rpm/fwupd
SHA256
1
0
Fork 0
forked from pool/fwupd
Code Pull Requests Activity
d9597753fe
fwupd/fwupd.changes

1508 lines
68 KiB
Plaintext
Raw Blame History

-------------------------------------------------------------------
Wed May 8 10:39:24 UTC 2019 - Maurizio Galli <maurizio.galli@gmail.com>
- Update to version 1.2.8:
* Don't upload reports when the user has configured their system in a broken way
* Allow setting the daemon verbose domains at runtime
* Allow fwupdmgr to modify the daemon config
* Do not compare version formats when the release format is unknown
* Do not fall back integers to a plain version format
* Use the device version format when converting the release version
* Set the VersionFormat using the metadata or the UEFI quirk
- Changes from version 1.2.7:
* l10n: Create Lithuanian translation file
* l10n: Update LINGUAS
* Updated: Add support for 8BitDo M30.
* modem-manager: increase the timeout to wait for modem after uninhibited
* modem-manager: implement qmi pdc active config selection as attach()
* fu-engine: When removing activation flag match the correct version
* Require --force to install a release with a different version format
* Match the old or new version number when setting NEEDS_REBOOT
* Make an error message clearer when there are no updates available
* Add support for the not-child extension from Logitech
* thunderbolt: Set require-ac for Thunderbolt devices
(Fixes: gh#hughsie/fwupd#1142)
* Fix some typos spotted using codespell
* Add a component categories to express the firmware type
* fu-tool: Port get-history command to fwupdtool
* Recreate the history database if migration failed
* Move the core built-in 'fwupd' remote over to the dell-esrt plugin
* snap: Add a custom systemd unit to call activation on shutdown
(Fixes: gh#hughsie/fwupd#1125)
* ata: Flush cache before standby and activate
* synapticsmst: blacklist plugin when using amdgpu
(Fixes: gh#hughsie/fwupd#1121)
* uefi: add a new option to specify the os name
* Return the newest device when using fu_history_get_device_by_id()
* uefi: More carefully check the output from tpm2_pcrlist
* uefi: Don't overwrite CustomFlags if set from a quirk
* Shut down the daemon if the on-disk binary is replaced
* ata: Correct activation functionality
* Fix version comparisons after reboot for some formats
* fu-tool: save history from stuff installed with `fwupdtool`
- Changes from version 1.2.6:
* ata: send ATA standby immediate when activating firmware
* offline: Be more graceful when dealing with Plymouth failures
* Save the new version in the history database for offline updates
* Show the DeviceID when showing the updates list
* Allow forcing an offline-only update on a live system using --force
* Do not schedule an update on battery power if it requires AC power
* superio: Add InstallDuration default value
* superio: Add support for writing new e-flash contents
* superio: Fix reading the attestation checksum
* superio: Add support for reading the device checksum
* superio: Use the chipset ID in the device name
* superio: Move the device flush before getting the register map
* superio: Move all the IT89xx code to a subclassed device object
* superio: Move all the IT85xx code to a subclassed device object
* superio: Split and export fu_superio_device_ec_writeX()
* superio: Remove the port from fu_superio_device_ec_read()
* superio: Move the register read/write into the FuSuperioDevice object
* superio: Check the IOBAD0 is usable during setup
* superio: Use fu_device_set_firmware_size()
* superio: Move some constants out to the common header
* superio: Use GObject properties in FuSuperioDevice
* superio: Convert FuSuperioDevice to be derivable
* Update Plymouth when updating pending firmware
* Ask to reboot after scheduling an offline firmware update
* Do not fail when scheduling more than one update to be run offline
* Allow running offline updates when in system-update.target
* Fix the location of fwupdoffline in the service file
* Add optional vfuncs to allow detaching and attaching verify()
* superio: Add list of SPI commands for future usage
* Add a verify-update command to fwupdtool
* uefi: Actually upload the UPDATE_INFO entry for the UX capsule
* superio: Get the chip size from the EC rather than hardcoding
* uefi: Check the error code of QueryCapsuleCapabilities() correctly
* Update the UEFI UX Capsule Header checksum when needed.
* uefi: Copy the shimx64.efi binary for known broken firmware
* Correctly get the check the new version for devices that replug
* Add a simple script to add a capsule header
* Ensure the PKCS-7 client certificate exists at startup
* fix makecab directive options
* fwpup.service: use display-manager.service instead of gdm.service
* Allow signing the fwupd report with the client certificate
* Add a D-Bus method to generate a signature using the self-signed client certificate
* Allow signing and verifying data using a PKCS-7 self-signed client certificate
* Fix a critical warning when loading a PKCS-7 certificate with no DN
* Include all device checksums in the LVFS report
* modem-manager: Fix a trivial build warning
* superio: Fix a trivial build warning
* Move out the offline update functionality to a new binary
* Do not reboot when failing to start fwupd during offline updates
* Do not write the schema version to the db when loading
* Do not recreate XbSilo caches when running on a readonly filesystem
* Add the fwupdagent binary for use in shell scripts
* Allow restricting firmware updates for enterprise use
* standalone-installer: new --allow-older and --allow-reinstall options
* Show the upgrade and downgrade flags when getting releases for a device
* Rename FwupdRelease:trust-flags to FwupdRelease:flags
* fu-tool: Save device state to @LOCALSTATEDIR@/lib/fwupd/state.json on actions
* modem-manager: implement support for qmi-pdc
* Add a plugin to support ModemManager hardware
* fu-tool: Don't let failing to find dbus prevent engine from starting
* ata: Support delayed activation
* dell-dock: Use activation when calling fwupdtool activate
* Add a support for delayed activation
* uefi: Fix the self tests when running on Fedora SilverBlue
* Do not fail to start the daemon if tpm2_pcrlist hangs
* po/make-images.sh: quote LOCALEDIR and PYTHON3
* meson: print stderr of python3 command instead of stdout
* Revert "contrib/debian: Switch to debian unstable"
* Add elogind support
- Changes from version 1.2.5:
* uefi: fix segfault in fwup_set_update_statuses
* Show in Flathub correctly
* debian: explicitly depend on shared-mime-info
* superio: Implement detach() and attach()
* superio: Correct the names of some constants and improve debugging support
* dell-dock: Filter the last supported payloads of certain board 4 SKUs
* circleci: Manage the lifecycle of the snap
* Add support to run snap build in CircleCI
* wacom-usb: Use the correct buffer format for the touch module
* wacom-usb: Set the install duration for each device type
* wacom-usb: Return with an error if there were too many retries
* wacom-usb: Make updating less verbose
* Convert all child instance IDs when converting the parent
* uefi: Allow devices to create more complete fake UEFI devices
* unifying: Fix regression when recovering from failed flash
* Ensure libxmlb dir exists for LGTM.com
* Add C build configuration for LGTM.com
* Use G_BEGIN_DECLS correctly for internal headers
* standalone-installer: Fix issue found by LGTM
* Use '#pragma once' to avoid a lot of boilerplate
* Force LGTM to see Python 3
* fwupd: Hide firmware-packager behind meson option`
* fu-common-cab: Correct handling of CAB files w/ nested directories and older libgcab
* Fix a regression in using the InstanceIDs for quirk matching
* thunderbolt: Convert the instance IDs as we never open the device
* udev: Manally call fu_device_setup() to convert the instance IDs
* fu-tool: Correct a crash caused by calling fwupdtool update
* fu-tool: Don't fail if dbus is unavailable
* contrib/debian: Switch to debian unstable
* wacom-usb: Record the block number when failing
* wacom-usb: The touch address is big endian
* wacom-usb: Accept a non-binary IHEX file for the touch update
* wacom-usb: Only poll when the device status is 'busy'
* wacom-usb: Only reboot the device when all composite devices have been updated
* wacom-usb: Fix flashing failure with latest Intuos Pro tablet
* dfu: Fill holes when reading SREC files
* Add fwupd_guid_from_string() to drop dep on uuid
* wacom-raw: Check the InstanceID rather than GUID
* Defer the InstanceID->GUID hashing until after setup
* ata: Check for USB enclosures as well
* Do not use efivar just to print a mixed endian GUID
* Add fu_device_add_instance_id() and prefer explicit conversion
* Report the DeviceInstanceIDs to `fwupdmgr get-updates`
* Export some of the GUID functionality
* Allow a plugin to set _ANOTHER_WRITE_REQUIRED to run more than one plugin
* nvme: Add an extra check for Dell plugins to avoid false positives
* ata: Add support for detecting Dell GUIDs
* Fix the self tests when using glib2 >=2.59.0
* Add support to call composite prepare and cleanup using fwupdtool
* uefi: Disable -Wno-address-of-packed-member
* uefi: Don't unconditionally enable Werror for the EFI binary
* Disable -Wno-address-of-packed-member
- Changes from version 1.2.4:
* Remove the autogenerated headers in the gettext files
* ata: Default to the non-activation 0xE subcommand
* fastboot: Use a much longer timeout as the removal delay
* fu-progressbar: be more quiet when running non-interactive
* fu-tool: Show UpdateMessage if applicable for install command
* dfu: Simplify the SREC parser to avoid a crash with an invalid file
* wacom-raw: Use the correct error codes when the panel is not supported
* wacom-usb: Add some more information to the README
* fu-keyring-utils: Don't fail missing PKI directory when compiled with GPG/PKCS7
* dell: Check that the flash interface command is available
* wacom-usb: Fix the plugin name to allow devices to be updated
* fastboot: flash the partition after downloading the file
* uefi: Add a quirk to use the legacy bootmgr description
* ata: Mark all devices as needing a reboot
* ata: Add a new plugin to upgrade firmware on ATA/ATAPI hardware
* udev-device: Add a utility function for debugging
* udev-device: Set the firmware revision automatically
* udev-device: Set the serial number automatically
* udev-device: Fall back to non-database model and vendor values
* udev-device: Fix critical warning if the device has no parent
* dell-dock: Add support for a passive flow
* Add support for an `UpdateMessage` and display it in tools
* fu-tool: Port the `get-updates` command over
* When using `directory` remote type automatically generate metadata
* libfwupd: Add support for new remote type "directory"
* Ensure cabinet archives always have a container checksum
* Add support for a per-release source and details URL
* When generating a CAB Silo use the prefix "components"
* uefi: Add a trivial debugging statement to debug a UX capsule failure
* uefi: Use fwup_new0() to allocate the updates table array
* nitrokey: Correct Nitrokey Storage invalid firmware version read
* dell-dock: Add support for flashing Thunderbolt over I2C
* wacom-raw: Add a plugin to update Wacom embedded EMR and AES panels
* fu-util/fu-tool: sync up reboot and shutdown behavior
* dfu: Ignore the SUB ASCII value
* dfu: Fix the parser to support extended segment addresses
* dfu: Support ihex files with leading comments
don't show an error
* uefi: Correct a boot order creation bug (Fixes: gh#hughsie/fwupd#956)
* uefi: Remove all variable length arrays
* uefi: Fix a logic bug in fwup_search_file()
* uefi: Use _cleanup_free in one more place
* uefi: Do not pass required attrs to fwup_delete_variable()
* uefi: Delete the old Linux-Firmware-Updater boot entry
* uefi: Use the GNU-EFI BOOL type
* Check if plugin changed after the device attaches or detaches
* uefi: Refactor and simplify the EFI loader
* Show a console warning if loading an out-of-tree plugin
* UEFI: Do the UX checksum calculation in fwupd
* wacom-usb: Add two more Intuos tablets
* nvme: Add the needs-shutdown quirk to Phison NVMe drives
* Add _NEEDS_SHUTDOWN flag for devices
* Use GCC __cleanup__ features in the EFI loader
* nvme: Add flag to support manually aligning the firmware to the FWUG value
* nvme: Support FGUID to get the SKU GUID
* nvme: Support FWUG to get the write block size
* nvme: Add trivial comment to clarify address bitshifting
* uefi: Do not check the BGRT status before uploading a UX capsule
* dfu: Fix flashing various Jabra devices
* upower: Add support for checking battery percentage
* nvme: Check the return code of the admin passthru ioctl
* fu-tool: Add support for an 'update' command to fwupdtool
* dell-dock: Set minimum board to board 4
* dell-dock: Workaround a manufacturing bug for board level 4
* dell-dock: Wait longer for re-enumeration on TBT SKU
* superio: Support IT89xx devices
* fu-main: remove incompatible locale error message
* Add a new plugin checklist (Fixes: gh#hughsie/fwupd#899)
- Dropped obsolete patch: fwupd-bsc1130056-change-esp-os-name.patch
(upstream PR: gh#hughsie/fwupd#1119
- Fixed fwupd-bsc1130056-change-shim-path.patch so that it works
with the new files
- Cleaned up changelog
-------------------------------------------------------------------
Fri May 3 15:53:17 UTC 2019 - Dominique Leuenberger <dimstar@opensuse.org>
- Stop shipping polkit rules, as we have the distro specific setup
in polkit-default-privs (boo#1125428).
-------------------------------------------------------------------
Thu Mar 28 07:31:49 UTC 2019 - Gary Ching-Pang Lin <glin@suse.com>
- Add fwupd-bsc1130056-change-esp-os-name.patch to change the
OS directory in ESP (bsc#1130056)
- Add fwupd-bsc1130056-change-shim-path.patch to set the default
shim binary for openSUSE/SLE (bsc#1130056)
- Link fwupd*.efi.signed to fwupd*.efi as requested by fwupd
(bsc#1129466)
-------------------------------------------------------------------
Tue Feb 5 23:00:20 UTC 2019 - Bernhard Voelker <mail@bernhard-voelker.de>
- fwupd.spec: fix shell syntax error in %postun section (boo#1120363).
-------------------------------------------------------------------
Thu Jan 10 09:14:45 UTC 2019 - bjorn.lie@gmail.com
- Update to version 1.2.3:
* Correctly migrate the history database
- Changes from version 1.2.2:
* Log an error if started with an incompatible locale
* Fix building with -Wl,-z,defs
* ebitdo: Fix the reported version number if the daemon locale is
not C.UTF-8
* Add Dell TB18DC to the known devices list
* Allow replacing the last byte in the image when using 'dfu-tool
replace-data'
* Check the device checksum as well as the content checksum
during verify
* Submit the device firmware checksum and update protocol in the
submitted report
* Include the device checksum and update protocol in the
historydb
* uefi: Add the PCR0 value as the device checksum for system
firmware
* Add new API to get the release protocol from the metadata
* Allow plugins to define support for a 'well-known' protocol
* uefi: When adding headers set the header size to 4k
* uefi: Append the header on capsules without headers from Linux
* flashrom: Ensure the quirks database is set on the new object
* uefi: Do not add devices with invalid GUIDs
* Do not allow a GUID of zero
* Add shared functionality for reading and writing with
O_NONBLOCK
* Only run attach and detach if the device is in the wrong mode
* Sanitize the version if the version format has been specified
* wacom-usb: Remove the DTH generation hardware as it will not
work with fwupd
* thunderbolt: Remove a superfluous boundary condition when
verifying update
* Add a plugin to update hardware that supports fastboot
* Fix a regression when doing GetReleases on unsupported hardware
* dfu: Require a specific USB class and subclass for DFU mode
* Correctly parse format the version numbers correctly using old
metadata
* amt: Fix a crash if AMT returns an empty response
* Check plugins set error on failure
* contrib: Add a simple python3 client
* installed-tests: Adjust to actually use a remote for installed
tests
* Add more standard USB identifier GUIDs
* wacomhid: Rename to wacom-usb
* Provide a way for plugins to decompress a custom archive to ram
- Changes from version 1.2.1:
* Remove DaemonVersionFormat=quad
* Shut down the daemon after 2h of inactivity
* Create a silo index to speed up GUID queries
* Fix flashing the 8bitdo SF30
* Speed up fwupd startup by loading less thunderbolt firmware
* Query the XbSilo when calling fu_plugin_check_supported()
* Guess the version format when it is not provided
* Fix a use-after-free when using valgrind and --immediate-exit
* Add per-release install duration values
* Fix showing the custom remote agreements
* Be more explicit setting the update state
* Include the os-release information in the release metadata
- Changes from version 1.2.0:
* ebitdo: remove SF30/SN30 pro device ids
* dell-dock: Drop delayed MST callback routine
* synapticsmst: Adjust EVB board handling
* synapticsmst: Remove the content checking of firmware
* synapticsmst: Access Board ID through memory instead In
firmware images HDCP 2.2 will be enabled by default,so access
to flash region will fail.`
* contrib: Adjust flatpak build for moving to flathub
* dell-dock: Prefer to flash VMM5331 via I2C instead of DP aux
* Use HTTPS_PROXY if set
* firmware-packager: Make it clearer to use
* Sort the firmware sack by component priority
* flatpak: Update gnu-efi to latest version
* amt: Set the full device version including the BuildNum
* fwupdmgr/fwupdtool: Move monitor command to fwupdtool
* fwupdmgr/fwupdtool: Move firmware builder from fwupdmgr to
fwupdtool
* Add version format quirks for several Lenovo machines
* uefi: Set the quirks on created devices
* dell_dock: Use correct offset for finding version of MST
* dell-dock: Add missing unlock call for MST via dell_dock plugin
* Support the Intel ME version format
* Port from libappstream-glib to libxmlb
* Bump requirement to meson 0.46.0
* fu-main: Catch SIGTERM while update is in progress
* fu-tool: Stop any running daemon over dbus before loading
engine
* meson: Bump dependency to 0.44 and adjust sysconfdir handling
* dell-dock: If marketing name is invalid don't fail
initialization
* Readme Updated: Added KDE Discover as one more graphical
front-end available for fwupd.
* dell-dock: Correct a situation that error wasn't propagating
* Don't segfault if a plugin returns FALSE from UpdateFunc with
no error set
* dell-dock: Use different debug strings for each device type
* dell-dock: Don't use the VLA feature in the new dock
* Add a plugin for an upcoming Dell USB-C dock
* contrib: Add information on how to use debugging scripts
* Allow setting the version format from a quirk entry
* Don't use AppStream-glib for string helpers
* Don't use AppStream-glib for version helpers
* Don't use AppStream-glib for the GUID helpers
* fu-device: Ensure that parent ID is created before creating
quirked children
* Update all sub-devices for a composite update
* Stop showing the current release during updates in fwupdmgr
* uefi: Move the TPM unlocking functionality from the Dell to
UEFI plugin
* Run the Dell plugin initialization after the UEFI plugin
* thunderbolt-power: Fix possible linker problem
* Allow firmware files to depend on versions from other devices
* fu-debug: Redirect all debugging output to stderr instead of
stdout
* synapticsmst: Adjust panamera ESM update routine for some
reported issues
* fu-engine: Optionally wait for replug before updating a device
* fu-device-list: Use delayed device removal when removing the
tree
* thunderbolt: Use replugging from the daemon
* Add support for devices to show an estimated flash time
* Marked some CL options for translation
* ci: Run clang static analysis for Ubuntu build rather than just
clang compiler
* nvme: Initialize the buffer before reading the contents
* contrib: Add a standalone installer creation script
* rts54hid: Add support for Realtek USB devices using vendor HID
commands
* fu-engine: Don't show devices pending a reboot in GetUpgrades
* Add FuMutex helper to make various parts of the daemon
thread-safe
* rts54hub: Add support for Realtek USB devices using vendor HUB
commands
* uefi: Check the amount of free space on the ESP
* fu-tool: Import debugging options from fu-debug like fu-main
* superio: Set the physical and logical IDs
- Add pkgconfig(xmlb) BuildRequires: New dependency.
-------------------------------------------------------------------
Tue Dec 11 04:25:11 UTC 2018 - Gary Ching-Pang Lin <glin@suse.com>
- Add pesign-obs-integration to BuildRequires and add fwupd*.efi to
BRP_PESIGN_FILES to get it signed
- Add LC_IMAGES and use efivar only if %{with efi_fw_update}
+ Also update the version requirement of efivar
- Disable Redfish and NVME plugins if %{without efi_fw_update}
since those two plugins require efivar
- Remove fwup from BuildRequires since fwupdate is already merged
into fwupd.
-------------------------------------------------------------------
Mon Dec 10 10:17:50 UTC 2018 - schwab@suse.de
- Use gnu-efi only if %{with efi_fw_update}, always use pkgconfig(efivar)
- Fix file list
-------------------------------------------------------------------
Thu Dec 6 07:22:17 UTC 2018 - Gary Ching-Pang Lin <glin@suse.com>
- Amend %post and %postun to install/uninstall fwupd*.efi to the
EFI system partition
+ Also add shim to Requires for fwupdx64.efi
- Mark fwupdate as obsolete
+ fwupdate has been merged into fwupd since fwupd 1.1.0.
-------------------------------------------------------------------
Mon Nov 12 10:31:09 CET 2018 - ndas@suse.de
- fwupd is require for thunderbolt firmware update in SLE15-SP1(fate#322681)
-------------------------------------------------------------------
Thu Sep 13 09:23:44 UTC 2018 - Nico Kruber <nico.kruber@gmail.com>
- Update to version 1.1.2:
+ New Features:
- Add a new device flag "ignore-validation" that will override checks
- Add a new plugin to enumerate EC firmware
- Add a new plugin to update NVMe hardware
- Add a plugin for updating using the flashrom command line tool
- Allow the device list to take care of waiting for the device replug
- Allow updating just one specific device from the command line
- Allow upgrades using a self-signed fwupd.efi binary
- Download firmware if the user specifies a URI
- Include serial number in daemon device output when trusted
- Notify all plugins of device removals through a new vfunc
- Use boltd force power API if available
+ Bugfixes:
- Add an install hook for classic snap
- Allow forcing installation even if no AC power is applied
- Allow using --force to ignore version_lowest
- Always use the same HardwareIDs as Windows
- Check the device state before assuming a fake DFU runtime
- Copy over parent GUIDs from other plugin donors
- Detect location of python3 interpreter
- Do not add udev devices after a small delay
- Don't fail to run if compiled without GPG/PKCS7
- Fix a segfault in fwupdtool caused by cleanup of USB plugins
- Implement the systemd recommendations for offline updates
- Improve performance when reading keys from the quirk database
- Remove children of devices when the parent is removed
- Rewrite synapticsmst to use modern error handling
- Rewrite the unifying plugin to use the new daemon-provided functionality
- Show a time estimate on the progressbar after an update has started
-------------------------------------------------------------------
Mon Sep 10 11:45:07 UTC 2018 - Jan Engelhardt <jengelh@inai.de>
- Use noun phrase for summary. Trim request for comments from
description.
-------------------------------------------------------------------
Fri Sep 7 21:35:47 UTC 2018 - Nico Kruber <nico.kruber@gmail.com>
- Update to version 1.1.1:
+ New Features:
- Add support for the Synaptics Panamera hardware
- Add validation for Alpine and Titan Ridge
- Improve the Redfish plugin to actually work with real hardware
+ Bugfixes:
- Allow different plugins to add the same device
- Allow flashing unifying devices in recovery mode
- Allow running synapticsmst on non-Dell hardware
- Check the ESP for sanity at at startup
- Do not hold hidraw devices open forever
- Don't override _FORTIFY_SOURCE when building the EFI binary
- Don't show passwords in fwupdmgr
- Fix a potential segfault in smbios data parsing
- Fix encoding the GUID into the capsule EFI variable
- Fix various bugs when reading the thunderbolt version number
- Reboot synapticsmst devices at the end of flash cycle
- Show status messages when the daemon is initializing
- Show the correct title when updating devices
- Show the reasons that plugins are not run on the CLI
- Use localedir in po/make-images
-------------------------------------------------------------------
Wed Jul 25 09:23:22 UTC 2018 - tchvatal@suse.com
- Run %udev_rules_update in post as package install udev rules
-------------------------------------------------------------------
Thu Jul 12 09:19:58 UTC 2018 - oliver@getspam.de
- Update to version 1.1.0:
+ New Features:
- Add a initial Redfish support
- Add a tool to mimic the original fwupdate CLI interface
- Allow devices to assign a plugin from the quirk subsystem
- Change the quirk file structure to be more efficient
- Merge fwupdate functionality into fwupd
- Run a plugin vfunc before and after all the composite devices are updated
- Support more Wacom tablets
+ Bugfixes:
- Add release information for locked devices
- Allow building with older meson
- Detect the EFI system partition location at runtime
- Do not use 8bitdo bootloader commands after a successful flash
- Enable accesing downloaded files in flatpak and snap
- Fix a potential buffer overflow when applying a DFU patch
- Fix downgrading older releases to devices
- Fix flashing devices that require a manual replug
- Fix several small memory leaks in various places
- Fix the retrieval of Redfish version
- Fix unifying failure to detach when using a slow host controller
- Set the Wacom device status when erasing and writing firmware
- Show errors in the CLI if unable to access directory
- Use the parent device name for Wacom sub-modules
- Removed enable_pkcs7_when_testing_only.patch
-------------------------------------------------------------------
Wed Jul 11 14:30:15 UTC 2018 - oliver@getspam.de
- Update to version 1.0.8:
+ New Features (including version 1.0.7):
- Add an plugin to update some future Wacom tablets
- Add 'fwupdmgr get-topology' to show logical device tree
- Add support for creating a flatpak
- Add support for creating a snap
- Add support for Motorola S-record files
- Add the Linux Foundation public GPG keys for firmware and metadata
- Show a translated warning when the server is limiting downloads
- Add enable-remote and disable-remote commands to fwupdmgr
- Add fu_plugin_add_compile_version() for libraries to use
- Allow requiring specific versions of libraries for firmware updates
- If no remotes are enabled try to enable the LVFS
- Show a warning with interactive prompt when enabling a remote
+ Bugfixes (including version 1.0.7):
- Add a firmware diagnostic tool called fwupdtool
- Adjust all licensing to LGPL 2.1+
- Allow installing more than one firmware using 'fwupdmgr install'
- Allow specifying hwids with OR relationships
- Do not call fu_plugin_init() on blacklisted plugins
- Do not require libcolorhug to build
- Fix a crash in libfwupd where no device ID is set
- Fix a potential DoS in libdfu by limiting holes to 1MiB
- Fix a segfault that sometimes occurs during cleanup of USB plugins
- Fix Hardware-ID{0,1,2,12} compatibility with Microsoft
- Hide devices that aren't updatable by default in fwupdmgr
- Search all UEFI GUIDs when matching hardware
- Stop matching Nintendo Switch Pro in the 8bitdo plugin
- Check that EFI system partition is mounted before update
- Disable synapticsmst remote control on failure
- Don't recoldplug thunderbolt to fix a flashing failure
- Fix SQL error when running 'fwupdmgr clear-offline'
- Improve the update report message
- Only enumerate Dell Docks if the type is known
- Only run certtool if a new enough gnutls is present
- Prevent a client crash if the daemon somehow sends invalid data
- Reboot after scheduling using logind not systemd
- Use the right encoding for the label in make-images
- Added/backported enable_pkcs7_when_testing_only.patch:
+ needed to disable pkcs7 test during build (can be removed for
fwupd >= 1.0.9)
-------------------------------------------------------------------
Wed Apr 4 09:43:55 UTC 2018 - dimstar@opensuse.org
- Update hasbang in installed files from /usr/bin/env python3 to
/usr/bin/python3.
-------------------------------------------------------------------
Tue Apr 3 13:14:02 UTC 2018 - mpluskal@suse.com
- Update url
- Small packaging cleanup with spec-cleaner
-------------------------------------------------------------------
Fri Mar 23 20:06:34 UTC 2018 - antoine.belvire@opensuse.org
- Update to version 1.0.6:
+ New Features:
- Add bash completion for fwupdmgr.
- Add support for newest Thunderbolt chips.
- Allow all functions that take device arguments to be
prompted.
- Allow devices to use the runtime version when in bootloader
mode.
- Allow overriding ESP mount point via conf file.
- Delete any old fwupdate capsules and efivars when launching
fwupd.
- Generate Vala bindings.
+ Bugfixes:
- Allow ctrl-d out of the prompt for devices.
- Allow to create package out of provided binary.
- Correct handling of unknown Thunderbolt devices.
- Correctly detect new remotes that are manually copied.
- Fix a crash related to when passing device to downgrade in
CLI.
- Fix running the self tests when no fwupd is installed.
- Fix Unifying signature writing and parsing for Texas
bootloader.
- Only send success and failure reports to the server.
- Use a CNAME to redirect to the correct CDN for metadata.
- Use a longer timeout when powering back the Thunderbolt
device.
-------------------------------------------------------------------
Thu Mar 15 13:14:55 UTC 2018 - fcrozat@suse.com
- Ensure library package has a dependency on main package,
otherwise it won't be usable.
-------------------------------------------------------------------
Mon Mar 05 20:31:46 UTC 2018 - dimstar@opensuse.org
- Update to version 1.0.5:
+ New Features:
- Offer to reboot when processing an offline update.
- Report the efivar, libsmbios and fwupdate library versions.
- Report Thunderbolt safe mode and SecureBoot status.
- Show the user a URL when they report a known problem.
- Support split cabinet archives as produced by Windows Update.
+ Bugfixes:
- Be more careful deleting and modifying device history.
- Clarify which devices don't have upgrades.
- Ensure the Thunderbolt version is xx.yy.
- Fix a daemon warning when using fwupdmgr get-results.
- Fix crasher with MST flashing.
- Fix DFU detach with newer releases of libusb.
- Include the device VID and PID when generating the device-id.
- Set the RemoteId when using GetDetails.
- Stop matching 8bitdo DS4 controller VID/PID.
- Use help2man for dfu-tool and drop docbook dependencies.
- Use ngettext for any strings with plurals.
- Use the default value if ArchiveSizeMax is unspecified.
-------------------------------------------------------------------
Mon Mar 05 20:30:22 UTC 2018 - dimstar@opensuse.org
- Update to version 1.0.4:
+ New Features:
- Add D-Bus methods to get and modify the history information.
- Allow the user to share firmware update success or failure.
- Ask the user to refresh metadata when it is very old.
- Store firmware update success and failure to a local
database.
+ Bugfixes:
- Add a device name for locked UEFI devices.
- Allow each plugin to opt-in to the recoldplug action.
- Fix firmware downloading using gnome-software.
- Fix UX capsule reference to the one specified in efivar.
- Never add two devices to the daemon with the same ID.
- Rescan supported flags when refreshing metadata.
- Add pkgconfig(json-glib-1.0) BuildRequires: new dependency.
-------------------------------------------------------------------
Mon Mar 05 20:28:01 UTC 2018 - dimstar@opensuse.org
- Update to version 1.0.3:
+ New Features:
- Add a new plugin to add support for CSR "Driverless DFU".
- Add initial SF30/SN30 Pro support.
- Support AppStream metadata with relative <location> URLs.
+ Bugfixes:
- Add more metadata to the user-agent string.
- Block owned Dell TPM updates.
- Choose the correct component from provides matches using
requirements.
- Do not try to parse huge compressed archive files.
- Fix a double-free bug in the Udev code.
- Handle Thunderbolt "native" mode.
- Use the new functionality in libgcab >= 1.0 to avoid writing
temp files.
-------------------------------------------------------------------
Thu Dec 21 18:49:45 UTC 2017 - stefan.bruens@rwth-aachen.de
- Unbreak compilation on non-x86, upstream renamed options to disable
plugins.
-------------------------------------------------------------------
Tue Dec 19 09:32:41 UTC 2017 - fcrozat@suse.com
- Update to version 1.0.2:
+ Add a plugin for the Nitrokey Storage device
+ Add support for the original AVR DFU protocol
+ Allow different plugins to claim the same device
+ Allow quirks to set common USB properties
+ Move a common plugin functionality out to a new shared object
+ Optionally delay the device removal for better replugging
+ Set environment variables to allow easy per-plugin debugging
+ Use a SHA1 hash for the internal DeviceID
+ Add quirk for AT32UC3B1256 as used in the RubberDucky
+ Disable the dell plugin if libsmbios fails
+ Don't register for USB UDev events to later ignore them
+ Fix a possible buffer overflow when debugging ebitdo devices
+ Fix critical warning when more than one remote fails to load
+ Fix DFU attaching AVR32 devices like the XMEGA
+ Ignore useless Thunderbolt device types
+ Refactor ColorHug into a much more modern plugin
+ Release the Steelseries interface if getting the version failed
+ Remove autoconf-isms from the meson configure options
+ Show a nicer error message if the requirement fails
+ Sort the output of GetUpgrades correctly
- Changes from version 1.0.1:
+ Add support for HWID requirements
+ Add support for programming various AVR32 and XMEGA parts using DFU
+ Add the various DFU quirks for the Jabra Speak devices
+ Allow specifying the output file type for 'dfu-tool read'
+ Move the database of supported devices out into runtime loaded files
+ Support the IHEX record type 0x05
+ Use help2man to generate the man page at build time
+ Use the new quirk infrastructure for version numbers
+ Catch invalid Dell dock component requests
+ Correctly output Intel HEX files with > 16bit offset addresses
+ Do not try to verify the element write if upload is unsupported
+ Fix a double-unref when updating any 8Bitdo device
+ Fix crash when enumerating with Dell dock connected but with no UEFI
+ Fix uploading large firmware files over DFU
+ Format the BCD USB revision numbers correctly
+ Guess the DFU transfer size if it is not specified
+ Include the reset timeout as wValue to fix some DFU bootloaders
+ Make the error message clearer when sans fonts are missing
+ Support devices with truncated DFU interface data
+ Use the correct remote-specified username and passord when using fwupdmgr
+ Use the correct wDetachTimeOut when writing DFU firmware
+ Verify devices with legacy VIDs are actually 8Bitdo controllers
- Add help2man as BuildRequires.
-------------------------------------------------------------------
Thu Dec 14 18:40:06 UTC 2017 - stefan.bruens@rwth-aachen.de
- Fix dependencies and build options for non-x86 architectures. At
least FW updates for USB are arch independent, and EFI FW updates
can also be applied on Aarch64.
-------------------------------------------------------------------
Fri Oct 27 09:17:53 UTC 2017 - dimstar@opensuse.org
- Update to version 1.0.0:
* Add the plugin documentation to the main gtk-doc
* Add a waiting-for-auth daemon state
* Add fwupd_remote_get_checksum() to use in client programs
* Generate the LD script from the GObject Introspection data
* Prevent fwupd from mounting filesystems
* uefi: Do not use system-specific infomation for PCI devices
* uefi: Support uploading the firmware splash image
* dell: only set coldplug delay when we know we need it
* dell: only run SMI to toggle host MST GPIO on systems with host MST
* dell: add functionality to blacklist HW with problems
* dell: only run on intended chassis
* thunderbolt-power: always run after thunderbolt plugin
* Allow plugins to depend on each other
* Add support for SMBIOSv3
* dell: prefer to use hwids to get DMI keys and DE table
* debian: remove /etc/fwupd.conf on upgrade
* unifying: Use fu_plugin_check_supported()
* Add fu_plugin_check_supported()
* unifying: Use a device whitelist to avoid breaking devices
* Fix various printing issues with the progressbar
* dell: Fix a trivial whitespace issue
* Do not fail to load the daemon if cached metadata is invalid
* Do not store the newest release as part of the FuDevice object
* Add a method to return a list of upgrades for a specific device
* Move the downgrade calculation to the daemon
* Make FuDevice derive from FwupdDevice rather than FwupdResult
* Add a command 'clear-offline' to fwupdmgr
* Merge releases where multiple remotes provide the same firmware
* Remove the UniqueID property
* uefi: Do not set the release version
* udev: Do not match USB devices, even with a GUID set
* Use the intel-wmi-thunderbolt kernel module to force power
* dell: drop thunderbolt force power code
* unifying: Add hardcoded summaries for peripheral kinds
* Create CODE_OF_CONDUCT.md
* Ensure more devices set the device summary
* Add an 'Summary' property to each device
* Add a human-readable title for each remote
* unifying: Disable if the kernel has no CONFIG_HIDRAW support
* Move deprecated symbols to a new header
* Introduce an s390x cross compile target to CI
* Add ModifyRemote as an easy way to enable and disable remotes like the LVFS
* Do not auto-open all USB devices at startup
* dfu: Use FuDeviceLocker
* unifying: Use FuDeviceLocker
* colorhug: Use FuDeviceLocker
* ebitdo: Use FuDeviceLocker
* altos: Use FuDeviceLocker
* steelseries: Use FuDeviceLocker
* usb: Use FuDeviceLocker
* Add FuDeviceLocker to simplify device open/close lifecycles
* dfu: Remove DEVO support
* dfu: Remove the now-unused symtab support
* Remove the ELF support from libdfu and move the code to the altos plugin
* Use -Werror when building in Travis CI
* Do not install the libdfu helper library
* Parse the SMBIOS DMI table directly
* usb: Disable the fallback USB plugin
* Test for missing language translations at build time
* Fix the libdfu self test failure on s390 and ppc64
-------------------------------------------------------------------
Fri Oct 27 09:05:57 UTC 2017 - dimstar@opensuse.org
- Update to version 0.9.8:
* Add a command 'clear-offline' to fwupdmgr
* Do not fail to load the daemon if cached metadata is invalid
* Fix a crash when using fu_plugin_device_add_delay()
* Fix the libdfu self test failure on s390 and ppc64
* Format the BCD USB revision numbers correctly
* Never fallback to an offline update from client code
* Prevent fwupd from mounting filesystems
* dfu: Allow flashing when the target does not specify an
alt-name
* dfu: Do not try to verify the element write if upload is
unsupported
* dfu: Fix uploading large firmware files
* dfu: Include the reset timeout as wValue to fix some hardware
* dfu: Set the vendor ID to the runtime USB VID
* dfu: Use 0x0101 as an alias for 0x0110
* thunderbolt: move test for mock environment
(gh#hughsie/fwupd#280)
* udev: Do not match USB devices, even with a GUID set
* uefi: Do not set the release version
* unifying: Disable if the kernel has no CONFIG_HIDRAW support
-------------------------------------------------------------------
Tue Sep 19 13:45:59 UTC 2017 - dimstar@opensuse.org
- Update to version 0.9.7:
+ 10 months worth of bugfixing, integrating more vendor specific
Firmware update paths.
-------------------------------------------------------------------
Thu Mar 02 21:23:17 UTC 2017 - dimstar@opensuse.org
- Update to version 0.8.1:
+ Delete duplicate translations (gh#hughsie/fwupd#89).
+ Do not hardcode docbook2man path.
+ Fix fwupdmgr timeout with missing pending database.
+ Fix compiler warnings.
+ Fix a crash when enumerating devices on a Dell WLD15.
+ dell: don't initialize libsmbios on unsupported systems.
+ Do not fail to start on Dell hardware.
+ Adjust systemd confinement restrictions.
+ Do not dlclose modules when running under valgrind.
+ Really remove the NoNewPrivileges systemd confinement.
+ Release fwupd 0.8.1.
-------------------------------------------------------------------
Mon Feb 27 12:24:39 UTC 2017 - mpluskal@suse.com
- Update to version 0.8.0:
+ Show a different error when checking for updates while on
+ battery power (gh#hughsie/fwupd#68).
+ Clarify the test in --help and man page related to offline
+ (gh#hughsie/fwupd#69).
+ libdfu: Use a heuristic for the start address if the firmware
+ has no DfuSe footer.
+ dell: Don't return the address of a stack variable.
+ dell: Fix a possibly-impossible-to-hit buffer overrun.
+ close USB devices before error returns (gh#hughsie/fwupd#73).
+ Make libelf support optional.
+ Always make sure we're getting a C99 compiler.
+ Fix redeclaration of polkit autocleanup functions.
+ Uncomment SystemdService parameter in the dbus service file
+ (gh#hughsie/fwupd#74).
+ Make all providers and plugins share a GUsbContext.
+ Unexport libebitdo.
+ Move the plugins into plugin-specific directories.
+ Convert the providers to plugins to simplify code and for
+ future features.
+ Add support for Logitech Unifying devices.
+ Add a set of vfuncs that are run before and after a device
+ update.
+ Return the pending UEFI update when not on AC power.
+ Move the UPower functionality to a plugin.
+ Fix udev plugin loading.
+ fix dfu plugin loading.
+ Disable PrivateNetwork on systemd service.
+ Use more restrictive settings when running under systemd.
+ dell: add a new method for forcing a controller to flash mode.
+ Add VerifyUpdate to update the device checksums server-side.
+ Move the Option ROM parsing to the Udev plugin.
+ Move the device add delay to shared code.
+ Add initial skeleton for Intel Thunderbolt support.
+ unifying: Use the actual bootloader VID/PIDs when in firmware
+ mode.
+ Allow the metadata to match a version of fwupd and the existing
+ fw version.
+ Add fwupd_result_get_device_version_bootloader().
+ Fix the appstream-glib version guards.
+ dell: Add coldplug methods to let other plugins turn on
+ TBT/GPIO.
+ libdfu: Don't read data from some DfuSe targets.
+ Add the ability to run a prepare->exec->cleanup on coldplug.
+ Allow plugins to request that all plugins re-coldplug.
+ thunderbolt: Detecting new devices and add an actual device to
+ the daemon.
+ Add support for flashing the ChaosKey.
+ thunderbolt: add some guards around empty arrays.
+ dell: Adjust the coldplug preparation and cleanup sequence.
+ dell: Fix possible linker problem.
+ Revert "thunderbolt: add some guards around empty arrays".
+ Add fu_plugin_set_coldplug_delay() to allow hardware to
+ initialize if required.
+ altos: Add error checking when using termios.
+ ebitdo: Subclass FuDevice like the altos plugin.
+ altos: Set the flags in the init_real so they work for the
+ cmdline tool.
+ unifying: Subclass FuDevice like the altos plugin.
+ Include all debug messages when run with --verbose.
+ dell: introduce a standalone (noinst) tool to force mode
+ flashes.
+ Introduce plugin for Synaptics MST hubs.
+ synapticsmst: Add cascade support.
+ Only register the D-Bus service when all devices have been
+ added.
+ synapticsmst: Refactor away the global state.
+ synapticsmst: fix cascade support in the plugin.
+ Updates for thunderbolt plugin.
+ thunderbolt: Add special handling for safe mode on Dell systems
+ (gh#hughsie/fwupd#84).
+ synapticsmst: Iterate all nodes rather than hardcoding to 3.
+ synapticsmst: build GUID using dock type.
+ Add a new function fu_dell_supported to fu-dell-common.
+ synapticsmst: add a test suite.
+ synapticsmst: Fix up some trivial whitespace issues.
+ Fix a refcounting issue in the udev plugin.
- Add rpmlintrc untill security review is resolved
-------------------------------------------------------------------
Mon Jan 30 10:13:01 UTC 2017 - zaitor@opensuse.org
- Update to version 0.7.5:
+ Clean up PO files
+ Verify devices support updating in mode they are called.
+ Fix an assert when unlocking the dummy ESRT device
+ Don't create the UEFI dummy device if the unlock will happen on
+ next boot
+ dell: Match on TB16 as well
+ Fix a -fstack-protector-strong crash when uploading firmware
+ Enable the stack protection in local builds
+ dell: If running in test suite, don't try to get product ID
+ from sysfs
+ libfdfu: Show a warning when getting the alt-name failed
+ dfu: Fix listing devices using the ST reference bootloader
+ Show the nicely formatted target name for DfuSe devices
+ libdfu: Fix two possible critical warnings for corrupt USB
+ descriptors
+ libdfu: Correctly offset addresses when one zone has multiple
+ sectors
+ libdfu: Do not do GetStatus on dfuse upload
+ libdfu: Fix uploading from DfuSe devices
+ libdfu: Use the device offset when writing DfuSe firmware
+ libdfu: Add DfuAction enumerated value to represent a device
+ action
+ libdfu: Use an animated progress bar when performing DFU
+ operations
+ libdfu: Do not do a zero-byte download when in DfuSe mode
+ libdfu: Fix verification of written DfuSe firmware
+ libdfu: Ensure the device is open before claiming the interface
+ libdfu: Ensure the mode is set correctly when faking a runtime
+ libdfu: Re-get the quirks when the DfuDevice gets a new
+ GUsbDevice
+ libdfu: Add quirks for HydraBus as it does not have a DFU
+ runtime
+ libdfu: Match the device booloader or runtime VID and PID when
+ checking firmware
+ Add a 'replace-data' command to dfu-tool
+ string
+ libdfu: Add dfu_sector_get_zone() to get the continuous memory
+ zone number
+ libdfu: Wait for DNBUSY to be cleared when checking the DfuSe
+ status
+ libdfu: Correctly erase DfuSe devices
+ Enable hardening flags on more binaries
+ libdfu: Correctly set the element address when uploading from
+ DfuSe devices
- Add pkgconfig(gmodule-2.0) BuildRequires: Align with what
+ configure checks for.
- Add pkgconfig(libsmbios_c) BuildRequires: Support dell bios.
+ Unfortunatly, until we have fwup packaged and enabled, this will
+ not work.
- Add disabled pkgconfig(libtbtfwu): For future thunderbolt
+ support.
-------------------------------------------------------------------
Mon Jan 30 10:12:47 UTC 2017 - zaitor@opensuse.org
- Update to version 0.7.4:
+ Add a fallback for older appstream-glib releases
+ Write the ELF files with the correct section type
+ Fix libfwupd self tests when a host-provided fwupd is not
+ available
+ Add dfu_firmware_add_symbol()
+ Add the Altos symbol table to the DfuFirmware
+ Use the symtab to set the VID/PID from Altos IHEX firmware
+ images
+ Show the human-readable version in the 'dfu-tool dump' output
+ Allow specifying the argument to 'dfu-tool set-release' in
+ major.minor format.
+ sections
+ Support writing the IHEX symbol table
+ call
+ Load the symbol table from ELF firmware
+ Load the Altos USB descriptor from ELF files
+ Add DFU_CIPHER_KIND_RSA
+ Fix a possible crash when uploading firmware files using libdfu
-------------------------------------------------------------------
Mon Jan 30 10:12:28 UTC 2017 - zaitor@opensuse.org
- Update to version 0.7.3:
+ build: Fix gtk-doc build when srcdir != builddir
+ In get-details output, display the blob filename
+ Ensure the update ID is set when getting local firmware details
+ Use a private gnupg key store
+ Add support for installing against multiple devices from a CAB
+ file
+ Use the correct firmware blob when installing a composite
+ device update
+ in get-details output, display update_name rather than Unknown
+ Device
+ statements
+ Don't make failures critical while checking versions or locked
+ state
+ Show a more detailed error when installing firmware on the
+ wildcard
+ Add Dell TPM and TB15/WD15 support via new Dell provider.
+ file
+ Allow blacklisting devices by their GUID
+ header file
+ Add XPS 9250 to Dell TPM modeswitch blacklist
+ Only display flashes left in results output when it gets low.
+ Add a small library for talking with 0bitdo hardware
+ Add another compile warning and fix up any build failures
+ Embed fwupd version in generated libfwupd and libdfu
+ documentation
+ Update fwupdmgr manpage for new commands and arguments
+ build: Fix gtk-doc build when srcdir != builddir
+ online not offline
+ Get the firmware version correctly from 0Bitdo gamepads
+ Switch to the Amazon S3 CDN for firmware metadata
+ Fix writing 8Bitdo device firmware
+ be updated
+ Show the vendor flashing instructions when installing
+ Split out the DFU file formats to separate files
+ Add fwupd_result_remove_device_flag()
+ Add FU_DEVICE_FLAG_NEEDS_BOOTLOADER
+ get-updates output
+ Allow providers to export percentage completion
+ Add fwupd_client_get_status()
+ Handle the 8Bitdo bootloader in a better way
+ Show a progress notification when installing firmware
+ Add fwupd_result_get_unique_id()
+ Use the SHA1 hash of the local file data as the component
+ origin
+ Use the correct define prefix for FwupdDeviceFlags
+ libdfu: Fix hang when parsing corrupt IHEX files
+ Add a set-target-size command to dfu-tool
+ Support the 'DEVO' cipher kind in libdfu
+ Add a set-address command to dfu-util
+ Disable the Dell specific code by default
+ Conditionally enable all providers based upon what's installed
+ Add a summary of providers that are enabled from configure
+ Do not use the deprecated GNOME_COMPILE_WARNINGS
+ Ignore devices that do not add at least one GUID
+ Do not attempt to add DFU devices not in runtime mode
+ Save the unique ID in the pending database
+ libdfu: Add initial ELF reading and writing support
+ Add dfu_firmware_format_from_string()
+ Normalize the DfuFirmwareFormat enums
-------------------------------------------------------------------
Mon Jan 30 10:12:16 UTC 2017 - zaitor@opensuse.org
- Update to version 0.7.2:
+ Allow devices to have multiple assigned GUIDs
+ Only return updatable devices from GetDevices()
+ Add fu_device_get_alternate()
+ Allow metainfo files to match only specific revisions of
+ devices
+ Re-read flags for a device after a provider's unlock routine is
+ done
+ Test for a locked device when trying to install firmware update
+ Enforce allowing providers to take away flash abilities
+ Support returning multiple GUIDs from GetDetails
+ Add a GetDetailsLocal() method to eventually replace
+ GetDetails()
+ break
+ libdfu: Add DfuVersion enumerated values
+ libdfu: Show the DFU protocol version in 'dfu-tool list'
+ Only claim the DFU interface when required
-------------------------------------------------------------------
Mon Jan 30 10:11:59 UTC 2017 - zaitor@opensuse.org
- Update to version 0.7.1:
+ Fix libdfu CRC check for big endian architectures
+ Add dfu_image_get_element_default()
+ Fix libdfu CRC check for big endian architectures
+ Fix big endian issues when reading and writing DFU and DfuSe
+ files
+ Remove non-interactive pinentry setting from fu-keyring
+ Set the system's DMI product name as the DisplayName for UEFI
+ Re-order output of get-devices to be easier to read
+ Make the device display name nicer
+ update version
+ Return all update descriptions newer than the installed version
+ Add summary and name field for Rival SteelSeries
+ Fix a critical warning when restarting the daemon
+ Add a 'supported' flag to the FuDevice
+ Add fwupd_client_connect()
+ Add a 'monitor' debugging command for fwupdmgr
+ Add device-added, device-removed and device-changed signals
+ Match the AppStream metadata after a device has been adedd
+ Re-match devices when the AppStream metadata is updated
+ Show 'Unknow Device' in fwupdmgr when a device name is not set
+ Set the device description when parsing local firmware files
+ Add support for a new device field "Flashes Left".
+ src/Makefile.am: reshuffle so enableable bits are only
+ referenced when on
+ Add support for a --force flag to override provider warnings
-------------------------------------------------------------------
Mon Jan 30 10:11:48 UTC 2017 - zaitor@opensuse.org
- Update to version 0.7.0:
+ Use g_usb_context_wait_for_replug()
+ Run vendor plugins as required
+ Add a plugin for SteelSeries hardware
+ Add fwupd_device_flag_to_string()
+ Return the device flags when getting firmware details
+ Show device flags in 'fwupdmgr get-devices'
+ Add fwupd_trust_flag_to_string()
+ Export FwupdUpdateState in libfwupd
+ Export FwupdUpdateFlags in libfwupd
+ Add FwupdResult to libfwupd
+ Add a self test framework for libfwupd
+ Add FwupdClient to libfwupd
+ Use FwupdClient from libfwupd in fwupdmgr
+ Use libfwupd inside the daemon
+ Emit a FwupdClient::changed when the daemon emits this signal
+ Rename some of the new libfwupd API to align with the D-Bus
+ names
+ libdfu: Fix up some NULL/FALSE confusion
+ libfwup: Fix up some NULL/FALSE confusion
+ FwupdClient
+ Allow other checksum kinds in FwupdResult
+ Allow SHA-256 hashes when verifying
+ Show the checksum kind in the fwupdmgr output
+ Add Alienware to the version quirk table
+ Do not use /tmp for downloaded files
+ Add fwupd_result_has_device_flag()
+ Do not return updates that require AC when on battery
+ Connect to UPower at startup
+ Test that GPG key import actually was successful (or didn't
+ change a key already in the keyring)
+ Use g_auto() in FuKeyring
+ Return errors of the correct type when using libfwupd
+ Allow overridding the location of the pending database for
+ test suite
+ Allow overriding the location of the provider offline files for
+ test suite
+ Validate that the dbus system bus is available before running
+ libfwupd tests
+ Update README.md for changes that have happened in the project
+ Add some basic explanation of how to use fwupd with various
+ frontends
+ Split out the libdfu-devel package
+ Revert "Allow overridding the location of the pending database
+ for test suite"
+ Revert "Allow overriding the location of the provider offline
+ files for test suite"
+ Allow the test suite to run in %check
+ Generate gtk-doc documentation for libfwupd
-------------------------------------------------------------------
Mon Jan 30 10:11:29 UTC 2017 - zaitor@opensuse.org
- Update to version 0.6.3:
+ Require AC power before scheduling some types of firmware
+ update
+ Install the hardcoded firmware AppStream file
+ Correct the BCD version number for DFU 1.1
+ Add an unlock method for devices
+ Add ESRT enable method into UEFI provider.
+ Only read PCI OptionROM firmware when devices are manually
+ unlocked
+ Do not use deprecated API from libappstream-glib
+ Ignore the DFU runtime on the DW1820A
+ Export the attribute and quirk values in libdfu
+ Show ignored DFU devices in dfu-util, but not in fwupd
+ Allow defining update vfuncs with no runtime support
+ Revert "Allow defining update vfuncs with no runtime support"
+ Add a simple plugin infrastructure
-------------------------------------------------------------------
Mon Jan 30 10:10:00 UTC 2017 - zaitor@opensuse.org
- Update to version 0.6.2:
+ Add 'Created' and 'Modified' properties on managed devices
+ Fix get-results for UEFI provider.
+ Support vendor-specific UEFI version encodings
+ Move quirks directly into a single table and file.
-------------------------------------------------------------------
Mon Jan 30 10:09:48 UTC 2017 - zaitor@opensuse.org
- Update to version 0.6.1:
+ Only dump the profiling data when run with --verbose
+ Always persist ColorHug devices after replug
+ Do not misdetect different ColorHug devices
-------------------------------------------------------------------
Thu Dec 10 15:44:25 UTC 2015 - dimstar@opensuse.org
- Update to version 0.6.0:
+ Add support for updating USB devices with DFU
+ libdfu: Add support for DfuSe firmware
+ libdfu: Generate gtk-doc documentation
+ libdfu: Don't rely on specific hardware to be present
+ libdfu: Move the VID:PID checks from the tool to DfuDevice
+ libdfu: Use a custom error domain
+ Use the same device identification string format as Microsoft
+ libdfu: Fix crash when setting a target size
+ libdfu: Allow setting the alternate settings in DfuSe firmware
+ libdfu: Add a merge command to dfu-tool
+ libdfu: Allow choosing a different alt-setting when downloading
+ libdfu: Fix a crash when setting a NULL image name
+ libdfu: Correctly implement auto-boot in dfu_device_download()
+ libdfu: Check for extra args to dfu-tool convert
+ libdfu: Call the progress callback when doing detach
+ Ignore the DFU device detach:attach when verifying
+ libdfu: Require a --force flag to flash wildcard firmware
+ Use new API available in fwup 0.5
+ libdfu: Make the element address 32 bits in size
+ libdfu: Support the ST-specific bitCanAccelerate
+ libdfu: Only do a Detach notification if we're actually doing
to do it
+ libdfu: Use the progress bar for all uploads and downloads
+ libdfu: Improve the output of 'dfu-util list'
+ libdfu: Support download and upload to ST DfuSe devices
+ libdfu: Fix multi-interface devices like the Neo Freerunner
+ libdfu: Add a pkgconfig file
+ libdfu: Use signals to propagate device state
+ libdfu: Add a context object to handle device hotplug
+ libdfu: Add an example showing GObject Introspection
+ libdfu: Do not ref DfuDevice in DfuTarget so the auto-close
+ logic works
+ Close DFU devices as soon as possible after the transfer has
completed
+ Emit the changed signal after doing an update
+ Rescan the DFU device after replug to get the new version
+ libdfu: Add dfu_context_get_device_by_platform_id()
+ libdfu: Add dfu_device_get_runtime_release()
+ libdfu: Add dfu_device_get_display_name()
+ libdfu: Fix self tests after recent API change
+ Split out the DFU provider as a new file
+ libdfu: Copy the platform ID and invalidate the GUsbDevice when
removed
+ libdfu: Accept multiple spaces after the DfuSe sector name
+ libdfu: Verify the GUsbDevice is set before using it
+ libdfu: Remove the weak pointer when destroying the DfuTarget
+ libdfu: Fix dfu_device_wait_for_replug() so it can work with a
DfuContext
+ Export the AppStream ID when returning device results
+ Rescan the DFU device after firmware has been updated
+ libdfu: Handle cancellation with ctrl+c in dfu-tool
+ libdfu: Add a quirk to support DFU runtime-less devices
+ libdfu: Add an explicit 'attach' method
+ libdfu: Add dfu_firmware_get_image_by_name()
+ libdfu: Make reading and writing to targets easier to
+ understand
+ Fix compile with --disable-shared
+ libdfu: Display all the files shown with 'dfu-tool dump'
+ libdfu: Fix a few crashers found using afl
+ libdfu: Fix another bug discovered by the fuzzer
+ libdfu: Add commands to encrypt and decrypt firmware images
+ libdfu: Show better device errors
+ libdfu: Add DfuCipher which is a property on a target and a
+ firmware file
+ libdfu: Add support for the draft 'DFU Metadata Table
+ Specification'
+ libdfu: Only enumerate the DfuContext when required
+ libdfu: Fix several reported crashes in the inhex32 import code
+ Release fwupd 0.6.0
-------------------------------------------------------------------
Thu Dec 10 15:44:17 UTC 2015 - dimstar@opensuse.org
- Update to version 0.5.4:
+ Fix compile error against fwupdate git due to dropped
+ functions.
+ Use strerror() when printing errors from libfwupdate
+ Use new API available in fwup 0.5
+ Release fwupd 0.5.4
-------------------------------------------------------------------
Thu Dec 10 15:44:11 UTC 2015 - dimstar@opensuse.org
- Update to version 0.5.3:
+ Avoid seeking when reading the file magic during refresh
+ Do not assume that the compressed XML data will be NUL
+ terminated
+ debugging
+ Use the correct user agent string for fwupdmgr
+ Release fwupd 0.5.3
-------------------------------------------------------------------
Thu Dec 10 15:44:05 UTC 2015 - dimstar@opensuse.org
- Update to version 0.5.2:
+ Ensure D-Bus remote errors are registered at fwupdmgr startup
+ Show the dotted-decimal representation of the UEFI version
+ number
+ require appstream-glib 0.5.1
+ not found
+ When the version is from the 'FW' extension do not cache the
+ device
+ Support cabinet archives files with more than one firmware
+ Add the update description to the GetDetails results
+ Add profiling data to debug slow startup times
+ Fix verify-update to produce components with the correct
+ provide values
+ Clear the in-memory firmware store only after parsing a valid
+ XML file
+ Release fwupd 0.5.2
-------------------------------------------------------------------
Thu Dec 10 15:43:57 UTC 2015 - dimstar@opensuse.org
- Update to version 0.5.1:
+ Fix the error message when no devices can be updated
+ offline update: Use glib api for for reading symlinks
+ Release fwupd 0.5.1
-------------------------------------------------------------------
Thu Dec 10 15:43:51 UTC 2015 - dimstar@opensuse.org
- Update to version 0.5.0:
+ Do not merge the existing firmware metadata with the submitted
+ files
+ Raise the dep on GLib to support and use g_autoptr()
+ Do not reboot if racing with the PackageKit offline update
+ mechanism
+ Release fwupd 0.5.0
-------------------------------------------------------------------
Thu Dec 10 15:43:31 UTC 2015 - dimstar@opensuse.org
- Update to version 0.1.6:
+ Install fwupd and fwsignd into /usr/lib/$(triplet)/fwupd
+ instead.
+ Use the new secure metadata URI
+ Update the offline update service to invoke right command
+ Don't apply firmware if something else is processing the
+ offline update
+ Remove fwsignd, we have the LVFS now
+ Depend on appstream-glib >= 0.5.0
+ Add application metadata when getting the updates list
+ Simplify the version properties on devices to avoid complexity
+ and bugs
+ Release fwupd 0.1.6
-------------------------------------------------------------------
Thu Dec 10 15:43:03 UTC 2015 - dimstar@opensuse.org
- Update to version 0.1.5:
+ Allow fwupd to be autostarted by systemd
+ Sign the test binary with the correct key
+ Do not pre-convert the update description from AppStream XML
+ Devices with option ROM are always internal
+ Prefer the GUID from the firmware than the device
+ Allow no arguments to 'fwupdmgr verify-update' and use sane
+ defaults
+ Add the ability to remove a vendor on the LVFS site
+ Fix validation of written firmware
+ Move the verification and metadata matching phase to the daemon
+ Add a simple config file to store the correct LVFS download URI
+ Make parsing the option ROM runtime optional
+ Add a Raspberry Pi firmware provider
+ Use the AppStream 0.9 firmware specification by default
+ Generate the ColorHug test files at runtime
+ Release fwupd 0.1.5
-------------------------------------------------------------------
Thu Dec 10 15:42:07 UTC 2015 - dimstar@opensuse.org
- Update to version 0.1.4:
+ man/Makefile.am: Add --sgml to docbook2man invocation
+ Make statements about storing private keys stronger.
+ Provide a way for clients to add new firmware metadata to the
+ system cache
+ Fix fwupd-offline-update.service
+ Revert "man/Makefile.am: Add --sgml to docbook2man invocation"
+ Add a Udev firmware provider
+ Extract the version string from the ROM in PCI devices
+ Add a 'verify' command that verifies the cryptographic hash of
+ device firmware
+ Make the ROM parsing more robust and add self tests
+ Get the version number out from Intel VBIOS too
+ Provide a way to dump the option ROM using the command line
+ build: gusb is required even without colorhug
+ remove unused variables
+ Do not return NULL as a gboolean
+ Fix Intel VBIOS detection on Dell hardware
+ Do not use the subsystem information when constructing the fake
+ GUID
+ Actually parse the PCI option ROM
+ Accept multiple files at one time when using fwupdmgr dump-rom
+ verify run
+ Add a 'verify-update' command to fwupdmgr
+ Fix trivial bug when parsing firmware versions
+ Keep hitting the hardware until it gives us enough ROM
+ Make the version parsing more resilient to corrupt firmware
+ Fix the example .inf file to reflect reality
+ Fix ROM PPID searching to work for all ROMs
+ Move the LVFS website to the fwupd project
+ Add the ability to create detached signatures
+ Allow cab files to be saved
+ Add a simple signing server that operates on .cab files
+ Automatically download metadata using fwupdmgr if required
+ Don't call efibootmgr after fwupdate.
+ Associate the contact email address directly with the vendor
+ key
+ Use the actual LVFS GPG key
+ Allow running fwsignd as the non-root user
+ metadata
+ Do not merge existing LVFS metadata
+ Do not use the file hash when storing the LVFS submitted
+ firmwares
+ Move GetUpdates to the daemon
+ Change the DBus method for installing firmware to 'Install'
+ Allow installing an offline UEFI update without --offline
+ Add a 'fwupdmgr update' command to update all devices to latest
+ versions
+ 'update' command
+ Increase the size limit of firmware to 50Mb
+ Only sign files when the entire file has been copied
+ Fallback to offline install when calling the update argument.
+ Reload appstream data after refreshing.
+ Release fwupd 0.1.4
-------------------------------------------------------------------
Thu Dec 10 15:41:38 UTC 2015 - dimstar@opensuse.org
- Update to version 0.1.3:
+ Coldplug the devices before acquiring the well known name
+ Add an UNKNOWN status so we can return meaningful enum values
+ Run the offline actions using systemd when required
+ Get the firmware version from the device descriptors
+ Added syntax highlighting
+ More markup
+ Support OpenHardware devices using the fwupd vendor extensions
+ Move boolean properties on the device to a set of flags
+ Release fwupd 0.1.3
-------------------------------------------------------------------
Wed May 27 11:12:03 UTC 2015 - dimstar@opensuse.org
- Update to version 0.1.2:
+ More markup
+ Fixed typos and markup for executable
+ Add slovak translation
+ Add helper code to validate public key signatures
+ Decompress any firmware signatures in the .cab file
+ Verify firmware if a detached signature is present
+ Show the firmware trust status when doing GetDetails()
+ Only allow signed firmware to be upgraded without a password
+ Add some guidelines for vendors to README
+ Small grammar fix
+ Extract the .cat file alongside the firmware
+ Release fwupd 0.1.2
-------------------------------------------------------------------
Mon Apr 13 17:54:58 UTC 2015 - dimstar@opensuse.org
- Update to version fwupd_0_1_1:
+ Do not crash when there are no devices to return
+ Add a 'get-updates' command to fwupdmgr
+ Add and document the offline-update lifecycle
+ Create runtime directories if they do not exist
+ Create a libfwupd shared library
+ Export the status as an enumerated value rather than a string
+ Release fwupd 0.1.1
-------------------------------------------------------------------
Mon Apr 13 17:53:40 UTC 2015 - dimstar@opensuse.org
- Initial package.
View Git Blame Copy Permalink