forked from pool/ignition
af996b5cb5
* dracut: make hv_utils module optional * Fix build on 32-bit systems * Doc updates * build(deps) updates * providers/qemu: read modprobe path from distro package * Add support for Hyper-V platform * internal/exec: don't relabel a mountpoint that already exists * internal/exec/util: check if unit exists before disabling * Dockerfile.validate: update to Fedora 38 * generate: simplify build of doc generator * platform: allow provider fetch to save files to write from files stage * templates: update CI ratchet procedure for Butane spec stabilization * go.mod: add deep-copy package * providers: rename noop to metal * platform: drop function pointer indirection for fetch method * providers: add Config wrapper structs for cmdline and system providers * internal: empty out providers base package * internal: move provider registrations out of platforms package * templates/stabilize-checklist: disable tests using exp Butane config * providers/vmware: rename some structs * internal: move stage registration into a separate package * platform: avoid needless function pointer indirection in methods * tests: port to xfsprogs 5.19+ * test: ShellCheck fixes OBS-URL: https://build.opensuse.org/package/show/devel:kubic:ignition/ignition?expand=0&rev=108
1476 lines
68 KiB
Plaintext
1476 lines
68 KiB
Plaintext
-------------------------------------------------------------------
|
|
Thu Jul 13 20:08:51 UTC 2023 - iforster@suse.com
|
|
|
|
- Update to version 2.16.2:
|
|
* dracut: make hv_utils module optional
|
|
* Fix build on 32-bit systems
|
|
* Doc updates
|
|
* build(deps) updates
|
|
* providers/qemu: read modprobe path from distro package
|
|
* Add support for Hyper-V platform
|
|
* internal/exec: don't relabel a mountpoint that already exists
|
|
* internal/exec/util: check if unit exists before disabling
|
|
* Dockerfile.validate: update to Fedora 38
|
|
* generate: simplify build of doc generator
|
|
* platform: allow provider fetch to save files to write from files stage
|
|
* templates: update CI ratchet procedure for Butane spec stabilization
|
|
* go.mod: add deep-copy package
|
|
* providers: rename noop to metal
|
|
* platform: drop function pointer indirection for fetch method
|
|
* providers: add Config wrapper structs for cmdline and system providers
|
|
* internal: empty out providers base package
|
|
* internal: move provider registrations out of platforms package
|
|
* templates/stabilize-checklist: disable tests using exp Butane config
|
|
* providers/vmware: rename some structs
|
|
* internal: move stage registration into a separate package
|
|
* platform: avoid needless function pointer indirection in methods
|
|
* tests: port to xfsprogs 5.19+
|
|
* test: ShellCheck fixes
|
|
|
|
-------------------------------------------------------------------
|
|
Thu Mar 9 17:55:16 UTC 2023 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- Add `dasd_mod.dasd=autodetect` to kernel command line parameters
|
|
(for Ignition device support on S/390) [boo#1207903]
|
|
|
|
-------------------------------------------------------------------
|
|
Mon Feb 27 13:09:37 UTC 2023 - iforster@suse.com
|
|
|
|
- Update to version 2.15.0:
|
|
* Features
|
|
* Support offline Tang provisioning via pre-shared advertisement (3.4.0)
|
|
* Allow enabling discard passthrough on LUKS devices (3.4.0)
|
|
* Allow specifying arbitrary LUKS open options (3.4.0)
|
|
* Ship aarch64 macOS ignition-validate binary in GitHub release artifacts
|
|
* Changes
|
|
* Mark the 3.4.0 config spec as stable
|
|
* No longer accept configs with version 3.4.0-experimental
|
|
* Create new 3.5.0-experimental config spec from 3.4.0
|
|
* Fail if files/links/dirs conflict with systemd units or dropins
|
|
* Warn if template for enabled systemd instance unit has no Install section
|
|
* Warn if filesystem overwrites partitioned disk
|
|
* Warn if wipeTable overwrites a filesystem that would otherwise be reused
|
|
* Warn if user/group specified for hard link
|
|
* Install ignition-apply in /usr/libexec
|
|
* Allow distros to add Ignition command-line arguments from a unit drop-in
|
|
* Convert NEWS to Markdown and move to docs site
|
|
* Require Go 1.18+
|
|
* Bug fixes
|
|
* Don't overwrite LUKS1 volume when storage.luks.wipeVolume is false
|
|
* Request network when custom Clevis config has needsNetwork set
|
|
* Fix creating LUKS volume with custom Clevis config that uses TPM2
|
|
* Avoid logging spurious error when a LUKS volume wasn't previously formatted
|
|
* Fix version string in ignition-validate release container
|
|
* Fix reproducibility of systemd preset file in ignition-apply output
|
|
* Document that user/group fields aren't applied to hard links
|
|
* Clarify spec docs for files/directories/links group fields
|
|
- Modified 0002-allow-multiple-mounts-of-same-device.patch to add
|
|
new Ignition spec version
|
|
- Add 0001-ignore-missing-qemu-blockdev.patch [bsc#1207679] to
|
|
support booting without configuration device on s390x.
|
|
- Move all /usr/libexec contents to %sbindir
|
|
|
|
-------------------------------------------------------------------
|
|
Tue Aug 2 11:28:11 UTC 2022 - Fabian Vogt <fvogt@suse.com>
|
|
|
|
- ignition-enable-network.sh: Use /lib/dracut/hooks directly
|
|
instead of the usr-merged location which isn't available everywhere
|
|
(bsc#1201957)
|
|
|
|
-------------------------------------------------------------------
|
|
Wed May 18 12:37:46 UTC 2022 - iforster@suse.com
|
|
|
|
- Update to version 2.14.0:
|
|
* NEWS: update v2.14.0
|
|
* docs/operator-notes: add section on provisioning secrets
|
|
* Dockerfile.validate: build with Fedora 36
|
|
* internal/resource: fix gs:// fetches in GCE without a service account
|
|
* docs/operator-notes: document supported S3 URL formats
|
|
* internal/resource: fix S3 access point object ARNs
|
|
* exec/util: fix infinite loop in Depth() if -root is relative
|
|
* Add ignition-delete-config.service and ignition-rmcfg symlink
|
|
* providers/virtualbox: support deleting Ignition configs
|
|
* providers/virtualbox: add comment referencing VirtualBox source
|
|
* providers/virtualbox: add define for GUEST_PROP_FN_GET_PROP
|
|
* providers/virtualbox: add helper to set up hypervisor connection
|
|
* providers/vmware: support deleting Ignition configs
|
|
* main: add ignition-rmcfg multicall binary
|
|
* go.mod: add github.com/beevik/etree
|
|
* providers/vmware: switch to internal copy of OVF parser
|
|
* internal/resource: fix bucket field in error message
|
|
* internal/resource: derive AWS region hint from ARN partition field
|
|
* internal/resource: simplify test
|
|
* internal/resource: fix minor nits
|
|
* provider/azure: try to fetch userdata from IMDS
|
|
* providers/vmware: convert OVF tests to testify
|
|
* providers/vmware: drop vmw-ovflib docs
|
|
* providers/vmware: add verbatim copy of vmw-ovflib
|
|
* providers/vmware: add constants for guestinfo and OVF property names
|
|
* providers/virtualbox: fix reading properties with flags
|
|
* internal/resource: support S3 access point URLs
|
|
- Update fixes CVE from [bsc#1199524]; this introduces a new
|
|
service "ignition-delete-config.service"
|
|
- Add ignition-rmcfg-suse.conf dropin to adapt to SUSE environment
|
|
- Use fixed paths in spec file for hardcoded installation paths
|
|
|
|
-------------------------------------------------------------------
|
|
Fri Apr 8 13:47:56 UTC 2022 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- Use /bin/sh instead of /usr/bin/sh (for backwards compatibility
|
|
with SLE Micro 5.1) [bsc#1196679]
|
|
|
|
-------------------------------------------------------------------
|
|
Tue Apr 5 14:57:20 UTC 2022 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- ignition-mount-initrd-fstab.service:
|
|
- Don't ignore errors in loops
|
|
- Unmount mount points recursively - a new submount may have
|
|
appeared
|
|
- Split umount part into own service file:
|
|
- ignition-umount-initrd-fstab.service:
|
|
- Unmounts the additional mounts as soon as they are not
|
|
required for Ignition any more; the ExecStop operation is
|
|
running quite late in initrd and may unmount essential mount
|
|
points flagged with "x-initrd.mount" (e.g. when storing /usr on
|
|
a separate mount point). In theory this will also affect
|
|
Ignition itself, but it hasn't been reported as a problem so
|
|
far.
|
|
|
|
-------------------------------------------------------------------
|
|
Mon Apr 4 17:23:10 UTC 2022 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- Don't include non-MarkDown files in documentation
|
|
|
|
-------------------------------------------------------------------
|
|
Fri Mar 25 09:59:53 UTC 2022 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- Add ignition-touch-selinux-autorelabel.conf:
|
|
Trigger SELinux autorelabel after Ignition runs; Ignition would
|
|
support SELinux itself, however this is a compile time option, so
|
|
it can't be used here.
|
|
- Filter commented lines in ignition-mount-initrd-fstab.service
|
|
|
|
-------------------------------------------------------------------
|
|
Fri Mar 4 10:46:21 UTC 2022 - Fabian Vogt <fvogt@suse.com>
|
|
|
|
- Remove /var/lib/YaST2/reconfig_system if a config was provided:
|
|
* ignition-remove-reconfig_system.service
|
|
|
|
-------------------------------------------------------------------
|
|
Fri Mar 4 10:23:10 UTC 2022 - Fabian Vogt <fvogt@suse.com>
|
|
|
|
- Add support for NetworkManager in dracut:
|
|
* ignition-enable-network.service, ignition-enable-network.sh
|
|
|
|
-------------------------------------------------------------------
|
|
Wed Dec 01 09:36:14 UTC 2021 - iforster@suse.com
|
|
|
|
- Update to version 2.13.0:
|
|
* news: add notes for 2.13.0
|
|
* config/v3_4_exp: noProxy entries cannot be null
|
|
* config/v3_4_exp: mark ignition.version as required
|
|
* docs/supported-platforms: add some description about Nutanix
|
|
* providers/nutanix: add Nutanix platform
|
|
* tests: use umountPath as a thin wrapper around umountPartition
|
|
* internal/providers: refactor handling of unmounting the mount path
|
|
* tests: address gostatic-check warning
|
|
* tests: Add base64 decoding test
|
|
* Dockerfile.validate: build with Fedora 35
|
|
* go.mod: update dataurl to 1.0.0
|
|
* ci: give blackbox tests two hours to run
|
|
* tests/filesystem: fix umountPartition retry loop
|
|
* templates: skip vendoring the new version in favor of dependabot
|
|
* go.mod: update vcontext
|
|
* providers/virtualbox: read config from /Ignition/Config guest property
|
|
* stages/filesystems: use mkfs.fat instead of mkfs.vfat
|
|
* docs/supported-platforms: switch to Afterburn docs URL
|
|
* docs/supported-platforms: drop reference to platform-specific agents
|
|
* test: ensure all platforms are documented
|
|
* docs/supported-platforms: add missing platforms
|
|
* stages/files: rename `relabelDirsForFile` and add docstring
|
|
* stages/files: make variable name follow Go convention
|
|
* docs/supported-platforms: update platform names and URLs
|
|
* docs/supported-platforms: sort by platform ID
|
|
* docs/supported-platforms: add platform IDs
|
|
* docs: Remove default layout from front matter
|
|
* docs: Do not convert -- & --- to en/em-dash
|
|
* internal/*: change the location of Ignition report
|
|
* internal/exec/util: rename FindFirstMissingDirForFile and tweak docs
|
|
* providers/qemu: start reporting progress reading fw_cfg after 10 s
|
|
* providers/qemu: optimize fw_cfg read size
|
|
* ci: use coreos-ci-lib helper for kola testiso
|
|
* *: gofmt 1.17
|
|
* workflows: bump Go and golangci-lint
|
|
* config: update versions in comments
|
|
- Removed obsolete ignition-rpmlintrc
|
|
|
|
-------------------------------------------------------------------
|
|
Mon Aug 23 14:22:10 UTC 2021 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- Make sure to create /boot/writable (may not be present in some
|
|
images)
|
|
|
|
-------------------------------------------------------------------
|
|
Thu Aug 12 17:42:59 UTC 2021 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- is-live-image doesn't exist on *SUSE, and our live images don't
|
|
use Ignition, so just add the Ignition device dependency to the
|
|
service file directly.
|
|
|
|
-------------------------------------------------------------------
|
|
Mon Aug 09 08:51:52 UTC 2021 - iforster@suse.com
|
|
|
|
- Update to version 2.12.0:
|
|
* news: add notes for 2.12.0
|
|
* stages/files: add previousReport to result report
|
|
* tests: fix linter warning
|
|
* workflows: limit permissions to reading repo contents
|
|
* workflows: bump linter version
|
|
* go.mod: revendor
|
|
* Drop EOL Go versions
|
|
* internal/distro: drop DiskByIDDir
|
|
* providers/azure: add support for azure gen2 VMs [bsc#1196679]
|
|
* stages/mount: correctly relabel the root of a fresh ext4 filesystem
|
|
* exec: fix permissions for mountpoints in home dirs
|
|
* tests: drop os.ModeDir requirement in mode of output directories
|
|
* examples: reboot with --force
|
|
* exec/util: add blkid API to query block devices based on FSTYPE
|
|
* stages/files: use IntToPtr() in createCrypttabEntries()
|
|
* stages/files: write result report to /var/lib/ignition
|
|
* engine: persist fetched config summaries in State
|
|
* stages/disks: use State to persist keyfiles for files stage
|
|
* *: add general mechanism for persisting state between stages
|
|
* main: drop -clear-cache flag
|
|
* engine: don't hardcode neednet path
|
|
* fetch-offline: return ErrNeedNet if we need net
|
|
* engine: switch Engine.logReport() to pointer receiver
|
|
* engine: fix incorrect error in log message
|
|
* dracut: drop ignition-setup-user.service
|
|
* dracut: drop reference to ignition-setup-base.service
|
|
* providers/gcp: access GCP metadata service by IP address
|
|
* Remove ignition-firstboot-complete.service
|
|
* OWNERS: remove
|
|
* internal/exec/util: drop device argument from cResultToErr()
|
|
* docs/config*: document storage.luks.clevis.threshold default
|
|
* ci: disable spec bump external test workaround
|
|
* docs: Add Ignition release / Spec version table
|
|
* templates: update example releng signing ticket
|
|
* templates: don't update %gotest lines
|
|
* Provide ignition-firstboot-complete.service (removed by upstream
|
|
due to correctly being considered distro spcific), based on the
|
|
old upstream version; removed all non-SUSE specific stuff and
|
|
integrated our own changes
|
|
* Removed change-ignition-firstboot-path.conf (changes are
|
|
integrated into ignition-firstboot-complete.service now).
|
|
* Provide ignition-setup-user.service (removed by upstream due
|
|
to correctly being considered distro spcific), based on the old
|
|
upstream version.
|
|
* Renamed ignition-setup-user-suse.sh to ignition-setup-user.sh
|
|
* Adapted ignition-generator-suse and module-setup.sh to use the
|
|
custom ignition-setup-user.service (no overriding of parts of the
|
|
service file necessary any more).
|
|
* Synced ignition-kargs-helper script with upstream example
|
|
* Raising minimum Go version to 1.15 as required by upstream
|
|
|
|
-------------------------------------------------------------------
|
|
Wed Jul 28 09:16:19 UTC 2021 - Thorsten Kukuk <kukuk@suse.com>
|
|
|
|
- Include vfat and nls kernel modules into initrd so that we can
|
|
read the ignition configuration from USB drives [bsc#1184202]
|
|
|
|
-------------------------------------------------------------------
|
|
Wed Jul 21 14:33:48 UTC 2021 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- Ignore error return code if no virtualization environment
|
|
detected. [bsc#1188479]
|
|
This makes it possible to use Ignition also on bare metal (e.g.
|
|
when dumping images directly to disk) without adding a
|
|
ignition.platform.id parameter.
|
|
|
|
-------------------------------------------------------------------
|
|
Thu Jul 8 10:47:50 UTC 2021 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- If a Combustion device was mounted, then unmount it in
|
|
ignition-kargs-helper - the replacement script will be put on
|
|
the same location
|
|
|
|
-------------------------------------------------------------------
|
|
Wed Jul 07 16:39:04 UTC 2021 - iforster@suse.com
|
|
|
|
- Update to version 2.11.0:
|
|
* news: add notes for 2.11.0
|
|
* Upgraded docs
|
|
* config/*: return report from previous parser when chaining
|
|
* config/*: re-order testcases by version
|
|
* tree: update for stable v3.3.0 and new v3.4.0-experimental
|
|
* config/v3_4_experimental: adapt for experimental
|
|
* config/v3_4_experimental: copy from config/v3_3
|
|
* config/v3_3: adapt for stabilization
|
|
* config/v3_3_experimental: rename to config/v3_3
|
|
* config/v3_3_exp: pointerify ClevisCustom Config and Pin
|
|
* config/v3_3_exp: pointerify Raid.Level
|
|
* config/v3_3_exp: pointerify LinkEmbedded1.Target
|
|
* stages/disks: simplify a check
|
|
* config/v3_1/translate: don't point to field from input struct
|
|
* config/v3_3_exp: drop devices from schema "required" field
|
|
* config/*: validate that storage.raid.devices is non-empty
|
|
* config/*/types: add RAID validation tests
|
|
* config/shared/errors: fix ErrSparesUnsupportedForLevel message
|
|
* config: fix comment
|
|
* *: formally bump Go to 1.13
|
|
* platform: add powervs platform
|
|
* internal/providers/*stack: drop dead timeout code
|
|
* stages/disks: improve error reporting for LUKS device reuse
|
|
* ignition-setup-user.service: drop Before=multipathd.service
|
|
* Dockerfile: build ignition-validate container using Fedora
|
|
* workflows: test on Go 1.16
|
|
* tests/*: verify deletion of block device w/o creating a FS
|
|
* *: allow erasing block device without creating a filesystem
|
|
* *: rename other projects' master branches to main
|
|
* *: rename master branch to main
|
|
* config/*: add export functions for parsing any config version < N
|
|
* config/*: refactor config.go's Parse() to use GetConfigVersion
|
|
* config/* : minor cleanup
|
|
- Refreshed to match new Ignition spec
|
|
* 0002-allow-multiple-mounts-of-same-device.patch
|
|
|
|
-------------------------------------------------------------------
|
|
Wed Jul 7 16:05:49 UTC 2021 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- Implement missing ignition-kargs-helper script for kernel
|
|
argument support
|
|
|
|
-------------------------------------------------------------------
|
|
Mon May 31 14:57:06 UTC 2021 - rpm@fthiessen.de
|
|
|
|
- Update to version 2.10.1:
|
|
* Breaking Changes:
|
|
* Rename Custom struct to ClevisCustom
|
|
* Embed Clevis and ClevisCustom structs in parents
|
|
* Always include interior nodes in merge transcript
|
|
* Add kernel argument support
|
|
* Fix fetching userdata on AWS when IMDSv1 is disabled
|
|
* Fix creating Tang-based LUKS volumes before network is up
|
|
* Document storage.filesystems.wipeFilesystem default
|
|
* Fix file mode of ignition-kargs-helper script
|
|
- Fix Go dependency, 1.13+ is required
|
|
|
|
-------------------------------------------------------------------
|
|
Wed Mar 31 16:03:16 UTC 2021 - hello@anthonyrabbito.com
|
|
|
|
- Update to version 2.9.0:
|
|
* news: add notes for 2.9.0
|
|
* internal/providers: Run platform Init function before fetching config
|
|
* internal/providers/aws: fix panic when an IMDSv2 token is present
|
|
* internal/resource/http: re-order initial backoff ramping
|
|
* internal/providers/util: drop dead code
|
|
* ci: move Travis jobs to GitHub actions
|
|
* *: fix errcheck warnings
|
|
* internal/log: drop the error return to appease golanci-lint
|
|
* internal/providers/packet: fix ineffassign warning
|
|
* internal/exec/stages/files: fix the EntrySort test
|
|
* internal: support IMDSv2 for AWS metadata service
|
|
* config/*: require filesystems.format with wipeFilesystem or mountOptions
|
|
* docs: make storage.filesystems.path field optional
|
|
* aws: Log if we fail to determine the EC2 region
|
|
* docs: move systemd.units.name uniqueness constraint to units
|
|
* *: fix gosimple warnings
|
|
* *: fix deadcode warnings
|
|
* *: fix staticcheck warnings
|
|
* config/*: fix nil deref on partitions with no number or label
|
|
* config: add specs newer than 3.0 to TestConfigStructure
|
|
* news: add notes for 2.8.1
|
|
* config/merge: support struct pointers
|
|
* test: drop stale comment
|
|
* tests: Remove unused checkOnStrings
|
|
* news: add notes for 2.8.0
|
|
* config: deprecate MergeStruct()
|
|
* config/merge: allow obtaining a transcript of merge operations
|
|
* config/merge: access field name as fieldMeta.Name
|
|
* config/merge: test primitive list items in slice case 1
|
|
* config/merge: fix typo
|
|
* config/merge: fix comments and add a couple more
|
|
* config/util: remove stray print when parsing invalid JSON
|
|
* vendor: update vcontext
|
|
* docs/development: update dep list for blackbox tests
|
|
* tests/positive: Add tests for masking and unmasking units
|
|
* units: add support for unmasking systemd units
|
|
* release-checklist: minor updates to the release instructions
|
|
* tests/positive/general: add test for merging multiple base configs
|
|
* tests/positive/general: update base config reference
|
|
* docs/development: update spec stabilization to avoid CI breakage
|
|
* release-checklist: drop download_ignition.sh
|
|
* providers/system: support .d directory for base config fragments
|
|
* docs/migrating-configs: spell out Google Cloud Storage
|
|
* release-checklist: update packaging section
|
|
|
|
-------------------------------------------------------------------
|
|
Tue Nov 3 14:40:58 UTC 2020 - Franck Bui <fbui@suse.com>
|
|
|
|
- Replace '%service_del_postun -n' with '%service_del_postun_without_restart'
|
|
|
|
'-n' is deprecated and will be removed in the future.
|
|
|
|
-------------------------------------------------------------------
|
|
Mon Oct 19 15:39:37 UTC 2020 - iforster@suse.de
|
|
|
|
- Update to version 2.7.0:
|
|
* news: add notes for 2.7.0
|
|
* docs: stabilize spec
|
|
* gomod: bump go.opencensus.io to v0.22.5
|
|
* docs: add section to spec stabilization for failing external tests
|
|
* news: fix error in 2.3.0 changelog
|
|
* tests: update for spec stabilization
|
|
* internal: update for new experimental spec
|
|
* config/v3_3_experimental: create new experimental package
|
|
* config/v3_2_experimental: mark stable
|
|
* interal/providers/*stack: drop timeout for config fetch
|
|
* internal/providers/*stack: exit early if all configs error out
|
|
* internal/providers/*stack: make ErrNotFound authoritative
|
|
* doc: add clevis custom documentation
|
|
* internal/exec/stages: add clevis custom support
|
|
* config: add custom options for clevis devices
|
|
* fetch-offline: immediately return ErrNeedNet on OpenStack
|
|
* ci: unfreeze kernel
|
|
* tests/*: add test for resizing an existing partition
|
|
* docs/*: add resize partition info
|
|
* stages/disks: support resizing an existing partition
|
|
* config: add resize to schema
|
|
* README: Minor changes for consistency
|
|
* test: Use alternative marker for testing ignition config examples
|
|
* docs: Convert and improve formatting for INI sections
|
|
* docs: Add spec ordering instructions for new stable releases
|
|
* docs: Add ToC for some long pages
|
|
* docs: Rename Migrating ... to Upgrading Configs
|
|
* docs: Fix link in Development page
|
|
* docs: Add specs reference page
|
|
* docs: Add index page inspired from README
|
|
* docs: Add Config Validation example from README
|
|
* docs: Add Jekyll front matter for existing pages
|
|
* docs: Add Jekyll and theme config
|
|
* internal: fix S3 region detection
|
|
* docs: Follow-up for doc->docs renaming
|
|
* docs: Rename doc to docs for GitHub Pages support
|
|
* docs/getting-started: tiny cleanups
|
|
* README: drop stray link target
|
|
* doc: drop references to Container Linux
|
|
* doc/development: drop section on running blackbox tests on CL
|
|
* doc: add gs url scheme for bare metal platform
|
|
* fetch: don't run if fetch-offline fetched a config
|
|
* doc: fix LUKS indentation for configuration-v3_2_experimental docs
|
|
* doc: Add shouldExist for users and groups
|
|
* engine: fix logging interactions with fetch-offline
|
|
* AzureStack: fix unfortunate typo of iso9660
|
|
* *: add wipeVolume LUKS field
|
|
* types: Use "path" instead of "path/filepath"
|
|
* Add support for building 32 bit ARM version
|
|
* Install Dracut modules with correct permissions
|
|
* Add support for building 32 bit x86 version
|
|
* doc: add LUKS examples & operator notes
|
|
* internal/stages/disks: allow LUKS device re-use
|
|
* internal: use device aliases for LUKS
|
|
* tests: fix partition.number0 partition size specification
|
|
* blkid: drop some unsafe pointer casts
|
|
* blkid: fix invalid pointer cast in DumpDisk()
|
|
* {sgdisk,blkid}: use int64 for sector counts
|
|
* sgdisk: stop putting sector counts in MiB fields
|
|
* README: note that spec2x is unmaintained
|
|
* release-checklist: drop support for Ignition 0.x
|
|
* release-checklist: minor updates
|
|
- Remove upstreamed patches
|
|
* 0001-fix-install-permissions.patch
|
|
* 0003-fix-i386-build.patch
|
|
* ignition-fix-arm32-installation.patch
|
|
- Refreshed to match new Ignition spec
|
|
* 0002-allow-multiple-mounts-of-same-device.patch
|
|
|
|
-------------------------------------------------------------------
|
|
Fri Sep 18 06:33:02 UTC 2020 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- Retrigger udev when requesting networking on demand
|
|
|
|
-------------------------------------------------------------------
|
|
Fri Sep 4 12:07:21 UTC 2020 - Fabian Vogt <fvogt@suse.com>
|
|
|
|
- 02_ignition_firstboot, ignition-enable-network.sh: Drop ip=dhcp,
|
|
it's the default anyway and avoids a delay on boot (boo#1173402)
|
|
- 02_ignition_firstboot: Drop rd.neednet=1, both ignition and
|
|
combustion enable it themselves when necessary
|
|
|
|
-------------------------------------------------------------------
|
|
Thu Sep 3 15:04:30 UTC 2020 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- Change virtualization detection from virt-what to
|
|
systemd-detect-virt; this avoids a dependency to a hardcoded
|
|
libexec path in module-setup.sh (which broke during the recent
|
|
migration to /usr/libexec)
|
|
|
|
-------------------------------------------------------------------
|
|
Tue Aug 18 11:56:54 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
|
|
|
|
- Add patch to fix install on %arm:
|
|
* ignition-fix-arm32-installation.patch
|
|
|
|
-------------------------------------------------------------------
|
|
Wed Aug 12 09:27:01 UTC 2020 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- Fixed "ignition presets not applied" (boo#1172510)
|
|
- Refresh 0001-fix-install-permissions.patch to match pull request
|
|
|
|
-------------------------------------------------------------------
|
|
Sun Aug 09 22:06:51 UTC 2020 - kukuk@suse.de
|
|
|
|
- Update to version 2.6.0:
|
|
* news: add notes for 2.6.0
|
|
* travis: test container build
|
|
* README: always run latest release of ignition-validate container
|
|
* release-checklist: update Quay release tag
|
|
* build_releases: specialize for container build
|
|
* Revert "build_releases: drop script"
|
|
* ci: use faster compression for buildextend-live
|
|
* cloudstack|openstack: propagate ErrNeedNet
|
|
* internal/config: allow Ignition generated key-files for all devices
|
|
* dracut/30ignition: Add packages to delete users/groups
|
|
* tests/positive: Add test for deleting users
|
|
* tests/stubs: Add blackbox testing stub for userdel and groupdel
|
|
* config: add ShouldExist to schema
|
|
* passwd: allow removing the existing users/groups
|
|
* Revert "ci: skip rootfs.uuid test while ratcheting ignition-dracut merge"
|
|
* ci: drop cosa compress call
|
|
- Add 0001-fix-install-permissions.patch: Fix permissions of installed files
|
|
- Add 0003-fix-i386-build.patch: Fix build on 32 Bit x86 machines
|
|
|
|
-------------------------------------------------------------------
|
|
Tue Jul 28 11:16:55 UTC 2020 - kukuk@suse.de
|
|
|
|
- Update to version 2.5.0:
|
|
Merge of ignition-dracut into ignition; CoreOS specific files have been
|
|
removed (they can be found as part of
|
|
https://github.com/coreos/fedora-coreos-config now for reference)
|
|
* news: add notes for 2.5.0
|
|
* ci: skip rootfs.uuid test while ratcheting ignition-dracut merge
|
|
* stages/disks: get filesystem info via device alias
|
|
* dracut: remove CoreOS specific modules
|
|
* Clean-up post-merge files.
|
|
* ci: build metal4k image before live image
|
|
* 30ignition: move conditional network startup out of ignition-dracut
|
|
* tests/kola: move blackbox tests to its own dir
|
|
* build_releases: drop script
|
|
* templates: update checklist for current process
|
|
* dracut/30ignition: fix typo in udev rule
|
|
* dracut/30ignition: add Ignition LUKS
|
|
* make: install systemd unit as non-executable
|
|
* 30ignition: make var in dracut_func local
|
|
* Add new ignition-fetch-offline.service
|
|
* ci: test with git master of coreos/ignition
|
|
* 30ignition: GPT setup: wait for 'boot' labeled partition
|
|
* 30ignition: add wipefs to the initramfs
|
|
* Remove OnFailure= from targets, put in services
|
|
* ignition-setup-user.service: run before multipathd
|
|
* 30ignition: clean up Ignition stages ordering
|
|
* coreos-teardown-initramfs: propagate the automatic multipath conf
|
|
* 99emergency-timeout: Dump all failed services
|
|
* 30ignition: drop hard requirement on qemu_fw_cfg
|
|
* 99emergency-timeout: improve readability of Ignition failure message
|
|
* 99emergency-timeout: also check ignition-fetch.service for failure
|
|
* coreos-teardown-initramfs-network: don't run when emergency.target
|
|
* dracut: add logging to systemd generator
|
|
* coreos-teardown-initramfs-network: also propagate hostname
|
|
* coreos-teardown-initramfs-network: support coreos.no_persist_ip karg
|
|
* coreos-teardown-initramfs-network: consider ifcfg files in real root for RHCOS
|
|
* coreos-teardown-initramfs-network: also skip local loopback interface
|
|
* coreos-teardown-initramfs-network: do SELinux relabel on copied files
|
|
* coreos-teardown-initramfs-network: order ExecStop after other ignition units
|
|
* coreos-teardown-initramfs-network: remove After=ignition-files.service
|
|
* Add ignition-virtio-dump-journal.service
|
|
* Add `basename` dependency to dracut module
|
|
* coreos-teardown-initramfs-network: enable the service statically
|
|
* coreos-teardown-initramfs-network: simplify networking takedown
|
|
* coreos-teardown-initramfs-network: take down routes too
|
|
* coreos-teardown-initramfs-network: take down teams as well
|
|
* coreos-teardown-initramfs-network: remove state files on switch
|
|
* coreos-teardown-initramfs-network: also propagate initramfs networking if desired
|
|
* coreos-teardown-initramfs-network: refactor into more functions
|
|
* add coreos-teardown-initramfs-network.service
|
|
* Declare external applications as optional
|
|
* Remove obsolete dependencies
|
|
* Hook up to CoreOS CI
|
|
* Add ignition-diskful-subsequent.target
|
|
* Makefile: Remove grub/ install bits
|
|
* Make setfiles optional
|
|
* dracut: add some bins for s390x zVM instalation
|
|
* README.md: add details about the branches here
|
|
* units: add ConditionPathExists=/etc/initrd-release everywhere
|
|
* Add ConditionPathExists=/etc/initrd-release to targets
|
|
* 30ignition: add setfiles
|
|
* 30ignition/ignition-setup-user: mount /boot partition ro
|
|
* firstboot-complete: tell zipl to run
|
|
* coreos-gpt-setup: workaround old lsblk not having PTUUID
|
|
* Add `ignition-subsequent.target` for non-Ignition boots
|
|
* ignition-firstboot-complete.service: Run as part of basic.target
|
|
* Run ignition-disks earlier to avoid race condition
|
|
* 30ignition: update ignition-complete.target OnFailure comment
|
|
* dracut: Add an ignition-fetch.service
|
|
* 30ignition: drop OnFailure handler from ignition-diskful.target
|
|
* 30ignition: fix sequencing of target dependencies
|
|
* Add RemainAfterExit=yes to systemd units of Type=oneshot
|
|
* Makefile: New file implementing `make install`
|
|
* 30ignition: move coreos-gpt-setup RemainAfterExit to correct section
|
|
* 30ignition: on live images, read config.ign from custom initrd
|
|
* 30ignition: make ignition-diskful a dependency of ignition-complete
|
|
* 30ignition: fix double slash in ignition-setup-* dest paths
|
|
* systemd: don't try to mark live boots complete
|
|
* 30ignition: conditionally enable units requiring a boot disk
|
|
* README.md: fix download link
|
|
* update-bootengine: drop file
|
|
* dracut/30ignition: localize some variables
|
|
* ignition: fix correct device path when randomizing UUID
|
|
* dracut/30ignition: fix typo in module_setup
|
|
* ignition: split ignition-setup into base and user
|
|
* dracut/30ignition: scramble disk uuid on 1st boot
|
|
* grub: drop 02_ignition_firstboot
|
|
* dracut: add 99emergency-timeout
|
|
* 30ignition: drop CoreOS specific bits
|
|
* dracut/30ignition: link to RHBZ in ignition-complete
|
|
* dracut/30ignition: add OnFailure= for ExecStop= services
|
|
* dracut/30ignition: order ExecStop= units before initrd-switch-root.target
|
|
* dracut/30ignition: re-order directives in remount-sysroot
|
|
* dracut/30ignition: add missing Before= for mount unit
|
|
* dracut/30ignition: order ignition-complete.target before initrd.target
|
|
* module_setup: include cdrom rules for openstack
|
|
* dracut: add CoreOS integration services
|
|
* dracut/30ignition: Add mount stage and drop OSTree-specific bits
|
|
* dracut/30ignition: Explicitly add OnFailure=emergency.target
|
|
* 30ignition: ignore coreos.randomize_disk_guid
|
|
* 30ignition: drop check for coreos.oem.id
|
|
* grub: support overriding network kcmdline args
|
|
* README.md: update documentation
|
|
* 02_ignition_firstboot: Enable networking if Ignition will run
|
|
* dracut/30ignition: expect ignition binary in module directory
|
|
* dracut/30ignition: add ignition-complete.target
|
|
* dracut/30ignition: split out ignition-setup.service
|
|
* dracut/30ignition: Only write ignition-setup.service on first boot
|
|
* grub: find boot partition and use it directly
|
|
* module-setup.sh: Check for module qemu_fw_cfg not build-in, so it works out of box on all arches
|
|
* dracut/30ignition: general hack cleanups
|
|
* dracut: adapt for s/oem/platform in Ignition
|
|
* ignition-setup: don't perform umount, rely on systemd
|
|
* ignition-setup: rename copy function
|
|
* services: fixup unit deps to more match CL
|
|
* ignition-setup: use MountFlags=slave for systemd unit
|
|
* ignition-setup: changes from code review
|
|
* ignition-setup: mount/unmount boot to grab user.ign
|
|
* dracut: add /usr/sbin/ignition-setup to initramfs
|
|
* generator: try to get ignition-setup to run on boot
|
|
* generator: RemainAfterExit=yes for ignition-setup
|
|
* ignition-setup: support boot or platform base/user configs
|
|
* ignition-setup: remove support for default configs
|
|
* Remove the check for OEM partition, not used
|
|
* Always check for boot, needs to exist
|
|
* Replace OEM with boot
|
|
* Add ability to parse config.ign file on boot
|
|
* journal: add clarifying comment for context
|
|
* Remount /sysroot rw (#38)
|
|
* ignition-firstboot-complete.service: Remount /boot rw
|
|
* Rename `coreos.firstboot` kernel cmdline arg to `ignition.firstboot` to make options more distribution neutral. Update dracut/README.txt to take into account recent changes.
|
|
* 30ignition: only instmods if module available
|
|
* remove ignition-remount-sysroot.service files
|
|
* ignition: run files stage at original CL ordering
|
|
* ignition-disks.service: drop Requires=network.target
|
|
* ignition-ask-var-mount.service: use RemainAfterExit=yes
|
|
* module-setup.sh: explicitly install qemu_fw_cfg
|
|
* module-setup: Make mkfs.btrfs optional
|
|
* 30ignition: add support for ignition-disks
|
|
* journal: Don't log to console AND kmsg
|
|
* dracut/ignition: remove CL-legacy udev references
|
|
* coreos-firstboot-complete: RemainAfterExit=yes
|
|
* change the default level of messages send to kmsg
|
|
* Add Journald forward to kernel log buffer option
|
|
* fixup! Rework how we run Ignition on first boot
|
|
* Rework how we run Ignition on first boot
|
|
* Drop 'auto-detect' hacks in generator
|
|
* Make ignition work on classic systems
|
|
* ignition-generator: add hack for openstack support
|
|
* Add ignition-ask-var-mount.service
|
|
* no disks for now - boot systemd unit ordering issue
|
|
* Run ignition-files after ostree-prepare-root.service
|
|
* Prefix remount-sysroot.service with "ignition-"
|
|
* README.txt: fix rpm-ostree instruction
|
|
* update README
|
|
* add back in forwarding journal to console
|
|
* get rid of usr-generator module
|
|
* For now let's assume ec2 if we are running on xen
|
|
* module-setup: update module-setup so deps are pulled in
|
|
* module-setup: order install list alphabetically
|
|
* README: Note instructions are for classic systems
|
|
* ignition-quench.clc: add the source for ignition-quench.ign
|
|
* add ignition disks stage
|
|
* only run Ignition on first boot
|
|
* module-setup.sh should install the binaries Ignition depends on
|
|
* reset to 863a8f6
|
|
* Try to fix problem
|
|
* Revert "use /etc/machine-id to detect firstboot"
|
|
* use /etc/machine-id to detect firstboot
|
|
* Make it so we will only run once
|
|
* Add README that shows people how to use this
|
|
* Hack dracut to just do ignition-files.
|
|
* remove extra sauce
|
|
* dracut: drop obsolete comment
|
|
* 99start-root: drop DEVLINKS from mdadm invocation
|
|
* update CoC and legalese
|
|
* dracut: ignore Azure SR-IOV VF interface
|
|
* dracut: correctly sequence disk-uuid@ before ignition-setup
|
|
* dracut: copy Ignition base configs into system dir
|
|
* dracut: fix comment
|
|
* dracut: consolidate Oracle OCI network units
|
|
* dracut: add module to start iSCSI root disk
|
|
* dracut: add network units for Oracle OCI
|
|
* dracut: move IP/link teardown from a drop-in to a separate unit
|
|
* dracut: switch to using gpt partition types
|
|
* dracut: add module to assemble root raid array
|
|
* update-bootengine: enable terminfo module
|
|
* dracut: fail verity-setup.service if verity setup fails
|
|
* dracut: update some comments in usr-generator
|
|
* dracut: disable systemd-fsck@.service for /usr
|
|
* dracut: prevent dev-mapper-usr.device from timing out
|
|
* dracut: Move chmod into coreos-overlay with the others
|
|
* dracut: Run coreos-static-network before ignition-files
|
|
* dracut: add mkswap for ignition-disks
|
|
* update-bootengine: take out multipath again with 045
|
|
* dracut: Have ignition depend on the upstream qemu module
|
|
* dracut: use coreos-metadata to configure Packet networking on first boot
|
|
* dracut: on ec2, disable systemd-networkd if ignition fails
|
|
* update-bootengine: Drop amd64-generic from usage text
|
|
* dracut: Drop support for diskless amd64-generic
|
|
* dracut: disable networkd by default
|
|
* dracut: conditionally enable coreos-digitalocean-network.service
|
|
* dracut/30ignition: add mkfs.vfat
|
|
* Revert "add sysusers to the initramfs"
|
|
* add sysusers to the initramfs
|
|
* dracut: Don't prompt twice upon reaching a dracut breakpoint
|
|
* dracut: Don't instantly reboot upon reaching a dracut breakpoint
|
|
* dracut: Unmount /sysroot/boot more carefully
|
|
* dracut: teach ignition-generator about kvm
|
|
* dracut: Delete /boot/coreos/first_boot after automatic Ignition run
|
|
* dracut: Add comment
|
|
* Revert "dracut: Use ConditionKernelCommandLine in Ignition units"
|
|
* Revert "dracut: Run ignition-files whenever /etc/machine-id doesn't exist"
|
|
* Revert "dracut: Randomize disk GUID only after ignition-disks succeeds"
|
|
* dracut: Confirm entering emergency shell, reboot otherwise
|
|
* dracut: Randomize disk GUID only after ignition-disks succeeds
|
|
* dracut: Run ignition-files whenever /etc/machine-id doesn't exist
|
|
* dracut: Use ConditionKernelCommandLine in Ignition units
|
|
* dracut: Eliminate ignition.target
|
|
* dracut: Migrate Ignition unit files from coreos-overlay
|
|
* diskless-generator: Fix root directory mode 1777 on tmpfs
|
|
* dracut: add qemu detection to ignition generator
|
|
* dracut: support initramfs network configuration via cmdline
|
|
* verity-generator: use BindsTo for device dependencies
|
|
* verity-generator: fix race with disk modification jobs
|
|
* dracut: enable coreos-digitalocean-network.service
|
|
* dracut: add digitalocean network config
|
|
* dracut: include cdrom_id rules
|
|
* dracut: install qemu_fw_cfg lkm in ignition module
|
|
* dracut: build onto the upstream systemd-networkd module
|
|
* dracut: change pxe network config condition
|
|
* dracut: set ClientIdentifier=mac for the PXE OEM
|
|
* update-bootengine: add -k to usage message
|
|
* dracut: install kernel network modules
|
|
* update-bootengine: add support for bundling kernel modules
|
|
* dracut: include ca-certs bundle
|
|
* setup-root: fix ordering with /sysroot/usr mount
|
|
* dracut: enable DHCPv6
|
|
* dracut: make gpt headers valid before randomizing
|
|
* dracut: add forward-to-console option to journald
|
|
* dracut: run tmpfilesd with etc-shadow config
|
|
* dracut: explicitly order disk-uuid before systemd-fsck-root
|
|
* dracut: read guid to randomize in disk-uuid from kernel paramater
|
|
* dracut: require disk-uuid.service on coreos.randomize_disk_guid=1
|
|
* dracut: use ignition-generator to require disk-uuid.service
|
|
* dracut: parse coreos.oem.id for ignition
|
|
* setup-root: fix ordering between selinux-base.conf and libsemanage.conf
|
|
* dracut: add mkfs.xfs to ignition
|
|
* initrd-setup-root: check selinux tmpfiles configs before using them
|
|
* update-bootengine: use the native ldconfig
|
|
* dracut: apply etc.conf in initrd-setup-root
|
|
* dracut: remove link-local addr from network config
|
|
* dracut: remove junk from zz-default.network
|
|
* dracut: remove Ignition udev trigger
|
|
* dracut: use inst_simple instead of inst
|
|
* dracut: swap ignition.force for coreos.first_boot
|
|
* dracut: add mkfs dependencies for Ignition
|
|
* dracut: use idiomatic method for installing rules
|
|
* bootengine: apply baselayout-home.conf in initrd-setup-root
|
|
* bootengine: fully populate the initrd shadow db from baselayout
|
|
* bootengine: initialize /sysroot/etc shadowdb files from baselayout
|
|
* bootengine: convert initrd-setup-root to a standalone shell script
|
|
* bootengine: convert setup-root to a standalone systemd service
|
|
* bootengine: rename 80setup-root to 99setup-root
|
|
* Set up selinux tmpfiles before performing root pivot
|
|
* dracut: set DefaultDependencies=no for initrd-systemd-resolved
|
|
* dracut: add ignition systemd generator
|
|
* dracut: add useradd, usermod, groupadd to ignition module.
|
|
* dracut: udevadm settle after writing the disk GUID
|
|
* dracut: take down all interfaces before switchroot
|
|
* dracut: discard 99-default.link from 02systemd-networkd module
|
|
* dracut: add ordering on disk-uuid.service
|
|
* dracut: add Ignition
|
|
* dracut: add systemd-networkd to the initramfs.
|
|
* dracut: remove disk-uuid's dependence on Ignition
|
|
* dracut: fix typo in disk-uuid.service
|
|
* disk-uuid: add service for generating GPT UUID
|
|
* verity-generator: disable default dependencies
|
|
* verity-generator: add service generator for veritysetup
|
|
* diskless-generator: make a real mount unit when using btrfs as rootfstype
|
|
* dracut: don't explicitly remount /sysroot rw
|
|
* setup-root: remove call to ldconfig
|
|
* gptprio: remove kexec based implementation
|
|
* diskless-generator: check value of mount.usr= and usr=
|
|
* systemd: don't initialize machine-id, do initialize ld.so.conf
|
|
* Explicitly supply the ACPI RSDP address to kexec on efi systems
|
|
* update-bootengine: always run ldconfig in chroots before dracut
|
|
* gptprio: retry mount if it fails the first time
|
|
* systemd: add module to disable network device renaming
|
|
* fix(update-bootengine): Exclude unnecessary dracut modules.
|
|
* add(diskless-btrfs): Experiment for diskless btrfs instead of tmpfs
|
|
* add(remount-sysroot.service): If needed remount root as rw
|
|
* fix(99dracut-root): Replace 99fstab with an even more stupid hack.
|
|
* add(10diskless-generator): Add generator for squashfs and tmpfs mounts.
|
|
* fix(10usr-generator): Typo fixes
|
|
* add(10usr-generator): Move usr=/dev/foo handling to a systemd generator
|
|
* fix(80setup-root): Add missing -E flag to grep.
|
|
* remove(80squashfs): Replaced by using fstab instead.
|
|
* add(99fstab): New module to satisfy dracut without root=
|
|
* fix(80setup-root): Handle initrd OEMs
|
|
* fix(80setup-root): Silence "machine-id: No such file" error message
|
|
* cleanup(80setup-root): Remove ${BOOTENGINE_ROOT_DIR} var
|
|
* remove(80usrgptprio): Replaced by new gptprio and setup-root modules
|
|
* add(80setup-root): Move fs setup logic to new module
|
|
* fix(80gptprio): Gut most of gptprio, make it work for root and usr
|
|
* feat(80usrgptprio) add ability for unique /etc/machine-id files
|
|
* remove(80resize): Drop resize module
|
|
* fix(80resize): Don't resize until after kexec
|
|
* fix(80usrgptprio): Add special x-initrd.mount option to /sysroot/usr
|
|
* add(resize): New dracut module to resize ROOT before mounting.
|
|
* fix(update-bootengine): Include fsck in bootengine.
|
|
* fix(80squashfs): Split hook into separate parse and mount hooks.
|
|
* fix(80usrgptprio): Add basic support for plain block devices
|
|
* fix(80usrgptprio): Update usr= option, not root=
|
|
* fix(80usrgptprio): Support kernels in both /usr/boot and /boot
|
|
* fix(80usrgptprio): Fix normal test case. Enable 80usrgptprio testing.
|
|
* fix(80usrgptprio): Fix mount-fail test case.
|
|
* fix(80usrgptprio): Fix kexec-fail test case.
|
|
* fix(80usrgptprio): Fix fail-kernel test case.
|
|
* fix(80usrgptprio): Fix backup/setup of symlinks root filesystem.
|
|
* fix(80usrgptprio): Fix fail-everything test case.
|
|
* fix(80usrgptprio): Do not run without usr=gptprio
|
|
* fix(80usrgptprio): Convert test case to same spacing as module code.
|
|
* feat(80usrgptprio): initial commit
|
|
* fix(gptprio): Fix fallback path when using systemd.
|
|
* fix(parse-gptprio.sh): Fix up log message.
|
|
* add(journald): New module for journald configuration
|
|
* fix(gptprio): Add best-effort support for unloading modules before kexec
|
|
* fix(gptprio): Switch to falling back on kernel/kexec failures.
|
|
* fix(tests): Rework the test suite, make false positives harder.
|
|
* cleanup(gptprio): Move our verbose command logging into a common function
|
|
* fix(gptprio): Drop case translation, cgpt next now uses lower case
|
|
* fix(update-bootengine): Silence setlocale errors
|
|
* fix(update-bootengine): Fix terrible typo that broke namespace creation.
|
|
* feat(dracut/80squashfs): make oem of unlimited size
|
|
* feat(parse-squashfs): add in support for custom OEMs
|
|
* feat(squashfs): initial commit of squashfs root support
|
|
* fix(update-bootengine): Compare namespaces via mountinfo.
|
|
* License project under BSD-2 license
|
|
* fix(module-setup): Use dracut_install which aborts on errors.
|
|
* Add(update-bootengine): Move code for running dracut out of ebuild.
|
|
* fix(dracut): use lower on PARTUUID
|
|
* fix(dracut): umount the root fs
|
|
* feat(tests): refactor and add tests
|
|
* feat(dracut): add debuggging output
|
|
* feat(pre-mount-gptprio): die if the kexec returns
|
|
* fix(dracut) mount boot filesystem as ro so it's not dirty when it boots
|
|
* feat(dracut) add proper support for cgpt
|
|
* feat(dracut): get everything working
|
|
* Initial commit
|
|
- Dropped 0003-Disable-resetting-UUID.patch (upstream moved the
|
|
functionality into the CoreOS configuration.
|
|
- Added ignition-enable-network.sh /
|
|
ignition-enable-network.service:
|
|
Implemented ignition-fetch-offline feature to only start
|
|
networking if required
|
|
|
|
-------------------------------------------------------------------
|
|
Mon Jul 20 06:53:08 UTC 2020 - iforster@suse.de
|
|
|
|
- Update to version 2.4.1:
|
|
* news: add notes for 2.4.1
|
|
* ci: also run testiso
|
|
* engine: fix provider config precedence
|
|
* news: fix typo
|
|
* files: don't relabel homedir symlinks themselves
|
|
* stages/files: set LUKS keyfile directory to 0700
|
|
* util/user_group_lookup: handle more error codes
|
|
- Update to version 2.4.0:
|
|
* news: add notes for 2.4.0
|
|
* doc: add Azure Stack to platform list
|
|
* doc: drop production-users
|
|
* doc: update link for systemd drop-ins
|
|
* doc: update supported platform links
|
|
* fetch-offline: signal networking for Tang-pinned LUKS devices
|
|
* doc: add LUKS fields to configuration document
|
|
* internal: add LUKS support
|
|
* config: add LUKS to schema
|
|
* units: empty dropins should be written to disk
|
|
* internal/resource/http: clear CA compression on rewrite
|
|
* internal/exec/engine: write empty cache config when not provided
|
|
* AzureStack: add new target platform
|
|
* CONTRIBUTING: drop mailing list and IRC references
|
|
* MAINTAINERS: drop file
|
|
* Azure: allow for either udf or iso9660 config volume
|
|
* files: don't run `setfiles` with `-i`
|
|
* files: relabel the systemd preset directory
|
|
* exec/util: factor function for resolving symlinks
|
|
* passwd: don't auto-prefix user homedir
|
|
* internal/util/url: don't require networking for empty schemes
|
|
* docs: Add gs scheme
|
|
* config/types: Add validation for gcs urls
|
|
* internal/resource: Support gcs urls in Ignition config
|
|
* vendor: Add GCS module and its dependencies
|
|
* ci: change --blacklist-test to --denylist-test
|
|
* ci: also run gofmt and unit tests
|
|
* fetch-offline: new stage for conditional networking
|
|
* ci: move comment about kernel closer to `curl`
|
|
* tests: add test for creating a deeper hard link to the file
|
|
* stages/files: fix hard links to files that are deeper than the hard link
|
|
* doc/configuration-*: clarify references to `source`
|
|
* stages/disks: run wipefs before creating filesystem
|
|
* stages/disks: warn if libblkid finds multiple filesystem signatures
|
|
* exec/util: merge filesystem lookup functions
|
|
* tests: add positive test for reusing ambivalent filesystem
|
|
* tests: specify type when mounting filesystem
|
|
* tests: add canned ZFS image
|
|
* tests: only mount partitions if we need to
|
|
* ci: test with latest ignition-dracut
|
|
* providers/aws: change metadata version from 2009-04-04 to 2019-10-01
|
|
* Add CA bundle reference in the docs
|
|
* Moving tls public/private keys into a separate package
|
|
* Update AWS for IMDSv2
|
|
* Add cabundle tests
|
|
* config/*: drop warning on unset file/dir mode
|
|
* Add support for CA bundles for fetching the ignition config Fixes https://github.com/coreos/ignition/issues/931
|
|
* ci: Freeze kernel at 5.6.7 due to loop regression breaking blackbox test
|
|
|
|
-------------------------------------------------------------------
|
|
Mon May 11 07:09:28 UTC 2020 - kukuk@suse.de
|
|
|
|
- Update to version 2.3.0:
|
|
* news: add notes for 2.3.0
|
|
* config/v3_2_experimental: update all copyright dates
|
|
* doc/configuration-*: update for new spec
|
|
* tests: stabilize spec 3.1.0
|
|
* *: update for new experimental spec
|
|
* config/v3_2_experimental: set up package
|
|
* config/v3_2_experimental: copy from config/v3_1
|
|
* config/v3_1_experimental: mark stable
|
|
* doc/development: update spec stabilization instructions
|
|
* config: rename function for clarity
|
|
* tests: bump invalid 2.x experimental version to match spec2x branch
|
|
* config/v3_1_experimental: add some missing version tests
|
|
* config/v3_1/translate: fix package name
|
|
* doc/migrating-configs: update for 3.1.0
|
|
* resource/url: allow compression in data URLs
|
|
* doc/migrating-configs: mention spec 2.4.0
|
|
* validate: accept any supported config version
|
|
* exec: drop validate.go
|
|
* doc/migrating-configs: put newest version first
|
|
* Add SHA-256 reference in the docs
|
|
* Add SHA-256 support for file verification
|
|
* ci: run blackbox tests in CoreOS CI
|
|
* Send ssh_authorized keys info into the journald log
|
|
* Update go-systemd with the systemd module
|
|
* Send a message to the systemd journal if a user config is provided
|
|
* tests: add positive tests for resource compression
|
|
* spec: unify resource fetching type
|
|
* doc: clarify wording of files.*.verification.hash
|
|
* vendor: refresh after gomod changes
|
|
* gomod: update to go-systemd v22
|
|
* stages: fix package names
|
|
* providers/packet: override Accept header fetching instance metadata
|
|
* resource/url: allow caller-specified headers to override defaults
|
|
* Allow to specify HTTP headers for fetching configs and files
|
|
|
|
-------------------------------------------------------------------
|
|
Wed Mar 25 10:11:53 UTC 2020 - kukuk@suse.de
|
|
|
|
- Update to version 2.2.1:
|
|
* news: add notes for 2.2.1
|
|
* providers/qemu: fix default to fwcfg
|
|
* doc/development: remember to bump Accept header during spec bumps
|
|
- Remove 0001-Support-more-architectures.patch:
|
|
Patch added upstream
|
|
|
|
-------------------------------------------------------------------
|
|
Tue Mar 24 12:58:48 UTC 2020 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- Add 0001-Support-more-architectures.patch:
|
|
Allow builing on i586 (and other architectures) again
|
|
|
|
-------------------------------------------------------------------
|
|
Tue Mar 24 07:45:25 UTC 2020 - kukuk@suse.de
|
|
|
|
- Update to version 2.2.0:
|
|
* news: add notes for 2.2.0
|
|
* Fix ignition config for the instantiated unit test
|
|
* Fix enabling systemd instantiated services
|
|
* providers/qemu: support Ignition block device on s390x and ppc64le
|
|
* blkid: Explicitly use C int variable for numParts
|
|
* tests: don't panic after failing to run Ignition
|
|
* platform: sort providers
|
|
* ci: migrate to new coreos-ci project
|
|
* OWNERS: add OWNERS file
|
|
* Add Exoscale provider
|
|
* docs: minor fixes to platforms page
|
|
* ci: hook up to CoreOS CI
|
|
* providers/vultr: Add Vultr provider
|
|
* Throw error if SSH keys could not be written
|
|
* stages/files: don't relabel /home and /root symlinks
|
|
- Drop 0001-Throw-error-if-SSH-keys-could-not-be-written.patch
|
|
- Added explicit Recommends for helper applications
|
|
[boo#1167289]
|
|
|
|
-------------------------------------------------------------------
|
|
Tue Jan 21 16:25:25 UTC 2020 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- Do not use SSH keys fragments, those are not supported by
|
|
openSUSE. [boo#1161265]
|
|
|
|
-------------------------------------------------------------------
|
|
Tue Jan 14 17:05:19 UTC 2020 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- Add 0002-allow-multiple-mounts-of-same-device.patch:
|
|
Allow mounting a device multiple times, e.g. to mount several
|
|
subvolumes from a Btrfs device or bind mounting the device to
|
|
multiple places, by also adding the path to the key.
|
|
[Workaround for gh#coreos/ignition#890]
|
|
|
|
-------------------------------------------------------------------
|
|
Wed Jan 8 17:47:30 UTC 2020 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- Add 0001-Throw-error-if-SSH-keys-could-not-be-written.patch:
|
|
Don't silently ignore if the SSH key could not be written
|
|
[boo#1159232]
|
|
|
|
-------------------------------------------------------------------
|
|
Mon Dec 23 09:16:22 UTC 2019 - iforster@suse.de
|
|
|
|
- Update to version 2.1.1:
|
|
* stages/files: don't relabel /home and /root symlinks
|
|
* tests/filesystems: fix error handling
|
|
* blackbox tests: don't swallow errors
|
|
* log: use os.ProcessState.ExitCode instead of unix
|
|
* travis: bump min go to 1.12
|
|
* news: add notes for 2.1.1
|
|
* readme: fix links, add validation container docs
|
|
* Dockerfile: add dockerfile for ignition-validate
|
|
* news: add news for v2.1.0
|
|
* README.md: add details about dracut and branches here
|
|
* doc/operator-notes: simplify SELinux section
|
|
* mount: also relabel mount points
|
|
* util: factor out FindFirstMissingDirForFile function
|
|
* files: perform relabeling from initrd
|
|
* doc/examples: Make example file path valid
|
|
* Rework fetch/resource to automatically append required headers
|
|
|
|
-------------------------------------------------------------------
|
|
Wed Nov 20 10:29:29 UTC 2019 - iforster@suse.de
|
|
|
|
- Update to version 2.0.1+git20191112.a924dd7:
|
|
* tests: remove unused partitions, dead code
|
|
* internal,tests: abolish syscall package
|
|
* vendor: include golang.org/x/sys/unix
|
|
* providers: add ibmcloud
|
|
- turn off SELinux by default
|
|
|
|
-------------------------------------------------------------------
|
|
Thu Nov 07 17:45:13 UTC 2019 - kukuk@suse.de
|
|
|
|
- Update to version 2.0.1+git20191106.809f44a:
|
|
* Add test cases for file system mount options
|
|
* Add translator for Filesystem struct
|
|
* Document file system mount options
|
|
* Implement file system mount options
|
|
* providers: add initial zVM hypervisor support
|
|
* travis: test on arm, use new ubuntu, cleanup
|
|
* config/v3_1_exp/types: validate http(s) proxies
|
|
* tests: remove unused stub for id
|
|
* distro: turn on SELinux by default
|
|
* Add filesystem mount options to schema
|
|
* files/passwd: don't shell out to id
|
|
* files/passwd: clean up repetitive code
|
|
* providers/aliyun: Add aliyun
|
|
* release-checklist: mention mantle cl branch for 0.x.y releases
|
|
* config/v3*: don't warn on unset mode if appending
|
|
|
|
-------------------------------------------------------------------
|
|
Fri Sep 27 11:17:00 UTC 2019 - kukuk@suse.de
|
|
|
|
- Update to version 2.0.1+git20190925.641ec6a:
|
|
* selinux: use /run/systemd/relabel-extra.d for etc
|
|
* resource/url: Don't use a tmpfile in FetchToBuffer
|
|
* resource/url: use only needed ifaces in fetchFrom*
|
|
* resource/url: make FetchFrom* private
|
|
* Add a `fetch` stage
|
|
* build: Add `make install`
|
|
* tests: fix bb tests for size/start 0
|
|
* Continue on empty GPT partition label
|
|
* files/selinux: deglob user/group related paths
|
|
* stages/files: relabel masking symlinks for systemd
|
|
* engine: Write `/run/ignition.json` atomically
|
|
* vendor: Add github.com/google/renameio
|
|
* stages/filesystems: drop stray debug print
|
|
* doc/supported-platforms: mention qemu version requirements
|
|
* Source build file correctly
|
|
* resource/url: update schema version in Accept header
|
|
* fix check path mount
|
|
- Drop 0001-Continue-on-empty-GPT-partition-label.patch: Added
|
|
upstream
|
|
|
|
-------------------------------------------------------------------
|
|
Mon Sep 02 16:34:22 UTC 2019 - iforster@suse.de
|
|
|
|
- Update to version 2.0.1+git20190802.d523754:
|
|
* main: log stage at startup
|
|
- Add 0001-Continue-on-empty-GPT-partition-label.patch
|
|
|
|
-------------------------------------------------------------------
|
|
Fri Jul 26 08:36:17 UTC 2019 - kukuk@suse.de
|
|
|
|
- Update to version 2.0.1+git20190725.10b85d1:
|
|
* release-checklist: add step to submit to bodhi
|
|
* news: add news for v2.0.1
|
|
* config/v*: run Node.Validate() as well
|
|
* doc/getting-started: rm online validator section
|
|
* providers/aws: get region after getting config.
|
|
* providers: allow FetchConfig to mutate the fetcher
|
|
* release-checklist: fix for new website and jenkins
|
|
|
|
-------------------------------------------------------------------
|
|
Thu Jun 6 15:32:37 CEST 2019 - kukuk@suse.de
|
|
|
|
- Update to version 2.0.0+git20190603.0c1da80:
|
|
* news: update for v2.0.0
|
|
* build*: use --always with git describe
|
|
* vendor: switch to coreos/vcontext
|
|
* config/validate: add tests for duplicate checking
|
|
* build: export GOFLAGS so they get used
|
|
* config/validate: add test for validation
|
|
* config/validate: check for unused keys
|
|
* internal/util/docs: update to use new validation
|
|
* internal: update to use new validation code
|
|
* config/validate: replace old validation with vcontext
|
|
* config/v3*: update to use new validation functions
|
|
* vendor: add vcontext
|
|
* internal: create dev aliases in /run/ignition/ instead of /
|
|
* Update hostname example
|
|
* tests/*: rename bb tests
|
|
* release-checklist: split out 0.x and 2.x+ bits
|
|
|
|
-------------------------------------------------------------------
|
|
Thu May 02 09:14:07 UTC 2019 - kukuk@suse.de
|
|
|
|
- Update to version 2.0.0~beta+git20190429.1eeb201:
|
|
* build_releases: update for using go mod
|
|
* news: add news for v2.0.0-beta
|
|
* doc: mv spec 3.1.0 -> 3.1.0-experimental
|
|
* contributing.md: add pointer to development guide
|
|
* doc/operator-notes: add section on config merging
|
|
* test: turn on docs checking
|
|
* doc/migrating-configs.md: update for spec 3.0.0
|
|
* doc/development.md: update doc for spec 3.0.0
|
|
* doc/getting-started.md: update for spec 3.0.0
|
|
* doc/examples.md: update for spec 3.0.0
|
|
|
|
-------------------------------------------------------------------
|
|
Thu Apr 25 07:40:40 UTC 2019 - kukuk@suse.de
|
|
|
|
- Update to version 0.30.0+git20190424.9212ea6:
|
|
* doc: add docs for existing link behavior
|
|
* tests: add test for matching links
|
|
* tests: fix test runner to link in the correct root
|
|
* stages/files: do not fail if links are correct
|
|
* tests/positive: test hardlinking to symlinks
|
|
* tests/validator: use os.Lstat() not os.Stat()
|
|
* config/*/types/storage: fail on hardlinked dirs
|
|
|
|
-------------------------------------------------------------------
|
|
Tue Apr 23 07:39:41 UTC 2019 - kukuk@suse.de
|
|
|
|
- Update to version 0.30.0+git20190417.ccc74c4:
|
|
* doc/config-v3_*: Add notes about uniqueness
|
|
|
|
-------------------------------------------------------------------
|
|
Mon Apr 15 11:32:53 UTC 2019 - kukuk@suse.de
|
|
|
|
- Update to version 0.30.0+git20190411.205ae79:
|
|
* providers/vmware: update for new vmware library
|
|
* vendor: update to use vmware libraries
|
|
* tests: update code for google's uuid package
|
|
* vendor: switch to github.com/google/uuid
|
|
* vendor: bump go-semver to latest
|
|
* vendor: update aws-sdk-go to latest tag
|
|
* doc: Document new proxy configuration options
|
|
* vendor: Add golang.org/x/net/http/httpproxy dep
|
|
* tests: Initial positive/negative tests
|
|
* engine: Update http client based on proxy config
|
|
* schema: Add proxy config and properties
|
|
* *: bump import path
|
|
* platform: drop "pxe"
|
|
* doc: add documentation for 3.1.0-experimental spec
|
|
* tests: turn on 3.1.0-experimental tests
|
|
* *: switch to using 3.1.0-experimental everywhere
|
|
* tests: don't fail on 3.1.0-experimental
|
|
* config: add v3.1.0-experimental spec
|
|
* tests/runner: use generic parse
|
|
* providers/util: use generic parse
|
|
* internal/engine: use generic parse
|
|
* tests: add test for directory correction
|
|
* doc/spec-3_0: clarify behavior with overwrite
|
|
* stages/file: fail if relabeling and no restorecon
|
|
* stages/files: allow directory matching
|
|
* config/v3_0/types: add files verification tests
|
|
* config/v3_0/types/file: add more validation
|
|
* config/helpers: make StrToPtr strict
|
|
* doc/spec-3_0: clarify overwrite behavior
|
|
* stages/files: refactor overwrite handling
|
|
* config/v3_0: disallow overwrite and nil source
|
|
* config: validate fs entries dont use symlinks
|
|
* platform: drop compat alias for "ec2" platform ID
|
|
* config/shared/errors: drop unused errors
|
|
* doc/spec-v3_0: remove deprecated size and start
|
|
* tests: add test for file conflicts
|
|
* stages/files: check that files dont conflict
|
|
* config: remove partition start and size
|
|
* internal: don't use partitions.{size,start}
|
|
* tests: change partitioning bb to use MiB
|
|
* build_blackbox_tests: fix for go mod
|
|
* stages/files: fix unit relabeling to exclude DestDir
|
|
* Fix configspec link to remove `-experimental`
|
|
* doc/spec-v3_0: update to not be -experimental
|
|
* tag_release: allow -suffixes on tags
|
|
* doc/spec-v3_0: remove docs on removed field
|
|
* doc: drop -experimental from spec filename
|
|
* news: add news for 2.0.0-alpha
|
|
* tests/positive/general: use hashes from server
|
|
* tests: make servers generate their own hashes
|
|
* *: stablize spec 3.0.0
|
|
* stages/files: fix relabel path to be relative to sysroot
|
|
* tests: add bb test for invalid merged configs
|
|
* exec/engine: validate merged config before use
|
|
* tests/blackbox: make runner print config
|
|
* config/types: call IgnoreDuplicates correctly
|
|
* config: test to ensure config type is valid
|
|
* config/types: de-pointer config.ignition.replace
|
|
* config/merge: add tests
|
|
* config: replace config appending with merging
|
|
* config/v3_0_exp: rename config.append to merge
|
|
* config: rework schema for better merging
|
|
* *: rename ec2 -> aws and gce -> gcp
|
|
* stages/files: Also relabel subuid/subgid files
|
|
* doc/config-spec: drop passwd.users.create
|
|
* config: drop passwd.users.create
|
|
* config/validate: allow dups on some fields
|
|
* config/validate_test: add tests for detecting dups
|
|
* doc/config-v3_0_exp: add doc for new append logic
|
|
* config/v3_0_exp: reject duplicate partition labels
|
|
* config/v3_0_exp: require partition label or number
|
|
* config/validate: validate no duplicates exist
|
|
* config/v3_0_exp/types: implement Key() for types
|
|
* tests/files: add test appending to existing file
|
|
* tests: apply mode/owner in bb test runner input
|
|
* config/v3_0_exp/types: rework storage.files.append
|
|
* config: refactor
|
|
* *: use config/ver instead of internal/config
|
|
* config: move json schema to be with its types
|
|
* test: don't validate docs
|
|
* tests/negative/files: add ForceFileCreationNoOverwrite
|
|
* *: default file.overwrite config option to false
|
|
* tests/positive/passwd: add test UseAuthorizedKeysFile
|
|
* tests/*: expose env vars through Test.Env
|
|
* internal/*: drop merging authorized_keys.d into authorized_keys
|
|
* vendor: switch to go modules
|
|
* MAINTAINERS: update
|
|
|
|
-------------------------------------------------------------------
|
|
Mon Mar 18 17:36:58 UTC 2019 - Ignaz Forster <iforster@suse.com>
|
|
|
|
- Copy binary to dracut module directory as required by
|
|
https://github.com/coreos/ignition-dracut/commit/b11553f9e2b530fbbb5a2504bc72b364829c879c
|
|
|
|
-------------------------------------------------------------------
|
|
Mon Mar 04 14:10:54 UTC 2019 - kukuk@suse.de
|
|
|
|
- Update to version 0.30.0+git20190301.2ce015b:
|
|
* tests: add test ensuring correct ordering of nodes
|
|
* tests: move failing tests to negative
|
|
* stages/files: sort entries by resolved depth
|
|
* Fix function comments based on best practices from Effective Go
|
|
* tests: add bb test for mounting with sylminks
|
|
* stages/mount: fail if mount paths involve symlinks
|
|
* internal/exec/util: make SplitPath public
|
|
* config/translate: add unit tests
|
|
* config/translate: add reflection based translator
|
|
* internal/distro: use relative paths
|
|
* exec/util/passwd: rename authorized_keys.d fragment to "ignition"
|
|
|
|
-------------------------------------------------------------------
|
|
Wed Feb 27 13:52:29 UTC 2019 - kukuk@suse.de
|
|
|
|
- Update to version 0.30.0+git20190225.7de027b:
|
|
* oem: add metal oem
|
|
* internal/exec: use nonzero default file permissions
|
|
* *: drop OEM terminology
|
|
* tests: drop OEMLookaside type
|
|
* *: drop OEM URI support
|
|
* tests/validator: show formatted os.FileMode in validateMode error
|
|
* doc/configuration-v3_0_exp: update with fs changes
|
|
* tests: refactor bb tests, add mount/umount stages
|
|
* exec/stages: add mount and umount stages
|
|
* tests/*: update bb tests for new fs semantics
|
|
* exec/*: rework files and filesystems
|
|
* validate/report: add helpers to cut verbosity
|
|
* engine: log configs on failure and fetched urls
|
|
* engine: clear highlights before logging reports
|
|
* internal/exec: log hashes of configs not configs
|
|
|
|
-------------------------------------------------------------------
|
|
Tue Feb 19 15:12:40 UTC 2019 - kukuk@suse.de
|
|
|
|
- Update to version 0.30.0+git20190215.cc767cc:
|
|
* vendor: remove unused dependency go4.org
|
|
* config: replace go4's errorutil with own impl
|
|
|
|
-------------------------------------------------------------------
|
|
Fri Feb 15 12:15:58 UTC 2019 - kukuk@suse.de
|
|
|
|
- Update to version 0.30.0+git20190206.aad24ad:
|
|
* doc/development: add note to run individual blackbox tests
|
|
* tests/types: add comments on some members of Test
|
|
* internal/*: drop support for default.ign config files
|
|
|
|
-------------------------------------------------------------------
|
|
Wed Jan 30 14:16:05 UTC 2019 - kukuk@suse.de
|
|
|
|
- Update to version 0.30.0+git20190124.fd1e703:
|
|
* docs: fix stale link to config 2.x
|
|
|
|
-------------------------------------------------------------------
|
|
Mon Jan 14 11:39:00 UTC 2019 - kukuk@suse.de
|
|
|
|
- Update to version 0.30.0+git20190111.96f8aae:
|
|
* Replace cobra with built-in flag
|
|
* *: drop networkd section
|
|
* travis: bump min go version to 1.10.x
|
|
|
|
-------------------------------------------------------------------
|
|
Fri Jan 11 13:25:29 UTC 2019 - kukuk@suse.de
|
|
|
|
- Update to version 0.30.0+git20190110.5a28cac:
|
|
* docs: remove config 2.x, add config 3.0.0 spec doc
|
|
* config/*: drop cloudinit support
|
|
* config: rip out all v1, v2.x configs
|
|
* tests: update all versions to 3.0.0-experimental
|
|
* config: replace v2_4 with v3_0_exp
|
|
* types/v2_4_exp: rename to 3_0_exp
|
|
* tests/timeouts: fix concurrency panic
|
|
* internal/oem: drop vagrant-virtualbox
|
|
* internal/oem: drop noop OEMs
|
|
* Rename `coreos.config.*` options to `ignition.config.*` to make options more distribution neutral
|
|
|
|
-------------------------------------------------------------------
|
|
Wed Dec 19 14:09:12 UTC 2018 - kukuk@suse.de
|
|
|
|
- Update to version 0.30.0+git20181218.641adcb:
|
|
* readme: add note about branching
|
|
* release-checklist: correctly select GPG subkey ID
|
|
* release-checklist: bump Fedora specfile
|
|
* release-checklist: fix tag_release script name
|
|
* news: add news for 0.30.0
|
|
* doc/development: add "kind/release" label to release issues
|
|
* test: skip backward compat tests with -test.short
|
|
* tests/partitioning: add minversion to complex mb
|
|
* tests: add -list flag to blackbox tests
|
|
* stages/filesystems: parallelize creation
|
|
* tests: add test for multiple data filesystems
|
|
* internal/exec: increase default config fetch timeout
|
|
|
|
-------------------------------------------------------------------
|
|
Wed Dec 12 15:53:36 UTC 2018 - kukuk@suse.de
|
|
|
|
- Update to version 0.29.1+git20181206.b1ab0b2:
|
|
* news: add news for 0.29.1
|
|
* tests: add bb test for symlink resolution
|
|
* exec/util: use Lstat() for existance checks
|
|
* exec/util: don't follow links for last path elem
|
|
* internal/resource: use earlyrand
|
|
* internal: add earlyrand
|
|
* news: add news for 0.29.0
|
|
* doc/migrating-configs: make link to doc relative
|
|
* docs: update migrating config guide for 2.3.0
|
|
* docs: add config spec for 2.4.0, update 2.3.0
|
|
* tests: update to include 2.4.0-experimental
|
|
* *: switch packages to use new experimental package
|
|
* config/v2_4_experimental: add package
|
|
* config/v2_3: update version to not be experimental
|
|
* config/v2_3: change package statements to v2_3
|
|
* config/2_3: move 2.3.0-exp to 2.3.0
|
|
* schema: use mebibytes not megabytes for partitions
|
|
* schema: fix incorrect case
|
|
* docs/operator-notes: add notes about symlinks
|
|
* tests: add bb tests for symlink resolution
|
|
* internal/exec: fix util.JoinPath symlink handling
|
|
* vendor: sync after glide updates
|
|
* glide: update go-systemd to v18
|
|
* glide: pin transitive deps for aws-sdk-go
|
|
* tests/validator: be more verbose about links
|
|
* internal/providers/packet: don't send success to packet from Ignition
|
|
* resource: add support for ?versionId on s3:// URL download
|
|
* config/v2.1+/link: allow relative paths for target
|
|
|
|
-------------------------------------------------------------------
|
|
Tue Oct 16 14:06:49 UTC 2018 - kukuk@suse.de
|
|
|
|
- Update to version 0.28.0+git20181016.7785e61:
|
|
* release-checklist: move to .github and drop front matter
|
|
* stages/files: relabel files before systemd-sysctl
|
|
* blkid: Compile with -Werror=implicit-function-declaration
|
|
* config: Clarify semantics around certs
|
|
* stages/disks: fix extraneous udevadm settle
|
|
* glide: switch to tags where we can
|
|
* stages/files: relabel /var/home and /var/roothome
|
|
* tests: don't run files stage if disks failed
|
|
* glide.*: remove subpackages
|
|
* Revert "doc/development: update blackbox test instructions to low parallelism"
|
|
* tests: workaround umount issues
|
|
* docs/config-v2_3-exp: add sizeMB/startMB fields
|
|
* tests: new tests for size-mb and start-mb
|
|
* config/types/partition*: deprecate size/start
|
|
* internal: updates for size-mb and start-mb
|
|
* schema: add size-mb and start-mb to partitions
|
|
* internal/*: fix go-vet formatting errors
|
|
* build: clean before building
|
|
* travis: bump go versions
|
|
* doc/development: update blackbox test instructions to low parallelism
|
|
* tests: refactor handling of root partition
|
|
* tests: cleanup tests to use defer more
|
|
* tests: cleanup extraneous testing.T's
|
|
* tests: add a cancelation mechanism
|
|
* build_blackbox_tests: only compile top level tests
|
|
* release-checklist: explicitly merge the docs PR
|
|
* config/*/append*: remove unused code
|
|
|
|
-------------------------------------------------------------------
|
|
Thu Sep 6 17:11:56 CEST 2018 - kukuk@suse.de
|
|
|
|
- Initial version (0.28.0)
|
|
|