rpm/mstflint
SHA256
1
0
Fork 0
forked from pool/mstflint
Code Pull Requests Activity
fe060ecc55
mstflint/mstflint.changes
Nicolas Morey-Chaisemartin fe060ecc55 Accepting request 839558 from home:NMoreyChaisemartin:branches:science:HPC 
- Update to v4.15.0-1 (jsc#SLE-15968)
  - New Supported Devices
    - ConnectX-6Lx adapter cards support.
    - BlueField-2 adapter cards support.
  - mstconfig tool
    - QOS ets configuration ConnectX-4 LX 25NIC failed when enabled VFs > 21
    - Network programmability (Dynamic Flex Parse) Packet classification on
      eCPRI header on receive with DPDK
    - Improved BlueField NVMf Performance when working in 4K block size
        [BlueField SmartNIC] Support full virtio-net PCI device emulation +
		Device Hot Plug - BareMetal case GA
    - ConnectX-6 SHARPv2 to achieve line-rate performance
    - New Feature - BOOT_INTERRUPT_DIS parameter was added to mlxconfig.
      When TRUE, legacy interrupts should not be used for receive/transmit indication.
      Polling should be used instead.
  - mstdump tool
    - Fixed an issue that caused mstflint to print garbage messages.
      To fix the bug, the new kernel module should be recompiled and loaded
  - mstreg tool
        [software steering, ASAP^2, Connection Tracking] adding DP_HASH support
    - Virtual output Queuing - exposing descriptors
    - New Feature - Increased the registry keys the tool supports and now it exposes the full PRM.
    - For additional information, refer to the PRM.
  - mstlink tool
    - need mstlink to support TX SerDes set --database at Quantum and Spectrum-2
    - QSFP DD + CMIS
    - mstlink - support for 400G
    - mstlink to enforce PRBS at host-management and/ or multi-host systems
    - mstlink - add support to configure PRBS
    - Read/Write SerDes Tx taps with new SLTP register - mstlink
    - Fix the return bad status of SLTP according to the new return values
    - New Feature - HDR lane rate is now supported when in Pseudorandom Binary Sequence (PRBS) mode.
    - New Feature - Added support for switching between NRZ/PAM4 speeds for new devices that support
    - HDR/200G speeds (ConnectX-6, ConnectX-6 Dx, Mellanox Quantum, Mellanox Spectrum 2).
  - mstfwreset tool
    - handling mstfwreset on SN in different modes
  - mstflint tool
        [Secure Boot][BlueField-2] EFUSE keys burn tool (Arm OS) for RSA Keys and MKEK
    - Support HPCC in CX6Dx
    - Add life cycle, secure boot, recovery indications to the flint query full command
    - New Feature - Enables the user to insert information manually to the flash on components
      such as MFG/DEV GUID/MAC when no information exists after the burn process using the command
        "mstflint -d \<device\> sg \<guid\>".
      If the information is not inserted manually, the existing GUID/MAC
    - information will be used instead.
    - New Feature - Enables the user to query the MFA2 file using a PSID.
  - mstresourcedump tool
    - MSTResoruceDump new tool: Build a dump passer tool for parsing resource dumps
    - Added support for "--virtual-hca-id" command. Now the tool can provide info on the virtual HCA
        (host channel adapter, NIC) ID.

OBS-URL: https://build.opensuse.org/request/show/839558
OBS-URL: https://build.opensuse.org/package/show/science:HPC/mstflint?expand=0&rev=39
2020-10-05 13:29:34 +00:00

506 lines
20 KiB
Plaintext
Raw Blame History

-------------------------------------------------------------------
Wed Sep 23 07:55:04 UTC 2020 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Update to v4.15.0-1 (jsc#SLE-15968)
- New Supported Devices
- ConnectX-6Lx adapter cards support.
- BlueField-2 adapter cards support.
- mstconfig tool
- QOS ets configuration ConnectX-4 LX 25NIC failed when enabled VFs > 21
- Network programmability (Dynamic Flex Parse) Packet classification on
eCPRI header on receive with DPDK
- Improved BlueField NVMf Performance when working in 4K block size
[BlueField SmartNIC] Support full virtio-net PCI device emulation +
Device Hot Plug - BareMetal case GA
- ConnectX-6 SHARPv2 to achieve line-rate performance
- New Feature - BOOT_INTERRUPT_DIS parameter was added to mlxconfig.
When TRUE, legacy interrupts should not be used for receive/transmit indication.
Polling should be used instead.
- mstdump tool
- Fixed an issue that caused mstflint to print garbage messages.
To fix the bug, the new kernel module should be recompiled and loaded
- mstreg tool
[software steering, ASAP^2, Connection Tracking] adding DP_HASH support
- Virtual output Queuing - exposing descriptors
- New Feature - Increased the registry keys the tool supports and now it exposes the full PRM.
- For additional information, refer to the PRM.
- mstlink tool
- need mstlink to support TX SerDes set --database at Quantum and Spectrum-2
- QSFP DD + CMIS
- mstlink - support for 400G
- mstlink to enforce PRBS at host-management and/ or multi-host systems
- mstlink - add support to configure PRBS
- Read/Write SerDes Tx taps with new SLTP register - mstlink
- Fix the return bad status of SLTP according to the new return values
- New Feature - HDR lane rate is now supported when in Pseudorandom Binary Sequence (PRBS) mode.
- New Feature - Added support for switching between NRZ/PAM4 speeds for new devices that support
- HDR/200G speeds (ConnectX-6, ConnectX-6 Dx, Mellanox Quantum, Mellanox Spectrum 2).
- mstfwreset tool
- handling mstfwreset on SN in different modes
- mstflint tool
[Secure Boot][BlueField-2] EFUSE keys burn tool (Arm OS) for RSA Keys and MKEK
- Support HPCC in CX6Dx
- Add life cycle, secure boot, recovery indications to the flint query full command
- New Feature - Enables the user to insert information manually to the flash on components
such as MFG/DEV GUID/MAC when no information exists after the burn process using the command
"mstflint -d \<device\> sg \<guid\>".
If the information is not inserted manually, the existing GUID/MAC
- information will be used instead.
- New Feature - Enables the user to query the MFA2 file using a PSID.
- mstresourcedump tool
- MSTResoruceDump new tool: Build a dump passer tool for parsing resource dumps
- Added support for "--virtual-hca-id" command. Now the tool can provide info on the virtual HCA
(host channel adapter, NIC) ID.
-------------------------------------------------------------------
Fri Jan 24 15:03:35 UTC 2020 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Update to v4.13.3-2
- ConnectX-6DX adapter cards GA support.
- mstflint tool
- New feature - Burning MFA2 images. Enables the user to extract (i.e. unzip)
4MB images from MFA2 archive, that matches the device type and device PSIB.
- New feature - Verifying MFA2 Archive. Enables the user to verify a given MFA2
archive contains the image that matches the given device.
- New feature - Verifying firmware image on a device which operates in livefish mode by
comparing it with an existing binary firmware file.
- Added image-reactivation feature which re-assigns the image signature to the
previous image (in case the new image is faulty) enabling "fwreset" functionality
or to burn a new image.
- mstresourcedump tool
- New mstresourcedump tool added to extracts and prints data segments generated
by the firmware. The dump output is used by Mellanox for debug and troubleshooting.
- mstfwreset tool
- Added support for Socket Direct devices in the mstfwreset tool.
- Added save/restore ATS PCIE capability.
- Added support for Live-Patch in ConnectX-5.
- Added a new reset option (reset-type) to the reset command of mstfwreset.
The user can see the supported reset-types by using the query command.
- mstlink tool
- New feature - Using --json flag formats the output of the tool including all
options & commands in JSON format and prints it.
- Added support for reading the "Link Downed Counter" and "Link Error Recovery Counter"
in the mstlink utility when using InfiniBand protocol only.
- Added support for HDR PCIe grades in the EYE Opening Info in the mstlink utility.
- Added a new flag (show links) to define the valid PCIe links.
- Displays and configures port related data at the physical layer.
- mstconfig tool
- Added the ATS_ENABLED TLV param. When set to TRUE, the device will support Address
Translation Service (ATS).
- Added the VF_VPD_ENABLE parameter to mstconfig. When set, the VPD capability
is exposed to Virtual Functions.
- mstarchive tool
- Added support for MFA2 query using the mstarchive tool.
- mstfwtrace tool
- Extracts and prints trace messages generated by the firmware of 5th generation devices.
This tool supports secure firmware flow only.
- mstreg tool
- Exposes supported access registers, and allows users to obtain information
regarding the registers fields and attributes, and to set and get data with
a specific register.
- mstfwmanager tool
- Supports listing the contents of images archive. When running this command the tool
will list all firmware images within this PLDM package for each image it displays.
-------------------------------------------------------------------
Thu Sep 5 14:30:48 UTC 2019 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Update to v4.11.0-5 (bsc#1136328)
- Build related changes
- Disabled -Werror compiler flag
- Added the option to choose local system libraries if available in the machine
- Enhanced python 3 compatibility
- Removed python shebangs from the scripts
- Fixed multiple rpmbuild issues
- Added --enable-all-static configure flag that allows compilation of static executables, when the the option is supported by the compiler
- All python scripts were aligned to unix encoding
- Fixed multiple builds and compilation issues
- mstprivhost tool
- Added mstprivhost tool to set host privilege configurations
- mstflint tool
- Added missing Rom info attribute for legacy FW qq query
- Fixed query timeout when device is locked
- Renamed former --next_boot_fw_ver to --flashed_version flag. This flag queries the flashed version.
- Note that the previous flag is supported to keep compatibility.
- Fixed an issue with FW upgrade on ConnectX-5 EN
- mstregdup tool
- Fixed segfault
- mstconfig
- Added new params:
- mstfwtrace
- Added fwtracer: in this release, this tool supports secure FW flow only
- libibmad
- Added support for libibmad 12 in addition to 5
- Python tools
- Fixed Python wrapper to work properly in multiple OSes and multiple Python versions
- Added adb generic tools
- Added mstreg tool: To enable this option please use "--enable-adb-genaric-tools" flag
- mstarchive
- Added return values
- Fixed an issue in the MFA2's header minor and subminor versions
- Drop patches that were fixed upstream:
- Add-armv6-and-armv7-support.patch
- Add-s390-s390x-support.patch
- Refresh patchest against latest sources:
- Fix-gcc7-and-gcc8.patch
- Remove-date-time-info-from-build.patch
- fix-race-condition-during-install.patch
-------------------------------------------------------------------
Fri Mar 29 07:54:57 UTC 2019 - Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
- Add missing python helpers to the package (bsc#1103497)
-------------------------------------------------------------------
Wed Feb 13 13:11:34 UTC 2019 - nmoreychaisemartin@suse.com
- Update to v4.11.0-3 (bsc#1103497)
- Added option to query only flashed FW version, which reduces the CPU usage during the query.
To use this option you should use "--next_boot_fw_ver" flag.
- Fixed issue of missing information during query.
- Added support for python 3.
- Added option to reduce cpu utilization with "--low_cpu" flag.
- Added compatibility to 1.1.X version, in addition to previously supported 1.0.2 version.
- Added support for Mellanox Quantum switch systems and
ConnectX-6 Ready adapter cards.
- mstarchive tool
The mstarchive tool allows the user to create a file with the mfa2 extension.
The new file contains several binary files of a given firmware for
different adapter cards.
- mstprivhost
The ability to restrict the hosts from configuring the NIC.
Meaning, only the Arm side will have the privilege to configure the NIC.
Note: This utility is supported in BlueField devices only.
- mstconfig in BlueField
Enables the user to manage (grand/restrict) mlxconfig configuration
privileges for BlueField Arm systems.
- Refresh patchest against latest sources:
- Add-armv6-and-armv7-support.patch
- Add-s390-s390x-support.patch
- Fix-gcc7-and-gcc8.patch
- Remove-date-time-info-from-build.patch
- fix-race-condition-during-install.patch
- Drop Fixed-licenses-of-files.patch as it was merged upstream
-------------------------------------------------------------------
Mon Nov 19 07:52:54 UTC 2018 - nmoreychaisemartin@suse.com
- Add Fixed-licenses-of-files.patch from upstream that
fixes license issues (bsc#1086923)
-------------------------------------------------------------------
Mon Oct 15 07:35:36 UTC 2018 - nmoreychaisemartin@suse.com
- Update to v4.10.0-3 (fate#325998)
- Added mstcongestion
- Add fix-race-condition-during-install.patch
to fix install on parallel builds
-------------------------------------------------------------------
Tue Jul 31 07:45:02 UTC 2018 - nmoreychaisemartin@suse.com
- Update to v4.10.0-2
- mstfwreset not supported
- mstflint now handles all the burn parameters when MCC
is enabled and displays the secure-FW CS tokens.
- mstconfig
- Added the option to query partial parameters
- Added the following new parameters:
FLEX_PARSER_PROFILE_ENABLE
ECPF_ESWITCH_MANAGER
ECPF_PAGE_SUPPLIER
SAFE_MODE_ENABLE
SAFE_MODE_THERSHOLD
BOOT_UNDI_NETWORK_WAIT
- Fixed bug in firmware burning flow
- Refresh patchest against latest sources:
- Remove-date-time-info-from-build.patch
- Add-s390-s390x-support.patch
- Add-armv6-and-armv7-support.patch
- Fix-gcc7-and-gcc8.patch
-------------------------------------------------------------------
Mon Jun 18 06:31:30 UTC 2018 - nmoreychaisemartin@suse.com
- Update patches to fit science:HPC worflow
- Remove old format patches
- mstflint-4.4.0-implicit-declaration.patch
- mstflint-4.4.0-no-date-time.patch
- mstflint-armv6_arch.patch
- mstflint-armv7_arch.patch
- mstflint-gcc7.patch
- mstflint-s390_arch.patch
- Replaced with new format patches
- Remove-date-time-info-from-build.patch
- Add-s390-s390x-support.patch
- Add-armv6-and-armv7-support.patch
- Fix-gcc7-and-gcc8.patch
- Patch was updated to also fix Gcc8 compilation issues
- Drop obsolete patch
- mstfint-mtcr_ul_no_static_lib.patch
- Update to v4.9.0-3
- No release notes available
-------------------------------------------------------------------
Sun Mar 25 11:17:55 UTC 2018 - kasimir_@outlook.de
- Add mstflint-armv6_arch.patch to support build on armv6l
-------------------------------------------------------------------
Tue Mar 20 07:44:34 UTC 2018 - nmoreychaisemartin@suse.com
- Update to v4.9.0-1
* mstfwreset
* Added support for a hot swap (or hot plug) of the PCIe slot.
* Secure Firmware Update
* Added support for Secure Firmware Update to ConnectX-4 adapter cards.
* Enabled signing the package with an RSA 4096 bit keys.
* Added support for setting the GUIDs when Secure Firmware Update is enabled.
* mstconfig
* Added the following mstconfig configuration parameters:
* AUTO_RELOAD
* DRIVER_SETTINGS
* EXP_ROM_PXE_ENABLE
* EXP_ROM_UEFI_ARM_ENABLE
* EXP_ROM_UEFI_X86_ENABLE
* INTERNAL_CPU_MODEL
* IPV4
* IPV6
* PCI_DATA_WR_ORDERING_MODE
* PXE_UNDI
* STATUS_UPDATE
* TCP
* TCPIP
* TRACER_ENABLE
* mstflint
* Added support for FreeBSD with BSD license.
* Secure Boot
* Added support for secure boot to ConnectX-3 adapter cards.
-------------------------------------------------------------------
Thu Nov 9 11:19:43 UTC 2017 - nmoreychaisemartin@suse.com
- Update to v4.8.0-2
* Drop proprietary Mellanox file
-------------------------------------------------------------------
Tue Oct 31 12:32:47 UTC 2017 - nmoreychaisemartin@suse.com
- Update to v4.8.0-1, No info of changes available (bsc#1046293, fate#322949)
- Update mstflint-gcc7.patch to the latest sources
-------------------------------------------------------------------
Wed Aug 9 15:36:35 UTC 2017 - nmoreychaisemartin@suse.com
- Update to v4.7.0-1, No info of changes available
-------------------------------------------------------------------
Fri Jun 23 15:40:51 UTC 2017 - nmoreychaisemartin@suse.com
- Replace dependency from libibmad-devel to infiniband-diags-devel
-------------------------------------------------------------------
Tue May 30 12:21:38 UTC 2017 - nmoreychaisemartin@suse.com
- Add mstflint-gcc7.patch for GCC7 support
-------------------------------------------------------------------
Thu May 18 05:54:00 UTC 2017 - nmoreychaisemartin@suse.com
- Add mstflint-armv7_arch.patch to support build on armv7l
- Adapt mstflint-s390_arch.patch to work with s390 and s390x
-------------------------------------------------------------------
Fri Mar 31 11:21:24 UTC 2017 - nmoreychaisemartin@suse.com
- Update to v4.6.0-1, No info of changes available (fate#321683).
- Adapt patches to changed sources.
- Support build outside of SCM.
-------------------------------------------------------------------
Mon Mar 20 12:04:43 CET 2017 - pth@suse.de
- Update to 4.5.0-1.17.g8a0c39d, No info of changes available
(fate#321683).
- Adapt mstflint-s390_arch.patch to changed sources.
- Remove mstflint-4.4.0-gcc6.patch as it isn't needed anymore.
-------------------------------------------------------------------
Wed Jun 29 17:36:04 UTC 2016 - i@marguerite.su
- update version 4.4.0
- drop patch: mstflint-autotools.patch, not needed
- drop patch: mstflint-no_Werror.patch, not needed
- add patch: mstflint-4.4.0-gcc6.patch
* fix boo#985145
* fix unable to find string literal operator
- add patch: mstflint-4.4.0-implicit-declaration.patch
* fix implicit declaration of mset_cr_access
* neither mset_cr_access or MST_MLNXOS exists
- add patch: mstflint-4.4.0-no-date-time.patch
* fix file-contains-date-and-time
-------------------------------------------------------------------
Mon Feb 22 10:35:49 CET 2016 - pth@suse.de
- Add mstflint-common_int_handling.patch to fix integer types handling
and use common code instead of duplication. This creates two new
headers, int_handling.h and tools_arch.h. The former has the type
and print formatting code common to all files.
- Use date and time of .changes file to avoid useless rebuilds.
-------------------------------------------------------------------
Thu Feb 18 14:39:47 CET 2016 - pth@suse.de
- Update to 4.3.0 git 9b9af70 (fate#320235 bsc#66196).
- Remove mstflint-autotools.patch as it's not needed anymore.
- Generate ChangeLog from git log and include it.
- Refresh and fix mstflint-s390_arch.patch to apply cleanly.
- Build with Checksums enabled.
- Add placeholder man pages from Debian.
-------------------------------------------------------------------
Sun Mar 8 10:46:01 UTC 2015 - p.drouand@gmail.com
- Update to version 4.0.0
* No changelog available
- Use download Url as source
- Update mstflint-autotools.patch
-------------------------------------------------------------------
Fri Aug 8 19:27:26 CEST 2014 - pth@suse.de
- Rename mstfint-mtcr_ul_no_static_lib to mstfint-mtcr_ul_no_static_lib.patch
and include the patch for building and using a dynamic library
as a source.
-------------------------------------------------------------------
Thu Jul 24 16:42:27 CEST 2014 - pth@suse.de
- Don't install header and library and thus the devel package can
be removed.
-------------------------------------------------------------------
Tue Jun 3 11:24:34 CEST 2014 - pth@suse.de
- Update to OFED 3.12 final.
-------------------------------------------------------------------
Fri May 16 13:50:49 CEST 2014 - pth@suse.de
- Fix mstflint-s390_arch.patch to cover all new cases where
architecture is checked.
- Add mstflint-no_Werror.patch because currently there are
warnings where printf formats don't match passed vars.
-------------------------------------------------------------------
Wed May 14 04:19:49 CEST 2014 - pth@suse.de
- Update to 3.6.0 from OFED 3.12 RC2.
- Remove patches as the code was fixed upstream:
mstflint-fix_type-punning.patch
aarch64-arch-detection.diff
- Adapt mstflint-s390_arch.patch to the new code.
- Remove mstflint-shared_lib.patch as it causes more work with
few gains.
-------------------------------------------------------------------
Tue Apr 22 16:22:50 CEST 2014 - pth@suse.de
- Add all defines needed for s390.
-------------------------------------------------------------------
Tue Mar 4 12:52:48 CET 2014 - pth@suse.de
- Fix mstflint-s390_arch.patch so that it applies.
-------------------------------------------------------------------
Mon Mar 3 17:25:46 CET 2014 - pth@suse.de
- Add all necessary defines or s390x (mstflint-s390_arch.patch).
-------------------------------------------------------------------
Mon Feb 10 20:35:40 UTC 2014 - dmueller@suse.com
- add aarch64-arch-detection.diff: Fix aarch64 detection
-------------------------------------------------------------------
Mon Feb 3 13:23:02 CET 2014 - pth@suse.de
- Update to latest 3.5.0. No change log in package.
- Specify full source URL.
- Use spdx.org format for license specification
- Add mstflint-autotools.patch that modifies configure.ac so
that autoreconf can run successfully.
- Remove configure.in as configure.ac is present.
- Create devel subpackage.
- Add mstflint-fix_type-punning.patch that fixes all cases of
type-punning by using memcpy.
- Add COPYING and LICENSE to documentation.
-------------------------------------------------------------------
Fri Dec 7 19:19:48 CET 2012 - pth@suse.de
- Update to from OFED 1.5.4.1 (fate#314255)
- Remove patches that were integrated:
mstflint-includefix.patch
mstflint-1.4-0.6.g63179f4-connectX3.diff
-------------------------------------------------------------------
Tue Jan 10 10:21:38 UTC 2012 - stefan.fent@suse.com
- Add Connect X3 support (bnc #732326)
-------------------------------------------------------------------
Thu Oct 28 16:37:49 UTC 2010 - jjolly@novell.com
- Update to v1.4--0.6.g63179f4 from OFED 1.5.2
- Refreshed include error patch
-------------------------------------------------------------------
Thu Dec 11 22:52:53 CET 2008 - jjolly@suse.de
- Updated to package from OFED 1.4 GA
- Added hca_self_test.ofed installation
-------------------------------------------------------------------
Tue Oct 28 08:23:16 CET 2008 - jjolly@suse.de
- Updated to v1.4 from OFED 1.3 rc3
-------------------------------------------------------------------
Mon Oct 27 23:07:12 CET 2008 - ro@suse.de
- fix build
-------------------------------------------------------------------
Fri Sep 12 08:37:19 CEST 2008 - jjolly@suse.de
- Updated to v1.3 from OFED 1.4 RC1
-------------------------------------------------------------------
Tue Aug 7 12:16:05 CEST 2007 - hvogel@suse.de
- Update to version from OFED 1.2c
-------------------------------------------------------------------
Thu Jul 12 14:39:12 CEST 2007 - hvogel@suse.de
- package include/mtcr.h
-------------------------------------------------------------------
Wed Jul 4 12:04:03 CEST 2007 - hvogel@suse.de
- Add GPL COPYING file [#288876]
-------------------------------------------------------------------
Tue Jul 3 13:33:43 CEST 2007 - hvogel@suse.de
- Use correct git checkout from OFED 1.2
-------------------------------------------------------------------
Wed Jun 20 17:40:25 CEST 2007 - hvogel@suse.de
- Initial Package, Version 1.2
View Git Blame Copy Permalink