forked from pool/fail2ban
20c0b48fcb
- Integrate change to resolve bnc#1146856
- Update to 0.11.2
increased stability, filter and action updates
- New Features and Enhancements
* fail2ban-regex:
- speedup formatted output (bypass unneeded stats creation)
- extended with prefregex statistic
- more informative output for `datepattern` (e. g. set from filter) - pattern : description
* parsing of action in jail-configs considers space between action-names as separator also
(previously only new-line was allowed), for example `action = a b` would specify 2 actions `a` and `b`
* new filter and jail for GitLab recognizing failed application logins (gh#fail2ban/fail2ban#2689)
* new filter and jail for Grafana recognizing failed application logins (gh#fail2ban/fail2ban#2855)
* new filter and jail for SoftEtherVPN recognizing failed application logins (gh#fail2ban/fail2ban#2723)
* `filter.d/guacamole.conf` extended with `logging` parameter to follow webapp-logging if it's configured
(gh#fail2ban/fail2ban#2631)
* `filter.d/bitwarden.conf` enhanced to support syslog (gh#fail2ban/fail2ban#2778)
* introduced new prefix `{UNB}` for `datepattern` to disable word boundaries in regex;
* datetemplate: improved anchor detection for capturing groups `(^...)`;
* datepattern: improved handling with wrong recognized timestamps (timezones, no datepattern, etc)
as well as some warnings signaling user about invalid pattern or zone (gh#fail2ban/fail2ban#2814):
- filter gets mode in-operation, which gets activated if filter starts processing of new messages;
in this mode a timestamp read from log-line that appeared recently (not an old line), deviating too much
from now (up too 24h), will be considered as now (assuming a timezone issue), so could avoid unexpected
bypass of failure (previously exceeding `findtime`);
- better interaction with non-matching optional datepattern or invalid timestamps;
- implements special datepattern `{NONE}` - allow to find failures totally without date-time in log messages,
whereas filter will use now as timestamp (gh#fail2ban/fail2ban#2802)
* performance optimization of `datepattern` (better search algorithm in datedetector, especially for single template);
* fail2ban-client: extended to unban IP range(s) by subnet (CIDR/mask) or hostname (DNS), gh#fail2ban/fail2ban#2791;
* extended capturing of alternate tags in filter, allowing combine of multiple groups to single tuple token with new tag
prefix `<F-TUPLE_`, that would combine value of `<F-V>` with all value of `<F-TUPLE_V?_n?>` tags (gh#fail2ban/fail2ban#2755)
- Fixes
* [stability] prevent race condition - no ban if filter (backend) is continuously busy if
too many messages will be found in log, e. g. initial scan of large log-file or journal (gh#fail2ban/fail2ban#2660)
* pyinotify-backend sporadically avoided initial scanning of log-file by start
* python 3.9 compatibility (and Travis CI support)
* restoring a large number (500+ depending on files ulimit) of current bans when using PyPy fixed
* manual ban is written to database, so can be restored by restart (gh#fail2ban/fail2ban#2647)
* `jail.conf`: don't specify `action` directly in jails (use `action_` or `banaction` instead)
* no mails-action added per default anymore (e. g. to allow that `action = %(action_mw)s` should be specified
per jail or in default section in jail.local), closes gh#fail2ban/fail2ban#2357
* ensure we've unique action name per jail (also if parameter `actname` is not set but name deviates from standard name, gh#fail2ban/fail2ban#2686)
* don't use `%(banaction)s` interpolation because it can be complex value (containing `[...]` and/or quotes),
so would bother the action interpolation
* fixed type conversion in config readers (take place after all interpolations get ready), that allows to
specify typed parameters variable (as substitutions) as well as to supply it in other sections or as init parameters.
* `action.d/*-ipset*.conf`: several ipset actions fixed (no timeout per default anymore), so no discrepancy
between ipset and fail2ban (removal from ipset will be managed by fail2ban only, gh#fail2ban/fail2ban#2703)
* `action.d/cloudflare.conf`: fixed `actionunban` (considering new-line chars and optionally real json-parsing
with `jq`, gh#fail2ban/fail2ban#2140, gh#fail2ban/fail2ban#2656)
* `action.d/nftables.conf` (type=multiport only): fixed port range selector, replacing `:` with `-` (gh#fail2ban/fail2ban#2763)
* `action.d/firewallcmd-*.conf` (multiport only): fixed port range selector, replacing `:` with `-` (gh#fail2ban/fail2ban#2821)
* `action.d/bsd-ipfw.conf`: fixed selection of rule-no by large list or initial `lowest_rule_num` (gh#fail2ban/fail2ban#2836)
* `filter.d/common.conf`: avoid substitute of default values in related `lt_*` section, `__prefix_line`
should be interpolated in definition section (inside the filter-config, gh#fail2ban/fail2ban#2650)
* `filter.d/dovecot.conf`:
- add managesieve and submission support (gh#fail2ban/fail2ban#2795);
- accept messages with more verbose logging (gh#fail2ban/fail2ban#2573);
* `filter.d/courier-smtp.conf`: prefregex extended to consider port in log-message (gh#fail2ban/fail2ban#2697)
* `filter.d/traefik-auth.conf`: filter extended with parameter mode (`normal`, `ddos`, `aggressive`) to handle
the match of username differently (gh#fail2ban/fail2ban#2693):
- `normal`: matches 401 with supplied username only
- `ddos`: matches 401 without supplied username only
- `aggressive`: matches 401 and any variant (with and without username)
* `filter.d/sshd.conf`: normalizing of user pattern in all RE's, allowing empty user (gh#fail2ban/fail2ban#2749)
- Rebased patches
- Removed upstream patch fail2ban-0.10.4-upstream-pid-file-location.patch
OBS-URL: https://build.opensuse.org/request/show/853310
OBS-URL: https://build.opensuse.org/package/show/security/fail2ban?expand=0&rev=104
28 lines
1.3 KiB
Diff
28 lines
1.3 KiB
Diff
diff -ur fail2ban-0.11.2-orig/files/fail2ban.service.in fail2ban-0.11.2/files/fail2ban.service.in
|
|
--- fail2ban-0.11.2-orig/files/fail2ban.service.in 2020-11-23 21:43:03.000000000 +0100
|
|
+++ fail2ban-0.11.2/files/fail2ban.service.in 2020-12-05 18:22:01.503018894 +0100
|
|
@@ -2,17 +2,18 @@
|
|
Description=Fail2Ban Service
|
|
Documentation=man:fail2ban(1)
|
|
After=network.target iptables.service firewalld.service ip6tables.service ipset.service nftables.service
|
|
-PartOf=iptables.service firewalld.service ip6tables.service ipset.service nftables.service
|
|
+PartOf=firewalld.service ipset.service nftables.service
|
|
|
|
[Service]
|
|
Type=simple
|
|
+EnvironmentFile=-/etc/sysconfig/fail2ban
|
|
Environment="PYTHONNOUSERSITE=1"
|
|
ExecStartPre=/bin/mkdir -p /run/fail2ban
|
|
-ExecStart=@BINDIR@/fail2ban-server -xf start
|
|
+ExecStart=/usr/bin/fail2ban-server -xf $FAIL2BAN_OPTIONS start
|
|
# if should be logged in systemd journal, use following line or set logtarget to sysout in fail2ban.local
|
|
-# ExecStart=@BINDIR@/fail2ban-server -xf --logtarget=sysout start
|
|
-ExecStop=@BINDIR@/fail2ban-client stop
|
|
-ExecReload=@BINDIR@/fail2ban-client reload
|
|
+# ExecStart=/usr/bin/fail2ban-server -xf --logtarget=sysout start
|
|
+ExecStop=/usr/bin/fail2ban-client stop
|
|
+ExecReload=/usr/bin/fail2ban-client reload
|
|
PIDFile=/run/fail2ban/fail2ban.pid
|
|
Restart=on-failure
|
|
RestartPreventExitStatus=0 255
|