SHA256
1
0
forked from pool/ncurses
ncurses/ncurses-6.2.dif

783 lines
26 KiB
Plaintext

---
aclocal.m4 | 40 +++++++++-------
configure | 42 +++++++++--------
include/curses.h.in | 5 +-
include/termcap.h.in | 2
include/tic.h | 4 -
man/man_db.renames | 2
man/ncurses.3x | 4 +
misc/gen-pkgconfig.in | 8 +++
misc/terminfo.src | 107 +++++++++++++++++++++++++++++++++++++-------
ncurses/Makefile.in | 2
ncurses/run_cmd.sh | 11 ++++
ncurses/tinfo/MKfallback.sh | 14 ++++-
ncurses/tinfo/lib_setup.c | 3 +
progs/Makefile.in | 4 -
test/test.priv.h | 4 -
test/tracemunch | 2
16 files changed, 190 insertions(+), 64 deletions(-)
--- aclocal.m4
+++ aclocal.m4 2021-06-07 07:18:38.416598899 +0000
@@ -639,7 +639,7 @@ AC_CHECK_SIZEOF(bool,,[
AC_CACHE_CHECK(for type of bool, cf_cv_type_of_bool,[
rm -f cf_test.out
AC_TRY_RUN([
-#include <stdlib.h>
+//#include <stdlib.h> // conflict with exit declaration
#include <stdio.h>
#if defined(__cplusplus)
@@ -5784,12 +5784,15 @@ cat >>$cf_edit_man <<CF_EOF
echo "? missing rename for \$cf_source"
cf_target="\$cf_source"
fi
- cf_target="\$cf_subdir\${section}/\${cf_target}"
-
CF_EOF
fi
cat >>$cf_edit_man <<CF_EOF
+for t in \$cf_target; do
+ t="\$cf_subdir\${section}/\${t}"
+CF_EOF
+
+cat >>$cf_edit_man <<CF_EOF
sed -f "$cf_man_alias" \\
CF_EOF
@@ -5799,7 +5802,7 @@ cat >>$cf_edit_man <<CF_EOF
CF_EOF
else
cat >>$cf_edit_man <<CF_EOF
- < "\$i" >\$TMP
+ < "\$i" | sed -f $srcdir/edit_man.sed >\$TMP
CF_EOF
fi
@@ -5839,7 +5842,7 @@ cat >>$cf_edit_man <<CF_EOF
mv \$TMP.$cf_so_strip \$TMP
fi
fi
- cf_target="\$cf_target.$cf_so_strip"
+ t="\$t.$cf_so_strip"
CF_EOF
fi
@@ -5848,23 +5851,23 @@ case "$MANPAGE_FORMAT" in
cat >>$cf_edit_man <<CF_EOF
if test "\$form" = format ; then
# BSDI installs only .0 suffixes in the cat directories
- cf_target="\`echo \$cf_target|sed -e 's/\\.[[1-9]]\\+[[a-z]]*/.0/'\`"
+ t="\`echo \$t|sed -e 's/\.[[1-9]]\+[[a-z]]*/.0/'\`"
fi
CF_EOF
;;
esac
cat >>$cf_edit_man <<CF_EOF
- suffix=\`basename "\$cf_target" | sed -e 's%^[[^.]]*%%'\`
+ suffix=\`basename "\$t" | sed -e 's%^[[^.]]*%%'\`
if test "\$verb" = installing ; then
- echo "\$verb \$cf_target"
- \$INSTALL_DATA \$TMP "\$cf_target"
+ echo "\$verb \$t"
+ \$INSTALL_DATA \$TMP "\$t"
test -d "\$cf_subdir\${section}" &&
test -n "\$aliases" && (
cd "\$cf_subdir\${section}" && (
- cf_source=\`echo "\$cf_target" |sed -e 's%^.*/\\([[^/]][[^/]]*/[[^/]][[^/]]*$\\)%\\1%'\`
+ cf_source=\`echo "\$t" |sed -e 's%^.*/\\([[^/]][[^/]]*/[[^/]][[^/]]*$\\)%\\1%'\`
test -n "$cf_so_strip" && cf_source=\`echo "\$cf_source" |sed -e 's%\\.$cf_so_strip\$%%'\`
- cf_target=\`basename "\$cf_target"\`
+ t=\`basename "\$t"\`
for cf_alias in \$aliases
do
if test "\$section" = 1 ; then
@@ -5873,7 +5876,7 @@ cat >>$cf_edit_man <<CF_EOF
if test "$MANPAGE_SYMLINKS" = yes ; then
if test -f "\$cf_alias\${suffix}" ; then
- if ( cmp -s "\$cf_target" "\$cf_alias\${suffix}" )
+ if ( cmp -s "\$t" "\$cf_alias\${suffix}" )
then
continue
fi
@@ -5883,18 +5886,18 @@ CF_EOF
case "x$LN_S" in
(*-f)
cat >>$cf_edit_man <<CF_EOF
- $LN_S "\$cf_target" "\$cf_alias\${suffix}"
+ $LN_S "\$t" "\$cf_alias\${suffix}"
CF_EOF
;;
(*)
cat >>$cf_edit_man <<CF_EOF
rm -f "\$cf_alias\${suffix}"
- $LN_S "\$cf_target" "\$cf_alias\${suffix}"
+ $LN_S "\$t" "\$cf_alias\${suffix}"
CF_EOF
;;
esac
cat >>$cf_edit_man <<CF_EOF
- elif test "\$cf_target" != "\$cf_alias\${suffix}" ; then
+ elif test "\$t" != "\$cf_alias\${suffix}" ; then
echo ".so \$cf_source" >\$TMP
CF_EOF
if test -n "$cf_compress" ; then
@@ -5914,9 +5917,9 @@ cat >>$cf_edit_man <<CF_EOF
)
)
elif test "\$verb" = removing ; then
- test -f "\$cf_target" && (
- echo "\$verb \$cf_target"
- rm -f "\$cf_target"
+ test -f "\$t" && (
+ echo "\$verb \$t"
+ rm -f "\$t"
)
test -d "\$cf_subdir\${section}" &&
test -n "\$aliases" && (
@@ -5936,6 +5939,7 @@ cat >>$cf_edit_man <<CF_EOF
# echo ".hy 0"
cat \$TMP
fi
+done
;;
esac
done
--- configure
+++ configure 2021-06-07 07:18:38.420598827 +0000
@@ -5912,7 +5912,7 @@ echo $ECHO_N "checking for an rpath opti
fi
;;
(linux*|gnu*|k*bsd*-gnu|freebsd*)
- LD_RPATH_OPT="-Wl,-rpath,"
+ LD_RPATH_OPT="-Wl,-rpath-link,"
;;
(openbsd[2-9].*|mirbsd*)
LD_RPATH_OPT="-Wl,-rpath,"
@@ -7514,7 +7514,7 @@ echo "${ECHO_T}$with_pcre2" >&6
if test "x$with_pcre2" != xno ; then
cf_with_pcre2_ok=no
- for cf_with_pcre2 in libpcre2 libpcre2-posix libpcre
+ for cf_with_pcre2 in libpcre2 libpcre2-8 libpcre2-posix libpcre
do
if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists "$cf_with_pcre2"; then
@@ -14635,12 +14635,15 @@ cat >>$cf_edit_man <<CF_EOF
echo "? missing rename for \$cf_source"
cf_target="\$cf_source"
fi
- cf_target="\$cf_subdir\${section}/\${cf_target}"
-
CF_EOF
fi
cat >>$cf_edit_man <<CF_EOF
+for t in \$cf_target; do
+ t="\$cf_subdir\${section}/\${t}"
+CF_EOF
+
+cat >>$cf_edit_man <<CF_EOF
sed -f "$cf_man_alias" \\
CF_EOF
@@ -14650,7 +14653,7 @@ cat >>$cf_edit_man <<CF_EOF
CF_EOF
else
cat >>$cf_edit_man <<CF_EOF
- < "\$i" >\$TMP
+ < "\$i" | sed -f $srcdir/edit_man.sed >\$TMP
CF_EOF
fi
@@ -14690,7 +14693,7 @@ cat >>$cf_edit_man <<CF_EOF
mv \$TMP.$cf_so_strip \$TMP
fi
fi
- cf_target="\$cf_target.$cf_so_strip"
+ t="\$t.$cf_so_strip"
CF_EOF
fi
@@ -14699,23 +14702,23 @@ case "$MANPAGE_FORMAT" in
cat >>$cf_edit_man <<CF_EOF
if test "\$form" = format ; then
# BSDI installs only .0 suffixes in the cat directories
- cf_target="\`echo \$cf_target|sed -e 's/\\.[1-9]\\+[a-z]*/.0/'\`"
+ t="\`echo \$t|sed -e 's/\\.[1-9]\\+[a-z]*/.0/'\`"
fi
CF_EOF
;;
esac
cat >>$cf_edit_man <<CF_EOF
- suffix=\`basename "\$cf_target" | sed -e 's%^[^.]*%%'\`
+ suffix=\`basename "\$t" | sed -e 's%^[^.]*%%'\`
if test "\$verb" = installing ; then
- echo "\$verb \$cf_target"
- \$INSTALL_DATA \$TMP "\$cf_target"
+ echo "\$verb \$t"
+ \$INSTALL_DATA \$TMP "\$t"
test -d "\$cf_subdir\${section}" &&
test -n "\$aliases" && (
cd "\$cf_subdir\${section}" && (
- cf_source=\`echo "\$cf_target" |sed -e 's%^.*/\\([^/][^/]*/[^/][^/]*$\\)%\\1%'\`
+ cf_source=\`echo "\$t" |sed -e 's%^.*/\\([^/][^/]*/[^/][^/]*$\\)%\\1%'\`
test -n "$cf_so_strip" && cf_source=\`echo "\$cf_source" |sed -e 's%\\.$cf_so_strip\$%%'\`
- cf_target=\`basename "\$cf_target"\`
+ t=\`basename "\$t"\`
for cf_alias in \$aliases
do
if test "\$section" = 1 ; then
@@ -14724,7 +14727,7 @@ cat >>$cf_edit_man <<CF_EOF
if test "$MANPAGE_SYMLINKS" = yes ; then
if test -f "\$cf_alias\${suffix}" ; then
- if ( cmp -s "\$cf_target" "\$cf_alias\${suffix}" )
+ if ( cmp -s "\$t" "\$cf_alias\${suffix}" )
then
continue
fi
@@ -14734,18 +14737,18 @@ CF_EOF
case "x$LN_S" in
(*-f)
cat >>$cf_edit_man <<CF_EOF
- $LN_S "\$cf_target" "\$cf_alias\${suffix}"
+ $LN_S "\$t" "\$cf_alias\${suffix}"
CF_EOF
;;
(*)
cat >>$cf_edit_man <<CF_EOF
rm -f "\$cf_alias\${suffix}"
- $LN_S "\$cf_target" "\$cf_alias\${suffix}"
+ $LN_S "\$t" "\$cf_alias\${suffix}"
CF_EOF
;;
esac
cat >>$cf_edit_man <<CF_EOF
- elif test "\$cf_target" != "\$cf_alias\${suffix}" ; then
+ elif test "\$t" != "\$cf_alias\${suffix}" ; then
echo ".so \$cf_source" >\$TMP
CF_EOF
if test -n "$cf_compress" ; then
@@ -14765,9 +14768,9 @@ cat >>$cf_edit_man <<CF_EOF
)
)
elif test "\$verb" = removing ; then
- test -f "\$cf_target" && (
- echo "\$verb \$cf_target"
- rm -f "\$cf_target"
+ test -f "\$t" && (
+ echo "\$verb \$t"
+ rm -f "\$t"
)
test -d "\$cf_subdir\${section}" &&
test -n "\$aliases" && (
@@ -14787,6 +14790,7 @@ cat >>$cf_edit_man <<CF_EOF
# echo ".hy 0"
cat \$TMP
fi
+done
;;
esac
done
--- include/curses.h.in
+++ include/curses.h.in 2021-06-07 07:18:38.420598827 +0000
@@ -97,7 +97,7 @@
#ifdef __cplusplus
#else
-#if @HAVE_STDNORETURN_H@
+#if 0
#include <stdnoreturn.h>
#undef GCC_NORETURN
#define GCC_NORETURN _Noreturn
@@ -226,6 +226,9 @@ typedef @cf_cv_typeof_chtype@ chtype;
typedef @cf_cv_typeof_mmask_t@ mmask_t;
#endif
+#include <features.h>
+#include <sys/types.h>
+
/*
* We need FILE, etc. Include this before checking any feature symbols.
*/
--- include/termcap.h.in
+++ include/termcap.h.in 2021-06-07 07:18:38.420598827 +0000
@@ -47,6 +47,8 @@ extern "C"
{
#endif /* __cplusplus */
+#include <features.h>
+#include <termios.h>
#include <sys/types.h>
#undef NCURSES_OSPEED
--- include/tic.h
+++ include/tic.h 2021-06-07 07:18:38.420598827 +0000
@@ -237,12 +237,12 @@ struct user_table_entry
*/
/* out-of-band values for representing absent capabilities */
-#define ABSENT_BOOLEAN ((signed char)-1) /* 255 */
+#define ABSENT_BOOLEAN (-1) /* 255 */
#define ABSENT_NUMERIC (-1)
#define ABSENT_STRING (char *)0
/* out-of-band values for representing cancels */
-#define CANCELLED_BOOLEAN ((signed char)-2) /* 254 */
+#define CANCELLED_BOOLEAN (-2) /* 254 */
#define CANCELLED_NUMERIC (-2)
#define CANCELLED_STRING (char *)(-1)
--- man/man_db.renames
+++ man/man_db.renames 2021-06-07 07:18:38.420598827 +0000
@@ -164,6 +164,7 @@ term.7 term.7
term_variables.3x terminfo_variables.3ncurses
terminfo.5 terminfo.5
terminfo.\\\*n terminfo.5
+curs_terminfo.\\\*n terminfo.5
tic.1m tic.1
toe.1m toe.1
tput.1 tput.1
@@ -172,6 +173,7 @@ user_caps.5 user_caps.5
wresize.3x wresize.3ncurses
#
# Other:
+tack.1 tack.1
tack.1m tack.1
#
getty.1 getty.8
--- man/ncurses.3x
+++ man/ncurses.3x 2021-06-07 07:18:38.420598827 +0000
@@ -139,6 +139,10 @@ after the shell environment variable \fB
[See \fBterminfo\fR(\*n) for further details.]
.SS Datatypes
.PP
+Beware: the terminal your program is running may or may not have
+the features you expect. Ncurses makes no attempt to check available
+features in advance. This is upon the programmer.
+.PP
The \fBncurses\fR library permits manipulation of data structures,
called \fIwindows\fR, which can be thought of as two-dimensional
arrays of characters representing all or part of a CRT screen.
--- misc/gen-pkgconfig.in
+++ misc/gen-pkgconfig.in 2021-06-07 07:18:38.420598827 +0000
@@ -92,6 +92,9 @@ do
-specs*) # ignore linker specs-files which were used to build library
continue
;;
+ -Wl,--hash-size=*) # ignore hash as gold linker can not do
+ continue
+ ;;
-Wl,-z,*) # ignore flags used to manipulate shared image
continue
;;
@@ -183,6 +186,7 @@ do
LIBS="-l$name"
desc="ncurses @NCURSES_MAJOR@.@NCURSES_MINOR@"
+ deps=
reqs=
if [ $name = $MAIN_LIBRARY ]; then
@@ -193,9 +197,11 @@ do
desc="$desc terminal interface library"
elif expr $name : ".*${CXX_NAME}.*" >/dev/null ; then
reqs="$PANEL_LIBRARY${suffix}, $MENU_LIBRARY${suffix}, $FORM_LIBRARY${suffix}, $MAIN_LIBRARY${suffix}"
+ deps="-l$PANEL_LIBRARY -l$MENU_LIBRARY -l$FORM_LIBRARY -l$MAIN_LIBRARY"
desc="$desc add-on library"
else
reqs="$MAIN_LIBRARY${suffix}"
+ deps="-l$MAIN_LIBRARY"
desc="$desc add-on library"
fi
@@ -205,6 +211,8 @@ do
[ $NEED_TINFO != yes ] ; then
[ -n "$reqs" ] && reqs="$reqs, "
reqs="${reqs}${SUB_LIBRARY}${suffix}"
+ [ -n "$deps" ] && deps="$deps "
+ deps="${deps}-l${SUB_LIBRARY}"
fi
if [ $name = $MAIN_LIBRARY ]
--- misc/terminfo.src
+++ misc/terminfo.src 2021-06-07 07:18:38.424598755 +0000
@@ -305,7 +305,9 @@ dumb|80-column dumb tty,
am,
cols#80,
bel=^G, cr=\r, cud1=\n, ind=\n,
-unknown|unknown terminal type,
+unknown|switch|patch|unknown terminal type,
+ gn, use=dumb,
+net|network|arpanet|dialup|unknown network terminal type,
gn, use=dumb,
lpr|printer|line printer,
OTbs, hc, os,
@@ -1013,9 +1015,15 @@ linux-c|linux console 1.3.6+ for older n
# The 2.2.x kernels add a private mode that sets the cursor type; use that to
# get a block cursor for cvvis.
# reported by Frank Heckenbach <frank@g-n-u.de>.
+#
+# Do not use a block cursor, <werner@suse.de>
+# This because many programs do have a workaround for the long time
+# missed cvvis entry. A `\E[?1c' in civis will cause a visible but
+# zero high cusor ... re-add it for kernels 2.6.11+
+#
linux2.2|linux 2.2.x console,
civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
- cvvis=\E[?25h\E[?8c, use=linux-c-nc,
+ cvvis=\E[?25h\E[?0c, use=linux-c-nc,
# Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
# http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
@@ -1048,6 +1056,7 @@ linux2.6|linux 2.6.x console,
acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
yzz{{||}}~~,
enacs=\E)0, rmacs=^O,
+ cvvis=\E[?25h\E[?8c,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
%t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, use=linux2.2,
@@ -5402,8 +5411,26 @@ xterm-noapp|xterm with cursor keys in no
xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
lines#24, use=xterm-old,
+# For SuSE Linux: Werner Fink <werner@suse.de>
+# Note that the modern xterm does not use escape sequences
+# for the numbers on the numpad keys in case of switched
+# into application mode and with numlock enabled.
+# To test this, use `tput smkx' and `Ctrl-V + key stroke'
+xterm-suse|xterm terminal emulator (X.Org X11R7.7 Window System with SuSE LINUX),
+ kbs=\177, kdch1=\E[3~,
+ kDIV=\EOo, kMUL=\EOj, kMIN=\EOm, kPLS=\EOk,
+ kfnd=\E[1~, kslt=\E[4~,
+ use=xterm-new,
+
# This is xterm for ncurses.
xterm|xterm terminal emulator (X Window System),
+ use=xterm-suse,
+
+# xterm-debian is identical to xterm-new with the addition of a small
+# VT220-ism regarding the backspace and delete keys; this is mandated by
+# the keyboard configuration section of the Debian Policy Manual.
+xterm-debian|Debian xterm (backspace and delete changed),
+ kbs=\177, kdch1=\E[3~,
use=xterm-new,
# This entry assumes that xterm's handling of VT100 SI/SO is disabled by
@@ -5748,7 +5775,7 @@ xterms-sun|small (80x24) xterm with sunF
#### GNOME (VTE)
# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
-gnome-rh62|Gnome terminal,
+gnome-rh62|Gnome terminal on Red Hat,
bce,
kdch1=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
use=xterm-color,
@@ -6020,10 +6047,14 @@ mgt|Multi GNOME Terminal,
#### KDE
# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
# or not is debatable).
-kvt|KDE terminal,
+kvt-rh|KDE terminal,
bce, km@,
kdch1=^?, kend=\E[F, khome=\E[H, use=xterm-color,
+# This is kvt for SuSE because we do not support BrokenByDesign[tm].
+kvt|KDE terminal,
+ kdch1=\E[3~, use=kvt-rh,
+
# Konsole 1.0.1 (2001/11/25)
# (formerly known as kvt)
#
@@ -6275,7 +6306,7 @@ mlterm3|multi lingual terminal emulator,
mlterm2|multi lingual terminal emulator,
am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
colors#8, cols#80, it#8, lines#24, pairs#64,
- acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
@@ -6352,7 +6383,7 @@ rxvt-basic|rxvt terminal base (X Window
enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
ind=\n, is1=\E[?47l\E=\E[?1l,
- is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
+ is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^?,
kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
rmul=\E[24m,
@@ -6447,8 +6478,8 @@ rxvt-basic|rxvt terminal base (X Window
# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
rxvt+pcfkeys|fragment for PC-style fkeys,
kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
- kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kel=\E[8\^, kend=\E[8~, kf1=\E[11~,
+ kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kel=\E[8\^, kend=\E[8~, kf1=\E[11~,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
@@ -6538,6 +6569,38 @@ rxvt-cygwin-native|rxvt terminal emulato
\302x\263y\363z\362{\343|\330~\376,
use=rxvt-cygwin,
+# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
+# Updated: Özgür Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
+# Updated: Marc Lehmann <pcg@goof.com>, 17 Feb 2005
+# Updated: Marc Lehmann <schmorp@schmorp.de>, 04 Nov 2008: change init/reset sequences
+#
+rxvt-unicode|rxvt-unicode terminal (X Window System),
+ bw, ccc, hs, mc5i, npc, btns#5, colors#88, lm#0, ncv#0, pairs#256,
+ acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ dsl=\E]2;\007, ech=\E[%p1%dX, enacs=, flash=\E[?5h$<20/>\E[?5l,
+ fsl=^G, indn=\E[%p1%dS,
+ initc=\E]4;%p1%d;rgb\:%p2%{65535}%*%{1000}%/%4.4X/%p3%{65535}%*%{1000}%/%4.4X/%p4%{65535}%*%{1000}%/%4.4X\E\\,
+ is1=\E[!p,
+ is2=\E[r\E[m\E[2J\E[?7;25h\E[?1;3;4;5;6;9;66;1000;1001;1049l\E[4l,
+ kIC=\E2$, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, op=\E[39;49m,
+ rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E(B, rmam=\E[?7l,
+ rmcup=\E[r\E[?1049l, rmkx=\E[?1l\E>, rs1=\Ec,
+ rs2=\E[r\E[m\E[?7;25h\E[?1;3;4;5;6;9;66;1000;1001;1049l\E[4l,
+ s2ds=\E*B, s3ds=\E+B,
+ setab=\E[48;5;%p1%dm, setaf=\E[38;5;%p1%dm,
+ setb=%?%p1%{7}%>%t\E[48;5;%p1%dm%e\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m%;,
+ setf=%?%p1%{7}%>%t\E[38;5;%p1%dm%e\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m%;,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[m\E(B, sitm=\E[3m, smacs=\E(0, smam=\E[?7h,
+ smcup=\E[?1049h, smkx=\E[?1h\E=,
+ tsl=\E]2;, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
+ use=rxvt-basic,
+
+rxvt-unicode-256color|rxvt-unicode terminal with 256 colors (X Window System),
+ colors#256,
+ pairs#32767,
+ use=rxvt-unicode,
+
# This variant is supposed to work with rxvt 2.7.7 when compiled with
# NO_BRIGHTCOLOR defined. rxvt needs more work...
rxvt-16color|rxvt with 16 colors like aixterm,
@@ -6602,7 +6665,7 @@ Eterm|Eterm-color|Eterm with xterm-style
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E[?47l\E>\E[?1l,
is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
- kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
+ kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^?,
kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
@@ -7640,7 +7703,7 @@ pty|4bsd pseudo teletype,
# https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
#
# The codes supported by the term.el terminal emulation in GNU Emacs 19.30
-eterm|gnu emacs term.el terminal emulation,
+eterm-19|gnu emacs term.el terminal emulation,
am, mir, xenl,
cols#80, lines#24,
bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
@@ -7653,6 +7716,13 @@ eterm|gnu emacs term.el terminal emulati
rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
smul=\E[4m,
+eterm|emacs|gnu emacs term.el terminal emulation,
+ colors#8, pairs#64,
+ invis=\E[8m, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kend=\E[4~,
+ khome=\E[1~, knp=\E[6~, kpp=\E[5~,
+ setab=\E[%p1%{40}%+%dm, setaf=\E[%p1%{30}%+%dm,
+ use=eterm-19,
# The codes supported by the term.el terminal emulation in GNU Emacs 22.2
eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
@@ -7780,7 +7850,7 @@ screen|VT 100/ANSI X3.64 virtual termina
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
enacs=\E(B\E)0, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
- ind=\n, indn=\E[%p1%dS, is2=\E)0, kbs=^H, kcbt=\E[Z,
+ ind=\n, indn=\E[%p1%dS, is2=\E)0, kbs=^?, kcbt=\E[Z,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
@@ -7900,6 +7970,13 @@ screen.xterm-xfree86|screen.xterm-new|sc
use=xterm+x11mouse, use=xterm-new,
#:screen.xterm|screen for modern xterm,
#: use=screen.xterm-new,
+screen.xterm|screen customized for modern xterm,
+ bce@, bw,
+ invis@, kIC@, kNXT@, kPRV@, meml@, memu@, rep@,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
+ %t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
+ E3@, use=screen+italics, use=screen+fkeys,
+ use=xterm+x11mouse, use=xterm-suse,
# xterm-r6 does not really support khome/kend unless it is propped up by
# the translations resource.
screen.xterm-r6|screen customized for X11R6 xterm,
@@ -7987,7 +8064,7 @@ screen2|old VT 100/ANSI X3.64 virtual te
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
- il1=\E[L, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ il1=\E[L, ind=\n, kbs=^?, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
nel=\r\n, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
@@ -9923,7 +10000,7 @@ hp700-wy|HP700/41 emulating wyse30,
ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
-hp70092|hp70092a|hp70092A|HP 700/92,
+hp70092|hp70092a|hp70092A|70092|HP 700/92,
am, da, db, xhp,
cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
@@ -17570,7 +17647,7 @@ ibm3101|i3101|IBM 3101-10,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EI, home=\EH, hts=\E0, ind=\n, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, nel=\r\n, tbc=\EH,
-ibm3151|IBM 3151 display,
+ibm3151|i3151|IBM 3151 display,
is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
@@ -17828,7 +17905,7 @@ lft|lft-pc850|LFT-PC850|IBM LFT PC850 De
tbc=\E[3g, use=ecma+index,
# "Megapel" refers to the display adapter, which was used with the IBM RT
# aka IBM 6150.
-ibm5081|hft|IBM Megapel Color display,
+ibm5081|ibmmpel|hft|IBM Megapel Color display,
acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
--- ncurses/Makefile.in
+++ ncurses/Makefile.in 2021-06-07 07:18:38.424598755 +0000
@@ -240,7 +240,7 @@ $(DESTDIR)$(libdir) :
../lib : ; mkdir $@
./fallback.c : $(tinfo)/MKfallback.sh
- $(SHELL) -e $(tinfo)/MKfallback.sh $(TERMINFO) $(TERMINFO_SRC) "$(TIC_PATH)" "$(INFOCMP_PATH)" $(FALLBACK_LIST) >$@
+ $(SHELL) -e $(srcdir)/run_cmd.sh $(tinfo)/MKfallback.sh $(TERMINFO) $(TERMINFO_SRC) "$(TIC_PATH)" "$(INFOCMP_PATH)" $(FALLBACK_LIST) >$@
./lib_gen.c : $(base)/MKlib_gen.sh ../include/curses.h
$(SHELL) -e $(base)/MKlib_gen.sh "$(CPP) $(CPPFLAGS)" "$(AWK)" generated <../include/curses.h >$@
--- ncurses/run_cmd.sh
+++ ncurses/run_cmd.sh 2021-06-07 07:18:38.424598755 +0000
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+PATH=$PWD/../progs:$PATH
+if test -n "$LD_LIBRARY_PATH"; then
+ LD_LIBRARY_PATH="$PWD/../lib:$LD_LIBRARY_PATH"
+else
+ LD_LIBRARY_PATH="$PWD/../lib"
+fi
+export PATH LD_LIBRARY_PATH
+
+exec ${1+"$@"}
--- ncurses/tinfo/MKfallback.sh
+++ ncurses/tinfo/MKfallback.sh 2021-06-07 07:18:38.424598755 +0000
@@ -66,14 +66,22 @@ if test $# != 0 ; then
TERMINFO=`pwd`/$tmp_info
export TERMINFO
+ test -d "$TERMINFO" || mkdir -p "$TERMINFO"
+
TERMINFO_DIRS=$TERMINFO:$terminfo_dir
export TERMINFO_DIRS
- "$tic_path" -x "$terminfo_src" >&2
+ "$tic_path" -o "$TERMINFO" -x "$terminfo_src" >&2
else
tmp_info=
fi
+if test -n "$TERMINFO" -a -d "$TERMINFO" ; then
+ infocmp_args="-v1 -A $TERMINFO"
+else
+ infocmp_args="-v1"
+fi
+
cat <<EOF
/* This file was generated by $0 */
@@ -95,7 +103,7 @@ EOF
for x in "$@"
do
echo "/* $x */"
- "$infocmp_path" -E "$x" | sed -e 's/\<short\>/NCURSES_INT2/g'
+ "$infocmp_path" $infocmp_args -E "$x" | sed -e 's/\<short\>/NCURSES_INT2/g'
done
cat <<EOF
@@ -106,7 +114,7 @@ EOF
for x in "$@"
do
echo "$comma /* $x */"
- "$infocmp_path" -e "$x"
+ "$infocmp_path" $infocmp_args -e "$x"
comma=","
done
--- ncurses/tinfo/lib_setup.c
+++ ncurses/tinfo/lib_setup.c 2021-06-07 07:18:38.424598755 +0000
@@ -613,6 +613,9 @@ _nc_locale_breaks_acs(TERMINAL *termp)
} else if ((value = tigetnum("U8")) >= 0) {
result = value; /* use extension feature */
} else if ((env = getenv("TERM")) != 0) {
+ char *yast = getenv("YAST_DOES_ACS");
+ if (yast != 0)
+ return 0; /* YaST uses always correct font mappings */
if (strstr(env, "linux")) {
result = 1; /* always broken */
} else if (strstr(env, "screen") != 0
--- progs/Makefile.in
+++ progs/Makefile.in 2021-06-07 07:18:38.424598755 +0000
@@ -101,7 +101,7 @@ CFLAGS_LIBTOOL = $(CCFLAGS)
CFLAGS_NORMAL = $(CCFLAGS) -DNCURSES_STATIC
CFLAGS_DEBUG = $(CCFLAGS) -DNCURSES_STATIC @CC_G_OPT@ -DTRACE
CFLAGS_PROFILE = $(CCFLAGS) -DNCURSES_STATIC -pg
-CFLAGS_SHARED = $(CCFLAGS) @CC_SHARED_OPTS@
+CFLAGS_SHARED = $(CCFLAGS) -fPIE
CFLAGS_DEFAULT = $(CFLAGS_@DFT_UPR_MODEL@)
@@ -118,7 +118,7 @@ LDFLAGS_LIBTOOL = $(LDFLAGS) $(CFLAGS_LI
LDFLAGS_NORMAL = $(LDFLAGS) $(CFLAGS_NORMAL)
LDFLAGS_DEBUG = $(LDFLAGS) $(CFLAGS_DEBUG)
LDFLAGS_PROFILE = $(LDFLAGS) $(CFLAGS_PROFILE)
-LDFLAGS_SHARED = $(LDFLAGS) $(CFLAGS_SHARED) @LD_SHARED_OPTS@
+LDFLAGS_SHARED = $(LDFLAGS) $(CFLAGS_SHARED) -pie
LDFLAGS_DEFAULT = $(LDFLAGS_@DFT_UPR_MODEL@)
--- test/test.priv.h
+++ test/test.priv.h 2021-06-07 07:18:38.424598755 +0000
@@ -1037,12 +1037,12 @@ extern char *_nc_strstr(const char *, co
#endif
/* out-of-band values for representing absent capabilities */
-#define ABSENT_BOOLEAN ((signed char)-1) /* 255 */
+#define ABSENT_BOOLEAN (char)-1) /* 255 */
#define ABSENT_NUMERIC (-1)
#define ABSENT_STRING (char *)0
/* out-of-band values for representing cancels */
-#define CANCELLED_BOOLEAN ((signed char)-2) /* 254 */
+#define CANCELLED_BOOLEAN (-2) /* 254 */
#define CANCELLED_NUMERIC (-2)
#define CANCELLED_STRING (char *)(-1)
--- test/tracemunch
+++ test/tracemunch 2021-06-07 07:18:38.428598683 +0000
@@ -1,4 +1,4 @@
-#!/usr/bin/env perl
+#!/usr/bin/perl
# $Id: tracemunch,v 1.40 2021/02/13 19:29:12 tom Exp $
##############################################################################
# Copyright 2018-2020,2021 Thomas E. Dickey #