rpm/gnucap
SHA256
1
0
Fork 0
forked from pool/gnucap
Code Pull Requests Activity
3465144f70
gnucap/gnucap-0.34-debian.patch

251 lines
8.6 KiB
Diff
Raw Blame History

--- gnucap-0.35/doc/whatisit.debian 2000-08-16 10:15:00.000000000 +0200
+++ gnucap-0.35/doc/whatisit 2007-02-14 13:04:05.000000000 +0100
@@ -1,4 +1,4 @@
-ACS is a general purpose circuit simulator. It performs nonlinear
+Gnucap is a general purpose circuit simulator. It performs nonlinear
dc and transient analyses, fourier analysis, and ac analysis
linearized at an operating point. It is fully interactive and
command driven. It can also be run in batch mode or as a server.
@@ -6,7 +6,7 @@
for the MOSFET (level 1-7) and diode are included in this
release.
-ACS is not based on Berkeley Spice, but some of the models have been
+Gnucap is not based on Berkeley Spice, but some of the models have been
derived from the Berleley models.
Since it is fully interactive, it is possible to make changes and
@@ -19,7 +19,7 @@
bipolar design.
In batch mode it is mostly Spice compatible, so it is often possible
-to use the same file for both ACS and Spice.
+to use the same file for both Gnucap and Spice.
The analog simulation is based on traditional nodal analysis with
iteration by Newton's method and LU decomposition. An event queue
@@ -36,11 +36,11 @@
experimental and needs work. There will be substantial improvements
in future releases.
-ACS also has a simple behavioral modeling language that allows
+Gnucap also has a simple behavioral modeling language that allows
simple behavioral descriptions of most components including capacitors
and inductors.
-ACS uses an object oriented approach to modeling. Complex models like
+Gnucap uses an object oriented approach to modeling. Complex models like
MOSFETS are made of simpler ones like resistors, capacitors, diodes,
and any other models that may already exist. The model designer does
not need to worry about details like convergence checking, bypass
@@ -54,17 +54,13 @@
If you are tired of Spice and want a second opinion, you want to
play with the circuit and want a simulator that is interactive, or
you want to study the source code and want something easier to
-follow than Spice, try ACS.
+follow than Spice, try Gnucap.
-ACS is an ongoing research project. It is being released in a
+Gnucap is an ongoing research project. It is being released in a
preliminary phase in hopes that it will be useful and that others
will use it as a thrust or base for their research. I also hope
for some comments that may help me direct my research.
-ACS ftp sites:
- ftp://sunsite.unc.edu/pub/Linux/apps/circuits/acs-0.27.tar.gz
- ftp://ftp.geda.seul.org/pub/geda/dist/acs-0.27.tar.gz
- http://www.geda.seul.org/dist/acs-0.27.tar.gz
Albert Davis
aldavis@ieee.org
--- gnucap-0.35/src/bm.cc.debian 2006-08-28 08:15:43.000000000 +0200
+++ gnucap-0.35/src/bm.cc 2007-02-14 13:04:05.000000000 +0100
@@ -141,7 +141,8 @@
/*--------------------------------------------------------------------------*/
void EVAL_BM_ACTION_BASE::tr_finish_tdv(ELEMENT* d, double val)const
{
- d->_y0 = FPOLY1(CPOLY1(ioffset(d->_y0.x), 0., val));
+ CPOLY1 cp1(ioffset(d->_y0.x), 0., val);
+ d->_y0 = FPOLY1(cp1);
tr_final_adjust(&(d->_y0), false);
}
/*--------------------------------------------------------------------------*/
--- gnucap-0.35/src/e_card.h.debian 2006-08-28 08:15:43.000000000 +0200
+++ gnucap-0.35/src/e_card.h 2007-02-14 13:04:05.000000000 +0100
@@ -35,6 +35,7 @@
class CARD_LIST;
class CS;
class COMMON_COMPONENT;
+CARD_LIST::fat_iterator findbranch(CS&,CARD_LIST::fat_iterator);
/*--------------------------------------------------------------------------*/
class CARD : public CKT_BASE {
private:
--- gnucap-0.35/src/d_vcvs.cc.debian 2006-08-28 08:15:43.000000000 +0200
+++ gnucap-0.35/src/d_vcvs.cc 2007-02-14 13:04:05.000000000 +0100
@@ -61,7 +61,8 @@
assert(_y0.f0 != LINEAR);
store_values();
q_load();
- _m0 = CPOLY1(_y0);
+ CPOLY1 cp1(_y0);
+ _m0 =cp1;
_m0 *= -_loss0;
}else{
assert(conchk(_loss0, 1./OPT::shortckt));
--- gnucap-0.35/src/u_sdp.h.debian 2006-08-28 08:15:43.000000000 +0200
+++ gnucap-0.35/src/u_sdp.h 2007-02-14 13:04:05.000000000 +0100
@@ -32,6 +32,9 @@
/*--------------------------------------------------------------------------*/
class OMSTREAM;
class CARD_LIST;
+class SDP;
+bool get(CS& cmd, const std::string& key, SDP* value,
+ AP_MOD mod, double scale);
/*--------------------------------------------------------------------------*/
class SDP {
friend bool get(CS& cmd, const std::string& key, SDP* value);
--- gnucap-0.35/src/e_storag.cc.debian 2006-08-28 08:15:43.000000000 +0200
+++ gnucap-0.35/src/e_storag.cc 2007-02-14 13:04:05.000000000 +0100
@@ -78,7 +78,8 @@
_dt = NOT_VALID;
_i0 = _q[0] = _q[1] = _q[2] = FPOLY1(0., 0., 0.);
_it1_f0 = 0.;
- _m1 = _m0 = CPOLY1(0., 0., 0.);
+ CPOLY1 cp1(0., 0., 0.);
+ _m1 = _m0 = cp1;
assert(_loss0 == 0.);
assert(_loss1 == 0.);
if (!using_tr_eval()) {
--- gnucap-0.35/src/d_admit.cc.debian 2006-08-28 08:15:43.000000000 +0200
+++ gnucap-0.35/src/d_admit.cc 2007-02-14 13:04:05.000000000 +0100
@@ -57,7 +57,8 @@
assert(_y0.f0 != LINEAR);
store_values();
q_load();
- _m0 = CPOLY1(_y0);
+ CPOLY1 cp1(_y0);
+ _m0 = cp1;
}else{
assert(_y0.f0 == LINEAR);
assert(_y0.f1 == value());
@@ -172,7 +173,8 @@
bool DEV_CPOLY_G::do_tr()
{
assert(_values);
- _m0 = CPOLY1(0., _values[0], _values[1]);
+ CPOLY1 cp1(0., _values[0], _values[1]);
+ _m0 = cp1;
return do_tr_con_chk_and_q();
}
/*--------------------------------------------------------------------------*/
@@ -195,7 +197,8 @@
}
}
trace2("", _values[0], c0);
- _m0 = CPOLY1(0., c0, _values[1]);
+ CPOLY1 cp1(0., c0, _values[1]);
+ _m0 = cp1;
return do_tr_con_chk_and_q();
}
--- gnucap-0.35/src/e_compon.h.debian 2006-08-28 08:15:43.000000000 +0200
+++ gnucap-0.35/src/e_compon.h 2007-02-14 13:04:05.000000000 +0100
@@ -43,6 +43,9 @@
}
/*--------------------------------------------------------------------------*/
enum {CC_STATIC=27342}; // mid-sized arbitrary positive int
+class COMMON_COMPONENT;
+void attach_common(COMMON_COMPONENT* c, COMMON_COMPONENT** to);
+void detach_common(COMMON_COMPONENT** from);
// pass this as an argument to a common constructor to mark it as static,
// so it won't be deleted
/*--------------------------------------------------------------------------*/
--- gnucap-0.35/src/d_cap.cc.debian 2006-08-28 08:15:43.000000000 +0200
+++ gnucap-0.35/src/d_cap.cc 2007-02-14 13:05:47.000000000 +0100
@@ -47,7 +47,8 @@
_i0.x = _y0.x;
_i0.f0 = differentiate();
_i0.f1 = tr_c_to_g(_q[0].f1, _i0.f1);
- _m0 = CPOLY1(_i0);
+ CPOLY1 cp1(_i0);
+ _m0 = cp1;
return converged();
}
/*--------------------------------------------------------------------------*/
@@ -191,7 +192,8 @@
assert(_vi0[i] == _vi0[i]);
}
- _m0 = CPOLY1(0., _vi0[0], _vi0[1]);
+ CPOLY1 cp1(0., _vi0[0], _vi0[1]);
+ _m0 = cp1;
return do_tr_con_chk_and_q();
}
/*--------------------------------------------------------------------------*/
--- gnucap-0.35/src/l_timer.h.debian 2006-08-28 08:15:43.000000000 +0200
+++ gnucap-0.35/src/l_timer.h 2007-02-14 13:04:05.000000000 +0100
@@ -26,6 +26,8 @@
#define U_TIMER_H
#include "io_.h"
/*--------------------------------------------------------------------------*/
+class TIMER;
+TIMER operator-(const TIMER&,const TIMER&);
class TIMER {
private:
enum {_T_NAME_LEN = 8};
--- gnucap-0.35/modelgen/mg_.h.debian 2006-08-28 07:45:36.000000000 +0200
+++ gnucap-0.35/modelgen/mg_.h 2007-02-14 13:04:05.000000000 +0100
@@ -120,7 +120,7 @@
}
T* p = new T(file);
{if (!file.stuck(&here)) {
- _list.push_back(p);
+ this->_list.push_back(p);
}else {
delete p;
file.warn(0, "not valid here");
@@ -141,7 +141,7 @@
int here = file.cursor();
T* m = new T(file);
{if (!file.stuck(&here)) {
- _list.push_back(m);
+ this->_list.push_back(m);
}else{
delete m;
file.warn(0, "what's this??");
--- gnucap-0.35/examples/runall.debian 2000-09-05 06:22:00.000000000 +0200
+++ gnucap-0.35/examples/runall 2007-02-14 13:04:05.000000000 +0100
@@ -1,16 +1,16 @@
-#
-$1 -b eq2-145.ckt
-$1 -b eq2-289.ckt
-$1 -b eq2-577.ckt
-$1 -b eq3-1153.ckt
-$1 -b eq4-2305.ckt
-$1 -b eqboost.ckt
-$1 -b eqflat.ckt
-$1 -b eqmodify.ckt
-$1 -b killzap.ckt
-$1 -b nmos100.ckt
-$1 -b nmos18.ckt
-$1 -b nmos30.ckt
-$1 -b nmp100.ckt
-$1 -b opamp-ol.ckt
-$1 -b opamp-vf.ckt
+#!/bin/sh
+gnucap -b eq2-145.ckt
+gnucap -b eq2-289.ckt
+gnucap -b eq2-577.ckt
+gnucap -b eq3-1153.ckt
+gnucap -b eq4-2305.ckt
+gnucap -b eqboost.ckt
+gnucap -b eqflat.ckt
+gnucap -b eqmodify.ckt
+gnucap -b killzap.ckt
+gnucap -b nmos100.ckt
+gnucap -b nmos18.ckt
+gnucap -b nmos30.ckt
+gnucap -b nmp100.ckt
+gnucap -b opamp-ol.ckt
+gnucap -b opamp-vf.ckt
View Git Blame Copy Permalink