rpm/multipath-tools
SHA256
1
0
Fork 0
forked from pool/multipath-tools
Code Pull Requests Activity
64cb7e0332
multipath-tools/multipath-tools.changes
Marcus Meissner 64cb7e0332 Accepting request 242290 from home:hreinecke:branches:Base:System 
- Patches from upstream:
  * enable gcc format-security check
  * Accept "*" as a valid regular expression
  * check info.exists to get valid value
  * Don't forget to reload table when both reload and rename
    is required
  * libmultipath: Simplify read_line()
  * libmultipath: Zero-terminate sysfs_attr_get_value() result
  * libmultipath: Print line number for which parsing failed
  * libmultipath: Accept "*" as a valid regular expression
  * multipath: Wrong sysfs attribute used for iSCSI settings
    (bnc#883808)
- Check for valid DM_DEVICE_INFO before proceeding
  (bnc#888453)
- Scalability fixes (bnc#880356):
  * Separate out uevent parsing functions
  * Use poll() when receiving uevents
  * multipathd: push down lock in checkerloop()
  * Allow specific CLI commands to run unlocked
  * Push down vector lock during uevent processing

OBS-URL: https://build.opensuse.org/request/show/242290
OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=72
2014-07-26 10:06:45 +00:00

1216 lines
43 KiB
Plaintext
Raw Blame History

-------------------------------------------------------------------
Fri Jul 25 10:53:27 CEST 2014 - hare@suse.de
- Patches from upstream:
* enable gcc format-security check
* Accept "*" as a valid regular expression
* check info.exists to get valid value
* Don't forget to reload table when both reload and rename
is required
* libmultipath: Simplify read_line()
* libmultipath: Zero-terminate sysfs_attr_get_value() result
* libmultipath: Print line number for which parsing failed
* libmultipath: Accept "*" as a valid regular expression
* multipath: Wrong sysfs attribute used for iSCSI settings
(bnc#883808)
- Check for valid DM_DEVICE_INFO before proceeding
(bnc#888453)
- Scalability fixes (bnc#880356):
* Separate out uevent parsing functions
* Use poll() when receiving uevents
* multipathd: push down lock in checkerloop()
* Allow specific CLI commands to run unlocked
* Push down vector lock during uevent processing
-------------------------------------------------------------------
Wed Jul 23 12:35:44 CEST 2014 - hare@suse.de
- recovery_tmo for iSCSI sessions not updated (bnc#883808)
- Only filter for udev property if uid_attribute is present
- Read wwid from sysfs vpg_pg83 attribute
- Update multipath.conf.5 to clarify wwid generation
- kpartx: Fixup persistent name generation (bnc#887582)
- Revert 'return PATH_DOWN for quiesced paths'
- Do not treat 'transport-offline' paths as 'offline' (bnc#888378)
-------------------------------------------------------------------
Wed Jul 9 11:46:23 CEST 2014 - hare@suse.de
- multipath: Check for running daemon when called with '-u'
(bnc#886154)
-------------------------------------------------------------------
Fri Jul 4 09:14:11 CEST 2014 - hare@suse.de
- multipath: use option '-i' when called from udev (bnc#885628)
- multipath: add option '-i' to ignore wwids file (bnc#885628)
- Update hwtable for EMC XtremIO (bnc#880510)
- Remove unused variable 'aas' from alua prioritzer
- Patches from upstream:
* Add multipath.conf force_sync option
* make prioritizers use checker_timeout, if set
* Improve multipath.conf syntax checking
* orphan paths on failed add
* Add missing interactive commands to multipathd man page
* Make multipathd orphan paths that were removed externally
* allow users to add wwids to /etc/multipath/wwids with -a
* change conf->dry_run to conf->cmd
* Return the correct size buffer in set_value()
* Fix memory issues in path reordering failure code paths
-------------------------------------------------------------------
Tue Jun 24 09:45:57 CEST 2014 - hare@suse.de
- Fixup race condition with udev (bnc#883878)
- Cleanup foreground operation handling in multipathd
- Fix some minor issues in path reordering code (bnc#870465)
- Patches from upstream:
* Use existing user friendly names if possible
* kpartx: fix extended partition size for >512b sectors
* Mismatch between allocation length and transfer length in
rdac prio
* Mismatch between allocation length and transfer length in
emc_clariion prio.
-------------------------------------------------------------------
Fri Jun 13 10:51:48 CEST 2014 - hare@suse.de
- 11-dm-mpath.rules: Import blkid values if all paths are down
(bnc#875233)
- kpartx.rules: Skip kpartx for multipath events (bnc#875233)
-------------------------------------------------------------------
Tue May 20 12:36:57 CEST 2014 - hare@suse.de
- Fix race condition with systemd (bnc#878809)
-------------------------------------------------------------------
Fri May 16 10:26:03 CEST 2014 - hare@suse.de
- Fix segfault when fast_io_fail_tmo is empty in config file
- Crafted ordering of child paths for round robin path selector
(bnc#870465)
- multipath: enable sync support (bnc#872297)
- Whitelist devices in multipath.rules (bnc#877281)
-------------------------------------------------------------------
Fri Apr 11 12:23:29 CEST 2014 - hare@suse.de
- Install multipath rule under 56-multipath.rules (bnc#873151)
- Implement option '-u' for uevents (bnc#873151)
- Remove trailing linefeed from sysfs attributes
- Make checker_put() and prio_put() idempotent
- Implement 'list path' CLI command
- Disable reassign maps per default
- Allow for NULL path when printing information
- Fixup wwid blacklist printing
- Use SCSI_IDENT_.* as the default property whitelist (bnc#872929)
- Do not call 'blkid' in kpartx.rules
- Allow empty wwids during discovery (bnc#872712)
- Always set verbosity to '0' when checking devices (bnc#867840)
- Fixup multipath rules for booting (bnc#870764)
- Fixup dependencies in multipathd.service (bnc#872712)
- Do not print empty device strings during discovery (bnc#872712)
- Use multipath wwid if path wwid is empty (bnc#872712)
- Set the correct PID when running in debug mode
-------------------------------------------------------------------
Fri Mar 21 12:28:10 CET 2014 - hare@suse.de
- Fixup ordering cycle with systemd (bnc#863218)
- Rebase git repository to match with upstream
- Revert 'display uevent sequence number'; not required anymore
-------------------------------------------------------------------
Thu Mar 13 00:56:11 CET 2014 - ro@suse.de
- downgrade device-mapper requirement to 1.2.78 until 1.2.82
is available anywhere
-------------------------------------------------------------------
Wed Mar 12 16:36:56 CET 2014 - hare@suse.de
- Update FSF address
- Add 11-dm-mpath.rules (bnc#867968)
- Link against libsystemd instead of libsystemd-daemon
-------------------------------------------------------------------
Fri Feb 28 15:53:24 CET 2014 - hare@suse.de
- Fixup spec file to correct rules permissions
-------------------------------------------------------------------
Fri Feb 28 12:45:19 CET 2014 - hare@suse.de
- Fixup 40-multipath.rules installation
-------------------------------------------------------------------
Wed Feb 26 14:38:49 CET 2014 - hare@suse.de
- Add 40-multipath.rules for dracut support
-------------------------------------------------------------------
Fri Feb 14 14:55:28 CET 2014 - hare@suse.de
- Install kpartx rules with correct prefix for dracut
- filter for missing property in get_refwwid() (bnc#862250)
- Double uevent stacksize yet again (bnc#855379)
- do not fail discovery on individual devices (bnc#860850)
- Prefer deprecated 'getuid' callout (bnc#861534)
- Skip paths with empty wwid (bnc#861534)
- correctly terminate string in strlcpy() (bnc#861534)
- Don't chop const strings
- Fixup typo in Makefile
- display uevent sequence number on 'show daemon'
-------------------------------------------------------------------
Tue Jan 21 16:32:33 CET 2014 - hare@suse.de
- Fixup build issues
-------------------------------------------------------------------
Tue Jan 21 13:58:15 CET 2014 - hare@suse.de
- Update to official version 0.5.0
- remove: multipath-tools-0.4.9.tar.bz2
- remove: multipath-tools-0.4.9-opensuse-12.3.diff.bz2
- add: multipath-tools-0.5.0.tar.bz2
- add: multipath-tools-0.5.0-sles12.diff.bz2
- Merge:
- multipath-tools-make-flexible-install-of-systemd-and-udev-files.patch
-------------------------------------------------------------------
Tue Apr 16 10:08:18 UTC 2013 - idonmez@suse.com
- Add Source URL, see https://en.opensuse.org/SourceUrls
- use %setup -c to support the tarball
-------------------------------------------------------------------
Fri Feb 15 13:55:24 UTC 2013 - cfarrell@suse.com
- license update: GPL-2.0
Substantial number of GPL-2.0 files in the package
-------------------------------------------------------------------
Fri Feb 15 12:15:09 UTC 2013 - rmilasan@suse.com
- Make installation of systemd unit and udev files more flexible.
add: multipath-tools-make-flexible-install-of-systemd-and-udev-files.patch
-------------------------------------------------------------------
Fri Feb 1 10:29:11 CET 2013 - hare@suse.de
- Update to latest mainline git version
- Merge systemd fixes
- Generate persistent device names for kpartx (bnc#799274)
-------------------------------------------------------------------
Sun Aug 26 02:05:37 UTC 2012 - crrodriguez@opensuse.org
- Systemd: use default service type instead of forking
- Systemd: fix spec pre/post scripts.
-------------------------------------------------------------------
Tue Jul 17 13:21:47 UTC 2012 - rmilasan@suse.com
- Drop patch 0001-multipath.rules.patch, multipath not ready yet.
-------------------------------------------------------------------
Tue Jul 17 12:43:43 UTC 2012 - rmilasan@suse.com
- Fix the installation of multipath.rules file.
-------------------------------------------------------------------
Mon Jun 11 12:58:05 UTC 2012 - rmilasan@suse.com
- Drop RUN+="socket:..." and update the multipath.rule like Fedora
does.
-------------------------------------------------------------------
Wed May 30 17:32:10 CEST 2012 - hare@suse.de
- Update to version 0.4.9
- Merge in latest changes from mainline
-------------------------------------------------------------------
Fri Apr 20 08:35:06 UTC 2012 - rmilasan@suse.com
- Run update of initrd at %post and %postun.
We need this to make sure initrd reflects the updates.
-------------------------------------------------------------------
Fri Sep 30 15:40:21 UTC 2011 - uli@suse.com
- cross-build fix: use %__cc macro
-------------------------------------------------------------------
Fri May 27 09:34:36 UTC 2011 - lnussel@suse.de
- don't hard require boot.device-mapper in boot.multipath. dm-mod is
autoloaded when accessing /dev/mapper/control anyways.
-------------------------------------------------------------------
Mon Apr 4 16:40:14 UTC 2011 - crrodriguez@opensuse.org
- fix build fail with AS_NEEDED by default
-------------------------------------------------------------------
Fri Nov 26 10:18:45 CET 2010 - meissner@suse.de
- updated one more dm_simplecmd caller with &cookie.
- bumped 1 character buffer to 1 byte more for leading \0
-------------------------------------------------------------------
Tue Jul 6 16:17:27 CEST 2010 - hare@suse.de
- Merge with fixes from mainline.
-------------------------------------------------------------------
Wed Jun 30 16:19:00 UTC 2010 - jengelh@medozas.de
- fix compilation on bi-arch by specifying LIB=%_lib
(Makefiles would erroneously assume a 64-bit target just by the
sheer presence of lib64, which is wrong)
- always add in -D_GNU_SOURCE to get at struct ucred
-------------------------------------------------------------------
Wed Jun 23 15:09:46 CEST 2010 - hare@suse.de
- Increase initial timeout for 'tur' checker (bnc#616694)
-------------------------------------------------------------------
Fri Jun 18 13:19:13 CEST 2010 - hare@suse.de
- Set geometry information for multipath maps (bnc#613363)
- Reset 'running' parameter for directio (bnc#600043)
- Add fallback to init script for older versions (bnc#602957)
-------------------------------------------------------------------
Fri Jun 4 12:18:02 CEST 2010 - hare@suse.de
- Add HP 2000 to internal hardware table (bnc#603359)
- Make path state messages unique
- Add 'reassign_maps' configuration parameter
- Profiling fixes:
* Update 'max_fds' handling
* Use strcmp() instead of strcmp_chomp()
* Simplify sysfs_get_device()
* Remove duplicate calls to path_offline()
* Simplify dm_get_name()
* Fixup devt2devname()
* Rework dm_reassign()
- check argument length in execute_program(bnc#610914)
- Do not use LOG_CONS when opening syslog (bnc#610914)
- Remove pid file usage from init scripts (bnc#600412)
- Fixup boot.multipath init script (bnc#600412)
-------------------------------------------------------------------
Wed May 12 08:08:47 CEST 2010 - hare@suse.de
- Always provide symlinks for udev (bnc#603785)
-------------------------------------------------------------------
Thu May 6 14:02:11 CEST 2010 - hare@suse.de
- Use minor number in ev_remove_map() (bnc#599770)
- signal_waiter() overwrites structure (bnc#591399)
- Serialize startup on large machines (bnc#598697)
- Update multipath(8) manpage for '-p' (bnc#602970)
- Mark 'readsector0' checker as deprecated (bnc#589340)
-------------------------------------------------------------------
Mon Apr 26 13:33:30 CEST 2010 - hare@suse.de
- Errorneous message 'error starting uevent listener'
- Graceful shutdown of logging thread (bnc#591399)
-------------------------------------------------------------------
Mon Apr 26 12:02:32 CEST 2010 - hare@suse.de
- Missing '-p' option for mkdir in mkinitrd script (bnc#597786)
- rdac message not printed correctly (bnc#598302)
- Use alias when printing log messages (bnc#598302)
- valgrind fixes (bnc#591399)
- Use VECTOR_SIZE() defines
- Update hwtable factorization
- Use log_close() on shutdown
- Use refcounting for checkers (bnc#591399)
- More valgrind fixes
-------------------------------------------------------------------
Tue Apr 20 13:41:07 CEST 2010 - hare@suse.de
- Provide correct persistent symlinks for user_friendly_names
(bnc#596301)
- Fixup hardware table for LSI arrays (bnc#597713)
- Reassign maps during startup (bnc#586834)
- Update manpage
-------------------------------------------------------------------
Tue Apr 20 12:51:53 CEST 2010 - mmarek@suse.cz
- Use mkdir -p in mkinitrd setup script (bnc#597786).
-------------------------------------------------------------------
Fri Apr 9 15:30:55 CEST 2010 - hare@suse.de
- Remove 'minor' argument from add_map_without_path
- Check for correct device-mapper device in uevent handler
- Start uevent service handler from main thread
- Do not reassign multipath maps (bnc#594341)
- Protect waiter structure by mutex (bnc#581200)
- Log directly to syslog on shutdown (bnc#581200)
- Clear up uevent queue on shutdown
- Add more IBM/FAStT arrays (bnc#578738)
-------------------------------------------------------------------
Mon Mar 29 16:35:15 CEST 2010 - hare@suse.de
- Display average priority as group priority (bnc#588591)
- Implement 'wait event' cli command (bnc#586834)
- Reset existing maps (bnc#577894)
-------------------------------------------------------------------
Mon Mar 15 13:54:56 CET 2010 - hare@suse.de
- Setup 'checkint' when loading config file (bnc#586847)
-------------------------------------------------------------------
Wed Mar 10 11:20:56 CET 2010 - hare@suse.de
- Fix typo in persistent rules for by-label/by-uuid
- Update debug string in verify_paths()
- Evaluate feature setting in verify_paths() (bnc#584197)
-------------------------------------------------------------------
Fri Mar 5 09:34:37 CET 2010 - hare@suse.de
- Fixup 'async_timeout' initialization again (bnc#580413)
-------------------------------------------------------------------
Fri Feb 26 12:37:10 UTC 2010 - coolo@novell.com
- fix buffer overflow in strncat
-------------------------------------------------------------------
Mon Feb 22 10:08:44 CET 2010 - hare@suse.de
- 'reset log' cli command crashes daemon (bnc#577889)
- Initialize 'async_timeout' variable correctly (bnc#580413)
-------------------------------------------------------------------
Thu Feb 4 11:28:36 CET 2010 - hare@suse.de
- Add hardware defaults for EMC Invista (bnc#573870)
- Use '--replace-whitespace' for scsi_id (bnc#572209)
- Asynchronous mode for tur checker (bnc#552688)
- Update queue_if_no_path after sync with kernel state
(bnc#570932)
- Add 'max_polling_interval' config variable (bnc#570932)
- Add 'async_timeout' configuration variable (bnc#570932)
- Use default scsi_id callout for EMC Symmetrix (bnc#528481)
- Update path_offline() to return device status
- Update filename in init script
- Fixes from upstream:
* do not allow 0 size for multipath devices
* Add nexenta comstart hardware defaults
* Add checks for conf->xxx
* Add %z wildcard to display path serial
* don't pretend config file has setup parameters
* documentation fixes
-------------------------------------------------------------------
Mon Jan 25 14:44:43 CET 2010 - hare@suse.de
- Fixup kpartx initrd script to handle loop devices (bnc#523749)
- Switch off 'queue_if_no_path' before removing maps (bnc#475523)
- Update logical partition handling (bnc#551827)
-------------------------------------------------------------------
Fri Jan 22 16:19:17 CET 2010 - hare@suse.de
- Fix mkinitrd scripts for 64bit (bnc572143)
- Remove logical partitions maps with 'multipath -f'
-------------------------------------------------------------------
Fri Jan 22 14:30:36 CET 2010 - ro@suse.de
- testing for existence of /lib64 is not sufficient to find out
if we are building for a lib64 platform
-------------------------------------------------------------------
Mon Jan 11 15:10:18 CET 2010 - hare@suse.de
- Update dev_loss_tmo for no_path_retry (bnc#492469)
-------------------------------------------------------------------
Tue Nov 17 16:36:19 CET 2009 - hare@suse.de
- Merge in changes from OpenSUSE 11.2
- Update 'no_path_retry' correctly for failed paths (bnc#534666)
- Update no_path_retry setting when evaluating features (bnc#542145)
- directio: block count calculation wrong (bnc#549028)
- multipath segfaults if configuration file contains errors
(bnc#540118)
-------------------------------------------------------------------
Thu Oct 22 16:29:35 CEST 2009 - hare@suse.de
- Make 'param' local (bnc#548708)
- Include multipath-fix.patch in git tree.
-------------------------------------------------------------------
Mon Sep 28 15:34:02 CEST 2009 - hare@suse.de
- Fixup strip whitespaces from getuid output (bnc#542085)
- Change prefix for DASD devices to 'ccw'
- Update no_path_retry setting when evaluating features (bnc#542145)
-------------------------------------------------------------------
Wed Sep 16 12:54:03 CEST 2009 - hare@suse.de
- Update features when queue_if_no_path is set (bnc#511607)
- Ignore error messages when multipathd is not started
- Add debugging output for feature changes
- Add generic LSI/Engenio controller (bnc#508030)
- Update 'no_path_retry' correctly for failed paths (bnc#534666)
- TUR checker should not return 'failed' for reservation conflict
(bnc#498413)
-------------------------------------------------------------------
Tue Sep 8 20:56:53 UTC 2009 - aj@suse.de
- Fix last patch, one caller of dm_simplecmd was not updated
(multipath-fix.patch).
-------------------------------------------------------------------
Fri Aug 21 15:49:47 CEST 2009 - hare@suse.de
- Update to latest upstream git version
- Merge in SLES11 fixes
- Build package from git tree
- Implement '-u' option for kpartx (bnc#517442)
-------------------------------------------------------------------
Mon Jul 13 12:24:34 CEST 2009 - hare@suse.de
- Check for errors in pthread_create()
- Lock vectors during shutdown
- Cleanup various MALLOC/REALLOC callers
- Fix multipathd crash on shutdown
- Do not run kpartx on dm-uevent messages (bnc#473352)
- Set pthread stacksize correctly (bnc#485287)
- Add STK arrays to internal hardware table (bnc#503855)
- Correct persistent symlink for cciss (bnc#497997)
- Backport some fixes from upstream (bnc#445023)
- Add 'reset log' cli command
- no_path_retry <N> causes I/O to fail (bnc#485281)
- Terminate uevent service queue
- Wait for daemon to shutdown (bnc#481389)
- Update cli request processing
- Safe memory allocation in cli_handlers
- Use 'LOG_CONS' option for openlog()
- Remove sysfs attribute cache
- Add 'shutdown' cli command
- Display FC error messages correctly
- Wait for devices in init script (bnc#487586)
- Always synchronize with dm state (bnc#447887)
- Add 'aas' path prioritizer (bnc#472069)
- Synchronize daemon startup with init file (bnc#481389)
- Merge feature string in assemble_map (bnc#507793)
-------------------------------------------------------------------
Fri Jun 19 10:35:46 CEST 2009 - coolo@novell.com
- disable as-needed for this package as it fails to build with it
-------------------------------------------------------------------
Fri Mar 20 10:43:12 CET 2009 - hare@suse.de
- Reset checker message for blocked checkers
- Increase priority for EMC Clariion arrays (bnc#484529)
- Start waiter threads for single paths correctly (bnc#473841)
- Use pthread_sigmask in alias.c when called from daemon.
-------------------------------------------------------------------
Thu Mar 19 12:09:03 CET 2009 - hare@suse.de
- Add %pre and %post scripts to stop multipathd during update
- Don't set FC parameter on non-SCSI devices
- multipath -t crashes with invalid configuration file
-------------------------------------------------------------------
Fri Mar 13 14:21:05 CET 2009 - hare@suse.de
- Don't remove partition mappings on stop (bnc#468826)
- Set stacksize for log thread
- Terminate all I/O before flushing maps (bnc#475523)
- Select 'features' keyword from multipath setting (bnc#465009)
-------------------------------------------------------------------
Tue Mar 10 12:46:36 CET 2009 - hare@suse.de
- Use lists for uevent processing (bnc#478874)
- Set stacksize of uevent handling thread (bnc#478874)
- Increase uevent buffer size
- Strip trailing blanks from wwid
- Stack overflow in uev_trigger (bnc#476540)
-------------------------------------------------------------------
Thu Feb 26 12:36:40 CET 2009 - hare@suse.de
- Fixup multibus zero path handling (bnc#476330)
- Update checker handling for blocked devices
- Only pass block events to multipathd
- Clean up uevent processing (bnc#478874)
- Set stacksize correctly for event processing thread (bnc#478874)
-------------------------------------------------------------------
Mon Feb 23 16:36:32 CET 2009 - hare@suse.de
- Remove stray umask() call (bnc#458598)
- Don't call kpartx if no paths are active (bnc#473352)
-------------------------------------------------------------------
Thu Feb 19 16:26:32 CET 2009 - hare@suse.de
- Multipathd dies immediately after startup (bnc#473029)
- Return ghost state if port is in standby (bnc#475816)
- Switch off queue_if_no_path before removing paths (bnc#475523)
-------------------------------------------------------------------
Mon Feb 9 14:53:01 CET 2009 - hare@suse.de
- Fix leastpending loadbalancer output (bnc#444199)
- Start waitevent checker on new paths (bnc#473841)
- Use 'noflush' for kpartx (bnc#473352)
-------------------------------------------------------------------
Fri Feb 6 15:00:45 CET 2009 - hare@suse.de
- Display multipath output for leastpending loadbalancer
properly (bnc#444199)
-------------------------------------------------------------------
Wed Feb 4 11:38:31 CET 2009 - hare@suse.de
- Set queue_if_no_path setting during map reload (bnc#472253)
- Remove obsolete 'umount map' uevent handling
- Retry TUR on driver errors (bnc#456961)
-------------------------------------------------------------------
Tue Feb 3 11:22:41 CET 2009 - hare@suse.de
- Copy persistent bindings file into initramfs (bnc#468804)
- Invert DM_STATE check for kpartx rules (bnc#440959)
-------------------------------------------------------------------
Mon Feb 2 11:27:51 CET 2009 - hare@suse.de
- Correct dbg_malloc() definition
- Fix more memory leaks
- Double free on path release (bnc#458393)
-------------------------------------------------------------------
Mon Jan 26 14:17:57 CET 2009 - hare@suse.de
- Don't access blocked devices in checkerloop()
- Check for validity in VECTOR_XXX defines (bnc#469269,bnc#457465)
-------------------------------------------------------------------
Fri Jan 23 14:15:18 CET 2009 - hare@suse.de
- Update dev_loss_tmo handling (bnc#458393)
- Fix directio error messages
- Update sdev_state handling
-------------------------------------------------------------------
Mon Jan 19 09:18:28 CET 2009 - hare@suse.de
- Add new HP machines to hardware table (bnc#442133)
- Print device-mapper tables for debugging
- Properly quote variables in mkinitrd scripts (bnc#447966)
- shuffle call to memarea_init
- Add xdr_setsite in init scripts (bnc#459529)
-------------------------------------------------------------------
Tue Jan 13 16:14:39 CET 2009 - hare@suse.de
- Do not run checkers or prioritizers on blocked devices
(bnc#464155)
- Implement dev_loss_tmo and fast_io_fail_tmo (bnc#464155)
- Use default values for dev_loss_tmo and fast_io_fail_tmo
- Display checker and prio name on failure
- Add more debugging output
-------------------------------------------------------------------
Mon Jan 12 17:28:47 CET 2009 - hare@suse.de
- Set max_fds setting for multipath (bnc#457443)
- Enhance error messages for checker and prio loading (bnc#456214)
- Fix merge errors for prio_weightedpath (bnc#441007)
- Fix sysfs_attr_get_value (bnc#456747)
- Do not reinitialize prio and checker lists after config file
has been parsed (bnc#464373)
- Minor cleanups
-------------------------------------------------------------------
Thu Dec 4 15:05:08 CET 2008 - hare@suse.de
- Split off IBM ESS hwtable entries (bnc#439763)
- Reload map when device R/O setting changes (bnc#440959)
-------------------------------------------------------------------
Fri Nov 21 14:07:56 CET 2008 - hare@suse.de
- Add 'Weighted Paths' prioritizer (bnc#441007)
- Fix crashes in update_multipath
-------------------------------------------------------------------
Thu Nov 20 16:10:48 CET 2008 - hare@suse.de
- Valgrind fixes
* Add missing initialisation
* Always allocate memory for alias
* Check return value of basename
- Adapt to new sysfs layout (bnc#435215, bnc#445041)
- Use /sys/dev to speedup reverse lookups
- Rework sysfs device handling (bnc#435215, bnc#438031)
- Search for correct hardware entry during reconfigure (bnc#435688)
- Use local variables for device mapper params
- Allow zero paths for multipath maps
-------------------------------------------------------------------
Mon Nov 17 12:42:34 CET 2008 - hare@suse.de
- Update HP hardware table (bnc#442133)
- Zero out lines in print.c (bnc#445023)
-------------------------------------------------------------------
Mon Nov 10 08:51:26 CET 2008 - hare@suse.de
- Check for empty mpvecs in mpvec_garbage_collector() (bnc#437245)
- dmraid uuid starts with 'DMRAID' (bnc#439439)
- Handle arguments to multipathd from the init file
-------------------------------------------------------------------
Thu Nov 6 17:36:51 CET 2008 - ro@suse.de
- commenting multiline rpm macros is dangerous (read broken)
remove percent sign in commented macro lines
-------------------------------------------------------------------
Mon Nov 3 15:37:08 CET 2008 - hare@suse.de
- Use pthread_join() during shutdown to avoid crash (bnc#437245)
- Fixup '%n' to handle '!' kernel device name syntax (bnc#435172)
- Use correct commandline for cciss scsi_id callouts (bnc#435172)
- Do not check for valid mp context in get_state() (bnc#433659)
- Link directio checker against libaio (bnc#433659)
- Use regmatch when checking for duplicates in hwtable (bnc#439763)
-------------------------------------------------------------------
Mon Oct 27 10:30:18 CET 2008 - hare@suse.de
- Patches from mainline:
* Increase bindings file lock timeout
* Fixes for 'show paths format'
* Add 'show wildcards' cli cmd
* Add support for IBM storage devices
- fopen() returns NULL on failure (bnc#432598)
- Read verbosity level from configuration file (bnc#388284)
- kpartx -l does not remove it's loop device (bnc#417266)
- Missing fixes for libprio ontap.c (bnc#426975)
- Increase buffer size in find_loop_by_file (bnc#436428)
- Include SCSI device handler modules for initrd (bnc#431877)
-------------------------------------------------------------------
Fri Sep 26 16:26:55 CEST 2008 - hare@suse.de
- Implement map resize (FATE#302007)
- Handle cciss devices correctly (bnc#419123)
-------------------------------------------------------------------
Wed Sep 24 22:59:11 CEST 2008 - ro@suse.de
- use udevadm info instead of udevinfo
-------------------------------------------------------------------
Wed Sep 3 11:09:34 CEST 2008 - hare@suse.de
- Merge in fixes from upstream:
* Add IBM IPR to hardware table (bnc#419086)
* Add IBM DS4300 to hardware table
* Fix settings for scsi_id changes
- Call mkinitrd_setup during %post and %postun (bnc#413709)
-------------------------------------------------------------------
Thu Aug 28 17:08:16 CEST 2008 - ro@suse.de
- fix init scripts
-------------------------------------------------------------------
Wed Jul 23 14:45:18 CEST 2008 - hare@suse.de
- Update to version 0.4.8
- Include changes from SLES10
- Include mkinitrd scriptlets
-------------------------------------------------------------------
Wed May 28 09:50:28 CEST 2008 - hare@suse.de
- Calculate correct partition offset in kpartx (bnc#394658)
-------------------------------------------------------------------
Fri May 9 13:25:30 CEST 2008 - hare@suse.de
- Fixup kpartx rules (bnc#387667)
-------------------------------------------------------------------
Tue Apr 29 17:05:19 CEST 2008 - hare@suse.de
- Merge in fixes from upstream
- Merge fixes from SLES10 SP2
-------------------------------------------------------------------
Wed Sep 19 15:30:41 CEST 2007 - hare@suse.de
- Fixup generated dm_linear udev rules (#218122)
-------------------------------------------------------------------
Thu Aug 30 09:24:27 CEST 2007 - hare@suse.de
- Rework dm_linear; udev rules should only be
created if the feature was activated (#302422)
-------------------------------------------------------------------
Fri Aug 10 16:48:31 CEST 2007 - hare@suse.de
- Implement dm_linear (#218122)
-------------------------------------------------------------------
Thu Aug 2 11:10:35 CEST 2007 - hare@suse.de
- Merge in latest fixes from upstream
- Remove local patches; merge with upstream
- Fix kpartx handling of extended partitions
- Use underscores for partition names (#293792)
-------------------------------------------------------------------
Mon May 21 15:34:07 CEST 2007 - hare@suse.de
- Rework udev handling
- Split off kpartx package
-------------------------------------------------------------------
Mon May 14 16:20:55 CEST 2007 - hare@suse.de
- Merge in latest fixes from upstream
- Add all SuSE specific files to git repository.
-------------------------------------------------------------------
Fri May 11 16:06:16 CEST 2007 - hare@suse.de
- Include latest changes from upstream
- Remove libsysfs (242766)
- Handle extended partitions for kpartx
-------------------------------------------------------------------
Mon Dec 4 16:51:13 CET 2006 - dmueller@suse.de
- don't build as root
-------------------------------------------------------------------
Fri Nov 17 11:55:00 CET 2006 - hare@suse.de
- integrate upstream fixes
- update udev rule for YaST2 dmraid support (217807])
-------------------------------------------------------------------
Mon Nov 6 13:11:17 CET 2006 - hare@suse.de
- Really fixup udev rule (216167).
-------------------------------------------------------------------
Fri Oct 20 02:07:47 CEST 2006 - ro@suse.de
- make it build
-------------------------------------------------------------------
Mon Sep 25 10:03:49 CEST 2006 - hare@suse.de
- update to latest fixes from git tree
- remove fixes integrated in upstream
- fixup udev rule (#203688)
-------------------------------------------------------------------
Thu Sep 14 00:18:10 CEST 2006 - ro@suse.de
- use device-mapper-devel in BuildRequires
-------------------------------------------------------------------
Thu Aug 31 10:56:01 CEST 2006 - hare@suse.de
- include latest fixes from git tree
- update kpartx_id and udev rules to work
with dmraid.
- Fix return value for multipath -l
-------------------------------------------------------------------
Thu Aug 17 02:07:59 CEST 2006 - ro@suse.de
- workaround problem in git-patch
normal patch can't do a "rename", so copy file first
-------------------------------------------------------------------
Tue Jul 11 15:04:59 CEST 2006 - hare@suse.de
- Update to official version 0.4.7
- Refactor git update to apply to 0.4.7
-------------------------------------------------------------------
Wed Jun 28 13:51:36 CEST 2006 - hare@suse.de
- Remove blacklisting of dasd device node,
use product_blacklist instead (#188688)
-------------------------------------------------------------------
Mon Jun 12 15:14:41 CEST 2006 - hare@suse.de
- Add 72-multipath-compat.rules to create 'by-name'
symlink again for compability (#183663)
-------------------------------------------------------------------
Fri Jun 2 12:47:05 CEST 2006 - hare@suse.de
- Merge in fixed from upstream
- Set device-mapper name correctly (#181127)
-------------------------------------------------------------------
Thu Jun 1 17:29:23 CEST 2006 - hare@suse.de
- Merge in fixes from upstream
- Fixup aliasing handling
- Fix string length in pp_alua
- Use correct regexp patterns for hwtable (#177842)
- Fixup 71-multipath.rules to work correctly with the
updated device-mapper online/offline events (#176516 - LTC23961)
- Add kpartx_id for the updated 71-multipath.rules
-------------------------------------------------------------------
Mon May 22 17:16:00 CEST 2006 - schwab@suse.de
- Don't strip binaries.
-------------------------------------------------------------------
Tue May 2 12:48:56 CEST 2006 - hare@suse.de
- Merge in fixes from upstream
- Merged local patches
- Added hds_modular prioritizer
- Remove merged patches
- Allow for setting of maximum number of open files (#149979)
- Implement 'stop' for init scripts
-------------------------------------------------------------------
Mon Apr 10 09:48:16 CEST 2006 - hare@suse.de
- Lowering priority for pp_tpc
- Split off DS6000 to fixup priority handler (#161347)
-------------------------------------------------------------------
Wed Apr 5 12:14:53 CEST 2006 - hare@suse.de
- Disable debug messages in pp_tpc.
-------------------------------------------------------------------
Wed Mar 29 09:27:50 CEST 2006 - hare@suse.de
- Explicitely create partitions at boot time (#159927)
-------------------------------------------------------------------
Thu Mar 23 11:36:25 CET 2006 - hare@suse.de
- Add hwtable entry for IBM 3526.
-------------------------------------------------------------------
Tue Mar 14 16:40:41 CET 2006 - hare@suse.de
- Fix another typo in mpath_id.
-------------------------------------------------------------------
Tue Mar 14 16:20:33 CET 2006 - hare@suse.de
- Fix typo in mpath_id.
-------------------------------------------------------------------
Mon Mar 13 13:29:08 CET 2006 - hare@suse.de
- Fix autobuild warnings.
- Include some minor fixed from upstream.
-------------------------------------------------------------------
Thu Mar 9 11:28:11 CET 2006 - hare@suse.de
- Add mpath_id program to call kpartx only on multipathed
devices (#149995 - LTC21557).
- Include latest fixes from upstream.
-------------------------------------------------------------------
Wed Feb 8 16:13:15 CET 2006 - hare@suse.de
- Add device blacklisting (#85778)
- Further manpage installation fixes (#146179, #147053, #147911)
-------------------------------------------------------------------
Wed Jan 25 21:38:27 CET 2006 - mls@suse.de
- converted neededforbuild to BuildRequires
-------------------------------------------------------------------
Thu Jan 19 13:59:32 CET 2006 - hare@suse.de
- Fix manpage installation.
-------------------------------------------------------------------
Tue Jan 17 09:01:03 CET 2006 - hare@suse.de
- Include latest git fixes
- Remove old patches which are now upstream
- Add new hwtable entry for shark (#142176)
-------------------------------------------------------------------
Fri Dec 16 15:20:47 CET 2005 - hare@suse.de
- Fix dependencies for /etc/init.d/boot.multipath
- Fix kpartx rules to generate proper partition names.
-------------------------------------------------------------------
Wed Dec 7 16:49:02 CET 2005 - hare@suse.de
- Update to multipath-tools-0.4.6
- Include latest git fixes
- Port patches from SLES9 SP3
-------------------------------------------------------------------
Mon Oct 31 12:30:14 CET 2005 - dmueller@suse.de
- don't build as root
-------------------------------------------------------------------
Mon Sep 5 17:40:04 CEST 2005 - matz@suse.de
- Fix broken usage of self-defined syscall [#114933].
-------------------------------------------------------------------
Fri Aug 26 16:00:36 CEST 2005 - hare@suse.de
- Fix kpartx DASD partition support
-------------------------------------------------------------------
Thu Aug 4 16:45:27 CEST 2005 - hare@suse.de
- Add 'directio' path checker
- Add support for S/390 DASD (PAV enablement).
- Update to package from SLES9
-------------------------------------------------------------------
Thu Jun 23 10:05:56 CEST 2005 - lmb@suse.de
- LUs with a WWN containing "fd" were blacklisted (#93562).
-------------------------------------------------------------------
Thu Jun 16 16:33:42 CEST 2005 - lmb@suse.de
- Remove stray newline character from /dev/disk/by-name/ entries
(#85798, #86763)
- Clear /dev/disk/by-name/ on boot. (#85978)
- scsi_id now handles EMC Symmetrix; remove work-around for #86760.
-------------------------------------------------------------------
Wed Jun 15 13:31:47 CEST 2005 - meissner@suse.de
- use RPM_OPT_FLAGS.
-------------------------------------------------------------------
Mon Jun 13 23:51:59 CEST 2005 - ro@suse.de
- neededforbuild: udev -> sysfsutils
-------------------------------------------------------------------
Tue Jun 7 15:38:36 CEST 2005 - lmb@suse.de
- Import fixes from upstream.
- Hardware table updates for IBM ESS and EMC CX (#81688).
- Reinstate paths correctly after failure/restore cycle (#85781,
#86444).
- Create map names again and fix segfault in devmap_name (#85798).
-------------------------------------------------------------------
Tue May 24 15:16:16 CEST 2005 - hare@suse.de
- Fix segmentation fault with EMC Symmetrix (#85614).
- Update EMC Symmetrix entry in hwtable.
-------------------------------------------------------------------
Mon May 23 12:21:31 CEST 2005 - hare@suse.de
- Add hwtable entry for IBM DS6000. (#63903)
- Do a rescan for devices if multipath command line option is set.
-------------------------------------------------------------------
Fri May 20 15:29:45 CEST 2005 - hare@suse.de
- Fix devmap_name to use mapname and return proper status (#84748).
-------------------------------------------------------------------
Thu May 12 12:10:39 CEST 2005 - lmb@suse.de
- Don't complain about default prio callout command (#81695).
- Reflect recent changes in boot.multipath as well as multipathd init
scripts.
- Actually fail paths when they are detected to be failed by multipathd
(#81679).
- killproc/startproc/checkproc can't be used with multipathd because of
the way the daemon switches to its own namespace (#80443).
-------------------------------------------------------------------
Mon May 9 11:18:35 CEST 2005 - hare@suse.de
- Use proper path checker for SGI TPC arrays.
- Update hwtable entries for SGI TP9400 and SGI TP9500.
- Write correct PID file (#80443).
-------------------------------------------------------------------
Mon Apr 25 11:41:33 CEST 2005 - lmb@suse.de
- Update to 0.4.4: pp_alua now licensed as GPL (#78628).
- multipath-tools-oom-adj.patch: oom_adj to a valid value.
-------------------------------------------------------------------
Thu Apr 21 10:50:05 CEST 2005 - lmb@suse.de
- Update to 0.4.4-pre18 which fixes the multipathd to initialize
correctly in the absence of a configuration file (79239).
-------------------------------------------------------------------
Wed Apr 20 16:05:56 CEST 2005 - lmb@suse.de
- Put multipath cache back into /dev because /var might not be mounted.
- Correct hwtable entry SGI TP9400, TP9500 and IBM 3542.
-------------------------------------------------------------------
Wed Apr 20 13:32:51 CEST 2005 - lmb@suse.de
- Update to 0.4.4-pre16
- Build against device-mapper.1.01.xx correctly.
-------------------------------------------------------------------
Tue Apr 19 12:02:49 CEST 2005 - lmb@suse.de
- Build w/o device-mapper update again.
-------------------------------------------------------------------
Mon Apr 18 14:21:59 CEST 2005 - lmb@suse.de
- Update to 0.4.4-pre14
- Build versus device-mapper-1.01.01 to prevent deadlocks in
kernel-space.
- Fix devmap_name to work with udev.
- Fix startup of multipathd w/o configuration file present.
-------------------------------------------------------------------
Fri Apr 15 14:46:19 CEST 2005 - lmb@suse.de
- Add path priority checker for EMC CLARiiON and make necessary
adjustments so that it gets called by default (#62491).
- Set the default udev dir to '/dev'
-------------------------------------------------------------------
Fri Apr 15 13:18:42 CEST 2005 - hare@suse.de
- Fix to allocate default strings (#78056)
- Fix default entry for TPC9500.
-------------------------------------------------------------------
Wed Apr 13 08:30:21 CEST 2005 - hare@suse.de
- Added pp_alua path priority checker.
- Update to multipath-tools-0.4.4-pre12.
-------------------------------------------------------------------
Mon Apr 11 13:32:05 CEST 2005 - hare@suse.de
- Update to multipath-tools-0.4.4-pre10.
-------------------------------------------------------------------
Fri Apr 8 09:38:16 CEST 2005 - hare@suse.de
- Update multipath to handle only true multipath devices (#62491).
- Update kpartx to use the device mapper target name if available.
- Add boot.multipath script for early set up of multipath targets.
-------------------------------------------------------------------
Thu Mar 31 09:32:12 CEST 2005 - hare@suse.de
- Update devmap_name to select targets by table type (#62493).
-------------------------------------------------------------------
Tue Jan 25 11:16:26 CET 2005 - lmb@suse.de
- Update to 0.4.2 and fix some bugs + add support for the extended DM
multipath kernel module. (#47491)
-------------------------------------------------------------------
Thu Nov 11 18:15:15 CET 2004 - hare@suse.de
- Fix bugs to make it work on S/390 (#47491).
-------------------------------------------------------------------
Fri Nov 5 13:58:00 CET 2004 - hare@suse.de
- Update to version 0.3.6 (#47491).
- Fix multipath init script
- Install configuration file example.
- Install multipathd in /sbin instead of /usr/bin.
-------------------------------------------------------------------
Tue Jul 20 09:22:11 CEST 2004 - fehr@suse.de
- updated README mp-tools-issues.pdf (see #40640)
-------------------------------------------------------------------
Wed Jun 9 12:18:01 CEST 2004 - fehr@suse.de
- added pdf with README to package (see #40640)
-------------------------------------------------------------------
Thu Jun 3 18:11:41 CEST 2004 - fehr@suse.de
- updated to version 0.2.1
- removed patches zero-currpath.patch and rm-newline-in-name.patch
already contained in 0.2.1
-------------------------------------------------------------------
Thu Jun 3 09:38:49 CEST 2004 - fehr@suse.de
- added patch zero-currpath.patch (see bugzilla #40640)
-------------------------------------------------------------------
Wed May 26 20:14:05 CEST 2004 - uli@suse.de
- fixed to build on s390x
-------------------------------------------------------------------
Wed May 26 10:57:37 CEST 2004 - fehr@suse.de
- added patch rm-newline-in-name.patch (see bugzilla #40640)
-------------------------------------------------------------------
Tue May 25 10:43:15 CEST 2004 - fehr@suse.de
- created initial version of a SuSE package from version 0.2.0 of
multipath tools
-------------------------------------------------------------------
View Git Blame Copy Permalink