- Updated openssl.keyring with key A21FAB74B0088AA361152586B8EF1A6BA9DA2D5C
- Update to 1.1.1s:
* Fixed a regression introduced in 1.1.1r version not refreshing the
certificate data to be signed before signing the certificate.
- Update to 1.1.1r:
* Fixed the linux-mips64 Configure target which was missing the
SIXTY_FOUR_BIT bn_ops flag. This was causing heap corruption on that
platform.
* Fixed a strict aliasing problem in bn_nist. Clang-14 optimisation was
causing incorrect results in some cases as a result.
* Fixed SSL_pending() and SSL_has_pending() with DTLS which were failing to
report correct results in some cases
* Fixed a regression introduced in 1.1.1o for re-signing certificates with
different key sizes
* Added the loongarch64 target
* Fixed a DRBG seed propagation thread safety issue
* Fixed a memory leak in tls13_generate_secret
* Fixed reported performance degradation on aarch64. Restored the
implementation prior to commit 2621751 ("aes/asm/aesv8-armx.pl: avoid
32-bit lane assignment in CTR mode") for 64bit targets only, since it is
reportedly 2-17% slower and the silicon errata only affects 32bit targets.
The new algorithm is still used for 32 bit targets.
* Added a missing header for memcmp that caused compilation failure on some
platforms
OBS-URL: https://build.opensuse.org/request/show/1032887
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=121
- Update to 1.1.1n: [bsc#1196877, CVE-2022-0778]
* Security fix [CVE-2022-0778]: Infinite loop for non-prime moduli
in BN_mod_sqrt() reachable when parsing certificates.
* Add ciphersuites based on DHE_PSK (RFC 4279) and ECDHE_PSK
(RFC 5489) to the list of ciphersuites providing Perfect Forward
Secrecy as required by SECLEVEL >= 3.
* Rebase openssl-1.1.1-fips.patch openssl-1.1.1-evp-kdf.patch
OBS-URL: https://build.opensuse.org/request/show/961990
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=109
- Added openssl-1_1-use-include-directive.patch so that the default
/etc/ssl/openssl.cnf file will include any configuration files that
other packages might place into /etc/ssl/engines.d/ and
/etc/ssl/engdef.d/ This is a fix for bsc#1004463 where scripting was
being used to modify the openssl.cnf file. The scripting would fail
if either the default openssl.cnf file, or the sample openssl-ibmca
configuration file would be changed by upstream.
- Updated spec file to create the two new necessary directores for
the above patch.
OBS-URL: https://build.opensuse.org/request/show/936137
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=100
- Add support for livepatches (jsc#SLE-20049).
- Generate ipa-clones tarball artifact when livepatching is enabled.
Userspace Livepatching allows your application to be updated without restarting. For a library to be livepatchable, it has to be compiled with special flags (-fpatchable-functions-entry=X,Y).
To aid the development of livepatches, ipa-clones are also generated in the build process and packed into a livepatch tarball. This tarball is meant to be used by developers during their workflow: these files contains log of changes that gcc did in the compiled code that may change code layout, which must be accounted when developing a livepatch. For instance, livepatching a function which is inlined requires livepatching every function that calls it. Tools that use such files already exists in kernel-livepatching and we aim porting them to userspace livepatching as well.
OBS-URL: https://build.opensuse.org/request/show/930969
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=99
- Update to 1.1.1j
* Fixed the X509_issuer_and_serial_hash() function. It attempts
to create a unique hash value based on the issuer and serial
number data contained within an X509 certificate. However it
was failing to correctly handle any errors that may occur
while parsing the issuer field [bsc#1182331, CVE-2021-23841]
* Fixed the RSA_padding_check_SSLv23() function and the
RSA_SSLV23_PADDING padding mode to correctly check for
rollback attacks.
* Fixed the EVP_CipherUpdate, EVP_EncryptUpdate and
EVP_DecryptUpdate functions. Previously they could overflow the
output length argument in some cases where the input length is
close to the maximum permissable length for an integer on the
platform. In such cases the return value from the function call
would be 1 (indicating success), but the output length value
would be negative. This could cause applications to behave
incorrectly or crash. [bsc#1182333, CVE-2021-23840]
* Fixed SRP_Calc_client_key so that it runs in constant time.
The previous implementation called BN_mod_exp without setting
BN_FLG_CONSTTIME. This could be exploited in a side channel
attack to recover the password. Since the attack is local host
only this is outside of the current OpenSSL threat model and
therefore no CVE is assigned.
- Rebase patches:
* openssl-1.1.1-fips.patch
* openssl-1.1.0-issuer-hash.patch
* openssl-1.1.1-evp-kdf.patch
- Add version guards for the crypto-policies
OBS-URL: https://build.opensuse.org/request/show/873674
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=85
- Update to 1.1.1g
* Fixed segmentation fault in SSL_check_chain (CVE-2020-1967, bsc#1169407)
Server or client applications that call the SSL_check_chain() function
during or after a TLS 1.3 handshake may crash due to a NULL pointer
dereference as a result of incorrect handling of the
"signature_algorithms_cert" TLS extension. The crash occurs if an invalid
or unrecognised signature algorithm is received from the peer. This could
be exploited by a malicious peer in a Denial of Service attack.
* Added AES consttime code for no-asm configurations
an optional constant time support for AES was added
when building openssl for no-asm.
- refresh patches:
* openssl-1.1.1-fips.patch
* openssl-1.1.1-fips-crng-test.patch
OBS-URL: https://build.opensuse.org/request/show/796077
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=68
- Update to 1.1.1e
* Properly detect EOF while reading in libssl. Previously if we hit an EOF
while reading in libssl then we would report an error back to the
application (SSL_ERROR_SYSCALL) but errno would be 0. We now add
an error to the stack (which means we instead return SSL_ERROR_SSL) and
therefore give a hint as to what went wrong.
* Check that ed25519 and ed448 are allowed by the security level. Previously
signature algorithms not using an MD were not being checked that they were
allowed by the security level.
* Fixed SSL_get_servername() behaviour. The behaviour of SSL_get_servername()
was not quite right. The behaviour was not consistent between resumption
and normal handshakes, and also not quite consistent with historical
behaviour. The behaviour in various scenarios has been clarified and
it has been updated to make it match historical behaviour as closely as
possible.
* Corrected the documentation of the return values from the EVP_DigestSign*
set of functions. The documentation mentioned negative values for some
errors, but this was never the case, so the mention of negative values
was removed.
* Added a new method to gather entropy on VMS, based on SYS$GET_ENTROPY.
The presence of this system service is determined at run-time.
* Added newline escaping functionality to a filename when using openssl dgst.
This output format is to replicate the output format found in the '*sum'
checksum programs. This aims to preserve backward compatibility.
* Print all values for a PKCS#12 attribute with 'openssl pkcs12', not just
the first value.
- Update bunch of patches as the internal crypto headers got reorganized
- drop openssl-1_1-CVE-2019-1551.patch (upstream)
- openssl dgst: default to SHA256 only when called without a digest,
OBS-URL: https://build.opensuse.org/request/show/786956
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=65
- Update to 1.1.1d (bsc#1133925, jsc#SLE-6430)
* Fixed a fork protection issue. OpenSSL 1.1.1 introduced a rewritten random
number generator (RNG). This was intended to include protection in the
event of a fork() system call in order to ensure that the parent and child
processes did not share the same RNG state. However this protection was not
being used in the default case.
(bsc#1150247, CVE-2019-1549)
* Compute ECC cofactors if not provided during EC_GROUP construction. Before
this change, EC_GROUP_set_generator would accept order and/or cofactor as
NULL. After this change, only the cofactor parameter can be NULL.
(bsc#1150003, CVE-2019-1547)
* Fixed a padding oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey.
(bsc#1150250, CVE-2019-1563)
* For built-in EC curves, ensure an EC_GROUP built from the curve name is
used even when parsing explicit parameters, when loading a serialized key
or calling EC_GROUP_new_from_ecpkparameters()/EC_GROUP_new_from_ecparameters().
* Early start up entropy quality from the DEVRANDOM seed source has been
improved for older Linux systems.
* Changed DH_check to accept parameters with order q and 2q subgroups.
With order 2q subgroups the bit 0 of the private key is not secret
but DH_generate_key works around that by clearing bit 0 of the
private key for those. This avoids leaking bit 0 of the private key.
* Significantly reduce secure memory usage by the randomness pools.
* Revert the DEVRANDOM_WAIT feature for Linux systems
- drop 0001-build_SYS_str_reasons-Fix-a-crash-caused-by-overlong.patch (upstream)
- refresh patches
* openssl-1.1.0-no-html.patch
* openssl-jsc-SLE-8789-backport_KDF.patch
OBS-URL: https://build.opensuse.org/request/show/730187
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=43
- Update openssl-fix_underflow_in_errstr_handling.patch to use
upstream approved code
* https://github.com/openssl/openssl/pull/8966
- update openssl.keyring to include Richard Levitte's key
- Update to 1.1.1c
* Prevent over long nonces in ChaCha20-Poly1305 (CVE-2019-1543)
ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input
for every encryption operation. RFC 7539 specifies that the nonce value
(IV) should be 96 bits (12 bytes). OpenSSL allows a variable nonce length
and front pads the nonce with 0 bytes if it is less than 12
bytes. However it also incorrectly allows a nonce to be set of up to 16
bytes. In this case only the last 12 bytes are significant and any
additional leading bytes are ignored.
* Add build tests for C++. These are generated files that only do one
thing, to include one public OpenSSL head file each. This tests that
the public header files can be usefully included in a C++ application.
* Enable SHA3 pre-hashing for ECDSA and DSA.
* Change the default RSA, DSA and DH size to 2048 bit instead of 1024.
This changes the size when using the genpkey app when no size is given. It
fixes an omission in earlier changes that changed all RSA, DSA and DH
generation apps to use 2048 bits by default.
* Reorganize the manual pages to consistently have RETURN VALUES,
EXAMPLES, SEE ALSO and HISTORY come in that order, and adjust
util/fix-doc-nits accordingly.
* Add the missing accessor EVP_PKEY_get0_engine()
* Have apps like 's_client' and 's_server' output the signature scheme
along with other cipher suite parameters when debugging.
* Make OPENSSL_config() error agnostic again.
* Do the error handling in RSA decryption constant time.
OBS-URL: https://build.opensuse.org/request/show/706506
OBS-URL: https://build.opensuse.org/package/show/security:tls/openssl-1_1?expand=0&rev=37
