rpm/coreutils
SHA256
1
0
Fork 0
forked from pool/coreutils
Code Pull Requests Activity
26149f3250
coreutils/coreutils-fix-gnulib-time_r-tests.patch
Bernhard Voelker e62f2bf92f Accepting request 1163997 from home:berny:branches:Base:System 
- Update to 9.5:
  Bug fixes:
  * chmod -R now avoids a race where an attacker may replace a traversed file
    with a symlink, causing chmod to operate on an unintended file.
    [This bug was present in "the beginning".]
  * cp, mv, and install no longer issue spurious diagnostics like "failed
    to preserve ownership" when copying to GNU/Linux CIFS file systems.
    They do this by working around some Linux CIFS bugs.
  * cp --no-preserve=mode will correctly maintain set-group-ID bits
    for created directories.  Previously on systems that didn't support ACLs,
    cp would have reset the set-group-ID bit on created directories.
    [bug introduced in coreutils-8.20]
  * join and uniq now support multi-byte characters better.
    For example, 'join -tX' now works even if X is a multi-byte character,
    and both programs now treat multi-byte characters like U+3000
    IDEOGRAPHIC SPACE as blanks if the current locale treats them so.
  * numfmt options like --suffix no longer have an arbitrary 127-byte limit.
    [bug introduced with numfmt in coreutils-8.21]
  * mktemp with --suffix now better diagnoses templates with too few X's.
    Previously it conflated the insignificant --suffix in the error.
    [bug introduced in coreutils-8.1]
  * sort again handles thousands grouping characters in single-byte locales
    where the grouping character is greater than CHAR_MAX.  For e.g. signed
    character platforms with a 0xA0 (aka &nbsp) grouping character.
    [bug introduced in coreutils-9.1]
  * split --line-bytes with a mixture of very long and short lines
    no longer overwrites the heap (CVE-2024-0684).
    [bug introduced in coreutils-9.2]
  * tail no longer mishandles input from files in /proc and /sys file systems,
    on systems with a page size larger than the stdio BUFSIZ.
    [This bug was present in "the beginning".]
  * timeout avoids a narrow race condition, where it might kill arbitrary
    processes after a failed process fork.
    [bug introduced with timeout in coreutils-7.0]
  * timeout avoids a narrow race condition, where it might fail to
    kill monitored processes immediately after forking them.
    [bug introduced with timeout in coreutils-7.0]
  * wc no longer fails to count unprintable characters as parts of words.
    [bug introduced in textutils-2.1]
  Changes in behavior:
  * base32 and base64 no longer require padding when decoding.
    Previously an error was given for non padded encoded data.
  * base32 and base64 have improved detection of corrupted encodings.
    Previously encodings with non zero padding bits were accepted.
  * basenc --base16 -d now supports lower case hexadecimal characters.
    Previously an error was given for lower case hex digits.
  * cp --no-clobber, and mv -n no longer exit with failure status if
    existing files are encountered in the destination.  Instead they revert
    to the behavior from before v9.2, silently skipping existing files.
  * ls --dired now implies long format output without hyperlinks enabled,
    and will take precedence over previously specified formats or hyperlink
    mode.
  * numfmt will accept lowercase 'k' to indicate Kilo or Kibi units on input,
    and uses lowercase 'k' when outputting such units in '--to=si' mode.
  * pinky no longer tries to canonicalize the user's login location by default,
    rather requiring the new --lookup option to enable this often slow feature.
  * wc no longer ignores encoding errors when counting words.
    Instead, it treats them as non white space.
  New features:
  * chgrp now accepts the --from=OWNER:GROUP option to restrict changes to files
    with matching current OWNER and/or GROUP, as already supported by chown(1).
  * chmod adds support for -h, -H,-L,-P, and --dereference options, providing
    more control over symlink handling.  This supports more secure handling of
    CLI arguments, and is more consistent with chown, and chmod on other
    systems.
  * cp now accepts the --keep-directory-symlink option (like tar), to preserve
    and follow existing symlinks to directories in the destination.
  * cp and mv now accept the --update=none-fail option, which is similar
    to the --no-clobber option, except that existing files are diagnosed,
    and the command exits with failure status if existing files.
    The -n,--no-clobber option is best avoided due to platform differences.
  * env now accepts the -a,--argv0 option to override the zeroth argument
    of the command being executed.
  * mv now accepts an --exchange option, which causes the source and
    destination to be exchanged.  It should be combined with
    --no-target-directory (-T) if the destination is a directory.
    The exchange is atomic if source and destination are on a single
    file system that supports atomic exchange; --exchange is not yet
    supported in other situations.
  * od now supports printing IEEE half precision floating point with -t fH,
    or brain 16 bit floating point with -t fB, where supported by the compiler.
  * tail now supports following multiple processes, with repeated --pid options.
  Improvements:
  * cp,mv,install,cat,split now read and write a minimum of 256KiB at a time.
    This was previously 128KiB and increasing to 256KiB was seen to increase
    throughput by 10-20% when reading cached files on modern systems.
  * env,kill,timeout now support unnamed signals. kill(1) for example now
    supports sending such signals, and env(1) will list them appropriately.
  * SELinux operations in file copy operations are now more efficient,
    avoiding unneeded MCS/MLS label translation.
  * sort no longer dynamically links to libcrypto unless -R is used.
    This decreases startup overhead in the typical case.
  * wc is now much faster in single-byte locales and somewhat faster in
    multi-byte locales.
- coreutils-9.4.split-CVE-2024-0684.patch: Remove now-upstream patch.
- gnulib-readutmp-under-gdm.patch: Likewise.
- gnulib-readutmp.patch: Likewise.
- coreutils-i18n.patch: Remove multi-byte patches for join and uniq, as the
  upstream version now handles those tests.
  Pull in gnulib module mbchar manually, as it is a dependency of mbfile,
  but dropped out of the upstream dependency chain.
- coreutils-misc.patch: Remove change for gnulib-tests/test-isnanl.h.
- coreutils-fix-gnulib-time_r-tests.patch: Add upstream gnulib patch to skip
  French test if TZ='Europe/Paris' does not work.

OBS-URL: https://build.opensuse.org/request/show/1163997
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=362
2024-04-02 15:30:19 +00:00

96 lines
3.2 KiB
Diff
Raw Blame History

2 upstream gnulib commits for coreutils-9.5 to skip localtime_r tests
when the timezone 'Europe/Paris' does not work.
Commit 1:
http://git.sv.gnu.org/cgit/gnulib.git/commit/?id=f130f5426ecd4edd559
From f130f5426ecd4edd5596797e0a5721b927f80126 Mon Sep 17 00:00:00 2001
From: Paul Eggert <eggert@cs.ucla.edu>
Date: Sat, 30 Mar 2024 13:28:01 -0600
Subject: [PATCH 1/2] time_r-tests: skip French tests if no Europe/Paris
* tests/test-localtime_r.c (main):
* tests/test-localtime_r-mt.c (main):
If TZ='Europe/Paris' does not work, skip these tests.
Commit 2:
http://git.sv.gnu.org/cgit/gnulib.git/commit/?id=2c04db80e2c52b8f05b
From 2c04db80e2c52b8f05b4136af955510e7d370470 Mon Sep 17 00:00:00 2001
From: Bruno Haible <bruno@clisp.org>
Date: Sat, 30 Mar 2024 22:50:39 +0100
Subject: [PATCH 2/2] time_r tests: Avoid misleading skip message on native
Windows.
* tests/test-localtime_r.c (main): Use the macro FRENCH_TZ.
* tests/test-localtime_r-mt.c (main): Likewise.
---
gnulib-tests/test-localtime_r-mt.c | 21 +++++++++++++++++++++
gnulib-tests/test-localtime_r.c | 21 +++++++++++++++++++++
2 files changed, 42 insertions(+)
Index: gnulib-tests/test-localtime_r-mt.c
===================================================================
--- gnulib-tests/test-localtime_r-mt.c.orig
+++ gnulib-tests/test-localtime_r-mt.c
@@ -107,6 +107,27 @@ main (int argc, char *argv[])
{
setenv ("TZ", FRENCH_TZ, 1);
+ /* Check that this TZ works. */
+ {
+ time_t t = 0; /* 1970-01-01 01:00:00 */
+ struct tm *result = localtime (&t);
+ if (! (result
+ && result->tm_sec == 0
+ && result->tm_min == 0
+ && result->tm_hour == 1
+ && result->tm_mday == 1
+ && result->tm_mon == 1 - 1
+ && result->tm_year == 1970 - 1900
+ && result->tm_wday == 4
+ && result->tm_yday == 0
+ && result->tm_isdst == 0))
+ {
+ fputs ("Skipping test: TZ='" FRENCH_TZ "' is not Paris time\n",
+ stderr);
+ return 77;
+ }
+ }
+
/* Create the threads. */
gl_thread_create (thread1_func, NULL);
gl_thread_create (thread2_func, NULL);
Index: gnulib-tests/test-localtime_r.c
===================================================================
--- gnulib-tests/test-localtime_r.c.orig
+++ gnulib-tests/test-localtime_r.c
@@ -43,6 +43,27 @@ main (void)
{
setenv ("TZ", FRENCH_TZ, 1);
+ /* Check that this TZ works. */
+ {
+ time_t t = 0; /* 1970-01-01 01:00:00 */
+ struct tm *result = localtime (&t);
+ if (! (result
+ && result->tm_sec == 0
+ && result->tm_min == 0
+ && result->tm_hour == 1
+ && result->tm_mday == 1
+ && result->tm_mon == 1 - 1
+ && result->tm_year == 1970 - 1900
+ && result->tm_wday == 4
+ && result->tm_yday == 0
+ && result->tm_isdst == 0))
+ {
+ fputs ("Skipping test: TZ='" FRENCH_TZ "' is not Paris time\n",
+ stderr);
+ return 77;
+ }
+ }
+
/* Note: The result->tm_gmtoff values and the result->tm_zone values are the
same (3600, "CET" or 7200, "CEST") across all tested platforms:
glibc, musl, macOS, FreeBSD, NetBSD, OpenBSD, Minix, Cygwin, Android. */
View Git Blame Copy Permalink