rpm/openssh
SHA256
1
0
Fork 0
forked from pool/openssh
Code Pull Requests Activity
b70ac3730b
openssh/openssh.spec
Marcus Meissner 3fed02069e Accepting request 922068 from home:hpjansson:branches:network 
- Version upgrade to 8.8p1
  * No changes for askpass, see main package changelog for
    details

- Version update to 8.8p1:
  = Security
  * sshd(8) from OpenSSH 6.2 through 8.7 failed to correctly initialise
    supplemental groups when executing an AuthorizedKeysCommand or
    AuthorizedPrincipalsCommand, where a AuthorizedKeysCommandUser or
    AuthorizedPrincipalsCommandUser directive has been set to run the
    command as a different user. Instead these commands would inherit
    the groups that sshd(8) was started with.
    Depending on system configuration, inherited groups may allow
    AuthorizedKeysCommand/AuthorizedPrincipalsCommand helper programs to
    gain unintended privilege.
    Neither AuthorizedKeysCommand nor AuthorizedPrincipalsCommand are
    enabled by default in sshd_config(5).
  = Potentially-incompatible changes
  * This release disables RSA signatures using the SHA-1 hash algorithm
    by default. This change has been made as the SHA-1 hash algorithm is
    cryptographically broken, and it is possible to create chosen-prefix
    hash collisions for <USD$50K.
    For most users, this change should be invisible and there is
    no need to replace ssh-rsa keys. OpenSSH has supported RFC8332
    RSA/SHA-256/512 signatures since release 7.2 and existing ssh-rsa keys
    will automatically use the stronger algorithm where possible.
    Incompatibility is more likely when connecting to older SSH
    implementations that have not been upgraded or have not closely tracked
    improvements in the SSH protocol. For these cases, it may be necessary
    to selectively re-enable RSA/SHA1 to allow connection and/or user
    authentication via the HostkeyAlgorithms and PubkeyAcceptedAlgorithms
    options.
  = New features
  * ssh(1): allow the ssh_config(5) CanonicalizePermittedCNAMEs
    directive to accept a "none" argument to specify the default
    behaviour.
  = Bugfixes
  * scp(1): when using the SFTP protocol, continue transferring files
    after a transfer error occurs, better matching original scp/rcp
    behaviour.
  * ssh(1): fixed a number of memory leaks in multiplexing,
  * ssh-keygen(1): avoid crash when using the -Y find-principals
    command.
  * A number of documentation and manual improvements, including
    bz#3340, PR139, PR215, PR241, PR257
- Additional changes from 8.7p1 release:
  = Potentially-incompatible changes
  * scp(1): this release changes the behaviour of remote to remote
    copies (e.g. "scp host-a:/path host-b:") to transfer through the
    local host by default. This was previously available via the -3
    flag. This mode avoids the need to expose credentials on the
    origin hop, avoids triplicate interpretation of filenames by the
    shell (by the local system, the copy origin and the destination)
    and, in conjunction with the SFTP support for scp(1) mentioned
    below, allows use of all authentication methods to the remote
    hosts (previously, only non-interactive methods could be used).
    A -R flag has been added to select the old behaviour.
  * ssh(1)/sshd(8): both the client and server are now using a
    stricter configuration file parser. The new parser uses more
    shell-like rules for quotes, space and escape characters. It is
    also more strict in rejecting configurations that include options
    lacking arguments. Previously some options (e.g. DenyUsers) could
    appear on a line with no subsequent arguments. This release will
    reject such configurations. The new parser will also reject
    configurations with unterminated quotes and multiple '='
    characters after the option name.
  * ssh(1): when using SSHFP DNS records for host key verification,
    ssh(1) will verify all matching records instead of just those
    with the specific signature type requested. This may cause host
    key verification problems if stale SSHFP records of a different
    or legacy signature type exist alongside other records for a
    particular host. bz#3322
  * ssh-keygen(1): when generating a FIDO key and specifying an
    explicit attestation challenge (using -Ochallenge), the challenge
    will now be hashed by the builtin security key middleware. This
    removes the (undocumented) requirement that challenges be exactly
    32 bytes in length and matches the expectations of libfido2.
  * sshd(8): environment="..." directives in authorized_keys files are
    now first-match-wins and limited to 1024 discrete environment
    variable names.
  = New features
  * scp(1): experimental support for transfers using the SFTP protocol
    as a replacement for the venerable SCP/RCP protocol that it has
    traditionally used. SFTP offers more predictable filename handling
    and does not require expansion of glob(3) patterns via the shell
    on the remote side.
  * sftp-server(8): add a protocol extension to support expansion of
    ~/ and ~user/ prefixed paths. This was added to support these
    paths when used by scp(1) while in SFTP mode.
  * ssh(1): add a ForkAfterAuthentication ssh_config(5) counterpart to
    the ssh(1) -f flag. GHPR231
  * ssh(1): add a StdinNull directive to ssh_config(5) that allows the
    config file to do the same thing as -n does on the ssh(1) command-
    line. GHPR231
  * ssh(1): add a SessionType directive to ssh_config, allowing the
    configuration file to offer equivalent control to the -N (no
    session) and -s (subsystem) command-line flags. GHPR231
  * ssh-keygen(1): allowed signers files used by ssh-keygen(1)
    signatures now support listing key validity intervals alongside
    they key, and ssh-keygen(1) can optionally check during signature
    verification whether a specified time falls inside this interval.
    This feature is intended for use by git to support signing and
    verifying objects using ssh keys.
  * ssh-keygen(8): support printing of the full public key in a sshsig
    signature via a -Oprint-pubkey flag.
  = Bugfixes
  * ssh(1)/sshd(8): start time-based re-keying exactly on schedule in
    the client and server mainloops. Previously the re-key timeout
    could expire but re-keying would not start until a packet was sent
    or received, causing a spin in select() if the connection was
    quiescent.
  * ssh-keygen(1): avoid Y2038 problem in printing certificate
    validity lifetimes. Dates past 2^31-1 seconds since epoch were
    displayed incorrectly on some platforms. bz#3329
  * scp(1): allow spaces to appear in usernames for local to remote
    and scp -3 remote to remote copies. bz#1164
  * ssh(1)/sshd(8): remove references to ChallengeResponseAuthentication
    in favour of KbdInteractiveAuthentication. The former is what was in
    SSHv1, the latter is what is in SSHv2 (RFC4256) and they were
    treated as somewhat but not entirely equivalent. We retain the old
    name as a deprecated alias so configuration files continue to work
    as well as a reference in the man page for people looking for it.
    bz#3303
  * ssh(1)/ssh-add(1)/ssh-keygen(1): fix decoding of X.509 subject name
    when extracting a key from a PKCS#11 certificate. bz#3327
  * ssh(1): restore blocking status on stdio fds before close. ssh(1)
    needs file descriptors in non-blocking mode to operate but it was
    not restoring the original state on exit. This could cause
    problems with fds shared with other programs via the shell,
    bz#3280 and GHPR246
  * ssh(1)/sshd(8): switch both client and server mainloops from
    select(3) to pselect(3). Avoids race conditions where a signal
    may arrive immediately before select(3) and not be processed until
    an event fires. bz#2158
  * ssh(1): sessions started with ControlPersist were incorrectly
    executing a shell when the -N (no shell) option was specified.
    bz#3290
  * ssh(1): check if IPQoS or TunnelDevice are already set before
    overriding. Prevents values in config files from overriding values
    supplied on the command line. bz#3319
  * ssh(1): fix debug message when finding a private key to match a
    certificate being attempted for user authentication. Previously it
    would print the certificate's path, whereas it was supposed to be
    showing the private key's path. GHPR247
  * sshd(8): match host certificates against host public keys, not
    private keys. Allows use of certificates with private keys held in
    a ssh-agent.  bz#3524
  * ssh(1): add a workaround for a bug in OpenSSH 7.4 sshd(8), which
    allows RSA/SHA2 signatures for public key authentication but fails
    to advertise this correctly via SSH2_MSG_EXT_INFO. This causes
    clients of these server to incorrectly match
    PubkeyAcceptedAlgorithmse and potentially refuse to offer valid
    keys. bz#3213
  * sftp(1)/scp(1): degrade gracefully if a sftp-server offers the
    limits@openssh.com extension but fails when the client tries to
    invoke it. bz#3318
  * ssh(1): allow ssh_config SetEnv to override $TERM, which is
    otherwise handled specially by the protocol. Useful in ~/.ssh/config
    to set TERM to something generic (e.g. "xterm" instead of
    "xterm-256color") for destinations that lack terminfo entries.
  * sftp-server(8): the limits@openssh.com extension was incorrectly
    marked as an operation that writes to the filesystem, which made it
    unavailable in sftp-server read-only mode. bz#3318
  * ssh(1): fix SEGV in UpdateHostkeys debug() message, triggered when
    the update removed more host keys than remain present.
  * Many manual page fixes.
- Additional changes from 8.6p1 release:
  = Security
  * sshd(8): OpenSSH 8.5 introduced the LogVerbose keyword. When this
    option was enabled with a set of patterns that activated logging
    in code that runs in the low-privilege sandboxed sshd process, the
    log messages were constructed in such a way that printf(3) format
    strings could effectively be specified the low-privilege code.
  = New features
  * sftp-server(8): add a new limits@openssh.com protocol extension
    that allows a client to discover various server limits, including
    maximum packet size and maximum read/write length.
  * sftp(1): use the new limits@openssh.com extension (when available)
    to select better transfer lengths in the client.
  * sshd(8): Add ModuliFile keyword to sshd_config to specify the
    location of the "moduli" file containing the groups for DH-GEX.
  * unit tests: Add a TEST_SSH_ELAPSED_TIMES environment variable to
    enable printing of the elapsed time in seconds of each test.
  = Bugfixes
  * ssh_config(5), sshd_config(5): sync CASignatureAlgorithms lists in
    manual pages with the current default. GHPR174
  * ssh(1): ensure that pkcs11_del_provider() is called before exit.
    GHPR234
  * ssh(1), sshd(8): fix problems in string->argv conversion. Multiple
    backslashes were not being dequoted correctly and quoted space in
    the middle of a string was being incorrectly split. GHPR223
  * ssh(1): return non-zero exit status when killed by signal; bz#3281
  * sftp-server(8): increase maximum SSH2_FXP_READ to match the maximum
    packet size. Also handle zero-length reads that are not explicitly
    banned by the spec.
- Additional changes from 8.5p1 release:
  = Security
  * ssh-agent(1): fixed a double-free memory corruption that was
    introduced in OpenSSH 8.2 . We treat all such memory faults as
    potentially exploitable. This bug could be reached by an attacker
    with access to the agent socket.
  = Potentially-incompatible changes
  * ssh(1), sshd(8): this release changes the first-preference signature
    algorithm from ECDSA to ED25519.
  * ssh(1), sshd(8): set the TOS/DSCP specified in the configuration
    for interactive use prior to TCP connect. The connection phase of
    the SSH session is time-sensitive and often explicitly interactive.
    The ultimate interactive/bulk TOS/DSCP will be set after
    authentication completes.
  * ssh(1), sshd(8): remove the pre-standardization cipher
    rijndael-cbc@lysator.liu.se. It is an alias for aes256-cbc before
    it was standardized in RFC4253 (2006), has been deprecated and
    disabled by default since OpenSSH 7.2 (2016) and was only briefly
    documented in ssh.1 in 2001.
  * ssh(1), sshd(8): update/replace the experimental post-quantum
    hybrid key exchange method based on Streamlined NTRU Prime coupled
    with X25519. The previous sntrup4591761x25519-sha512@tinyssh.org
    method is replaced with sntrup761x25519-sha512@openssh.com.
  * ssh(1): disable CheckHostIP by default. It provides insignificant
    benefits while making key rotation significantly more difficult,
    especially for hosts behind IP-based load-balancers.
  = New features
  * ssh(1): this release enables UpdateHostkeys by default subject to
    some conservative preconditions:
    - The key was matched in the UserKnownHostsFile (and not in the
      GlobalKnownHostsFile).
    - The same key does not exist under another name.
    - A certificate host key is not in use.
    - known_hosts contains no matching wildcard hostname pattern.
    - VerifyHostKeyDNS is not enabled.
    - The default UserKnownHostsFile is in use.
  * ssh(1), sshd(8): add a new LogVerbose configuration directive for
    that allows forcing maximum debug logging by file/function/line
    pattern-lists.
  * ssh(1): when prompting the user to accept a new hostkey, display
    any other host names/addresses already associated with the key.
  * ssh(1): allow UserKnownHostsFile=none to indicate that no
    known_hosts file should be used to identify host keys.
  * ssh(1): add a ssh_config KnownHostsCommand option that allows the
    client to obtain known_hosts data from a command in addition to
    the usual files.
  * ssh(1): add a ssh_config PermitRemoteOpen option that allows the
    client to restrict the destination when RemoteForward is used
    with SOCKS.
  * ssh(1): for FIDO keys, if a signature operation fails with a
    "incorrect PIN" reason and no PIN was initially requested from the
    user, then request a PIN and retry the operation. This supports
    some biometric devices that fall back to requiring PIN when reading
    of the biometric failed, and devices that require PINs for all
    hosted credentials.
  * sshd(8): implement client address-based rate-limiting via new
    sshd_config(5) PerSourceMaxStartups and PerSourceNetBlockSize
    directives that provide more fine-grained control on a per-origin
    address basis than the global MaxStartups limit.
  = Bugfixes
   * ssh(1): Prefix keyboard interactive prompts with "(user@host)" to
   make it easier to determine which connection they are associated
   with in cases like scp -3, ProxyJump, etc. bz#3224
  * sshd(8): fix sshd_config SetEnv directives located inside Match
    blocks. GHPR201
  * ssh(1): when requesting a FIDO token touch on stderr, inform the
    user once the touch has been recorded.
  * ssh(1): prevent integer overflow when ridiculously large
    ConnectTimeout values are specified, capping the effective value
    (for most platforms) at 24 days. bz#3229
  * ssh(1): consider the ECDSA key subtype when ordering host key
    algorithms in the client.
  * ssh(1), sshd(8): rename the PubkeyAcceptedKeyTypes keyword to
    PubkeyAcceptedAlgorithms. The previous name incorrectly suggested
    that it control allowed key algorithms, when this option actually
    specifies the signature algorithms that are accepted. The previous
    name remains available as an alias. bz#3253
  * ssh(1), sshd(8): similarly, rename HostbasedKeyTypes (ssh) and
    HostbasedAcceptedKeyTypes (sshd) to HostbasedAcceptedAlgorithms.
  * sftp-server(8): add missing lsetstat@openssh.com documentation
    and advertisement in the server's SSH2_FXP_VERSION hello packet.
  * ssh(1), sshd(8): more strictly enforce KEX state-machine by
    banning packet types once they are received. Fixes memleak caused
    by duplicate SSH2_MSG_KEX_DH_GEX_REQUEST (oss-fuzz #30078).
  * sftp(1): allow the full range of UIDs/GIDs for chown/chgrp on 32bit
    platforms instead of being limited by LONG_MAX. bz#3206
  * Minor man page fixes (capitalization, commas, etc.) bz#3223
  * sftp(1): when doing an sftp recursive upload or download of a
    read-only directory, ensure that the directory is created with
    write and execute permissions in the interim so that the transfer
    can actually complete, then set the directory permission as the
    final step. bz#3222
  * ssh-keygen(1): document the -Z, check the validity of its argument
    earlier and provide a better error message if it's not correct.
    bz#2879
  * ssh(1): ignore comments at the end of config lines in ssh_config,
    similar to what we already do for sshd_config. bz#2320
  * sshd_config(5): mention that DisableForwarding is valid in a
    sshd_config Match block. bz3239
  * sftp(1): fix incorrect sorting of "ls -ltr" under some
    circumstances. bz3248.
  * ssh(1), sshd(8): fix potential integer truncation of (unlikely)
    timeout values. bz#3250
  * ssh(1): make hostbased authentication send the signature algorithm
    in its SSH2_MSG_USERAUTH_REQUEST packets instead of the key type.
    This make HostbasedAcceptedAlgorithms do what it is supposed to -
    filter on signature algorithm and not key type.
- Rebased patches:
  * openssh-7.7p1-IPv6_X_forwarding.patch
  * openssh-7.7p1-X11_trusted_forwarding.patch
  * openssh-7.7p1-X_forward_with_disabled_ipv6.patch
  * openssh-7.7p1-cavstest-ctr.patch
  * openssh-7.7p1-cavstest-kdf.patch
  * openssh-7.7p1-disable_openssl_abi_check.patch
  * openssh-7.7p1-eal3.patch
  * openssh-7.7p1-enable_PAM_by_default.patch
  * openssh-7.7p1-fips.patch
  * openssh-7.7p1-fips_checks.patch
  * openssh-7.7p1-host_ident.patch
  * openssh-7.7p1-hostname_changes_when_forwarding_X.patch
  * openssh-7.7p1-ldap.patch
  * openssh-7.7p1-no_fork-no_pid_file.patch
  * openssh-7.7p1-pam_check_locks.patch
  * openssh-7.7p1-pts_names_formatting.patch
  * openssh-7.7p1-remove_xauth_cookies_on_exit.patch
  * openssh-7.7p1-seccomp_ipc_flock.patch
  * openssh-7.7p1-seccomp_stat.patch
  * openssh-7.7p1-send_locale.patch
  * openssh-7.7p1-sftp_force_permissions.patch
  * openssh-7.7p1-sftp_print_diagnostic_messages.patch
  * openssh-7.7p1-systemd-notify.patch
  * openssh-7.9p1-keygen-preserve-perms.patch
  * openssh-7.9p1-revert-new-qos-defaults.patch
  * openssh-8.0p1-gssapi-keyex.patch
  * openssh-8.1p1-audit.patch
  * openssh-8.1p1-seccomp-clock_gettime64.patch
  * openssh-8.1p1-seccomp-clock_nanosleep.patch
  * openssh-8.1p1-seccomp-clock_nanosleep_time64.patch
  * openssh-8.1p1-use-openssl-kdf.patch
  * openssh-8.4p1-vendordir.patch
  * openssh-fips-ensure-approved-moduli.patch
  * openssh-link-with-sk.patch
  * openssh-reenable-dh-group14-sha1-default.patch
  * openssh-whitelist-syscalls.patch
- Removed openssh-fix-ssh-copy-id.patch (fixed upstream).

OBS-URL: https://build.opensuse.org/request/show/922068
OBS-URL: https://build.opensuse.org/package/show/network/openssh?expand=0&rev=235
2021-10-07 08:06:58 +00:00

500 lines
18 KiB
RPMSpec
Raw Blame History

#
# spec file for package openssh
#
# Copyright (c) 2020 SUSE LLC
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via https://bugs.opensuse.org/
#
%define sandbox_seccomp 0
%ifnarch ppc
%define sandbox_seccomp 1
%endif
%if 0%{?suse_version} >= 1500
%bcond_without tirpc
%else
%bcond_with tirpc
%endif
%define _fwdir %{_sysconfdir}/sysconfig/SuSEfirewall2.d
%define _fwdefdir %{_fwdir}/services
%define _appdefdir %( grep "configdirspec=" $( which xmkmf ) | sed -r 's,^[^=]+=.*-I(.*)/config.*$,\\1/app-defaults,' )
%define CHECKSUM_SUFFIX .hmac
%define CHECKSUM_HMAC_KEY "HMAC_KEY:OpenSSH-FIPS@SLE"
#Compat macro for new _fillupdir macro introduced in Nov 2017
%if ! %{defined _fillupdir}
%define _fillupdir %{_localstatedir}/adm/fillup-templates
%endif
Name: openssh
Version: 8.8p1
Release: 0
Summary: Secure Shell Client and Server (Remote Login Program)
License: BSD-2-Clause AND MIT
Group: Productivity/Networking/SSH
URL: https://www.openssh.com/
Source0: https://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-%{version}.tar.gz
Source1: https://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-%{version}.tar.gz.asc
Source2: sshd.pamd
Source3: README.SUSE
Source4: README.kerberos
Source5: ssh.reg
Source6: ssh-askpass
Source7: sshd.fw
Source8: sysconfig.ssh
Source9: sshd-gen-keys-start
Source10: sshd.service
Source11: README.FIPS
Source12: cavs_driver-ssh.pl
Source13: https://ftp.openbsd.org/pub/OpenBSD/OpenSSH/RELEASE_KEY.asc#/openssh.keyring
Source14: sysusers-sshd.conf
Patch1: openssh-7.7p1-X11_trusted_forwarding.patch
Patch3: openssh-7.7p1-enable_PAM_by_default.patch
Patch4: openssh-7.7p1-eal3.patch
Patch6: openssh-7.7p1-send_locale.patch
Patch7: openssh-7.7p1-hostname_changes_when_forwarding_X.patch
Patch8: openssh-7.7p1-remove_xauth_cookies_on_exit.patch
Patch9: openssh-7.7p1-pts_names_formatting.patch
Patch10: openssh-7.7p1-pam_check_locks.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=2752
Patch14: openssh-7.7p1-seccomp_stat.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=2752
Patch15: openssh-7.7p1-seccomp_ipc_flock.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=2752
# Local FIPS patchset
Patch17: openssh-7.7p1-fips.patch
# Local cavs patchset
Patch18: openssh-7.7p1-cavstest-ctr.patch
# Local cavs patchset
Patch19: openssh-7.7p1-cavstest-kdf.patch
# Local FIPS patchset
Patch20: openssh-7.7p1-fips_checks.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=2641
Patch22: openssh-7.7p1-systemd-notify.patch
Patch23: openssh-8.0p1-gssapi-keyex.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=1402
Patch24: openssh-8.1p1-audit.patch
# Local patch to disable runtime abi SSL checks, quite pointless for us
Patch26: openssh-7.7p1-disable_openssl_abi_check.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=2641
Patch27: openssh-7.7p1-no_fork-no_pid_file.patch
Patch28: openssh-7.7p1-host_ident.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=1844
Patch29: openssh-7.7p1-sftp_force_permissions.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=2143
Patch30: openssh-7.7p1-X_forward_with_disabled_ipv6.patch
Patch31: openssh-7.7p1-ldap.patch
# https://bugzilla.mindrot.org/show_bug.cgi?id=2213
Patch32: openssh-7.7p1-IPv6_X_forwarding.patch
Patch33: openssh-7.7p1-sftp_print_diagnostic_messages.patch
Patch34: openssh-7.9p1-keygen-preserve-perms.patch
Patch35: openssh-7.9p1-revert-new-qos-defaults.patch
Patch36: openssh-8.1p1-seccomp-clock_nanosleep.patch
Patch37: openssh-8.1p1-seccomp-clock_nanosleep_time64.patch
Patch38: openssh-8.1p1-seccomp-clock_gettime64.patch
Patch39: openssh-8.1p1-use-openssl-kdf.patch
Patch40: openssh-8.1p1-ed25519-use-openssl-rng.patch
Patch41: openssh-fips-ensure-approved-moduli.patch
Patch42: openssh-link-with-sk.patch
Patch43: openssh-reenable-dh-group14-sha1-default.patch
Patch45: openssh-8.4p1-ssh_config_d.patch
Patch46: openssh-whitelist-syscalls.patch
Patch47: openssh-8.4p1-vendordir.patch
Patch48: openssh-8.4p1-pam_motd.patch
BuildRequires: audit-devel
BuildRequires: automake
BuildRequires: groff
BuildRequires: libedit-devel
BuildRequires: libselinux-devel
BuildRequires: openldap2-devel
BuildRequires: openssl-devel
BuildRequires: pam-devel
BuildRequires: pkgconfig
BuildRequires: zlib-devel
BuildRequires: pkgconfig(libfido2)
BuildRequires: pkgconfig(libsystemd)
BuildRequires: sysuser-shadow
BuildRequires: sysuser-tools
Requires: %{name}-clients = %{version}-%{release}
Requires: %{name}-server = %{version}-%{release}
%if %{with tirpc}
BuildRequires: libtirpc-devel
%endif
%if 0%{?suse_version} >= 1550
BuildRequires: pkgconfig(krb5)
%else
BuildRequires: krb5-mini-devel
%endif
Requires(pre): findutils
Requires(pre): grep
%description
SSH (Secure Shell) is a program for logging into and executing commands
on a remote machine. It replaces rsh (rlogin and rsh) and
provides secure encrypted communication between two untrusted
hosts over an insecure network.
xorg-x11 (X Window System) connections and arbitrary TCP/IP ports can
also be forwarded over the secure channel.
This is a dummy package that pulls in both the client and server
components.
%package common
Summary: SSH (Secure Shell) common files
Group: Productivity/Networking/SSH
Conflicts: nonfreessh
Conflicts: %{name}-fips < %{version}-%{release}
Conflicts: %{name}-fips > %{version}-%{release}
%description common
SSH (Secure Shell) is a program for logging into and executing commands
on a remote machine. It replaces rsh (rlogin and rsh) and
provides secure encrypted communication between two untrusted
hosts over an insecure network.
xorg-x11 (X Window System) connections and arbitrary TCP/IP ports can
also be forwarded over the secure channel.
This package contains common files for the Secure Shell server and
clients.
%package server
Summary: SSH (Secure Shell) server
Group: Productivity/Networking/SSH
Requires: %{name}-common = %{version}-%{release}
Recommends: audit
Requires(pre): findutils
Requires(pre): grep
Requires(post): %fillup_prereq
Requires(post): permissions
Provides: openssh:%{_sbindir}/sshd
%sysusers_requires
%description server
SSH (Secure Shell) is a program for logging into and executing commands
on a remote machine. It replaces rsh (rlogin and rsh) and
provides secure encrypted communication between two untrusted
hosts over an insecure network.
xorg-x11 (X Window System) connections and arbitrary TCP/IP ports can
also be forwarded over the secure channel.
This package contains the Secure Shell daemon, which allows clients to
securely connect to your server.
%package clients
Summary: SSH (Secure Shell) client applications
Group: Productivity/Networking/SSH
Requires: %{name}-common = %{version}-%{release}
Provides: openssh:%{_bindir}/ssh
%description clients
SSH (Secure Shell) is a program for logging into and executing commands
on a remote machine. It replaces rsh (rlogin and rsh) and
provides secure encrypted communication between two untrusted
hosts over an insecure network.
xorg-x11 (X Window System) connections and arbitrary TCP/IP ports can
also be forwarded over the secure channel.
This package contains clients for making secure connections to Secure
Shell servers.
%package helpers
Summary: OpenSSH AuthorizedKeysCommand helpers
Group: Productivity/Networking/SSH
Requires: %{name}-common = %{version}-%{release}
%description helpers
SSH (Secure Shell) is a program for logging into and executing commands
on a remote machine. It replaces rsh (rlogin and rsh) and
provides secure encrypted communication between two untrusted
hosts over an insecure network.
xorg-x11 (X Window System) connections and arbitrary TCP/IP ports can
also be forwarded over the secure channel.
This package contains helper applications for OpenSSH which retrieve
keys from various sources.
%package fips
Summary: OpenSSH FIPS crypto module HMACs
Group: Productivity/Networking/SSH
Requires: %{name}-common = %{version}-%{release}
Conflicts: %{name}-common < %{version}-%{release}
Conflicts: %{name}-common > %{version}-%{release}
Obsoletes: %{name}-hmac
%description fips
This package contains hashes that, together with the main openssh packages,
form the FIPS certifiable crypto module.
%package cavs
Summary: OpenSSH FIPS crypto module CAVS tests
Group: Productivity/Networking/SSH
Requires: %{name}-common = %{version}-%{release}
%description cavs
This package contains the FIPS-140 CAVS (Cryptographic Algorithm
Validation Program/Suite) related tests of OpenSSH.
%prep
%setup -q
cp %{SOURCE3} %{SOURCE4} %{SOURCE11} .
%autopatch -p1
# set libexec dir in the LDAP patch
sed -i.libexec 's,@LIBEXECDIR@,%{_libexecdir}/ssh,' \
$( grep -Rl @LIBEXECDIR@ \
$( grep "^+++" openssh-7.7p1-ldap.patch | sed -r 's@^.+/([^/\t ]+).*$@\1@' )
)
%build
autoreconf -fiv
%ifarch s390 s390x %{sparc}
PIEFLAGS="-fPIE"
%else
PIEFLAGS="-fpie"
%endif
CFLAGS="%{optflags} $PIEFLAGS -fstack-protector"
CXXFLAGS="%{optflags} $PIEFLAGS -fstack-protector"
LDFLAGS="-pie -Wl,--as-needed"
#CPPFLAGS="%%{optflags} -DUSE_INTERNAL_B64"
export LDFLAGS CFLAGS CXXFLAGS CPPFLAGS
%configure \
--sysconfdir=%{_sysconfdir}/ssh \
--libexecdir=%{_libexecdir}/ssh \
--with-selinux \
--with-pid-dir=/run \
--with-systemd \
--with-ssl-engine \
--with-pam \
--with-kerberos5=%{_prefix} \
--with-privsep-path=%{_localstatedir}/lib/empty \
%if %{sandbox_seccomp}
--with-sandbox=seccomp_filter \
%else
--with-sandbox=rlimit \
%endif
--disable-strip \
--with-audit=linux \
--with-ldap \
--with-xauth=%{_bindir}/xauth \
--with-libedit \
--with-security-key-builtin \
--target=%{_target_cpu}-suse-linux
%make_build
%sysusers_generate_pre %{SOURCE14} sshd sshd.conf
%install
%make_install
%if %{defined _distconfdir}
install -d -m 755 %{buildroot}%{_distconfdir}/pam.d
install -m 644 %{SOURCE2} %{buildroot}%{_distconfdir}/pam.d/sshd
%else
install -d -m 755 %{buildroot}%{_sysconfdir}/pam.d
install -m 644 %{SOURCE2} %{buildroot}%{_sysconfdir}/pam.d/sshd
%endif
install -d -m 755 %{buildroot}%{_localstatedir}/lib/sshd
install -d -m 755 %{buildroot}%{_sysconfdir}/ssh/ssh_config.d
install -d -m 755 %{buildroot}%{_sysconfdir}/ssh/sshd_config.d
install -d -m 755 %{buildroot}%{_sysconfdir}/slp.reg.d/
install -m 644 %{SOURCE5} %{buildroot}%{_sysconfdir}/slp.reg.d/
install -D -m 0644 %{SOURCE10} %{buildroot}%{_unitdir}/sshd.service
ln -s service %{buildroot}%{_sbindir}/rcsshd
install -d -m 755 %{buildroot}%{_fillupdir}
install -m 644 %{SOURCE8} %{buildroot}%{_fillupdir}
# install shell script to automate the process of adding your public key to a remote machine
install -m 755 contrib/ssh-copy-id %{buildroot}%{_bindir}
install -m 644 contrib/ssh-copy-id.1 %{buildroot}%{_mandir}/man1
sed -i -e s@%{_prefix}/libexec@%{_libexecdir}@g %{buildroot}%{_sysconfdir}/ssh/sshd_config
# Move /etc to /usr/etc/ssh
mkdir -p %{buildroot}%{_distconfdir}/ssh
mv %{buildroot}%{_sysconfdir}/ssh/moduli %{buildroot}%{_distconfdir}/ssh/
mv %{buildroot}%{_sysconfdir}/ssh/ssh_config %{buildroot}%{_distconfdir}/ssh/
mv %{buildroot}%{_sysconfdir}/ssh/sshd_config %{buildroot}%{_distconfdir}/ssh/
%if 0%{?suse_version} < 1550
# install firewall definitions
mkdir -p %{buildroot}%{_fwdefdir}
install -m 644 %{SOURCE7} %{buildroot}%{_fwdefdir}/sshd
%endif
# askpass wrapper
sed -e "s,@LIBEXECDIR@,%{_libexecdir},g" < %{SOURCE6} > %{buildroot}%{_libexecdir}/ssh/ssh-askpass
sed -e "s,@LIBEXECDIR@,%{_libexecdir},g" < %{SOURCE12} > %{buildroot}%{_libexecdir}/ssh/cavs_driver-ssh.pl
rm -f %{buildroot}%{_datadir}/Ssh.bin
# sshd keys generator wrapper
install -D -m 0755 %{SOURCE9} %{buildroot}%{_sbindir}/sshd-gen-keys-start
# Install sysusers.d config for sshd user
mkdir -p %{buildroot}%{_sysusersdir}
install -m 644 %{SOURCE14} %{buildroot}%{_sysusersdir}/sshd.conf
# the hmac hashes - taken from openssl
#
# re-define the __os_install_post macro: the macro strips
# the binaries and thereby invalidates any hashes created earlier.
#
# this shows up earlier because otherwise the %%expand of
# the macro is too late.
%{expand:%%global __os_install_post {%__os_install_post
for b in \
%{_bindir}/ssh \
%{_sbindir}/sshd \
%{_libexecdir}/ssh/sftp-server \
; do
openssl dgst -sha256 -binary -hmac %{CHECKSUM_HMAC_KEY} < %{buildroot}$b > %{buildroot}$b%{CHECKSUM_SUFFIX}
done
}}
%pre server -f sshd.pre
%if %{defined _distconfdir}
# Prepare for migration to /usr/etc.
test -f /etc/pam.d/sshd.rpmsave && mv -v /etc/pam.d/sshd.rpmsave /etc/pam.d/sshd.rpmsave.old ||:
test -f /etc/ssh/sshd_config.rpmsave && mv -v /etc/ssh/sshd_config.rpmsave /etc/ssh/sshd_config.rpmsave.old ||:
%endif
%service_add_pre sshd.service
%post server
%{fillup_only -n ssh}
%service_add_post sshd.service
%preun server
%service_del_preun sshd.service
%postun server
# The openssh-fips trigger script for openssh will normally restart sshd once
# it gets installed, so only restart the service here if openssh-fips is not
# present.
if rpm -q openssh-fips >/dev/null 2>/dev/null; then
%service_del_postun_without_restart sshd.service
else
%service_del_postun sshd.service
fi
%if %{defined _distconfdir}
%posttrans server
# Migration to /usr/etc.
test -f /etc/pam.d/sshd.rpmsave && mv -v /etc/pam.d/sshd.rpmsave /etc/pam.d/sshd ||:
test -f /etc/ssh/sshd_config.rpmsave && mv -v /etc/ssh/sshd_config.rpmsave /etc/ssh/sshd_config ||:
%endif
%if %{defined _distconfdir}
%pre clients
# Prepare for migration to /usr/etc.
test -f /etc/ssh/ssh_config.rpmsave && mv -v /etc/ssh/ssh_config.rpmsave /etc/ssh/ssh_config.rpmsave.old ||:
%endif
%if %{defined _distconfdir}
%posttrans clients
# Migration to /usr/etc.
test -f /etc/ssh/ssh_config.rpmsave && mv -v /etc/ssh/ssh_config.rpmsave /etc/ssh/ssh_config ||:
%endif
%triggerin -n openssh-fips -- %{name} = %{version}-%{release}
%restart_on_update sshd
%files
# openssh is an empty package that depends on -clients and -server,
# resulting in a clean upgrade path from prior to the split even when
# recommends are disabled.
%files common
%license LICENCE
%doc README.SUSE README.kerberos README.FIPS ChangeLog OVERVIEW README TODO CREDITS
%attr(0755,root,root) %dir %{_sysconfdir}/ssh
%attr(0755,root,root) %dir %{_distconfdir}/ssh
%attr(0600,root,root) %{_distconfdir}/ssh/moduli
%attr(0444,root,root) %{_mandir}/man1/ssh-keygen.1*
%attr(0444,root,root) %{_mandir}/man5/moduli.5*
%attr(0755,root,root) %{_bindir}/ssh-keygen*
%files server
%attr(0755,root,root) %{_sbindir}/sshd
%attr(0755,root,root) %{_sbindir}/rcsshd
%attr(0755,root,root) %{_sbindir}/sshd-gen-keys-start
%dir %attr(0755,root,root) %{_localstatedir}/lib/sshd
%dir %attr(0755,root,root) %{_sysconfdir}/ssh/sshd_config.d
%attr(0755,root,root) %dir %{_distconfdir}/ssh
%attr(0640,root,root) %{_distconfdir}/ssh/sshd_config
%if %{defined _distconfdir}
%attr(0644,root,root) %{_distconfdir}/pam.d/sshd
%else
%attr(0644,root,root) %config(noreplace) %{_sysconfdir}/pam.d/sshd
%endif
%attr(0644,root,root) %{_unitdir}/sshd.service
%attr(0644,root,root) %{_sysusersdir}/sshd.conf
%attr(0444,root,root) %{_mandir}/man5/sshd_config*
%attr(0444,root,root) %{_mandir}/man8/sftp-server.8*
%attr(0444,root,root) %{_mandir}/man8/sshd.8*
%attr(0755,root,root) %{_libexecdir}/ssh/sftp-server
%dir %{_sysconfdir}/slp.reg.d
%config %{_sysconfdir}/slp.reg.d/ssh.reg
%{_fillupdir}/sysconfig.ssh
%if 0%{?suse_version} < 1550
%dir %{_fwdir}
%dir %{_fwdefdir}
%config %{_fwdefdir}/sshd
%endif
%files clients
%dir %attr(0755,root,root) %{_sysconfdir}/ssh/ssh_config.d
%attr(0644,root,root) %{_distconfdir}/ssh/ssh_config
%attr(0755,root,root) %{_bindir}/ssh
%attr(0755,root,root) %{_bindir}/scp*
%attr(0755,root,root) %{_bindir}/sftp*
%attr(0755,root,root) %{_bindir}/ssh-add*
%attr(0755,root,root) %{_bindir}/ssh-agent*
%attr(0755,root,root) %{_bindir}/ssh-copy-id*
%attr(0755,root,root) %{_bindir}/ssh-keyscan*
%attr(0755,root,root) %dir %{_libexecdir}/ssh
%attr(0755,root,root) %{_libexecdir}/ssh/ssh-askpass*
%attr(0755,root,root) %{_libexecdir}/ssh/ssh-keysign*
%attr(0755,root,root) %{_libexecdir}/ssh/ssh-pkcs11-helper*
%attr(0755,root,root) %{_libexecdir}/ssh/ssh-sk-helper*
%attr(0444,root,root) %{_mandir}/man1/scp.1*
%attr(0444,root,root) %{_mandir}/man1/sftp.1*
%attr(0444,root,root) %{_mandir}/man1/ssh-add.1*
%attr(0444,root,root) %{_mandir}/man1/ssh-agent.1*
%attr(0444,root,root) %{_mandir}/man1/ssh-keyscan.1*
%attr(0444,root,root) %{_mandir}/man1/ssh.1*
%attr(0444,root,root) %{_mandir}/man1/ssh-copy-id.1*
%attr(0444,root,root) %{_mandir}/man5/ssh_config.5*
%attr(0444,root,root) %{_mandir}/man8/ssh-pkcs11-helper.8*
%attr(0444,root,root) %{_mandir}/man8/ssh-sk-helper.8*
%attr(0444,root,root) %{_mandir}/man8/ssh-keysign.8*
%files helpers
%attr(0755,root,root) %dir %{_sysconfdir}/ssh
%verify(not mode) %attr(0644,root,root) %config(noreplace) %{_sysconfdir}/ssh/ldap.conf
%attr(0755,root,root) %dir %{_libexecdir}/ssh
%attr(0755,root,root) %{_libexecdir}/ssh/ssh-ldap*
%attr(0444,root,root) %{_mandir}/man5/ssh-ldap*
%attr(0444,root,root) %{_mandir}/man8/ssh-ldap*
%doc HOWTO.ldap-keys openssh-lpk-openldap.schema openssh-lpk-sun.schema
%files fips
%attr(0444,root,root) %{_bindir}/ssh%{CHECKSUM_SUFFIX}
%attr(0444,root,root) %{_sbindir}/sshd%{CHECKSUM_SUFFIX}
%attr(0444,root,root) %{_libexecdir}/ssh/sftp-server%{CHECKSUM_SUFFIX}
%files cavs
%attr(0755,root,root) %{_libexecdir}/ssh/cavs*
%changelog
View Git Blame Copy Permalink