rpm/openssh
SHA256
1
0
Fork 0
forked from pool/openssh
Code Pull Requests Activity
04d08a5024
openssh/openssh-reenable-dh-group14-sha1-default.patch

42 lines
1.5 KiB
Diff
Raw Normal View History

Accepting request 960041 from home:hpjansson:openssh-tw - Version update to 8.9p1: = Security * sshd(8): fix an integer overflow in the user authentication path that, in conjunction with other logic errors, could have yielded unauthenticated access under difficult to exploit conditions. This situation is not exploitable because of independent checks in the privilege separation monitor. Privilege separation has been enabled by default in since openssh-3.2.2 (released in 2002) and has been mandatory since openssh-7.5 (released in 2017). Moreover, portable OpenSSH has used toolchain features available in most modern compilers to abort on signed integer overflow since openssh-6.5 (released in 2014). Thanks to Malcolm Stagg for finding and reporting this bug. = Potentially-incompatible changes * sshd(8), portable OpenSSH only: this release removes in-built support for MD5-hashed passwords. If you require these on your system then we recommend linking against libxcrypt or similar. * This release modifies the FIDO security key middleware interface and increments SSH_SK_VERSION_MAJOR. = New features * ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for restricting forwarding and use of keys added to ssh-agent(1) A detailed description of the feature is available at https://www.openssh.com/agent-restrict.html and the protocol extensions are documented in the PROTOCOL and PROTOCOL.agent files in the source release. * ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the default KEXAlgorithms list (after the ECDH methods but before the prime-group DH ones). The next release of OpenSSH is likely to make this key exchange the default method. * ssh-keygen(1): when downloading resident keys from a FIDO token, pass back the user ID that was used when the key was created and append it to the filename the key is written to (if it is not the default). Avoids keys being clobbered if the user created multiple resident keys with the same application string but different user IDs. * ssh-keygen(1), ssh(1), ssh-agent(1): better handling for FIDO keys on tokens that provide user verification (UV) on the device itself, including biometric keys, avoiding unnecessary PIN prompts. * ssh-keygen(1): add "ssh-keygen -Y match-principals" operation to perform matching of principals names against an allowed signers file. To be used towards a TOFU model for SSH signatures in git. * ssh-add(1), ssh-agent(1): allow pin-required FIDO keys to be added to ssh-agent(1). $SSH_ASKPASS will be used to request the PIN at authentication time. * ssh-keygen(1): allow selection of hash at sshsig signing time (either sha512 (default) or sha256). * ssh(1), sshd(8): read network data directly to the packet input buffer instead of indirectly via a small stack buffer. Provides a modest performance improvement. * ssh(1), sshd(8): read data directly to the channel input buffer, providing a similar modest performance improvement. * ssh(1): extend the PubkeyAuthentication configuration directive to accept yes|no|unbound|host-bound to allow control over one of the protocol extensions used to implement agent-restricted keys. = Bugfixes * sshd(8): document that CASignatureAlgorithms, ExposeAuthInfo and PubkeyAuthOptions can be used in a Match block. PR277. * sshd(8): fix possible string truncation when constructing paths to .rhosts/.shosts files with very long user home directory names. * ssh-keysign(1): unbreak for KEX algorithms that use SHA384/512 exchange hashes * ssh(1): don't put the TTY into raw mode when SessionType=none, avoids ^C being unable to kill such a session. bz3360 * scp(1): fix some corner-case bugs in SFTP-mode handling of ~-prefixed paths. * ssh(1): unbreak hostbased auth using RSA keys. Allow ssh(1) to select RSA keys when only RSA/SHA2 signature algorithms are configured (this is the default case). Previously RSA keys were not being considered in the default case. * ssh-keysign(1): make ssh-keysign use the requested signature algorithm and not the default for the key type. Part of unbreaking hostbased auth for RSA/SHA2 keys. * ssh(1): stricter UpdateHostkey signature verification logic on the client- side. Require RSA/SHA2 signatures for RSA hostkeys except when RSA/SHA1 was explicitly negotiated during initial KEX; bz3375 * ssh(1), sshd(8): fix signature algorithm selection logic for UpdateHostkeys on the server side. The previous code tried to prefer RSA/SHA2 for hostkey proofs of RSA keys, but missed some cases. This will use RSA/SHA2 signatures for RSA keys if the client proposed these algorithms in initial KEX. bz3375 * All: convert all uses of select(2)/pselect(2) to poll(2)/ppoll(2). This includes the mainloops in ssh(1), ssh-agent(1), ssh-agent(1) and sftp-server(8), as well as the sshd(8) listen loop and all other FD read/writability checks. On platforms with missing or broken poll(2)/ppoll(2) syscalls a select(2)-based compat shim is available. * ssh-keygen(1): the "-Y find-principals" command was verifying key validity when using ca certs but not with simple key lifetimes within the allowed signers file. * ssh-keygen(1): make sshsig verify-time argument parsing optional * sshd(8): fix truncation in rhosts/shosts path construction. * ssh(1), ssh-agent(1): avoid xmalloc(0) for PKCS#11 keyid for ECDSA keys (we already did this for RSA keys). Avoids fatal errors for PKCS#11 libraries that return empty keyid, e.g. Microchip ATECC608B "cryptoauthlib"; bz#3364 * ssh(1), ssh-agent(1): improve the testing of credentials against inserted FIDO: ask the token whether a particular key belongs to it in cases where the token supports on-token user-verification (e.g. biometrics) rather than just assuming that it will accept it. Will reduce spurious "Confirm user presence" notifications for key handles that relate to FIDO keys that are not currently inserted in at least some cases. bz3366 * ssh(1), sshd(8): correct value for IPTOS_DSCP_LE. It needs to allow for the preceding two ECN bits. bz#3373 * ssh-keygen(1): add missing -O option to usage() for the "-Y sign" option. * ssh-keygen(1): fix a NULL deref when using the find-principals function, when matching an allowed_signers line that contains a namespace restriction, but no restriction specified on the command-line * ssh-agent(1): fix memleak in process_extension(); oss-fuzz issue #42719 * ssh(1): suppress "Connection to xxx closed" messages when LogLevel is set to "error" or above. bz3378 * ssh(1), sshd(8): use correct zlib flags when inflate(3)-ing compressed packet data. bz3372 * scp(1): when recursively transferring files in SFTP mode, create the destination directory if it doesn't already exist to match scp(1) in legacy RCP mode behaviour. * scp(1): many improvements in error message consistency between scp(1) in SFTP mode vs legacy RCP mode. * sshd(8): fix potential race in SIGTERM handling PR289 * ssh(1), ssh(8): since DSA keys are deprecated, move them to the end of the default list of public keys so that they will be tried last. PR295 * ssh-keygen(1): allow 'ssh-keygen -Y find-principals' to match wildcard principals in allowed_signers files = Portability * ssh(1), sshd(8): don't trust closefrom(2) on Linux. glibc's implementation does not work in a chroot when the kernel does not have close_range(2). It tries to read from /proc/self/fd and when that fails dies with an assertion of sorts. Instead, call close_range(2) directly from our compat code and fall back if that fails. bz#3349, * OS X poll(2) is broken; use compat replacement. For character- special devices like /dev/null, Darwin's poll(2) returns POLLNVAL when polled with POLLIN. Apparently this is Apple bug 3710161 - not public but a websearch will find other OSS projects rediscovering it periodically since it was first identified in 2005. * Correct handling of exceptfds/POLLPRI in our select(2)-based poll(2)/ppoll(2) compat implementation. * Cygwin: correct checking of mbstowcs() return value. * Add a basic SECURITY.md that refers people to the openssh.com website. * Enable additional compiler warnings and toolchain hardening flags, including -Wbitwise-instead-of-logical, -Wmisleading-indentation, -fzero-call-used-regs and -ftrivial-auto-var-init. * HP/UX. Use compat getline(3) on HP-UX 10.x, where the libc version is not reliable. - Rebased patches: * openssh-7.7p1-ldap.patch * openssh-8.0p1-gssapi-keyex.patch * openssh-8.1p1-audit.patch * openssh-8.4p1-vendordir.patch * openssh-reenable-dh-group14-sha1-default.patch OBS-URL: https://build.opensuse.org/request/show/960041 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=237
2022-03-08 08:49:22 +01:00
Index: openssh-8.9p1/myproposal.h
Accepting request 922068 from home:hpjansson:branches:network - Version upgrade to 8.8p1 * No changes for askpass, see main package changelog for details - Version update to 8.8p1: = Security * sshd(8) from OpenSSH 6.2 through 8.7 failed to correctly initialise supplemental groups when executing an AuthorizedKeysCommand or AuthorizedPrincipalsCommand, where a AuthorizedKeysCommandUser or AuthorizedPrincipalsCommandUser directive has been set to run the command as a different user. Instead these commands would inherit the groups that sshd(8) was started with. Depending on system configuration, inherited groups may allow AuthorizedKeysCommand/AuthorizedPrincipalsCommand helper programs to gain unintended privilege. Neither AuthorizedKeysCommand nor AuthorizedPrincipalsCommand are enabled by default in sshd_config(5). = Potentially-incompatible changes * This release disables RSA signatures using the SHA-1 hash algorithm by default. This change has been made as the SHA-1 hash algorithm is cryptographically broken, and it is possible to create chosen-prefix hash collisions for <USD$50K. For most users, this change should be invisible and there is no need to replace ssh-rsa keys. OpenSSH has supported RFC8332 RSA/SHA-256/512 signatures since release 7.2 and existing ssh-rsa keys will automatically use the stronger algorithm where possible. Incompatibility is more likely when connecting to older SSH implementations that have not been upgraded or have not closely tracked improvements in the SSH protocol. For these cases, it may be necessary to selectively re-enable RSA/SHA1 to allow connection and/or user authentication via the HostkeyAlgorithms and PubkeyAcceptedAlgorithms options. = New features * ssh(1): allow the ssh_config(5) CanonicalizePermittedCNAMEs directive to accept a "none" argument to specify the default behaviour. = Bugfixes * scp(1): when using the SFTP protocol, continue transferring files after a transfer error occurs, better matching original scp/rcp behaviour. * ssh(1): fixed a number of memory leaks in multiplexing, * ssh-keygen(1): avoid crash when using the -Y find-principals command. * A number of documentation and manual improvements, including bz#3340, PR139, PR215, PR241, PR257 - Additional changes from 8.7p1 release: = Potentially-incompatible changes * scp(1): this release changes the behaviour of remote to remote copies (e.g. "scp host-a:/path host-b:") to transfer through the local host by default. This was previously available via the -3 flag. This mode avoids the need to expose credentials on the origin hop, avoids triplicate interpretation of filenames by the shell (by the local system, the copy origin and the destination) and, in conjunction with the SFTP support for scp(1) mentioned below, allows use of all authentication methods to the remote hosts (previously, only non-interactive methods could be used). A -R flag has been added to select the old behaviour. * ssh(1)/sshd(8): both the client and server are now using a stricter configuration file parser. The new parser uses more shell-like rules for quotes, space and escape characters. It is also more strict in rejecting configurations that include options lacking arguments. Previously some options (e.g. DenyUsers) could appear on a line with no subsequent arguments. This release will reject such configurations. The new parser will also reject configurations with unterminated quotes and multiple '=' characters after the option name. * ssh(1): when using SSHFP DNS records for host key verification, ssh(1) will verify all matching records instead of just those with the specific signature type requested. This may cause host key verification problems if stale SSHFP records of a different or legacy signature type exist alongside other records for a particular host. bz#3322 * ssh-keygen(1): when generating a FIDO key and specifying an explicit attestation challenge (using -Ochallenge), the challenge will now be hashed by the builtin security key middleware. This removes the (undocumented) requirement that challenges be exactly 32 bytes in length and matches the expectations of libfido2. * sshd(8): environment="..." directives in authorized_keys files are now first-match-wins and limited to 1024 discrete environment variable names. = New features * scp(1): experimental support for transfers using the SFTP protocol as a replacement for the venerable SCP/RCP protocol that it has traditionally used. SFTP offers more predictable filename handling and does not require expansion of glob(3) patterns via the shell on the remote side. * sftp-server(8): add a protocol extension to support expansion of ~/ and ~user/ prefixed paths. This was added to support these paths when used by scp(1) while in SFTP mode. * ssh(1): add a ForkAfterAuthentication ssh_config(5) counterpart to the ssh(1) -f flag. GHPR231 * ssh(1): add a StdinNull directive to ssh_config(5) that allows the config file to do the same thing as -n does on the ssh(1) command- line. GHPR231 * ssh(1): add a SessionType directive to ssh_config, allowing the configuration file to offer equivalent control to the -N (no session) and -s (subsystem) command-line flags. GHPR231 * ssh-keygen(1): allowed signers files used by ssh-keygen(1) signatures now support listing key validity intervals alongside they key, and ssh-keygen(1) can optionally check during signature verification whether a specified time falls inside this interval. This feature is intended for use by git to support signing and verifying objects using ssh keys. * ssh-keygen(8): support printing of the full public key in a sshsig signature via a -Oprint-pubkey flag. = Bugfixes * ssh(1)/sshd(8): start time-based re-keying exactly on schedule in the client and server mainloops. Previously the re-key timeout could expire but re-keying would not start until a packet was sent or received, causing a spin in select() if the connection was quiescent. * ssh-keygen(1): avoid Y2038 problem in printing certificate validity lifetimes. Dates past 2^31-1 seconds since epoch were displayed incorrectly on some platforms. bz#3329 * scp(1): allow spaces to appear in usernames for local to remote and scp -3 remote to remote copies. bz#1164 * ssh(1)/sshd(8): remove references to ChallengeResponseAuthentication in favour of KbdInteractiveAuthentication. The former is what was in SSHv1, the latter is what is in SSHv2 (RFC4256) and they were treated as somewhat but not entirely equivalent. We retain the old name as a deprecated alias so configuration files continue to work as well as a reference in the man page for people looking for it. bz#3303 * ssh(1)/ssh-add(1)/ssh-keygen(1): fix decoding of X.509 subject name when extracting a key from a PKCS#11 certificate. bz#3327 * ssh(1): restore blocking status on stdio fds before close. ssh(1) needs file descriptors in non-blocking mode to operate but it was not restoring the original state on exit. This could cause problems with fds shared with other programs via the shell, bz#3280 and GHPR246 * ssh(1)/sshd(8): switch both client and server mainloops from select(3) to pselect(3). Avoids race conditions where a signal may arrive immediately before select(3) and not be processed until an event fires. bz#2158 * ssh(1): sessions started with ControlPersist were incorrectly executing a shell when the -N (no shell) option was specified. bz#3290 * ssh(1): check if IPQoS or TunnelDevice are already set before overriding. Prevents values in config files from overriding values supplied on the command line. bz#3319 * ssh(1): fix debug message when finding a private key to match a certificate being attempted for user authentication. Previously it would print the certificate's path, whereas it was supposed to be showing the private key's path. GHPR247 * sshd(8): match host certificates against host public keys, not private keys. Allows use of certificates with private keys held in a ssh-agent. bz#3524 * ssh(1): add a workaround for a bug in OpenSSH 7.4 sshd(8), which allows RSA/SHA2 signatures for public key authentication but fails to advertise this correctly via SSH2_MSG_EXT_INFO. This causes clients of these server to incorrectly match PubkeyAcceptedAlgorithmse and potentially refuse to offer valid keys. bz#3213 * sftp(1)/scp(1): degrade gracefully if a sftp-server offers the limits@openssh.com extension but fails when the client tries to invoke it. bz#3318 * ssh(1): allow ssh_config SetEnv to override $TERM, which is otherwise handled specially by the protocol. Useful in ~/.ssh/config to set TERM to something generic (e.g. "xterm" instead of "xterm-256color") for destinations that lack terminfo entries. * sftp-server(8): the limits@openssh.com extension was incorrectly marked as an operation that writes to the filesystem, which made it unavailable in sftp-server read-only mode. bz#3318 * ssh(1): fix SEGV in UpdateHostkeys debug() message, triggered when the update removed more host keys than remain present. * Many manual page fixes. - Additional changes from 8.6p1 release: = Security * sshd(8): OpenSSH 8.5 introduced the LogVerbose keyword. When this option was enabled with a set of patterns that activated logging in code that runs in the low-privilege sandboxed sshd process, the log messages were constructed in such a way that printf(3) format strings could effectively be specified the low-privilege code. = New features * sftp-server(8): add a new limits@openssh.com protocol extension that allows a client to discover various server limits, including maximum packet size and maximum read/write length. * sftp(1): use the new limits@openssh.com extension (when available) to select better transfer lengths in the client. * sshd(8): Add ModuliFile keyword to sshd_config to specify the location of the "moduli" file containing the groups for DH-GEX. * unit tests: Add a TEST_SSH_ELAPSED_TIMES environment variable to enable printing of the elapsed time in seconds of each test. = Bugfixes * ssh_config(5), sshd_config(5): sync CASignatureAlgorithms lists in manual pages with the current default. GHPR174 * ssh(1): ensure that pkcs11_del_provider() is called before exit. GHPR234 * ssh(1), sshd(8): fix problems in string->argv conversion. Multiple backslashes were not being dequoted correctly and quoted space in the middle of a string was being incorrectly split. GHPR223 * ssh(1): return non-zero exit status when killed by signal; bz#3281 * sftp-server(8): increase maximum SSH2_FXP_READ to match the maximum packet size. Also handle zero-length reads that are not explicitly banned by the spec. - Additional changes from 8.5p1 release: = Security * ssh-agent(1): fixed a double-free memory corruption that was introduced in OpenSSH 8.2 . We treat all such memory faults as potentially exploitable. This bug could be reached by an attacker with access to the agent socket. = Potentially-incompatible changes * ssh(1), sshd(8): this release changes the first-preference signature algorithm from ECDSA to ED25519. * ssh(1), sshd(8): set the TOS/DSCP specified in the configuration for interactive use prior to TCP connect. The connection phase of the SSH session is time-sensitive and often explicitly interactive. The ultimate interactive/bulk TOS/DSCP will be set after authentication completes. * ssh(1), sshd(8): remove the pre-standardization cipher rijndael-cbc@lysator.liu.se. It is an alias for aes256-cbc before it was standardized in RFC4253 (2006), has been deprecated and disabled by default since OpenSSH 7.2 (2016) and was only briefly documented in ssh.1 in 2001. * ssh(1), sshd(8): update/replace the experimental post-quantum hybrid key exchange method based on Streamlined NTRU Prime coupled with X25519. The previous sntrup4591761x25519-sha512@tinyssh.org method is replaced with sntrup761x25519-sha512@openssh.com. * ssh(1): disable CheckHostIP by default. It provides insignificant benefits while making key rotation significantly more difficult, especially for hosts behind IP-based load-balancers. = New features * ssh(1): this release enables UpdateHostkeys by default subject to some conservative preconditions: - The key was matched in the UserKnownHostsFile (and not in the GlobalKnownHostsFile). - The same key does not exist under another name. - A certificate host key is not in use. - known_hosts contains no matching wildcard hostname pattern. - VerifyHostKeyDNS is not enabled. - The default UserKnownHostsFile is in use. * ssh(1), sshd(8): add a new LogVerbose configuration directive for that allows forcing maximum debug logging by file/function/line pattern-lists. * ssh(1): when prompting the user to accept a new hostkey, display any other host names/addresses already associated with the key. * ssh(1): allow UserKnownHostsFile=none to indicate that no known_hosts file should be used to identify host keys. * ssh(1): add a ssh_config KnownHostsCommand option that allows the client to obtain known_hosts data from a command in addition to the usual files. * ssh(1): add a ssh_config PermitRemoteOpen option that allows the client to restrict the destination when RemoteForward is used with SOCKS. * ssh(1): for FIDO keys, if a signature operation fails with a "incorrect PIN" reason and no PIN was initially requested from the user, then request a PIN and retry the operation. This supports some biometric devices that fall back to requiring PIN when reading of the biometric failed, and devices that require PINs for all hosted credentials. * sshd(8): implement client address-based rate-limiting via new sshd_config(5) PerSourceMaxStartups and PerSourceNetBlockSize directives that provide more fine-grained control on a per-origin address basis than the global MaxStartups limit. = Bugfixes * ssh(1): Prefix keyboard interactive prompts with "(user@host)" to make it easier to determine which connection they are associated with in cases like scp -3, ProxyJump, etc. bz#3224 * sshd(8): fix sshd_config SetEnv directives located inside Match blocks. GHPR201 * ssh(1): when requesting a FIDO token touch on stderr, inform the user once the touch has been recorded. * ssh(1): prevent integer overflow when ridiculously large ConnectTimeout values are specified, capping the effective value (for most platforms) at 24 days. bz#3229 * ssh(1): consider the ECDSA key subtype when ordering host key algorithms in the client. * ssh(1), sshd(8): rename the PubkeyAcceptedKeyTypes keyword to PubkeyAcceptedAlgorithms. The previous name incorrectly suggested that it control allowed key algorithms, when this option actually specifies the signature algorithms that are accepted. The previous name remains available as an alias. bz#3253 * ssh(1), sshd(8): similarly, rename HostbasedKeyTypes (ssh) and HostbasedAcceptedKeyTypes (sshd) to HostbasedAcceptedAlgorithms. * sftp-server(8): add missing lsetstat@openssh.com documentation and advertisement in the server's SSH2_FXP_VERSION hello packet. * ssh(1), sshd(8): more strictly enforce KEX state-machine by banning packet types once they are received. Fixes memleak caused by duplicate SSH2_MSG_KEX_DH_GEX_REQUEST (oss-fuzz #30078). * sftp(1): allow the full range of UIDs/GIDs for chown/chgrp on 32bit platforms instead of being limited by LONG_MAX. bz#3206 * Minor man page fixes (capitalization, commas, etc.) bz#3223 * sftp(1): when doing an sftp recursive upload or download of a read-only directory, ensure that the directory is created with write and execute permissions in the interim so that the transfer can actually complete, then set the directory permission as the final step. bz#3222 * ssh-keygen(1): document the -Z, check the validity of its argument earlier and provide a better error message if it's not correct. bz#2879 * ssh(1): ignore comments at the end of config lines in ssh_config, similar to what we already do for sshd_config. bz#2320 * sshd_config(5): mention that DisableForwarding is valid in a sshd_config Match block. bz3239 * sftp(1): fix incorrect sorting of "ls -ltr" under some circumstances. bz3248. * ssh(1), sshd(8): fix potential integer truncation of (unlikely) timeout values. bz#3250 * ssh(1): make hostbased authentication send the signature algorithm in its SSH2_MSG_USERAUTH_REQUEST packets instead of the key type. This make HostbasedAcceptedAlgorithms do what it is supposed to - filter on signature algorithm and not key type. - Rebased patches: * openssh-7.7p1-IPv6_X_forwarding.patch * openssh-7.7p1-X11_trusted_forwarding.patch * openssh-7.7p1-X_forward_with_disabled_ipv6.patch * openssh-7.7p1-cavstest-ctr.patch * openssh-7.7p1-cavstest-kdf.patch * openssh-7.7p1-disable_openssl_abi_check.patch * openssh-7.7p1-eal3.patch * openssh-7.7p1-enable_PAM_by_default.patch * openssh-7.7p1-fips.patch * openssh-7.7p1-fips_checks.patch * openssh-7.7p1-host_ident.patch * openssh-7.7p1-hostname_changes_when_forwarding_X.patch * openssh-7.7p1-ldap.patch * openssh-7.7p1-no_fork-no_pid_file.patch * openssh-7.7p1-pam_check_locks.patch * openssh-7.7p1-pts_names_formatting.patch * openssh-7.7p1-remove_xauth_cookies_on_exit.patch * openssh-7.7p1-seccomp_ipc_flock.patch * openssh-7.7p1-seccomp_stat.patch * openssh-7.7p1-send_locale.patch * openssh-7.7p1-sftp_force_permissions.patch * openssh-7.7p1-sftp_print_diagnostic_messages.patch * openssh-7.7p1-systemd-notify.patch * openssh-7.9p1-keygen-preserve-perms.patch * openssh-7.9p1-revert-new-qos-defaults.patch * openssh-8.0p1-gssapi-keyex.patch * openssh-8.1p1-audit.patch * openssh-8.1p1-seccomp-clock_gettime64.patch * openssh-8.1p1-seccomp-clock_nanosleep.patch * openssh-8.1p1-seccomp-clock_nanosleep_time64.patch * openssh-8.1p1-use-openssl-kdf.patch * openssh-8.4p1-vendordir.patch * openssh-fips-ensure-approved-moduli.patch * openssh-link-with-sk.patch * openssh-reenable-dh-group14-sha1-default.patch * openssh-whitelist-syscalls.patch - Removed openssh-fix-ssh-copy-id.patch (fixed upstream). OBS-URL: https://build.opensuse.org/request/show/922068 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=235
2021-10-07 10:06:58 +02:00
===================================================================
Accepting request 960041 from home:hpjansson:openssh-tw - Version update to 8.9p1: = Security * sshd(8): fix an integer overflow in the user authentication path that, in conjunction with other logic errors, could have yielded unauthenticated access under difficult to exploit conditions. This situation is not exploitable because of independent checks in the privilege separation monitor. Privilege separation has been enabled by default in since openssh-3.2.2 (released in 2002) and has been mandatory since openssh-7.5 (released in 2017). Moreover, portable OpenSSH has used toolchain features available in most modern compilers to abort on signed integer overflow since openssh-6.5 (released in 2014). Thanks to Malcolm Stagg for finding and reporting this bug. = Potentially-incompatible changes * sshd(8), portable OpenSSH only: this release removes in-built support for MD5-hashed passwords. If you require these on your system then we recommend linking against libxcrypt or similar. * This release modifies the FIDO security key middleware interface and increments SSH_SK_VERSION_MAJOR. = New features * ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for restricting forwarding and use of keys added to ssh-agent(1) A detailed description of the feature is available at https://www.openssh.com/agent-restrict.html and the protocol extensions are documented in the PROTOCOL and PROTOCOL.agent files in the source release. * ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the default KEXAlgorithms list (after the ECDH methods but before the prime-group DH ones). The next release of OpenSSH is likely to make this key exchange the default method. * ssh-keygen(1): when downloading resident keys from a FIDO token, pass back the user ID that was used when the key was created and append it to the filename the key is written to (if it is not the default). Avoids keys being clobbered if the user created multiple resident keys with the same application string but different user IDs. * ssh-keygen(1), ssh(1), ssh-agent(1): better handling for FIDO keys on tokens that provide user verification (UV) on the device itself, including biometric keys, avoiding unnecessary PIN prompts. * ssh-keygen(1): add "ssh-keygen -Y match-principals" operation to perform matching of principals names against an allowed signers file. To be used towards a TOFU model for SSH signatures in git. * ssh-add(1), ssh-agent(1): allow pin-required FIDO keys to be added to ssh-agent(1). $SSH_ASKPASS will be used to request the PIN at authentication time. * ssh-keygen(1): allow selection of hash at sshsig signing time (either sha512 (default) or sha256). * ssh(1), sshd(8): read network data directly to the packet input buffer instead of indirectly via a small stack buffer. Provides a modest performance improvement. * ssh(1), sshd(8): read data directly to the channel input buffer, providing a similar modest performance improvement. * ssh(1): extend the PubkeyAuthentication configuration directive to accept yes|no|unbound|host-bound to allow control over one of the protocol extensions used to implement agent-restricted keys. = Bugfixes * sshd(8): document that CASignatureAlgorithms, ExposeAuthInfo and PubkeyAuthOptions can be used in a Match block. PR277. * sshd(8): fix possible string truncation when constructing paths to .rhosts/.shosts files with very long user home directory names. * ssh-keysign(1): unbreak for KEX algorithms that use SHA384/512 exchange hashes * ssh(1): don't put the TTY into raw mode when SessionType=none, avoids ^C being unable to kill such a session. bz3360 * scp(1): fix some corner-case bugs in SFTP-mode handling of ~-prefixed paths. * ssh(1): unbreak hostbased auth using RSA keys. Allow ssh(1) to select RSA keys when only RSA/SHA2 signature algorithms are configured (this is the default case). Previously RSA keys were not being considered in the default case. * ssh-keysign(1): make ssh-keysign use the requested signature algorithm and not the default for the key type. Part of unbreaking hostbased auth for RSA/SHA2 keys. * ssh(1): stricter UpdateHostkey signature verification logic on the client- side. Require RSA/SHA2 signatures for RSA hostkeys except when RSA/SHA1 was explicitly negotiated during initial KEX; bz3375 * ssh(1), sshd(8): fix signature algorithm selection logic for UpdateHostkeys on the server side. The previous code tried to prefer RSA/SHA2 for hostkey proofs of RSA keys, but missed some cases. This will use RSA/SHA2 signatures for RSA keys if the client proposed these algorithms in initial KEX. bz3375 * All: convert all uses of select(2)/pselect(2) to poll(2)/ppoll(2). This includes the mainloops in ssh(1), ssh-agent(1), ssh-agent(1) and sftp-server(8), as well as the sshd(8) listen loop and all other FD read/writability checks. On platforms with missing or broken poll(2)/ppoll(2) syscalls a select(2)-based compat shim is available. * ssh-keygen(1): the "-Y find-principals" command was verifying key validity when using ca certs but not with simple key lifetimes within the allowed signers file. * ssh-keygen(1): make sshsig verify-time argument parsing optional * sshd(8): fix truncation in rhosts/shosts path construction. * ssh(1), ssh-agent(1): avoid xmalloc(0) for PKCS#11 keyid for ECDSA keys (we already did this for RSA keys). Avoids fatal errors for PKCS#11 libraries that return empty keyid, e.g. Microchip ATECC608B "cryptoauthlib"; bz#3364 * ssh(1), ssh-agent(1): improve the testing of credentials against inserted FIDO: ask the token whether a particular key belongs to it in cases where the token supports on-token user-verification (e.g. biometrics) rather than just assuming that it will accept it. Will reduce spurious "Confirm user presence" notifications for key handles that relate to FIDO keys that are not currently inserted in at least some cases. bz3366 * ssh(1), sshd(8): correct value for IPTOS_DSCP_LE. It needs to allow for the preceding two ECN bits. bz#3373 * ssh-keygen(1): add missing -O option to usage() for the "-Y sign" option. * ssh-keygen(1): fix a NULL deref when using the find-principals function, when matching an allowed_signers line that contains a namespace restriction, but no restriction specified on the command-line * ssh-agent(1): fix memleak in process_extension(); oss-fuzz issue #42719 * ssh(1): suppress "Connection to xxx closed" messages when LogLevel is set to "error" or above. bz3378 * ssh(1), sshd(8): use correct zlib flags when inflate(3)-ing compressed packet data. bz3372 * scp(1): when recursively transferring files in SFTP mode, create the destination directory if it doesn't already exist to match scp(1) in legacy RCP mode behaviour. * scp(1): many improvements in error message consistency between scp(1) in SFTP mode vs legacy RCP mode. * sshd(8): fix potential race in SIGTERM handling PR289 * ssh(1), ssh(8): since DSA keys are deprecated, move them to the end of the default list of public keys so that they will be tried last. PR295 * ssh-keygen(1): allow 'ssh-keygen -Y find-principals' to match wildcard principals in allowed_signers files = Portability * ssh(1), sshd(8): don't trust closefrom(2) on Linux. glibc's implementation does not work in a chroot when the kernel does not have close_range(2). It tries to read from /proc/self/fd and when that fails dies with an assertion of sorts. Instead, call close_range(2) directly from our compat code and fall back if that fails. bz#3349, * OS X poll(2) is broken; use compat replacement. For character- special devices like /dev/null, Darwin's poll(2) returns POLLNVAL when polled with POLLIN. Apparently this is Apple bug 3710161 - not public but a websearch will find other OSS projects rediscovering it periodically since it was first identified in 2005. * Correct handling of exceptfds/POLLPRI in our select(2)-based poll(2)/ppoll(2) compat implementation. * Cygwin: correct checking of mbstowcs() return value. * Add a basic SECURITY.md that refers people to the openssh.com website. * Enable additional compiler warnings and toolchain hardening flags, including -Wbitwise-instead-of-logical, -Wmisleading-indentation, -fzero-call-used-regs and -ftrivial-auto-var-init. * HP/UX. Use compat getline(3) on HP-UX 10.x, where the libc version is not reliable. - Rebased patches: * openssh-7.7p1-ldap.patch * openssh-8.0p1-gssapi-keyex.patch * openssh-8.1p1-audit.patch * openssh-8.4p1-vendordir.patch * openssh-reenable-dh-group14-sha1-default.patch OBS-URL: https://build.opensuse.org/request/show/960041 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=237
2022-03-08 08:49:22 +01:00
--- openssh-8.9p1.orig/myproposal.h
+++ openssh-8.9p1/myproposal.h
@@ -34,7 +34,8 @@
Accepting request 866139 from home:hpjansson:branches:network - Improve robustness of sshd init detection when upgrading from a pre-systemd distribution. - Add openssh-reenable-dh-group14-sha1-default.patch, which adds diffie-hellman-group14-sha1 key exchange back to the default list (bsc#1180958). This is needed for backwards compatibility with older platforms. OBS-URL: https://build.opensuse.org/request/show/866139 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=224
2021-01-23 00:06:22 +01:00
"diffie-hellman-group-exchange-sha256," \
"diffie-hellman-group16-sha512," \
"diffie-hellman-group18-sha512," \
- "diffie-hellman-group14-sha256"
+ "diffie-hellman-group14-sha256," \
+ "diffie-hellman-group14-sha1"
#define KEX_CLIENT_KEX KEX_SERVER_KEX
Accepting request 960041 from home:hpjansson:openssh-tw - Version update to 8.9p1: = Security * sshd(8): fix an integer overflow in the user authentication path that, in conjunction with other logic errors, could have yielded unauthenticated access under difficult to exploit conditions. This situation is not exploitable because of independent checks in the privilege separation monitor. Privilege separation has been enabled by default in since openssh-3.2.2 (released in 2002) and has been mandatory since openssh-7.5 (released in 2017). Moreover, portable OpenSSH has used toolchain features available in most modern compilers to abort on signed integer overflow since openssh-6.5 (released in 2014). Thanks to Malcolm Stagg for finding and reporting this bug. = Potentially-incompatible changes * sshd(8), portable OpenSSH only: this release removes in-built support for MD5-hashed passwords. If you require these on your system then we recommend linking against libxcrypt or similar. * This release modifies the FIDO security key middleware interface and increments SSH_SK_VERSION_MAJOR. = New features * ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for restricting forwarding and use of keys added to ssh-agent(1) A detailed description of the feature is available at https://www.openssh.com/agent-restrict.html and the protocol extensions are documented in the PROTOCOL and PROTOCOL.agent files in the source release. * ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the default KEXAlgorithms list (after the ECDH methods but before the prime-group DH ones). The next release of OpenSSH is likely to make this key exchange the default method. * ssh-keygen(1): when downloading resident keys from a FIDO token, pass back the user ID that was used when the key was created and append it to the filename the key is written to (if it is not the default). Avoids keys being clobbered if the user created multiple resident keys with the same application string but different user IDs. * ssh-keygen(1), ssh(1), ssh-agent(1): better handling for FIDO keys on tokens that provide user verification (UV) on the device itself, including biometric keys, avoiding unnecessary PIN prompts. * ssh-keygen(1): add "ssh-keygen -Y match-principals" operation to perform matching of principals names against an allowed signers file. To be used towards a TOFU model for SSH signatures in git. * ssh-add(1), ssh-agent(1): allow pin-required FIDO keys to be added to ssh-agent(1). $SSH_ASKPASS will be used to request the PIN at authentication time. * ssh-keygen(1): allow selection of hash at sshsig signing time (either sha512 (default) or sha256). * ssh(1), sshd(8): read network data directly to the packet input buffer instead of indirectly via a small stack buffer. Provides a modest performance improvement. * ssh(1), sshd(8): read data directly to the channel input buffer, providing a similar modest performance improvement. * ssh(1): extend the PubkeyAuthentication configuration directive to accept yes|no|unbound|host-bound to allow control over one of the protocol extensions used to implement agent-restricted keys. = Bugfixes * sshd(8): document that CASignatureAlgorithms, ExposeAuthInfo and PubkeyAuthOptions can be used in a Match block. PR277. * sshd(8): fix possible string truncation when constructing paths to .rhosts/.shosts files with very long user home directory names. * ssh-keysign(1): unbreak for KEX algorithms that use SHA384/512 exchange hashes * ssh(1): don't put the TTY into raw mode when SessionType=none, avoids ^C being unable to kill such a session. bz3360 * scp(1): fix some corner-case bugs in SFTP-mode handling of ~-prefixed paths. * ssh(1): unbreak hostbased auth using RSA keys. Allow ssh(1) to select RSA keys when only RSA/SHA2 signature algorithms are configured (this is the default case). Previously RSA keys were not being considered in the default case. * ssh-keysign(1): make ssh-keysign use the requested signature algorithm and not the default for the key type. Part of unbreaking hostbased auth for RSA/SHA2 keys. * ssh(1): stricter UpdateHostkey signature verification logic on the client- side. Require RSA/SHA2 signatures for RSA hostkeys except when RSA/SHA1 was explicitly negotiated during initial KEX; bz3375 * ssh(1), sshd(8): fix signature algorithm selection logic for UpdateHostkeys on the server side. The previous code tried to prefer RSA/SHA2 for hostkey proofs of RSA keys, but missed some cases. This will use RSA/SHA2 signatures for RSA keys if the client proposed these algorithms in initial KEX. bz3375 * All: convert all uses of select(2)/pselect(2) to poll(2)/ppoll(2). This includes the mainloops in ssh(1), ssh-agent(1), ssh-agent(1) and sftp-server(8), as well as the sshd(8) listen loop and all other FD read/writability checks. On platforms with missing or broken poll(2)/ppoll(2) syscalls a select(2)-based compat shim is available. * ssh-keygen(1): the "-Y find-principals" command was verifying key validity when using ca certs but not with simple key lifetimes within the allowed signers file. * ssh-keygen(1): make sshsig verify-time argument parsing optional * sshd(8): fix truncation in rhosts/shosts path construction. * ssh(1), ssh-agent(1): avoid xmalloc(0) for PKCS#11 keyid for ECDSA keys (we already did this for RSA keys). Avoids fatal errors for PKCS#11 libraries that return empty keyid, e.g. Microchip ATECC608B "cryptoauthlib"; bz#3364 * ssh(1), ssh-agent(1): improve the testing of credentials against inserted FIDO: ask the token whether a particular key belongs to it in cases where the token supports on-token user-verification (e.g. biometrics) rather than just assuming that it will accept it. Will reduce spurious "Confirm user presence" notifications for key handles that relate to FIDO keys that are not currently inserted in at least some cases. bz3366 * ssh(1), sshd(8): correct value for IPTOS_DSCP_LE. It needs to allow for the preceding two ECN bits. bz#3373 * ssh-keygen(1): add missing -O option to usage() for the "-Y sign" option. * ssh-keygen(1): fix a NULL deref when using the find-principals function, when matching an allowed_signers line that contains a namespace restriction, but no restriction specified on the command-line * ssh-agent(1): fix memleak in process_extension(); oss-fuzz issue #42719 * ssh(1): suppress "Connection to xxx closed" messages when LogLevel is set to "error" or above. bz3378 * ssh(1), sshd(8): use correct zlib flags when inflate(3)-ing compressed packet data. bz3372 * scp(1): when recursively transferring files in SFTP mode, create the destination directory if it doesn't already exist to match scp(1) in legacy RCP mode behaviour. * scp(1): many improvements in error message consistency between scp(1) in SFTP mode vs legacy RCP mode. * sshd(8): fix potential race in SIGTERM handling PR289 * ssh(1), ssh(8): since DSA keys are deprecated, move them to the end of the default list of public keys so that they will be tried last. PR295 * ssh-keygen(1): allow 'ssh-keygen -Y find-principals' to match wildcard principals in allowed_signers files = Portability * ssh(1), sshd(8): don't trust closefrom(2) on Linux. glibc's implementation does not work in a chroot when the kernel does not have close_range(2). It tries to read from /proc/self/fd and when that fails dies with an assertion of sorts. Instead, call close_range(2) directly from our compat code and fall back if that fails. bz#3349, * OS X poll(2) is broken; use compat replacement. For character- special devices like /dev/null, Darwin's poll(2) returns POLLNVAL when polled with POLLIN. Apparently this is Apple bug 3710161 - not public but a websearch will find other OSS projects rediscovering it periodically since it was first identified in 2005. * Correct handling of exceptfds/POLLPRI in our select(2)-based poll(2)/ppoll(2) compat implementation. * Cygwin: correct checking of mbstowcs() return value. * Add a basic SECURITY.md that refers people to the openssh.com website. * Enable additional compiler warnings and toolchain hardening flags, including -Wbitwise-instead-of-logical, -Wmisleading-indentation, -fzero-call-used-regs and -ftrivial-auto-var-init. * HP/UX. Use compat getline(3) on HP-UX 10.x, where the libc version is not reliable. - Rebased patches: * openssh-7.7p1-ldap.patch * openssh-8.0p1-gssapi-keyex.patch * openssh-8.1p1-audit.patch * openssh-8.4p1-vendordir.patch * openssh-reenable-dh-group14-sha1-default.patch OBS-URL: https://build.opensuse.org/request/show/960041 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=237
2022-03-08 08:49:22 +01:00
Index: openssh-8.9p1/ssh_config.5
Accepting request 922068 from home:hpjansson:branches:network - Version upgrade to 8.8p1 * No changes for askpass, see main package changelog for details - Version update to 8.8p1: = Security * sshd(8) from OpenSSH 6.2 through 8.7 failed to correctly initialise supplemental groups when executing an AuthorizedKeysCommand or AuthorizedPrincipalsCommand, where a AuthorizedKeysCommandUser or AuthorizedPrincipalsCommandUser directive has been set to run the command as a different user. Instead these commands would inherit the groups that sshd(8) was started with. Depending on system configuration, inherited groups may allow AuthorizedKeysCommand/AuthorizedPrincipalsCommand helper programs to gain unintended privilege. Neither AuthorizedKeysCommand nor AuthorizedPrincipalsCommand are enabled by default in sshd_config(5). = Potentially-incompatible changes * This release disables RSA signatures using the SHA-1 hash algorithm by default. This change has been made as the SHA-1 hash algorithm is cryptographically broken, and it is possible to create chosen-prefix hash collisions for <USD$50K. For most users, this change should be invisible and there is no need to replace ssh-rsa keys. OpenSSH has supported RFC8332 RSA/SHA-256/512 signatures since release 7.2 and existing ssh-rsa keys will automatically use the stronger algorithm where possible. Incompatibility is more likely when connecting to older SSH implementations that have not been upgraded or have not closely tracked improvements in the SSH protocol. For these cases, it may be necessary to selectively re-enable RSA/SHA1 to allow connection and/or user authentication via the HostkeyAlgorithms and PubkeyAcceptedAlgorithms options. = New features * ssh(1): allow the ssh_config(5) CanonicalizePermittedCNAMEs directive to accept a "none" argument to specify the default behaviour. = Bugfixes * scp(1): when using the SFTP protocol, continue transferring files after a transfer error occurs, better matching original scp/rcp behaviour. * ssh(1): fixed a number of memory leaks in multiplexing, * ssh-keygen(1): avoid crash when using the -Y find-principals command. * A number of documentation and manual improvements, including bz#3340, PR139, PR215, PR241, PR257 - Additional changes from 8.7p1 release: = Potentially-incompatible changes * scp(1): this release changes the behaviour of remote to remote copies (e.g. "scp host-a:/path host-b:") to transfer through the local host by default. This was previously available via the -3 flag. This mode avoids the need to expose credentials on the origin hop, avoids triplicate interpretation of filenames by the shell (by the local system, the copy origin and the destination) and, in conjunction with the SFTP support for scp(1) mentioned below, allows use of all authentication methods to the remote hosts (previously, only non-interactive methods could be used). A -R flag has been added to select the old behaviour. * ssh(1)/sshd(8): both the client and server are now using a stricter configuration file parser. The new parser uses more shell-like rules for quotes, space and escape characters. It is also more strict in rejecting configurations that include options lacking arguments. Previously some options (e.g. DenyUsers) could appear on a line with no subsequent arguments. This release will reject such configurations. The new parser will also reject configurations with unterminated quotes and multiple '=' characters after the option name. * ssh(1): when using SSHFP DNS records for host key verification, ssh(1) will verify all matching records instead of just those with the specific signature type requested. This may cause host key verification problems if stale SSHFP records of a different or legacy signature type exist alongside other records for a particular host. bz#3322 * ssh-keygen(1): when generating a FIDO key and specifying an explicit attestation challenge (using -Ochallenge), the challenge will now be hashed by the builtin security key middleware. This removes the (undocumented) requirement that challenges be exactly 32 bytes in length and matches the expectations of libfido2. * sshd(8): environment="..." directives in authorized_keys files are now first-match-wins and limited to 1024 discrete environment variable names. = New features * scp(1): experimental support for transfers using the SFTP protocol as a replacement for the venerable SCP/RCP protocol that it has traditionally used. SFTP offers more predictable filename handling and does not require expansion of glob(3) patterns via the shell on the remote side. * sftp-server(8): add a protocol extension to support expansion of ~/ and ~user/ prefixed paths. This was added to support these paths when used by scp(1) while in SFTP mode. * ssh(1): add a ForkAfterAuthentication ssh_config(5) counterpart to the ssh(1) -f flag. GHPR231 * ssh(1): add a StdinNull directive to ssh_config(5) that allows the config file to do the same thing as -n does on the ssh(1) command- line. GHPR231 * ssh(1): add a SessionType directive to ssh_config, allowing the configuration file to offer equivalent control to the -N (no session) and -s (subsystem) command-line flags. GHPR231 * ssh-keygen(1): allowed signers files used by ssh-keygen(1) signatures now support listing key validity intervals alongside they key, and ssh-keygen(1) can optionally check during signature verification whether a specified time falls inside this interval. This feature is intended for use by git to support signing and verifying objects using ssh keys. * ssh-keygen(8): support printing of the full public key in a sshsig signature via a -Oprint-pubkey flag. = Bugfixes * ssh(1)/sshd(8): start time-based re-keying exactly on schedule in the client and server mainloops. Previously the re-key timeout could expire but re-keying would not start until a packet was sent or received, causing a spin in select() if the connection was quiescent. * ssh-keygen(1): avoid Y2038 problem in printing certificate validity lifetimes. Dates past 2^31-1 seconds since epoch were displayed incorrectly on some platforms. bz#3329 * scp(1): allow spaces to appear in usernames for local to remote and scp -3 remote to remote copies. bz#1164 * ssh(1)/sshd(8): remove references to ChallengeResponseAuthentication in favour of KbdInteractiveAuthentication. The former is what was in SSHv1, the latter is what is in SSHv2 (RFC4256) and they were treated as somewhat but not entirely equivalent. We retain the old name as a deprecated alias so configuration files continue to work as well as a reference in the man page for people looking for it. bz#3303 * ssh(1)/ssh-add(1)/ssh-keygen(1): fix decoding of X.509 subject name when extracting a key from a PKCS#11 certificate. bz#3327 * ssh(1): restore blocking status on stdio fds before close. ssh(1) needs file descriptors in non-blocking mode to operate but it was not restoring the original state on exit. This could cause problems with fds shared with other programs via the shell, bz#3280 and GHPR246 * ssh(1)/sshd(8): switch both client and server mainloops from select(3) to pselect(3). Avoids race conditions where a signal may arrive immediately before select(3) and not be processed until an event fires. bz#2158 * ssh(1): sessions started with ControlPersist were incorrectly executing a shell when the -N (no shell) option was specified. bz#3290 * ssh(1): check if IPQoS or TunnelDevice are already set before overriding. Prevents values in config files from overriding values supplied on the command line. bz#3319 * ssh(1): fix debug message when finding a private key to match a certificate being attempted for user authentication. Previously it would print the certificate's path, whereas it was supposed to be showing the private key's path. GHPR247 * sshd(8): match host certificates against host public keys, not private keys. Allows use of certificates with private keys held in a ssh-agent. bz#3524 * ssh(1): add a workaround for a bug in OpenSSH 7.4 sshd(8), which allows RSA/SHA2 signatures for public key authentication but fails to advertise this correctly via SSH2_MSG_EXT_INFO. This causes clients of these server to incorrectly match PubkeyAcceptedAlgorithmse and potentially refuse to offer valid keys. bz#3213 * sftp(1)/scp(1): degrade gracefully if a sftp-server offers the limits@openssh.com extension but fails when the client tries to invoke it. bz#3318 * ssh(1): allow ssh_config SetEnv to override $TERM, which is otherwise handled specially by the protocol. Useful in ~/.ssh/config to set TERM to something generic (e.g. "xterm" instead of "xterm-256color") for destinations that lack terminfo entries. * sftp-server(8): the limits@openssh.com extension was incorrectly marked as an operation that writes to the filesystem, which made it unavailable in sftp-server read-only mode. bz#3318 * ssh(1): fix SEGV in UpdateHostkeys debug() message, triggered when the update removed more host keys than remain present. * Many manual page fixes. - Additional changes from 8.6p1 release: = Security * sshd(8): OpenSSH 8.5 introduced the LogVerbose keyword. When this option was enabled with a set of patterns that activated logging in code that runs in the low-privilege sandboxed sshd process, the log messages were constructed in such a way that printf(3) format strings could effectively be specified the low-privilege code. = New features * sftp-server(8): add a new limits@openssh.com protocol extension that allows a client to discover various server limits, including maximum packet size and maximum read/write length. * sftp(1): use the new limits@openssh.com extension (when available) to select better transfer lengths in the client. * sshd(8): Add ModuliFile keyword to sshd_config to specify the location of the "moduli" file containing the groups for DH-GEX. * unit tests: Add a TEST_SSH_ELAPSED_TIMES environment variable to enable printing of the elapsed time in seconds of each test. = Bugfixes * ssh_config(5), sshd_config(5): sync CASignatureAlgorithms lists in manual pages with the current default. GHPR174 * ssh(1): ensure that pkcs11_del_provider() is called before exit. GHPR234 * ssh(1), sshd(8): fix problems in string->argv conversion. Multiple backslashes were not being dequoted correctly and quoted space in the middle of a string was being incorrectly split. GHPR223 * ssh(1): return non-zero exit status when killed by signal; bz#3281 * sftp-server(8): increase maximum SSH2_FXP_READ to match the maximum packet size. Also handle zero-length reads that are not explicitly banned by the spec. - Additional changes from 8.5p1 release: = Security * ssh-agent(1): fixed a double-free memory corruption that was introduced in OpenSSH 8.2 . We treat all such memory faults as potentially exploitable. This bug could be reached by an attacker with access to the agent socket. = Potentially-incompatible changes * ssh(1), sshd(8): this release changes the first-preference signature algorithm from ECDSA to ED25519. * ssh(1), sshd(8): set the TOS/DSCP specified in the configuration for interactive use prior to TCP connect. The connection phase of the SSH session is time-sensitive and often explicitly interactive. The ultimate interactive/bulk TOS/DSCP will be set after authentication completes. * ssh(1), sshd(8): remove the pre-standardization cipher rijndael-cbc@lysator.liu.se. It is an alias for aes256-cbc before it was standardized in RFC4253 (2006), has been deprecated and disabled by default since OpenSSH 7.2 (2016) and was only briefly documented in ssh.1 in 2001. * ssh(1), sshd(8): update/replace the experimental post-quantum hybrid key exchange method based on Streamlined NTRU Prime coupled with X25519. The previous sntrup4591761x25519-sha512@tinyssh.org method is replaced with sntrup761x25519-sha512@openssh.com. * ssh(1): disable CheckHostIP by default. It provides insignificant benefits while making key rotation significantly more difficult, especially for hosts behind IP-based load-balancers. = New features * ssh(1): this release enables UpdateHostkeys by default subject to some conservative preconditions: - The key was matched in the UserKnownHostsFile (and not in the GlobalKnownHostsFile). - The same key does not exist under another name. - A certificate host key is not in use. - known_hosts contains no matching wildcard hostname pattern. - VerifyHostKeyDNS is not enabled. - The default UserKnownHostsFile is in use. * ssh(1), sshd(8): add a new LogVerbose configuration directive for that allows forcing maximum debug logging by file/function/line pattern-lists. * ssh(1): when prompting the user to accept a new hostkey, display any other host names/addresses already associated with the key. * ssh(1): allow UserKnownHostsFile=none to indicate that no known_hosts file should be used to identify host keys. * ssh(1): add a ssh_config KnownHostsCommand option that allows the client to obtain known_hosts data from a command in addition to the usual files. * ssh(1): add a ssh_config PermitRemoteOpen option that allows the client to restrict the destination when RemoteForward is used with SOCKS. * ssh(1): for FIDO keys, if a signature operation fails with a "incorrect PIN" reason and no PIN was initially requested from the user, then request a PIN and retry the operation. This supports some biometric devices that fall back to requiring PIN when reading of the biometric failed, and devices that require PINs for all hosted credentials. * sshd(8): implement client address-based rate-limiting via new sshd_config(5) PerSourceMaxStartups and PerSourceNetBlockSize directives that provide more fine-grained control on a per-origin address basis than the global MaxStartups limit. = Bugfixes * ssh(1): Prefix keyboard interactive prompts with "(user@host)" to make it easier to determine which connection they are associated with in cases like scp -3, ProxyJump, etc. bz#3224 * sshd(8): fix sshd_config SetEnv directives located inside Match blocks. GHPR201 * ssh(1): when requesting a FIDO token touch on stderr, inform the user once the touch has been recorded. * ssh(1): prevent integer overflow when ridiculously large ConnectTimeout values are specified, capping the effective value (for most platforms) at 24 days. bz#3229 * ssh(1): consider the ECDSA key subtype when ordering host key algorithms in the client. * ssh(1), sshd(8): rename the PubkeyAcceptedKeyTypes keyword to PubkeyAcceptedAlgorithms. The previous name incorrectly suggested that it control allowed key algorithms, when this option actually specifies the signature algorithms that are accepted. The previous name remains available as an alias. bz#3253 * ssh(1), sshd(8): similarly, rename HostbasedKeyTypes (ssh) and HostbasedAcceptedKeyTypes (sshd) to HostbasedAcceptedAlgorithms. * sftp-server(8): add missing lsetstat@openssh.com documentation and advertisement in the server's SSH2_FXP_VERSION hello packet. * ssh(1), sshd(8): more strictly enforce KEX state-machine by banning packet types once they are received. Fixes memleak caused by duplicate SSH2_MSG_KEX_DH_GEX_REQUEST (oss-fuzz #30078). * sftp(1): allow the full range of UIDs/GIDs for chown/chgrp on 32bit platforms instead of being limited by LONG_MAX. bz#3206 * Minor man page fixes (capitalization, commas, etc.) bz#3223 * sftp(1): when doing an sftp recursive upload or download of a read-only directory, ensure that the directory is created with write and execute permissions in the interim so that the transfer can actually complete, then set the directory permission as the final step. bz#3222 * ssh-keygen(1): document the -Z, check the validity of its argument earlier and provide a better error message if it's not correct. bz#2879 * ssh(1): ignore comments at the end of config lines in ssh_config, similar to what we already do for sshd_config. bz#2320 * sshd_config(5): mention that DisableForwarding is valid in a sshd_config Match block. bz3239 * sftp(1): fix incorrect sorting of "ls -ltr" under some circumstances. bz3248. * ssh(1), sshd(8): fix potential integer truncation of (unlikely) timeout values. bz#3250 * ssh(1): make hostbased authentication send the signature algorithm in its SSH2_MSG_USERAUTH_REQUEST packets instead of the key type. This make HostbasedAcceptedAlgorithms do what it is supposed to - filter on signature algorithm and not key type. - Rebased patches: * openssh-7.7p1-IPv6_X_forwarding.patch * openssh-7.7p1-X11_trusted_forwarding.patch * openssh-7.7p1-X_forward_with_disabled_ipv6.patch * openssh-7.7p1-cavstest-ctr.patch * openssh-7.7p1-cavstest-kdf.patch * openssh-7.7p1-disable_openssl_abi_check.patch * openssh-7.7p1-eal3.patch * openssh-7.7p1-enable_PAM_by_default.patch * openssh-7.7p1-fips.patch * openssh-7.7p1-fips_checks.patch * openssh-7.7p1-host_ident.patch * openssh-7.7p1-hostname_changes_when_forwarding_X.patch * openssh-7.7p1-ldap.patch * openssh-7.7p1-no_fork-no_pid_file.patch * openssh-7.7p1-pam_check_locks.patch * openssh-7.7p1-pts_names_formatting.patch * openssh-7.7p1-remove_xauth_cookies_on_exit.patch * openssh-7.7p1-seccomp_ipc_flock.patch * openssh-7.7p1-seccomp_stat.patch * openssh-7.7p1-send_locale.patch * openssh-7.7p1-sftp_force_permissions.patch * openssh-7.7p1-sftp_print_diagnostic_messages.patch * openssh-7.7p1-systemd-notify.patch * openssh-7.9p1-keygen-preserve-perms.patch * openssh-7.9p1-revert-new-qos-defaults.patch * openssh-8.0p1-gssapi-keyex.patch * openssh-8.1p1-audit.patch * openssh-8.1p1-seccomp-clock_gettime64.patch * openssh-8.1p1-seccomp-clock_nanosleep.patch * openssh-8.1p1-seccomp-clock_nanosleep_time64.patch * openssh-8.1p1-use-openssl-kdf.patch * openssh-8.4p1-vendordir.patch * openssh-fips-ensure-approved-moduli.patch * openssh-link-with-sk.patch * openssh-reenable-dh-group14-sha1-default.patch * openssh-whitelist-syscalls.patch - Removed openssh-fix-ssh-copy-id.patch (fixed upstream). OBS-URL: https://build.opensuse.org/request/show/922068 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=235
2021-10-07 10:06:58 +02:00
===================================================================
Accepting request 960041 from home:hpjansson:openssh-tw - Version update to 8.9p1: = Security * sshd(8): fix an integer overflow in the user authentication path that, in conjunction with other logic errors, could have yielded unauthenticated access under difficult to exploit conditions. This situation is not exploitable because of independent checks in the privilege separation monitor. Privilege separation has been enabled by default in since openssh-3.2.2 (released in 2002) and has been mandatory since openssh-7.5 (released in 2017). Moreover, portable OpenSSH has used toolchain features available in most modern compilers to abort on signed integer overflow since openssh-6.5 (released in 2014). Thanks to Malcolm Stagg for finding and reporting this bug. = Potentially-incompatible changes * sshd(8), portable OpenSSH only: this release removes in-built support for MD5-hashed passwords. If you require these on your system then we recommend linking against libxcrypt or similar. * This release modifies the FIDO security key middleware interface and increments SSH_SK_VERSION_MAJOR. = New features * ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for restricting forwarding and use of keys added to ssh-agent(1) A detailed description of the feature is available at https://www.openssh.com/agent-restrict.html and the protocol extensions are documented in the PROTOCOL and PROTOCOL.agent files in the source release. * ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the default KEXAlgorithms list (after the ECDH methods but before the prime-group DH ones). The next release of OpenSSH is likely to make this key exchange the default method. * ssh-keygen(1): when downloading resident keys from a FIDO token, pass back the user ID that was used when the key was created and append it to the filename the key is written to (if it is not the default). Avoids keys being clobbered if the user created multiple resident keys with the same application string but different user IDs. * ssh-keygen(1), ssh(1), ssh-agent(1): better handling for FIDO keys on tokens that provide user verification (UV) on the device itself, including biometric keys, avoiding unnecessary PIN prompts. * ssh-keygen(1): add "ssh-keygen -Y match-principals" operation to perform matching of principals names against an allowed signers file. To be used towards a TOFU model for SSH signatures in git. * ssh-add(1), ssh-agent(1): allow pin-required FIDO keys to be added to ssh-agent(1). $SSH_ASKPASS will be used to request the PIN at authentication time. * ssh-keygen(1): allow selection of hash at sshsig signing time (either sha512 (default) or sha256). * ssh(1), sshd(8): read network data directly to the packet input buffer instead of indirectly via a small stack buffer. Provides a modest performance improvement. * ssh(1), sshd(8): read data directly to the channel input buffer, providing a similar modest performance improvement. * ssh(1): extend the PubkeyAuthentication configuration directive to accept yes|no|unbound|host-bound to allow control over one of the protocol extensions used to implement agent-restricted keys. = Bugfixes * sshd(8): document that CASignatureAlgorithms, ExposeAuthInfo and PubkeyAuthOptions can be used in a Match block. PR277. * sshd(8): fix possible string truncation when constructing paths to .rhosts/.shosts files with very long user home directory names. * ssh-keysign(1): unbreak for KEX algorithms that use SHA384/512 exchange hashes * ssh(1): don't put the TTY into raw mode when SessionType=none, avoids ^C being unable to kill such a session. bz3360 * scp(1): fix some corner-case bugs in SFTP-mode handling of ~-prefixed paths. * ssh(1): unbreak hostbased auth using RSA keys. Allow ssh(1) to select RSA keys when only RSA/SHA2 signature algorithms are configured (this is the default case). Previously RSA keys were not being considered in the default case. * ssh-keysign(1): make ssh-keysign use the requested signature algorithm and not the default for the key type. Part of unbreaking hostbased auth for RSA/SHA2 keys. * ssh(1): stricter UpdateHostkey signature verification logic on the client- side. Require RSA/SHA2 signatures for RSA hostkeys except when RSA/SHA1 was explicitly negotiated during initial KEX; bz3375 * ssh(1), sshd(8): fix signature algorithm selection logic for UpdateHostkeys on the server side. The previous code tried to prefer RSA/SHA2 for hostkey proofs of RSA keys, but missed some cases. This will use RSA/SHA2 signatures for RSA keys if the client proposed these algorithms in initial KEX. bz3375 * All: convert all uses of select(2)/pselect(2) to poll(2)/ppoll(2). This includes the mainloops in ssh(1), ssh-agent(1), ssh-agent(1) and sftp-server(8), as well as the sshd(8) listen loop and all other FD read/writability checks. On platforms with missing or broken poll(2)/ppoll(2) syscalls a select(2)-based compat shim is available. * ssh-keygen(1): the "-Y find-principals" command was verifying key validity when using ca certs but not with simple key lifetimes within the allowed signers file. * ssh-keygen(1): make sshsig verify-time argument parsing optional * sshd(8): fix truncation in rhosts/shosts path construction. * ssh(1), ssh-agent(1): avoid xmalloc(0) for PKCS#11 keyid for ECDSA keys (we already did this for RSA keys). Avoids fatal errors for PKCS#11 libraries that return empty keyid, e.g. Microchip ATECC608B "cryptoauthlib"; bz#3364 * ssh(1), ssh-agent(1): improve the testing of credentials against inserted FIDO: ask the token whether a particular key belongs to it in cases where the token supports on-token user-verification (e.g. biometrics) rather than just assuming that it will accept it. Will reduce spurious "Confirm user presence" notifications for key handles that relate to FIDO keys that are not currently inserted in at least some cases. bz3366 * ssh(1), sshd(8): correct value for IPTOS_DSCP_LE. It needs to allow for the preceding two ECN bits. bz#3373 * ssh-keygen(1): add missing -O option to usage() for the "-Y sign" option. * ssh-keygen(1): fix a NULL deref when using the find-principals function, when matching an allowed_signers line that contains a namespace restriction, but no restriction specified on the command-line * ssh-agent(1): fix memleak in process_extension(); oss-fuzz issue #42719 * ssh(1): suppress "Connection to xxx closed" messages when LogLevel is set to "error" or above. bz3378 * ssh(1), sshd(8): use correct zlib flags when inflate(3)-ing compressed packet data. bz3372 * scp(1): when recursively transferring files in SFTP mode, create the destination directory if it doesn't already exist to match scp(1) in legacy RCP mode behaviour. * scp(1): many improvements in error message consistency between scp(1) in SFTP mode vs legacy RCP mode. * sshd(8): fix potential race in SIGTERM handling PR289 * ssh(1), ssh(8): since DSA keys are deprecated, move them to the end of the default list of public keys so that they will be tried last. PR295 * ssh-keygen(1): allow 'ssh-keygen -Y find-principals' to match wildcard principals in allowed_signers files = Portability * ssh(1), sshd(8): don't trust closefrom(2) on Linux. glibc's implementation does not work in a chroot when the kernel does not have close_range(2). It tries to read from /proc/self/fd and when that fails dies with an assertion of sorts. Instead, call close_range(2) directly from our compat code and fall back if that fails. bz#3349, * OS X poll(2) is broken; use compat replacement. For character- special devices like /dev/null, Darwin's poll(2) returns POLLNVAL when polled with POLLIN. Apparently this is Apple bug 3710161 - not public but a websearch will find other OSS projects rediscovering it periodically since it was first identified in 2005. * Correct handling of exceptfds/POLLPRI in our select(2)-based poll(2)/ppoll(2) compat implementation. * Cygwin: correct checking of mbstowcs() return value. * Add a basic SECURITY.md that refers people to the openssh.com website. * Enable additional compiler warnings and toolchain hardening flags, including -Wbitwise-instead-of-logical, -Wmisleading-indentation, -fzero-call-used-regs and -ftrivial-auto-var-init. * HP/UX. Use compat getline(3) on HP-UX 10.x, where the libc version is not reliable. - Rebased patches: * openssh-7.7p1-ldap.patch * openssh-8.0p1-gssapi-keyex.patch * openssh-8.1p1-audit.patch * openssh-8.4p1-vendordir.patch * openssh-reenable-dh-group14-sha1-default.patch OBS-URL: https://build.opensuse.org/request/show/960041 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=237
2022-03-08 08:49:22 +01:00
--- openssh-8.9p1.orig/ssh_config.5
+++ openssh-8.9p1/ssh_config.5
@@ -1228,7 +1228,8 @@ sntrup761x25519-sha512@openssh.com,
Accepting request 866139 from home:hpjansson:branches:network - Improve robustness of sshd init detection when upgrading from a pre-systemd distribution. - Add openssh-reenable-dh-group14-sha1-default.patch, which adds diffie-hellman-group14-sha1 key exchange back to the default list (bsc#1180958). This is needed for backwards compatibility with older platforms. OBS-URL: https://build.opensuse.org/request/show/866139 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=224
2021-01-23 00:06:22 +01:00
diffie-hellman-group-exchange-sha256,
diffie-hellman-group16-sha512,
diffie-hellman-group18-sha512,
-diffie-hellman-group14-sha256
+diffie-hellman-group14-sha256,
+diffie-hellman-group14-sha1
.Ed
.Pp
The list of available key exchange algorithms may also be obtained using
Accepting request 960041 from home:hpjansson:openssh-tw - Version update to 8.9p1: = Security * sshd(8): fix an integer overflow in the user authentication path that, in conjunction with other logic errors, could have yielded unauthenticated access under difficult to exploit conditions. This situation is not exploitable because of independent checks in the privilege separation monitor. Privilege separation has been enabled by default in since openssh-3.2.2 (released in 2002) and has been mandatory since openssh-7.5 (released in 2017). Moreover, portable OpenSSH has used toolchain features available in most modern compilers to abort on signed integer overflow since openssh-6.5 (released in 2014). Thanks to Malcolm Stagg for finding and reporting this bug. = Potentially-incompatible changes * sshd(8), portable OpenSSH only: this release removes in-built support for MD5-hashed passwords. If you require these on your system then we recommend linking against libxcrypt or similar. * This release modifies the FIDO security key middleware interface and increments SSH_SK_VERSION_MAJOR. = New features * ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for restricting forwarding and use of keys added to ssh-agent(1) A detailed description of the feature is available at https://www.openssh.com/agent-restrict.html and the protocol extensions are documented in the PROTOCOL and PROTOCOL.agent files in the source release. * ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the default KEXAlgorithms list (after the ECDH methods but before the prime-group DH ones). The next release of OpenSSH is likely to make this key exchange the default method. * ssh-keygen(1): when downloading resident keys from a FIDO token, pass back the user ID that was used when the key was created and append it to the filename the key is written to (if it is not the default). Avoids keys being clobbered if the user created multiple resident keys with the same application string but different user IDs. * ssh-keygen(1), ssh(1), ssh-agent(1): better handling for FIDO keys on tokens that provide user verification (UV) on the device itself, including biometric keys, avoiding unnecessary PIN prompts. * ssh-keygen(1): add "ssh-keygen -Y match-principals" operation to perform matching of principals names against an allowed signers file. To be used towards a TOFU model for SSH signatures in git. * ssh-add(1), ssh-agent(1): allow pin-required FIDO keys to be added to ssh-agent(1). $SSH_ASKPASS will be used to request the PIN at authentication time. * ssh-keygen(1): allow selection of hash at sshsig signing time (either sha512 (default) or sha256). * ssh(1), sshd(8): read network data directly to the packet input buffer instead of indirectly via a small stack buffer. Provides a modest performance improvement. * ssh(1), sshd(8): read data directly to the channel input buffer, providing a similar modest performance improvement. * ssh(1): extend the PubkeyAuthentication configuration directive to accept yes|no|unbound|host-bound to allow control over one of the protocol extensions used to implement agent-restricted keys. = Bugfixes * sshd(8): document that CASignatureAlgorithms, ExposeAuthInfo and PubkeyAuthOptions can be used in a Match block. PR277. * sshd(8): fix possible string truncation when constructing paths to .rhosts/.shosts files with very long user home directory names. * ssh-keysign(1): unbreak for KEX algorithms that use SHA384/512 exchange hashes * ssh(1): don't put the TTY into raw mode when SessionType=none, avoids ^C being unable to kill such a session. bz3360 * scp(1): fix some corner-case bugs in SFTP-mode handling of ~-prefixed paths. * ssh(1): unbreak hostbased auth using RSA keys. Allow ssh(1) to select RSA keys when only RSA/SHA2 signature algorithms are configured (this is the default case). Previously RSA keys were not being considered in the default case. * ssh-keysign(1): make ssh-keysign use the requested signature algorithm and not the default for the key type. Part of unbreaking hostbased auth for RSA/SHA2 keys. * ssh(1): stricter UpdateHostkey signature verification logic on the client- side. Require RSA/SHA2 signatures for RSA hostkeys except when RSA/SHA1 was explicitly negotiated during initial KEX; bz3375 * ssh(1), sshd(8): fix signature algorithm selection logic for UpdateHostkeys on the server side. The previous code tried to prefer RSA/SHA2 for hostkey proofs of RSA keys, but missed some cases. This will use RSA/SHA2 signatures for RSA keys if the client proposed these algorithms in initial KEX. bz3375 * All: convert all uses of select(2)/pselect(2) to poll(2)/ppoll(2). This includes the mainloops in ssh(1), ssh-agent(1), ssh-agent(1) and sftp-server(8), as well as the sshd(8) listen loop and all other FD read/writability checks. On platforms with missing or broken poll(2)/ppoll(2) syscalls a select(2)-based compat shim is available. * ssh-keygen(1): the "-Y find-principals" command was verifying key validity when using ca certs but not with simple key lifetimes within the allowed signers file. * ssh-keygen(1): make sshsig verify-time argument parsing optional * sshd(8): fix truncation in rhosts/shosts path construction. * ssh(1), ssh-agent(1): avoid xmalloc(0) for PKCS#11 keyid for ECDSA keys (we already did this for RSA keys). Avoids fatal errors for PKCS#11 libraries that return empty keyid, e.g. Microchip ATECC608B "cryptoauthlib"; bz#3364 * ssh(1), ssh-agent(1): improve the testing of credentials against inserted FIDO: ask the token whether a particular key belongs to it in cases where the token supports on-token user-verification (e.g. biometrics) rather than just assuming that it will accept it. Will reduce spurious "Confirm user presence" notifications for key handles that relate to FIDO keys that are not currently inserted in at least some cases. bz3366 * ssh(1), sshd(8): correct value for IPTOS_DSCP_LE. It needs to allow for the preceding two ECN bits. bz#3373 * ssh-keygen(1): add missing -O option to usage() for the "-Y sign" option. * ssh-keygen(1): fix a NULL deref when using the find-principals function, when matching an allowed_signers line that contains a namespace restriction, but no restriction specified on the command-line * ssh-agent(1): fix memleak in process_extension(); oss-fuzz issue #42719 * ssh(1): suppress "Connection to xxx closed" messages when LogLevel is set to "error" or above. bz3378 * ssh(1), sshd(8): use correct zlib flags when inflate(3)-ing compressed packet data. bz3372 * scp(1): when recursively transferring files in SFTP mode, create the destination directory if it doesn't already exist to match scp(1) in legacy RCP mode behaviour. * scp(1): many improvements in error message consistency between scp(1) in SFTP mode vs legacy RCP mode. * sshd(8): fix potential race in SIGTERM handling PR289 * ssh(1), ssh(8): since DSA keys are deprecated, move them to the end of the default list of public keys so that they will be tried last. PR295 * ssh-keygen(1): allow 'ssh-keygen -Y find-principals' to match wildcard principals in allowed_signers files = Portability * ssh(1), sshd(8): don't trust closefrom(2) on Linux. glibc's implementation does not work in a chroot when the kernel does not have close_range(2). It tries to read from /proc/self/fd and when that fails dies with an assertion of sorts. Instead, call close_range(2) directly from our compat code and fall back if that fails. bz#3349, * OS X poll(2) is broken; use compat replacement. For character- special devices like /dev/null, Darwin's poll(2) returns POLLNVAL when polled with POLLIN. Apparently this is Apple bug 3710161 - not public but a websearch will find other OSS projects rediscovering it periodically since it was first identified in 2005. * Correct handling of exceptfds/POLLPRI in our select(2)-based poll(2)/ppoll(2) compat implementation. * Cygwin: correct checking of mbstowcs() return value. * Add a basic SECURITY.md that refers people to the openssh.com website. * Enable additional compiler warnings and toolchain hardening flags, including -Wbitwise-instead-of-logical, -Wmisleading-indentation, -fzero-call-used-regs and -ftrivial-auto-var-init. * HP/UX. Use compat getline(3) on HP-UX 10.x, where the libc version is not reliable. - Rebased patches: * openssh-7.7p1-ldap.patch * openssh-8.0p1-gssapi-keyex.patch * openssh-8.1p1-audit.patch * openssh-8.4p1-vendordir.patch * openssh-reenable-dh-group14-sha1-default.patch OBS-URL: https://build.opensuse.org/request/show/960041 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=237
2022-03-08 08:49:22 +01:00
Index: openssh-8.9p1/sshd_config.5
Accepting request 922068 from home:hpjansson:branches:network - Version upgrade to 8.8p1 * No changes for askpass, see main package changelog for details - Version update to 8.8p1: = Security * sshd(8) from OpenSSH 6.2 through 8.7 failed to correctly initialise supplemental groups when executing an AuthorizedKeysCommand or AuthorizedPrincipalsCommand, where a AuthorizedKeysCommandUser or AuthorizedPrincipalsCommandUser directive has been set to run the command as a different user. Instead these commands would inherit the groups that sshd(8) was started with. Depending on system configuration, inherited groups may allow AuthorizedKeysCommand/AuthorizedPrincipalsCommand helper programs to gain unintended privilege. Neither AuthorizedKeysCommand nor AuthorizedPrincipalsCommand are enabled by default in sshd_config(5). = Potentially-incompatible changes * This release disables RSA signatures using the SHA-1 hash algorithm by default. This change has been made as the SHA-1 hash algorithm is cryptographically broken, and it is possible to create chosen-prefix hash collisions for <USD$50K. For most users, this change should be invisible and there is no need to replace ssh-rsa keys. OpenSSH has supported RFC8332 RSA/SHA-256/512 signatures since release 7.2 and existing ssh-rsa keys will automatically use the stronger algorithm where possible. Incompatibility is more likely when connecting to older SSH implementations that have not been upgraded or have not closely tracked improvements in the SSH protocol. For these cases, it may be necessary to selectively re-enable RSA/SHA1 to allow connection and/or user authentication via the HostkeyAlgorithms and PubkeyAcceptedAlgorithms options. = New features * ssh(1): allow the ssh_config(5) CanonicalizePermittedCNAMEs directive to accept a "none" argument to specify the default behaviour. = Bugfixes * scp(1): when using the SFTP protocol, continue transferring files after a transfer error occurs, better matching original scp/rcp behaviour. * ssh(1): fixed a number of memory leaks in multiplexing, * ssh-keygen(1): avoid crash when using the -Y find-principals command. * A number of documentation and manual improvements, including bz#3340, PR139, PR215, PR241, PR257 - Additional changes from 8.7p1 release: = Potentially-incompatible changes * scp(1): this release changes the behaviour of remote to remote copies (e.g. "scp host-a:/path host-b:") to transfer through the local host by default. This was previously available via the -3 flag. This mode avoids the need to expose credentials on the origin hop, avoids triplicate interpretation of filenames by the shell (by the local system, the copy origin and the destination) and, in conjunction with the SFTP support for scp(1) mentioned below, allows use of all authentication methods to the remote hosts (previously, only non-interactive methods could be used). A -R flag has been added to select the old behaviour. * ssh(1)/sshd(8): both the client and server are now using a stricter configuration file parser. The new parser uses more shell-like rules for quotes, space and escape characters. It is also more strict in rejecting configurations that include options lacking arguments. Previously some options (e.g. DenyUsers) could appear on a line with no subsequent arguments. This release will reject such configurations. The new parser will also reject configurations with unterminated quotes and multiple '=' characters after the option name. * ssh(1): when using SSHFP DNS records for host key verification, ssh(1) will verify all matching records instead of just those with the specific signature type requested. This may cause host key verification problems if stale SSHFP records of a different or legacy signature type exist alongside other records for a particular host. bz#3322 * ssh-keygen(1): when generating a FIDO key and specifying an explicit attestation challenge (using -Ochallenge), the challenge will now be hashed by the builtin security key middleware. This removes the (undocumented) requirement that challenges be exactly 32 bytes in length and matches the expectations of libfido2. * sshd(8): environment="..." directives in authorized_keys files are now first-match-wins and limited to 1024 discrete environment variable names. = New features * scp(1): experimental support for transfers using the SFTP protocol as a replacement for the venerable SCP/RCP protocol that it has traditionally used. SFTP offers more predictable filename handling and does not require expansion of glob(3) patterns via the shell on the remote side. * sftp-server(8): add a protocol extension to support expansion of ~/ and ~user/ prefixed paths. This was added to support these paths when used by scp(1) while in SFTP mode. * ssh(1): add a ForkAfterAuthentication ssh_config(5) counterpart to the ssh(1) -f flag. GHPR231 * ssh(1): add a StdinNull directive to ssh_config(5) that allows the config file to do the same thing as -n does on the ssh(1) command- line. GHPR231 * ssh(1): add a SessionType directive to ssh_config, allowing the configuration file to offer equivalent control to the -N (no session) and -s (subsystem) command-line flags. GHPR231 * ssh-keygen(1): allowed signers files used by ssh-keygen(1) signatures now support listing key validity intervals alongside they key, and ssh-keygen(1) can optionally check during signature verification whether a specified time falls inside this interval. This feature is intended for use by git to support signing and verifying objects using ssh keys. * ssh-keygen(8): support printing of the full public key in a sshsig signature via a -Oprint-pubkey flag. = Bugfixes * ssh(1)/sshd(8): start time-based re-keying exactly on schedule in the client and server mainloops. Previously the re-key timeout could expire but re-keying would not start until a packet was sent or received, causing a spin in select() if the connection was quiescent. * ssh-keygen(1): avoid Y2038 problem in printing certificate validity lifetimes. Dates past 2^31-1 seconds since epoch were displayed incorrectly on some platforms. bz#3329 * scp(1): allow spaces to appear in usernames for local to remote and scp -3 remote to remote copies. bz#1164 * ssh(1)/sshd(8): remove references to ChallengeResponseAuthentication in favour of KbdInteractiveAuthentication. The former is what was in SSHv1, the latter is what is in SSHv2 (RFC4256) and they were treated as somewhat but not entirely equivalent. We retain the old name as a deprecated alias so configuration files continue to work as well as a reference in the man page for people looking for it. bz#3303 * ssh(1)/ssh-add(1)/ssh-keygen(1): fix decoding of X.509 subject name when extracting a key from a PKCS#11 certificate. bz#3327 * ssh(1): restore blocking status on stdio fds before close. ssh(1) needs file descriptors in non-blocking mode to operate but it was not restoring the original state on exit. This could cause problems with fds shared with other programs via the shell, bz#3280 and GHPR246 * ssh(1)/sshd(8): switch both client and server mainloops from select(3) to pselect(3). Avoids race conditions where a signal may arrive immediately before select(3) and not be processed until an event fires. bz#2158 * ssh(1): sessions started with ControlPersist were incorrectly executing a shell when the -N (no shell) option was specified. bz#3290 * ssh(1): check if IPQoS or TunnelDevice are already set before overriding. Prevents values in config files from overriding values supplied on the command line. bz#3319 * ssh(1): fix debug message when finding a private key to match a certificate being attempted for user authentication. Previously it would print the certificate's path, whereas it was supposed to be showing the private key's path. GHPR247 * sshd(8): match host certificates against host public keys, not private keys. Allows use of certificates with private keys held in a ssh-agent. bz#3524 * ssh(1): add a workaround for a bug in OpenSSH 7.4 sshd(8), which allows RSA/SHA2 signatures for public key authentication but fails to advertise this correctly via SSH2_MSG_EXT_INFO. This causes clients of these server to incorrectly match PubkeyAcceptedAlgorithmse and potentially refuse to offer valid keys. bz#3213 * sftp(1)/scp(1): degrade gracefully if a sftp-server offers the limits@openssh.com extension but fails when the client tries to invoke it. bz#3318 * ssh(1): allow ssh_config SetEnv to override $TERM, which is otherwise handled specially by the protocol. Useful in ~/.ssh/config to set TERM to something generic (e.g. "xterm" instead of "xterm-256color") for destinations that lack terminfo entries. * sftp-server(8): the limits@openssh.com extension was incorrectly marked as an operation that writes to the filesystem, which made it unavailable in sftp-server read-only mode. bz#3318 * ssh(1): fix SEGV in UpdateHostkeys debug() message, triggered when the update removed more host keys than remain present. * Many manual page fixes. - Additional changes from 8.6p1 release: = Security * sshd(8): OpenSSH 8.5 introduced the LogVerbose keyword. When this option was enabled with a set of patterns that activated logging in code that runs in the low-privilege sandboxed sshd process, the log messages were constructed in such a way that printf(3) format strings could effectively be specified the low-privilege code. = New features * sftp-server(8): add a new limits@openssh.com protocol extension that allows a client to discover various server limits, including maximum packet size and maximum read/write length. * sftp(1): use the new limits@openssh.com extension (when available) to select better transfer lengths in the client. * sshd(8): Add ModuliFile keyword to sshd_config to specify the location of the "moduli" file containing the groups for DH-GEX. * unit tests: Add a TEST_SSH_ELAPSED_TIMES environment variable to enable printing of the elapsed time in seconds of each test. = Bugfixes * ssh_config(5), sshd_config(5): sync CASignatureAlgorithms lists in manual pages with the current default. GHPR174 * ssh(1): ensure that pkcs11_del_provider() is called before exit. GHPR234 * ssh(1), sshd(8): fix problems in string->argv conversion. Multiple backslashes were not being dequoted correctly and quoted space in the middle of a string was being incorrectly split. GHPR223 * ssh(1): return non-zero exit status when killed by signal; bz#3281 * sftp-server(8): increase maximum SSH2_FXP_READ to match the maximum packet size. Also handle zero-length reads that are not explicitly banned by the spec. - Additional changes from 8.5p1 release: = Security * ssh-agent(1): fixed a double-free memory corruption that was introduced in OpenSSH 8.2 . We treat all such memory faults as potentially exploitable. This bug could be reached by an attacker with access to the agent socket. = Potentially-incompatible changes * ssh(1), sshd(8): this release changes the first-preference signature algorithm from ECDSA to ED25519. * ssh(1), sshd(8): set the TOS/DSCP specified in the configuration for interactive use prior to TCP connect. The connection phase of the SSH session is time-sensitive and often explicitly interactive. The ultimate interactive/bulk TOS/DSCP will be set after authentication completes. * ssh(1), sshd(8): remove the pre-standardization cipher rijndael-cbc@lysator.liu.se. It is an alias for aes256-cbc before it was standardized in RFC4253 (2006), has been deprecated and disabled by default since OpenSSH 7.2 (2016) and was only briefly documented in ssh.1 in 2001. * ssh(1), sshd(8): update/replace the experimental post-quantum hybrid key exchange method based on Streamlined NTRU Prime coupled with X25519. The previous sntrup4591761x25519-sha512@tinyssh.org method is replaced with sntrup761x25519-sha512@openssh.com. * ssh(1): disable CheckHostIP by default. It provides insignificant benefits while making key rotation significantly more difficult, especially for hosts behind IP-based load-balancers. = New features * ssh(1): this release enables UpdateHostkeys by default subject to some conservative preconditions: - The key was matched in the UserKnownHostsFile (and not in the GlobalKnownHostsFile). - The same key does not exist under another name. - A certificate host key is not in use. - known_hosts contains no matching wildcard hostname pattern. - VerifyHostKeyDNS is not enabled. - The default UserKnownHostsFile is in use. * ssh(1), sshd(8): add a new LogVerbose configuration directive for that allows forcing maximum debug logging by file/function/line pattern-lists. * ssh(1): when prompting the user to accept a new hostkey, display any other host names/addresses already associated with the key. * ssh(1): allow UserKnownHostsFile=none to indicate that no known_hosts file should be used to identify host keys. * ssh(1): add a ssh_config KnownHostsCommand option that allows the client to obtain known_hosts data from a command in addition to the usual files. * ssh(1): add a ssh_config PermitRemoteOpen option that allows the client to restrict the destination when RemoteForward is used with SOCKS. * ssh(1): for FIDO keys, if a signature operation fails with a "incorrect PIN" reason and no PIN was initially requested from the user, then request a PIN and retry the operation. This supports some biometric devices that fall back to requiring PIN when reading of the biometric failed, and devices that require PINs for all hosted credentials. * sshd(8): implement client address-based rate-limiting via new sshd_config(5) PerSourceMaxStartups and PerSourceNetBlockSize directives that provide more fine-grained control on a per-origin address basis than the global MaxStartups limit. = Bugfixes * ssh(1): Prefix keyboard interactive prompts with "(user@host)" to make it easier to determine which connection they are associated with in cases like scp -3, ProxyJump, etc. bz#3224 * sshd(8): fix sshd_config SetEnv directives located inside Match blocks. GHPR201 * ssh(1): when requesting a FIDO token touch on stderr, inform the user once the touch has been recorded. * ssh(1): prevent integer overflow when ridiculously large ConnectTimeout values are specified, capping the effective value (for most platforms) at 24 days. bz#3229 * ssh(1): consider the ECDSA key subtype when ordering host key algorithms in the client. * ssh(1), sshd(8): rename the PubkeyAcceptedKeyTypes keyword to PubkeyAcceptedAlgorithms. The previous name incorrectly suggested that it control allowed key algorithms, when this option actually specifies the signature algorithms that are accepted. The previous name remains available as an alias. bz#3253 * ssh(1), sshd(8): similarly, rename HostbasedKeyTypes (ssh) and HostbasedAcceptedKeyTypes (sshd) to HostbasedAcceptedAlgorithms. * sftp-server(8): add missing lsetstat@openssh.com documentation and advertisement in the server's SSH2_FXP_VERSION hello packet. * ssh(1), sshd(8): more strictly enforce KEX state-machine by banning packet types once they are received. Fixes memleak caused by duplicate SSH2_MSG_KEX_DH_GEX_REQUEST (oss-fuzz #30078). * sftp(1): allow the full range of UIDs/GIDs for chown/chgrp on 32bit platforms instead of being limited by LONG_MAX. bz#3206 * Minor man page fixes (capitalization, commas, etc.) bz#3223 * sftp(1): when doing an sftp recursive upload or download of a read-only directory, ensure that the directory is created with write and execute permissions in the interim so that the transfer can actually complete, then set the directory permission as the final step. bz#3222 * ssh-keygen(1): document the -Z, check the validity of its argument earlier and provide a better error message if it's not correct. bz#2879 * ssh(1): ignore comments at the end of config lines in ssh_config, similar to what we already do for sshd_config. bz#2320 * sshd_config(5): mention that DisableForwarding is valid in a sshd_config Match block. bz3239 * sftp(1): fix incorrect sorting of "ls -ltr" under some circumstances. bz3248. * ssh(1), sshd(8): fix potential integer truncation of (unlikely) timeout values. bz#3250 * ssh(1): make hostbased authentication send the signature algorithm in its SSH2_MSG_USERAUTH_REQUEST packets instead of the key type. This make HostbasedAcceptedAlgorithms do what it is supposed to - filter on signature algorithm and not key type. - Rebased patches: * openssh-7.7p1-IPv6_X_forwarding.patch * openssh-7.7p1-X11_trusted_forwarding.patch * openssh-7.7p1-X_forward_with_disabled_ipv6.patch * openssh-7.7p1-cavstest-ctr.patch * openssh-7.7p1-cavstest-kdf.patch * openssh-7.7p1-disable_openssl_abi_check.patch * openssh-7.7p1-eal3.patch * openssh-7.7p1-enable_PAM_by_default.patch * openssh-7.7p1-fips.patch * openssh-7.7p1-fips_checks.patch * openssh-7.7p1-host_ident.patch * openssh-7.7p1-hostname_changes_when_forwarding_X.patch * openssh-7.7p1-ldap.patch * openssh-7.7p1-no_fork-no_pid_file.patch * openssh-7.7p1-pam_check_locks.patch * openssh-7.7p1-pts_names_formatting.patch * openssh-7.7p1-remove_xauth_cookies_on_exit.patch * openssh-7.7p1-seccomp_ipc_flock.patch * openssh-7.7p1-seccomp_stat.patch * openssh-7.7p1-send_locale.patch * openssh-7.7p1-sftp_force_permissions.patch * openssh-7.7p1-sftp_print_diagnostic_messages.patch * openssh-7.7p1-systemd-notify.patch * openssh-7.9p1-keygen-preserve-perms.patch * openssh-7.9p1-revert-new-qos-defaults.patch * openssh-8.0p1-gssapi-keyex.patch * openssh-8.1p1-audit.patch * openssh-8.1p1-seccomp-clock_gettime64.patch * openssh-8.1p1-seccomp-clock_nanosleep.patch * openssh-8.1p1-seccomp-clock_nanosleep_time64.patch * openssh-8.1p1-use-openssl-kdf.patch * openssh-8.4p1-vendordir.patch * openssh-fips-ensure-approved-moduli.patch * openssh-link-with-sk.patch * openssh-reenable-dh-group14-sha1-default.patch * openssh-whitelist-syscalls.patch - Removed openssh-fix-ssh-copy-id.patch (fixed upstream). OBS-URL: https://build.opensuse.org/request/show/922068 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=235
2021-10-07 10:06:58 +02:00
===================================================================
Accepting request 960041 from home:hpjansson:openssh-tw - Version update to 8.9p1: = Security * sshd(8): fix an integer overflow in the user authentication path that, in conjunction with other logic errors, could have yielded unauthenticated access under difficult to exploit conditions. This situation is not exploitable because of independent checks in the privilege separation monitor. Privilege separation has been enabled by default in since openssh-3.2.2 (released in 2002) and has been mandatory since openssh-7.5 (released in 2017). Moreover, portable OpenSSH has used toolchain features available in most modern compilers to abort on signed integer overflow since openssh-6.5 (released in 2014). Thanks to Malcolm Stagg for finding and reporting this bug. = Potentially-incompatible changes * sshd(8), portable OpenSSH only: this release removes in-built support for MD5-hashed passwords. If you require these on your system then we recommend linking against libxcrypt or similar. * This release modifies the FIDO security key middleware interface and increments SSH_SK_VERSION_MAJOR. = New features * ssh(1), sshd(8), ssh-add(1), ssh-agent(1): add a system for restricting forwarding and use of keys added to ssh-agent(1) A detailed description of the feature is available at https://www.openssh.com/agent-restrict.html and the protocol extensions are documented in the PROTOCOL and PROTOCOL.agent files in the source release. * ssh(1), sshd(8): add the sntrup761x25519-sha512@openssh.com hybrid ECDH/x25519 + Streamlined NTRU Prime post-quantum KEX to the default KEXAlgorithms list (after the ECDH methods but before the prime-group DH ones). The next release of OpenSSH is likely to make this key exchange the default method. * ssh-keygen(1): when downloading resident keys from a FIDO token, pass back the user ID that was used when the key was created and append it to the filename the key is written to (if it is not the default). Avoids keys being clobbered if the user created multiple resident keys with the same application string but different user IDs. * ssh-keygen(1), ssh(1), ssh-agent(1): better handling for FIDO keys on tokens that provide user verification (UV) on the device itself, including biometric keys, avoiding unnecessary PIN prompts. * ssh-keygen(1): add "ssh-keygen -Y match-principals" operation to perform matching of principals names against an allowed signers file. To be used towards a TOFU model for SSH signatures in git. * ssh-add(1), ssh-agent(1): allow pin-required FIDO keys to be added to ssh-agent(1). $SSH_ASKPASS will be used to request the PIN at authentication time. * ssh-keygen(1): allow selection of hash at sshsig signing time (either sha512 (default) or sha256). * ssh(1), sshd(8): read network data directly to the packet input buffer instead of indirectly via a small stack buffer. Provides a modest performance improvement. * ssh(1), sshd(8): read data directly to the channel input buffer, providing a similar modest performance improvement. * ssh(1): extend the PubkeyAuthentication configuration directive to accept yes|no|unbound|host-bound to allow control over one of the protocol extensions used to implement agent-restricted keys. = Bugfixes * sshd(8): document that CASignatureAlgorithms, ExposeAuthInfo and PubkeyAuthOptions can be used in a Match block. PR277. * sshd(8): fix possible string truncation when constructing paths to .rhosts/.shosts files with very long user home directory names. * ssh-keysign(1): unbreak for KEX algorithms that use SHA384/512 exchange hashes * ssh(1): don't put the TTY into raw mode when SessionType=none, avoids ^C being unable to kill such a session. bz3360 * scp(1): fix some corner-case bugs in SFTP-mode handling of ~-prefixed paths. * ssh(1): unbreak hostbased auth using RSA keys. Allow ssh(1) to select RSA keys when only RSA/SHA2 signature algorithms are configured (this is the default case). Previously RSA keys were not being considered in the default case. * ssh-keysign(1): make ssh-keysign use the requested signature algorithm and not the default for the key type. Part of unbreaking hostbased auth for RSA/SHA2 keys. * ssh(1): stricter UpdateHostkey signature verification logic on the client- side. Require RSA/SHA2 signatures for RSA hostkeys except when RSA/SHA1 was explicitly negotiated during initial KEX; bz3375 * ssh(1), sshd(8): fix signature algorithm selection logic for UpdateHostkeys on the server side. The previous code tried to prefer RSA/SHA2 for hostkey proofs of RSA keys, but missed some cases. This will use RSA/SHA2 signatures for RSA keys if the client proposed these algorithms in initial KEX. bz3375 * All: convert all uses of select(2)/pselect(2) to poll(2)/ppoll(2). This includes the mainloops in ssh(1), ssh-agent(1), ssh-agent(1) and sftp-server(8), as well as the sshd(8) listen loop and all other FD read/writability checks. On platforms with missing or broken poll(2)/ppoll(2) syscalls a select(2)-based compat shim is available. * ssh-keygen(1): the "-Y find-principals" command was verifying key validity when using ca certs but not with simple key lifetimes within the allowed signers file. * ssh-keygen(1): make sshsig verify-time argument parsing optional * sshd(8): fix truncation in rhosts/shosts path construction. * ssh(1), ssh-agent(1): avoid xmalloc(0) for PKCS#11 keyid for ECDSA keys (we already did this for RSA keys). Avoids fatal errors for PKCS#11 libraries that return empty keyid, e.g. Microchip ATECC608B "cryptoauthlib"; bz#3364 * ssh(1), ssh-agent(1): improve the testing of credentials against inserted FIDO: ask the token whether a particular key belongs to it in cases where the token supports on-token user-verification (e.g. biometrics) rather than just assuming that it will accept it. Will reduce spurious "Confirm user presence" notifications for key handles that relate to FIDO keys that are not currently inserted in at least some cases. bz3366 * ssh(1), sshd(8): correct value for IPTOS_DSCP_LE. It needs to allow for the preceding two ECN bits. bz#3373 * ssh-keygen(1): add missing -O option to usage() for the "-Y sign" option. * ssh-keygen(1): fix a NULL deref when using the find-principals function, when matching an allowed_signers line that contains a namespace restriction, but no restriction specified on the command-line * ssh-agent(1): fix memleak in process_extension(); oss-fuzz issue #42719 * ssh(1): suppress "Connection to xxx closed" messages when LogLevel is set to "error" or above. bz3378 * ssh(1), sshd(8): use correct zlib flags when inflate(3)-ing compressed packet data. bz3372 * scp(1): when recursively transferring files in SFTP mode, create the destination directory if it doesn't already exist to match scp(1) in legacy RCP mode behaviour. * scp(1): many improvements in error message consistency between scp(1) in SFTP mode vs legacy RCP mode. * sshd(8): fix potential race in SIGTERM handling PR289 * ssh(1), ssh(8): since DSA keys are deprecated, move them to the end of the default list of public keys so that they will be tried last. PR295 * ssh-keygen(1): allow 'ssh-keygen -Y find-principals' to match wildcard principals in allowed_signers files = Portability * ssh(1), sshd(8): don't trust closefrom(2) on Linux. glibc's implementation does not work in a chroot when the kernel does not have close_range(2). It tries to read from /proc/self/fd and when that fails dies with an assertion of sorts. Instead, call close_range(2) directly from our compat code and fall back if that fails. bz#3349, * OS X poll(2) is broken; use compat replacement. For character- special devices like /dev/null, Darwin's poll(2) returns POLLNVAL when polled with POLLIN. Apparently this is Apple bug 3710161 - not public but a websearch will find other OSS projects rediscovering it periodically since it was first identified in 2005. * Correct handling of exceptfds/POLLPRI in our select(2)-based poll(2)/ppoll(2) compat implementation. * Cygwin: correct checking of mbstowcs() return value. * Add a basic SECURITY.md that refers people to the openssh.com website. * Enable additional compiler warnings and toolchain hardening flags, including -Wbitwise-instead-of-logical, -Wmisleading-indentation, -fzero-call-used-regs and -ftrivial-auto-var-init. * HP/UX. Use compat getline(3) on HP-UX 10.x, where the libc version is not reliable. - Rebased patches: * openssh-7.7p1-ldap.patch * openssh-8.0p1-gssapi-keyex.patch * openssh-8.1p1-audit.patch * openssh-8.4p1-vendordir.patch * openssh-reenable-dh-group14-sha1-default.patch OBS-URL: https://build.opensuse.org/request/show/960041 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=237
2022-03-08 08:49:22 +01:00
--- openssh-8.9p1.orig/sshd_config.5
+++ openssh-8.9p1/sshd_config.5
@@ -996,7 +996,7 @@ ecdh-sha2-nistp256,ecdh-sha2-nistp384,ec
Accepting request 1087770 from home:alarrosa:branches:network - Update to openssh 9.3p1 * No changes for askpass, see main package changelog for details - Update to openssh 9.3p1: = Security * ssh-add(1): when adding smartcard keys to ssh-agent(1) with the per-hop destination constraints (ssh-add -h ...) added in OpenSSH 8.9, a logic error prevented the constraints from being communicated to the agent. This resulted in the keys being added without constraints. The common cases of non-smartcard keys and keys without destination constraints are unaffected. This problem was reported by Luci Stanescu. * ssh(1): Portable OpenSSH provides an implementation of the getrrsetbyname(3) function if the standard library does not provide it, for use by the VerifyHostKeyDNS feature. A specifically crafted DNS response could cause this function to perform an out-of-bounds read of adjacent stack data, but this condition does not appear to be exploitable beyond denial-of- service to the ssh(1) client. The getrrsetbyname(3) replacement is only included if the system's standard library lacks this function and portable OpenSSH was not compiled with the ldns library (--with-ldns). getrrsetbyname(3) is only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This problem was found by the Coverity static analyzer. = New features * ssh-keygen(1), ssh-keyscan(1): accept -Ohashalg=sha1|sha256 when outputting SSHFP fingerprints to allow algorithm selection. bz3493 OBS-URL: https://build.opensuse.org/request/show/1087770 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=247
2023-05-22 21:32:26 +02:00
ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,
Accepting request 866139 from home:hpjansson:branches:network - Improve robustness of sshd init detection when upgrading from a pre-systemd distribution. - Add openssh-reenable-dh-group14-sha1-default.patch, which adds diffie-hellman-group14-sha1 key exchange back to the default list (bsc#1180958). This is needed for backwards compatibility with older platforms. OBS-URL: https://build.opensuse.org/request/show/866139 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=224
2021-01-23 00:06:22 +01:00
diffie-hellman-group-exchange-sha256,
diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,
-diffie-hellman-group14-sha256
+diffie-hellman-group14-sha256,diffie-hellman-group14-sha1
.Ed
.Pp
The list of available key exchange algorithms may also be obtained using
Copy Permalink