Accepting request 714642 from home:develop7:branches:network:cryptocurrencies

Update to version 0.18.0

OBS-URL: https://build.opensuse.org/request/show/714642
OBS-URL: https://build.opensuse.org/package/show/network:cryptocurrencies/bitcoin?expand=0&rev=21

bitcoin-0.17.1.tar.gz

@@ -1,3 +0,0 @@
-version https://git-lfs.github.com/spec/v1
-oid sha256:d51bae80fc0a460ce752d04097c4a1271a66b55260d53165d82313488117d290
-size 6219440

bitcoin-0.18.0.tar.gz

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:5e4e6890e07b620a93fdb24605dae2bb53e8435b2a93d37558e1db1913df405f
+size 7253176

bitcoin.changes

@@ -1,3 +1,9 @@
+-------------------------------------------------------------------
+Thu Jul 11 11:41:01 UTC 2019 - Andrei Dziahel <develop7@develop7.info>
+
+- Update to version 0.18.0
+  See release-notes.md for complete list of changes
+
 -------------------------------------------------------------------
 Wed Jul 10 09:51:31 UTC 2019 - matthias.gerstner@suse.com
 

bitcoin.conf

@@ -0,0 +1,144 @@
+##
+## bitcoin.conf configuration file. Lines beginning with # are comments.
+##
+ 
+# Network-related settings:
+
+# Run on the test network instead of the real bitcoin network.
+#testnet=0
+
+# Run a regression test network
+#regtest=0
+
+# Connect via a SOCKS5 proxy
+#proxy=127.0.0.1:9050
+
+# Bind to given address and always listen on it. Use [host]:port notation for IPv6
+#bind=<addr>
+
+# Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6
+#whitebind=<addr>
+
+##############################################################
+##            Quick Primer on addnode vs connect            ##
+##  Let's say for instance you use addnode=4.2.2.4          ##
+##  addnode will connect you to and tell you about the      ##
+##    nodes connected to 4.2.2.4.  In addition it will tell ##
+##    the other nodes connected to it that you exist so     ##
+##    they can connect to you.                              ##
+##  connect will not do the above when you 'connect' to it. ##
+##    It will *only* connect you to 4.2.2.4 and no one else.##
+##                                                          ##
+##  So if you're behind a firewall, or have other problems  ##
+##  finding nodes, add some using 'addnode'.                ##
+##                                                          ##
+##  If you want to stay private, use 'connect' to only      ##
+##  connect to "trusted" nodes.                             ##
+##                                                          ##
+##  If you run multiple nodes on a LAN, there's no need for ##
+##  all of them to open lots of connections.  Instead       ##
+##  'connect' them all to one node that is port forwarded   ##
+##  and has lots of connections.                            ##
+##       Thanks goes to [Noodle] on Freenode.               ##
+##############################################################
+
+# Use as many addnode= settings as you like to connect to specific peers
+#addnode=69.164.218.197
+#addnode=10.0.0.2:8333
+
+# Alternatively use as many connect= settings as you like to connect ONLY to specific peers
+#connect=69.164.218.197
+#connect=10.0.0.1:8333
+
+# Listening mode, enabled by default except when 'connect' is being used
+#listen=1
+
+# Maximum number of inbound+outbound connections.
+#maxconnections=
+
+#
+# JSON-RPC options (for controlling a running Bitcoin/bitcoind process)
+#
+
+# server=1 tells Bitcoin-Qt and bitcoind to accept JSON-RPC commands
+#server=0
+
+# Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6.
+# This option can be specified multiple times (default: bind to all interfaces)
+#rpcbind=<addr>
+
+# If no rpcpassword is set, rpc cookie auth is sought. The default `-rpccookiefile` name
+# is .cookie and found in the `-datadir` being used for bitcoind. This option is typically used
+# when the server and client are run as the same user.
+#
+# If not, you must set rpcuser and rpcpassword to secure the JSON-RPC API.
+#
+# The config option `rpcauth` can be added to server startup argument. It is set at initialization time
+# using the output from the script in share/rpcauth/rpcauth.py after providing a username:
+#
+# ./share/rpcauth/rpcauth.py alice
+# String to be appended to bitcoin.conf:
+# rpcauth=alice:f7efda5c189b999524f151318c0c86$d5b51b3beffbc02b724e5d095828e0bc8b2456e9ac8757ae3211a5d9b16a22ae
+# Your password:
+# DONT_USE_THIS_YOU_WILL_GET_ROBBED_8ak1gI25KFTvjovL3gAM967mies3E=
+#
+# On client-side, you add the normal user/password pair to send commands:
+#rpcuser=alice
+#rpcpassword=DONT_USE_THIS_YOU_WILL_GET_ROBBED_8ak1gI25KFTvjovL3gAM967mies3E=
+#
+# You can even add multiple entries of these to the server conf file, and client can use any of them:
+# rpcauth=bob:b2dd077cb54591a2f3139e69a897ac$4e71f08d48b4347cf8eff3815c0e25ae2e9a4340474079f55705f40574f4ec99
+
+# How many seconds bitcoin will wait for a complete RPC HTTP request.
+# after the HTTP connection is established. 
+#rpcclienttimeout=30
+
+# By default, only RPC connections from localhost are allowed.
+# Specify as many rpcallowip= settings as you like to allow connections from other hosts,
+# either as a single IPv4/IPv6 or with a subnet specification.
+
+# NOTE: opening up the RPC port to hosts outside your local trusted network is NOT RECOMMENDED,
+# because the rpcpassword is transmitted over the network unencrypted.
+
+# server=1 tells Bitcoin-Qt to accept JSON-RPC commands.
+# it is also read by bitcoind to determine if RPC should be enabled 
+#rpcallowip=10.1.1.34/255.255.255.0
+#rpcallowip=1.2.3.4/24
+#rpcallowip=2001:db8:85a3:0:0:8a2e:370:7334/96
+
+# Listen for RPC connections on this TCP port:
+#rpcport=8332
+
+# You can use Bitcoin or bitcoind to send commands to Bitcoin/bitcoind
+# running on another host using this option:
+#rpcconnect=127.0.0.1
+
+# Wallet options
+
+# Create transactions that have enough fees so they are likely to begin confirmation within n blocks (default: 6).
+# This setting is over-ridden by the -paytxfee option.
+#txconfirmtarget=n
+
+# Pay a transaction fee every time you send bitcoins.
+#paytxfee=0.000x
+
+# Miscellaneous options
+
+# Pre-generate this many public/private key pairs, so wallet backups will be valid for
+# both prior transactions and several dozen future transactions.
+#keypool=100
+
+# Enable pruning to reduce storage requirements by deleting old blocks. 
+# This mode is incompatible with -txindex and -rescan.
+# 0 = default (no pruning).
+# 1 = allows manual pruning via RPC.
+# >=550 = target to stay under in MiB. 
+#prune=550
+
+# User interface options
+
+# Start Bitcoin minimized
+#min=1
+
+# Minimize to the system tray
+#minimizetotray=1

bitcoin.spec

@@ -13,7 +13,7 @@
 # license that conforms to the Open Source Definition (Version 1.9)
 # published by the Open Source Initiative.
 
-# Please submit bugfixes or comments via http://bugs.opensuse.org/
+# Please submit bugfixes or comments via https://bugs.opensuse.org/
 #
 
 
@@ -24,7 +24,7 @@
 %define consensus 1
 %define is_base 1
 Name:           bitcoin
-Version:        0.17.1
+Version:        0.18.0
 Release:        0
 Summary:        P2P Digital Currency
 License:        MIT
@@ -33,6 +33,7 @@ URL:            https://%{name}.org
 Source0:        https://github.com/%{name}/%{name}/archive/v%{version}.tar.gz#/%{name}-%{version}.tar.gz
 Source1:        %{base}d.service
 Source3:        %{base}d.conf
+Source4:        %{base}.conf
 BuildRequires:  autoconf
 BuildRequires:  automake
 BuildRequires:  gcc-c++
@@ -58,6 +59,7 @@ BuildRequires:  pkgconfig(python3)
 %if 0%{?suse_version} > 1315
 BuildRequires:  libboost_filesystem-devel
 BuildRequires:  libboost_program_options-devel
+BuildRequires:  libboost_system-devel
 BuildRequires:  libboost_test-devel
 BuildRequires:  libboost_thread-devel
 %else
@@ -187,17 +189,15 @@ export LDFLAGS="-pie"
 make %{?_smp_mflags} V=1
 
 %check
-make %{?_smp_mflags} check
+make %{?_smp_mflags} LC_ALL=C.UTF-8 check
 
 %install
 %make_install
 
-install -Dpm 0644 share/pixmaps/%{base}256.png %{buildroot}%{_datadir}/pixmaps/%{name}.png
-
 install -Dpm 0644 doc/man/%{name}d.1 %{buildroot}%{_mandir}/man1/%{name}d.1
 install -Dpm 0644 doc/man/%{name}-qt.1 %{buildroot}%{_mandir}/man1/%{name}-qt.1
 
-install -Dpm 0644 share/examples/bitcoin.conf %{buildroot}%{_sysconfdir}/%{name}/%{name}.conf
+install -Dpm 0644 %{SOURCE4} %{buildroot}%{_sysconfdir}/%{name}/%{name}.conf
 
 %if !%{is_base}
 sed -i "s/%{base}/%{name}/g" %{SOURCE1}
@@ -254,28 +254,28 @@ systemd-tmpfiles --create %{_tmpfilesdir}/%{name}d.conf >/dev/null 2>&1 || :
 
 %files qt5
 %license COPYING
-%doc README.md doc/release-notes.md
+%doc doc/README.md doc/release-notes.md
 %{_bindir}/%{name}-qt
 %{_mandir}/man1/%{name}-qt.1%{?ext_man}
-%{_datadir}/pixmaps/%{name}.png
 
 %files utils
 %license COPYING
-%doc README.md doc/release-notes.md
+%doc doc/README.md doc/release-notes.md
 %{_bindir}/%{name}-cli
 %{_bindir}/%{name}-tx
+%{_bindir}/%{name}-wallet
 %{_mandir}/man1/bitcoin-cli.1%{?ext_man}
 %{_mandir}/man1/bitcoin-tx.1%{?ext_man}
 
 %if %{consensus} == 1
 %files -n lib%{name}consensus0
 %license COPYING
-%doc README.md doc/release-notes.md
+%doc doc/README.md doc/release-notes.md
 %{_libdir}/lib%{name}consensus.so.*
 
 %files -n lib%{name}consensus-devel
 %license COPYING
-%doc README.md
+%doc doc/README.md
 %{_libdir}/lib%{name}consensus.so
 %{_includedir}/%{name}consensus.h
 %{_libdir}/pkgconfig/lib%{name}consensus.pc
@@ -283,7 +283,7 @@ systemd-tmpfiles --create %{_tmpfilesdir}/%{name}d.conf >/dev/null 2>&1 || :
 
 %files -n %{name}d
 %license COPYING
-%doc README.md doc/release-notes.md
+%doc doc/README.md doc/release-notes.md
 %{_mandir}/man1/%{name}d.1%{?ext_man}
 %{_bindir}/%{name}d
 %dir %attr(700,%{name},%{name}) %{_var}/lib/%{name}
@@ -295,7 +295,7 @@ systemd-tmpfiles --create %{_tmpfilesdir}/%{name}d.conf >/dev/null 2>&1 || :
 
 %files test
 %license COPYING
-%doc README.md doc/release-notes.md
+%doc doc/README.md doc/release-notes.md
 %{_bindir}/test_%{name}
 %{_bindir}/test_%{name}-qt
 %{_bindir}/bench_%{name}