From 207d2f2412162a1cbd56fa429fd8d853ccd9b75286ad75cf95376fc4c7e2a2b7 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Tue, 4 Oct 2011 05:01:20 +0000 Subject: [PATCH] OBS-URL: https://build.opensuse.org/package/show/Kernel:HEAD/kernel-source?expand=0&rev=7057 --- config-options.changes.txt | 1407 ------------------------------------ 1 file changed, 1407 deletions(-) delete mode 100644 config-options.changes.txt diff --git a/config-options.changes.txt b/config-options.changes.txt deleted file mode 100644 index 9476ab0e9..000000000 --- a/config-options.changes.txt +++ /dev/null @@ -1,1407 +0,0 @@ -------------------------------------------------------------------- -Tue Jun 21 11:38:10 UTC 2011 - mmarek@novell.com - -- Updated to 3.0-rc4: - - USB_NET_KALMIA=m - - BACKLIGHT_ADP8870=m - -------------------------------------------------------------------- -Fri Jan 21 02:35:17 CET 2011 - trenn@suse.de - -- CONFIG_EVENT_POWER_TRACING_DEPRECATED=y - power:power_start/end tracing events got replace by power:cpu_idle - Let's still throw the old ones as well for a while to stay - compatible with current userspace tools. - -------------------------------------------------------------------- -Mon Jan 10 15:31:41 CET 2011 - jeffm@suse.de - -- Enabled AGP modules to build as part of the static i386 kernel: - - bnc#609607 - - CONFIG_AGP_ALI=y - - CONFIG_AGP_ATI=y - - CONFIG_AGP_AMD=y - - CONFIG_AGP_NVIDIA=y - - CONFIG_AGP_SWORKS=y - - CONFIG_AGP_EFFICEON=y - -------------------------------------------------------------------- -Mon Dec 13 12:17:15 CEST 2010 - jbeulich@novell.com - -- */xen: XEN_NETDEV_LOOPBACK=n (no longer needed/supported). - -------------------------------------------------------------------- -Fri Dec 10 09:20:36 CEST 2010 - jbeulich@novell.com - -- */xen: CONFIG_XEN_COMPAT=0x040000. - -------------------------------------------------------------------- -Tue Nov 16 20:18:04 CET 2010 - jeffm@suse.de - -- Updated to 2.6.36-rc2: - - SYSFS_DEPRECATED: enable deprecated sysfs features to support - old userspace tools - - Disabled; defaults to n - - Userspace tools should be updated. If they aren't by - release time we can enable this. - - - JUMP_LABEL: Optimize trace point call sites - - With compiler support, allows trace points to be optimized - out entirely until used - - Enabled; defaults to n - - - BLK_DEV_THROTTLING: Block layer bio throttling support - - Adds a blkio cgroup container for creating per-device IO - rate policies - - Enabled; defaults to n - - - IRQ_TIME_ACCOUNTING: Fine granularity task level IRQ time accounting - - Adds a timestamp during transitions between softirq and - hardirq state - - Disabled; defaults to n - - There is a performance impact and its usefulness is - questionable unless you're working on a driver. - - - X86_RESERVE_LOW: Amount of low memory, in kilobytes, to reserve - for the BIOS - - Reserve low memory for the BIOS; Some BIOSes can trash parts - of low memory during suspend/resume or hotplug events - - Set to 64k; the default - - - PM_OPP: Operating Performance Point (OPP) Layer library - - Represents voltage domains for certain SoCs - - Disabled; defaults to n - - openSUSE isn't targetting x86-based SoCs so this is - unnecessary - - - BKL: Big Kernel Lock - - Enabled; defaults to y - - While it would be nice to answer n here, it's really only meant for - developers working on BKL removal - - - SPARSE_RCU_POINTER: RCU debugging: sparse-based checks for pointer usage - - Disabled; defaults to n - - - TEST_LIST_SORT: Linked list sorting test - - Disabled; defaults to n - - - PHONET_PIPECTRLR: Phonet Pipe Controller - - Disabled; defaults to n - - Experimental - - - BLK_DEV_RBD: Rados block device (RBD) - - The Rados block device, which stripes a block device over objects - stored in the Ceph distributed object store. - - Enabled as m; defaults to n - - - Networking features: - - NET_ACT_CSUM: Checksum Updating - - Update a common checksum after some direct packet alterations - - Enabled as m; defaults to n - - NET_IPGRE_DEMUX: IP: GRE demultiplexer - - This is helper module to demultiplex GRE packets on GRE version - field criteria. - - Enabled as m; defaults to n - - IP_VS_PE_SIP: SIP persistence engine - - Allow persistence based on the SIP Call-ID - - Enabled as m; defaults to n - - PPTP: PPP over IPv4 (PPTP) (EXPERIMENTAL) - - In-kernel acceleration for PPTP connections - - Enabled as m; defaults to n - - - File system features: - - FANOTIFY: Filesystem wide access notification - - Enabled; defaults to n - - FANOTIFY_ACCESS_PERMISSIONS: fanotify permissions checking - - Enabled; defaults to n - - NFS_USE_NEW_IDMAPPER: Use the new idmapper upcall routine (NFS) - - Disabled; defaults to n - - Can be enabled when userspace support is confirmed - - NFSD_DEPRECATED: Include support for deprecated syscall interface to NFSD - - Enabled; defaults to y - - Can be disabled when userspace support for the fs-based interface is - confirmed - - 9P_FS_POSIX_ACL: 9P POSIX Access Control Lists - - Enabled; defaults to n - - CEPH_LIB: Ceph core library - - cephlib, which provides the common functionality to both the Ceph - filesystem and to the rados block device (rbd). - - Enabled as m; defaults to n - - PRETTYDEBUG: Include file:line in ceph debug output - - Enabled; defaults to n - - There aren't a lot of ceph users out there and since this is still - experimental, any help in debugging is a plus. - - - New driver support; All are modular - - APDS9802ALS: Medfield Avago APDS9802 ALS Sensor module (APDS9802ALS) - - ALS APDS9802 ambient light sensor - - ISL29020: Intersil ISL29020 ambient light sensor - - SENSORS_BH1770: BH1770GLC / SFH7770 combined ALS - Proximity sensor - - SENSORS_APDS990X: APDS990X combined als and proximity sensors - - PCH_CAN: PCH CAN - - PCH CAN of Topcliff which is an IOH for x86 embedded processor - - PCH_PHUB: PCH Packet Hub of Intel Topcliff - - PCH_GBE: PCH Gigabit Ethernet - - GPIO_PCH: PCH GPIO of Intel Topcliff - - SPI_TOPCLIFF_PCH: Topcliff PCH SPI Controller - - GPIO_BASIC_MMIO: Basic memory-mapped GPIO controllers support - - GPIO_VX855: VIA VX855/VX875 GPIO - - GPIO_74X164: 74x164 serial-in/parallel-out 8-bits shift register - - BATTERY_BQ20Z75: TI BQ20z75 gas gauge - - SENSORS_GPIO_FAN: GPIO fan - - SENSORS_LTC4261: Linear Technology LTC4261 - - SENSORS_W83795: Winbond/Nuvoton W83795G/ADG - - SENSORS_W83795_FANCTRL: Include fan control support (DANGEROUS) - - Disabled; defaults to n - - CAN_TSCAN1: TS-CAN1 PC104 boards - - Technologic Systems' TSCAN-1 PC104 boards. - - OLPC_XO1: OLPC XO-1 support - - Support for non-essential features of the OLPC XO-1 laptop - - SCSI_CXGB4_ISCSI: Chelsio T4 iSCSI support - - BCM63XX_PHY: Broadcom 63xx SOCs internal PHY - - BNA: Brocade 1010/1020 10Gb Ethernet Driver support - - USB_NET_CX82310_ETH: Conexant CX82310 USB ethernet port - - TABLET_USB_HANWANG: Hanwang Art Master III tablet support (USB) - - TOUCHSCREEN_BU21013: BU21013 based touch panel controllers - - SERIO_PS2MULT: TQC PS/2 multiplexer - - I2C_MUX_PCA9541: NXP PCA9541 I2C Master Selector - - I2C_INTEL_MID: Intel Moorestown/Medfield Platform I2C controller - - MFD_MC13XXX: Freescale MC13783 and MC13892 - - MFD_VX855: VIA VX855/VX875 integrated south bridge - - REGULATOR_MAX8952: Maxim MAX8952 Power Management IC - - REGULATOR_LP3972: National Semiconductors LP3972 PMIC regulator driver - - IR_RC5_SZ_DECODER: raw decoder for the RC-5 (streamzap) protocol - - IR_NUVOTON: Nuvoton w836x7hg Consumer Infrared Transceiver - - VIDEO_VIVI: Virtual Video Driver - - VIDEO_SR030PC30: SR030PC30 VGA camera sensor - - VIDEO_VIA_CAMERA: VIAFB camera controller - - SOC_CAMERA_IMX074: imx074 support - - Enabled as module; defaults to n - - SOC_CAMERA_OV6650: ov6650 sensor - - USB_GSPCA_KONICA: Konica USB Camera V4L2 driver - - USB_GSPCA_XIRLINK_CIT: Xirlink C-It USB Camera - - DVB_USB_LME2510: LME DM04/QQBOX DVB-S USB2.0 support - - STUB_POULSBO: Intel GMA500 Stub Driver - - SND_ALOOP: Generic loopback driver (PCM) - - SND_AZT1605: Aztech AZT1605 Driver - - SND_AZT2316: Aztech AZT2316 Driver - - HID_UCLOGIC: UC-Logic - - HID_WALTOP: Waltop - - HID_ROCCAT_PYRA: Roccat Pyra mouse support - - USB_UAS: USB Attached SCSI - - USB_SERIAL_SAMBA: USB Atmel SAM Boot Assistant (SAM-BA) driver - - USB_YUREX: USB YUREX driver support - - MMC_USHC: USB SD Host Controller (USHC) support - - EDAC_MCE_INJ: Simple MCE injection interface over /sysfs - - EDAC_I7300: Intel Clarksboro MCH - - IDEAPAD_LAPTOP: Lenovo IdeaPad Laptop Extras - - IBM_RTL: IBM Premium Real Time Mode - - XO1_RFKILL: OLPC XO-1 software RF kill switch - - R8712U: RealTek RTL8712U (RTL8192SU) Wireless LAN NIC driver - - R8712_AP: Realtek RTL8712U AP code - - Disabled; defaults to n - - CARL9170: Linux Community AR9170 802.11n USB support - - This is another driver for the Atheros "otus" 802.11n USB devices. - - CARL9170_LEDS: SoftLED Support - - Necessary for LED blinking - - Enabled; defaults to y - - CARL9170_DEBUGFS: DebugFS Support - - Disabled; defaults to n - - STMMAC_ETH: STMicroelectronics 10/100/1000 Ethernet driver - - STMMAC_DA: STMMAC DMA arbitration scheme - - forces rx priority over tx instead of 1:1 priority - - Disabled; defaults to n - - STMMAC_DUAL_MAC: STMMAC: dual mac support (EXPERIMENTAL) - - Some ST SoCs (for example the stx7141 and stx7200c2) have - two Ethernet Controllers. This option turns on the second - Ethernet device on this kind of platforms. - - Enabled; defaults to n - - - Staging Drivers: - - SENSORS_ISL29018: ISL 29018 light and proximity sensor - - SENSORS_AK8975: Asahi Kasei AK8975 3-Axis Magnetometer - - LIRC_PARALLEL: Homebrew Parallel Port Receiver for LIRC - - SBE_2T3E3: SBE wanPMC-2T3E3 support - - USB_ENESTORAGE: USB ENE card reader support - - BCM_WIMAX: Beceem BCS200/BCS220-3 and BCSM250 wimax support - - FT1000: Flarion ft1000 - - FT1000_USB: ft1000 usb devices - - Enabled as module; defaults to n - - SPEAKUP: Speakup core - - SPEAKUP_SYNTH_ACNTSA: Accent SA synthesizer support - - SPEAKUP_SYNTH_ACNTPC: Accent PC synthesizer support - - SPEAKUP_SYNTH_APOLLO: Apollo II synthesizer support - - SPEAKUP_SYNTH_AUDPTR: Audapter synthesizer support - - SPEAKUP_SYNTH_BNS: Braille 'n' Speak synthesizer support - - SPEAKUP_SYNTH_DECTLK: DECtalk Express synthesizer support - - SPEAKUP_SYNTH_DECEXT: DECtalk External (old) synthesizer support - - SPEAKUP_SYNTH_DECPC: DECtalk PC (big ISA card) synthesizer support - - SPEAKUP_SYNTH_DTLK: DoubleTalk PC synthesizer support - - SPEAKUP_SYNTH_KEYPC: Keynote Gold PC synthesizer support - - SPEAKUP_SYNTH_LTLK: DoubleTalk LT/LiteTalk synthesizer support - - SPEAKUP_SYNTH_SOFT: Userspace software synthesizer support - - SPEAKUP_SYNTH_SPKOUT: Speak Out synthesizer support - - SPEAKUP_SYNTH_TXPRT: Transport synthesizer support - - SPEAKUP_SYNTH_DUMMY: Dummy synthesizer driver (for testing) - - RTC_DRV_MC13XXX: Freescale MC13xxx RTC - - BRCM80211: Broadcom IEEE802.11n WLAN drivers - - AD799X: Analog Devices AD799x ADC driver - - AD7476: Analog Devices AD7475/6/7/8 AD7466/7/8 and AD7495 ADC driver - - ATH6K_LEGACY: Atheros AR6003 support (non mac80211) - - ATH6KL_ENABLE_COEXISTENCE: BT Coexistence support - - Enabled; defaults to n - - ATH6KL_HCI_BRIDGE: HCI over SDIO support - - Enabled; defaults to n - - ATH6KL_CONFIG_GPIO_BT_RESET: Configure BT Reset GPIO - - Disabled; defaults to n - - Maybe should be enabled? - - ATH6KL_CFG80211: CFG80211 support - - Enabled; defaults to n - - ATH6KL_HTC_RAW_INTERFACE: RAW HTC support - - Enabled; defaults to n - - ATH6KL_VIRTUAL_SCATTER_GATHER: Virtual Scatter-Gather support - - Enabled; defaults to n - - ATH6KL_SKIP_ABI_VERSION_CHECK: Skip ABI version check support - - Disabled; defaults to n - - ATH6KL_DEBUG: Debug support - - Disabled; defaults to n - - - Driver options: - - ATH9K_RATE_CONTROL: Atheros ath9k rate control - - Enabled; defaults to y - - IWLWIFI_DEBUG_EXPERIMENTAL_UCODE: Experimental uCode support in iwlwifi - - Disabled; defaults to n - - Users wanting to replace their microcode can build their own kernels - - P54_SPI_DEFAULT_EEPROM: Include fallback EEPROM blob (Prism54) - - Disabled; defaults to n - - VIDEO_SAA7134_RC: Philips SAA7134 Remote Controller support - - Enabled; defaults to y - - SND_HDA_CODEC_HDMI: HDMI/DisplayPort HD-audio codec support for - Intel HD Audio - - Enabled; defaults to y - - LOGIWII_FF: Logitech Speed Force Wireless force feedback support - - Enabled; defaults to y - - KVM_MMU_AUDIT: Audit KVM MMU - - Enabled; defaults to n - - Adds a R/W module parameter which allows auditing at runtime - - MMC_BLOCK_MINORS: Number of minors per MMC block device - - Set to 8; defaults to 8 - - LINE6_USB_DEBUG: Line6 USB - print debug messages - - Disabled; defaults to n - - LINE6_USB_DUMP_CTRL: Line6 USB - dump control messages - - Disabled; defaults to n - - LINE6_USB_DUMP_MIDI: Line6 USB - dump MIDI messages - - Disabled; defaults to n - - LINE6_USB_DUMP_PCM: Line6 USB - dump PCM data - - Disabled; defaults to n - - LINE6_USB_RAW: Line6 USB - raw data communication - - Disabled; defaults to n - - LINE6_USB_IMPULSE_RESPONSE: Line6 USB - measure impulse response - - Measures the impulse response of a Line6 device - - Disabled; defaults to n - - Not required for normal operation - - - Disabled drivers: - - MFD_WM831X_SPI: Wolfson Microelectronics WM831x/2x PMICs with SPI - - Only available in static kernel - -------------------------------------------------------------------- -Tue Oct 26 21:55:06 CEST 2010 - trenn@suse.de - -- Enable ACPI_EC_DEBUGFS=m for Embedded Controller debug facility - -------------------------------------------------------------------- -Mon Oct 25 12:55:06 CEST 2010 - jbeulich@novell.com - -- */xen: X86_MSR=m (to discourage use without considering whether - the intended context is a virtual or a physical CPU) - -------------------------------------------------------------------- -Wed Aug 18 00:18:28 CEST 2010 - jeffm@suse.de - -- Updated to 2.6.36-rc1: - - ACPI_EC_DEBUGFS: EC read/write access through /sys/kernel/debug/ec - - Debugging feature for developing ACPI EC drivers - - Can put system in a state that can only be recovered from - by a full power cycle - - Disabled; defaults to n - - - ACPI_APEI_ERST_DEBUG: EI Error Record Serialization Table (ERST) Debug - Support - - Debugging feature for testing ERST - - Disabled; defaults to n - - - INTEL_IDLE: Cpuidle Driver for Intel Processors - - Has processor-specific support that may perform better than acpi_idle - - Enabled; defaults to n - - - OLPC_OPENFIRMWARE: Support for OLPC's Open Firmware - - Enabled on i386-default only, depends on !X86_64 and !X86_PAE - - Enabled; defaults to y - - - NETWORK_PHY_TIMESTAMPING: Timestamping in PHY devices - - Adds overhead to the transmit/receive path - - Disabled; defaults to n - - - BT_HCIUART_ATH3K: Atheros AR300x serial support - - This protocol enables AR300x chips to be enabled with power - management support. - - Enabled; defaults to n - - - HPWDT_NMI_DECODING: NMI decoding support for the HP ProLiant iLO2+ - Hardware Watchdog Timer - - Option for driver already configured as module - - Enabled; defaults to n - - - New netfilter modules: - - NETFILTER_XT_TARGET_CHECKSUM: CHECKSUM target support - - NETFILTER_XT_TARGET_IDLETIMER: IDLETIMER target support - - NETFILTER_XT_MATCH_CPU: "cpu" match support - - Allows matching based on the cpu handling the packet - - NETFILTER_XT_MATCH_IPVS: "ipvs" match support - - Allows matching against the IPVS properties of a packet - - - New driver support; all are modular: - - CAN_ESD_USB2: ESD USB/2 CAN/USB interface - - SENSORS_BH1780: ROHM BH1780GLI ambient light sensor - - HMC6352: Honeywell HMC6352 compass - - BMP085: BMP085 digital pressure sensor - - FIREWIRE_NOSY: Nosy - a FireWire traffic sniffer for PCILynx cards - - CHELSIO_T4VF: Chelsio Communications T4 Virtual Function Ethernet support - - WL1271_SDIO: TI wl1271 SDIO support - - KEYBOARD_MCS: MELFAS MCS Touchkey - - TOUCHSCREEN_AD7879_SPI: AD7879-1/AD7889-1 SPI bus support - - TOUCHSCREEN_CY8CTMG110: cy8ctmg110 touchscreen - - TOUCHSCREEN_QT602240: QT602240 I2C Touchscreen - - INPUT_ADXL34X: Analog Devices ADXL34x Three-Axis Digital Accelerometer - - INPUT_ADXL34X_I2C: I2C bus connection - - INPUT_ADXL34X_SPI: SPI bus connection - - SERIAL_MAX3107: MAX3107 support - - SERIAL_MRST_MAX3110: SPI UART driver for Max3110 - - MRST_MAX3110_IRQ: GPIO IRQ over Moorestown - - SERIAL_MFD_HSU: Medfield High Speed UART support - - I2C_MUX: I2C bus multiplexing support - - I2C_MUX_PCA954x: Philips PCA954x I2C Mux/switches - - SENSORS_PKGTEMP: Intel processor package temperature sensor - - SENSORS_JC42: JEDEC JC42.4 compliant temperature sensors - - SENSORS_SMM665: Summit Microelectronics SMM665 - - SENSORS_EMC2103: SMSC EMC2103 - - F71808E_WDT: Fintek F71808E and F71882FG Watchdog - - MFD_TPS6586X: TPS6586x Power Management chips - - REGULATOR_ISL6271A: Intersil ISL6271A Power regulator - - REGULATOR_AD5398: Analog Devices AD5398/AD5821 regulators - - REGULATOR_TPS6586X: TI TPS6586X Power regulators - - IR_LIRC_CODEC: Enable IR to LIRC bridge - - IR_MCEUSB: Windows Media Center Ed. eHome Infrared Transceiver - - IR_ENE: ENE eHome Receiver/Transciever - - IR_STREAMZAP: Streamzap PC Remote IR Receiver - - USB_GSPCA_SPCA1528: SPCA1528 USB Camera Driver - - USB_GSPCA_SQ930X: SQ Technologies SQ930X based USB Camera Driver - - HID_ACRUX_FF: ACRUX force feedback support - - HID_ELECOM: ELECOM - - CAIF_SPI_SLAVE: CAIF SPI transport driver for slave interface - - CAIF_SPI_SYNC: Next command and length in start of frame - - Needs to also be enabled on the modem - - Disabled; Defaults to n - - USB_SERIAL_SSU100: USB Quatech SSU-100 Single Port Serial Driver - - RTC_DRV_DS3232: Dallas/Maxim DS3232 - - RTC_DRV_ISL12022: Intersil ISL12022 - - INTEL_MID_DMAC: Intel MID DMA support for Peripheral DMA controllers - - PCH_DMA: Topcliff PCH DMA support - - DRM_I2C_SIL164: Silicon Image sil164 TMDS transmitter - - SPECTRA: Denali Spectra Flash Translation Layer - - SENSORS_HMC5843: Honeywell HMC5843 3-Axis Magnetometer - - ZRAM: Compressed RAM block device support - - ZRAM_STATS: Enable statistics for compressed RAM disks (=y) - - ATM_NICSTAR: IDT 77201 (NICStAR) (ForeRunnerLE) - - ATM_NICSTAR_USE_SUNI: suni PHY driver (155Mbps) (=y) - - ATM_NICSTAR_USE_IDT77105: IDT77015 PHY driver (25Mbps) (=y) - - TWL6030_PWM: TWL6030 PWM (Pulse Width Modulator) Support - - ZFCP_DIF: T10 DIF/DIX support for the zfcp driver - - VIDEO_SH_MOBILE_CSI2: SuperH Mobile MIPI CSI-2 Interface driver - - - Staging drivers, enabled as modules: - - LIRC_STAGING: Linux Infrared Remote Control IR receiver/transmitter - drivers - - LIRC_BT829: BT829 based hardware - - LIRC_I2C: I2C Based IR Receivers - - LIRC_IGORPLUGUSB: Igor Cesko's USB IR Receiver - - LIRC_IMON: Legacy SoundGraph iMON Receiver and Display - - LIRC_IT87: ITE IT87XX CIR Port Receiver - - LIRC_ITE8709: ITE8709 CIR Port Receiver - - LIRC_SASEM: Sasem USB IR Remote - - LIRC_SERIAL: Homebrew Serial Port Receiver - - LIRC_SERIAL_TRANSMITTER: Serial Port Transmitter (=y) - - LIRC_PARALLEL: Homebrew Parallel Port Receiver - - LIRC_SIR: Built-in SIR IrDA port - - LIRC_TTUSBIR: Technotrend USB IR Receiver - - LIRC_ZILOG: Zilog/Hauppauge IR Transmitter - - EASYCAP: A/V driver for EasyCAP cards - - SOLO6X10: Softlogic 6x10 MPEG codec cards - - ACPI_QUICKSTART: ACPI Quickstart key driver - - IDEAPAD_ACPI: Lenovo IdeaPad ACPI Laptop Extras - - INTEL_IPS: Intel Intelligent Power Sharing - - HYPERV_BLOCK: Microsoft Hyper-V virtual block driver - - - File systems - - FANOTIFY: Filesystem wide access notification (=y) - - FANOTIFY_ACCESS_PERMISSIONS: fanotify permissions checking (=y) - - Squashfs options - - SQUASHFS_XATTR: Squashfs XATTR support (=y) - - SQUASHFS_LZO: Include support for LZO compressed file systems (=y) - - NFS options - - NFS_USE_LEGACY_DNS: Use the legacy NFS DNS resolver (=n) - - CIFS options - - CIFS_FSCACHE: Provide CIFS client caching support (=n) - - Experimental - - - Other options: - - LOCKUP_DETECTOR: Detect Hard and Soft Lockups (=y) - - BOOTPARAM_SOFTLOCKUP_PANIC: Panic (Reboot) On Soft Lockups (=n) - - DEBUG_INFO_REDUCED: Reduce debugging information (=n) - - We split out debuginfo so disk space savings at the expense of - completeness is a disadvantage - - CRYPTO_MANAGER_TESTS: Run algolithms' self-tests (=y) - - - Drivers that are disabled, for not having module support - - GPIO_SX150X: Semtech SX150x I2C GPIO expander - - MFD_STMPE: Support STMicroelectronics STMPE - - MFD_MAX8998: Maxim Semiconductor MAX8998 PMIC Support - - PPC_MPC512x: 512x-based boards (ppc only) - - - TI_ST: shared transport core driver - - Now disabled. Doesn't build. - -------------------------------------------------------------------- -Mon Aug 9 16:28:00 CEST 2010 - jbeulich@novell.com - -- PCI_IOMULTI=m (option changed from bool to tristate) - -------------------------------------------------------------------- -Thu Jul 15 08:24:41 UTC 2010 - bphilips@novell.com - -- X86_MRST: Disable moorsetown since it deselects SERIO_I8042 - - See 0b28bac5aef7bd1ab213723df031e61db9ff151a, fixed in -tip but we - still don't want X86_MRST - -------------------------------------------------------------------- -Wed Jul 14 13:50:16 UTC 2010 - jeffm@novell.com - -- Updated to 2.6.35-rc6: - - KEYBOARD_QT2160: Atmel AT42QT2160 Touch Sensor Chip - - Enabled as module; defaults to n - - - LEDS_CLEVO_MAIL: Mail LED on Clevo notebook - - Enabled as m; defaults to n - - - ACER_WMI: Acer WMI Laptop Extras - - Enabled as m; defaults to n - - - DELL_LAPTOP: Dell Laptop Extras - * EXPERIMENTAL - - Enabled as m; defaults to n - -------------------------------------------------------------------- -Wed Jul 14 13:50:16 UTC 2010 - bphilips@novell.com - -- CGROUPS: Enable cgroup options on -desktop to support systemd - -------------------------------------------------------------------- -Mon Jun 7 16:58:57 CEST 2010 - jeffm@suse.de - -- Updated to 2.6.35-rc2: - - EDAC_I7CORE: EDAC support for Intel i7 Core (Nehalem) processors - - Enabled as module; defaults to n - - - FB_XGI: XGI display support - * STAGING - - Enabled as module; defaults to n - - - TOUCHSCREEN_INTEL_MID: Intel MID platform resistive touchscreen - * STAGING - - Enabled as module; defaults to y - - - - -------------------------------------------------------------------- -Tue Jun 1 20:47:14 CEST 2010 - jeffm@suse.de - -- Updated to 2.6.35-rc1: - - COMPACTION: Allow for memory compaction - - Allows for defragmentation of movable memory (userspace and - reclaimable pages), allowing higher order allocations to - succeed even on long-running systems - - Reports indicate 90% allocable as huge pages with less - reclaim activity - * Performance impact investigation needed - - Enabled; defaults to n - - - ACPI_HED: Hardware Error Device - - Device used for hardware error reporting - - Enabled as modules; defaults to n - - - ACPI_APEI: ACPI Platform Error Interface - - Allows error reporting, serialization, and injection - - Enabled; defaults to n - - - ACPI_APEI_GHES: APEI Generic Hardware Error Source - - Allows use of firmware-first error reporting, allowing - the firmware to interpret errors in a manner that Linux - alone would not be able to do. - - Enabled as module; defaults to n - - - ACPI_APEI_EINJ: APEI Error Injection - - Provides an error injection mechanism for testing and debugging - - Enabled as module; defaults to n - - - INTEL_IDLE: Cpuidle Driver for Intel Processors - - cpuidle driver that includes knowledge of native Intel hardware - idle features - - Can work in tandem with ACPI_IDLE to handle processors that - this driver doesn't support. - - Enabled as module; defaults to n - - - PCI_CNB20LE_QUIRK: Read CNB20LE Host Bridge Windows - - Read the PCI windows out of the CNB20LE host bridge. - - Adding quirks seems like an easy to to support more hardware - * Could use examination by PCI expert. - - Enabled; defaults to n - - - IP_MROUTE_MULTIPLE_TABLES: IP: multicast policy routing - - Allows multicast routing to take interface and packet marks into account - - Allows multiple userspace daemons to handle routing - - Enabled; defaults to n - - - NETFILTER_XT_TARGET_TEE: TEE" - packet cloning to alternate destiantion - - Allows packets to be cloned and rerouted to another nexthop - - Enabled as module; defaults to n - - - NET_SCTPPROBE: SCTP: Association probing - - This module allows for capturing the changes to SCTP association - state in response to incoming packets. - - Used for debugging but is a module - - Enabled as module; defaults to n - - - L2TP: Layer Two Tunneling Protocol - - Allows tunneling of layer 2 traffic - - Often used as a VPN protocol or for routing many PPP connections - over IP - - Enabled as module; defaults to n - - - L2TP_DEBUGFS: L2TP debugfs support - - Export l2tp internal state to debugfs - - Recommended m - - Enabled as module; defaults to n - - - L2TP_V3: L2TPv3 support - - Experimental - - Allows tunneling of raw ethernet frames - - Enabled; defaults to n - - - L2TP_IP: L2TP IP encapsulation for L2TPv3 - - Support for L2TP-over-IP socket family. - - Allows tunneling over l2tp/ip instead of udp - - Uses IP protocol 115 - - Enabled as module; defaults to n - - - L2TP_ETH: L2TP ethernet pseudowire support for L2TPv3 - - Support for carrying raw ethernet frames over L2TPv3. - - Enabled as module; defaults to n - - - BT_L2CAP_EXT_FEATURES: L2CAP Extended Features support - - This option enables the L2CAP Extended Features support. - - Experimental - - "You should say N unless you know what you are doing." - - Disabled; defaults to n - - - CAIF: CAIF support - - Communication CPU to Application CPU Interface - - Enabled as m; defaults to n - - - CAIF_DEBUG: Enabled debug (for CAIF) - - Disabled; defaults to n - - - CAIF_NETDEV: CAIF GPRS Network device - - Required by CAIF as a module - - Enabled as module; defaults to n - - - SM_FTL: SmartMedia/xD new translation layer - - This enables new and very EXPERMENTAL support for SmartMedia/xD - - Experimental and may eat data - - Disabled; defaults to n - - - - MTD_PCMCIA: PCMCIA MTD driver - - Map driver for accessing PCMCIA linear flash memory cards. - - Enabled as module; defaults to n - - - MTD_PCMCIA_ANONYMOUS: Use PCMCIA MTD drivers for anonymous PCMCIA cards - - If this option is enabled, PCMCIA cards which do not report - anything about themselves are assumed to be MTD cards. - - Disabled; defaults to n - - - MTD_NAND_DENALI: Support Denali NAND controller on Intel Moorestown - - Enabled as module; defaults to n - - - MTD_NAND_DENALI_SCRATCH_REG_ADDR: Denali NAND size scratch register address - - Set to 0xFF108018 (default) - - - MTD_NAND_RICOH: Ricoh xD card reader - - Enable support for Ricoh R5C852 xD card reader - - Enabled as module; defaults to n - - - AD525X_DPOT_I2C: support I2C bus connection - - Enabled as module; defaults to n - - - AD525X_DPOT_SPI: support SPI bus connection - - Enabled as module; defaults to n - - - SATA_AHCI_PLATFORM: Platform AHCI SATA support - - Enabled as module; defaults to n - - - ATA_BMDMA: ATA BMDMA support - - BMDMA stands for bus-master DMA and the de-facto DMA interface for - SFF controllers. - - Enabled; defaults to y - - - LIBERTAS_THINFIRM_DEBUG: Enable full debugging output in the Libertas - thin firmware module. - - Disabled; defaults to n - - - ATH9K_HTC: Atheros HTC based wireless cards support - - Support for Atheros HTC based cards. - - Enabled as module; defaults to n - - - ATH9K_HTC_DEBUGFS: Atheros ath9k_htc debugging - - Disabled; defaults to n - - - IWM_TRACING: Enable event tracing for iwmc3200wifi - - Disabled; defaults to n - - - HERMES_PRISM: Support Prism 2/2.5 chipset - - "These chipsets are better handled by the hostap driver." - - Disabled; defaults to n - - - ORINOCO_USB: Agere Orinoco USB support - - Enabled as module; defaults to n - - - WL1271_SPI: TI wl1271 SPI support - - Enabled as module; defaults to n - - - CAIF_TTY: CAIF TTY transport driver - - Allows the tty interface to use the CAIF stack - - Enabled as module; defaults to n - - - KEYBOARD_TCA6416: TCA6416 Keypad Support - - Enabled as module; defaults to n - - - TOUCHSCREEN_HAMPSHIRE: Hampshire serial touchscreen - - Enabled as module; defaults to n - - - TOUCHSCREEN_TPS6507X: TPS6507x based touchscreens - - Enabled as module; defaults to n - - - INPUT_AD714X: Analog Devices AD714x Capacitance Touch Sensor - - Enabled as module; defaults to n - - - INPUT_AD714X_I2C: support I2C bus connection - - Enabled as module; defaults to n - - - INPUT_AD714X_SPI: support SPI bus connection - - Enabled as module; defaults to n - - - INPUT_PCF8574: PCF8574 Keypad input device - - Enabed as module; defaults to n - - - N_GSM: GSM MUX line discipline support - - This line discipline provides support for the GSM MUX protocol and - presents the mux as a set of 61 individual tty devices. - - Enabled as module; defaults to n - - - SERIAL_ALTERA_JTAGUART: Altera JTAG UART support - - Enabled as module; defaults to n - - - SERIAL_ALTERA_UART: Altera UART support - - Enabled as module; defaults to n - - - SERIAL_ALTERA_UART_MAXPORTS: Maximum number of Altera UART ports - - Set to 4 (default) - - - SERIAL_ALTERA_UART_BAUDRATE: Default baudrate for Altera UART ports - - Set to 115200 (default) - - - RAMOOPS: Log panic/oops to a RAM buffer - - This enables panic and oops messages to be logged to a circular - buffer in RAM where it can be read back at some later point. - - Enabled as module; defaults to n - - - GPIO_RDC321X: RDC R-321x GPIO support - - Enabled as module; defaults to n - - - TEST_POWER: Test power driver - - Enabled as module; defaults to n - - - SENSORS_EMC1403: SMSC EMC1403 thermal sensor - - Enabled as module; defaults to n - - - SENSORS_ADS7871: Texas Instruments ADS7871 A/D converter - - Enabled as module; defaults to n - - - SENSORS_TMP102: Texas Instruments TMP102 - - Enabled as module; defaults to n - - - MFD_SUPPORT: Multifunction device drivers - - Enabled (new option protecting old options that were enabled) - - - TPS6507X: TPS6507x Power Management / Touch Screen chips - - Enabled as module; defaults to n - - - ABX500_CORE: ST-Ericsson ABX500 Mixed Signal Circuit register functions - - No module option - - Disabled; defaults to n - - - AB8500_CORE: ST-Ericsson AB8500 Mixed Signal Power Management chip - - No module option - - Disabled; defaults to n - - - MFD_RDC321X: Support for RDC-R321x southbridge - - Enabled as module; defaults to m - - - MFD_JANZ_CMODIO: Support for Janz CMOD-IO PCI MODULbus Carrier Board - - Enabled as module; defaults to n - - - RC_MAP: Compile Remote Controller keymap modules - - Enabled as module; defaults to m - - - IR_NEC_DECODER: Enable IR raw decoder for the NEC protocol - - Enabled as module; defaults to m - - - IR_RC5_DECODER: Enable IR raw decoder for the RC-5 protocol - - Enabled as module; defaults to m - - - IR_RC6_DECODER: Enable IR raw decoder for the RC6 protocol - - Enabled as module; defaults to m - - - IR_JVC_DECODER: Enable IR raw decoder for the JVC protocol - - Enabled as module; defaults to m - - - IR_SONY_DECODER: Enable IR raw decoder for the Sony protocol - - Enabled as module; defaults to m - - - IR_IMON: SoundGraph iMON Receiver and Display - - Enabled as module; defaults to n - - - V4L_MEM2MEM_DRIVERS: Memory-to-memory multimedia devices - - Say Y here to enable selecting drivers for V4L devices that - use system memory for both source and destination buffers, as opposed - to capture and output drivers, which use memory buffers for just - one of those. - - Enabled; defaults to n - - - VIDEO_MEM2MEM_TESTDEV: Virtual test device for mem2mem framework - - This is a virtual test device for the memory-to-memory driver - - Enabled as module; defaults to n - - - FB_VIA_DIRECT_PROCFS: direct hardware access via procfs - * DEPRECATED - * DANGEROUS - - Disabled; defaults to n - - - LCD_S6E63M0: S6E63M0 AMOLED LCD Driver - - Enabled as module; defaults to n - - - BACKLIGHT_ADP8860: Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED - - Enabled as module; defaults to n - - - SND_ASIHPI: AudioScience ASIxxxx - - Enabled as module; defaults to n - - - SND_ES1968_INPUT: Enable input device for es1968 volume buttons - - Recommended y - - Enabled; defaults to n - - - SND_MAESTRO3_INPUT: Enable input device for maestro3 volume buttons - - Recommended y - - Enabled; defaults to n - - - HID_CANDO: Cando dual touch panel - - Enabled as module; defaults to n - - - HID_PRODIKEYS: Prodikeys PC-MIDI Keyboard support - - Enabled as module; defaults to n - - - HID_EGALAX: eGalax multi-touch panel - - Enabled as module; defaults to n - - - HID_PICOLCD: PicoLCD (graphic version) - - Enabled as module; defaults to n - - - HID_ROCCAT: Roccat special event support - - Enabled as module; defaults to n - - - HID_ROCCAT_KONE: Roccat Kone Mouse support - - Enabled as module; defaults to n - - - HID_WACOM_POWER_SUPPLY: Wacom Bluetooth devices power supply status support - - Enabled; defaults to n - - - HID_ZYDACRON: Zydacron remote control support - - Enabled as module; defaults to n - - - USB_SERIAL_MOS7715_PARPORT: Support for parallel port on the Moschip 7715 - - Enabled; defaults to n - - - USB_SERIAL_ZIO: ZIO Motherboard USB serial interface driver - - Enabled as module; defaults to n - - - LEDS_NET5501: LED Support for Soekris net5501 series Error LED - - Enabled as module; defaults to n - - - LEDS_MC13783: LED Support for MC13783 PMIC - - Enabled as module; defaults to n - - - INFINIBAND_CXGB4: Chelsio T4 RDMA Driver - - Enabled as module; defaults to n - - - TIMB_DMA: Timberdale FPGA DMA support - - Enabled as module; defaults to n - - - VIDEO_TM6000: TV Master TM5600/6000/6010 driver - * STAGING - - Enabled as module; defaults to n - - VIDEO_TM6000_ALSA: TV Master TM5600/6000/6010 audio support - - Enabled as module; defaults to n - - VIDEO_TM6000_DVB: Support for tm6000 based TV cards - - Enabled; defaults to n - - - COMEDI_FC: Comedi shared functions for low-level driver support - * STAGING - - Enabled as module; defaults to n - - - HYPERV_UTILS: Microsoft Hyper-V Utilities driver - * STAGING - - Enabled as module; defaults to n - - - MRST_RAR_HANDLER: RAR handler driver for Intel Moorestown platform - * STAGING - - Enabled as module; defaults to n - - - ADIS16209: Analog Devices ADIS16209 Dual-Axis Digital Inclinometer - and Accelerometer - * STAGING - - Enabled as module; defaults to n - - - ADIS16220: Analog Devices ADIS16220 Programmable Digital Vibration - Sensor driver - * STAGING - - Enabled as module; defaults to n - - - ADIS16240: Analog Devices ADIS16240 Programmable Impact Sensor and Recorder - * STAGING - - Enabled as module; defaults to n - - - ADIS16260: Analog Devices ADIS16260/5 Digital Gyroscope Sensor SPI driver - * STAGING - - Enabled as module; defaults to n - - - ADIS16300: Analog Devices ADIS16300 IMU SPI driver - * STAGING - - Enabled as module; defaults to n - - - ADIS16350: Analog Devices ADIS16350/54/55/60/62/64/65 IMU SPI driver - * STAGING - - Enabled as module; defaults to n - - - ADIS16400: Analog Devices ADIS16400/5 IMU SPI driver - * STAGING - - Enabled as module; defaults to n - - - WLAGS49_H2: Agere Systems HERMES II Wireless PC Card Model 0110 - * STAGING - - Enabled as module; defaults to n - - - WLAGS49_H25: Linksys HERMES II.5 WCF54G_Wireless-G_CompactFlash_Card - * STAGING - - Enabled as module; defaults to n - - - VIDEO_DT3155: DT3155 frame grabber, Video4Linux interface - * STAGING - - Enabled as module; defaults to n - - DT3155_CCIR: Selects CCIR/50Hz vertical refresh - - Enabled; defaults to y (European region) - - - CXT1E1: SBE wanPMC-C[421]E1T1 hardware support - * STAGING - - Enabled as module; defaults to n - - SBE_PMCC4_NCOMM: SBE PMCC4 NCOMM support - - Enabled; defaults to n - - - TI_ST: shared transport core driver - * STAGING - - Enabled as module; defaults to n - - ST_BT: BlueZ bluetooth driver for ST - - Enabled as module; defaults to n - - - ADIS16255: Analog Devices ADIS16250/16255 - * STAGING - - Enabled as module; defaults to n - - x86-specific: - - - INTEL_SCU_IPC: Intel SCU IPC Support - - IPC is used to bridge the communications between kernel and SCU on - some embedded Intel x86 platforms. This is not needed for PC-type - machines. - - Enabled; defaults to y - - - SQUASHFS_XATTRS: Squashfs XATTR support - - Enabled; defaults to n - - - CPU_NOTIFIER_ERROR_INJECT: CPU notifier error injection module - - Enabled as module; defaults to n - - - ATOMIC64_SELFTEST: Perform an atomic64_t self-test at boot - - Disabled; defaults to n - - - KGDB_LOW_LEVEL_TRAP: KGDB: Allow debugging with traps in notifiers - - Enabled; defaults to n - - - KGDB_KDB: KGDB_KDB: include kdb frontend for kgdb - - Enabled; defaults to n - - KDB_KEYBOARD: KGDB_KDB: keyboard as input device - - Enabled; defaults to n - - - CAN_JANZ_ICAN3: Janz VMOD-ICAN3 Intelligent CAN controller - - Enabled as module; defaults to n - - - GPIO_JANZ_TTL: Janz VMOD-TTL Digital IO Module - - Enabled as module; defaults to n - - - MFD_TC35892: Support Toshiba TC35892 - - Disabled; defaults to n - - - MFD_WM8994: Support Wolfson Microelectronics WM8994 - - Disabled; defaults to n - - - INFINIBAND_QIB: QLogic PCIe HCA support - - Enabled as module; defaults to n - - - ia64 and ppc: - - - NET_DMA: Network: TCP receive copy offload - - Enabled already on x86/x86_64 - - Enabled; defaults to n - - - ASYNC_TX_DMA: Async_tx: Offload support for the async_tx api - - Enabled already on x86/x86_64 - - Enabled; defaults to n - - - DMATEST: DMA Test client - - Enabled as module already on x86/x86_64 - - Enabled as module; defaults to n - - - ppc - - XILINX_LL_TEMAC: Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver - - Enabled as module; defaults to n - - - KPROBE_EVENT: Enable kprobes-based dynamic events - - Enabled on other arches - - Enabled; defaults to y - - - IMA: Integrity Measurement Architecture(IMA) - - Disabled on other arches - - Disabled; defaults to n - - - KVM_BOOK3S_32: KVM support for PowerPC book3s_32 processors - - Enabled as module; defaults to n - - - TCG_TIS: TPM Interface Specification 1.2 Interface - - Enabled as module; defaults to n - - - DEBUG_PER_CPU_MAPS: Debug access to per_cpu maps - - Disabled on x86/x86_64 - - Disabled; defaults to n - - - s390 - - VMCP: Support for the z/VM CP interface - - Enabled; defaults to n - - - sparc64 - - TCG_TIS: TPM Interface Specification 1.2 Interface - - Enabled as module; defaults to n - - - FB_TMIO: Toshiba Mobile IO FrameBuffer support - - Hardware is only found on things like the Sharp Zaurus - - Disabled; Defaults to n - -------------------------------------------------------------------- -Tue May 25 12:20:47 CEST 2010 - jbeulich@novell.com - -- XEN_DEV_EVTCHN=m for both -xen flavors (-ec2 already have this) - -------------------------------------------------------------------- -Thu May 20 21:30:17 CEST 2010 - jeffm@suse.de - -- Disabled CONFIG_RT2800PCI (bnc#606243) - - These devices are handled by the rt2860 staging driver. - -------------------------------------------------------------------- -Wed Apr 28 10:34:23 CEST 2010 - trenn@suse.de - -- Update config files. - Unify X86_MSR and X86_CPUID configs: - - CONFIG_X86_CPUID=m - - CONFIG_X86_MSR=y - for all i386 and x86_64 flavors. -- Update -ec2 config files (X86_MSR=m again). - - MSRs are more and more used by userspace on X86. Unify all configs - to =y. - On -ec2 MSR access is restricted and not that important -> =m - CPUID is not useful as it can be called in userspace as well, but - some userspace progs may still need it -> =m - -------------------------------------------------------------------- -Mon Apr 26 15:39:13 CEST 2010 - jeffm@suse.de - -- Disabled CONFIG_TUNE_CELL on ppc64 (bnc#599045) - - gcc 4.5 appears to issue invalid instructions, but even if - that is not the case or the issue is fixed, it was an optimization - for the cell processor that will most likely not be used - on most hardware. - -------------------------------------------------------------------- -Mon Apr 26 03:07:40 CEST 2010 - jeffm@suse.de - -- Enabled CONFIG_FIREWIRE (bnc#586172) - - CONFIG_IEEE1394 is still enabled but deprecated. - -------------------------------------------------------------------- -Sun Mar 21 22:54:05 CET 2010 - jeffm@suse.de - -- Updated to 2.6.34-rc2. - - USB_NET_SMSC75XX: SMSC LAN75XX based USB 2.0 gigabit ethernet devices - - Enabled as module; Defaults to n - - - LCD_L4F00242T03: Epson L4F00242T03 LCD - - Enabled as module; Defaults to n - - - LEDS_DELL_NETBOOKS: External LED on Dell Business Netbooks - - Enabled as module; Defaults to n - - - CEPH_FS: Ceph distributed file system - - Enabled as module; Defaults to n - - - CEPH_FS_PRETTYDEBUG: Include file:line in ceph debug output - - Enabled; Defaults to n - - Better debugging output at the cost of a larger module - - Only used with dynamic printk so it doesn't affect performance - -------------------------------------------------------------------- -Wed Mar 17 16:40:52 CET 2010 - jeffm@suse.de - -- Updated to 2.6.34-rc1-git6. - - PPS_CLIENT_KTIMER: Kernel timer client (Testing client, use for debug) - - Disabled; Defaults to n - - - PPS_CLIENT_LDISC: PPS line discipline - - Enabled as module; Defaults to n - - - INPUT_TWL4030_VIBRA: TWL4030 Vibrator - - Enabled as module; Defaults to n - -------------------------------------------------------------------- -Wed Mar 10 22:08:55 CET 2010 - jeffm@suse.de - -- CONFIG_DRM_RADEON_KMS: Enable modesetting on radeon by default - NEW DRIVER - - Enabled; No default - - KMS-supported X.org driver is now in Factory: - http://lists.opensuse.org/archive/opensuse-commit/2010-03/msg00252.html - -------------------------------------------------------------------- -Tue Mar 9 23:54:32 CET 2010 - jeffm@suse.de - -- Updated to 2.6.34-rc1. - x86/x86_64: - - RCU_FAST_NO_HZ: Accelerate last non-dyntick-idle CPU's grace periods - - Available on all arches, defaults to n - - Disabled except for i386/{default,desktop} and x86_64/desktop - - Provides better energy efficiency on systems without large - numbers of CPUs. - - - OPTPROBES: Kprobes jump optimization support - - Only available on x86/x86_64, defaults to y - - Feature is enabled at runtime via debug.kprobes_optimization sysctl - - - NO_BOOTMEM: Disable Bootmem code - - Only available on x86/x86_64, defaults to y - - Reduces a layer between early allocator and final allocator - - - XEN: Xen guest support - - Disabled; Defaults to n - - - PATA_LEGACY: Legacy ISA PATA support - - Disabled; Defaults to n - - ia64: - - OPROFILE: OProfile system profiling - - Enabled as module; Defaults to n - - powerpc: - - SPI_DW_MMIO: Memory-mapped io interface driver for DW SPI core - - Enabled as module; Defaults to n - - powerpc/ps3: - - LKDTM: Linux Kernel Dump Test Tool Module - - Disabled; Defaults to n - - s390: - - KERNEL_GZIP: Allow creation of bzImage with gzip compression - - - SMSGIUCV_EVENT: Deliver IUCV special messages as uevents (VM only) - - Enabled as module; Defaults to n - - - KPROBE_EVENT: Enable kprobes-based dynamic events - - Enabled; Defaults to y - - - DEBUG_STRICT_USER_COPY_CHECKS: Strict user copy size checks - - Enabled; Defaults to n - - This is a compile-time option that forces gcc to issue warnings - if there are potentially unsafe uses of copy_from_user - - - Architecture agnostic: - - - PM_ADVANCED_DEBUG: Extra PM attributes in sysfs for low-level - debugging/testing - - Available on all arches, defaults to n - - Enabled on all arches - - Acts as a guard for other options, no code difference - - - NETFILTER_XT_TARGET_CT: "CT" target support - - Enabled as module; Defaults to n - - Adds support for a connection tracking target. Used in conjuction with - zones. - - - IP_VS_PROTO_SCTP: SCTP load balancing support - - Enabled; Defaults to n - - Adds SCTP support to IPVS - - - NF_CONNTRACK_ZONES: Connection tracking zones - - Enabled; Defaults to n - - Adds zone support to connection tracking. Zones seem to be similar to - network namespaces but limited just to connection tracking so there - is much less overhead. - - - BRIDGE_IGMP_SNOOPING: IGMP snooping - - Enabled; Defaults to y - - Drivers: - - CAN_PLX_PCI: PLX90xx PCI-bridge based Cards - - Enabled as module; Defaults to n - - - MACVTAP: MAC-VLAN based tap driver - - Enabled as module; Defaults to n - - - KSZ884X_PCI: Micrel KSZ8841/2 PCI - - Enabled as module; Defaults to n - - - IXGBEVF: Intel(R) 82599 Virtual Function Ethernet support - - Enabled as module; Defaults to n - - - QLCNIC: QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support - - Enabled as module; Defaults to n - - - LIBERTAS_MESH: Enable mesh support - - Enabled; Defaults to n - - This option factored out mesh support from the driver to allow it to be - disabled. Enabling it keeps the previous functionality. - - - RT2800PCI_RT30XX: rt2800pci - Include support for rt30xx - - RT2800PCI_RT35XX: rt2800pci - Include support for rt35xx - - RT2800USB_RT30XX: rt2800usb - Include support for rt30xx - - RT2800USB_RT35XX: rt2800usb - Include support for rt35xx - - RT2800USB_UNKNOWN: rt2800usb - Include support for unknown (USB) devices - - Disabled; Defaults to n - - Support for these devices is currently not functional - - Testers may enable support for these devices via the sysfs new_id - interface, but enabling them by default would just confuse users - - - SERIAL_TIMBERDALE: Timberdale UART - - Enabled as module; Defaults to n - - - I2C_XILINX: Xilinx I2C Controller - - (Should be) Enabled as module; Defaults to n - - Temporarily disabled due to missing include - - - GPIO_IT8761E: IT8761E GPIO support - - Enabled as module; Defaults to n - - - GPIO_SCH: Intel SCH GPIO - - Enabled as module; Defaults to n - - - GPIO_MAX7300: Maxim MAX7300 GPIO expander - - Enabled as module; Defaults to n - - - SENSORS_ADT7411: Analog Devices ADT7411 - - Enabled as module; Defaults to n - - - SENSORS_ASC7621: Andigilog aSC7621 - - Enabled as module; Defaults to n - - - MAX63XX_WATCHDOG: Max63xx watchdog - - Enabled as module; Defaults to n - - - MFD_WM8994: Wolfson Microelectronics WM8994 - - Enabled as module; Defaults to n - - - MFD_TIMBERDALE: Timberdale FPGA - - Enabled as module; Defaults to n - - - LPC_SCH: Intel SCH LPC - - Enabled as module; Defaults to n - - - REGULATOR_DUMMY: Provide a dummy regulator if regulator lookups fail - - Enabled; Defaults to n - - - REGULATOR_MAX8649: Maxim 8649 voltage regulator - - Enabled as module; Defaults to n - - - REGULATOR_WM8994: Wolfson Microelectronics WM8994 CODEC - - Enabled as module; Defaults to n - - - VIDEO_CX18_ALSA: Conexant 23418 DMA audio support - - Enabled as module; Defaults to n - - - USB_GSPCA_BENQ: Benq USB Camera Driver - - Enabled as module; Defaults to n - - - USB_GSPCA_CPIA1: cpia CPiA (version 1) Camera Driver - - Enabled as module; Defaults to n - - - USB_GSPCA_OV534_9: OV534 OV965x USB Camera Driver - - Enabled as module; Defaults to n - - - USB_GSPCA_SN9C2028: SONIX Dual-Mode USB Camera Driver - - Enabled as module; Defaults to n - - - VIDEO_TLG2300: Telegent TLG2300 USB video capture support - - Enabled as module; Defaults to n - - - RADIO_SAA7706H: SAA7706H Car Radio DSP - - Enabled as module; Defaults to n - - - RADIO_TIMBERDALE: Timberdale radio driver - - Enabled as module; Defaults to n - - - DVB_USB_AZ6027: Azurewave DVB-S/S2 USB2.0 AZ6027 - - Enabled as module; Defaults to n - - - DVB_NGENE: Micronas nGene support - - Enabled as module; Defaults to n - - - VGA_ARB_MAX_GPUS: Maximum number of GPUs - - 16; Defaults to 16 - - - VGA_SWITCHEROO: Laptop Hybrid Grapics - GPU switching support - - Enabled; Defaults to n - - Allows switching between multiplexed GPUs on many laptops released - in the past few years - - - SND_JAZZ16: Media Vision Jazz16 card and compatibles - - Enabled as module only on i386/default; Defaults to n - - - SND_USB_UA101: Edirol UA-101/UA-1000 - - Enabled as module; Defaults to n - - - HID_3M_PCT: 3M PCT - - Enabled as module; Defaults to n - - - LOGIG940_FF: Logitech Flight System G940 force feedback - - Enabled; Defaults to n - - Enables support for the device within the Logitech HID module - - - HID_MAGICMOUSE: Apple MagicMouse multi-touch support - - Enabled as module; Defaults to n - - - HID_MOSART: MosArt - - Enabled as module; Defaults to n - - - HID_QUANTA: Quanta Optical Touch - - Enabled as module; Defaults to n - - - HID_STANTUM: Stantum - - Enabled as module; Defaults to n - - - USB_SERIAL_QCAUX: USB Qualcomm Auxiliary Serial Port Driver - - Enabled as module; Defaults to n - - - USB_SERIAL_VIVOPAY_SERIAL: USB ViVOpay serial interface driver - - Enabled as module; Defaults to n - - - MMC_RICOH_MMC: Ricoh MMC Controller Disabler - - Enabled; Defaults to n - - This allows users with some Ricoh-based multifunction card readers to - use their MMC cards. The multifunction device supports both SD and MMC - in hardware but Linux only has a driver for the SD portion. The SD - driver can read the MMC cards, but only if the MMC hardware is not - allowed to claim the card first. - - - DMADEVICES_DEBUG: DMA Engine debugging - - Disabled; Defaults to n - - - UIO_NETX: Hilscher NetX Card driver - - Enabled as module; Defaults to n - - - USB_IP_DEBUG_ENABLE: USB-IP Debug Enable - - Disabled; Defaults to n - - This only sets the flag to enable the debug behavior by default - - - VMIVME_7805: VMIVME-7805 - - Enabled as module; Defaults to n - - - BATMAN_ADV_DEBUG: B.A.T.M.A.N. debugging - - Enabled; Defaults to n - - This allows the debugging output but does not enable it by default. - - - DT3155: DT3155 Digitizer - - Enabled as module; Defaults to n - - - CRYSTALHD: Broadcom Crystal HD video decoder - - Enabled as module; Defaults to n - - - LOGFS: LogFS file system - - Enabled as module; Defaults to n - - - CRYPTO_PCRYPT: Parallel crypto engine - - Enabled as module; Defaults to n - - - VHOST_NET: Host kernel accelerator for virtio net - - Enabled as module; Defaults to n - - - SERIAL_UARTLITE: Xilinx uartlite serial port - - Enabled as module; Defaults to n - - - GPIO_WM8994: WM8994 GPIOs - - Enabled as module; Defaults to n - - - GPIO_TIMBERDALE: Timberdale GPIO IP - - Disabled; Defaults to n - - Should probably be available as a module - - - MFD_88PM860X: Marvell 88PM8606/88PM8607 - - Disabled; Defaults to n - - Should probably be available as a module - - - HTC_I2CPLD: HTC I2C PLD chip - - Disabled; Defaults to n - - Should probably be available as a module - - - MFD_MAX8925: Maxim Semiconductor MAX8925 PMIC - - Disabled; Defaults to n - - Should probably be available as a module - - - AB3100_CORE: ST-Ericsson AB3100 Mixed Signal Circuit core functions - - Disabled; Defaults to n - - Should probably be available as a module -