diff --git a/courier-imap-5.0.12.tar.bz2 b/courier-imap-5.0.12.tar.bz2 deleted file mode 100644 index 948071a..0000000 --- a/courier-imap-5.0.12.tar.bz2 +++ /dev/null @@ -1,3 +0,0 @@ -version https://git-lfs.github.com/spec/v1 -oid sha256:dd210f27f7d034721802f4d07a5b8f69aa875a86589211fabe87fd91df5073de -size 3359074 diff --git a/courier-imap-5.0.12.tar.bz2.sig b/courier-imap-5.0.12.tar.bz2.sig deleted file mode 100644 index 0e2194c..0000000 Binary files a/courier-imap-5.0.12.tar.bz2.sig and /dev/null differ diff --git a/courier-imap-5.0.14.tar.bz2 b/courier-imap-5.0.14.tar.bz2 new file mode 100644 index 0000000..3df9206 --- /dev/null +++ b/courier-imap-5.0.14.tar.bz2 @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:671a6a64c2d46e515097979b4488b8284d0260eabdff56ff81ef66cf1f6169c3 +size 3359363 diff --git a/courier-imap-5.0.14.tar.bz2.sig b/courier-imap-5.0.14.tar.bz2.sig new file mode 100644 index 0000000..93259b5 Binary files /dev/null and b/courier-imap-5.0.14.tar.bz2.sig differ diff --git a/courier-imap-config.patch b/courier-imap-config.patch new file mode 100644 index 0000000..be3b213 --- /dev/null +++ b/courier-imap-config.patch @@ -0,0 +1,84 @@ +diff -purN libs/imap/imapd.dist.in libs/imap/imapd.dist.in +--- libs/imap/imapd.dist.in 2021-03-01 13:29:08.000000000 +0100 ++++ libs/imap/imapd.dist.in 2021-03-02 08:28:34.862607943 +0100 +@@ -21,7 +21,7 @@ + # + # ADDRESS=127.0.0.1 + +-ADDRESS=0 ++ADDRESS=127.0.0.1 + + ##NAME: PORT:1 + # +@@ -57,7 +57,7 @@ MAXDAEMONS=40 + # + # Maximum number of connections to accept from the same IP address + +-MAXPERIP=4 ++MAXPERIP=20 + + ##NAME: PIDFILE:0 + # +@@ -480,7 +480,7 @@ HEADERFROM=X-IMAP-Sender + # The default setting is going to be NO, so you'll have to manually flip + # it to yes. + +-IMAPDSTART=NO ++IMAPDSTART=YES + + ##NAME: MAILDIRPATH:0 + # +diff -purN libs/imap/imapd-ssl.dist.in libs/imap/imapd-ssl.dist.in +--- libs/imap/imapd-ssl.dist.in 2021-03-01 13:29:07.000000000 +0100 ++++ libs/imap/imapd-ssl.dist.in 2021-03-02 08:30:10.370603684 +0100 +@@ -72,7 +72,7 @@ SSLLOGGEROPTS="-name=imapd-ssl" + # + # Whether or not to start IMAP over SSL on simap port: + +-IMAPDSSLSTART=NO ++IMAPDSSLSTART=YES + + ##NAME: IMAPDSTARTTLS:0 + # +@@ -313,7 +313,7 @@ TLS_VERIFYPEER=NONE + # automatically created, TLS_CACHESIZE bytes long, and used as a cache + # buffer. + +-TLS_CACHEFILE=@localstatedir@/couriersslpop3cache ++TLS_CACHEFILE=@localstatedir@/cache/courier/sslpop3cache + TLS_CACHESIZE=524288 + + ##NAME: MAILDIRPATH:0 +diff -purN libs/imap/pop3d.dist.in libs/imap/pop3d.dist.in +--- libs/imap/pop3d.dist.in 2021-03-01 13:29:08.000000000 +0100 ++++ libs/imap/pop3d.dist.in 2021-03-02 08:31:18.846600632 +0100 +@@ -146,7 +146,7 @@ LOGGEROPTS="-name=pop3d" + # with enough platforms so that people get annoyed with having to flip it to + # YES every time. + +-POP3DSTART=NO ++POP3DSTART=YES + + ##NAME: POP3_LOG_DELETIONS:0 + # +diff -purN libs/imap/pop3d-ssl.dist.in libs/imap/pop3d-ssl.dist.in +--- libs/imap/pop3d-ssl.dist.in 2021-03-01 13:29:07.000000000 +0100 ++++ libs/imap/pop3d-ssl.dist.in 2021-03-02 08:32:03.754598629 +0100 +@@ -61,7 +61,7 @@ SSLLOGGEROPTS="-name=pop3d-ssl" + # + # Whether or not to start POP3 over SSL on spop3 port: + +-POP3DSSLSTART=NO ++POP3DSSLSTART=YES + + ##NAME: POP3_STARTTLS:0 + # +@@ -310,7 +310,7 @@ TLS_VERIFYPEER=NONE + # problems with SSL clients. Disable SSL caching by commenting out the + # following settings: + +-TLS_CACHEFILE=@localstatedir@/couriersslimapcache ++TLS_CACHEFILE=@localstatedir@/cache/courier/sslimapcache + TLS_CACHESIZE=524288 + + ##NAME: MAILDIRPATH:0 diff --git a/courier-imap-ssl.init b/courier-imap-ssl.init deleted file mode 100644 index 8a79721..0000000 --- a/courier-imap-ssl.init +++ /dev/null @@ -1,146 +0,0 @@ -#! /bin/sh -# Copyright (c) 2005 SUSE LINUX Products GmbH, Nuernberg, Germany. -# All rights reserved. -# -# Author: Thorsten Kukuk -# -# /etc/init.d/courier-imap-ssl -# -### BEGIN INIT INFO -# Provides: courier-imap-ssl -# Required-Start: $syslog $remote_fs courier-authdaemon -# Should-Start: -# Required-Stop: $syslog $remote_fs -# Should-Stop: -# Default-Start: 3 5 -# Default-Stop: 0 1 2 6 -# Short-Description: Courier-IMAP server for SSL connections -# Description: Start the Courier-IMAP server, which is an -# IMAP server for Maildir mailboxes. This -# version only accepts SSL connections. -### END INIT INFO - -# Check for missing binaries (stale symlinks should not happen) -IMAP_BIN=/usr/sbin/imapd -test -x $IMAP_BIN || exit 5 - -. /etc/rc.status - -# Read configuration -TLS_CACHEFILE="" -. /etc/courier/imapd -. /etc/courier/imapd-ssl -test "$MAILDIRPATH" == "" && MAILDIRPATH=Maildir -test "$PIDFILE" == "" && PIDFILE=/var/run/imapd.pid -test "$SSLPIDFILE" == "" && SSLPIDFILE=/var/run/imapd-ssl.pid -LOCKFILE=${SSLPIDFILE}.lock - -# Reset status of this service -rc_reset - -# our version of check_proc -#IN: $PIDFILE $LOCKFILE -check_proc(){ - # check for process - ps auxw | grep -v grep | grep $1 >/dev/null - RET=$? - if [ $RET = "1" ]; then - if [ -f $1 ]; then - ERR=1 - elif [ -f $2 ]; then - ERR=2 - else - ERR=3 - fi - else - ERR=$RET - fi - STATUS=$ERR - return $STATUS -} - -case "$1" in - start) - /etc/init.d/courier-authdaemon status > /dev/null || /etc/init.d/courier-authdaemon start - echo -n "Starting Courier-IMAP (SSL)" - if test ! -f $TLS_CERTFILE - then - echo -n " generating-SSL-certificate..." - /usr/sbin/mkimapdcert >/dev/null 2>&1 - fi - if test "$TLS_CACHEFILE" != "" - then - rm -f $TLS_CACHEFILE - fi - umask $IMAP_UMASK - ulimit -v $IMAP_ULIMITD - /usr/bin/env - /bin/sh -c " set -a ; - . /etc/courier/imapd ; \ - . /etc/courier/imapd-ssl ; \ - IMAP_TLS=1; export IMAP_TLS; \ - PROXY_HOSTNAME=$PROXY_HOSTNAME ; \ - /usr/sbin/courierlogger -pid=$SSLPIDFILE -start $SSLLOGGEROPTS \ - /usr/lib/courier-imap/couriertcpd -address=$SSLADDRESS \ - -maxprocs=$MAXDAEMONS -maxperip=$MAXPERIP $TCPDOPTS \ - $SSLPORT $COURIERTLS -server -tcpd /usr/sbin/imaplogin \ - $IMAP_BIN ${MAILDIRPATH}" - - # Remember status and be verbose - rc_status -v - ;; - stop) - echo -n "Shutting down Courier-IMAP (SSL)" - /usr/sbin/courierlogger -pid=$SSLPIDFILE -stop - - # Remember status and be verbose - rc_status -v - rm -f $SSLPIDFILE{,.lock} - ;; - try-restart) - $0 status >/dev/null && $0 restart - - # Remember status - rc_status - ;; - restart) - $0 stop - $0 start - - # Remember status - rc_status - ;; - force-reload) - echo -n "Reload Courier-IMAP (SSL)" - $0 stop && $0 start - - # Remember status - rc_status - ;; - reload) - echo -n "Reload Courier-IMAP (SSL)" - rc_failed 3 - - # Remember status and be verbose - rc_status -v - ;; - status) - echo -n "Checking for Courier-IMAP (SSL)" - ## Check status with checkproc(8), if process is running - ## checkproc will return with exit status 0. - - # Status has a slightly different for the status command: - # 0 - service running - # 1 - service dead, but /var/run/ pid file exists - # 2 - service dead, but /var/lock/ lock file exists - # 3 - service not running - check_proc "$SSLPIDFILE" "$LOCKFILE" - - # Remeber status and be verbose - rc_status -v - ;; - *) - echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload}" - exit 1 - ;; -esac -rc_exit diff --git a/courier-imap.changes b/courier-imap.changes index b9ae525..53e1ca9 100644 --- a/courier-imap.changes +++ b/courier-imap.changes @@ -1,3 +1,22 @@ +------------------------------------------------------------------- +Tue Mar 2 07:36:29 UTC 2021 - Arjen de Korte + +- update to 5.0.14 + * Fix packaging problem with a faulty courier-unicode dependency + +- update to 5.0.13 + * Fixes a crash caused by a malformed DNS query/response + +- move SSL cache files to /var/cache/courier-imap/ and put (open)SUSE + specific changes to configuration files in a patch file (instead of + sed scripts) + + courier-imap-config.patch +- remove obsolete SysV init files + - courier-imap.init + - courier-imap-ssl.init + - courier-pop.init + - courier-pop-ssl.init + ------------------------------------------------------------------- Wed Feb 10 08:53:30 UTC 2021 - Arjen de Korte diff --git a/courier-imap.init b/courier-imap.init deleted file mode 100644 index f03ea41..0000000 --- a/courier-imap.init +++ /dev/null @@ -1,134 +0,0 @@ -#! /bin/sh -# Copyright (c) 2005 SUSE LINUX Products GmbH, Nuernberg, Germany. -# All rights reserved. -# -# Author: Thorsten Kukuk -# -# /etc/init.d/courier-imap -# -### BEGIN INIT INFO -# Provides: courier-imap -# Required-Start: $syslog $remote_fs courier-authdaemon -# Should-Start: -# Required-Stop: $syslog $remote_fs -# Should-Stop: -# Default-Start: 3 5 -# Default-Stop: 0 1 2 6 -# Short-Description: Courier-IMAP server -# Description: Start the Courier-IMAP server, which is an -# IMAP server for Maildir mailboxes. -### END INIT INFO - -# Check for missing binaries (stale symlinks should not happen) -IMAP_BIN=/usr/sbin/imapd -test -x $IMAP_BIN || exit 5 - -. /etc/rc.status - -# Read configuration -. /etc/courier/imapd -test "$MAILDIRPATH" == "" && MAILDIRPATH=Maildir -test "$PIDFILE" == "" && PIDFILE=/var/run/imapd.pid -LOCKFILE=${PIDFILE}.lock - -# Reset status of this service -rc_reset - -# our version of check_proc -#IN: $PIDFILE $LOCKFILE -check_proc(){ - # check for process - ps auxw | grep -v grep | grep $1 >/dev/null - RET=$? - if [ $RET = "1" ]; then - if [ -f $1 ]; then - ERR=1 - elif [ -f $2 ]; then - ERR=2 - else - ERR=3 - fi - else - ERR=$RET - fi - STATUS=$ERR - return $STATUS -} - -case "$1" in - start) - /etc/init.d/courier-authdaemon status > /dev/null || /etc/init.d/courier-authdaemon start - echo -n "Starting Courier-IMAP " - umask $IMAP_UMASK - ulimit -v $IMAP_ULIMITD - /usr/bin/env - /bin/sh -c " set -a ; - . /etc/courier/imapd ; \ - grep IMAPDSTARTTLS=NO /etc/courier/imapd-ssl &>/dev/null || . /etc/courier/imapd-ssl ; \ - IMAP_STARTTLS=$IMAPDSTARTTLS ; export IMAP_STARTTLS ; \ - PROXY_HOSTNAME=$PROXY_HOSTNAME ; \ - TLS_PROTOCOL=$TLS_STARTTLS_PROTOCOL ; \ - /usr/sbin/courierlogger -pid=$PIDFILE -start $LOGGEROPTS \ - /usr/lib/courier-imap/couriertcpd -address=$ADDRESS \ - -maxprocs=$MAXDAEMONS -maxperip=$MAXPERIP $TCPDOPTS \ - $PORT /usr/sbin/imaplogin \ - $IMAP_BIN ${MAILDIRPATH}" - - # Remember status and be verbose - rc_status -v - ;; - stop) - echo -n "Shutting down Courier-IMAP " - /usr/sbin/courierlogger -pid=$PIDFILE -stop - - # Remember status and be verbose - rc_status -v - rm -f $PIDFILE{,.lock} - ;; - try-restart) - $0 status >/dev/null && $0 restart - - # Remember status - rc_status - ;; - restart) - $0 stop - $0 start - - # Remember status - rc_status - ;; - force-reload) - echo -n "Reload Courier-IMAP " - $0 stop && $0 start - - # Remember status - rc_status - ;; - reload) - echo -n "Reload Courier-IMAP " - rc_failed 3 - - # Remember status and be verbose - rc_status -v - ;; - status) - echo -n "Checking for Courier-IMAP " - ## Check status with checkproc(8), if process is running - ## checkproc will return with exit status 0. - - # Status has a slightly different for the status command: - # 0 - service running - # 1 - service dead, but /var/run/ pid file exists - # 2 - service dead, but /var/lock/ lock file exists - # 3 - service not running - check_proc "$PIDFILE" "$LOCKFILE" - - # Remember status and be verbose - rc_status -v - ;; - *) - echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload}" - exit 1 - ;; -esac -rc_exit diff --git a/courier-imap.spec b/courier-imap.spec index 4282d9c..1892dd6 100644 --- a/courier-imap.spec +++ b/courier-imap.spec @@ -17,7 +17,7 @@ Name: courier-imap -Version: 5.0.12 +Version: 5.0.14 Release: 0 Summary: An IMAP and POP3 Server for Maildir MTAs License: GPL-3.0-or-later @@ -27,12 +27,8 @@ Source0: https://downloads.sourceforge.net/project/courier/imap/%{version Source1: https://downloads.sourceforge.net/project/courier/imap/%{version}/%{name}-%{version}.tar.bz2.sig Source2: pop3.pamd Source3: imap.pamd -# Keyring downloaded from https://www.courier-mta.org/KEYS.bin#/%{name}.keyring +# Keyring downloaded from https://www.courier-mta.org/KEYS.bin#/%%{name}.keyring Source4: %{name}.keyring -Source11: courier-imap.init -Source12: courier-imap-ssl.init -Source13: courier-pop.init -Source14: courier-pop-ssl.init Source15: courier-imap.service Source16: courier-imap-ssl.service Source17: courier-imap-gencert.service @@ -44,6 +40,8 @@ Patch2: %{name}-ulimit_conf.patch ### Patch for upstream: ## fixes typo in Makefile.am Patch3: %{name}-Makefile.patch +# Apply (open)SUSE specific changes to configuration +Patch4: %{name}-config.patch BuildRequires: audit-libs BuildRequires: courier-authlib-devel >= 0.71 BuildRequires: courier-unicode-devel >= 2.1 @@ -97,10 +95,11 @@ version. If you install this version, you must remove it if you later install the entire Courier server. %prep -%setup -q -%patch0 -%patch2 -%patch3 +%autosetup -p0 +# For %%doc macro +mv libs/imap/README{,.imap} +mv libs/maildir/README.sharedfolders{.txt,} +mv libs/maildir/README.maildirquota{.txt,} %build %configure \ @@ -118,7 +117,7 @@ install the entire Courier server. --with-certdb=%{_sysconfdir}/ssl/certs \ --with-certsdir=%{_sysconfdir}/ssl/private \ --enable-workarounds-for-imap-client-bugs -make %{?_smp_mflags} +%make_build %install %make_install @@ -127,38 +126,21 @@ mv %{buildroot}%{_bindir}/{couriertls,imapd,pop3d} %{buildroot}%{_sbindir}/ # Rename imapd.8 to courier-imapd.8 mv %{buildroot}%{_mandir}/man8/imapd.8 %{buildroot}%{_mandir}/man8/%{name}d.8 # Install PAM config files -install -D -m 644 $RPM_SOURCE_DIR/pop3.pamd %{buildroot}%{_sysconfdir}/pam.d/pop3 -install -D -m 644 $RPM_SOURCE_DIR/imap.pamd %{buildroot}%{_sysconfdir}/pam.d/imap +install -D -m 644 %{S:2} %{buildroot}%{_sysconfdir}/pam.d/pop3 +install -D -m 644 %{S:3} %{buildroot}%{_sysconfdir}/pam.d/imap # Install init scripts for i in imap imap-ssl imap-gencert pop pop-ssl pop-gencert; do ln -s -f service %{buildroot}%{_sbindir}/rccourier-$i done # Install service files -for j in imap imap-ssl imap-gencert pop pop-ssl pop-gencert; do - install -D -m 0644 $RPM_SOURCE_DIR/courier-$j.service %{buildroot}/%{_unitdir}/courier-$j.service -done +install -d -m 0755 %{buildroot}%{_unitdir} +install -m 0644 %{S:15} %{S:16} %{S:17} %{S:18} %{S:19} %{S:20} %{buildroot}%{_unitdir} # Remove original init scripts, will not work longer rm %{buildroot}%{_prefix}/lib/%{name}/imapd.rc rm %{buildroot}%{_prefix}/lib/%{name}/imapd-ssl.rc rm %{buildroot}%{_prefix}/lib/%{name}/pop3d.rc rm %{buildroot}%{_prefix}/lib/%{name}/pop3d-ssl.rc # -# Fix imapd.dist -# -sed -i -e 's/^IMAPDSTART=.*/IMAPDSTART=YES/' %{buildroot}%{_sysconfdir}/courier/imapd.dist -sed -i -e 's/^ADDRESS=.*/ADDRESS=127.0.0.1/' %{buildroot}%{_sysconfdir}/courier/imapd.dist -sed -i -e 's/^MAXPERIP=.*/MAXPERIP=20/' %{buildroot}%{_sysconfdir}/courier/imapd.dist -sed -i -e 's/^IMAPDSSLSTART=.*/IMAPDSSLSTART=YES/' %{buildroot}%{_sysconfdir}/courier/imapd-ssl.dist -#sed -i -e 's/^#\ \+\(TLS_CIPHER_LIST=.*\)/\1/' %{buildroot}%{_sysconfdir}/courier/imapd-ssl.dist -sed -i -e 's/^POP3DSTART=.*/POP3DSTART=YES/' %{buildroot}%{_sysconfdir}/courier/pop3d.dist -sed -i -e 's/^POP3DSSLSTART=.*/POP3DSSLSTART=YES/' %{buildroot}%{_sysconfdir}/courier/pop3d-ssl.dist -#sed -i -e 's/^#\ \+\(TLS_CIPHER_LIST=.*\)/\1/' %{buildroot}%{_sysconfdir}/courier/pop3d-ssl.dist -# For %doc macro -install -m 0644 libs/imap/ChangeLog ChangeLog -install -m 0644 libs/imap/README README.imap -install -m 0644 libs/imap/README.proxy README.proxy -install -m 0644 libs/maildir/README.maildirquota.txt README.maildirquota -install -m 0644 libs/maildir/README.sharedfolders.txt README.sharedfolders install -D -m 0755 sysconftool %{buildroot}%{_datadir}/%{name}/sysconftool chmod 755 %{buildroot}%{_datadir}/%{name}/sysconftool cat >%{buildroot}%{_datadir}/%{name}/configlist <%{buildroot}%{_datadir}/%{name}/configlist </dev/null -for i in imap imap-ssl imap-gencert pop pop-ssl pop-gencert; do - %service_add_post courier-$i.service -done +%service_add_post courier-imap-gencert.service courier-imap-ssl.service courier-imap.service +%service_add_post courier-pop-gencert.service courier-pop-ssl.service courier-pop.service %postun -for i in imap imap-ssl imap-gencert pop pop-ssl pop-gencert; do - %service_del_postun courier-$i.service -done +%service_del_postun courier-imap-gencert.service courier-imap-ssl.service courier-imap.service +%service_del_postun courier-pop-gencert.service courier-pop-ssl.service courier-pop.service %files %defattr(-,root,root,755) %license COPYING* -%doc AUTHORS libs/imap/ChangeLog libs/imap/BUGS README README.imap README.maildirquota README.proxy -%doc README.sharedfolders +%doc AUTHORS README +%doc libs/imap/ChangeLog libs/imap/BUGS libs/imap/README.imap libs/imap/README.proxy +%doc libs/maildir/README.sharedfolders libs/maildir/README.maildirquota %config %attr(644,root,root) %{_sysconfdir}/pam.d/imap %config %attr(644,root,root) %{_sysconfdir}/pam.d/pop3 %dir %{_sysconfdir}/courier @@ -223,5 +193,8 @@ done %{_sbindir}/* %{_mandir}/man?/* %{_unitdir}/courier-*.service +%dir %attr(750,root,root) %{_localstatedir}/cache/%{name}/ +%ghost %{_localstatedir}/cache/%{name}/sslpop3cache +%ghost %{_localstatedir}/cache/%{name}/sslimapcache %changelog diff --git a/courier-pop-ssl.init b/courier-pop-ssl.init deleted file mode 100644 index bab00ff..0000000 --- a/courier-pop-ssl.init +++ /dev/null @@ -1,145 +0,0 @@ -#! /bin/sh -# Copyright (c) 2005 SUSE LINUX Products GmbH, Nuernberg, Germany. -# All rights reserved. -# -# Author: Thorsten Kukuk -# -# /etc/init.d/courier-pop-ssl -# -### BEGIN INIT INFO -# Provides: courier-pop-ssl -# Required-Start: $syslog $remote_fs courier-authdaemon -# Should-Start: -# Required-Stop: $syslog $remote_fs -# Should-Stop: -# Default-Start: 3 5 -# Default-Stop: 0 1 2 6 -# Short-Description: Courier-POP3 server for SSL connections -# Description: Start the Courier-POP3 server, which is an -# POP3 server for Maildir mailboxes. This -# version only accepts SSL connections. -### END INIT INFO - -# Check for missing binaries (stale symlinks should not happen) -POP3_BIN=/usr/sbin/pop3d -test -x $POP3_BIN || exit 5 - -. /etc/rc.status - -# Read configuration -TLS_CACHEFILE="" -. /etc/courier/pop3d -. /etc/courier/pop3d-ssl -test "$MAILDIRPATH" == "" && MAILDIRPATH=Maildir -test "$PIDFILE" == "" && PIDFILE=/var/run/pop3d.pid -test "$SSLPIDFILE" == "" && PIDFILE=/var/run/pop3d-ssl.pid -LOCKFILE=${SSLPIDFILE}.lock - -# Reset status of this service -rc_reset - -# our version of check_proc -#IN: $PIDFILE $LOCKFILE -check_proc(){ - # check for process - ps auxw | grep -v grep | grep $1 >/dev/null - RET=$? - if [ $RET = "1" ]; then - if [ -f $1 ]; then - ERR=1 - elif [ -f $2 ]; then - ERR=2 - else - ERR=3 - fi - else - ERR=$RET - fi - STATUS=$ERR - return $STATUS -} - -case "$1" in - start) - /etc/init.d/courier-authdaemon status > /dev/null || /etc/init.d/courier-authdaemon start - echo -n "Starting Courier-POP3 (SSL)" - if test ! -f $TLS_CERTFILE - then - echo -n " generating-SSL-certificate..." - /usr/sbin/mkpop3dcert >/dev/null 2>&1 - fi - if test "$TLS_CACHEFILE" != "" - then - rm -f $TLS_CACHEFILE - fi - ulimit -v $POP3_ULIMITD - /usr/bin/env - /bin/sh -c " set -a ; - . /etc/courier/pop3d ; \ - . /etc/courier/pop3d-ssl ; \ - POP3_TLS=1; POP3_STARTTLS=NO; POP3_TLS_REQUIRED=0; \ - PROXY_HOSTNAME=$PROXY_HOSTNAME ; \ - /usr/sbin/courierlogger -pid=$SSLPIDFILE -start $SSLLOGGEROPTS \ - /usr/lib/courier-imap/couriertcpd -address=$SSLADDRESS \ - -maxprocs=$MAXDAEMONS -maxperip=$MAXPERIP $TCPDOPTS \ - $SSLPORT $COURIERTLS -server -tcpd /usr/sbin/pop3login \ - $POP3_BIN ${MAILDIRPATH}" - - # Remember status and be verbose - rc_status -v - ;; - stop) - echo -n "Shutting down Courier-POP3 (SSL)" - /usr/sbin/courierlogger -pid=$SSLPIDFILE -stop - - # Remember status and be verbose - rc_status -v - rm -f $SSLPIDFILE{,.lock} - ;; - try-restart) - $0 status >/dev/null && $0 restart - - # Remeber status - rc_status - ;; - restart) - $0 stop - $0 start - - # Remeber status - rc_status - ;; - force-reload) - echo -n "Reload Courier-POP3 (SSL)" - $0 stop && $0 start - - # Remeber status - rc_status - ;; - reload) - echo -n "Reload Courier-POP3 (SSL)" - rc_failed 3 - - # Remember status and be verbose - rc_status -v - ;; - status) - echo -n "Checking for Courier-POP3 (SSL)" - ## Check status with checkproc(8), if process is running - ## checkproc will return with exit status 0. - - # Status has a slightly different for the status command: - # 0 - service running - # 1 - service dead, but /var/run/ pid file exists - # 2 - service dead, but /var/lock/ lock file exists - # 3 - service not running - check_proc "$SSLPIDFILE" "$LOCKFILE" - - #Remeber status and be verbose - rc_status -v - ;; - *) - echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload}" - exit 1 - ;; -esac -rc_exit diff --git a/courier-pop.init b/courier-pop.init deleted file mode 100644 index 7e49a23..0000000 --- a/courier-pop.init +++ /dev/null @@ -1,132 +0,0 @@ -#! /bin/sh -# Copyright (c) 2005 SUSE LINUX Products GmbH, Nuernberg, Germany. -# All rights reserved. -# -# Author: Thorsten Kukuk -# -# /etc/init.d/courier-pop -# -### BEGIN INIT INFO -# Provides: courier-pop -# Required-Start: $syslog $remote_fs courier-authdaemon -# Should-Start: -# Required-Stop: $syslog $remote_fs -# Should-Stop: -# Default-Start: 3 5 -# Default-Stop: 0 1 2 6 -# Short-Description: Courier-POP3 server -# Description: Start the Courier-POP3 server, which is an -# POP3 server for Maildir mailboxes. -### END INIT INFO - -# Check for missing binaries (stale symlinks should not happen) -POP3_BIN=/usr/sbin/pop3d -test -x $POP3_BIN || exit 5 - -. /etc/rc.status - -# Read configuration -. /etc/courier/pop3d -test "$MAILDIRPATH" == "" && MAILDIRPATH=Maildir -test "$PIDFILE" == "" && PIDFILE=/var/run/pop3d.pid -LOCKFILE=${PIDFILE}.lock - -# Reset status of this service -rc_reset - -# our version of check_proc -#IN: $PIDFILE $LOCKFILE -check_proc(){ - # check for process - ps auxw | grep -v grep | grep $1 >/dev/null - RET=$? - if [ $RET = "1" ]; then - if [ -f $1 ]; then - ERR=1 - elif [ -f $2 ]; then - ERR=2 - else - ERR=3 - fi - else - ERR=$RET - fi - STATUS=$ERR - return $STATUS -} - -case "$1" in - start) - /etc/init.d/courier-authdaemon status > /dev/null || /etc/init.d/courier-authdaemon start - echo -n "Starting Courier-POP3 " - /usr/bin/env - /bin/sh -c " set -a ; - . /etc/courier/pop3d ; \ - grep POP3_STARTTLS=NO /etc/courier/pop3d-ssl &>/dev/null || . /etc/courier/pop3d-ssl ; \ - POP3_STARTTLS=$POP3_STARTTLS ; export POP3_STARTTLS ; \ - PROXY_HOSTNAME=$PROXY_HOSTNAME ; \ - TLS_PROTOCOL=$TLS_STARTTLS_PROTOCOL ; \ - /usr/sbin/courierlogger -pid=$PIDFILE -start $LOGGEROPTS \ - /usr/lib/courier-imap/couriertcpd -address=$ADDRESS \ - -maxprocs=$MAXDAEMONS -maxperip=$MAXPERIP $TCPDOPTS \ - $PORT /usr/sbin/pop3login \ - $POP3_BIN ${MAILDIRPATH}" - - # Remember status and be verbose - rc_status -v - ;; - stop) - echo -n "Shutting down Courier-POP3 " - /usr/sbin/courierlogger -pid=$PIDFILE -stop - - # Remember status and be verbose - rc_status -v - rm -f $PIDFILE{,.lock} - ;; - try-restart) - $0 status >/dev/null && $0 restart - - # Remember status - rc_status - ;; - restart) - $0 stop - $0 start - - # Remember status - rc_status - ;; - force-reload) - echo -n "Reload Courier-POP3 " - $0 stop && $0 start - - # Remember status - rc_status - ;; - reload) - echo -n "Reload Courier-POP3 " - rc_failed 3 - - # Remember status and be verbose - rc_status -v - ;; - status) - echo -n "Checking for Courier-POP3 " - ## Check status with checkproc(8), if process is running - ## checkproc will return with exit status 0. - - # Status has a slightly different for the status command: - # 0 - service running - # 1 - service dead, but /var/run/ pid file exists - # 2 - service dead, but /var/lock/ lock file exists - # 3 - service not running - check_proc "$PIDFILE" "$LOCKFILE" - - #Remeber status and be verbose - rc_status -v - ;; - *) - echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload}" - exit 1 - ;; -esac -rc_exit