------------------------------------------------------------------- Fri Mar 4 10:44:39 UTC 2022 - Martin Liška - Update binutils-2.38-branch.diff.gz in order to include PR28879. ------------------------------------------------------------------- Tue Mar 1 12:41:27 UTC 2022 - Michael Matz - From Stefan Brüns : * Install symlinks for all target specific tools on arm-eabi-none [bsc#1185712] ------------------------------------------------------------------- Thu Feb 24 09:10:44 UTC 2022 - Martin Liška - Do not re-generate ld/ldlex.c, ld/ldgram.c, ld/ldgram.h and verify that corresponding flex/bison files are not modified by a patch. ------------------------------------------------------------------- Thu Feb 24 06:55:14 UTC 2022 - Martin Liška - Use verbose mode for make for cross compilers. ------------------------------------------------------------------- Wed Feb 23 17:52:15 UTC 2022 - Michael Matz - Make it build on SLE-11 again. ------------------------------------------------------------------- Tue Feb 22 09:13:15 UTC 2022 - Martin Liška - Use verbose mode for make. ------------------------------------------------------------------- Sat Feb 12 19:13:31 UTC 2022 - Martin Liška - Update to binutils 2.38: * elfedit: Add --output-abiversion option to update ABIVERSION. * Add support for the LoongArch instruction set. * Tools which display symbols or strings (readelf, strings, nm, objdump) have a new command line option which controls how unicode characters are handled. By default they are treated as normal for the tool. Using --unicode=locale will display them according to the current locale. Using --unicode=hex will display them as hex byte values, whilst --unicode=escape will display them as escape sequences. In addition using --unicode=highlight will display them as unicode escape sequences highlighted in red (if supported by the output device). * readelf -r dumps RELR relative relocations now. * Support for efi-app-aarch64, efi-rtdrv-aarch64 and efi-bsdrv-aarch64 has been added to objcopy in order to enable UEFI development using binutils. * ar: Add --thin for creating thin archives. -T is a deprecated alias without diagnostics. In many ar implementations -T has a different meaning, as specified by X/Open System Interface. * Add support for AArch64 system registers that were missing in previous releases. * Add support for the LoongArch instruction set. * Add a command-line option, -muse-unaligned-vector-move, for x86 target to encode aligned vector move as unaligned vector move. * Add support for Cortex-R52+ for Arm. * Add support for Cortex-A510, Cortex-A710, Cortex-X2 for AArch64. * Add support for Cortex-A710 for Arm. * Add support for Scalable Matrix Extension (SME) for AArch64. * The --multibyte-handling=[allow|warn|warn-sym-only] option tells the assembler what to when it encoutners multibyte characters in the input. The default is to allow them. Setting the option to "warn" will generate a warning message whenever any multibyte character is encountered. Using the option to "warn-sym-only" will make the assembler generate a warning whenever a symbol is defined containing multibyte characters. (References to undefined symbols will not generate warnings). * Outputs of .ds.x directive and .tfloat directive with hex input from x86 assembler have been reduced from 12 bytes to 10 bytes to match the output of .tfloat directive. * Add support for 'armv8.8-a', 'armv9-a', 'armv9.1-a', 'armv9.2-a' and 'armv9.3-a' for -march in AArch64 GAS. * Add support for 'armv8.7-a', 'armv8.8-a', 'armv9-a', 'armv9.1-a', 'armv9.2-a' and 'armv9.3-a' for -march in Arm GAS. * Add support for Intel AVX512_FP16 instructions. * Add -z pack-relative-relocs/-z no pack-relative-relocs to x86 ELF linker to pack relative relocations in the DT_RELR section. * Add support for the LoongArch architecture. * Add -z indirect-extern-access/-z noindirect-extern-access to x86 ELF linker to control canonical function pointers and copy relocation. * Add --max-cache-size=SIZE to set the the maximum cache size to SIZE bytes. - Add binutils-2.38-branch.diff.gz. - Removed deletion of man pages as they should be properly packages in tarball. - Rebased patches: aarch64-common-pagesize.patch, add-ulp-section.diff, binutils-bfd_h.patch, binutils-revert-nm-symversion.diff, binutils-revert-plt32-in-branches.diff, binutils-skip-rpaths.patch and binutils-compat-old-behaviour.diff. ------------------------------------------------------------------- Fri Feb 4 13:13:20 UTC 2022 - Matwey Kornilov - Enable PRU architecture for AM335x CPU (Beagle Bone Black board) ------------------------------------------------------------------- Thu Jan 27 20:36:30 UTC 2022 - Dirk Müller - use fdupes on datadir - remove RPM_BUILD_ROOT usage and other cleanups ------------------------------------------------------------------- Fri Nov 12 13:20:09 UTC 2021 - Martin Liška - Rebase binutils-2.37-branch.diff: fixes PR28494. ------------------------------------------------------------------- Fri Nov 5 16:54:36 UTC 2021 - Michael Matz - Add binutils-revert-hlasm-insns.diff for compatibility on old code stream that expect 'brcl 0,label' to not be disassembled as 'jgnop label' on s390x. [bsc#1192267] ------------------------------------------------------------------- Wed Nov 3 08:23:52 UTC 2021 - Martin Liška - Rebase binutils-2.37-branch.diff: fixes PR28523 aka boo#1188941. ------------------------------------------------------------------- Tue Nov 2 15:57:53 UTC 2021 - Michael Matz - Fix empty man-pages from broken release tarball [PR28144]. ------------------------------------------------------------------- Mon Nov 1 09:34:38 UTC 2021 - Martin Liška - Update binutils-skip-rpaths.patch with contained a memory corruption (boo#1191473). ------------------------------------------------------------------- Fri Oct 8 14:11:44 UTC 2021 - Michael Matz - Configure with --disable-x86-used-note on old code streams. - Disable libalternatives temporarily for build cycle reasons. - make TARGET-bfd=headers again, we patch bfd-in.h - This state submitted to SLE12 and SLE15 code streams for annual toolchain update. [jsc#PM-2767, jsc#SLE-21561, jsc#SLE-19618] - Bump binutils-2.37-branch.diff to 66d5c7003, to include fixes for PR28422, PR28192, PR28391. Also adds some s390x arch14 instructions [jsc#SLE-18637]. ------------------------------------------------------------------- Fri Sep 10 23:16:12 CEST 2021 - Stefan Schubert schubi@suse.de - Using libalternatives instead of update-alternatives. ------------------------------------------------------------------- Wed Sep 8 15:09:58 UTC 2021 - Michael Matz - Adjust for testsuite fails on older products that configure binutils in different ways, adds binutils-compat-old-behaviour.diff and adjusts binutils-revert-nm-symversion.diff and binutils-revert-plt32-in-branches.diff. ------------------------------------------------------------------- Tue Aug 3 13:36:19 UTC 2021 - Martin Liška - Bump binutils-2.37-branch.diff: fixes PR28138. ------------------------------------------------------------------- Thu Jul 22 17:36:14 UTC 2021 - Martin Liška - Use LTO & PGO build. ------------------------------------------------------------------- Thu Jul 22 15:01:27 UTC 2021 - Martin Liška - Update to binutils 2.37: * The GNU Binutils sources now requires a C99 compiler and library to build. * Support for the arm-symbianelf format has been removed. * Support for Realm Management Extension (RME) for AArch64 has been added. * A new linker option '-z report-relative-reloc' for x86 ELF targets has been added to report dynamic relative relocations. * A new linker option '-z start-stop-gc' has been added to disable special treatment of __start_*/__stop_* references when --gc-sections. * A new linker options '-Bno-symbolic' has been added which will cancel the '-Bsymbolic' and '-Bsymbolic-functions' options. * The readelf tool has a new command line option which can be used to specify how the numeric values of symbols are reported. --sym-base=0|8|10|16 tells readelf to display the values in base 8, base 10 or base 16. A sym base of 0 represents the default action of displaying values under 10000 in base 10 and values above that in base 16. * A new format has been added to the nm program. Specifying '--format=just-symbols' (or just using -j) will tell the program to only display symbol names and nothing else. * A new command line option '--keep-section-symbols' has been added to objcopy and strip. This stops the removal of unused section symbols when the file is copied. Removing these symbols saves space, but sometimes they are needed by other tools. * The '--weaken', '--weaken-symbol' and '--weaken-symbols' options supported by objcopy now make undefined symbols weak on targets that support weak symbols. * Readelf and objdump can now display and use the contents of .debug_sup sections. * Readelf and objdump will now follow links to separate debug info files by default. This behaviour can be stopped via the use of the new '-wN' or '--debug-dump=no-follow-links' options for readelf and the '-WN' or '--dwarf=no-follow-links' options for objdump. Also the old behaviour can be restored by the use of the '--enable-follow-debug-links=no' configure time option. The semantics of the =follow-links option have also been slightly changed. When enabled, the option allows for the loading of symbol tables and string tables from the separate files which can be used to enhance the information displayed when dumping other sections, but it does not automatically imply that information from the separate files should be displayed. If other debug section display options are also enabled (eg '--debug-dump=info') then the contents of matching sections in both the main file and the separate debuginfo file *will* be displayed. This is because in most cases the debug section will only be present in one of the files. If however non-debug section display options are enabled (eg '--sections') then the contents of matching parts of the separate debuginfo file will *not* be displayed. This is because in most cases the user probably only wanted to load the symbol information from the separate debuginfo file. In order to change this behaviour a new command line option --process-links can be used. This will allow di0pslay options to applied to both the main file and any separate debuginfo files. * Nm has a new command line option: '--quiet'. This suppresses "no symbols" diagnostic. - Includes fixes for these CVEs: bnc#1181452 aka CVE-2021-20197 aka PR26945 bnc#1183511 aka CVE-2021-20284 aka PR26931 bnc#1184519 aka CVE-2021-20294 aka PR26929 bnc#1184620 aka CVE-2021-3487 aka PR26946 bnc#1184794 aka CVE-2020-35448 aka PR26574 - Also fixes: bsc#1183909 - slow performance of stripping some binaries - Rebased patches: binutils-build-as-needed.diff, binutils-fix-abierrormsg.diff, binutils-fix-invalid-op-errata.diff, binutils-fix-relax.diff, binutils-revert-nm-symversion.diff, binutils-revert-plt32-in-branches.diff - Removed patches (are in upstream): ppc-ensure-undef-dynamic-weak-undefined.patch and ppc-use-local-plt.patch. - Add binutils-2.37-branch.diff.gz. ------------------------------------------------------------------- Fri May 7 15:34:22 UTC 2021 - Andreas Schwab - ppc-ensure-undef-dynamic-weak-undefined.patch: PPC: ensure_undef_dynamic on weak undef only in plt - ppc-use-local-plt.patch: PowerPC use_local_plt (prerequisite for above patch) ------------------------------------------------------------------- Fri Mar 26 10:06:58 UTC 2021 - Martin Liška - Update 2.36 branch diff which fixes PR27587. ------------------------------------------------------------------- Wed Mar 3 12:53:27 UTC 2021 - Martin Liška - Do not run make TARGET-bfd=headers separately. ------------------------------------------------------------------- Mon Mar 1 09:01:59 UTC 2021 - Martin Liška - Bump 2.36 branch diff (includes fix for PR27441 aka bsc#1182252). ------------------------------------------------------------------- Thu Feb 4 08:40:53 UTC 2021 - Martin Liška - Bump 2.36 branch diff. ------------------------------------------------------------------- Wed Feb 3 08:39:37 UTC 2021 - Martin Liška - Update 2.36 branch diff which should fix PR27311 completely. It fixes also PR27284. - Remove temporary fix 0001-PR27311-ld.bfd-symbol-from-plugin-undefined-referenc.patch. ------------------------------------------------------------------- Tue Feb 2 13:07:22 UTC 2021 - Martin Liška - Add temporary upstream fix for PR27311 0001-PR27311-ld.bfd-symbol-from-plugin-undefined-referenc.patch. ------------------------------------------------------------------- Sun Jan 24 16:56:39 UTC 2021 - Martin Liška - Update to binutils 2.36: New features in the Assembler: General: * When setting the link order attribute of ELF sections, it is now possible to use a numeric section index instead of symbol name. * Added a .nop directive to generate a single no-op instruction in a target neutral manner. This instruction does have an effect on DWARF line number generation, if that is active. * Removed --reduce-memory-overheads and --hash-size as gas now uses hash tables that can be expand and shrink automatically. X86/x86_64: * Add support for AVX VNNI, HRESET, UINTR, TDX, AMX and Key Locker instructions. * Support non-absolute segment values for lcall and ljmp. * Add {disp16} pseudo prefix to x86 assembler. * Configure with --enable-x86-used-note by default for Linux/x86. ARM/AArch64: * Add support for Cortex-A78, Cortex-A78AE and Cortex-X1, Cortex-R82, Neoverse V1, and Neoverse N2 cores. * Add support for ETMv4 (Embedded Trace Macrocell), ETE (Embedded Trace Extension), TRBE (Trace Buffer Extension), CSRE (Call Stack Recorder Extension) and BRBE (Branch Record Buffer Extension) system registers. * Add support for Armv8-R and Armv8.7-A ISA extensions. * Add support for DSB memory nXS barrier, WFET and WFIT instruction for Armv8.7. * Add support for +csre feature for -march. Add CSR PDEC instruction for CSRE feature in AArch64. * Add support for +flagm feature for -march in Armv8.4 AArch64. * Add support for +ls64 feature for -march in Armv8.7 AArch64. Add atomic 64-byte load/store instructions for this feature. * Add support for +pauth (Pointer Authentication) feature for -march in AArch64. New features in the Linker: * Add --error-handling-script= command line option to allow a helper script to be invoked when an undefined symbol or a missing library is encountered. This option can be suppressed via the configure time switch: --enable-error-handling-script=no. * Add -z x86-64-{baseline|v[234]} to the x86 ELF linker to mark x86-64-{baseline|v[234]} ISA level as needed. * Add -z unique-symbol to avoid duplicated local symbol names. * The creation of PE format DLLs now defaults to using a more secure set of DLL characteristics. * The linker now deduplicates the types in .ctf sections. The new command-line option --ctf-share-types describes how to do this: its default value, share-unconflicted, produces the most compact output. * The linker now omits the "variable section" from .ctf sections by default, saving space. This is almost certainly what you want unless you are working on a project that has its own analogue of symbol tables that are not reflected in the ELF symtabs. New features in other binary tools: * The ar tool's previously unused l modifier is now used for specifying dependencies of a static library. The arguments of this option (or --record-libdeps long form option) will be stored verbatim in the __.LIBDEP member of the archive, which the linker may read at link time. * Readelf can now display the contents of LTO symbol table sections when asked to do so via the --lto-syms command line option. * Readelf now accepts the -C command line option to enable the demangling of symbol names. In addition the --demangle=