rpm/flake-pilot
SHA256
1
0
Fork 0
forked from pool/flake-pilot
Code Pull Requests Activity
flake-pilot/flake-pilot.spec

207 lines
6.4 KiB
RPMSpec
Raw Normal View History

osc copypac from project:home:marcus.schaefer:EOS package:flake-pilot revision:13 OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=1
2024-03-25 08:21:03 +00:00
#
# spec file for package flake-pilot
#
# Copyright (c) 2022 Elektrobit Automotive GmbH
# Copyright (c) 2023 Marcus Schäfer
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
Name: flake-pilot
- Bump version: 3.0.10 → 3.0.11 - Fix build for Leap Issues on the gcc side for static targets, disable sci static build for older targets, e.g Leap - Prevent use of socat in firecracker-pilot Do not shell out socat and use proper UnixListener/UnixStream to do this job. This version of the commit works but I stumbled across a few issues: 1. Permission denied when the UnixListener runs as user and the firecracker process was called as root (run_as: root in the flake). The former implementation ran socat via sudo in the same way as the firecracker process. Thus if you register the flake to run as root it can now also only be called as root, which is acceptable. 2. The behavior in interactive sessions differs compared to socat. When sci in the guest is called it creates a pty and all data is copied to the vsock stream. The host connects via an UDS socket to this data and we multiplex stdin->stream and stream->stdout. When doing this with socat the behavior is different in a way that e.g tabs are effectively interpreted and the pty prompt allows for input on the same line when my code now always needs a newline to renew the prompt. I did not debug further what is needed to make this look nicer. This Fixes #8 OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=11
2024-04-08 11:03:01 +00:00
Version: 3.0.11
osc copypac from project:home:marcus.schaefer:EOS package:flake-pilot revision:13 OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=1
2024-03-25 08:21:03 +00:00
Release: 0
Summary: Launcher for flake applications
License: MIT
%if "%{_vendor}" == "debbuild"
Packager: Marcus Schaefer <marcus.schaefer@elektrobit.com>
%endif
Group: System/Management
- Bump version: 3.0.9 → 3.0.10 - Clippy fixes - sudo is required - Fix error handling Make sure the real command that is called through sudo is displayed. Also fix that the runas information is really used - Exit on remove if there is an error The remove sequence when used with --container or --vm deregisters all apps associated with the container or VM first. If there is an error on this deregistration, exit early and do not try to delete the container/vm - Update URL in spec file Point to OSInside Organisation OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=9
2024-03-27 13:13:15 +00:00
Url: https://github.com/OSInside/flake-pilot
osc copypac from project:home:marcus.schaefer:EOS package:flake-pilot revision:13 OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=1
2024-03-25 08:21:03 +00:00
Source0: %{name}.tar.gz
Source1: cargo_config
- Bump version: 3.0.8 → 3.0.9 - Fix spec file Several changes according to the SUSE regulations - Fix robot tests OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=7
2024-03-25 10:59:50 +00:00
Source2: %{name}-rpmlintrc
osc copypac from project:home:marcus.schaefer:EOS package:flake-pilot revision:13 OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=1
2024-03-25 08:21:03 +00:00
%if 0%{?debian} || 0%{?ubuntu}
Requires: golang-github-containers-common
%endif
- Bump version: 3.0.9 → 3.0.10 - Clippy fixes - sudo is required - Fix error handling Make sure the real command that is called through sudo is displayed. Also fix that the runas information is really used - Exit on remove if there is an error The remove sequence when used with --container or --vm deregisters all apps associated with the container or VM first. If there is an error on this deregistration, exit early and do not try to delete the container/vm - Update URL in spec file Point to OSInside Organisation OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=9
2024-03-27 13:13:15 +00:00
Requires: sudo
osc copypac from project:home:marcus.schaefer:EOS package:flake-pilot revision:13 OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=1
2024-03-25 08:21:03 +00:00
Requires: rsync
Requires: tar
BuildRequires: python3-docutils
%if 0%{?suse_version}
BuildRequires: rust
BuildRequires: cargo
BuildRequires: openssl-devel
BuildRequires: glibc-devel-static
BuildRequires: python3-Pygments
%endif
%if 0%{?debian} || 0%{?ubuntu}
BuildRequires: rust-all
BuildRequires: libssl-dev
BuildRequires: openssl
BuildRequires: pkg-config
BuildRequires: python3-pygments
%endif
BuildRoot: %{_tmppath}/%{name}-%{version}-build
%description
Run flake applications using a symlink structure pointing
to a launcher binary which actually launches the application through
a runtime engine like podman. Along with the launcher there is
also a control tool to register an application as a flake application
%package -n flake-pilot-podman
Summary: Podman pilot
Group: System/Management
Requires: rsync
Requires: podman
- Bump version: 3.0.9 → 3.0.10 - Clippy fixes - sudo is required - Fix error handling Make sure the real command that is called through sudo is displayed. Also fix that the runas information is really used - Exit on remove if there is an error The remove sequence when used with --container or --vm deregisters all apps associated with the container or VM first. If there is an error on this deregistration, exit early and do not try to delete the container/vm - Update URL in spec file Point to OSInside Organisation OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=9
2024-03-27 13:13:15 +00:00
Requires: sudo
osc copypac from project:home:marcus.schaefer:EOS package:flake-pilot revision:13 OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=1
2024-03-25 08:21:03 +00:00
%description -n flake-pilot-podman
Launcher for OCI containers based applications through podman
%package -n flake-pilot-firecracker
Summary: FireCracker pilot
Group: System/Management
%if 0%{?debian} || 0%{?ubuntu}
BuildRequires: clang
%else
BuildRequires: clang-devel
%endif
Requires: rsync
Requires: firecracker
Requires: xz
Requires: e2fsprogs
- Bump version: 3.0.9 → 3.0.10 - Clippy fixes - sudo is required - Fix error handling Make sure the real command that is called through sudo is displayed. Also fix that the runas information is really used - Exit on remove if there is an error The remove sequence when used with --container or --vm deregisters all apps associated with the container or VM first. If there is an error on this deregistration, exit early and do not try to delete the container/vm - Update URL in spec file Point to OSInside Organisation OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=9
2024-03-27 13:13:15 +00:00
Requires: sudo
osc copypac from project:home:marcus.schaefer:EOS package:flake-pilot revision:13 OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=1
2024-03-25 08:21:03 +00:00
%description -n flake-pilot-firecracker
Launcher and service tools for KVM VM based applications
through firecracker
%package -n flake-pilot-firecracker-dracut-netstart
Summary: Dracut Module Network Startup
Group: System/Management
%if 0%{?suse_version}
Requires: systemd-network
%else
Requires: systemd
%endif
- Bump version: 3.0.8 → 3.0.9 - Fix spec file Several changes according to the SUSE regulations - Fix robot tests OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=7
2024-03-25 10:59:50 +00:00
BuildArch: noarch
osc copypac from project:home:marcus.schaefer:EOS package:flake-pilot revision:13 OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=1
2024-03-25 08:21:03 +00:00
%description -n flake-pilot-firecracker-dracut-netstart
Start systemd network and resolver inside of the initrd such
that the network setup persists after switch_root if there
is no systemd process called but sci as simple command
execution interface
%package -n flake-pilot-firecracker-guestvm-tools
Summary: FireCracker guest VM tools
Group: System/Management
%description -n flake-pilot-firecracker-guestvm-tools
Guest VM tools to help with firecracker workloads
%prep
%setup -q -n flake-pilot
%build
mkdir -p .cargo
cp %{SOURCE1} .cargo/config
make build
- Allow non static sci Build sci non static for ppc64le which doesn't support the rust static target yet OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=5
2024-03-25 09:27:57 +00:00
%ifnarch ppc64le
- Bump version: 3.0.10 → 3.0.11 - Fix build for Leap Issues on the gcc side for static targets, disable sci static build for older targets, e.g Leap - Prevent use of socat in firecracker-pilot Do not shell out socat and use proper UnixListener/UnixStream to do this job. This version of the commit works but I stumbled across a few issues: 1. Permission denied when the UnixListener runs as user and the firecracker process was called as root (run_as: root in the flake). The former implementation ran socat via sudo in the same way as the firecracker process. Thus if you register the flake to run as root it can now also only be called as root, which is acceptable. 2. The behavior in interactive sessions differs compared to socat. When sci in the guest is called it creates a pty and all data is copied to the vsock stream. The host connects via an UDS socket to this data and we multiplex stdin->stream and stream->stdout. When doing this with socat the behavior is different in a way that e.g tabs are effectively interpreted and the pty prompt allows for input on the same line when my code now always needs a newline to renew the prompt. I did not debug further what is needed to make this look nicer. This Fixes #8 OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=11
2024-04-08 11:03:01 +00:00
%if 0%{?suse_version} && 0%{?suse_version} >= 1600
- Allow non static sci Build sci non static for ppc64le which doesn't support the rust static target yet OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=5
2024-03-25 09:27:57 +00:00
make compile_sci_static
%endif
- Bump version: 3.0.10 → 3.0.11 - Fix build for Leap Issues on the gcc side for static targets, disable sci static build for older targets, e.g Leap - Prevent use of socat in firecracker-pilot Do not shell out socat and use proper UnixListener/UnixStream to do this job. This version of the commit works but I stumbled across a few issues: 1. Permission denied when the UnixListener runs as user and the firecracker process was called as root (run_as: root in the flake). The former implementation ran socat via sudo in the same way as the firecracker process. Thus if you register the flake to run as root it can now also only be called as root, which is acceptable. 2. The behavior in interactive sessions differs compared to socat. When sci in the guest is called it creates a pty and all data is copied to the vsock stream. The host connects via an UDS socket to this data and we multiplex stdin->stream and stream->stdout. When doing this with socat the behavior is different in a way that e.g tabs are effectively interpreted and the pty prompt allows for input on the same line when my code now always needs a newline to renew the prompt. I did not debug further what is needed to make this look nicer. This Fixes #8 OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=11
2024-04-08 11:03:01 +00:00
%endif
osc copypac from project:home:marcus.schaefer:EOS package:flake-pilot revision:13 OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=1
2024-03-25 08:21:03 +00:00
%install
make DESTDIR=%{buildroot}/ install
- Bump version: 3.0.10 → 3.0.11 - Fix build for Leap Issues on the gcc side for static targets, disable sci static build for older targets, e.g Leap - Prevent use of socat in firecracker-pilot Do not shell out socat and use proper UnixListener/UnixStream to do this job. This version of the commit works but I stumbled across a few issues: 1. Permission denied when the UnixListener runs as user and the firecracker process was called as root (run_as: root in the flake). The former implementation ran socat via sudo in the same way as the firecracker process. Thus if you register the flake to run as root it can now also only be called as root, which is acceptable. 2. The behavior in interactive sessions differs compared to socat. When sci in the guest is called it creates a pty and all data is copied to the vsock stream. The host connects via an UDS socket to this data and we multiplex stdin->stream and stream->stdout. When doing this with socat the behavior is different in a way that e.g tabs are effectively interpreted and the pty prompt allows for input on the same line when my code now always needs a newline to renew the prompt. I did not debug further what is needed to make this look nicer. This Fixes #8 OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=11
2024-04-08 11:03:01 +00:00
test -f target/*-unknown-linux-gnu/static/sci && \
make DESTDIR=%{buildroot}/ install_sci_static || \
- Allow non static sci Build sci non static for ppc64le which doesn't support the rust static target yet OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=5
2024-03-25 09:27:57 +00:00
make DESTDIR=%{buildroot}/ install_sci
osc copypac from project:home:marcus.schaefer:EOS package:flake-pilot revision:13 OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=1
2024-03-25 08:21:03 +00:00
mkdir -p %{buildroot}/overlayroot
mkdir -p %{buildroot}/usr/lib/flake-pilot
mkdir -p %{buildroot}/var/lib/firecracker/images
mkdir -p %{buildroot}/var/lib/firecracker/storage
mkdir -p %{buildroot}/etc/dracut.conf.d
mkdir -p %{buildroot}/usr/lib/dracut/modules.d/80netstart
cp -a firecracker-pilot/dracut/usr/lib/dracut/modules.d/80netstart/* \
%{buildroot}/usr/lib/dracut/modules.d/80netstart
install -m 644 firecracker-pilot/dracut/etc/dracut.conf.d/extramodules.conf \
%{buildroot}/etc/dracut.conf.d/extramodules.conf
install -m 755 %{buildroot}/usr/sbin/sci \
%{buildroot}/usr/lib/flake-pilot/sci
mkdir -p %{buildroot}/etc
install -m 644 flakes.yml %{buildroot}/etc/flakes.yml
%files
%defattr(-,root,root)
%dir /usr/share/flakes
%dir /etc/flakes
%config /etc/flakes.yml
/usr/bin/flake-ctl
/usr/share/bash-completion/completions/flake-ctl
%doc /usr/share/man/man8/flake-pilot.8.gz
%doc /usr/share/man/man8/flake-ctl.8.gz
%doc /usr/share/man/man8/flake-ctl-list.8.gz
%files -n flake-pilot-podman
%config /etc/flakes/container-flake.yaml
/usr/bin/podman-pilot
/usr/sbin/flake-registry
%doc /usr/share/man/man8/flake-ctl-podman-load.8.gz
%doc /usr/share/man/man8/flake-ctl-podman-pull.8.gz
%doc /usr/share/man/man8/flake-ctl-podman-register.8.gz
%doc /usr/share/man/man8/flake-ctl-podman-remove.8.gz
%doc /usr/share/man/man8/podman-pilot.8.gz
%files -n flake-pilot-firecracker
%dir /var/lib/firecracker
%dir /var/lib/firecracker/images
%dir /var/lib/firecracker/storage
%dir /usr/lib/flake-pilot
%config /etc/flakes/firecracker-flake.yaml
%config /etc/flakes/firecracker.json
%doc /usr/share/man/man8/flake-ctl-firecracker-pull.8.gz
%doc /usr/share/man/man8/flake-ctl-firecracker-remove.8.gz
%doc /usr/share/man/man8/flake-ctl-firecracker-register.8.gz
/usr/bin/firecracker-pilot
%doc /usr/share/man/man8/firecracker-pilot.8.gz
/usr/lib/flake-pilot/sci
%files -n flake-pilot-firecracker-dracut-netstart
%dir /usr/lib/dracut
%dir /usr/lib/dracut/modules.d
%dir /usr/lib/dracut/modules.d/80netstart
%dir /etc/dracut.conf.d
/usr/lib/dracut/modules.d/80netstart
- Bump version: 3.0.8 → 3.0.9 - Fix spec file Several changes according to the SUSE regulations - Fix robot tests OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=7
2024-03-25 10:59:50 +00:00
%config /etc/dracut.conf.d/extramodules.conf
osc copypac from project:home:marcus.schaefer:EOS package:flake-pilot revision:13 OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=1
2024-03-25 08:21:03 +00:00
%files -n flake-pilot-firecracker-guestvm-tools
%dir /overlayroot
/usr/sbin/sci
%doc /usr/share/man/man8/sci.8.gz
- Add missing %changelog line in spec OBS-URL: https://build.opensuse.org/package/show/Virtualization:Appliances:Builder/flake-pilot?expand=0&rev=6
2024-03-25 09:41:01 +00:00
%changelog
Copy Permalink