From b5230423a0c1b1b4b8dbc94adeaaf496648e3f13c9f369380a408fd28a1d53f0 Mon Sep 17 00:00:00 2001 From: OBS User autobuild Date: Tue, 2 Nov 2010 13:41:23 +0000 Subject: [PATCH] Autobuild autoformatter for 51868 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/hostap-utils?expand=0&rev=8 --- hostap-utils.spec | 411 +--------------------------------------------- 1 file changed, 3 insertions(+), 408 deletions(-) diff --git a/hostap-utils.spec b/hostap-utils.spec index 4cafddc..0dd33d1 100644 --- a/hostap-utils.spec +++ b/hostap-utils.spec @@ -1,7 +1,7 @@ # # spec file for package hostap-utils (Version 0.4.7) # -# Copyright (c) 2008 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -22,9 +22,9 @@ Name: hostap-utils BuildRequires: openssl-devel Summary: Tools for Prism2 cards Version: 0.4.7 -Release: 179 +Release: 186 Group: Hardware/Wifi -License: GPL v2 or later +License: GPLv2+ BuildRoot: %{_tmppath}/%{name}-%{version}-build #Provides: #Requires: @@ -71,408 +71,3 @@ rm -rf $RPM_BUILD_ROOT %doc README ChangeLog %changelog -* Tue Sep 23 2008 ro@suse.de -- drop madwifi from buildrequires (not needed here) -* Wed Mar 14 2007 jg@suse.de -- split hostap-utils off into own package -* Mon Sep 18 2006 jg@suse.de -- hostap-utils: Fixed usage of uninitialised variable (bug 184410) -- hostapd: Update to version 0.4.9, changes: - * added a new configuration option, eapol_version, that can be - used to set EAPOL version to 1 (default is 2) to work around - broken client implementations that drop EAPOL frames which use - version number 2 [Bug 89] - * fixed EAP-MSCHAPv2 message length validation - * fixed stdarg use in hostapd_logger(): if both stdout and syslog - logging was enabled, hostapd could trigger a segmentation fault - in vsyslog on some CPU -- C library combinations -* Sun Feb 05 2006 ro@suse.de -- use madwifi-devel in BuildRequires -* Sun Feb 05 2006 aj@suse.de -- Remove BuildRequires on km_wlan. -* Wed Jan 25 2006 mls@suse.de -- converted neededforbuild to BuildRequires -* Mon Nov 21 2005 jg@suse.de -- hostapd: update to 0.4.7, changes: - * driver_wired: fixed EAPOL sending to optionally use PAE group - address as the destination instead of supplicant MAC address - * driver_madwifi: configure driver to use TKIP countermeasures in - order to get correct behavior - * driver_madwifi: added support for madwifi-ng -- hostapd: remove obsolete madwifi patch -- hostapd: updated config file -- hostap-utils: update to 0.4.7 (no changes) -- use %%{jobs} -* Tue Nov 08 2005 jg@suse.de -- do not build as root -* Fri Nov 04 2005 jg@suse.de -- hostapd, update to 0.4.6, changes: - * added support for replacing user identity from EAP with RADIUS - User-Name attribute from Access-Accept message, if that is included, - for the RADIUS accounting messages (e.g., for EAP-PEAP/TTLS to get - tunneled identity into accounting messages when the RADIUS server - does not support better way of doing this with Class attribute) - * driver_madwifi: fixed EAPOL packet receive for configuration where - ath# is part of a bridge interface - * added a configuration file and log analyzer script for logwatch - * fixed EAPOL state machine step function to process all state - transitions before processing new events; this resolves a race - condition in which EAPOL-Start message could trigger hostapd to send - two EAP-Response/Identity frames to the authentication server -- hostapd: added support for madwifi-ng -- removed hostap-driver, is part of the kernel now -* Thu Oct 13 2005 jg@suse.de -- hostapd: update to 0.4.5, changes (shortened): - * added client CA list to the TLS certificate request in order to - make it easier for the client to select which certificate to use - * added experimental support for EAP-PSK - * added support for WE-19 (hostap, madwifi) - * fixed PMKSA caching to copy User-Name and Class attributes so - that RADIUS accounting gets correct information - * start RADIUS accounting only after successful completion of WPA - 4-Way Handshake if WPA-PSK is used - * fixed PMKSA caching for the case where - * EAP-PAX is now registered as EAP type 46 - * fixed EAP-PAX MAC calculation - * fixed EAP-PAX CK and ICK key derivation -- hostap-driver: update to 0.4.5, changes: - * added support for WE-19 -- hostap-utils: update to 0.4.0 (no real changes) -* Thu Sep 08 2005 jg@suse.de -- fixed file permissions -* Mon Aug 22 2005 jg@suse.de -- hostap-driver: update to 0.4.4, changes: - * added support for pcmcia changes in Linux 2.6.13 - * added support for creating sysfs device files (Linux 2.6.x) - * fixed power save processing for PS-Poll frames with PwrMgmt flag - set (this was causing "wifi0: invalid skb->cb magic" errors) - * fixed linking both hostap_cs and hostap_pci to kernel - * filter out sequential disconnect events to make race condition with - received EAPOL frames less likely to happen (this improves - authentication success rate with some APs that send EAPOL frames - very quickly after the (re)association response) - * added support for setting channel mask for scan requests -* Mon Aug 08 2005 ro@suse.de -- fix build with current wireless drivers -* Mon Jul 11 2005 jg@suse.de -- hostapd: update to 0.3.9, changes: - * fixed a bug which caused some RSN pre-authentication cases to - use freed memory and potentially crash hostapd - * fixed private key loading for cases where passphrase is not set - * fixed WPA2 to add PMKSA cache entry when using integrated EAP - authenticator - * driver_madwifi: fixed pairwise key removal to allow WPA reauth - without disassociation - * fixed RADIUS attribute Class processing to only use - Access-Accept packets to update Class; previously, other RADIUS - authentication packets could have cleared Class attribute - * fixed PMKSA caching (EAP authentication was not skipped correctly - with the new state machine changes from IEEE 802.1X draft) -- hostap-driver: update to 0.3.9, changes: - * fixed background scans (iwlist wlan0 scan) not to break data - connection when in host_roaming 2 mode - * fixed beacon frame when moving from monitor mode to master mode -* Wed Jun 08 2005 meissner@suse.de -- adjust hostapd/Makefile to be able to correctly - get passed RPM_OPT_FLAGS. -* Wed Jun 08 2005 meissner@suse.de -- Use RPM_OPT_FLAGS. -* Fri Mar 11 2005 jg@suse.de -- hostap-driver: - * create sysfs links for ethernet device, not IEEE80211 device - * disabled sysfs links for hostap_cs, as it breaks association -* Thu Feb 24 2005 jg@suse.de -- hostap-driver: fixed sysfs support -* Mon Feb 14 2005 jg@suse.de -- hostapd, hostap-utils, hostap-driver: update to 0.3.7 final - (no real changes, just version rename) -* Mon Feb 07 2005 jg@suse.de -- disabled support for madwifi on non x86(-64) platforms -* Mon Feb 07 2005 jg@suse.de -- hostapd: update to version 0.3.7-pre, changes (shortened): - * added support for configuring a forced PEAP version based on - the Phase 1 identity - * fixed PEAPv1 to use tunneled EAP-Success/Failure instead of - EAP-TLV to terminate authentication - * driver_madwifi: filter wireless events based on ifindex to - allow more than one network interface to be used - * added support for configuring multiple allowed EAP types for - Phase 2 authentication (EAP-PEAP, EAP-TTLS) - * added support for EAP-PEAP in the integrated EAP authenticator - * added support for EAP-GTC in the integrated EAP authenticator - * added support for configuring list of EAP methods for Phase 1 - so that the integrated EAP authenticator can, e.g., use the - wildcard entry for EAP-TLS and EAP-PEAP - * added support for EAP-TTLS in the integrated EAP authenticator - * added support for EAP-SIM in the integrated EAP authenticator - * added support for using hostapd as a RADIUS authentication - server with the integrated EAP authenticator taking care of - EAP authentication - * driver_madwifi: fixed group key setup and added get_ssid method - * added support for EAP-MSCHAPv2 in the integrated EAP - authenticator - * added support for integrated EAP-TLS authentication - * added support for reading PKCS#12 (PFX) files (as a replacement - for PEM/DER) to get certificate and private key (CONFIG_PKCS12) - * added support for Acct-{Input,Output}-Gigawords - * added support for Event-Timestamp (in RADIUS Accounting-Requests) - * added support for RADIUS Authentication Client MIB (RFC2618) - * added support for RADIUS Accounting Client MIB (RFC2620) - * made EAP re-authentication period configurable - * fixed EAPOL reauthentication to trigger WPA/WPA2 reauthentication - * added support for multiple WPA pre-shared keys - * added support for multiple driver interfaces to allow hostapd - to be used with other drivers - * added wired authenticator driver interface - * added madwifi driver interface - * fixed RADIUS reconnection after an error in sending interim - accounting packets - * added hostapd control interface for external programs - * finished update from IEEE 802.1X-2001 to IEEE 802.1X-REV - (now d11) - * added support for strict GTK rekeying - * added Prism54 driver interface - * dual-licensed hostapd (GPLv2 and BSD licenses) - * added integrated EAP authenticator that can be used instead of - external RADIUS authentication server -- hostap-driver: update to version 0.3.7-pre, changes: - * improved suspend operation: disable firmware (hostap_cs) and - generate disconnect event to trigger wpa_supplicant to - reassociate immediately after resume - * added new ioctl command for hostapd to clear station specific - accounting data when starting a new accounting session - * added support for the special initialization needed for the - wireless part of multi-function SanDisk ConnectPlus CF cards - (manfid 0xd601, 0x0101) - * fixed card enabling after firmware download in case any of the - netdevs were up when the download was started - * added support for Linux wireless extension v17 -- hostap-utils: update to version 0.3.7-pre (no changes) -- added all example configuration files -* Thu Jan 13 2005 jg@suse.de -- hostapd: update to version 0.2.6, changes: - * fixed RADIUS accounting to generate a new session id for cases - where a station reassociates without first being complete - deauthenticated - * fixed STA disassociation handler to mark next timeout state to - deauthenticate the station, i.e., skip long wait for inactivity - poll and extra disassociation, if the STA disassociates without - deauthenticating - * removed 'daemonize' configuration file option since it has not - really been used at all for more than year -- hostap-utils: update to version 0.2.6, changes: - * split_combined_hex: updated to use head/tail -n argument -- hostap-driver: update to version 0.2.6, changes: - * added support for changed PCI API in Linux 2.6.10-rc1 and newer -* Tue Nov 02 2004 jg@suse.de -- hostapd: update to version 0.2.5, changes: - * fixed EAPOL reauthentication to trigger WPA/WPA2 - reauthentication - * fixed EAPOL state machine to stop if STA is removed during - eapol_sm_step(); this fixes at least one segfault triggering - bug with IEEE 802.11i pre-authentication - * fixed an alignment issue that could cause SHA-1 to fail on some - platforms (e.g., Intel ixp425 with a compiler that does not - 32-bit align variables) - * fixed RADIUS reconnection after an error in sending interim - accounting packets -- hostap-driver: update to version 0.2.5, changes: - * fixed card enabling after firmware download in case any of the - netdevs were up when the download was started - * fixed netif_carrier_on/off() calls to leave carrier on for - Master mode; previously this may have been left off in some - cases which could prevent packet bridging with new kernel - versions -- hostap-driver: enabled support for non-volatile firmware download -* Fri Oct 01 2004 jg@suse.de -- fixed sysfs device/driver links (bug 46633) -* Mon Aug 09 2004 jg@suse.de -- fixed filelist -* Fri Aug 06 2004 jg@suse.de -- do not install /etc/pcmcia/hostap_cs.conf.example anymore -* Thu Jul 29 2004 jg@suse.de -- update hostapd to 0.2.4: - * fixed some accounting cases where Accounting-Start was sent - when IEEE 802.1X port was being deauthorized - * modified RADIUS client to re-connect the socket in case of - certain error codes that are generated when a network - interface state is changes (e.g., when IP address changes or - the interface is set UP) - * fixed couple of cases where EAPOL state for a station was freed - twice causing a segfault for hostapd - * fixed couple of bugs in processing WPA deauthentication - * fixed WPA/WPA2 group rekeying to use key index correctly (GN/GM) - * fixed group rekeying to send zero TSC in EAPOL-Key messages to - fix cases where STAs dropped multicast frames as replay attacks - * added support for copying RADIUS Attribute 'Class' from - authentication messages into accounting messages - * send canned EAP failure if RADIUS server sends Access-Reject - without EAP message (previously, Supplicant was not notified - in this case) - * fixed mixed WPA-PSK and WPA-EAP mode to work with WPA-PSK -- update hostap-utils to 0.2.4 (no changes) -- update hostap-driver to 0.2.4: - * fixed wlan#/wifi# interface packet counters (both are supposed - to see data packets once; wlan# was counting TX twice and wifi# - did not count TX or RX at all for most cases) - * fixed compilation with PRISM2_NO_STATION_MODES defined - * fixed MAC address changing to update address for wifi# interface - (without this, at least Master mode did not work correctly when - MAC address was changed for wlan#) - * fixed inner-BSS bridge (ap_bridge_packets=1) not to bridge - packets to unauthorized ports when IEEE 802.1X/WPA is used - * merged CryptoAPI versions of WEP/TKIP/CCMP from the wireless-2.6 - BitKeeper tree (not used by default, can be enabled by defining - HOSTAP_USE_CRYPTO_API) - * fixed a buffer overflow in TKIP encryption (hostap_crypt_tkip - module) on big endian hosts -* Mon May 17 2004 jg@suse.de -- update hostapd to 0.2.1 (shortened): - * added WPA and IEEE 802.11i/RSN (WPA2) Authenticator - functionality - * added support for Acct-Interim-Interval - * added new hostapd.conf variable, nas_identifier, that can be - used to add an optional RADIUS Attribute, NAS-Identifier, into - authentication and accounting messages - * added support for Accounting-On and Accounting-Off messages -- update hostap-utils to 0.2.1: - * hostap_rid: fixed handling of failed RID reads - * fixed prism2_srec not to allow combination of volatile and - non-volatile firmware images (they will corrupt the card flash) - * added support for loading PRI firmware for cards without PRI - * fixed volatile download of combined primary and secondary - firmware to start running the secondary firmware - * added support for dumping PDA in text format and overriding PDA - with text and binary files (prism2_srec options -D, -P, and -O) -- update hostap-driver to 0.2.1 (shortened): - * allow hostapd to send encrypted frames using wlan#ap interface - * added driver support for hostapd WPA Authenticator - * fixed TKIP get sequence number - * clear IFF_RUNNING and generate linkwatch events based on - association status in Managed mode - * added alternative TKIP implementation which uses Michael MIC - implementation in CryptoAPI instead of Host AP specific - implementation - * added support for RSN (IEEE 802.11i/WPA2) - * dropped support for Linux 2.2.x and old Linux 2.4.x kernels - * fixed hostap_cs unregistration when PC Card is removed while - Host AP interfaces are still up - * restructured Linux net device use to be more like IEEE 802.1q - VLAN - * disable wlan hardware when radio netdev (wifi#) is down - * fixed Shared Key authentication when using host_decrypt and - kernel driver based IEEE 802.11 management - * added crypto hooks for full MSDU encrypt/decrypt - * fixed iwspy support with Linux wireless ext v16 - * fixed IEEE 802.11 defragmentation when using host-based WEP - decryption and bridging packets between two associated STAs - * added driver support for WPA Authenticator/Supplicant - * added minimal support for ethtool -- fixed bug in hostap-driver Makefile which prevented hostap_cs.ko - from being built -* Sat Apr 03 2004 jg@suse.de -- fixed sysfs support in hostap driver (bug #37278) -* Tue Mar 30 2004 jg@suse.de -- skipping build for UM kernels (bug #37448) -- skipping build of hostap_cs in case PCMCIA is disabled in the - kernel config (also bug #37448) -* Tue Mar 02 2004 jg@suse.de -- typo fix in makefile -* Sun Feb 29 2004 jg@suse.de -- update to hostapd-0.1.3, changes: - * fixed event loop to call signal handlers only after returning from - the real signal handler - * reset sta->timeout_next after successful association to make sure - that the previously registered inactivity timer will not remove the - STA immediately (e.g., if STA deauthenticates and re-associates - before the timer is triggered). -- update to hostap-driver-0.1.3, changes: - * fixed IEEE 802.11 defragmentation when using host-based WEP - decryption and bridging packets between two associated STAs - (this caused a kernel crash in dev_queue_xmit()) - * reconfigure fragmentation threshold after Port0 enable to work around - issues with some STA firmware versions forgetting the configured - value - * restore retry limit after card reset - * update STA RX statistics also in Repeater mode - * hostap_cs: fixed CS reset when the netdev is down: need to reset - hardware even in this case to make resume from suspend mode work - correctly - * fixed error reporting from Genesis mode download - * changed README to use 'make' instead of 'make pccard/pci/plx' when - building the driver - * replaced CardServices() calls with calls to matching pcmcia_*() - functions (required for Linux 2.6.2 and newer) - * fixed module reference counting of hostap_crypt_wep module for - Linux 2.6.x (i.e., prevent it from be unloaded if it is still used) -- update to hostap-utils-0.1.3, changes: - * prism2_srec: ignore PDR 0x0413 if it is not used (this allows some - of the newer STA firmware 1.8.x versions to be downloaded) - * prism2_srec: fixed combined RAM download of PRI and STA firmwares - to use correct start address -- added driver race condition fix from hostap CVS -- rewrote driver Makefile -* Mon Jan 26 2004 jg@suse.de -- removed kernel-source from neededforbuild -* Fri Jan 09 2004 jg@suse.de -- driver update to version 0.1.2, from ChangeLog - * fixed RTS and Fragmentation thresholds after hw reset - * fixed Managed/Ad-hoc mode authentication with Open System - algorithm when using old (e.g., version 0.6.2) STA firmware - * fixed iwspy support with Linux wireless ext v16 - * fixed WDS interface selection to not select non-WDS interface - * fixed wlan#wds#, wlan#ap, and wlan#sta netdevice unregistration - * added PCI ID for Prism3 mini-PCI [hostap_pci] - * fixed yield() backward compatibility code for Linux 2.4.0-18 - * added support for 32-bit CommTallies (if STA f/w >= 0.8.2) - * update counters used for /proc/net/hostap/wlan#/stats periodically - * fixed CommTallies handling on big endian platforms - * added support for Primary-only mode - * fixed failure handling in PCI probe not to crash kernel [hostap_pci] - * merged hostap_crypt module into hostap module - * fixed inactivity polling of stations that are in power saving mode -- utils update to version 0.1.2, from ChangeLog - * fixed prism2_srec not to allow combination of volatile and - non-volatile firmware images (they will corrupt the card flash) - * reduced verbosity of prism2_srec - * added support for volatile download of Primary firmware using - Genesis mode (this is available only for hfa3842; hfa3841, i.e., old - Prism2 cards, require hardware changes for similar function) - ('-g' command line option in prism2_srec) - * added support for merging two srec file (Primary and Secondary(STA) - firmware) into one non-volatile (flash) download -- hostapd update to version 0.1.0 -* Mon Sep 08 2003 agruen@suse.de -- km_hostap-HZ.diff: Adapt to dynamic-hz kernel patch. -* Mon Jul 28 2003 jg@suse.de -- update to version 0.0.4, from ChangeLog (shortened) - * moved non-hardware specific RX code from hostap_hw.c into a new file, - hostap_80211_rx.c and removed Prism2 RX descriptor dependency from - hostap_ap.c - * fixed number of compilation issues (RH9 kernel, *.mod files to local - directory, 2.4.x compilation with CONFIG_MODVERSIONS, external - pcmcia-cs) - * removed extra tasklet that was used with TX callback handler - * update basic rate set automaticallyt when changing supported rate set - * fixed compilation without Linux Wireless Extensions - * use less aggressive transmit rate decreasing algorithm - * fixed inactivity expiration of stations using power saving mode - * fixed sending of IEEE 802.1X frames to buffer them if STA is in power - saving mode - * removed backward compatibility code for Linux Wireless Extensions - versions older than ver 9 - * added module parameter 'dev_template' for setting the device name - template (default: 'wlan%%d'); this is for hostap_{cs,pci,plx}.o - * changed monitor mode to use pseudo-IBSS mode instead of Host AP mode - to avoid sending out Beacon and ProbeResp frames - * fixed enh_sec setting (hide SSID) to reset Port0 so that the changes - to the beacon are taken into use immediately - * added support for selection which authentication algorithm to use - in station mode - * added support for manual scan and roaming mode (managed/ad-hoc); - * process beacon frames in kernel driver even when hostapd is used - * removed TX power controlling (iwconfig txpower) -* Tue Jun 17 2003 jg@suse.de -- added directory /usr/src/kernel-modules to filelist -* Wed Jun 04 2003 jg@suse.de -- Initial package