Accepting request 368475 from home:k_mroz:branches:network

- Add additional install requirements for python-openvswitch-test
  package.

- Add support for building both 2.4.0 and 2.5.0 from the same spec
  file. Needed to fix SLE11 builds as OVS-2.5.0 no longer supports
  python < 2.7. SLE11 SP3 and SP4 use python 2.6.
- Added: openvswitch-2.4.0.tar.gz

- New upstream version 2.5.0 (LTS)
  - Dropped support for Python older than version 2.7.  As a consequence,
    using Open vSwitch 2.5 or later on XenServer 6.5 or earlier (which
    have Python 2.4) requires first installing Python 2.7.
  - OpenFlow:
    * Group chaining (where one OpenFlow group triggers another) is
      now supported.
    * OpenFlow 1.4+ "importance" is now considered for flow eviction.
    * OpenFlow 1.4+ OFPTC_EVICTION is now implemented.
    * OpenFlow 1.4+ OFPTC_VACANCY_EVENTS is now implemented.
    * OpenFlow 1.4+ OFPMP_TABLE_DESC is now implemented.
    * Allow modifying the ICMPv4/ICMPv6 type and code fields.
    * OpenFlow 1.4+ OFPT_SET_ASYNC_CONFIG and OFPT_GET_ASYNC_CONFIG are
      now implemented.
  - ovs-ofctl:
    * New "out_group" keyword for OpenFlow 1.1+ matching on output group.
  - Tunnels:
    * Geneve tunnels can now match and set options and the OAM bit.
    * The nonstandard GRE64 tunnel extension has been dropped.
  - Support Multicast Listener Discovery (MLDv1 and MLDv2).
  - Add 'symmetric_l3l4' and 'symmetric_l3l4+udp' hash functions.
  - sFlow agent now reports tunnel and MPLS structures.

OBS-URL: https://build.opensuse.org/request/show/368475
OBS-URL: https://build.opensuse.org/package/show/network/openvswitch?expand=0&rev=79

openvswitch-2.5.0.tar.gz

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:34da54fbad503205b1a66b48ca4312679e1ce5b04763a9fb86050b2b25d66f21
+size 4603077

openvswitch-testcontroller.init

@@ -0,0 +1,278 @@
+#!/bin/sh
+#
+# Copyright (c) 2011, 2014 Nicira, Inc.
+# Copyright (c) 2007, 2009 Javier Fernandez-Sanguino <jfs@debian.org>
+#
+# This is free software; you may redistribute it and/or modify
+# it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2,
+# or (at your option) any later version.
+#
+# This is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License with
+# the Debian operating system, in /usr/share/common-licenses/GPL;  if
+# not, write to the Free Software Foundation, Inc., 59 Temple Place,
+# Suite 330, Boston, MA 02111-1307 USA
+#
+### BEGIN INIT INFO
+# Provides:          openvswitch-testcontroller
+# Required-Start:    $network $local_fs $remote_fs
+# Required-Stop:     $remote_fs
+# Should-Start:      $named
+# Should-Stop:       $null
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Simple OpenFlow controller for testing
+# Description:       This controller enables OpenFlow switches that connect to
+#                    it to act as MAC-learning Ethernet switches.
+### END INIT INFO
+
+PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
+
+DAEMON=/usr/bin/ovs-testcontroller # Introduce the server's location here
+NAME=ovs-testcontroller         # Introduce the short server's name here
+DESC=ovs-testcontroller         # Introduce a short description here
+LOGDIR=/var/log/openvswitch	# Log directory to use
+
+PIDFILE=/var/run/openvswitch/$NAME.pid
+
+test -x $DAEMON || exit 0
+
+. /lib/lsb/init-functions
+
+# Default options, these can be overriden by the information
+# at /etc/default/openvswitch-testcontroller
+DAEMON_OPTS=""          # Additional options given to the server
+
+DODTIME=10              # Time to wait for the server to die, in seconds
+                        # If this value is set too low you might not
+                        # let some servers to die gracefully and
+                        # 'restart' will not work
+
+LOGFILE=$LOGDIR/$NAME.log  # Server logfile
+#DAEMONUSER=            # User to run the daemons as. If this value
+                        # is set start-stop-daemon will chuid the server
+
+# Include defaults if available
+default=/etc/default/openvswitch-testcontroller
+if [ -f $default ] ; then
+    . $default
+fi
+
+# Check that the user exists (if we set a user)
+# Does the user exist?
+if [ -n "$DAEMONUSER" ] ; then
+    if getent passwd | grep -q "^$DAEMONUSER:"; then
+        # Obtain the uid and gid
+        DAEMONUID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $3}'`
+        DAEMONGID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $4}'`
+    else
+        log_failure_msg "The user $DAEMONUSER, required to run $NAME does not exist."
+        exit 1
+    fi
+fi
+
+
+set -e
+
+running_pid() {
+# Check if a given process pid's cmdline matches a given name
+    pid=$1
+    name=$2
+    [ -z "$pid" ] && return 1
+    [ ! -d /proc/$pid ] &&  return 1
+    cmd=`cat /proc/$pid/cmdline | tr "\000" "\n"|head -n 1 |cut -d : -f 1`
+    # Is this the expected server
+    [ "$cmd" != "$name" ] &&  return 1
+    return 0
+}
+
+running() {
+# Check if the process is running looking at /proc
+# (works for all users)
+
+    # No pidfile, probably no daemon present
+    [ ! -f "$PIDFILE" ] && return 1
+    pid=`cat $PIDFILE`
+    running_pid $pid $DAEMON || return 1
+    return 0
+}
+
+start_server() {
+    if [ -z "$LISTEN" ]; then
+        echo "$default: No connection methods configured, controller disabled" >&2
+        exit 0
+    fi
+
+    if [ ! -d /var/run/openvswitch ]; then
+        install -d -m 755 -o root -g root /var/run/openvswitch
+    fi
+
+    SSL_OPTS=
+    case $LISTEN in
+        *ssl*)
+            : ${PRIVKEY:=/etc/openvswitch-testcontroller/privkey.pem}
+            : ${CERT:=/etc/openvswitch-testcontroller/cert.pem}
+            : ${CACERT:=/etc/openvswitch-testcontroller/cacert.pem}
+            if test ! -e "$PRIVKEY" || test ! -e "$CERT" ||
+                test ! -e "$CACERT"; then
+                if test ! -e "$PRIVKEY"; then
+                    echo "$PRIVKEY: private key missing" >&2
+                fi
+                if test ! -e "$CERT"; then
+                    echo "$CERT: certificate for private key missing" >&2
+                fi
+                if test ! -e "$CACERT"; then
+                    echo "$CACERT: CA certificate missing" >&2
+                fi
+                exit 1
+            fi
+            SSL_OPTS="--private-key=$PRIVKEY --certificate=$CERT --ca-cert=$CACERT"
+            ;;
+    esac
+
+# Start the process using the wrapper
+        if [ -z "$DAEMONUSER" ] ; then
+            start-stop-daemon --start --pidfile $PIDFILE \
+                        --exec $DAEMON -- --detach --pidfile=$PIDFILE \
+                        $LISTEN $DAEMON_OPTS $SSL_OPTS
+            errcode=$?
+        else
+# if we are using a daemonuser then change the user id
+            start-stop-daemon --start --quiet --pidfile $PIDFILE \
+                        --chuid $DAEMONUSER --exec $DAEMON -- \
+                        --detach --pidfile=$PIDFILE $LISTEN $DAEMON_OPTS \
+                        $SSL_OPTS
+            errcode=$?
+        fi
+        return $errcode
+}
+
+stop_server() {
+# Stop the process using the wrapper
+        if [ -z "$DAEMONUSER" ] ; then
+            start-stop-daemon --stop --quiet --pidfile $PIDFILE \
+                        --exec $DAEMON
+            errcode=$?
+        else
+# if we are using a daemonuser then look for process that match
+            start-stop-daemon --stop --quiet --pidfile $PIDFILE \
+                        --user $DAEMONUSER --exec $DAEMON
+            errcode=$?
+        fi
+
+        return $errcode
+}
+
+reload_server() {
+    [ ! -f "$PIDFILE" ] && return 1
+    pid=`cat $PIDFILE` # This is the daemon's pid
+    # Send a SIGHUP
+    kill -1 $pid
+    return $?
+}
+
+force_stop() {
+# Force the process to die killing it manually
+    [ ! -e "$PIDFILE" ] && return
+    if running ; then
+        kill -15 $pid
+        # Is it really dead?
+        sleep "$DODTIME"
+        if running ; then
+            kill -9 $pid
+            sleep "$DODTIME"
+            if running ; then
+                echo "Cannot kill $NAME (pid=$pid)!"
+                exit 1
+            fi
+        fi
+    fi
+    rm -f $PIDFILE
+}
+
+
+case "$1" in
+  start)
+        log_daemon_msg "Starting $DESC " "$NAME"
+        # Check if it's running first
+        if running ;  then
+            log_progress_msg "apparently already running"
+            log_end_msg 0
+            exit 0
+        fi
+        if start_server && running ;  then
+            # It's ok, the server started and is running
+            log_end_msg 0
+        else
+            # Either we could not start it or it is not running
+            # after we did
+            # NOTE: Some servers might die some time after they start,
+            # this code does not try to detect this and might give
+            # a false positive (use 'status' for that)
+            log_end_msg 1
+        fi
+        ;;
+  stop)
+        log_daemon_msg "Stopping $DESC" "$NAME"
+        if running ; then
+            # Only stop the server if we see it running
+            stop_server
+            log_end_msg $?
+        else
+            # If it's not running don't do anything
+            log_progress_msg "apparently not running"
+            log_end_msg 0
+            exit 0
+        fi
+        ;;
+  force-stop)
+        # First try to stop gracefully the program
+        $0 stop
+        if running; then
+            # If it's still running try to kill it more forcefully
+            log_daemon_msg "Stopping (force) $DESC" "$NAME"
+            force_stop
+            log_end_msg $?
+        fi
+        ;;
+  restart|force-reload)
+        log_daemon_msg "Restarting $DESC" "$NAME"
+        if running; then
+            stop_server
+            # Wait some sensible amount, some server need this.
+            [ -n "$DODTIME" ] && sleep $DODTIME
+        fi
+        start_server
+        running
+        log_end_msg $?
+        ;;
+  status)
+
+        log_daemon_msg "Checking status of $DESC" "$NAME"
+        if running ;  then
+            log_progress_msg "running"
+            log_end_msg 0
+        else
+            log_progress_msg "apparently not running"
+            log_end_msg 1
+            exit 1
+        fi
+        ;;
+  # Use this if the daemon cannot reload
+  reload)
+        log_warning_msg "Reloading $NAME daemon: not implemented, as the daemon"
+        log_warning_msg "cannot re-read the config file (use restart)."
+        ;;
+  *)
+        N=/etc/init.d/openvswitch-testcontroller
+        echo "Usage: $N {start|stop|force-stop|restart|force-reload|status}" >&2
+        exit 1
+        ;;
+esac
+
+exit 0

openvswitch.changes

@@ -1,3 +1,74 @@
+-------------------------------------------------------------------
+Tue Mar  8 13:16:03 UTC 2016 - kmroz@suse.com
+
+- Add additional install requirements for python-openvswitch-test
+  package.
+
+-------------------------------------------------------------------
+Fri Mar  4 14:38:16 UTC 2016 - kmroz@suse.com
+
+- Add support for building both 2.4.0 and 2.5.0 from the same spec
+  file. Needed to fix SLE11 builds as OVS-2.5.0 no longer supports
+  python < 2.7. SLE11 SP3 and SP4 use python 2.6.
+- Added: openvswitch-2.4.0.tar.gz
+
+-------------------------------------------------------------------
+Thu Mar  3 13:47:04 UTC 2016 - kmroz@suse.com
+
+- New upstream version 2.5.0 (LTS)
+  - Dropped support for Python older than version 2.7.  As a consequence,
+    using Open vSwitch 2.5 or later on XenServer 6.5 or earlier (which
+    have Python 2.4) requires first installing Python 2.7.
+  - OpenFlow:
+    * Group chaining (where one OpenFlow group triggers another) is
+      now supported.
+    * OpenFlow 1.4+ "importance" is now considered for flow eviction.
+    * OpenFlow 1.4+ OFPTC_EVICTION is now implemented.
+    * OpenFlow 1.4+ OFPTC_VACANCY_EVENTS is now implemented.
+    * OpenFlow 1.4+ OFPMP_TABLE_DESC is now implemented.
+    * Allow modifying the ICMPv4/ICMPv6 type and code fields.
+    * OpenFlow 1.4+ OFPT_SET_ASYNC_CONFIG and OFPT_GET_ASYNC_CONFIG are
+      now implemented.
+  - ovs-ofctl:
+    * New "out_group" keyword for OpenFlow 1.1+ matching on output group.
+  - Tunnels:
+    * Geneve tunnels can now match and set options and the OAM bit.
+    * The nonstandard GRE64 tunnel extension has been dropped.
+  - Support Multicast Listener Discovery (MLDv1 and MLDv2).
+  - Add 'symmetric_l3l4' and 'symmetric_l3l4+udp' hash functions.
+  - sFlow agent now reports tunnel and MPLS structures.
+  - New 'check-system-userspace', 'check-kmod' and 'check-kernel' Makefile
+    targets to run a new system testsuite.  These tests can be run inside
+    a Vagrant box.  See INSTALL.md for details
+  - Mark --syslog-target argument as deprecated.  It will be removed in
+    the next OVS release.
+  - Added --user option to all daemons
+  - Add support for connection tracking through the new "ct" action
+    and "ct_state"/"ct_zone"/"ct_mark"/"ct_label" match fields.  Only
+    available on Linux kernels with the connection tracking module loaded.
+  - Add experimental version of OVN.  OVN, the Open Virtual Network, is a
+    system to support virtual network abstraction.  OVN complements the
+    existing capabilities of OVS to add native support for virtual network
+    abstractions, such as virtual L2 and L3 overlays and security groups.
+  - RHEL packaging:
+    * DPDK ports may now be created via network scripts (see README.RHEL).
+  - DPDK:
+    * Requires DPDK 2.2
+    * Added multiqueue support to vhost-user
+    * Note: QEMU 2.5+ required for multiqueue support
+  - SELinux:
+    * Introduced SELinux policy package.
+
+- New package: openvswitch-ovn
+- Removed: openvswitch-2.4.0.tar.gg
+- Added: openvswitch-2.5.0.tar.gg
+- Added: openvswitch-testcontroller.init
+- Added: ovn-controller-vtep.service
+- Added: ovn-controller.service
+- Added: ovn-northd.service
+- TODO: Explicit DPDK support not yet added to spec.
+- Spec file work and cleanup.
+
 -------------------------------------------------------------------
 Tue Mar  1 08:43:19 UTC 2016 - kmroz@suse.com
 

openvswitch.spec

@@ -24,8 +24,13 @@
 %bcond_with gui
 
 Name:           openvswitch
+%if 0%{?suse_version} > 1110
+Version:        2.5.0
+Release:        0
+%else
 Version:        2.4.0
 Release:        0
+%endif
 Summary:        An open source, production quality, multilayer virtual switch
 License:        Apache-2.0
 Group:          Productivity/Networking/System
@@ -37,8 +42,14 @@ Source4:        openvswitch-switch.logrotate
 Source5:        openvswitch-vtep.init
 Source6:        openvswitch-ipsec.init
 Source7:        openvswitch.service
+Source8:        openvswitch-testcontroller.init
 Source10:       Module.supported
 Source11:       Module.supported.updates
+%if 0%{?suse_version} > 1110
+Source12:       ovn-controller.service
+Source13:       ovn-controller-vtep.service
+Source14:       ovn-northd.service
+%endif
 Source99:       README.packager
 Patch2:         log-check-module-loop.patch
 BuildRequires:  autoconf
@@ -146,6 +157,22 @@ the Open vSwitch kernel-based switch.
 
 Open vSwitch is a full-featured software-based Ethernet switch.
 
+%if 0%{?suse_version} > 1110
+%package ovn
+Summary:        Open vSwitch - Open Virtual Network support
+License:        Apache-2.0
+Group:          Productivity/Networking/System
+Requires:       openvswitch = %{version}
+Requires:       openvswitch-switch = %{version}
+Requires:       openvswitch-vtep = %{version}
+
+%description ovn
+OVN, the Open Virtual Network, is a system to support virtual network
+abstraction.  OVN complements the existing capabilities of OVS to add
+native support for virtual network abstractions, such as virtual L2 and L3
+overlays and security groups.
+%endif
+
 %package pki
 Summary:        Open vSwitch public key infrastructure dependency package
 License:        Apache-2.0
@@ -164,6 +191,7 @@ Summary:        Open vSwitch VTEP emulator
 License:        Apache-2.0
 Group:          Productivity/Networking/System
 Requires:       openvswitch = %{version}
+Requires:       openvswitch-switch = %{version}
 # Since openvswitch/scripts/ovs-vtep requires various ovs python modules.
 Requires:       python-openvswitch = %{version}
 
@@ -195,6 +223,7 @@ Open vSwitch is a full-featured software-based Ethernet switch.
 Summary:        Python bindings for Open vSwitch
 License:        Python-2.0
 Group:          Productivity/Networking/System
+Requires:       openvswitch = %{version}
 Requires:       python
 
 %description -n python-openvswitch
@@ -204,7 +233,10 @@ This package contains the full Python bindings for Open vSwitch database.
 Summary:        Python bindings for Open vSwitch
 License:        Python-2.0
 Group:          Productivity/Networking/System
+Requires:       openvswitch = %{version}
 Requires:       python
+Requires:       python-openvswitch = %{version}
+Requires:       python-twisted
 
 %description -n python-openvswitch-test
 This package contains the full Python bindings for Open vSwitch database.
@@ -240,6 +272,7 @@ Open vSwitch is a full-featured software-based Ethernet switch.
 Summary:        Open vSwitch test package
 License:        Apache-2.0
 Group:          Productivity/Networking/System
+Requires:       openvswitch = %{version}
 Requires:       python
 Requires:       python-argparse
 Requires:       python-openvswitch-test = %{version}
@@ -329,15 +362,25 @@ install -m 755 %{SOURCE2} \
          %{buildroot}/%{_sysconfdir}/init.d/%{name}-switch
 install -m 755 %{SOURCE5} \
          %{buildroot}/%{_sysconfdir}/init.d/%{name}-vtep
+install -m 755 %{SOURCE8} \
+         %{buildroot}/%{_sysconfdir}/init.d/%{name}-testcontroller
 
 %if 0%{?suse_version} > 1230
 ln -sf %_sbindir/service %{buildroot}%{_sbindir}/rc%{name}-switch
 ln -sf %_sbindir/service %{buildroot}%{_sbindir}/rc%{name}-vtep
+ln -sf %_sbindir/service %{buildroot}%{_sbindir}/rc%{name}-testcontroller
 install -D -m 644 %{SOURCE7} \
         %{buildroot}%{_unitdir}/openvswitch.service
+install -D -m 644 %{SOURCE12} \
+        %{buildroot}%{_unitdir}/ovn-controller.service
+install -D -m 644 %{SOURCE13} \
+        %{buildroot}%{_unitdir}/ovn-controller-vtep.service
+install -D -m 644 %{SOURCE14} \
+        %{buildroot}%{_unitdir}/ovn-northd.service
 %else
 ln -sf %{_sysconfdir}/init.d/%{name}-switch %{buildroot}%{_sbindir}/rc%{name}-switch
 ln -sf %{_sysconfdir}/init.d/%{name}-vtep %{buildroot}%{_sbindir}/rc%{name}-vtep
+ln -sf %{_sysconfdir}/init.d/%{name}-testcontroller %{buildroot}%{_sbindir}/rc%{name}-testcontroller
 %endif
 
 install -d -m 755 %{buildroot}/%{_sysconfdir}/sysconfig
@@ -395,6 +438,44 @@ rmdir %{buildroot}%{_datadir}/%{name}/python
 %endif
 %insserv_cleanup
 
+%if 0%{?suse_version} > 1110
+%pre ovn
+%if 0%{?suse_version} > 1230
+%service_add_pre ovn-controller.service
+%service_add_pre ovn-controller-vtep.service
+%service_add_pre ovn-northd.service
+%endif
+
+%post ovn
+/sbin/ldconfig
+%if 0%{?suse_version} > 1230
+%service_add_post ovn-controller.service
+%service_add_post ovn-controller-vtep.service
+%service_add_post ovn-northd.service
+%endif
+
+%preun ovn
+%if 0%{?suse_version} > 1230
+%service_del_preun ovn-controller.service
+%service_del_preun ovn-controller-vtep.service
+%service_del_preun ovn-northd.service
+%endif
+
+%postun ovn
+%if 0%{?suse_version} > 1230
+%service_del_postun ovn-controller.service
+%service_del_postun ovn-controller-vtep.service
+%service_del_postun ovn-northd.service
+%endif
+/sbin/ldconfig
+%endif
+
+%preun test
+%stop_on_removal openvswitch-testcontroller
+
+%postun test
+%restart_on_update openvswitch-testcontroller
+
 %post vtep -p /sbin/ldconfig
 
 %preun vtep
@@ -513,6 +594,35 @@ rmdir %{buildroot}%{_datadir}/%{name}/python
 %endif
 %dir /var/log/openvswitch
 
+%if 0%{?suse_version} > 1110
+%files ovn
+%{_bindir}/ovn-controller
+%{_bindir}/ovn-controller-vtep
+%{_bindir}/ovn-docker-overlay-driver
+%{_bindir}/ovn-docker-underlay-driver
+%{_bindir}/ovn-nbctl
+%{_bindir}/ovn-northd
+%{_bindir}/ovn-sbctl
+%{_datadir}/openvswitch/scripts/ovn-ctl
+%{_libdir}/libovn.so.*
+%{_mandir}/man5/ovn-nb.5*
+%{_mandir}/man5/ovn-sb.5*
+%{_mandir}/man7/ovn-architecture.7*
+%{_mandir}/man8/ovn-controller.8*
+%{_mandir}/man8/ovn-controller-vtep.8*
+%{_mandir}/man8/ovn-ctl.8*
+%{_mandir}/man8/ovn-nbctl.8*
+%{_mandir}/man8/ovn-northd.8*
+%{_mandir}/man8/ovn-sbctl.8*
+%config %{_datadir}/openvswitch/ovn-nb.ovsschema
+%config %{_datadir}/openvswitch/ovn-sb.ovsschema
+%if 0%{?suse_version} > 1230
+%{_unitdir}/ovn-controller.service
+%{_unitdir}/ovn-controller-vtep.service
+%{_unitdir}/ovn-northd.service
+%endif
+%endif
+
 %files test
 %defattr(-,root,root)
 %{_bindir}/ovs-test
@@ -523,6 +633,8 @@ rmdir %{buildroot}%{_datadir}/%{name}/python
 %{_mandir}/man8/ovs-l3ping.8.gz
 %{_mandir}/man8/ovs-vlan-test.8.gz
 %{_mandir}/man8/ovs-testcontroller.8.gz
+%{_sysconfdir}/init.d/openvswitch-testcontroller
+%{_sbindir}/rc%{name}-testcontroller
 
 %files devel
 %defattr(-,root,root)
@@ -530,6 +642,10 @@ rmdir %{buildroot}%{_datadir}/%{name}/python
 %{_libdir}/libofproto.la
 %{_libdir}/libopenvswitch.so
 %{_libdir}/libopenvswitch.la
+%if 0%{?suse_version} > 1110
+%{_libdir}/libovn.so
+%{_libdir}/libovn.la
+%endif
 %{_libdir}/libovsdb.so
 %{_libdir}/libovsdb.la
 %{_libdir}/libsflow.so

ovn-controller-vtep.service

@@ -0,0 +1,30 @@
+#
+# You may override the following variables to customize ovn-controller-vtep
+# behavior:
+#
+#   OVN_DB - Set this variable to the location of the ovsdb server that is
+#            serving the OVN_Southbound database.  See the manpage for
+#            ovn-controller-vtep for more details on the format for the db
+#            location.
+#
+#   VTEP_DB - Set this variable to the location of the ovsdb server that is
+#             serving the hardware_vtep database.  See the manpage for
+#             ovn-controller-vtep for more details on the format for the db
+#             location.
+#
+
+[Unit]
+Description=OVN VTEP gateway controller daemon
+After=syslog.target
+Requires=openvswitch.service
+After=openvswitch.service
+
+[Service]
+Type=simple
+Environment=OVS_RUNDIR=%t/openvswitch
+Environment=OVN_DB=unix:%t/openvswitch/db.sock
+Environment=VTEP_DB=unix:%t/openvswitch/db.sock
+ExecStart=/usr/bin/ovn-controller-vtep -vconsole:emer -vsyslog:err -vfile:info \
+          --log-file=/var/log/openvswitch/ovn-controller-vtep.log \
+          --no-chdir --pidfile=${OVS_RUNDIR}/ovn-controller-vtep.pid \
+          --ovnsb-db=${OVN_DB} --vtep-db=${VTEP_DB}

ovn-controller.service

@@ -0,0 +1,22 @@
+#
+# You may override the following variables to customize ovn-controller behavior:
+#
+#   OVS_DB - Set this variable to the location of the ovsdb server that is
+#            serving the Open_vSwitch database for the local ovs-vswitchd.
+#            See the manpage for ovn-controller for more details on the
+#            format for the db location.
+#
+
+[Unit]
+Description=OVN controller daemon
+After=syslog.target
+Requires=openvswitch.service
+After=openvswitch.service
+
+[Service]
+Type=simple
+Environment=OVS_RUNDIR=%t/openvswitch
+Environment=OVS_DB=unix:%t/openvswitch/db.sock
+ExecStart=/usr/bin/ovn-controller -vconsole:emer -vsyslog:err -vfile:info \
+          --log-file=/var/log/openvswitch/ovn-controller.log \
+          --no-chdir --pidfile=${OVS_RUNDIR}/ovn-controller.pid ${OVS_DB}

ovn-northd.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=OVN northd management daemon
+After=syslog.target
+Requires=openvswitch.service
+After=openvswitch.service
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+Environment=OVS_RUNDIR=%t/openvswitch OVS_DBDIR=/var/lib/openvswitch
+ExecStart=/usr/share/openvswitch/scripts/ovn-ctl start_northd
+ExecStop=/usr/share/openvswitch/scripts/ovn-ctl stop_northd