diff --git a/keepalive-init.patch b/keepalive-init.patch
index 6829a8a..454ce72 100644
--- a/keepalive-init.patch
+++ b/keepalive-init.patch
@@ -1,10 +1,13 @@
 Index: keepalived/etc/init.d/keepalived.suse.init
 ===================================================================
---- keepalived/etc/init.d/keepalived.suse.init.orig	2012-07-18 21:47:24.000000000 +0200
-+++ keepalived/etc/init.d/keepalived.suse.init	2012-11-20 17:43:43.261849625 +0100
-@@ -3,16 +3,16 @@
+--- keepalived/etc/init.d/keepalived.suse.init.orig
++++ keepalived/etc/init.d/keepalived.suse.init
+@@ -1,23 +1,24 @@
+ #! /bin/sh
+ 
  ### BEGIN INIT INFO
- # Provides:	 keepalived
+-# Provides:	 keepalived
++# Provides:		keepalived
  # Required-Start: $remote_fs $syslog
 -# Required-Stop : $remote_fs $syslog
 -# Default-Start : 3 5
@@ -14,14 +17,178 @@ Index: keepalived/etc/init.d/keepalived.suse.init
 +# Required-Stop:  $remote_fs $syslog
 +# Default-Start:  3 5
 +# Default-Stop:   0 1 2 6
-+# Short-Description: Start keepalived to manage IPVS & LVS
-+# Description:    Start keepalived to manage IPVS & LVS
++# Short-Description:	Start keepalived to manage IPVS & LVS
++# Description:	Start keepalived to manage IPVS & LVS
  ### END INIT INFO
  
  
- DAEMON="Keepalived daemon"
+-DAEMON="Keepalived daemon"
 -DAEMON_BIN="/usr/local/sbin/keepalived"
-+DAEMON_BIN="/usr/sbin/keepalived"
- DAEMON_CONF="/etc/keepalived/keepalived.conf"
- DAEMON_PIDFILE="/var/run/keepalived.pid"
- DAEMON_OPT="-d"
+-DAEMON_CONF="/etc/keepalived/keepalived.conf"
+-DAEMON_PIDFILE="/var/run/keepalived.pid"
+-DAEMON_OPT="-d"
++DAEMON='Keepalived daemon'
++DAEMON_BIN='/usr/sbin/keepalived'
++DAEMON_CONF='/etc/keepalived/keepalived.conf'
++DAEMON_SYSCONF='/etc/sysconfig/keepalived'
++DAEMON_PIDFILE='/var/run/keepalived.pid'
++KEEPALIVED_OPTIONS='-d'
+ #DAEMON_USER="root"
+-SUPPORTS_HUP="yes"    
++SUPPORTS_HUP='yes'
+ # "yes" if exist next values in freshclam.conf
+ #       PidFile /var/run/keepalived.pid
+ #       DatabaseOwner root
+@@ -25,7 +26,19 @@ SUPPORTS_HUP="yes"
+ pid_par=${DAEMON_PIDFILE:+"-p $DAEMON_PIDFILE"}
+ usr_par=${DAEMON_USER:+"-u $DAEMON_USER"}
+ 
+-test -x $DAEMON_BIN || exit 5
++test -x $DAEMON_BIN || { echo "$DAEMON_BIN not installed or executable";
++    if [ "$1" = "stop" ]; then exit 0;
++    else exit 5; fi; }
++
++
++test -r $DAEMON_CONF || { echo "$DAEMON_CONF not existing or readable";
++    if [ "$1" = "stop" ]; then exit 0;
++    else exit 6; fi; }
++
++# read sysconfig variables that might overwrite the daemon options
++if [ -r "$DAEMON_SYSCONF" ]; then
++   . "$DAEMON_SYSCONF"
++fi
+ 
+ # Shell functions sourced from /etc/rc.status:
+ #      rc_check         check and set local and overall rc status
+@@ -62,70 +75,70 @@ test -e $DAEMON_PIDFILE && ! test -s $DA
+ 
+ case "$1" in
+         start)
+-		echo -n "Starting $DAEMON "
+-		if test ! -f ${DAEMON_CONF}; then
+-		    echo -n >&2 "Configuration file, ${DAEMON_CONF} does not exist. "
+-		    rc_status -s
+-	    	    exit 6
+-		fi
+-		checkproc $pid_par ${DAEMON_BIN}
+-		case $? in
+-	    	    0) echo -n "- Warning: daemon already running. " ;;
+-		    1) echo -n "- Warning: ${DAEMON_PIDFILE} exists. " ;;
+-		esac
+-#		echo "startproc $usr_par $pid_par ${DAEMON_BIN} ${DAEMON_OPT}"
+-		startproc $usr_par $pid_par ${DAEMON_BIN} ${DAEMON_OPT}
+-		rc_status -v
+-		;;
+-	stop)
+-		echo -n "Shutting down $DAEMON "
+-		checkproc $pid_par ${DAEMON_BIN} || \
+-		echo -n " Warning: daemon not running. "
+-		killproc $pid_par -t 10 ${DAEMON_BIN}
+-		rc_status -v
+-		;;
+-	try-restart|condrestart)
+-		if test "$1" = "condrestart"; then
+-			echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
+-		fi
+-		$0 status
+-		if test $? = 0; then
+-			$0 restart
+-		else 
+-			rc_reset
+-		fi
+-		rc_status
+-		;;
+-	restart)
+-		$0 stop
+-		$0 start
+-		rc_status
+-		;;
+-	force-reload|reload)
+-	        if test "$SUPPORTS_HUP" = "yes"; then
+-	            echo -n "Reload service $DAEMON "
+-		    checkproc $pid_par ${DAEMON_BIN} && \
+-			touch ${DAEMON_PIDFILE} || \
+-			echo -n >&2 " Warning: daemon not running. "
+-		    killproc $pid_par -HUP ${DAEMON_BIN}
++        echo -n "Starting $DAEMON "
++        if test ! -f ${DAEMON_CONF}; then
++            echo -n >&2 "Configuration file, ${DAEMON_CONF} does not exist. "
++            rc_status -s
++                exit 6
++        fi
++        checkproc $pid_par ${DAEMON_BIN}
++        case $? in
++            0) echo -n "- Warning: daemon already running. " ;;
++            1) echo -n "- Warning: ${DAEMON_PIDFILE} exists. " ;;
++        esac
++#        echo "startproc $usr_par $pid_par ${DAEMON_BIN} ${KEEPALIVED_OPTIONS}"
++        startproc $usr_par $pid_par ${DAEMON_BIN} ${KEEPALIVED_OPTIONS}
++        rc_status -v
++        ;;
++    stop)
++        echo -n "Shutting down $DAEMON "
++        checkproc $pid_par ${DAEMON_BIN} || \
++        echo -n " Warning: daemon not running. "
++        killproc $pid_par -t 10 ${DAEMON_BIN}
++        rc_status -v
++        ;;
++    try-restart|condrestart)
++        if test "$1" = "condrestart"; then
++            echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
++        fi
++        $0 status
++        if test $? = 0; then
++            $0 restart
++        else
++            rc_reset
++        fi
++        rc_status
++        ;;
++    restart)
++        $0 stop
++        $0 start
++        rc_status
++        ;;
++    force-reload|reload)
++            if test "$SUPPORTS_HUP" = "yes"; then
++                echo -n "Reload service $DAEMON "
++            checkproc $pid_par ${DAEMON_BIN} && \
++            touch ${DAEMON_PIDFILE} || \
++            echo -n >&2 " Warning: daemon not running. "
++            killproc $pid_par -HUP ${DAEMON_BIN}
+                     rc_status -v
+-	        else
++            else
+                     $0 stop  &&  sleep 3  &&  $0 start
+                     rc_status
+-	        fi
+-    		;;
+-	status)
+-		echo -n "Checking for $DAEMON "
+-		checkproc $pid_par ${DAEMON_BIN}
+-		rc_status -v
+-		;;
+-	probe)
+-		test ${DAEMON_CONF} -nt ${DAEMON_PIDFILE} && echo reload
+-		;;
+-	*)
+-		echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
+-		exit 1
+-		;;
++            fi
++            ;;
++    status)
++        echo -n "Checking for $DAEMON "
++        checkproc $pid_par ${DAEMON_BIN}
++        rc_status -v
++        ;;
++    probe)
++        test ${DAEMON_CONF} -nt ${DAEMON_PIDFILE} && echo reload
++        ;;
++    *)
++        echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
++        exit 1
++        ;;
+ esac
+ rc_exit
+ 
diff --git a/keepalived.changes b/keepalived.changes
index f13852c..3b641c9 100644
--- a/keepalived.changes
+++ b/keepalived.changes
@@ -1,3 +1,12 @@
+-------------------------------------------------------------------
+Thu Feb 11 10:44:31 UTC 2016 - lars@linux-schulserver.de
+
+- enhanced keepalive-init.patch :
+  + replace tabs with spaces
+  + read /etc/sysconfig/keepalived, if exists and use the settings
+    there instead of the default KEEPALIVED_OPTIONS in case the 
+    user changed them
+
 -------------------------------------------------------------------
 Thu Jan 28 12:13:36 UTC 2016 - mrueckert@suse.de
 
diff --git a/keepalived.spec b/keepalived.spec
index 80e979e..08b5300 100644
--- a/keepalived.spec
+++ b/keepalived.spec
@@ -1,7 +1,7 @@
 #
 # spec file for package keepalived
 #
-# Copyright (c) 2015 SUSE LINUX GmbH, Nuernberg, Germany.
+# Copyright (c) 2016 SUSE LINUX GmbH, Nuernberg, Germany.
 #
 # All modifications and additions to the file contributed by third parties
 # remain the property of their copyright owners, unless otherwise agreed
@@ -34,9 +34,9 @@ Source1:        keepalived.service
 Source2:        keepalive-rpmlintrc
 Patch1:         keepalive-init.patch
 BuildRequires:  net-snmp-devel
-BuildRequires:  snmp-mibs
 BuildRequires:  openssl-devel
 BuildRequires:  pkgconfig
+BuildRequires:  snmp-mibs
 %if 0%{?suse_version} > 1110
 BuildRequires:  pkgconfig(libnl-3.0)
 %else
@@ -72,7 +72,7 @@ resilient infrastructures.
 
 %prep
 %setup -q
-%patch1
+%patch1 -p0
 
 %build
 export STRIP=true