SHA256
1
0
forked from pool/proftpd

12 Commits

Author SHA256 Message Date
a3486c4395 Accepting request 1285521 from network
Switch to _service, some cleanup (forwarded request 1285520 from computersalat)

OBS-URL: https://build.opensuse.org/request/show/1285521
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/proftpd?expand=0&rev=56
2025-06-13 16:48:43 +00:00
Christian Wittmer
c7da2e50c6 Switch to _service, some cleanup
OBS-URL: https://build.opensuse.org/package/show/network/proftpd?expand=0&rev=114
2025-06-13 13:42:50 +00:00
Christian Wittmer
31cbbcf6ad Switch to _service, some cleanup
OBS-URL: https://build.opensuse.org/package/show/network/proftpd?expand=0&rev=113
2025-06-13 13:00:49 +00:00
Christian Wittmer
d920ad2bc9 Update to 1.3.9
OBS-URL: https://build.opensuse.org/package/show/network/proftpd?expand=0&rev=112
2025-06-13 09:53:17 +00:00
d1764655a7 Accepting request 1285190 from network
Update to 1.3.8d (forwarded request 1285189 from computersalat)

OBS-URL: https://build.opensuse.org/request/show/1285190
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/proftpd?expand=0&rev=55
2025-06-12 16:11:42 +00:00
Christian Wittmer
77954d6e08 Update to 1.3.8d
OBS-URL: https://build.opensuse.org/package/show/network/proftpd?expand=0&rev=110
2025-06-12 14:57:09 +00:00
dff1d47813 Accepting request 1253625 from network
OBS-URL: https://build.opensuse.org/request/show/1253625
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/proftpd?expand=0&rev=54
2025-03-17 21:18:19 +00:00
afe40d4ad9 build with pcre2
OBS-URL: https://build.opensuse.org/package/show/network/proftpd?expand=0&rev=108
2025-03-17 08:26:37 +00:00
d5c653264f Accepting request 1247355 from network
fix for boo#1236889 (CVE-2024-57392) (forwarded request 1247354 from computersalat)

OBS-URL: https://build.opensuse.org/request/show/1247355
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/proftpd?expand=0&rev=53
2025-02-20 15:41:58 +00:00
Christian Wittmer
d4d1e490d9 fix for boo#1236889 (CVE-2024-57392)
OBS-URL: https://build.opensuse.org/package/show/network/proftpd?expand=0&rev=106
2025-02-20 10:17:05 +00:00
3b34634f85 Accepting request 1236871 from network
OBS-URL: https://build.opensuse.org/request/show/1236871
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/proftpd?expand=0&rev=52
2025-01-12 10:21:05 +00:00
2b9228d5c4 fix for boo#1233997 (CVE-2024-48651)
OBS-URL: https://build.opensuse.org/package/show/network/proftpd?expand=0&rev=104
2025-01-10 13:13:12 +00:00
15 changed files with 119 additions and 308 deletions

18
_service Normal file
View File

@@ -0,0 +1,18 @@
<?xml version="1.0" ?>
<services>
<service name="obs_scm" mode="manual">
<param name="url">https://github.com/proftpd/proftpd.git</param>
<param name="scm">git</param>
<param name="revision">v1.3.9</param>
<param name="versionformat">@PARENT_TAG@</param>
<param name="versionrewrite-pattern">v(.*)</param>
<param name="exclude">.git</param>
<param name="changesgenerate">disable</param>
</service>
<service name="set_version" mode="buildtime"/>
<service name="tar" mode="buildtime"/>
<service name="recompress" mode="buildtime">
<param name="file">*.tar</param>
<param name="compression">xz</param>
</service>
</services>

View File

@@ -18,6 +18,6 @@ Index: contrib/dist/rpm/proftpd.service
+ProtectControlGroups=true
+RestrictRealtime=true
+# end of automatic additions
Type = simple
Type = forking
Environment = PROFTPD_OPTIONS=
EnvironmentFile = -/etc/sysconfig/proftpd

View File

@@ -1,3 +0,0 @@
version https://git-lfs.github.com/spec/v1
oid sha256:183ab7c6107de271a2959ff268f55c9b6c76b2cf0029e6584fccc019686601e0
size 19752808

View File

@@ -1,7 +0,0 @@
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - https://gpgtools.org
iEYEABECAAYFAmWCcGMACgkQt46JP6URl2rOOACgqd6poiniUeOej3gVoE4ZHA1Z
PKgAoKgsyi9zqoilnOtZJKfzWw4BJ546
=GIJC
-----END PGP SIGNATURE-----

3
proftpd-1.3.9.obscpio Normal file
View File

@@ -0,0 +1,3 @@
version https://git-lfs.github.com/spec/v1
oid sha256:b7e555e8f87ce1eb5ee0e6002e62f68b6d78206cb284a36328ead4262cb653c7
size 54485518

View File

@@ -1,3 +1,66 @@
-------------------------------------------------------------------
Fri Jun 13 13:11:39 UTC 2025 - chris@computersalat.de
- switch to _service file
* Add _service
* Remove proftpd-1.3.9.tar.gz
* Remove proftpd-1.3.9.tar.gz.asc
- rename patches
* proftpd-basic.conf.patch -> proftpd_basic.conf.patch
* proftpd-dist.patch -> proftpd_dist.patch
* proftpd-ftpasswd.patch -> proftpd_ftpasswd.patch
* proftpd-no_BuildDate.patch -> proftpd_no-BuildDate.patch
* proftpd-strip.patch -> proftpd_strip.patch
- Update proftpd.service file
- cleanup spec
* Remove SysVinit stuff
- Remove proftpd.init file
-------------------------------------------------------------------
Fri Jun 13 09:46:29 UTC 2025 - chris@computersalat.de
- 1.3.9 - Released 14-Mar-2025
* http://proftpd.org/docs/NEWS-1.3.9
- rebase patches
* harden_proftpd.service.patch
* proftpd-no_BuildDate.patch
-------------------------------------------------------------------
Thu Jun 12 12:51:04 UTC 2025 - chris@computersalat.de
- 1.3.8d - Released 14-Mar-2025
* http://proftpd.org/docs/NEWS-1.3.8d
- rebase patch
* proftpd-no_BuildDate.patch
- remove obsolete patch
* proftpd-null_pointer.patch
-------------------------------------------------------------------
Fri Mar 14 15:16:10 UTC 2025 - Andreas Stieger <andreas.stieger@gmx.de>
- build with pcre2
-------------------------------------------------------------------
Thu Feb 20 09:05:57 UTC 2025 - chris@computersalat.de
- fix for boo#1236889 (CVE-2024-57392)
https://github.com/proftpd/proftpd/issues/1866
Some of the fuzzing tests submitted in the advisory ran into existing null
pointer dereferences (not buffer overflows); let's correct them.
- Add proftpd-null_pointer.patch
-------------------------------------------------------------------
Thu Jan 9 17:25:19 UTC 2025 - chris@computersalat.de
- 1.3.8c - Released 11-Dec-2024
fix for boo#1233997 (CVE-2024-48651)
* http://proftpd.org/docs/NEWS-1.3.8c
gh#1830 - Supplemental group inheritance grants unintended access to GID 0
due to lack of supplemental groups from mod_sql
https://github.com/proftpd/proftpd/issues/1830
- rebase patch
* proftpd-no_BuildDate.patch
-------------------------------------------------------------------
Thu Feb 29 14:45:47 UTC 2024 - Dominique Leuenberger <dimstar@opensuse.org>

View File

@@ -1,222 +0,0 @@
#! /bin/sh
# Copyright (c) 1995-2004 SUSE Linux AG, Nuernberg, Germany.
# All rights reserved.
#
# Author: Kurt Garloff
# Please send feedback to http://www.suse.de/feedback/
#
# /etc/init.d/proftpd
# and its symbolic link
# /(usr/)sbin/rcproftpd
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
### BEGIN INIT INFO
# Provides: proftpd
# Required-Start: $syslog $remote_fs
# Should-Start: $time ypbind sendmail
# Required-Stop: $syslog $remote_fs
# Should-Stop: $time ypbind sendmail
# Default-Start: 3 5
# Default-Stop: 0 1 2 6
# Short-Description: ProFTPD daemon
# Description: Start ProFTPD to allow XY and provide YZ
### END INIT INFO
#
# Note on runlevels:
# 0 - halt/poweroff 6 - reboot
# 1 - single user 2 - multiuser without network exported
# 3 - multiuser w/ network (text mode) 5 - multiuser w/ network and X11 (xdm)
#
# Note on script names:
# http://www.linuxbase.org/spec/refspecs/LSB_1.3.0/gLSB/gLSB/scrptnames.html
# A registry has been set up to manage the init script namespace.
# http://www.lanana.org/
# Please use the names already registered or register one or use a
# vendor prefix.
# Check for missing binaries (stale symlinks should not happen)
# Note: Special treatment of stop for LSB conformance
PROFTPD_BIN=/usr/sbin/proftpd
test -x $PROFTPD_BIN || { echo "$PROFTPD_BIN not installed";
if [ "$1" = "stop" ]; then exit 0;
else exit 5; fi; }
PROFTPD_RUNDIR=/var/run/proftpd
# Check for existence of needed config file and read it
#PROFTPD_CONFIG=/etc/sysconfig/proftpd
#test -r $PROFTPD_CONFIG || { echo "$PROFTPD_CONFIG not existing";
# if [ "$1" = "stop" ]; then exit 0;
# else exit 6; fi; }
#
# Read config
#. $PROFTPD_CONFIG
# Source LSB init functions
# providing start_daemon, killproc, pidofproc,
# log_success_msg, log_failure_msg and log_warning_msg.
# This is currently not used by UnitedLinux based distributions and
# not needed for init scripts for UnitedLinux only. If it is used,
# the functions from rc.status should not be sourced or used.
#. /lib/lsb/init-functions
# Shell functions sourced from /etc/rc.status:
# rc_check check and set local and overall rc status
# rc_status check and set local and overall rc status
# rc_status -v be verbose in local rc status and clear it afterwards
# rc_status -v -r ditto and clear both the local and overall rc status
# rc_status -s display "skipped" and exit with status 3
# rc_status -u display "unused" and exit with status 3
# rc_failed set local and overall rc status to failed
# rc_failed <num> set local and overall rc status to <num>
# rc_reset clear both the local and overall rc status
# rc_exit exit appropriate to overall rc status
# rc_active checks whether a service is activated by symlinks
. /etc/rc.status
# Reset status of this service
rc_reset
# Return values acc. to LSB for all commands but status:
# 0 - success
# 1 - generic or unspecified error
# 2 - invalid or excess argument(s)
# 3 - unimplemented feature (e.g. "reload")
# 4 - user had insufficient privileges
# 5 - program is not installed
# 6 - program is not configured
# 7 - program is not running
# 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
#
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signaling is not supported) are
# considered a success.
case "$1" in
start)
if [ ! -d $PROFTPD_RUNDIR ]; then
mkdir -p $PROFTPD_RUNDIR
fi
echo -n "Starting proftpd "
## Start daemon with startproc(8). If this fails
## the return value is set appropriately by startproc.
/sbin/startproc $PROFTPD_BIN
# Remember status and be verbose
rc_status -v
;;
stop)
echo -n "Shutting down proftpd "
## Stop daemon with killproc(8) and if this fails
## killproc sets the return value according to LSB.
/sbin/killproc -TERM $PROFTPD_BIN
# Remember status and be verbose
rc_status -v
;;
try-restart|condrestart)
## Do a restart only if the service was active before.
## Note: try-restart is now part of LSB (as of 1.9).
## RH has a similar command named condrestart.
if test "$1" = "condrestart"; then
echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
fi
$0 status
if test $? = 0; then
$0 restart
else
rc_reset # Not running is not a failure.
fi
# Remember status and be quiet
rc_status
;;
restart)
## Stop the service and regardless of whether it was
## running or not, start it again.
$0 stop
$0 start
# Remember status and be quiet
rc_status
;;
force-reload)
echo -n "Reload service proftpd "
## Signal the daemon to reload its config. Most daemons
## do this on signal 1 (SIGHUP).
## If it does not support it, restart the service if it
## is running.
# if it supports it:
/sbin/killproc -HUP $PROFTPD_BIN
#touch /var/run/proftpd.pid
# Remember status and be verbose
rc_status -v
## Otherwise:
#$0 try-restart
#rc_status
;;
reload)
echo -n "Reload service proftpd "
## Like force-reload, but if daemon does not support
## signaling, do nothing (!)
# If it supports signaling:
/sbin/killproc -HUP $PROFTPD_BIN
#touch /var/run/proftpd.pid
# Remember status and be verbose
rc_status -v
## Otherwise if it does not support reload:
#rc_failed 3
#rc_status -v
;;
status)
echo -n "Checking for service proftpd "
## Check status with checkproc(8), if process is running
## checkproc will return with exit status 0.
# Return value is slightly different for the status command:
# 0 - service up and running
# 1 - service dead, but /var/run/ pid file exists
# 2 - service dead, but /var/lock/ lock file exists
# 3 - service not running (unused)
# 4 - service status unknown :-(
# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
# NOTE: checkproc returns LSB compliant status values.
/sbin/checkproc $PROFTPD_BIN
# NOTE: rc_status knows that we called this init script with
# "status" option and adapts its messages accordingly.
# Remember status and be verbose
rc_status -v
;;
probe)
## Optional: Probe for the necessity of a reload, print out the
## argument to this init script which is required for a reload.
## Note: probe is not (yet) part of LSB (as of 1.9)
test /etc/proftpd/proftpd.conf -nt $PROFTPD_RUNDIR/proftpd.pid && echo reload
;;
*)
echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
exit 1
;;
esac
rc_exit

4
proftpd.obsinfo Normal file
View File

@@ -0,0 +1,4 @@
name: proftpd
version: 1.3.9
mtime: 1741976891
commit: ae25959adb05ae1d6ebfa1f36bf778c9c34e9410

View File

@@ -15,7 +15,11 @@ ProtectKernelLogs=true
ProtectControlGroups=true
RestrictRealtime=true
# end of automatic additions
ExecStart=/usr/sbin/proftpd --nodaemon
Type=forking
Environment=PROFTPD_OPTIONS=
EnvironmentFile=-/etc/sysconfig/proftpd
ExecStartPre=/usr/sbin/proftpd --configtest
ExecStart=/usr/sbin/proftpd $PROFTPD_OPTIONS
ExecReload=/bin/kill -HUP $MAINPID
[Install]

View File

@@ -1,7 +1,7 @@
#
# spec file for package proftpd
#
# Copyright (c) 2024 SUSE LLC
# Copyright (c) 2025 SUSE LLC
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
@@ -17,28 +17,21 @@
%define with_redis 1
%define with_sodium 1
%if 0%{?suse_version} == 1315 || 0%{?suse_version} == 1500
%if 0%{?suse_version} == 1500
%define with_redis 0
%endif
%if 0%{?suse_version} == 1315
%define with_sodium 0
%endif
Name: proftpd
Summary: Configurable GPL-licensed FTP server software
# Please save your time and do not update to "rc" versions.
# We only accept updates for "STABLE" Versions
License: GPL-2.0-or-later
Group: Productivity/Networking/Ftp/Servers
Version: 1.3.8b
Version: 1.3.9
Release: 0
URL: http://www.proftpd.org/
Source0: ftp://ftp.proftpd.org/distrib/source/%{name}-%{version}.tar.gz
Source1: ftp://ftp.proftpd.org/distrib/source/%{name}-%{version}.tar.gz.asc
Source11: %{name}.init
Source0: %{name}-%{version}.tar.xz
Source12: %{name}.passwd
Source13: %{name}.service
Source14: %{name}.tmpfile
@@ -47,21 +40,21 @@ Source16: %{name}-tls.template
Source17: %{name}-limit.template
Source18: %{name}-ssl.README
#PATCH-FIX-openSUSE: pam, logrotate, xinet
Patch100: %{name}-dist.patch
Patch100: %{name}_dist.patch
#PATCH-FIX-openSUSE: provide a useful default config
Patch101: %{name}-basic.conf.patch
Patch101: %{name}_basic.conf.patch
#PATCH-FIX: provide more info on usage ;)
Patch102: %{name}-ftpasswd.patch
Patch102: %{name}_ftpasswd.patch
#PATCH-FIX: fix strip
Patch103: %{name}-strip.patch
Patch103: %{name}_strip.patch
#PATCH-FIX-openSUSE: file-contains-date-and-time
Patch104: %{name}-no_BuildDate.patch
Patch104: %{name}_no-BuildDate.patch
#RPMLINT-FIX-openSUSE: env-script-interpreter
Patch105: %{name}_env-script-interpreter.patch
#openSUSE:Security_Features#Systemd_hardening_effort
Patch106: harden_proftpd.service.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-build
#BuildRequires: gpg-offline
#
BuildRequires: cyrus-sasl-devel
BuildRequires: fdupes
BuildRequires: gcc-c++
@@ -74,33 +67,26 @@ BuildRequires: libattr-devel
BuildRequires: libmemcached-devel
#BuildRequires: libGeoIP-devel
BuildRequires: libmysqld-devel
%if 0%{?with_sodium}
BuildRequires: libsodium-devel
%endif
BuildRequires: ncurses-devel
BuildRequires: openldap2-devel
BuildRequires: pam-devel
BuildRequires: pcre-devel
BuildRequires: pcre2-devel
BuildRequires: pkg-config
BuildRequires: postgresql-devel
BuildRequires: sqlite3-devel
BuildRequires: unixODBC-devel
BuildRequires: pkgconfig(libssl)
Requires: logrotate
%if 0%{?lang_package:1} > 0
Recommends: %{name}-lang
%endif
%if 0%{?suse_version} >= 1210
#
BuildRequires: systemd-rpm-macros
%{?systemd_ordering}
%define has_systemd 1
%else
Requires(pre): %insserv_prereq
%endif
%if 0%{?suse_version} >= 1330
#
Requires(pre): group(ftp)
Requires(pre): user(ftp)
Requires: logrotate
%if 0%{?lang_package:1} > 0
Recommends: %{name}-lang
%endif
%description
@@ -168,8 +154,6 @@ Here are Documentation for ProFTPD
%prep
%autosetup -p0
rm README.AIX README.cygwin README.FreeBSD README.Solaris2.5x README.Unixware
%build
rm contrib/mod_wrap.c
rm contrib/mod_geoip.c
@@ -180,11 +164,7 @@ export CXXFLAGS="$CFLAGS"
--bindir=%{_sbindir} \
--libexecdir=%{_libdir}/%{name} \
--sysconfdir=%{_sysconfdir}/%{name} \
%if 0%{?has_systemd}
--localstatedir=/run/%{name} \
%else
--localstatedir=%{_localstatedir}/run/%{name} \
%endif
--enable-sendfile \
--enable-ctrls \
--enable-dso \
@@ -193,7 +173,7 @@ export CXXFLAGS="$CFLAGS"
--enable-memcache \
--enable-nls \
--enable-openssl \
--enable-pcre \
--enable-pcre2 \
%if 0%{?with_redis}
--enable-redis \
%endif
@@ -204,10 +184,6 @@ export CXXFLAGS="$CFLAGS"
--disable-ident \
--disable-strip
# --enable-memcache \
# --enable-pcre \
# --enable-redis \
# --enable-shadow \
make %{?_smp_mflags}
%install
@@ -233,25 +209,18 @@ install -D -m 0644 %{S:17} %{buildroot}/%{_sysconfdir}/%{name}/includes/limit.te
install -D -m 0644 %{S:18} %{buildroot}/%{_sysconfdir}/%{name}/ssl/README
install -d -m 0750 %{buildroot}/var/log/%{name}
# systemd vs SysVinit
%if 0%{?has_systemd}
# systemd
install -D -m 0644 %{S:13} %{buildroot}%{_unitdir}/%{name}.service
ln -sf %{_sbindir}/service %{buildroot}/%{_sbindir}/rc%{name}
# systemd need to create a tmp dir: /run/proftpd
install -D -m 0644 %{S:14} %{buildroot}%{_tmpfilesdir}/%{name}.conf
%else #SysVinit
install -D -m 0755 %{S:11} %{buildroot}/%{_sysconfdir}/init.d/%{name}
ln -sf %{_sysconfdir}/init.d/%{name} %{buildroot}/%{_sbindir}/rc%{name}
%endif
%fdupes -s %{buildroot}%{_sysconfdir}/%{name}
%find_lang %{name}
%pre
%if 0%{?has_systemd}
%service_add_pre %{name}.service
%endif
%if 0%{?suse_version} > 1500
# Prepare for migration to /usr/lib; save any old .rpmsave
for i in pam.d/proftpd ; do
@@ -266,28 +235,14 @@ done
%endif
%preun
%if 0%{?has_systemd}
%service_del_preun %{name}.service
%else
%stop_on_removal %{name}
%endif
%post
%if 0%{?has_systemd}
%service_add_post %{name}.service
%tmpfiles_create %{_tmpfilesdir}/%{name}.conf
%else
%{fillup_and_insserv -f proftpd}
install -d %{_localstatedir}/run/%{name}
%endif
%postun
%if 0%{?has_systemd}
%service_del_postun %{name}.service
%else
%restart_on_update %{name}
%{insserv_cleanup}
%endif
%if 0%{?lang_package:1} > 0
%files lang -f %{name}.lang
@@ -341,13 +296,9 @@ install -d %{_localstatedir}/run/%{name}
%exclude %{_libdir}/%{name}/mod_sql_postgres.so
%exclude %{_libdir}/%{name}/mod_radius.so
%exclude %{_libdir}/%{name}/mod_sql_sqlite.so
%if 0%{?has_systemd}
%{_unitdir}/%{name}.service
%{_tmpfilesdir}/%{name}.conf
%ghost %dir /run/%{name}
%else
%{_sysconfdir}/init.d/%{name}
%endif
%files devel
%defattr(-,root,root)

View File

@@ -22,7 +22,7 @@ Index: src/main.c
===================================================================
--- src/main.c.orig
+++ src/main.c
@@ -1989,8 +1989,8 @@ static void standalone_main(void) {
@@ -1985,8 +1985,8 @@ static void standalone_main(void) {
exit(1);
}
@@ -33,7 +33,7 @@ Index: src/main.c
daemon_loop();
}
@@ -2145,7 +2145,6 @@ static void show_settings(void) {
@@ -2141,7 +2141,6 @@ static void show_settings(void) {
show_os_release();
@@ -41,7 +41,7 @@ Index: src/main.c
printf("%s", " Built With:\n configure " PR_BUILD_OPTS "\n\n");
printf("%s", " CFLAGS: " PR_BUILD_CFLAGS "\n");
@@ -2742,7 +2741,6 @@ int main(int argc, char *argv[], char **
@@ -2738,7 +2737,6 @@ int main(int argc, char *argv[], char **
if (show_version >= 2) {
printf("ProFTPD Version: %s", PROFTPD_VERSION_TEXT " " PR_STATUS "\n");
printf(" Scoreboard Version: %08x\n", PR_SCOREBOARD_VERSION);
@@ -99,5 +99,5 @@ Index: include/version.h
-#include "buildstamp.h"
-
/* Application version (in various forms) */
#define PROFTPD_VERSION_NUMBER 0x0001030807
#define PROFTPD_VERSION_TEXT "1.3.8b"
#define PROFTPD_VERSION_NUMBER 0x0001030904
#define PROFTPD_VERSION_TEXT "1.3.9"