- Update to 7.8p1:
* no actual changes for the askpass
- Format with spec-cleaner
- Respect cflags
- Use gtk3 rather than gtk2 which is being phased out
- Remove the mention of the SLE12 in the README.SUSE
- Install firewall rules only when really needed (<SLE15)
- Version update to 7.8p1:
* For most details see release notes file
* ssh-keygen(1): write OpenSSH format private keys by default
instead of using OpenSSL's PEM format
- Rebase patches to apply on 7.8p1 release:
* openssh-7.7p1-fips.patch
* openssh-7.7p1-cavstest-kdf.patch
* openssh-7.7p1-fips_checks.patch
* openssh-7.7p1-gssapi_key_exchange.patch
* openssh-7.7p1-audit.patch
* openssh-7.7p1-openssl_1.1.0.patch
* openssh-7.7p1-ldap.patch
* openssh-7.7p1-IPv6_X_forwarding.patch
* openssh-7.7p1-sftp_print_diagnostic_messages.patch
* openssh-7.7p1-disable_short_DH_parameters.patch
* openssh-7.7p1-hostname_changes_when_forwarding_X.patch
* openssh-7.7p1-pam_check_locks.patch
* openssh-7.7p1-seed-prng.patch
* openssh-7.7p1-systemd-notify.patch
* openssh-7.7p1-X11_trusted_forwarding.patch
- Dropped patches: (forwarded request 642573 from scarabeus_iv)
OBS-URL: https://build.opensuse.org/request/show/642574
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssh?expand=0&rev=122
- Update to 7.8p1:
* no actual changes for the askpass
- Format with spec-cleaner
- Respect cflags
- Use gtk3 rather than gtk2 which is being phased out
- Remove the mention of the SLE12 in the README.SUSE
- Install firewall rules only when really needed (<SLE15)
- Version update to 7.8p1:
* For most details see release notes file
* ssh-keygen(1): write OpenSSH format private keys by default
instead of using OpenSSL's PEM format
- Rebase patches to apply on 7.8p1 release:
* openssh-7.7p1-fips.patch
* openssh-7.7p1-cavstest-kdf.patch
* openssh-7.7p1-fips_checks.patch
* openssh-7.7p1-gssapi_key_exchange.patch
* openssh-7.7p1-audit.patch
* openssh-7.7p1-openssl_1.1.0.patch
* openssh-7.7p1-ldap.patch
* openssh-7.7p1-IPv6_X_forwarding.patch
* openssh-7.7p1-sftp_print_diagnostic_messages.patch
* openssh-7.7p1-disable_short_DH_parameters.patch
* openssh-7.7p1-hostname_changes_when_forwarding_X.patch
* openssh-7.7p1-pam_check_locks.patch
* openssh-7.7p1-seed-prng.patch
* openssh-7.7p1-systemd-notify.patch
* openssh-7.7p1-X11_trusted_forwarding.patch
- Dropped patches:
OBS-URL: https://build.opensuse.org/request/show/642573
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=153
- Upgrade to 7.7p1 (bsc#1094068)
- Upgrade to 7.7p1 (bsc#1094068)
Most important changes (more details below):
* Drop compatibility support for pre-2001 SSH implementations
* sshd(1) does not load DSA keys by default
Distilled upstream log:
---- Potentially-incompatible changes
* ssh(1)/sshd(8): Drop compatibility support for some very old
SSH implementations, including ssh.com <=2.* and OpenSSH <=
3.*. These versions were all released in or before 2001 and
predate the final SSH RFCs. The support in question isn't
necessary for RFC-compliant SSH implementations.
---- New Features
* experimental support for PQC XMSS keys (Extended Hash-Based
Signatures), not compiled in by default.
* sshd(8): Add a "rdomain" criteria for the sshd_config Match
keyword to allow conditional configuration that depends on
which routing domain a connection was received on (currently
supported on OpenBSD and Linux).
* sshd_config(5): Add an optional rdomain qualifier to the
ListenAddress directive to allow listening on different
routing domains. This is supported only on OpenBSD and Linux
at present.
* sshd_config(5): Add RDomain directive to allow the
authenticated session to be placed in an explicit routing
domain. This is only supported on OpenBSD at present.
* sshd(8): Add "expiry-time" option for authorized_keys files
to allow for expiring keys.
* ssh(1): Add a BindInterface option to allow binding the (forwarded request 611002 from pcerny)
OBS-URL: https://build.opensuse.org/request/show/611071
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssh?expand=0&rev=118
- Upgrade to 7.7p1 (bsc#1094068)
- Upgrade to 7.7p1 (bsc#1094068)
Most important changes (more details below):
* Drop compatibility support for pre-2001 SSH implementations
* sshd(1) does not load DSA keys by default
Distilled upstream log:
---- Potentially-incompatible changes
* ssh(1)/sshd(8): Drop compatibility support for some very old
SSH implementations, including ssh.com <=2.* and OpenSSH <=
3.*. These versions were all released in or before 2001 and
predate the final SSH RFCs. The support in question isn't
necessary for RFC-compliant SSH implementations.
---- New Features
* experimental support for PQC XMSS keys (Extended Hash-Based
Signatures), not compiled in by default.
* sshd(8): Add a "rdomain" criteria for the sshd_config Match
keyword to allow conditional configuration that depends on
which routing domain a connection was received on (currently
supported on OpenBSD and Linux).
* sshd_config(5): Add an optional rdomain qualifier to the
ListenAddress directive to allow listening on different
routing domains. This is supported only on OpenBSD and Linux
at present.
* sshd_config(5): Add RDomain directive to allow the
authenticated session to be placed in an explicit routing
domain. This is only supported on OpenBSD at present.
* sshd(8): Add "expiry-time" option for authorized_keys files
to allow for expiring keys.
* ssh(1): Add a BindInterface option to allow binding the
OBS-URL: https://build.opensuse.org/request/show/611002
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=145
- Use TIRPC on suse_version >= 1500: sunrpc is deprecated and
should be replaced by TIRPC.
This has several effects:
* We get RPC support back... from build log in oS:F/standard:
[ 48s] checking rpc/types.h usability... no
[ 48s] checking rpc/types.h presence... no
[ 48s] checking for rpc/types.h... no
vs this branch:
[ 50s] checking rpc/types.h usability... yes
[ 50s] checking rpc/types.h presence... yes
[ 50s] checking for rpc/types.h... yes
AND as a side-effect, FALSE for ldapbody.c is now defined (not the
nicest of side-effects, but seems that ldap patch relies on RPC
headers to be included.
So all in all: this fixes the build failures for openSUSE Tumblewee (forwarded request 602971 from dimstar)
OBS-URL: https://build.opensuse.org/request/show/603107
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssh?expand=0&rev=117
- Use TIRPC on suse_version >= 1500: sunrpc is deprecated and
should be replaced by TIRPC.
This has several effects:
* We get RPC support back... from build log in oS:F/standard:
[ 48s] checking rpc/types.h usability... no
[ 48s] checking rpc/types.h presence... no
[ 48s] checking for rpc/types.h... no
vs this branch:
[ 50s] checking rpc/types.h usability... yes
[ 50s] checking rpc/types.h presence... yes
[ 50s] checking for rpc/types.h... yes
AND as a side-effect, FALSE for ldapbody.c is now defined (not the
nicest of side-effects, but seems that ldap patch relies on RPC
headers to be included.
So all in all: this fixes the build failures for openSUSE Tumblewee
OBS-URL: https://build.opensuse.org/request/show/602971
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=143
- upgrade to 7.6p1
see main package changelog for details
- Replace references to /var/adm/fillup-templates with new
%_fillupdir macro (boo#1069468)
- Update to vanilla 7.6p1
Most important changes (more details below):
* complete removal of the ancient SSHv1 protocol
* sshd(8) cannot run without privilege separation
* removal of suport for arcfourm blowfish and CAST ciphers
and RIPE-MD160 HMAC
* refuse RSA keys shorter than 1024 bits
Distilled upstream log:
- OpenSSH 7.3
---- Security
* sshd(8): Mitigate a potential denial-of-service attack
against the system's crypt(3) function via sshd(8). An
attacker could send very long passwords that would cause
excessive CPU use in crypt(3). sshd(8) now refuses to accept
password authentication requests of length greater than 1024
characters. Independently reported by Tomas Kuthan (Oracle),
Andres Rojas and Javier Nieto.
* sshd(8): Mitigate timing differences in password
authentication that could be used to discern valid from
invalid account names when long passwords were sent and
particular password hashing algorithms are in use on the
server. CVE-2016-6210, reported by EddieEzra.Harari at
verint.com
* ssh(1), sshd(8): Fix observable timing weakness in the CBC
OBS-URL: https://build.opensuse.org/request/show/551548
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=127
- upgrade to 7.6p1
see main package changelog for details
- Update to vanilla 7.6p1
Most important changes (more details below):
* complete removal of the ancient SSHv1 protocol
* sshd(8) cannot run without privilege separation
* removal of suport for arcfourm blowfish and CAST ciphers
and RIPE-MD160 HMAC
* refuse RSA keys shorter than 1024 bits
Distilled upstream log:
- OpenSSH 7.3
---- Security
* sshd(8): Mitigate a potential denial-of-service attack
against the system's crypt(3) function via sshd(8). An
attacker could send very long passwords that would cause
excessive CPU use in crypt(3). sshd(8) now refuses to accept
password authentication requests of length greater than 1024
characters. Independently reported by Tomas Kuthan (Oracle),
Andres Rojas and Javier Nieto.
* sshd(8): Mitigate timing differences in password
authentication that could be used to discern valid from
invalid account names when long passwords were sent and
particular password hashing algorithms are in use on the
server. CVE-2016-6210, reported by EddieEzra.Harari at
verint.com
* ssh(1), sshd(8): Fix observable timing weakness in the CBC
padding oracle countermeasures. Reported by Jean Paul
Degabriele, Kenny Paterson, Torben Hansen and Martin
Albrecht. Note that CBC ciphers are disabled by default and
OBS-URL: https://build.opensuse.org/request/show/539322
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=122
- remaining patches that were still missing
since the update to 7.2p2 (FATE#319675):
[openssh-7.2p2-disable_openssl_abi_check.patch]
- fix forwarding with IPv6 addresses in DISPLAY (bnc#847710)
[openssh-7.2p2-IPv6_X_forwarding.patch]
- ignore PAM environment when using login
(bsc#975865, CVE-2015-8325)
[openssh-7.2p2-ignore_PAM_with_UseLogin.patch]
- limit accepted password length (prevents possible DoS)
(bsc#992533, CVE-2016-6515)
[openssh-7.2p2-limit_password_length.patch]
- Prevent user enumeration through the timing of password
processing (bsc#989363, CVE-2016-6210)
[openssh-7.2p2-prevent_timing_user_enumeration.patch]
- Add auditing for PRNG re-seeding
[openssh-7.2p2-audit_seed_prng.patch] (forwarded request 433779 from pcerny)
OBS-URL: https://build.opensuse.org/request/show/433780
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssh?expand=0&rev=108
- remaining patches that were still missing
since the update to 7.2p2 (FATE#319675):
[openssh-7.2p2-disable_openssl_abi_check.patch]
- fix forwarding with IPv6 addresses in DISPLAY (bnc#847710)
[openssh-7.2p2-IPv6_X_forwarding.patch]
- ignore PAM environment when using login
(bsc#975865, CVE-2015-8325)
[openssh-7.2p2-ignore_PAM_with_UseLogin.patch]
- limit accepted password length (prevents possible DoS)
(bsc#992533, CVE-2016-6515)
[openssh-7.2p2-limit_password_length.patch]
- Prevent user enumeration through the timing of password
processing (bsc#989363, CVE-2016-6210)
[openssh-7.2p2-prevent_timing_user_enumeration.patch]
- Add auditing for PRNG re-seeding
[openssh-7.2p2-audit_seed_prng.patch]
OBS-URL: https://build.opensuse.org/request/show/433779
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=113
next round of patches
- allow X forwarding over IPv4 when IPv6 sockets is not available
[openssh-7.2p2-X_forward_with_disabled_ipv6.patch]
- do not write PID file when not daemonizing
[openssh-7.2p2-no_fork-no_pid_file.patch]
- use correct options when invoking login
[openssh-7.2p2-login_options.patch]
- helper application for retrieving users' public keys from
an LDAP server
[openssh-7.2p2-ldap.patch]
- allow forcing permissions over sftp
[openssh-7.2p2-sftp_force_permissions.patch]
- do not perform run-time checks for OpenSSL API/ABI change
[openssh-7.2p2-disable-openssl-abi-check.patch]
- suggest commands for cleaning known hosts file
[openssh-7.2p2-host_ident.patch]
- sftp home chroot patch
[openssh-7.2p2-sftp_homechroot.patch]
- ssh sessions auditing
[openssh-7.2p2-audit.patch]
- enable seccomp sandbox on additional architectures
[openssh-7.2p2-additional_seccomp_archs.patch]
OBS-URL: https://build.opensuse.org/request/show/432093
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=112
- fixed url
- upgrade to 7.2p2
- changing license to 2-clause BSD to match source
- added gpg signature
- enable support for SSHv1 protocol and discourage its usage
(bsc#983307)
- enable DSA by default for backward compatibility and discourage
its usage (bsc#983784)
[openssh-7.2p2-allow_DSS_by_default.patch]
- enable trusted X11 forwarding by default
[openssh-7.2p2-X11_trusted_forwarding.patch]
- set UID for lastlog properly
[openssh-7.2p2-lastlog.patch]
- enable use of PAM by default
[openssh-7.2p2-enable_PAM_by_default.patch]
- copy command line arguments properly
[openssh-7.2p2-saveargv-fix.patch]
- do not use pthreads in PAM code
[openssh-7.2p2-dont_use_pthreads_in_PAM.patch]
- fix paths in documentation
[openssh-7.2p2-eal3.patch]
- prevent race consitions triggered by SIGALRM
[openssh-7.2p2-blocksigalrm.patch]
- do send and accept locale environment variables by default
[openssh-7.2p2-send_locale.patch]
OBS-URL: https://build.opensuse.org/request/show/415094
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/openssh?expand=0&rev=106
- enable support for SSHv1 protocol and discourage its usage
(bsc#983307)
- enable DSA by default for backward compatibility and discourage
its usage (bsc#983784)
[openssh-7.2p2-allow_DSS_by_default.patch]
- upgrade to 7.2p2
upstream package without any SUSE patches
Distilled upstream log:
- OpenSSH 6.7
Potentially-incompatible changes:
* sshd(8): The default set of ciphers and MACs has been
altered to remove unsafe algorithms. In particular, CBC
ciphers and arcfour* are disabled by default.
The full set of algorithms remains available if configured
explicitly via the Ciphers and MACs sshd_config options.
* sshd(8): Support for tcpwrappers/libwrap has been removed.
* OpenSSH 6.5 and 6.6 have a bug that causes ~0.2% of
connections using the curve25519-sha256@libssh.org KEX
exchange method to fail when connecting with something that
implements the specification correctly. OpenSSH 6.7 disables
this KEX method when speaking to one of the affected
versions.
New Features:
* ssh(1), sshd(8): Add support for Unix domain socket
forwarding. A remote TCP port may be forwarded to a local
Unix domain socket and vice versa or both ends may be a Unix
domain socket.
* ssh(1), ssh-keygen(1): Add support for SSHFP DNS records for
ED25519 key types.
OBS-URL: https://build.opensuse.org/request/show/407066
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=107
