------------------------------------------------------------------- Fri Sep 30 12:11:40 UTC 2022 - Nicolas Morey-Chaisemartin - Update to v4.21.0-1 (jsc#PED-911, jsc#PED-1188) - Generic - Added support for NVIDIA ConnectX-7 adapter cards. - Added additional Flash support for ConnectX-4 Lx and ConnectX-5 adapter cards. - Python 2.x - Python 2.x is now end-of-life and no longer supported by MFT. - mstfwreset - For some configuration changes done using mstconfig, PCI rescan by the user is required. - Added a new reset-type ("NIC only reset") to mstfwreset which is applicable only to SmartNIC devices. The new reset-type is also the new default for SmartNIC devices. In case of reset-type is set to "NIC only reset", mstfwreset will not reset the internal host. - mstflint - Querying Vendor Specific Firmware Information from an Nvidia AOC / Transceiver Querying a firmware cable transceiver is now done using the "mstflint" tool. - cable/transceivers burning commands provide now validation and extract version from the image files. - Modified the output of the PCIe link information, removed the device status filed. - When downgrading to a firmware version that does not support the flash type of the device, mstflint will present the user a clear error of such scenario. - mlxconfig - Enable the users to apply token via MTUSB connected device. - mstresourceparse - mstresourceparse will present the union fields according to the selector. Unions that do not have a selector, will be presented with all the fields as before. - mstresourcedump - mstresourcedump tool now runs ~10X faster in mem mode with output to binary file. - Updated the "--virtual-hca-id" value output to be in a hexadecimal format. - Memory-Mode, data field is now transferred via memory instead of the resource-dump register. - mstlink - Removed irrelevant "eye" info fields in the output of the "show eye" command for PCIe links. - Removed the device status field from the PCIe info section. - Added support for "show_eye" command for ConnectX-7 over PCIe links. - Re-formatted the serdes Tx parameter layout in the "show_sedes_tx" command. - Added support for the PRBS test mode of Active/Optical CMIS modules. - Added support for additional configuration flags of the module control parameters. - Added support for new PRBS TX/RX patterns (--tx_prbs & --rx_prbs ). - Added new show counters for 16nm devices. To see them run the "show_counter" command. - Extended the list of the cable information received for 16nm devices when running the "show_module" command. - Extended the information collection for 7nm and 16nm devices. See "--amber_collect" flag. - Extended the list of the cable information (LOL, LOS, FSM, and module status) for CMIS when running the "show_module" command. - mstdump - Added an optional parameter of the CSV path (-c | --csv) which loads the provides the CSV from a fixed location as a DB instead of the default one. - mstprivhost - Added a new flag to query all hosts status from the embedded Arm side for Multi-host systems. - Refresh patches against latest sources: - Remove-date-time-info-from-build.patch - Fix-gcc7-and-gcc8.patch ------------------------------------------------------------------- Wed Jul 7 11:31:14 UTC 2021 - Nicolas Morey-Chaisemartin - Update to v4.17.0-1 (jsc#SLE-19261) - Anti-rollback Protection - Enabled Anti-rollback protection to prevent old vulnerable firmware versions from being flashed to the device - mstlink tool - Added support for DSFP modules - Parallel Firmware Burning (DMA Burning) - Added support for parallel firmware burning. - Refresh PIE.patch against latest sources ------------------------------------------------------------------- Tue May 25 16:58:42 UTC 2021 - Wolfgang Frisch - Link as position independent executables (bsc#1184124). - Added PIE.patch ------------------------------------------------------------------- Wed Apr 7 11:52:58 UTC 2021 - Nicolas Morey-Chaisemartin - Update to v4.16.0-2 - mstlink tool - Added support for PCIe eye grade scan - Enabled margin scan on Network links - Enabled querying the current host configuration using the "q | query" flag - mstconfig tool - fixed database - fixed several bugs - Refresh patches against latest sources: - Remove-date-time-info-from-build.patch - Fix-gcc7-and-gcc8.patch - fix-race-condition-during-install.patch ------------------------------------------------------------------- Wed Sep 23 07:55:04 UTC 2020 - Nicolas Morey-Chaisemartin - Update to v4.15.0-1 (jsc#SLE-15968) - New Supported Devices - ConnectX-6Lx adapter cards support. - BlueField-2 adapter cards support. - mstconfig tool - QOS ets configuration ConnectX-4 LX 25NIC failed when enabled VFs > 21 - Network programmability (Dynamic Flex Parse) Packet classification on eCPRI header on receive with DPDK - Improved BlueField NVMf Performance when working in 4K block size [BlueField SmartNIC] Support full virtio-net PCI device emulation + Device Hot Plug - BareMetal case GA - ConnectX-6 SHARPv2 to achieve line-rate performance - New Feature - BOOT_INTERRUPT_DIS parameter was added to mlxconfig. When TRUE, legacy interrupts should not be used for receive/transmit indication. Polling should be used instead. - mstdump tool - Fixed an issue that caused mstflint to print garbage messages. To fix the bug, the new kernel module should be recompiled and loaded - mstreg tool [software steering, ASAP^2, Connection Tracking] adding DP_HASH support - Virtual output Queuing - exposing descriptors - New Feature - Increased the registry keys the tool supports and now it exposes the full PRM. - For additional information, refer to the PRM. - mstlink tool - need mstlink to support TX SerDes set --database at Quantum and Spectrum-2 - QSFP DD + CMIS - mstlink - support for 400G - mstlink to enforce PRBS at host-management and/ or multi-host systems - mstlink - add support to configure PRBS - Read/Write SerDes Tx taps with new SLTP register - mstlink - Fix the return bad status of SLTP according to the new return values - New Feature - HDR lane rate is now supported when in Pseudorandom Binary Sequence (PRBS) mode. - New Feature - Added support for switching between NRZ/PAM4 speeds for new devices that support - HDR/200G speeds (ConnectX-6, ConnectX-6 Dx, Mellanox Quantum, Mellanox Spectrum 2). - mstfwreset tool - handling mstfwreset on SN in different modes - mstflint tool [Secure Boot][BlueField-2] EFUSE keys burn tool (Arm OS) for RSA Keys and MKEK - Support HPCC in CX6Dx - Add life cycle, secure boot, recovery indications to the flint query full command - New Feature - Enables the user to insert information manually to the flash on components such as MFG/DEV GUID/MAC when no information exists after the burn process using the command "mstflint -d \ sg \". If the information is not inserted manually, the existing GUID/MAC - information will be used instead. - New Feature - Enables the user to query the MFA2 file using a PSID. - mstresourcedump tool - MSTResoruceDump new tool: Build a dump passer tool for parsing resource dumps - Added support for "--virtual-hca-id" command. Now the tool can provide info on the virtual HCA (host channel adapter, NIC) ID. ------------------------------------------------------------------- Fri Jan 24 15:03:35 UTC 2020 - Nicolas Morey-Chaisemartin - Update to v4.13.3-2 - ConnectX-6DX adapter cards GA support. - mstflint tool - New feature - Burning MFA2 images. Enables the user to extract (i.e. unzip) 4MB images from MFA2 archive, that matches the device type and device PSIB. - New feature - Verifying MFA2 Archive. Enables the user to verify a given MFA2 archive contains the image that matches the given device. - New feature - Verifying firmware image on a device which operates in livefish mode by comparing it with an existing binary firmware file. - Added image-reactivation feature which re-assigns the image signature to the previous image (in case the new image is faulty) enabling "fwreset" functionality or to burn a new image. - mstresourcedump tool - New mstresourcedump tool added to extracts and prints data segments generated by the firmware. The dump output is used by Mellanox for debug and troubleshooting. - mstfwreset tool - Added support for Socket Direct devices in the mstfwreset tool. - Added save/restore ATS PCIE capability. - Added support for Live-Patch in ConnectX-5. - Added a new reset option (reset-type) to the reset command of mstfwreset. The user can see the supported reset-types by using the query command. - mstlink tool - New feature - Using --json flag formats the output of the tool including all options & commands in JSON format and prints it. - Added support for reading the "Link Downed Counter" and "Link Error Recovery Counter" in the mstlink utility when using InfiniBand protocol only. - Added support for HDR PCIe grades in the EYE Opening Info in the mstlink utility. - Added a new flag (show links) to define the valid PCIe links. - Displays and configures port related data at the physical layer. - mstconfig tool - Added the ATS_ENABLED TLV param. When set to TRUE, the device will support Address Translation Service (ATS). - Added the VF_VPD_ENABLE parameter to mstconfig. When set, the VPD capability is exposed to Virtual Functions. - mstarchive tool - Added support for MFA2 query using the mstarchive tool. - mstfwtrace tool - Extracts and prints trace messages generated by the firmware of 5th generation devices. This tool supports secure firmware flow only. - mstreg tool - Exposes supported access registers, and allows users to obtain information regarding the registers fields and attributes, and to set and get data with a specific register. - mstfwmanager tool - Supports listing the contents of images archive. When running this command the tool will list all firmware images within this PLDM package for each image it displays. ------------------------------------------------------------------- Thu Sep 5 14:30:48 UTC 2019 - Nicolas Morey-Chaisemartin - Update to v4.11.0-5 (bsc#1136328) - Build related changes - Disabled -Werror compiler flag - Added the option to choose local system libraries if available in the machine - Enhanced python 3 compatibility - Removed python shebangs from the scripts - Fixed multiple rpmbuild issues - Added --enable-all-static configure flag that allows compilation of static executables, when the the option is supported by the compiler - All python scripts were aligned to unix encoding - Fixed multiple builds and compilation issues - mstprivhost tool - Added mstprivhost tool to set host privilege configurations - mstflint tool - Added missing Rom info attribute for legacy FW qq query - Fixed query timeout when device is locked - Renamed former --next_boot_fw_ver to --flashed_version flag. This flag queries the flashed version. - Note that the previous flag is supported to keep compatibility. - Fixed an issue with FW upgrade on ConnectX-5 EN - mstregdup tool - Fixed segfault - mstconfig - Added new params: - mstfwtrace - Added fwtracer: in this release, this tool supports secure FW flow only - libibmad - Added support for libibmad 12 in addition to 5 - Python tools - Fixed Python wrapper to work properly in multiple OSes and multiple Python versions - Added adb generic tools - Added mstreg tool: To enable this option please use "--enable-adb-genaric-tools" flag - mstarchive - Added return values - Fixed an issue in the MFA2's header minor and subminor versions - Drop patches that were fixed upstream: - Add-armv6-and-armv7-support.patch - Add-s390-s390x-support.patch - Refresh patchest against latest sources: - Fix-gcc7-and-gcc8.patch - Remove-date-time-info-from-build.patch - fix-race-condition-during-install.patch ------------------------------------------------------------------- Fri Mar 29 07:54:57 UTC 2019 - Nicolas Morey-Chaisemartin - Add missing python helpers to the package (bsc#1103497) ------------------------------------------------------------------- Wed Feb 13 13:11:34 UTC 2019 - nmoreychaisemartin@suse.com - Update to v4.11.0-3 (bsc#1103497) - Added option to query only flashed FW version, which reduces the CPU usage during the query. To use this option you should use "--next_boot_fw_ver" flag. - Fixed issue of missing information during query. - Added support for python 3. - Added option to reduce cpu utilization with "--low_cpu" flag. - Added compatibility to 1.1.X version, in addition to previously supported 1.0.2 version. - Added support for Mellanox Quantum switch systems and ConnectX-6 Ready adapter cards. - mstarchive tool The mstarchive tool allows the user to create a file with the mfa2 extension. The new file contains several binary files of a given firmware for different adapter cards. - mstprivhost The ability to restrict the hosts from configuring the NIC. Meaning, only the Arm side will have the privilege to configure the NIC. Note: This utility is supported in BlueField devices only. - mstconfig in BlueField Enables the user to manage (grand/restrict) mlxconfig configuration privileges for BlueField Arm systems. - Refresh patchest against latest sources: - Add-armv6-and-armv7-support.patch - Add-s390-s390x-support.patch - Fix-gcc7-and-gcc8.patch - Remove-date-time-info-from-build.patch - fix-race-condition-during-install.patch - Drop Fixed-licenses-of-files.patch as it was merged upstream ------------------------------------------------------------------- Mon Nov 19 07:52:54 UTC 2018 - nmoreychaisemartin@suse.com - Add Fixed-licenses-of-files.patch from upstream that fixes license issues (bsc#1086923) ------------------------------------------------------------------- Mon Oct 15 07:35:36 UTC 2018 - nmoreychaisemartin@suse.com - Update to v4.10.0-3 (fate#325998) - Added mstcongestion - Add fix-race-condition-during-install.patch to fix install on parallel builds ------------------------------------------------------------------- Tue Jul 31 07:45:02 UTC 2018 - nmoreychaisemartin@suse.com - Update to v4.10.0-2 - mstfwreset not supported - mstflint now handles all the burn parameters when MCC is enabled and displays the secure-FW CS tokens. - mstconfig - Added the option to query partial parameters - Added the following new parameters: FLEX_PARSER_PROFILE_ENABLE ECPF_ESWITCH_MANAGER ECPF_PAGE_SUPPLIER SAFE_MODE_ENABLE SAFE_MODE_THERSHOLD BOOT_UNDI_NETWORK_WAIT - Fixed bug in firmware burning flow - Refresh patchest against latest sources: - Remove-date-time-info-from-build.patch - Add-s390-s390x-support.patch - Add-armv6-and-armv7-support.patch - Fix-gcc7-and-gcc8.patch ------------------------------------------------------------------- Mon Jun 18 06:31:30 UTC 2018 - nmoreychaisemartin@suse.com - Update patches to fit science:HPC worflow - Remove old format patches - mstflint-4.4.0-implicit-declaration.patch - mstflint-4.4.0-no-date-time.patch - mstflint-armv6_arch.patch - mstflint-armv7_arch.patch - mstflint-gcc7.patch - mstflint-s390_arch.patch - Replaced with new format patches - Remove-date-time-info-from-build.patch - Add-s390-s390x-support.patch - Add-armv6-and-armv7-support.patch - Fix-gcc7-and-gcc8.patch - Patch was updated to also fix Gcc8 compilation issues - Drop obsolete patch - mstfint-mtcr_ul_no_static_lib.patch - Update to v4.9.0-3 - No release notes available ------------------------------------------------------------------- Sun Mar 25 11:17:55 UTC 2018 - kasimir_@outlook.de - Add mstflint-armv6_arch.patch to support build on armv6l ------------------------------------------------------------------- Tue Mar 20 07:44:34 UTC 2018 - nmoreychaisemartin@suse.com - Update to v4.9.0-1 * mstfwreset * Added support for a hot swap (or hot plug) of the PCIe slot. * Secure Firmware Update * Added support for Secure Firmware Update to ConnectX-4 adapter cards. * Enabled signing the package with an RSA 4096 bit keys. * Added support for setting the GUIDs when Secure Firmware Update is enabled. * mstconfig * Added the following mstconfig configuration parameters: * AUTO_RELOAD * DRIVER_SETTINGS * EXP_ROM_PXE_ENABLE * EXP_ROM_UEFI_ARM_ENABLE * EXP_ROM_UEFI_X86_ENABLE * INTERNAL_CPU_MODEL * IPV4 * IPV6 * PCI_DATA_WR_ORDERING_MODE * PXE_UNDI * STATUS_UPDATE * TCP * TCPIP * TRACER_ENABLE * mstflint * Added support for FreeBSD with BSD license. * Secure Boot * Added support for secure boot to ConnectX-3 adapter cards. ------------------------------------------------------------------- Thu Nov 9 11:19:43 UTC 2017 - nmoreychaisemartin@suse.com - Update to v4.8.0-2 * Drop proprietary Mellanox file ------------------------------------------------------------------- Tue Oct 31 12:32:47 UTC 2017 - nmoreychaisemartin@suse.com - Update to v4.8.0-1, No info of changes available (bsc#1046293, fate#322949) - Update mstflint-gcc7.patch to the latest sources ------------------------------------------------------------------- Wed Aug 9 15:36:35 UTC 2017 - nmoreychaisemartin@suse.com - Update to v4.7.0-1, No info of changes available ------------------------------------------------------------------- Fri Jun 23 15:40:51 UTC 2017 - nmoreychaisemartin@suse.com - Replace dependency from libibmad-devel to infiniband-diags-devel ------------------------------------------------------------------- Tue May 30 12:21:38 UTC 2017 - nmoreychaisemartin@suse.com - Add mstflint-gcc7.patch for GCC7 support ------------------------------------------------------------------- Thu May 18 05:54:00 UTC 2017 - nmoreychaisemartin@suse.com - Add mstflint-armv7_arch.patch to support build on armv7l - Adapt mstflint-s390_arch.patch to work with s390 and s390x ------------------------------------------------------------------- Fri Mar 31 11:21:24 UTC 2017 - nmoreychaisemartin@suse.com - Update to v4.6.0-1, No info of changes available (fate#321683). - Adapt patches to changed sources. - Support build outside of SCM. ------------------------------------------------------------------- Mon Mar 20 12:04:43 CET 2017 - pth@suse.de - Update to 4.5.0-1.17.g8a0c39d, No info of changes available (fate#321683). - Adapt mstflint-s390_arch.patch to changed sources. - Remove mstflint-4.4.0-gcc6.patch as it isn't needed anymore. ------------------------------------------------------------------- Wed Jun 29 17:36:04 UTC 2016 - i@marguerite.su - update version 4.4.0 - drop patch: mstflint-autotools.patch, not needed - drop patch: mstflint-no_Werror.patch, not needed - add patch: mstflint-4.4.0-gcc6.patch * fix boo#985145 * fix unable to find string literal operator - add patch: mstflint-4.4.0-implicit-declaration.patch * fix implicit declaration of mset_cr_access * neither mset_cr_access or MST_MLNXOS exists - add patch: mstflint-4.4.0-no-date-time.patch * fix file-contains-date-and-time ------------------------------------------------------------------- Mon Feb 22 10:35:49 CET 2016 - pth@suse.de - Add mstflint-common_int_handling.patch to fix integer types handling and use common code instead of duplication. This creates two new headers, int_handling.h and tools_arch.h. The former has the type and print formatting code common to all files. - Use date and time of .changes file to avoid useless rebuilds. ------------------------------------------------------------------- Thu Feb 18 14:39:47 CET 2016 - pth@suse.de - Update to 4.3.0 git 9b9af70 (fate#320235 bsc#66196). - Remove mstflint-autotools.patch as it's not needed anymore. - Generate ChangeLog from git log and include it. - Refresh and fix mstflint-s390_arch.patch to apply cleanly. - Build with Checksums enabled. - Add placeholder man pages from Debian. ------------------------------------------------------------------- Sun Mar 8 10:46:01 UTC 2015 - p.drouand@gmail.com - Update to version 4.0.0 * No changelog available - Use download Url as source - Update mstflint-autotools.patch ------------------------------------------------------------------- Fri Aug 8 19:27:26 CEST 2014 - pth@suse.de - Rename mstfint-mtcr_ul_no_static_lib to mstfint-mtcr_ul_no_static_lib.patch and include the patch for building and using a dynamic library as a source. ------------------------------------------------------------------- Thu Jul 24 16:42:27 CEST 2014 - pth@suse.de - Don't install header and library and thus the devel package can be removed. ------------------------------------------------------------------- Tue Jun 3 11:24:34 CEST 2014 - pth@suse.de - Update to OFED 3.12 final. ------------------------------------------------------------------- Fri May 16 13:50:49 CEST 2014 - pth@suse.de - Fix mstflint-s390_arch.patch to cover all new cases where architecture is checked. - Add mstflint-no_Werror.patch because currently there are warnings where printf formats don't match passed vars. ------------------------------------------------------------------- Wed May 14 04:19:49 CEST 2014 - pth@suse.de - Update to 3.6.0 from OFED 3.12 RC2. - Remove patches as the code was fixed upstream: mstflint-fix_type-punning.patch aarch64-arch-detection.diff - Adapt mstflint-s390_arch.patch to the new code. - Remove mstflint-shared_lib.patch as it causes more work with few gains. ------------------------------------------------------------------- Tue Apr 22 16:22:50 CEST 2014 - pth@suse.de - Add all defines needed for s390. ------------------------------------------------------------------- Tue Mar 4 12:52:48 CET 2014 - pth@suse.de - Fix mstflint-s390_arch.patch so that it applies. ------------------------------------------------------------------- Mon Mar 3 17:25:46 CET 2014 - pth@suse.de - Add all necessary defines or s390x (mstflint-s390_arch.patch). ------------------------------------------------------------------- Mon Feb 10 20:35:40 UTC 2014 - dmueller@suse.com - add aarch64-arch-detection.diff: Fix aarch64 detection ------------------------------------------------------------------- Mon Feb 3 13:23:02 CET 2014 - pth@suse.de - Update to latest 3.5.0. No change log in package. - Specify full source URL. - Use spdx.org format for license specification - Add mstflint-autotools.patch that modifies configure.ac so that autoreconf can run successfully. - Remove configure.in as configure.ac is present. - Create devel subpackage. - Add mstflint-fix_type-punning.patch that fixes all cases of type-punning by using memcpy. - Add COPYING and LICENSE to documentation. ------------------------------------------------------------------- Fri Dec 7 19:19:48 CET 2012 - pth@suse.de - Update to from OFED 1.5.4.1 (fate#314255) - Remove patches that were integrated: mstflint-includefix.patch mstflint-1.4-0.6.g63179f4-connectX3.diff ------------------------------------------------------------------- Tue Jan 10 10:21:38 UTC 2012 - stefan.fent@suse.com - Add Connect X3 support (bnc #732326) ------------------------------------------------------------------- Thu Oct 28 16:37:49 UTC 2010 - jjolly@novell.com - Update to v1.4--0.6.g63179f4 from OFED 1.5.2 - Refreshed include error patch ------------------------------------------------------------------- Thu Dec 11 22:52:53 CET 2008 - jjolly@suse.de - Updated to package from OFED 1.4 GA - Added hca_self_test.ofed installation ------------------------------------------------------------------- Tue Oct 28 08:23:16 CET 2008 - jjolly@suse.de - Updated to v1.4 from OFED 1.3 rc3 ------------------------------------------------------------------- Mon Oct 27 23:07:12 CET 2008 - ro@suse.de - fix build ------------------------------------------------------------------- Fri Sep 12 08:37:19 CEST 2008 - jjolly@suse.de - Updated to v1.3 from OFED 1.4 RC1 ------------------------------------------------------------------- Tue Aug 7 12:16:05 CEST 2007 - hvogel@suse.de - Update to version from OFED 1.2c ------------------------------------------------------------------- Thu Jul 12 14:39:12 CEST 2007 - hvogel@suse.de - package include/mtcr.h ------------------------------------------------------------------- Wed Jul 4 12:04:03 CEST 2007 - hvogel@suse.de - Add GPL COPYING file [#288876] ------------------------------------------------------------------- Tue Jul 3 13:33:43 CEST 2007 - hvogel@suse.de - Use correct git checkout from OFED 1.2 ------------------------------------------------------------------- Wed Jun 20 17:40:25 CEST 2007 - hvogel@suse.de - Initial Package, Version 1.2