.orig/doc/Installing_MSWindows.html 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/doc/Installing_MSWindows.html 2008-07-27 11:42:50.000000000 +0200
|
||||
@@ -69,7 +69,7 @@
|
||||
<br>
|
||||
The .zip file also contains several useful reference files
|
||||
(such as
|
||||
-scanner
|
||||
+acquisition device
|
||||
chart recognition templates, sample illumination spectrum etc.) in the
|
||||
ref sub-directory, all the current documentation in a doc
|
||||
sub-directory, and instrument USB drivers in the libusbw directory.<br>
|
||||
diff -uNr Argyll_V1.0.1.orig/doc/Installing_OSX.html Argyll_V1.0.1/doc/Installing_OSX.html
|
||||
--- Argyll_V1.0.1.orig/doc/Installing_OSX.html 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/doc/Installing_OSX.html 2008-07-27 11:39:58.000000000 +0200
|
||||
@@ -30,7 +30,7 @@
|
||||
with how to do this, consult an appropriate tutorial, e.g. <<a
|
||||
href="http://heather.cs.ucdavis.edu/%7Ematloff/UnixAndC/Unix/ShellIntro.html#tth_sEc1">ShellIntro</a>>.
|
||||
The .tgz file also contains several useful reference files (such as
|
||||
-scanner chart recognition templates, sample illumination spectrum
|
||||
+acquisition device chart recognition templates, sample illumination spectrum
|
||||
etc.) in the ref sub-directory, as well as
|
||||
all the current documentation in a doc sub-directory.<br>
|
||||
<br>
|
||||
diff -uNr Argyll_V1.0.1.orig/doc/Organisation.html Argyll_V1.0.1/doc/Organisation.html
|
||||
--- Argyll_V1.0.1.orig/doc/Organisation.html 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/doc/Organisation.html 2008-07-27 11:36:55.000000000 +0200
|
||||
@@ -13,7 +13,7 @@
|
||||
This directory contains routines that generate calibration test charts,
|
||||
based
|
||||
on various distribution algorithms suitable for
|
||||
-reading using an Xrite DTP51 or DTP41 colorimeter, or scanner for print
|
||||
+reading using an Xrite DTP51 or DTP41 colorimeter, or acquisition device for print
|
||||
charts,
|
||||
the Gretag Spectrolino for film charts, or the Xrite DTP92 pr DTP94 for
|
||||
monitor
|
||||
diff -uNr Argyll_V1.0.1.orig/doc/printtarg.html Argyll_V1.0.1/doc/printtarg.html
|
||||
--- Argyll_V1.0.1.orig/doc/printtarg.html 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/doc/printtarg.html 2008-07-27 11:36:27.000000000 +0200
|
||||
@@ -167,7 +167,7 @@
|
||||
file, and a .ti2 file containing the device test values together with
|
||||
the layout information needed to identify the patch location. This
|
||||
module can also generate the image recognition templates needed to read
|
||||
-the print targets in using a scanner.<br>
|
||||
+the print targets in using an acquisition device.<br>
|
||||
<br>
|
||||
<a name="v"></a> The <b>-v</b> flag turns on verbose mode. Prints
|
||||
information about how many patches there are in a row, how many patches
|
||||
diff -uNr Argyll_V1.0.1.orig/doc/scanin.html Argyll_V1.0.1/doc/scanin.html
|
||||
--- Argyll_V1.0.1.orig/doc/scanin.html 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/doc/scanin.html 2008-07-27 11:34:18.000000000 +0200
|
||||
@@ -23,7 +23,7 @@
|
||||
recogin.cht
|
||||
valin.cie [diag.tif]</span><br style="font-family: monospace;">
|
||||
<span style="font-family: monospace;"> :- inputs
|
||||
-'input.tif', and outputs scanner
|
||||
+'input.tif', and outputs device
|
||||
'input.ti3', or</span><br style="font-family: monospace;">
|
||||
<br style="font-family: monospace;">
|
||||
<a style="font-family: monospace;" href="#g"> usage</a><span
|
||||
@@ -85,7 +85,7 @@
|
||||
style="font-family: monospace;">
|
||||
Replace device values in .ti3</span><br style="font-family: monospace;">
|
||||
<span style="font-family: monospace;">
|
||||
-Default is to create a scanner .ti3 file<br>
|
||||
+Default is to create a device .ti3 file<br>
|
||||
</span></small><small><span style="font-family: monospace;"> </span><a
|
||||
style="font-family: monospace;" href="#F">-F x1,y1,x2,y2,x3,y3,x4,y4</a><span
|
||||
style="font-family: monospace;"> <br>
|
||||
@@ -187,10 +187,10 @@
|
||||
of the chart are visible within the image, and if the image is cropped
|
||||
to exclude the chart edges, it may well not recognize the chart
|
||||
properly. It is designed to cope with a variety of resolutions, and
|
||||
-will cope with some degree of noise in the scan (due to screening
|
||||
+will cope with some degree of noise in the acquisition (due to screening
|
||||
artefacts on the original, or film grain), but it isn't really designed
|
||||
to accept very high resolution input. For anything over 600DPI, you
|
||||
-should consider down sampling the scan using a filtering downsample,
|
||||
+should consider down sampling the image using a filtering downsample,
|
||||
before submitting the file to scanin.<br>
|
||||
<br>
|
||||
There are 5 basic modes that <b>scanin</b> operates in.<br>
|
||||
@@ -199,7 +199,7 @@
|
||||
assumed to be parsing an input device characterization chart (ie. an
|
||||
IT8.7/2 chart), for the purpose of creating a <a
|
||||
href="File_Formats.html#.ti3">.ti3</a> data file containing
|
||||
-the CIE test values and the corresponding RGB scanner values. The <a
|
||||
+the CIE test values and the corresponding RGB device values. The <a
|
||||
href="File_Formats.html#.ti3">.ti3</a> file can then be used for
|
||||
creating
|
||||
an input profile using <a href="colprof.html">colprof</a>. The file
|
||||
@@ -221,7 +221,7 @@
|
||||
file in
|
||||
this situation, should be a good quality image, perhaps synthetically
|
||||
generated
|
||||
-(rather than being scanned), and perfectly oriented, to make
|
||||
+(rather than being parsed), and perfectly oriented, to make
|
||||
specification
|
||||
of the patch locations easier. The file arguments are: <a name="gp1"></a>The
|
||||
TIFF file that
|
||||
@@ -245,7 +245,7 @@
|
||||
input devices to be used as a crude replacement for a color measuring
|
||||
instrument. The icc profile has
|
||||
(presumably) been
|
||||
-created by scanning an IT8.7/2 chart (or similar) through the RGB input
|
||||
+created with an image of a IT8.7/2 chart (or similar) through the RGB input
|
||||
device,
|
||||
and
|
||||
then using scanin to create the .ti3 file needed to feed to colprof to
|
||||
@@ -267,7 +267,7 @@
|
||||
The resulting .ti3 file will have the same base name as the input TIFF
|
||||
file.
|
||||
If there is more than one page in the test chart, then scanin will need
|
||||
-to be run multiple times, once for each scan file made from each test
|
||||
+to be run multiple times, once for each image file made from each test
|
||||
chart. <a name="ca"></a>The <b>-ca</b> flag combination should be
|
||||
used
|
||||
for all pages after the first,
|
||||
@@ -339,7 +339,7 @@
|
||||
<br>
|
||||
<a name="p"></a>By default the automatic chart recognition copes with
|
||||
rotation, scale and stretch in the chart image, making it suitable for
|
||||
-charts that have been scanned, or shot squarely with a camera. If a
|
||||
+charts that have been acquired, or shot squarely with a camera. If a
|
||||
chart has been shot not exactly facing the camera (perhaps to avoid
|
||||
reflection, or to get more even lighting), then it will suffer from
|
||||
perspective distortion as well. The <span style="font-weight: bold;"><span
|
||||
@@ -349,7 +349,7 @@
|
||||
<a name="m"></a>Normally scanin computes an average of the pixel values
|
||||
within a sample square, using a "robust" mean, that discards pixel
|
||||
values that are too far from the average ("outlier" pixel values). This
|
||||
-is done in an attempt to discard value that are due to scanning
|
||||
+is done in an attempt to discard value that are due to acquisition
|
||||
artefacts such as dust, scratches etc. You can force scanin to return
|
||||
the true mean values for the sample squares that includes all the pixel
|
||||
values, by using the <span style="font-weight: bold;">-m</span> flag.<br>
|
||||
@@ -357,9 +357,9 @@
|
||||
<a name="G"></a>Normally scanin has reasonably robust feature
|
||||
recognition, but the default assumption is that the input chart has an
|
||||
approximately even visual distribution of patch values, and has been
|
||||
-scanned and converted to a typical gamma 2.2 corrected image, meaning
|
||||
+acquired and converted to a typical gamma 2.2 corrected image, meaning
|
||||
that the average patch pixel value is expected to be about 50%. If this
|
||||
-is not the case (for instance if the input chart has been scanned with
|
||||
+is not the case (for instance if the input chart has been processed with
|
||||
linear light or "raw" encoding), then it may enhance the image
|
||||
recognition to provide the approximate gamma encoding of the image. For
|
||||
instance, if linear light encoding ("Raw") is used, a <span
|
||||
diff -uNr Argyll_V1.0.1.orig/doc/Scenarios.html Argyll_V1.0.1/doc/Scenarios.html
|
||||
--- Argyll_V1.0.1.orig/doc/Scenarios.html 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/doc/Scenarios.html 2008-07-27 11:52:05.000000000 +0200
|
||||
@@ -32,17 +32,17 @@
|
||||
href="#PM5">Installing a
|
||||
display profile</a></h4>
|
||||
<h4><br>
|
||||
-<a href="#PS1">Profiling Scanners</a></h4>
|
||||
+<a href="#PS1">Profiling Acquisition Devices</a></h4>
|
||||
<h4> <a href="#PS2">Types of test charts</a></h4>
|
||||
-<h4> <a href="#PS3">Taking readings from a scanner</a></h4>
|
||||
-<h4> <a href="#PS4">Creating a scanner profile</a></h4>
|
||||
+<h4> <a href="#PS3">Taking readings from an acquisition device</a></h4>
|
||||
+<h4> <a href="#PS4">Creating an acquisition device profile</a></h4>
|
||||
<h4><br>
|
||||
<a href="#PP1">Profiling Printers</a></h4>
|
||||
<h4> <a href="#PP2">Creating a print test chart</a></h4>
|
||||
<h4> <a href="#PP3">Reading a print test chart
|
||||
using an instrument</a></h4>
|
||||
<h4> <a href="#PP4">Reading a print test chart
|
||||
-using a scanner</a></h4>
|
||||
+using an acquisition device</a></h4>
|
||||
<h4> </h4>
|
||||
<h4> <a href="#PP5">Creating a printer profile<br>
|
||||
</a></h4>
|
||||
@@ -353,14 +353,14 @@
|
||||
the connected display.<br>
|
||||
<br>
|
||||
<hr size="2" width="100%">
|
||||
-<h3><a name="PS1"></a>Profiling Scanners</h3>
|
||||
-Because a scanner is an input device, it is necessary to go about
|
||||
+<h3><a name="PS1"></a>Profiling Acquisition Devices</h3>
|
||||
+Because a acquisition device is an input device, it is necessary to go about
|
||||
profiling it in quite a different way to an output device. To profile
|
||||
-it, a test chart is needed to exercise the scanner response, to which
|
||||
+it, a test chart is needed to exercise the device response, to which
|
||||
the CIE values for each test patch is known. Generally standard
|
||||
reflection or transparency test charts are used for this purpose.<br>
|
||||
<h4><a name="PS2"></a>Types of test charts</h4>
|
||||
-The most common and popular test chart for scanner profiling is the
|
||||
+The most common and popular test chart for acquisiton device profiling is the
|
||||
IT8.7/2 chart. This is a standard format chart generally reproduced on
|
||||
photographic film, containing about 264 test patches. The Kodak Q-60
|
||||
Color Input Target is a typical example:<br>
|
||||
@@ -400,18 +400,18 @@
|
||||
<img alt="CMP_DT_003" src="CMP_DT_003.jpg"
|
||||
style="width: 186px; height: 141px;"><br>
|
||||
<br>
|
||||
-<h4><a name="PS3"></a>Taking readings from a scanner</h4>
|
||||
-The test chart you are using needs to be placed on the scanner, and the
|
||||
-scanner needs to be configured to a suitable state, and restored to
|
||||
+<h4><a name="PS3"></a>Taking readings from an acquisition device</h4>
|
||||
+The test chart you are using needs to be exposed to the device, and the
|
||||
+acquisition device needs to be configured to a suitable state, and restored to
|
||||
that
|
||||
same state when used subsequently with the resulting profile. The chart
|
||||
should
|
||||
be scanned, and saved to a TIFF format file. I will assume the
|
||||
resulting
|
||||
-file is called scanner.tif. The raster file need only be roughly
|
||||
+file is called device.tif. The raster file need only be roughly
|
||||
cropped so as to contain the test chart (including the charts edges).<br>
|
||||
<br>
|
||||
-The second step is to extract the RGB values from the scanner.tif file,
|
||||
+The second step is to extract the RGB values from the device.tif file,
|
||||
and match then to the reference CIE values.
|
||||
To locate the patch values in the scan, the <b>scanin</b> utility
|
||||
needs to
|
||||
@@ -485,32 +485,32 @@
|
||||
chart recognition template file will need to be created (this is beyond
|
||||
the scope of the current documentation).<br>
|
||||
<br>
|
||||
-To create the scanner .ti3 file, run the <b>scanin</b> utility as
|
||||
+To create the device .ti3 file, run the <b>scanin</b> utility as
|
||||
follows
|
||||
(assuming an IT8 chart is being used):<br>
|
||||
<br>
|
||||
-<a href="scanin.html"> scanin</a> -v scanner.tif It8.cht It8ref.txt<br>
|
||||
+<a href="scanin.html"> scanin</a> -v device.tif It8.cht It8ref.txt<br>
|
||||
<br>
|
||||
"It8ref.txt" is assumed to be the name of the CIE reference file
|
||||
-supplied by the chart manufacturer. The resulting file will be named "<b>scanner.ti3</b>".<br>
|
||||
+supplied by the chart manufacturer. The resulting file will be named "<b>device.ti3</b>".<br>
|
||||
<br>
|
||||
<span style="font-weight: bold;">scanin</span> will process 16 bit per
|
||||
-component .tiff files, which (if the scanner is capable of creating
|
||||
+component .tiff files, which (if the device is capable of creating
|
||||
such files), may improve the quality of the profile. <br>
|
||||
<br>
|
||||
If you have any doubts about the correctness of the chart recognition,
|
||||
or the subsequent profile's delta E report is unusual, then use the
|
||||
scanin diagnostic flags <a href="scanin.html#d">-dipn</a> and examine
|
||||
the <span style="font-weight: bold;">diag.tif</span> diagnostic file.<br>
|
||||
-<h4><a name="PS4"></a>Creating a scanner profile</h4>
|
||||
-Similar to a display profile, a scanner profile can be either a
|
||||
-shaper/matrix or LUT based profile. Well behaved scanners will
|
||||
+<h4><a name="PS4"></a>Creating an acquisition device profile</h4>
|
||||
+Similar to a display profile, an acquisition device profile can be either a
|
||||
+shaper/matrix or LUT based profile. Well behaved devices will
|
||||
probably give the best results
|
||||
with a shaper/matrix profile, but if the fit is poor, consider using a
|
||||
LUT
|
||||
type profile.<br>
|
||||
<br>
|
||||
-If the purpose of the scanner profile is to use it as a substitute for
|
||||
+If the purpose of the device profile is to use it as a substitute for
|
||||
a
|
||||
colorimeter, then the <b>-u</b> flag should be used to avoid clipping
|
||||
values above the white point. Unless the shaper/matrix type profile is
|
||||
@@ -520,24 +520,24 @@
|
||||
To create a matrix/shaper profile, the following suffices:<br>
|
||||
<br>
|
||||
<a href="colprof.html">colprof</a> <a href="colprof.html#v">-v</a> <a
|
||||
- href="colprof.html#E">-D"Scanner</a> <a href="colprof.html#E">A"</a> <a
|
||||
+ href="colprof.html#E">-D"Device</a> <a href="colprof.html#E">A"</a> <a
|
||||
href="colprof.html#q">-qm</a> <a href="colprof.html#a">-as</a>
|
||||
-<a href="colprof.html#p1">scanner</a><br>
|
||||
+<a href="colprof.html#p1">device</a><br>
|
||||
<br>
|
||||
For a LUT based profile then the following would be used:<br>
|
||||
<br>
|
||||
<a href="colprof.html">colprof</a> <a href="colprof.html#v">-v</a> <a
|
||||
- href="colprof.html#E">-D"Scanner A"</a>
|
||||
+ href="colprof.html#E">-D"Device A"</a>
|
||||
<a href="colprof.html#q">-qm</a>
|
||||
-<a href="colprof.html#p1">scanner</a><br>
|
||||
+<a href="colprof.html#p1">device</a><br>
|
||||
<br>
|
||||
For the purposes of a poor mans colorimeter, the following would
|
||||
generally be used:<br>
|
||||
<br>
|
||||
<a href="colprof.html">colprof</a> <a href="colprof.html#v">-v</a> <a
|
||||
- href="colprof.html#E">-D"Scanner A"</a>
|
||||
+ href="colprof.html#E">-D"Device A"</a>
|
||||
<a href="colprof.html#q">-qm</a> <a href="colprof.html#u">-u</a>
|
||||
-<a href="colprof.html#p1">scanner</a><br>
|
||||
+<a href="colprof.html#p1">device</a><br>
|
||||
<br>
|
||||
Make sure you check the delta E report at the end of the profile
|
||||
creation, to see if the profile is behaving reasonably.<br>
|
||||
@@ -703,7 +703,7 @@
|
||||
<a href="printtarg.html#i">-ii1</a> <a href="printtarg.html#p">-pA4</a>
|
||||
<a href="printtarg.html#p1">PrinterA</a><br>
|
||||
<br>
|
||||
-For using with a scanner as a colorimeter, the Gretag Spectroscan
|
||||
+For using with an acquisition device as a colorimeter, the Gretag Spectroscan
|
||||
layout is suitable, but the <a href="printtarg.html#s">-s</a> flag
|
||||
should be used so as to generate a layout suitable for scan
|
||||
recognition, as well as generating the scan recognition template
|
||||
@@ -804,28 +804,27 @@
|
||||
for each type of instrument. Continue with <a href="Scenarios.html#PP5">Creating
|
||||
a printer profile</a>.<br>
|
||||
<br>
|
||||
-<h4><a name="PP4"></a>Reading a print test chart using a scanner or
|
||||
-camera<br>
|
||||
+<h4><a name="PP4"></a>Reading a print test chart using an acquisition device<br>
|
||||
</h4>
|
||||
<br>
|
||||
-Argyll supports using a scanner or even a camera as a substitute for a
|
||||
+Argyll supports using any acquisition device as a substitute for a
|
||||
colorimeter.
|
||||
-While a scanner or camera is no replacement for a color measurement
|
||||
+While most are no replacement for a color measurement
|
||||
instrument, it may give acceptable results in some situations, and may
|
||||
give better results than a generic profile for a printing device.<br>
|
||||
<br>
|
||||
-The main limitation of the scanner-as-colorimeter approach are:<br>
|
||||
+The main limitation of the any-device-as-colorimeter approach are:<br>
|
||||
<br>
|
||||
-* The scanner dynamic range and/or precision may not match the printers
|
||||
+* The acquisition device dynamic range and/or precision may not match the printers
|
||||
or what is required for a good profile.<br>
|
||||
-* The spectral interaction of the scanner test chart and printer test
|
||||
-chart with the scanner
|
||||
+* The spectral interaction of the device test chart and printer test
|
||||
+chart with the device
|
||||
spectral response can cause color errors.<br>
|
||||
* Spectral differences caused by different black amounts in the print
|
||||
test chart can cause
|
||||
color errors. <br>
|
||||
* The IT8 chart gamut may be so much smaller than the printers that the
|
||||
-scanner profile is too inaccurate. <br>
|
||||
+acquisition device profile is too inaccurate. <br>
|
||||
<br>
|
||||
As well as some of the above, a camera may not be suitable if it
|
||||
automatically adjusts exposure or white point when taking a picture,
|
||||
@@ -834,23 +833,23 @@
|
||||
The end result is often a profile that has a slight color cast to,
|
||||
compared to a profile created using a colorimeter or spectrometer..<br>
|
||||
<br>
|
||||
-It is assumed that you have created a scanner or camera profile
|
||||
+It is assumed that you have created an acquisition device profile
|
||||
following the <a href="http://www.argyllcms.com/doc/Scenarios.html#PS1">procedure</a>
|
||||
outline above. For best possible results it
|
||||
-is advisable to both profile the scanner or camera, and use it in
|
||||
+is advisable to both profile the acquisition device, and use it in
|
||||
scanning the
|
||||
printed test chart, in as "raw" mode as possible (i.e. using 16 bits
|
||||
-per component images, if the scanner or camera is
|
||||
+per component images, if the acquisition device is
|
||||
capable of doing so; not setting white or black points, using a fixed
|
||||
exposure etc.). It is
|
||||
generally advisable to create a LUT type input profile, and use the <a
|
||||
href="http://www.argyllcms.com/doc/colprof.html#u">-u</a> flag to
|
||||
avoid clipping scanned value whiter than the input calibration chart.<br>
|
||||
<br>
|
||||
-Scan or photograph your printer chart (or charts) on the scanner or
|
||||
-camera previously profiled.
|
||||
+Scan or photograph your printer chart (or charts) on the acquisition device
|
||||
+previously profiled.
|
||||
<big><span style="font-weight: bold;">The
|
||||
-scanner or camera must be configured and used exactly the same as it
|
||||
+acquisition device must be configured and used exactly the same as it
|
||||
was when it
|
||||
was profiled.</span></big><br>
|
||||
<br>
|
||||
@@ -858,21 +857,21 @@
|
||||
style="font-weight: bold;">PrinterB.tif</span> (or <span
|
||||
style="font-weight: bold;">PrinterB1.tif</span>, <span
|
||||
style="font-weight: bold;">PrinterB2.tif</span> etc. in the case of
|
||||
-multiple charts). As with profiling the scanner or camera, the raster
|
||||
+multiple charts). As with profiling the acquisition device, the raster
|
||||
file need
|
||||
only be roughly cropped so as to contain the test chart.<br>
|
||||
<br>
|
||||
-The scanner recognition files
|
||||
+The acquisition device recognition files
|
||||
created when <span style="font-weight: bold;">printtarg</span> was run
|
||||
is assumed to be called <span style="font-weight: bold;">PrinterB.cht</span>.
|
||||
-Using the scanner profile created previously (assumed to be called <span
|
||||
- style="font-weight: bold;">scanner.icm</span>), the printer test chart
|
||||
+Using the device profile created previously (assumed to be called <span
|
||||
+ style="font-weight: bold;">device.icm</span>), the printer test chart
|
||||
scan patches are converted to CIE values using the <span
|
||||
style="font-weight: bold;">scanin</span> utility:<br>
|
||||
<br>
|
||||
<a href="scanin.html">scanin</a> <a href="scanin.html#v">-v</a> <a
|
||||
href="scanin.html#c">-c</a> <a href="scanin.html#cp1">PrinterB.tif</a>
|
||||
-<a href="scanin.html#cp2">PrinterB.cht</a> <a href="scanin.html#cp3">scanner.icm</a>
|
||||
+<a href="scanin.html#cp2">PrinterB.cht</a> <a href="scanin.html#cp3">device.icm</a>
|
||||
<a href="scanin.html#cp4">PrinterB</a><br>
|
||||
<br>
|
||||
If there were multiple test chart pages, the results would be
|
||||
@@ -881,15 +880,15 @@
|
||||
<br>
|
||||
<a href="scanin.html">scanin</a> <a href="scanin.html#v">-v</a> <a
|
||||
href="scanin.html#c">-c</a> <a href="scanin.html#cp1">PrinterB1.tif</a>
|
||||
-<a href="scanin.html#cp2">PrinterB1.cht</a> <a href="scanin.html#cp3">scanner.icm</a>
|
||||
+<a href="scanin.html#cp2">PrinterB1.cht</a> <a href="scanin.html#cp3">device.icm</a>
|
||||
<a href="scanin.html#cp4">PrinterB</a><br>
|
||||
<a href="scanin.html">scanin</a> <a href="scanin.html#v">-v</a> <a
|
||||
href="scanin.html#ca">-ca</a> <a href="scanin.html#cp1">PrinterB2.tif</a>
|
||||
-<a href="scanin.html#cp2">PrinterB2.cht</a> <a href="scanin.html#cp3">scanner.icm</a>
|
||||
+<a href="scanin.html#cp2">PrinterB2.cht</a> <a href="scanin.html#cp3">device.icm</a>
|
||||
<a href="scanin.html#cp4">PrinterB</a><br>
|
||||
<a href="scanin.html">scanin</a> <a href="scanin.html#v">-v</a> <a
|
||||
href="scanin.html#ca">-ca</a> <a href="scanin.html#cp1">PrinterB3.tif</a>
|
||||
-<a href="scanin.html#cp2">PrinterB3.cht</a> <a href="scanin.html#cp3">scanner.icm</a>
|
||||
+<a href="scanin.html#cp2">PrinterB3.cht</a> <a href="scanin.html#cp3">device.icm</a>
|
||||
<a href="scanin.html#cp4">PrinterB</a><br>
|
||||
<br>
|
||||
Now that the <span style="font-weight: bold;">PrinterB.ti3</span> data
|
||||
diff -uNr Argyll_V1.0.1.orig/doc/targen.html Argyll_V1.0.1/doc/targen.html
|
||||
--- Argyll_V1.0.1.orig/doc/targen.html 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/doc/targen.html 2008-07-27 11:53:34.000000000 +0200
|
||||
@@ -615,7 +615,7 @@
|
||||
3 x Letter 1386<br>
|
||||
4 x Letter 1848<br>
|
||||
<br>
|
||||
- Scanner (printtarg with -iSS -s options):<br>
|
||||
+ Acquisition device (printtarg with -iSS -s options):<br>
|
||||
<br>
|
||||
1 x A4R 1014<br>
|
||||
2 x A4R 2028<br>
|
||||
diff -uNr Argyll_V1.0.1.orig/doc/ti3_format.html Argyll_V1.0.1/doc/ti3_format.html
|
||||
--- Argyll_V1.0.1.orig/doc/ti3_format.html 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/doc/ti3_format.html 2008-07-27 11:42:04.000000000 +0200
|
||||
@@ -173,7 +173,7 @@
|
||||
or "<span style="font-weight: bold;">RGB_LAB</span>" for an RGB printer
|
||||
or display, "<span style="font-weight: bold;">CMYK_XYZ</span>" for a
|
||||
printer, "<span style="font-weight: bold;">XYZ_RGB"</span> for an RGB
|
||||
-scanner.<br>
|
||||
+acquisition device.<br>
|
||||
<br>
|
||||
If spectral values are going to be included in the file, the following
|
||||
keywords and values shall be used:<br>
|
||||
diff -uNr Argyll_V1.0.1.orig/doc/ucmm.html Argyll_V1.0.1/doc/ucmm.html
|
||||
--- Argyll_V1.0.1.orig/doc/ucmm.html 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/doc/ucmm.html 2008-07-27 11:41:27.000000000 +0200
|
||||
@@ -13,7 +13,7 @@
|
||||
designed just to handle the necessary configuration needed to track the
|
||||
installation and association of ICC profiles with Unix/Linux X11
|
||||
displays. It could be expanded at some point to also hold the
|
||||
-associations for other devices such as scanner and printers.<br>
|
||||
+associations for other devices such as acquisition devices and printers.<br>
|
||||
<br>
|
||||
It consists primarily of a small configuration database that associates
|
||||
a display monitor (identified by its EDID or the X11 display name if an
|
||||
diff -uNr Argyll_V1.0.1.orig/log.txt Argyll_V1.0.1/log.txt
|
||||
--- Argyll_V1.0.1.orig/log.txt 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/log.txt 2008-07-27 11:35:38.000000000 +0200
|
||||
@@ -1648,7 +1648,7 @@
|
||||
|
||||
* Added shaper/matrix input profile support.
|
||||
(profile/profin.c, xicc/xmatrix.c)
|
||||
- This may be more accurate for scanner profiles,
|
||||
+ This may be more accurate for device profiles,
|
||||
given the poor coverage of test points provided
|
||||
by an IT8 chart (but doesn't appear to be in practice).
|
||||
|
||||
@@ -1659,7 +1659,7 @@
|
||||
|
||||
* Added support in scanin.c and scanrd.c for
|
||||
using a scan of a print test chart, plus a
|
||||
- profile for the scanner, to be able to measure
|
||||
+ profile for the device, to be able to measure
|
||||
color for printer calibration. This
|
||||
new mode handles multi-page test charts.
|
||||
|
||||
@@ -1689,13 +1689,13 @@
|
||||
patch spacer contrast determination.
|
||||
Also added an XYZ to sRGB conversion
|
||||
function to support RGB previews of N color
|
||||
- devices, as well as scanner recognition template files.
|
||||
+ devices, as well as device recognition template files.
|
||||
|
||||
* Expanded xicc/xcolorants.c to incorporate
|
||||
an approximate device model for arbitrary
|
||||
colorant combinations. This is used to
|
||||
be able to approximate expected density readings,
|
||||
- as well as preview colors and scanner recognition templates.
|
||||
+ as well as preview colors and device recognition templates.
|
||||
|
||||
* Create a new test point creation module,
|
||||
target/simplat.c, to create higher dimentional,
|
||||
@@ -1793,7 +1793,7 @@
|
||||
|
||||
* Added preliminary support in printtarg for the SpectroScan
|
||||
spectrodensitometer. Also added preliminary support for
|
||||
- scanner recognisable test charts.
|
||||
+ device recognisable test charts.
|
||||
|
||||
* Added option to icclink to turn off the use of linearisation
|
||||
curves in the output link, since this sometimes seems to
|
||||
@@ -1960,7 +1960,7 @@
|
||||
Cleaned up build automation somewhat.
|
||||
|
||||
Added RGB output device profile generation support.
|
||||
- Added RGB scanner device profile generation support.
|
||||
+ Added RGB device profile generation support.
|
||||
|
||||
Added a couple of spectrometer conversion utilities for
|
||||
raw data files from other CMSs.
|
||||
diff -uNr Argyll_V1.0.1.orig/profile/profcheck.c Argyll_V1.0.1/profile/profcheck.c
|
||||
--- Argyll_V1.0.1.orig/profile/profcheck.c 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/profile/profcheck.c 2008-07-27 11:54:01.000000000 +0200
|
||||
@@ -360,7 +360,7 @@
|
||||
devchan = 3;
|
||||
isLab = 1;
|
||||
isAdditive = 1;
|
||||
- /* Scanner .ti3 files: */
|
||||
+ /* Acquisition Device .ti3 files: */
|
||||
} else if (strcmp(icg->t[0].kdata[ti],"XYZ_RGB") == 0) {
|
||||
devspace = icSigRgbData;
|
||||
devchan = 3;
|
||||
diff -uNr Argyll_V1.0.1.orig/profile/profin.c Argyll_V1.0.1/profile/profin.c
|
||||
--- Argyll_V1.0.1.orig/profile/profin.c 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/profile/profin.c 2008-07-27 11:53:08.000000000 +0200
|
||||
@@ -49,7 +49,7 @@
|
||||
/*
|
||||
Basic algorithm outline:
|
||||
|
||||
- Scanner:
|
||||
+ Acquisition Device:
|
||||
|
||||
Figure out the input curves to give
|
||||
the flattest grid.
|
||||
diff -uNr Argyll_V1.0.1.orig/scanin/scanin.c Argyll_V1.0.1/scanin/scanin.c
|
||||
--- Argyll_V1.0.1.orig/scanin/scanin.c 2008-07-27 11:18:53.000000000 +0200
|
||||
+++ Argyll_V1.0.1/scanin/scanin.c 2008-07-27 11:26:37.000000000 +0200
|
||||
@@ -2,7 +2,7 @@
|
||||
/*
|
||||
* Argyll Color Correction System
|
||||
*
|
||||
- * Scanin: Input the scan of a test chart, and output cgats data
|
||||
+ * Scanin: Input the image of a test chart, and output cgats data
|
||||
* Uses scanrd to do the hard work.
|
||||
*
|
||||
* Author: Graeme W. Gill
|
||||
@@ -72,7 +72,7 @@
|
||||
fprintf(stderr,"Author: Graeme W. Gill, licensed under the GPL Version 3\n");
|
||||
fprintf(stderr,"\n");
|
||||
fprintf(stderr,"usage: scanin [options] input.tif recogin.cht valin.cie [diag.tif]\n");
|
||||
- fprintf(stderr," :- inputs 'input.tif' and outputs scanner 'input.ti3', or\n");
|
||||
+ fprintf(stderr," :- inputs 'input.tif' and outputs device 'input.ti3', or\n");
|
||||
fprintf(stderr,"\n");
|
||||
fprintf(stderr,"usage: scanin -g [options] input.tif recogout.cht [diag.tif]\n");
|
||||
fprintf(stderr," :- outputs file 'recogout.cht', or\n");
|
||||
@@ -92,7 +92,7 @@
|
||||
fprintf(stderr," -ca Same as -c, but accumulates more values to .ti3\n");
|
||||
fprintf(stderr," from subsequent pages\n");
|
||||
fprintf(stderr," -r Replace device values in .ti2/.ti3\n");
|
||||
- fprintf(stderr," Default is to create a scanner .ti3 file\n");
|
||||
+ fprintf(stderr," Default is to create a device .ti3 file\n");
|
||||
fprintf(stderr," -F x1,y1,x2,y2,x3,y3,x4,y4\n");
|
||||
fprintf(stderr," Don't auto recognize, locate using four fiducual marks\n");
|
||||
fprintf(stderr," -p Compensate for perspective distortion\n");
|
||||
@@ -127,12 +127,12 @@
|
||||
static char datin_name[200] = { 0 }; /* Data input name (.cie/.q60) */
|
||||
static char datout_name[200] = { 0 }; /* Data output name (.ti3/.val) */
|
||||
static char recog_name[200] = { 0 }; /* Reference chart name (.cht) */
|
||||
- static char prof_name[200] = { 0 }; /* scanner profile name (.cht) */
|
||||
+ static char prof_name[200] = { 0 }; /* device profile name (.cht) */
|
||||
static char diag_name[200] = { 0 }; /* Diagnostic Output (.tif) name, if used */
|
||||
int verb = 1;
|
||||
int tmean = 0; /* Return true mean, rather than robust mean */
|
||||
int repl = 0; /* Replace .ti3 device values from raster file */
|
||||
- int outo = 0; /* Output the values read, rather than creating scanner .ti3 */
|
||||
+ int outo = 0; /* Output the values read, rather than creating device .ti3 */
|
||||
int colm = 0; /* Use inage values to measure color for print profile. > 1 == append */
|
||||
int flags = SI_GENERAL_ROT; /* Default allow all rotations */
|
||||
|
||||
@@ -153,7 +153,7 @@
|
||||
scanrd *sr; /* Scanrd object */
|
||||
int err;
|
||||
char *errm;
|
||||
- int pnotscan = 0; /* Number of patches that wern't scanned */
|
||||
+ int pnotscan = 0; /* Number of patches that weren't processed */
|
||||
|
||||
if (argc <= 1)
|
||||
usage();
|
||||
diff -uNr Argyll_V1.0.1.orig/target/printtarg.c Argyll_V1.0.1/target/printtarg.c
|
||||
--- Argyll_V1.0.1.orig/target/printtarg.c 2008-07-27 11:18:52.000000000 +0200
|
||||
+++ Argyll_V1.0.1/target/printtarg.c 2008-07-27 11:37:20.000000000 +0200
|
||||
@@ -3252,7 +3252,7 @@
|
||||
}
|
||||
|
||||
/******************************************************************/
|
||||
-/* Edge tracking support, for generating the scanner image */
|
||||
+/* Edge tracking support, for generating the device image */
|
||||
/* recognition reference chart file. */
|
||||
|
||||
/* Establish width and height to convert between topleft and */
|
||||
diff -uNr Argyll_V1.0.1.orig/ttbd.txt Argyll_V1.0.1/ttbd.txt
|
||||
--- Argyll_V1.0.1.orig/ttbd.txt 2008-07-27 11:18:54.000000000 +0200
|
||||
+++ Argyll_V1.0.1/ttbd.txt 2008-07-27 11:54:46.000000000 +0200
|
||||
@@ -123,7 +123,7 @@
|
||||
|
||||
* Should create a .ti2 template file for some standard charts,
|
||||
such as an IT8.7/3, ECI2002 random and non-random etc.
|
||||
- Scanner recognition files too ??
|
||||
+ Device recognition files too ??
|
||||
|
||||
* Add an option to targen, that allows generation of
|
||||
test points down the neutral axis (how does this work
|
||||
@@ -293,7 +293,7 @@
|
||||
patch variance is too high (probable faulty read).
|
||||
|
||||
* Add spectral fix options to scanin code to allow compensation
|
||||
- for scanner and media errors when using a scanned image to
|
||||
+ for device and media errors when using an acquired image to
|
||||
measure color.
|
||||
This means figuring out how it will work, as well as creating
|
||||
to tools to create the spectral fix data (or just add general
|
||||
@ -1,3 +1,13 @@
|
||||
-------------------------------------------------------------------
|
||||
Mon Jan 16 16:21:17 UTC 2012 - fcrozat@suse.com
|
||||
|
||||
- Add copyright header to specfile
|
||||
- Clean specfile with spec-cleaner
|
||||
- Argyllcms is now mostly using AGPLv3, update License tag and use
|
||||
SPDX syntax.
|
||||
- Drop patch which was renaming scanner in documentation (not
|
||||
applied anyway).
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Thu Jan 12 10:36:56 UTC 2012 - kkaempf@suse.com
|
||||
|
||||
|
||||
@ -1,43 +1,59 @@
|
||||
#
|
||||
# spec file for package argyllcms
|
||||
#
|
||||
# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany.
|
||||
#
|
||||
# All modifications and additions to the file contributed by third parties
|
||||
# remain the property of their copyright owners, unless otherwise agreed
|
||||
# upon. The license for this file, and modifications and additions to the
|
||||
# file, is the same license as for the pristine package itself (unless the
|
||||
# license for the pristine package is not an Open Source License, in which
|
||||
# case the license is the MIT License). An "Open Source License" is a
|
||||
# license that conforms to the Open Source Definition (Version 1.9)
|
||||
# published by the Open Source Initiative.
|
||||
|
||||
# Please submit bugfixes or comments via http://bugs.opensuse.org/
|
||||
#
|
||||
|
||||
#define alphaversion Beta8
|
||||
#define alphatag .%{alphaversion}
|
||||
|
||||
%define archivename Argyll_V%{version}%{?alphaversion}_src.zip
|
||||
|
||||
Name: argyllcms
|
||||
Version: 1.3.5
|
||||
Release: 1
|
||||
Summary: ICC compatible color management system
|
||||
Name: argyllcms
|
||||
Version: 1.3.5
|
||||
Release: 1
|
||||
Summary: ICC compatible color management system
|
||||
|
||||
Group: System/X11/Utilities
|
||||
License: GPLv3 and MIT
|
||||
URL: http://www.%{name}.com/
|
||||
License: AGPL-3.0 & GPL-2.0+ & MIT
|
||||
Url: http://www.%{name}.com/
|
||||
Group: System/X11/Utilities
|
||||
|
||||
Source0: %{url}%{archivename}
|
||||
Source1: 19-color.fdi
|
||||
Source2: color-device-file.policy
|
||||
Source0: %{url}%{archivename}
|
||||
Source1: 19-color.fdi
|
||||
Source2: color-device-file.policy
|
||||
# Many thanks to Alastair M. Robinson and Roland Mas (debian)
|
||||
Patch1: Argyll_V1.3.0_autotools.patch
|
||||
Patch1: Argyll_V1.3.0_autotools.patch
|
||||
# new and changed files in 1.3.5
|
||||
Patch2: Argyll_V1.3.5_autotools.patch
|
||||
# Patch applied for legal reasons
|
||||
Patch4: argyllcms-1.0.2-legal.patch
|
||||
Patch2: Argyll_V1.3.5_autotools.patch
|
||||
# drop udev-acl stuff, handled by udev directly (Mandriva)
|
||||
Patch5: argyllcms-1.3.0-udev151.patch
|
||||
Patch5: argyllcms-1.3.0-udev151.patch
|
||||
# add support for colorhug (http://hughski.com)
|
||||
Patch6: ColorHug-sensor-driver.patch
|
||||
Patch6: ColorHug-sensor-driver.patch
|
||||
|
||||
BuildRoot: %(mktemp -ud %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX)
|
||||
BuildRequires: libtiff-devel unzip
|
||||
BuildRequires: xorg-x11-devel
|
||||
BuildRequires: automake
|
||||
BuildRequires: autoconf
|
||||
BuildRequires: libtool
|
||||
BuildRequires: autoconf
|
||||
BuildRequires: automake
|
||||
BuildRequires: libtiff-devel
|
||||
BuildRequires: libtool
|
||||
BuildRequires: unzip
|
||||
BuildRequires: xorg-x11-devel
|
||||
BuildRoot: %{_tmppath}/%{name}-%{version}-build
|
||||
|
||||
BuildRequires: udev
|
||||
Requires: udev
|
||||
%if %suse_version < 1120
|
||||
BuildRequires: hal
|
||||
Requires: hal
|
||||
BuildRequires: udev
|
||||
Requires: udev
|
||||
%if 0%{?suse_version} < 1120
|
||||
BuildRequires: hal
|
||||
Requires: hal
|
||||
%endif
|
||||
|
||||
%description
|
||||
@ -55,12 +71,11 @@ engine available anywhere, as well as support for fast, fully accurate 16 bit
|
||||
conversion. Device color gamuts can also be viewed and compared using a VRML
|
||||
viewer.
|
||||
|
||||
|
||||
%package doc
|
||||
Summary: Argyll CMS documentation
|
||||
Group: System/X11/Utilities
|
||||
Summary: Argyll CMS documentation
|
||||
Group: System/X11/Utilities
|
||||
# Does not really make sense without Argyll CMS itself
|
||||
Requires: %{name} = %{version}-%{release}
|
||||
Requires: %{name} = %{version}
|
||||
|
||||
%description doc
|
||||
The Argyll color management system supports accurate ICC profile creation for
|
||||
@ -88,23 +103,20 @@ The icclib is a set of routines which implement the reading and
|
||||
writing of color profile files that conform to the International
|
||||
Color Consortium (ICC) Profile Format Specification, Version 3.4.
|
||||
|
||||
|
||||
%prep
|
||||
%setup -q -n Argyll_V%{version}
|
||||
# Autotools support
|
||||
%patch1 -p1 -b .auto
|
||||
%patch2 -p1
|
||||
# Legal patch required
|
||||
#patch4 -p1 -b .legal
|
||||
%if %suse_version >= 1120
|
||||
%if 0%{?suse_version} >= 1120
|
||||
%patch5 -p1 -b .udev151
|
||||
%if %suse_version >= 1140
|
||||
%if 0%{?suse_version} >= 1140
|
||||
# colorhug is for openSUSE >= 11.4 only
|
||||
%patch6 -p1
|
||||
%endif
|
||||
%endif
|
||||
|
||||
#needed by patches 1
|
||||
#needed by patches 1 & 2
|
||||
autoreconf -i
|
||||
|
||||
%build
|
||||
@ -113,12 +125,12 @@ make
|
||||
|
||||
|
||||
%install
|
||||
make install DESTDIR=%{buildroot}
|
||||
%make_install
|
||||
|
||||
# remove unpackaged files
|
||||
rm -f %{buildroot}/%{_libdir}/argyll/*.{la,a,so} %{buildroot}/%{_libdir}/*.{la,a}
|
||||
|
||||
%if %suse_version < 1120
|
||||
%if 0%{?suse_version} < 1120
|
||||
# Do some device permission magic
|
||||
install -d -m 0755 %{buildroot}%{_datadir}/hal/fdi/policy/10osvendor/
|
||||
install -p -m 0644 %{SOURCE1} \
|
||||
@ -130,7 +142,7 @@ install -p -m 0644 %{SOURCE2} \
|
||||
%else
|
||||
install -d -m 0755 %{buildroot}%{_sysconfdir}/udev/rules.d
|
||||
install -p -m 0644 libusb1/55-Argyll.rules \
|
||||
%{buildroot}%{_sysconfdir}/udev/rules.d
|
||||
%{buildroot}%{_sysconfdir}/udev/rules.d
|
||||
%endif
|
||||
|
||||
|
||||
@ -149,7 +161,7 @@ rm -rf %{buildroot}
|
||||
%dir %{_datadir}/color
|
||||
%{_datadir}/color/argyll
|
||||
|
||||
%if %suse_version < 1120
|
||||
%if 0%{?suse_version} < 1120
|
||||
%{_datadir}/hal/fdi/policy/10osvendor/19-color.fdi
|
||||
%{_datadir}/PolicyKit/policy/color-device-file.policy
|
||||
%else
|
||||
|
||||
Loading…
Reference in New Issue
Block a user