rpm/openssh
SHA256
1
0
Fork 0
forked from pool/openssh
Code Pull Requests Activity
c1e40270e4
openssh/openssh-askpass-gnome.changes

271 lines
9.9 KiB
Plaintext
Raw Normal View History

Accepting request 642573 from home:scarabeus_iv:branches:network - Update to 7.8p1: * no actual changes for the askpass - Format with spec-cleaner - Respect cflags - Use gtk3 rather than gtk2 which is being phased out - Remove the mention of the SLE12 in the README.SUSE - Install firewall rules only when really needed (<SLE15) - Version update to 7.8p1: * For most details see release notes file * ssh-keygen(1): write OpenSSH format private keys by default instead of using OpenSSL's PEM format - Rebase patches to apply on 7.8p1 release: * openssh-7.7p1-fips.patch * openssh-7.7p1-cavstest-kdf.patch * openssh-7.7p1-fips_checks.patch * openssh-7.7p1-gssapi_key_exchange.patch * openssh-7.7p1-audit.patch * openssh-7.7p1-openssl_1.1.0.patch * openssh-7.7p1-ldap.patch * openssh-7.7p1-IPv6_X_forwarding.patch * openssh-7.7p1-sftp_print_diagnostic_messages.patch * openssh-7.7p1-disable_short_DH_parameters.patch * openssh-7.7p1-hostname_changes_when_forwarding_X.patch * openssh-7.7p1-pam_check_locks.patch * openssh-7.7p1-seed-prng.patch * openssh-7.7p1-systemd-notify.patch * openssh-7.7p1-X11_trusted_forwarding.patch - Dropped patches: OBS-URL: https://build.opensuse.org/request/show/642573 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=153
2018-10-17 10:57:56 +02:00
-------------------------------------------------------------------
Tue Oct 9 10:52:15 UTC 2018 - Tomáš Chvátal <tchvatal@suse.com>
- Update to 7.8p1:
* no actual changes for the askpass
- Format with spec-cleaner
- Respect cflags
- Use gtk3 rather than gtk2 which is being phased out
Accepting request 611002 from home:pcerny:factory - Upgrade to 7.7p1 (bsc#1094068) - Upgrade to 7.7p1 (bsc#1094068) Most important changes (more details below): * Drop compatibility support for pre-2001 SSH implementations * sshd(1) does not load DSA keys by default Distilled upstream log: ---- Potentially-incompatible changes * ssh(1)/sshd(8): Drop compatibility support for some very old SSH implementations, including ssh.com <=2.* and OpenSSH <= 3.*. These versions were all released in or before 2001 and predate the final SSH RFCs. The support in question isn't necessary for RFC-compliant SSH implementations. ---- New Features * experimental support for PQC XMSS keys (Extended Hash-Based Signatures), not compiled in by default. * sshd(8): Add a "rdomain" criteria for the sshd_config Match keyword to allow conditional configuration that depends on which routing domain a connection was received on (currently supported on OpenBSD and Linux). * sshd_config(5): Add an optional rdomain qualifier to the ListenAddress directive to allow listening on different routing domains. This is supported only on OpenBSD and Linux at present. * sshd_config(5): Add RDomain directive to allow the authenticated session to be placed in an explicit routing domain. This is only supported on OpenBSD at present. * sshd(8): Add "expiry-time" option for authorized_keys files to allow for expiring keys. * ssh(1): Add a BindInterface option to allow binding the OBS-URL: https://build.opensuse.org/request/show/611002 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=145
2018-05-21 23:57:42 +02:00
-------------------------------------------------------------------
Mon May 21 15:19:03 UTC 2018 - pcerny@suse.com
- Upgrade to 7.7p1 (bsc#1094068)
Accepting request 571576 from home:pcerny:factory - .spec file cleanup - upgrade to 7.6p1 see main package changelog for details - Add missing crypto hardware enablement patches for IBM mainframes (FATE#323902) - add missing part of systemd integration (unit type) OBS-URL: https://build.opensuse.org/request/show/571576 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=134
2018-02-01 01:18:29 +01:00
-------------------------------------------------------------------
Wed Jan 31 22:54:55 UTC 2018 - pcerny@suse.com
- .spec file cleanup
-------------------------------------------------------------------
Fri Nov 3 12:27:18 UTC 2017 - pcerny@suse.com
- upgrade to 7.6p1
see main package changelog for details
- fixed url, added gpg signature - added gpg signature and keyring from http://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh_gzsig_key.pub OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=108
2016-07-25 15:47:29 +02:00
-------------------------------------------------------------------
Mon Jul 25 13:45:53 UTC 2016 - meissner@suse.com
- fixed url
Accepting request 398802 from home:pcerny:factory - upgrade to 7.2p2 - changing license to 2-clause BSD to match source - enable trusted X11 forwarding by default [-X11_trusted_forwarding] - set UID for lastlog properly [-lastlog] - enable use of PAM by default [-enable_PAM_by_default] - copy command line arguments properly [-saveargv-fix] - do not use pthreads in PAM code [-dont_use_pthreads_in_PAM] - fix paths in documentation [-eal3] - prevent race consitions triggered by SIGALRM [-blocksigalrm] - do send and accept locale environment variables by default [-send_locale] - handle hostnames changes during X forwarding [-hostname_changes_when_forwarding_X] - try to remove xauth cookies on exit [-remove_xauth_cookies_on_exit] - properly format pts names for ?tmp? log files [-pts_names_formatting] - check locked accounts when using PAM [-pam_check_locks] - chenge default PermitRootLogin to 'yes' to prevent unwanted surprises on updates from older versions. See README.SUSE for details [-allow_root_password_login] - Disable DH parameters under 2048 bits by default and allow lowering the limit back to the RFC 4419 specified minimum through an option (bsc#932483, bsc#948902) [-disable_short_DH_parameters] - Add getuid() and stat() syscalls to the seccomp filter OBS-URL: https://build.opensuse.org/request/show/398802 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=103
2016-05-30 03:36:18 +02:00
-------------------------------------------------------------------
Sun Apr 17 23:27:51 UTC 2016 - pcerny@suse.com
- upgrade to 7.2p2
-------------------------------------------------------------------
Tue Feb 10 13:28:56 UTC 2015 - pcerny@suse.com
- changing license to 2-clause BSD to match source
Accepting request 230097 from home:pcerny:factory - Update of the underlying OpenSSH to 6.6p1 - update to 6.6p1 Security: * sshd(8): when using environment passing with a sshd_config(5) AcceptEnv pattern with a wildcard. OpenSSH prior to 6.6 could be tricked into accepting any enviornment variable that contains the characters before the wildcard character. Features since 6.5p1: * ssh(1), sshd(8): removal of the J-PAKE authentication code, which was experimental, never enabled and has been unmaintained for some time. * ssh(1): skip 'exec' clauses other clauses predicates failed to match while processing Match blocks. * ssh(1): if hostname canonicalisation is enabled and results in the destination hostname being changed, then re-parse ssh_config(5) files using the new destination hostname. This gives 'Host' and 'Match' directives that use the expanded hostname a chance to be applied. Bugfixes: * ssh(1): avoid spurious "getsockname failed: Bad file descriptor" in ssh -W. bz#2200, debian#738692 * sshd(8): allow the shutdown(2) syscall in seccomp-bpf and systrace sandbox modes, as it is reachable if the connection is terminated during the pre-auth phase. * ssh(1), sshd(8): fix unsigned overflow that in SSH protocol 1 bignum parsing. Minimum key length checks render this bug unexploitable to compromise SSH 1 sessions. * sshd_config(5): clarify behaviour of a keyword that appears in multiple matching Match blocks. bz#2184 OBS-URL: https://build.opensuse.org/request/show/230097 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=76
2014-04-14 23:53:01 +02:00
-------------------------------------------------------------------
Fri Apr 11 21:50:51 UTC 2014 - pcerny@suse.com
- Update of the underlying OpenSSH to 6.6p1
Accepting request 222365 from home:pcerny:factory - Update of the underlying OpenSSH to 6.5p1 - Update to 6.5p1 Features since 6.4p1: * ssh(1), sshd(8): support for key exchange using ECDH in Daniel Bernstein's Curve25519; default when both the client and server support it. * ssh(1), sshd(8): support for Ed25519 as a public key type fo rboth server and client. Ed25519 is an EC signature offering better security than ECDSA and DSA and good performance. * Add a new private key format that uses a bcrypt KDF to better protect keys at rest. Used unconditionally for Ed25519 keys, on demand for other key types via the -o ssh-keygen(1) option. Intended to become default in the near future. Details documented in PROTOCOL.key. * ssh(1), sshd(8): new transport cipher "chacha20-poly1305@openssh.com" combining Daniel Bernstein's ChaCha20 stream cipher and Poly1305 MAC to build an authenticated encryption mode. Details documented PROTOCOL.chacha20poly1305. * ssh(1), sshd(8): refuse RSA keys from old proprietary clients and servers that use the obsolete RSA+MD5 signature scheme. It will still be possible to connect with these clients/servers but only DSA keys will be accepted, and OpenSSH will refuse connection entirely in a future release. * ssh(1), sshd(8): refuse old proprietary clients and servers that use a weaker key exchange hash calculation. * ssh(1): increase the size of the Diffie-Hellman groups requested for each symmetric key size. New values from NIST Special Publication 800-57 with the upper limit specified by OBS-URL: https://build.opensuse.org/request/show/222365 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=63
2014-02-14 15:54:10 +01:00
-------------------------------------------------------------------
Wed Feb 12 01:24:16 UTC 2014 - pcerny@suse.com
- Update of the underlying OpenSSH to 6.5p1
Accepting request 220466 from home:pcerny:factory - Update of the underlying OpenSSH to 6.4p1 - Update to 6.4p1 Features since 6.2p2: * ssh-agent(1) support in sshd(8); allows encrypted hostkeys, or hostkeys on smartcards. * ssh(1)/sshd(8): allow optional time-based rekeying via a second argument to the existing RekeyLimit option. RekeyLimit is now supported in sshd_config as well as on the client. * sshd(8): standardise logging of information during user authentication. * The presented key/cert and the remote username (if available) is now logged in the authentication success/failure message on the same log line as the local username, remote host/port and protocol in use. Certificates contents and the key fingerprint of the signing CA are logged too. * ssh(1) ability to query what cryptographic algorithms are supported in the binary. * ssh(1): ProxyCommand=- for cases where stdin and stdout already point to the proxy. * ssh(1): allow IdentityFile=none * ssh(1)/sshd(8): -E option to append debugging logs to a specified file instead of stderr or syslog. * sftp(1): support resuming partial downloads with the "reget" command and on the sftp commandline or on the "get" commandline with the "-a" (append) option. * ssh(1): "IgnoreUnknown" configuration option to selectively suppress errors arising from unknown configuration directives. * sshd(8): support for submethods to be appended to required authentication methods listed via AuthenticationMethods. OBS-URL: https://build.opensuse.org/request/show/220466 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=58
2014-01-31 13:18:41 +01:00
-------------------------------------------------------------------
Fri Jan 24 15:13:09 UTC 2014 - pcerny@suse.com
- Update of the underlying OpenSSH to 6.4p1
Accepting request 185789 from home:elvigia:branches:network - Update for 6.2p2 - Update to version 6.2p2 * ssh(1)/sshd(8): Added support for AES-GCM authenticated encryption * ssh(1)/sshd(8): Added support for encrypt-then-mac (EtM) MAC modes * ssh(1)/sshd(8): Added support for the UMAC-128 MAC * sshd(8): Added support for multiple required authentication * sshd(8)/ssh-keygen(1): Added support for Key Revocation Lists * ssh(1): When SSH protocol 2 only is selected (the default), ssh(1) now immediately sends its SSH protocol banner to the server without waiting to receive the server's banner, saving time when connecting. * dozens of other changes, see http://www.openssh.org/txt/release-6.2 OBS-URL: https://build.opensuse.org/request/show/185789 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=51
2013-08-05 09:15:19 +02:00
-------------------------------------------------------------------
Accepting request 199679 from home:pcerny:factory - spec file cleanup (don't pointelssly build whole OpenSSH) - spec file and patch cleanup * removing obsoleted auditing patch (openssh-%{version}-audit.patch) - added patches from SLE * GSSAPI key exchange * FIPS enablement (currently disabled) * small bugfixes - split the LDAP helper into a separate package: openssh-akc-ldap OBS-URL: https://build.opensuse.org/request/show/199679 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=55
2013-09-19 06:09:33 +02:00
Thu Sep 19 02:02:56 UTC 2013 - pcerny@suse.com
- spec file cleanup (don't pointelssly build whole OpenSSH)
-------------------------------------------------------------------
Accepting request 185789 from home:elvigia:branches:network - Update for 6.2p2 - Update to version 6.2p2 * ssh(1)/sshd(8): Added support for AES-GCM authenticated encryption * ssh(1)/sshd(8): Added support for encrypt-then-mac (EtM) MAC modes * ssh(1)/sshd(8): Added support for the UMAC-128 MAC * sshd(8): Added support for multiple required authentication * sshd(8)/ssh-keygen(1): Added support for Key Revocation Lists * ssh(1): When SSH protocol 2 only is selected (the default), ssh(1) now immediately sends its SSH protocol banner to the server without waiting to receive the server's banner, saving time when connecting. * dozens of other changes, see http://www.openssh.org/txt/release-6.2 OBS-URL: https://build.opensuse.org/request/show/185789 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=51
2013-08-05 09:15:19 +02:00
Sat Aug 3 18:12:20 UTC 2013 - crrodriguez@opensuse.org
- Update for 6.2p2
- Updated to 6.1p1, a bugfix release Features: * sshd(8): This release turns on pre-auth sandboxing sshd by default for new installs, by setting UsePrivilegeSeparation=sandbox in sshd_config. * ssh-keygen(1): Add options to specify starting line number and number of lines to process when screening moduli candidates, allowing processing of different parts of a candidate moduli file in parallel * sshd(8): The Match directive now supports matching on the local (listen) address and port upon which the incoming connection was received via LocalAddress and LocalPort clauses. * sshd(8): Extend sshd_config Match directive to allow setting AcceptEnv and {Allow,Deny}{Users,Groups} * Add support for RFC6594 SSHFP DNS records for ECDSA key types. bz#1978 * ssh-keygen(1): Allow conversion of RSA1 keys to public PEM and PKCS8 * sshd(8): Allow the sshd_config PermitOpen directive to accept "none" as an argument to refuse all port-forwarding requests. * sshd(8): Support "none" as an argument for AuthorizedPrincipalsFile * ssh-keyscan(1): Look for ECDSA keys by default. bz#1971 * sshd(8): Add "VersionAddendum" to sshd_config to allow server operators to append some arbitrary text to the server SSH protocol banner. Bugfixes: * ssh(1)/sshd(8): Don't spin in accept() in situations of file descriptor exhaustion. Instead back off for a while. * ssh(1)/sshd(8): Remove hmac-sha2-256-96 and hmac-sha2-512-96 MACs as they were removed from the specification. bz#2023, * sshd(8): Handle long comments in config files better. bz#2025 * ssh(1): Delay setting tty_flag so RequestTTY options are correctly picked up. bz#1995 * sshd(8): Fix handling of /etc/nologin incorrectly being applied to root on platforms that use login_cap. OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=42
2012-11-13 11:50:53 +01:00
-------------------------------------------------------------------
Tue Nov 13 10:51:12 UTC 2012 - meissner@suse.com
- Updated to 6.1p1, a bugfix release
Features:
* sshd(8): This release turns on pre-auth sandboxing sshd by default for
new installs, by setting UsePrivilegeSeparation=sandbox in sshd_config.
* ssh-keygen(1): Add options to specify starting line number and number of
lines to process when screening moduli candidates, allowing processing
of different parts of a candidate moduli file in parallel
* sshd(8): The Match directive now supports matching on the local (listen)
address and port upon which the incoming connection was received via
LocalAddress and LocalPort clauses.
* sshd(8): Extend sshd_config Match directive to allow setting AcceptEnv
and {Allow,Deny}{Users,Groups}
* Add support for RFC6594 SSHFP DNS records for ECDSA key types. bz#1978
* ssh-keygen(1): Allow conversion of RSA1 keys to public PEM and PKCS8
* sshd(8): Allow the sshd_config PermitOpen directive to accept "none" as
an argument to refuse all port-forwarding requests.
* sshd(8): Support "none" as an argument for AuthorizedPrincipalsFile
* ssh-keyscan(1): Look for ECDSA keys by default. bz#1971
* sshd(8): Add "VersionAddendum" to sshd_config to allow server operators
to append some arbitrary text to the server SSH protocol banner.
Bugfixes:
* ssh(1)/sshd(8): Don't spin in accept() in situations of file
descriptor exhaustion. Instead back off for a while.
* ssh(1)/sshd(8): Remove hmac-sha2-256-96 and hmac-sha2-512-96 MACs as
they were removed from the specification. bz#2023,
* sshd(8): Handle long comments in config files better. bz#2025
* ssh(1): Delay setting tty_flag so RequestTTY options are correctly
picked up. bz#1995
* sshd(8): Fix handling of /etc/nologin incorrectly being applied to root
on platforms that use login_cap.
Portable OpenSSH:
* sshd(8): Allow sshd pre-auth sandboxing to fall-back to the rlimit
sandbox from the Linux SECCOMP filter sandbox when the latter is
not available in the kernel.
* ssh(1): Fix NULL dereference when built with LDNS and using DNSSEC to
retrieve a CNAME SSHFP record.
* Fix cross-compilation problems related to pkg-config. bz#1996
Accepting request 126286 from home:coolo:branches:openSUSE:Factory - the gnome askpass does not require the x11 askpass - especially not in the version of openssh (it's at 1.X) OBS-URL: https://build.opensuse.org/request/show/126286 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=33
2012-06-27 12:11:02 +02:00
-------------------------------------------------------------------
Wed Jun 27 09:51:19 UTC 2012 - coolo@suse.com
- the gnome askpass does not require the x11 askpass - especially not
in the version of openssh (it's at 1.X)
- use correct tarball url - update to 6.0p1. - use correct download url and tarball format. OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=28
2012-05-29 09:15:29 +02:00
-------------------------------------------------------------------
Tue May 29 07:14:53 UTC 2012 - meissner@suse.com
- use correct tarball url
- update to 6.0p1.
Accepting request 111545 from home:a_jaeger:FactoryFix Fix build. OBS-URL: https://build.opensuse.org/request/show/111545 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=23
2012-03-30 16:20:49 +02:00
-------------------------------------------------------------------
Wed Mar 28 11:42:32 UTC 2012 - aj@suse.de
- Add build require on autoconf and automake.
Accepting request 97537 from home:coolo:removeautoconf add autoconf to buildrequires OBS-URL: https://build.opensuse.org/request/show/97537 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=18
2011-12-21 18:59:28 +01:00
-------------------------------------------------------------------
Wed Dec 21 10:31:42 UTC 2011 - coolo@suse.com
- remove call to suse_update_config (very old work around)
Accepting request 88642 from home:pcerny:factory - Update to 5.9p1 * sandboxing privsep child through rlimit - spec files and sources cleanup - removed bogus key size from init script OBS-URL: https://build.opensuse.org/request/show/88642 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=14
2011-10-19 04:18:13 +02:00
-------------------------------------------------------------------
Wed Oct 19 00:40:15 UTC 2011 - pcerny@suse.com
- Update to 5.9p1
Accepting request 60057 from home:leonardocf:branches:network reviewed ok. OBS-URL: https://build.opensuse.org/request/show/60057 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=7
2011-02-04 14:58:22 +01:00
-------------------------------------------------------------------
Fri Feb 4 11:19:14 UTC 2011 - lchiquitto@novell.com
- Update to 5.8p1
Accepting request 59094 from home:leonardocf:branches:network ok OBS-URL: https://build.opensuse.org/request/show/59094 OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=4
2011-01-31 13:24:57 +01:00
-------------------------------------------------------------------
Mon Jan 24 11:51:10 UTC 2011 - lchiquitto@novell.com
- Update to 5.7p1
Accepting request 57969 from network Accepted submit request 57969 from user sbrabec OBS-URL: https://build.opensuse.org/request/show/57969 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssh?expand=0&rev=60
2011-01-14 01:30:23 +01:00
-------------------------------------------------------------------
Wed Jan 12 13:37:38 CET 2011 - sbrabec@suse.cz
- Removed relics of no more implemented opensc support.
Accepting request 46105 from Base:System Copy from Base:System/openssh based on submit request 46105 from user anicka OBS-URL: https://build.opensuse.org/request/show/46105 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssh?expand=0&rev=48
2010-08-24 17:31:11 +02:00
-------------------------------------------------------------------
Tue Aug 24 15:50:17 CEST 2010 - anicka@suse.cz
- update to 5.6p1
Accepting request 35778 from Base:System Copy from Base:System/openssh based on submit request 35778 from user anicka OBS-URL: https://build.opensuse.org/request/show/35778 OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssh?expand=0&rev=39
2010-03-26 16:29:14 +01:00
-------------------------------------------------------------------
Fri Mar 26 11:04:59 CET 2010 - anicka@suse.cz
- update to 5.4p1
- remove -pam-fix4.diff (in upstream now)
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssh?expand=0&rev=25
2009-03-03 22:42:45 +01:00
-------------------------------------------------------------------
Mon Feb 23 17:27:22 CET 2009 - anicka@suse.cz
- update to 5.2p1
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssh?expand=0&rev=16
2008-04-09 22:21:23 +02:00
-------------------------------------------------------------------
Wed Apr 9 14:35:42 CEST 2008 - anicka@suse.cz
- update to 5.0p1
-------------------------------------------------------------------
Wed Apr 2 15:06:01 CEST 2008 - anicka@suse.cz
- update to 4.9p1
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssh?expand=0&rev=12
2007-12-06 16:29:46 +01:00
-------------------------------------------------------------------
Wed Dec 5 10:56:07 CET 2007 - anicka@suse.cz
- - update to 4.7p1
* Add "-K" flag for ssh to set GSSAPIAuthentication=yes and
GSSAPIDelegateCredentials=yes. This is symmetric with -k
* make scp try to skip FIFOs rather than blocking when nothing is
listening.
* increase default channel windows
* put the MAC list into a display
* many bugfixes
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssh?expand=0&rev=1
2007-01-07 17:26:05 +01:00
-------------------------------------------------------------------
Tue Dec 12 14:44:41 CET 2006 - anicka@suse.cz
- update to 4.5p1
* Use privsep_pw if we have it, but only require it if we
absolutely need it.
* Correctly check for bad signatures in the monitor, otherwise
the monitor and the unpriv process can get out of sync.
* Clear errno before calling the strtol functions.
* exit instead of doing a blocking tcp send if we detect
a client/server timeout, since the tcp sendqueue might
be already full (of alive requests)
* include signal.h, errno.h, sys/in.h
* some more bugfixes
-------------------------------------------------------------------
Wed Oct 4 12:56:40 CEST 2006 - postadal@suse.cz
- updated to version 4.4p1 [#208662]
* fixed pre-authentication DoS, that would cause sshd(8) to spin
until the login grace time expired
* fixed unsafe signal hander, which was vulnerable to a race condition
that could be exploited to perform a pre-authentication DoS
* fixed a GSSAPI authentication abort that could be used to determine
the validity of usernames on some platforms
* implemented conditional configuration in sshd_config(5) using the
"Match" directive
* added support for Diffie-Hellman group exchange key agreement with a
final hash of SHA256
* added a "ForceCommand", "PermitOpen" directive to sshd_config(5)
* added optional logging of transactions to sftp-server(8)
* ssh(1) will now record port numbers for hosts stored in
~/.ssh/authorized_keys when a non-standard port has been requested
* added an "ExitOnForwardFailure" option to cause ssh(1) to exit (with
a non-zero exit code) when requested port forwardings could not be
established
* extended sshd_config(5) "SubSystem" declarations to allow the
specification of command-line arguments
- removed obsoleted patches: autoconf-fix.patch
-------------------------------------------------------------------
Tue Jul 25 13:40:10 CEST 2006 - schwab@suse.de
- Fix syntax error in configure script.
-------------------------------------------------------------------
Wed Jan 25 21:39:06 CET 2006 - mls@suse.de
- converted neededforbuild to BuildRequires
-------------------------------------------------------------------
Tue Jan 3 15:54:49 CET 2006 - postadal@suse.cz
- updated to version 4.2p1
- removed obsoleted patches: upstream_fixes.diff, gssapi-secfix.patch
-------------------------------------------------------------------
Thu Sep 8 16:20:06 CEST 2005 - postadal@suse.cz
- don't strip
-------------------------------------------------------------------
Thu Aug 4 11:30:18 CEST 2005 - uli@suse.de
- parallelize build
-------------------------------------------------------------------
Fri Jun 10 16:24:22 CEST 2005 - postadal@suse.cz
- updated to version 4.1p1
- removed obsoleted patches: restore_terminal, pam-returnfromsession,
timing-attacks-fix, krb5ccname, gssapi-pam, logdenysource,
sendenv-fix, documentation-fix
-------------------------------------------------------------------
Wed Jan 19 18:25:29 CET 2005 - postadal@suse.cz
- renamed askpass-gnome package to openssh-askpass-gnome
-------------------------------------------------------------------
Wed Jan 19 15:58:07 CET 2005 - postadal@suse.cz
- splited spec file to decreas number of build dependencies
Copy Permalink