- Update to version 2.40:
* Objdump has a new command line option --show-all-symbols which will make it
display all symbols that match a given address when disassembling. (Normally
only the first symbol that matches an address is shown).
* Add --enable-colored-disassembly configure time option to enable colored
disassembly output by default, if the output device is a terminal. Note,
this configure option is disabled by default.
* DCO signed contributions are now accepted.
* objcopy --decompress-debug-sections now supports zstd compressed debug
sections. The new option --compress-debug-sections=zstd compresses debug
sections with zstd.
* addr2line and objdump --dwarf now support zstd compressed debug sections.
* The dlltool program now accepts --deterministic-libraries and
--non-deterministic-libraries as command line options to control whether or
not it generates deterministic output libraries. If neither of these options
are used the default is whatever was set when the binutils were configured.
* readelf and objdump now have a newly added option --sframe which dumps the
SFrame section.
* Add support for Intel RAO-INT instructions.
* Add support for Intel AVX-NE-CONVERT instructions.
* Add support for Intel MSRLIST instructions.
* Add support for Intel WRMSRNS instructions.
* Add support for Intel CMPccXADD instructions.
* Add support for Intel AVX-VNNI-INT8 instructions.
* Add support for Intel AVX-IFMA instructions.
* Add support for Intel PREFETCHI instructions.
* Add support for Intel AMX-FP16 instructions.
* gas now supports --compress-debug-sections=zstd to compress
debug sections with zstd.
* Add --enable-default-compressed-debug-sections-algorithm={zlib,zstd}
OBS-URL: https://build.opensuse.org/request/show/1060669
OBS-URL: https://build.opensuse.org/package/show/devel:gcc/binutils?expand=0&rev=429
- Update to binutils 2.39:
* The ELF linker will now generate a warning message if the stack is made
executable. Similarly it will warn if the output binary contains a
segment with all three of the read, write and execute permission
bits set. These warnings are intended to help developers identify
programs which might be vulnerable to attack via these executable
memory regions.
The warnings are enabled by default but can be disabled via a command
line option. It is also possible to build a linker with the warnings
disabled, should that be necessary.
* The ELF linker now supports a --package-metadata option that allows
embedding a JSON payload in accordance to the Package Metadata
specification.
* In linker scripts it is now possible to use TYPE=<type> in an output
section description to set the section type value.
* The objdump program now supports coloured/colored syntax
highlighting of its disassembler output for some architectures.
(Currently: AVR, RiscV, s390, x86, x86_64).
* The nm program now supports a --no-weak/-W option to make it ignore
weak symbols.
* The readelf and objdump programs now support a -wE option to prevent
them from attempting to access debuginfod servers when following
links.
* The objcopy program's --weaken, --weaken-symbol, and
--weaken-symbols options now works with unique symbols as well.
- Rebase binutils-compat-old-behaviour.diff, binutils-revert-hlasm-insns.diff,
binutils-revert-plt32-in-branches.diff and remove binutils-2.38-branch.diff.gz.
- For now use --disable-gprofng.
- Includes fixes for these CVEs:
bnc#1142579 aka CVE-2019-1010204 aka PR23765
OBS-URL: https://build.opensuse.org/request/show/993443
OBS-URL: https://build.opensuse.org/package/show/devel:gcc/binutils?expand=0&rev=413
- Update to binutils 2.38:
* elfedit: Add --output-abiversion option to update ABIVERSION.
* Add support for the LoongArch instruction set.
* Tools which display symbols or strings (readelf, strings, nm, objdump)
have a new command line option which controls how unicode characters are
handled. By default they are treated as normal for the tool. Using
--unicode=locale will display them according to the current locale.
Using --unicode=hex will display them as hex byte values, whilst
--unicode=escape will display them as escape sequences. In addition
using --unicode=highlight will display them as unicode escape sequences
highlighted in red (if supported by the output device).
* readelf -r dumps RELR relative relocations now.
* Support for efi-app-aarch64, efi-rtdrv-aarch64 and efi-bsdrv-aarch64 has been
added to objcopy in order to enable UEFI development using binutils.
* ar: Add --thin for creating thin archives. -T is a deprecated alias without
diagnostics. In many ar implementations -T has a different meaning, as
specified by X/Open System Interface.
* Add support for AArch64 system registers that were missing in previous
releases.
* Add support for the LoongArch instruction set.
* Add a command-line option, -muse-unaligned-vector-move, for x86 target
to encode aligned vector move as unaligned vector move.
* Add support for Cortex-R52+ for Arm.
* Add support for Cortex-A510, Cortex-A710, Cortex-X2 for AArch64.
* Add support for Cortex-A710 for Arm.
* Add support for Scalable Matrix Extension (SME) for AArch64.
* The --multibyte-handling=[allow|warn|warn-sym-only] option tells the
assembler what to when it encoutners multibyte characters in the input. The
default is to allow them. Setting the option to "warn" will generate a
warning message whenever any multibyte character is encountered. Using the
There are no new CVEs fixed in the release.
OBS-URL: https://build.opensuse.org/request/show/953949
OBS-URL: https://build.opensuse.org/package/show/devel:gcc/binutils?expand=0&rev=387
- Update to binutils 2.37:
* The GNU Binutils sources now requires a C99 compiler and library to
build.
* Support for the arm-symbianelf format has been removed.
* Support for Realm Management Extension (RME) for AArch64 has been
added.
* A new linker option '-z report-relative-reloc' for x86 ELF targets
has been added to report dynamic relative relocations.
* A new linker option '-z start-stop-gc' has been added to disable
special treatment of __start_*/__stop_* references when
--gc-sections.
* A new linker options '-Bno-symbolic' has been added which will
cancel the '-Bsymbolic' and '-Bsymbolic-functions' options.
* The readelf tool has a new command line option which can be used to
specify how the numeric values of symbols are reported.
--sym-base=0|8|10|16 tells readelf to display the values in base 8,
base 10 or base 16. A sym base of 0 represents the default action
of displaying values under 10000 in base 10 and values above that in
base 16.
* A new format has been added to the nm program. Specifying
'--format=just-symbols' (or just using -j) will tell the program to
only display symbol names and nothing else.
* A new command line option '--keep-section-symbols' has been added to
objcopy and strip. This stops the removal of unused section symbols
when the file is copied. Removing these symbols saves space, but
sometimes they are needed by other tools.
* The '--weaken', '--weaken-symbol' and '--weaken-symbols' options
supported by objcopy now make undefined symbols weak on targets that
support weak symbols.
* Readelf and objdump can now display and use the contents of .debug_sup
OBS-URL: https://build.opensuse.org/request/show/907786
OBS-URL: https://build.opensuse.org/package/show/devel:gcc/binutils?expand=0&rev=363
- Update to binutils 2.35:
* The asseembler can now produce DWARF-5 format line number tables.
* Readelf now has a "lint" mode to enable extra checks of the files it is processing.
* Readelf will now display "[...]" when it has to truncate a symbol name.
The old behaviour - of displaying as many characters as possible, up to
the 80 column limit - can be restored by the use of the --silent-truncation
option.
* The linker can now produce a dependency file listing the inputs that it
has processed, much like the -M -MP option supported by the compiler.
- Regenerate add-ulp-section.diff with -p1 due to a fuzzing issue.
- Remove binutils-2.34-branch.diff.gz.
- Regenerate binutils-build-as-needed.diff due to a fuzzing issue.
- Regenerate binutils-fix-invalid-op-errata.diff as one hunk was upstreamed.
- Remove upstreamed patch binutils-pr25593.diff.
- Regenerate unit-at-a-time.patch due to a fuzzing issue.
- Regenerate binutils-revert-plt32-in-branches.diff.
OBS-URL: https://build.opensuse.org/request/show/822679
OBS-URL: https://build.opensuse.org/package/show/devel:gcc/binutils?expand=0&rev=338
- Update to binutils 2.34:
* The disassembler (objdump --disassemble) now has an option to
generate ascii art thats show the arcs between that start and end
points of control flow instructions.
* The binutils tools now have support for debuginfod. Debuginfod is a
HTTP service for distributing ELF/DWARF debugging information as
well as source code. The tools can now connect to debuginfod
servers in order to download debug information about the files that
they are processing.
* The assembler and linker now support the generation of ELF format
files for the Z80 architecture.
- Rename and get binutils-2.34-branch.diff.gz (boo#1160254).
- Rebase add-ulp-section.diff, binutils-revert-plt32-in-branches.diff,
cross-avr-size.patch and binutils-skip-rpaths.patch.
- Add new subpackages for libctf and libctf-nobfd.
- Disable LTO due to boo#1163333.
- Includes fixes for these CVEs:
bnc#1153768 aka CVE-2019-17451 aka PR25070
bnc#1153770 aka CVE-2019-17450 aka PR25078
OBS-URL: https://build.opensuse.org/request/show/774884
OBS-URL: https://build.opensuse.org/package/show/devel:gcc/binutils?expand=0&rev=331
- Update to binutils 2.33.1:
* Adds support for the Arm Scalable Vector Extension version 2
(SVE2) instructions, the Arm Transactional Memory Extension (TME)
instructions and the Armv8.1-M Mainline and M-profile Vector
Extension (MVE) instructions.
* Adds support for the Arm Cortex-A76AE, Cortex-A77 and Cortex-M35P
processors and the AArch64 Cortex-A34, Cortex-A65, Cortex-A65AE,
Cortex-A76AE, and Cortex-A77 processors.
* Adds a .float16 directive for both Arm and AArch64 to allow
encoding of 16-bit floating point literals.
* For MIPS, Add -m[no-]fix-loongson3-llsc option to fix (or not)
Loongson3 LLSC Errata. Add a --enable-mips-fix-loongson3-llsc=[yes|no]
configure time option to set the default behavior. Set the default
if the configure option is not used to "no".
* The Cortex-A53 Erratum 843419 workaround now supports a choice of
which workaround to use. The option --fix-cortex-a53-843419 now
takes an optional argument --fix-cortex-a53-843419[=full|adr|adrp]
which can be used to force a particular workaround to be used.
See --help for AArch64 for more details.
* Add support for GNU_PROPERTY_AARCH64_FEATURE_1_BTI and
GNU_PROPERTY_AARCH64_FEATURE_1_PAC in ELF GNU program properties
in the AArch64 ELF linker.
* Add -z force-bti for AArch64 to enable GNU_PROPERTY_AARCH64_FEATURE_1_BTI
on output while warning about missing GNU_PROPERTY_AARCH64_FEATURE_1_BTI
on inputs and use PLTs protected with BTI.
* Add -z pac-plt for AArch64 to pick PAC enabled PLTs.
* Add --source-comment[=<txt>] option to objdump which if present,
provides a prefix to source code lines displayed in a disassembly.
* Add --set-section-alignment <section-name>=<power-of-2-align>
option to objcopy to allow the changing of section alignments.
OBS-URL: https://build.opensuse.org/request/show/744399
OBS-URL: https://build.opensuse.org/package/show/devel:gcc/binutils?expand=0&rev=319
- Update to binutils 2.32:
* The binutils now support for the C-SKY processor series.
* The x86 assembler now supports a -mvexwig=[0|1] option to control
encoding of VEX.W-ignored (WIG) VEX instructions.
It also has a new -mx86-used-note=[yes|no] option to generate (or
not) x86 GNU property notes.
* The MIPS assembler now supports the Loongson EXTensions R2 (EXT2),
the Loongson EXTensions (EXT) instructions, the Loongson Content
Address Memory (CAM) ASE and the Loongson MultiMedia extensions
Instructions (MMI) ASE.
* The addr2line, c++filt, nm and objdump tools now have a default
limit on the maximum amount of recursion that is allowed whilst
demangling strings. This limit can be disabled if necessary.
* Objdump's --disassemble option can now take a parameter,
specifying the starting symbol for disassembly. Disassembly will
continue from this symbol up to the next symbol or the end of the
function.
* The BFD linker will now report property change in linker map file
when merging GNU properties.
* The BFD linker's -t option now doesn't report members within
archives, unless -t is given twice. This makes it more useful
when generating a list of files that should be packaged for a
linker bug report.
* The GOLD linker has improved warning messages for relocations that
refer to discarded sections.
- Remove binutils-2.31-branch.diff.gz, fix-pr23919-[123].diff,
gold-depend-on-opcodes.diff and s390-relro.diff.
- Refresh binutils-skip-rpaths.patch, s390-biarch.diff, cross-avr-size.patch
and binutils-revert-plt32-in-branches.diff.
- Update to binutils 2.32:
* The binutils now support for the C-SKY processor series.
* The x86 assembler now supports a -mvexwig=[0|1] option to control
encoding of VEX.W-ignored (WIG) VEX instructions.
It also has a new -mx86-used-note=[yes|no] option to generate (or
not) x86 GNU property notes.
* The MIPS assembler now supports the Loongson EXTensions R2 (EXT2),
the Loongson EXTensions (EXT) instructions, the Loongson Content
Address Memory (CAM) ASE and the Loongson MultiMedia extensions
Instructions (MMI) ASE.
* The addr2line, c++filt, nm and objdump tools now have a default
limit on the maximum amount of recursion that is allowed whilst
demangling strings. This limit can be disabled if necessary.
* Objdump's --disassemble option can now take a parameter,
specifying the starting symbol for disassembly. Disassembly will
continue from this symbol up to the next symbol or the end of the
function.
* The BFD linker will now report property change in linker map file
when merging GNU properties.
* The BFD linker's -t option now doesn't report members within
archives, unless -t is given twice. This makes it more useful
when generating a list of files that should be packaged for a
linker bug report.
* The GOLD linker has improved warning messages for relocations that
refer to discarded sections.
- Remove binutils-2.31-branch.diff.gz, fix-pr23919-[123].diff,
gold-depend-on-opcodes.diff and s390-relro.diff.
- Refresh binutils-skip-rpaths.patch, s390-biarch.diff, cross-avr-size.patch
and binutils-revert-plt32-in-branches.diff.
OBS-URL: https://build.opensuse.org/request/show/671129
OBS-URL: https://build.opensuse.org/package/show/devel:gcc/binutils?expand=0&rev=294
the support for the X86_ISA_1_* notes. Adds
patch binutils-2.31-branch.diff.gz .
- Add binutils-revert-plt32-in-branches.diff on anything older
than Tumbleweed to not break old tools not expecting
PLT32 instead of PC32 relocs on x86_64.
OBS-URL: https://build.opensuse.org/package/show/devel:gcc/binutils?expand=0&rev=284
