rpm/python3-azurectl
SHA256
1
0
Fork 0
forked from pool/python3-azurectl
Code Pull Requests Activity
Files
factory
python3-azurectl/python3-azurectl.changes
Marcus Schaefer e07e8d3a41 - Bump version: 3.0.3 → 3.0.4 
- Run tox for unit tests in Makefile
  

  
- added tox check target to run flake8 tests
  

  
- Bump version: 3.0.2 → 3.0.3
  

  
- Added tox python 3.4 target
  

  
- Exit code for --version | --help should be zero
  

  
- Add tox setup for easier development
  

  
- Update path to publishsettings downloader

OBS-URL: https://build.opensuse.org/package/show/Cloud:Tools/python3-azurectl?expand=0&rev=4
2018-09-21 08:46:56 +00:00

4279 lines
139 KiB
Plaintext
Raw Permalink Blame History

-------------------------------------------------------------------
Fri Sep 21 10:45:04 CEST 2018 - ms@suse.de
- Bump version: 3.0.3 → 3.0.4
-------------------------------------------------------------------
Fri Sep 21 10:44:37 CEST 2018 - ms@suse.de
- Run tox for unit tests in Makefile
-------------------------------------------------------------------
Fri Sep 21 10:39:34 CEST 2018 - ms@suse.de
- added tox check target to run flake8 tests
-------------------------------------------------------------------
Fri Sep 21 10:35:21 CEST 2018 - ms@suse.de
- Bump version: 3.0.2 → 3.0.3
-------------------------------------------------------------------
Wed Sep 19 16:55:01 CEST 2018 - ms@suse.de
- Added tox python 3.4 target
-------------------------------------------------------------------
Wed Sep 19 11:51:24 CEST 2018 - ms@suse.de
- Exit code for --version | --help should be zero
-------------------------------------------------------------------
Wed Sep 19 11:50:23 CEST 2018 - ms@suse.de
- Add tox setup for easier development
-------------------------------------------------------------------
Wed Sep 12 13:27:52 CEST 2018 - jmason@suse.de
- Update path to publishsettings downloader
... and add an additional note about preselecting the proper subscription.
-------------------------------------------------------------------
Wed Aug 9 16:21:15 CEST 2017 - ms@suse.de
- Bump version: 3.0.1 → 3.0.2
-------------------------------------------------------------------
Wed Aug 9 16:20:30 CEST 2017 - ms@suse.de
- Ran osc service localrun format_spec_file
Make obs happy with regards to missing Copyright information
-------------------------------------------------------------------
Tue Aug 8 16:59:38 CEST 2017 - ms@suse.de
- Add azurectl to pypi
-------------------------------------------------------------------
Thu Aug 3 10:36:20 CEST 2017 - ms@suse.de
- Bump version: 3.0.0 → 3.0.1
-------------------------------------------------------------------
Wed Aug 2 14:16:27 CEST 2017 - sean.marlow@suse.de
- Make all imports absolute.
Update all explicit relative imports to absolute imports.
-------------------------------------------------------------------
Thu Jul 13 10:32:19 CEST 2017 - ms@suse.de
- Refactor handling of request IDs
Added unify_id method for request id validation
The request id value from the Azure rest api is not consistently
of the same type which makes it hard to handle the id if it could
be a string or a number. This commit introduce a static method
called unify_id which allows us to properly format the id into
a common value so that azurectl can consume the information in
the same way all over the place. So far unify_id just python
formats the information into a string.
For the handling of the cloud service request id an explicit
conversion into a number is performed in addition to the
refactoring code
-------------------------------------------------------------------
Wed Jul 12 12:24:37 CEST 2017 - ms@suse.de
- Refactor XZ reading of size bytes
Implement a read buffer for XZ decompression. It's required that we
can read an exact number of uncompressed bytes from the XZ stream.
As the max_length parameter was added to the lzma.decompress()
method with python 3.5 for the first time and we have to stay
compatible with 3.4 a self written solution to this problem was
required
-------------------------------------------------------------------
Tue Jul 11 15:35:46 CEST 2017 - ms@suse.de
- Bump version: 2.3.2 → 3.0.0
-------------------------------------------------------------------
Tue Jul 11 09:16:59 CEST 2017 - ms@suse.de
- Refactor XZ uncompressed_size method
Use lzma seek in stream instead of calling xz to lookup
the uncompressed size.
-------------------------------------------------------------------
Fri Jul 7 16:32:14 CEST 2017 - ms@suse.de
- Move azurectl code base and package to python3
-------------------------------------------------------------------
Tue Jun 27 12:15:53 CEST 2017 - sean.marlow@suse.de
- Add requirement for pyOpenSSL.
Remove requests and dnspython from requirements.
- Requests is indrectly required by azure sdk.
- dnspython is not required, build and tests all pass without.
-------------------------------------------------------------------
Tue May 9 09:12:43 CEST 2017 - ms@suse.de
- Fixed typo is vs. it
-------------------------------------------------------------------
Fri Apr 28 14:49:27 CEST 2017 - jmason@suse.de
- Fixup some github-flavored-markdown style issues
-------------------------------------------------------------------
Fri Apr 7 10:20:40 CEST 2017 - ms@suse.de
- Bump version: 2.3.1 → 2.3.2
-------------------------------------------------------------------
Mon Apr 3 12:42:26 CEST 2017 - ms@suse.de
- Be more clear on the reboot type
Update code comment explaining why we can't really wait
for a soft reboot through the API to complete
-------------------------------------------------------------------
Fri Mar 31 10:11:13 CEST 2017 - ms@suse.de
- Follow up fix for vm wait states
On reboot no state change can be determined from the API.
Thus we define the safe default and wait for the ReadyRole
even though the vm might already be in that state before
reboot
-------------------------------------------------------------------
Tue Mar 21 15:35:39 CET 2017 - sean.marlow@suse.de
- Fix mutable default values.
Default values should not contain mutable objects such as lists.
-------------------------------------------------------------------
Tue Mar 21 15:06:49 CET 2017 - sean.marlow@suse.de
- Remove result not used in tests.
-------------------------------------------------------------------
Tue Mar 21 14:47:40 CET 2017 - sean.marlow@suse.de
- Add azurectl compute vm start.
-------------------------------------------------------------------
Wed Mar 15 13:23:30 CET 2017 - ms@suse.de
- Added azurectl compute vm status
Allows to retrieve the current status of the virtual machine.
In addition the wait behavior was refactored to actually wait
for the vm command to complete. This means waiting for a specific
virtual machine status or status change
-------------------------------------------------------------------
Wed Mar 15 08:52:49 CET 2017 - jmason@suse.de
- Add --storage-container arg to global storager cmd
The argument '--storage-container' was not defined for the top-level
storage command, causing an error when using it.
Resolves https://github.com/SUSE/azurectl/issues/215
-------------------------------------------------------------------
Mon Mar 13 13:19:37 CET 2017 - sean.marlow@suse.de
- Update docs and docstrings to match correct order.
Order should be by CRUD and alpha.
In delete, show and update compare endpoint names case
insensitive.
-------------------------------------------------------------------
Fri Mar 10 15:07:42 CET 2017 - sean.marlow@suse.de
- Add update method to instance endpoint.
Add method and cli option to update an existing endpoint
on an instance. All args can be changed except the endpoint
name.
-------------------------------------------------------------------
Fri Mar 3 13:17:07 CET 2017 - jmason@suse.de
- Updating completion script; generated during build.
-------------------------------------------------------------------
Fri Mar 3 13:16:22 CET 2017 - jmason@suse.de
- Bump version: 2.3.0 → 2.3.1
-------------------------------------------------------------------
Fri Mar 3 12:31:26 CET 2017 - jmason@suse.de
- Remove redundant/conflicting README instructions
-------------------------------------------------------------------
Fri Mar 3 12:19:16 CET 2017 - jmason@suse.de
- Use absolute imports
Relative imports fail when imported from a different scope.
-------------------------------------------------------------------
Wed Mar 1 10:22:57 CET 2017 - jmason@suse.de
- Bump version: 2.2.6 → 2.3.0
-------------------------------------------------------------------
Fri Feb 17 09:36:41 CET 2017 - sean.marlow@suse.de
- Raise AzureEndpointDelete error instead of Exception.
And re-raise error. Use more verbose index name for enumeration.
-------------------------------------------------------------------
Thu Feb 16 15:21:04 CET 2017 - jmason@suse.de
- Add --blob-name argument to `compute data-disk attach`
-------------------------------------------------------------------
Thu Feb 16 14:39:52 CET 2017 - jmason@suse.de
- Create data-disks during attach, as necessary.
-------------------------------------------------------------------
Thu Feb 16 14:39:11 CET 2017 - jmason@suse.de
- Add an error for DataDisk Attach
-------------------------------------------------------------------
Thu Feb 16 13:50:07 CET 2017 - sean.marlow@suse.de
- Use block if statement.
Add test to cover list method with no endpoints.
-------------------------------------------------------------------
Thu Feb 16 12:52:23 CET 2017 - jmason@suse.de
- Refactor vhd extension stripping into a function
-------------------------------------------------------------------
Thu Feb 16 12:36:15 CET 2017 - sean.marlow@suse.de
- Fix methods if no endpoints.
Azure is returning a None type instead of an empty list if no
endpoints exist. Check for None in show and list method.
In create method create a new instance of endpoints list if
it is None for appending the new endpoint.
In delete return an error if the endpoint is not foud in the list
or if there are no endpoints.
In show endpoint method return from for loop.
If endpoint is found return from for loop. Otherwise if loop
finishes raise exception, endpoint not found.
-------------------------------------------------------------------
Tue Feb 14 15:15:05 CET 2017 - jmason@suse.de
- Delete single instance with delete_role
Each cloud-service created through azurectl has a single deployment which
defines the public network configuration for the cloud-service, including
a reserved-ip if desired.
Each instance (VM) is created with a role, which includes endpoint mapping
for the specific instance from the cloud-service.
A cloud-service with one instance has one deployment, and one role.
A cloud-service with N instances has one deployment, and N roles.
Therefore; deleting the deployment is an incorrect action when a single
instance is targeted for deletion; the instance's role should be deleted
instead.
See https://github.com/Azure/azure-sdk-for-python/blob/master/azure-servicemanagement-legacy/azure/servicemanagement/servicemanagementservice.py#L1599
-------------------------------------------------------------------
Mon Jan 30 16:13:05 CET 2017 - ms@suse.de
- Update help message for resource deallocation
Be more clear on what happens with the static ip address
on shutdown and the request to deallocate the used resources
-------------------------------------------------------------------
Mon Jan 30 11:57:24 CET 2017 - ms@suse.de
- Added compute vm shutdown command
Allows to shut down a virtual machine instance. Also taking
into account if the used resources should be deallocated or
not. This Fixes #200
-------------------------------------------------------------------
Thu Jan 19 09:40:55 CET 2017 - ms@suse.de
- Bump version: 2.2.5 → 2.2.6
-------------------------------------------------------------------
Wed Jan 18 12:49:48 CET 2017 - sean.marlow@suse.de
- Combine request status tests.
Test for Failure and confirm both failure
message and result exist in resulting dict.
-------------------------------------------------------------------
Wed Jan 18 12:01:24 CET 2017 - sean.marlow@suse.de
- Return disctionary status from request_status.
The get_operation_status command from azure SDK
is returning an Operation object not a string.
Return a dictionary with the result status plus
the error message if the request has failed.
-------------------------------------------------------------------
Wed Jan 11 10:16:35 CET 2017 - ms@suse.de
- retry operation status result on failure
If the operation status can't be retrieved, try again for
several times before raising an error. Fixes #199
-------------------------------------------------------------------
Thu Dec 15 10:20:41 CET 2016 - ms@suse.de
- Bump version: 2.2.4 → 2.2.5
-------------------------------------------------------------------
Wed Dec 14 18:43:10 CET 2016 - jmason@suse.de
- Adjust data-disk size for vhd footer
Fixes #197
-------------------------------------------------------------------
Wed Dec 14 17:42:44 CET 2016 - ms@suse.de
- Bump version: 2.2.3 → 2.2.4
-------------------------------------------------------------------
Mon Dec 12 21:25:38 CET 2016 - jmason@suse.de
- Remove unused arguments.
-------------------------------------------------------------------
Mon Dec 12 21:19:03 CET 2016 - jmason@suse.de
- Only upload vhd metadata on data-disk create
The only content in an empty Azure data-disk is the
fixed VHD footer, so instead of creating and reading
an arbitary-sized empty file, just upload the footer
data.
-------------------------------------------------------------------
Mon Oct 31 15:42:31 CET 2016 - ms@suse.de
- Bump version: 2.2.2 → 2.2.3
-------------------------------------------------------------------
Mon Oct 31 15:41:03 CET 2016 - ms@suse.de
- Tracker commit for bnc#1007751
Fixup non conforming data disk setup
-------------------------------------------------------------------
Mon Oct 31 15:32:03 CET 2016 - ms@suse.de
- Bump version: 2.2.1 → 2.2.2
-------------------------------------------------------------------
Mon Oct 31 11:46:13 CET 2016 - ms@suse.de
- Append VHD footer to the end of the disk
-------------------------------------------------------------------
Sun Oct 30 18:47:21 CET 2016 - ms@suse.de
- Fixup data disk creation
The data disk file must be of the specified size in sparse
containing the vhd metadata at the end of the disk. Azure
only supports fixed size VHD's
-------------------------------------------------------------------
Wed Oct 26 21:48:19 CEST 2016 - ms@suse.de
- Bump version: 2.2.0 → 2.2.1
-------------------------------------------------------------------
Wed Oct 26 18:00:22 CEST 2016 - ms@suse.de
- Add man information about default data disk size
-------------------------------------------------------------------
Fri Oct 21 10:42:28 CEST 2016 - ms@suse.de
- Update data-disk manual page
The man page for this command was not in line with the
current state of the command and its subcommands. This
Fixes #193
-------------------------------------------------------------------
Fri Oct 21 10:30:57 CEST 2016 - ms@suse.de
- Add missing data-disk attach subcomand help
-------------------------------------------------------------------
Fri Oct 14 10:39:53 CEST 2016 - ms@suse.de
- Update bash completion
On make build the bash completion is automatically updated
to the latest version. Thus it's not required to keep an
up to date version of the file in the git repo. However,
it also does not hurt and allows to make use of the latest
completion from within a development environment
-------------------------------------------------------------------
Thu Oct 13 17:00:12 CEST 2016 - cole.mickens@suse.de
- Bump version: 2.1.1 -> 2.2.0
-------------------------------------------------------------------
Tue Sep 20 17:02:25 CEST 2016 - cole.mickens@suse.de
- add --show-in-gui and --recommended-vm-size to compute image update + tests
-------------------------------------------------------------------
Tue Sep 20 14:28:06 CEST 2016 - cole.mickens@suse.de
- Document: storage disk upload skips zero'd blocks
-------------------------------------------------------------------
Fri Sep 16 09:06:42 CEST 2016 - ms@suse.de
- Bump version: 2.1.0 → 2.1.1
-------------------------------------------------------------------
Fri Sep 16 09:06:08 CEST 2016 - ms@suse.de
- Tracker commit for package update (bnc#999200)
-------------------------------------------------------------------
Fri Sep 16 09:05:06 CEST 2016 - ms@suse.de
- Rebuild bash completion
-------------------------------------------------------------------
Fri Sep 16 08:36:23 CEST 2016 - ms@suse.de
- Bump version: 2.0.7 → 2.1.0
-------------------------------------------------------------------
Thu Sep 15 19:58:17 CEST 2016 - jmason@suse.de
- Remove line breaks from manpage source.
-------------------------------------------------------------------
Wed Sep 14 15:25:30 CEST 2016 - ms@suse.de
- Fixup command order following CRUD
-------------------------------------------------------------------
Wed Sep 14 11:40:44 CEST 2016 - ms@suse.de
- Update reserved_ip manual page
Added information about reserved_ip associate and disassociate
commands
-------------------------------------------------------------------
Wed Sep 14 11:37:02 CEST 2016 - ms@suse.de
- Added compute reserved-ip associate/disassociate
-------------------------------------------------------------------
Wed Sep 14 11:20:04 CEST 2016 - ms@suse.de
- Added reserved_ip associate/disassociate methods
-------------------------------------------------------------------
Tue Sep 13 16:22:56 CEST 2016 - ms@suse.de
- Fixup unit tests
Some unit tests open a network connection and are not correctly patched
-------------------------------------------------------------------
Tue Sep 13 16:15:56 CEST 2016 - ms@suse.de
- Fixed setup.cfg
WC1 None [pytest] section in setup.cfg files is deprecated,
use [tool:pytest] instead.
-------------------------------------------------------------------
Tue Sep 13 16:04:26 CEST 2016 - ms@suse.de
- Update install-azure-sdk-from-git
Use dev branch by default
-------------------------------------------------------------------
Tue Sep 13 15:57:26 CEST 2016 - ms@suse.de
- Fixup version for future module in setup.py
The version of the future(s) module was accidentally used
-------------------------------------------------------------------
Tue Sep 6 18:45:04 CEST 2016 - jmason@suse.de
- Add to docs
-------------------------------------------------------------------
Tue Sep 6 18:31:02 CEST 2016 - jmason@suse.de
- Generate SAS URLs for disk images
-------------------------------------------------------------------
Tue Sep 6 16:44:00 CEST 2016 - jmason@suse.de
- Fix missing returns in validation shortcuts
-------------------------------------------------------------------
Tue Sep 6 16:40:06 CEST 2016 - jmason@suse.de
- Move date validation out to validation helper
-------------------------------------------------------------------
Tue Sep 6 16:18:52 CEST 2016 - jmason@suse.de
- Move SAS permission validation out to validations helper
-------------------------------------------------------------------
Fri Aug 26 16:27:32 CEST 2016 - ms@suse.de
- Provide disk name example in help and man page
-------------------------------------------------------------------
Fri Aug 26 16:24:05 CEST 2016 - ms@suse.de
- Move from --identifier to --disk-basename option
The new option name better describes the expected value
-------------------------------------------------------------------
Mon Aug 22 12:17:17 CEST 2016 - ms@suse.de
- Kudos to Steven Edouard
https://gist.github.com/sedouard, great gist for creating blank vhd's
-------------------------------------------------------------------
Mon Aug 22 12:12:51 CEST 2016 - ms@suse.de
- Add future to travis requirements
-------------------------------------------------------------------
Mon Aug 22 11:56:52 CEST 2016 - ms@suse.de
- Refactor compute data-disk create command
Really only create a data-disk and do not require an instance
Use the attach command to make the created disk available in
an instance
-------------------------------------------------------------------
Mon Aug 22 11:55:16 CEST 2016 - ms@suse.de
- Refactor data-disk create method
The command required an existing instance to create a data disk
It should be possible to create and register data disks without
immediately attaching them to a running instance. The workflow
should be data-disk create followed by data-disk attach
-------------------------------------------------------------------
Mon Aug 22 11:21:48 CEST 2016 - ms@suse.de
- Add python future requirement
future provides builtins.bytes support needed for creating
empty VHD disks of a custom size
-------------------------------------------------------------------
Wed Aug 17 13:27:05 CEST 2016 - jmason@suse.de
- Extend scope of documentation to explain how and where customdata ends up
-------------------------------------------------------------------
Wed Aug 17 11:27:31 CEST 2016 - ms@suse.de
- Update compute data-disk command
* add data-disk attach subcommand
attach an existing data disk to the selected virtual machine
-------------------------------------------------------------------
Tue Aug 16 18:01:16 CEST 2016 - ms@suse.de
- Added attach method to DataDisk class
Allows to attach an existing data disk to an instance
-------------------------------------------------------------------
Tue Aug 16 09:59:01 CEST 2016 - jmason@suse.de
- Accept string or file as customdata
-------------------------------------------------------------------
Tue Aug 16 08:28:23 CEST 2016 - jmason@suse.de
- MOAR UNDERSCORES
-------------------------------------------------------------------
Tue Aug 16 08:24:33 CEST 2016 - jmason@suse.de
- Fix a grammar error in docs
-------------------------------------------------------------------
Tue Aug 16 08:22:39 CEST 2016 - jmason@suse.de
- Simplify descriptions WRT base64-encoding of customdata
-------------------------------------------------------------------
Mon Aug 15 16:29:20 CEST 2016 - jmason@suse.de
- Fixup flake8 issue
-------------------------------------------------------------------
Mon Aug 15 16:01:30 CEST 2016 - jmason@suse.de
- Handle custom data via file or string on vm creation
re: https://github.com/SUSE/azurectl/issues/177
Also resolves an issue with double-encoding of customdata - the custom
data supplied _should not_ be base64-encoded; this is handled by the
API.
-------------------------------------------------------------------
Wed Aug 10 16:50:35 CEST 2016 - ms@suse.de
- Update manual page for data-disk command
-------------------------------------------------------------------
Wed Aug 10 16:30:58 CEST 2016 - ms@suse.de
- Update compute data-disk command
* add data-disk detach subcommand
detach a data disk from the selected virtual machine and
retain the data disk vhd file
* modify data-disk (delete | list | show) subcommands
Allow them to work without an instance specification
* add data-disk (list | show) attached subcommands
Former list and show commands connected to an instance
specification
-------------------------------------------------------------------
Wed Aug 10 15:55:48 CEST 2016 - ms@suse.de
- Refactor DataDisk class
* do not require explicit set_instance method. It should be
possible to construct an object of DataDisk without being
force to manually run a second initialization method
* change behaviour of show and list methods. Those actually
list or show information for attached disks. Thus those are
renamed to show_attached and list_attached. In addition
the former show and list methods now provides information
for all registered disks.
* change behaviour of delete to allow deletion of the specified
disk no matter if that disk is attached to an instance or not
* introduce a detach method which allows to detach a data disk
from an instance to set it free, for e.g deletion
* move default LUN numbers to the Defaults namespace
-------------------------------------------------------------------
Wed Aug 10 10:22:43 CEST 2016 - ms@suse.de
- Show error details from docopt if present
-------------------------------------------------------------------
Wed Aug 10 08:46:33 CEST 2016 - rjschwei@suse.de
- Clarify the format of the password argument for VM creation in the help
message
-------------------------------------------------------------------
Fri Jul 22 09:46:05 CEST 2016 - ms@suse.de
- Fixed OS image lookup in VirtualMachine
Before we start an instance a check is made if the provided image
is reachable by the cloud service. However if the image itself
does not (or not yet) exist azurectl runs into an unhandled
exception
-------------------------------------------------------------------
Thu Jul 21 09:46:28 CEST 2016 - ms@suse.de
- Update manual page for compute vm show
-------------------------------------------------------------------
Wed Jul 20 16:38:25 CEST 2016 - ms@suse.de
- Added compute vm show command
show detailed information about all virtual machines running
in the specified cloud service
-------------------------------------------------------------------
Wed Jul 20 16:37:21 CEST 2016 - ms@suse.de
- Added get_properties for cloud_service
Retrieves cloud service attributes and all details about
instances running in this cloud service
-------------------------------------------------------------------
Wed Jul 20 11:01:23 CEST 2016 - ms@suse.de
- Added --wait option for compute vm reboot
-------------------------------------------------------------------
Tue Jul 19 17:29:11 CEST 2016 - ms@suse.de
- Added documentation about compute vm reboot
-------------------------------------------------------------------
Tue Jul 19 17:25:46 CEST 2016 - ms@suse.de
- Added compute vm reboot command
-------------------------------------------------------------------
Tue Jul 19 17:15:31 CEST 2016 - ms@suse.de
- Added VirtualMachine reboot_instance method
-------------------------------------------------------------------
Thu Jul 14 17:36:24 CEST 2016 - ms@suse.de
- Update manual pages
Added --wait options, fixup various markup issues
-------------------------------------------------------------------
Thu Jul 14 17:14:13 CEST 2016 - ms@suse.de
- Added --wait option for async commands
Commands which comes back with a request id can be started
with the --wait option. This causes the command to block the
caller until the request status changes to a success state.
There are commands like replication which implements the
wait differently because the condition of success for the
request is not enough. What exactly the command is waiting
for needs to end up in the documentation
-------------------------------------------------------------------
Thu Jul 14 15:29:35 CEST 2016 - ms@suse.de
- Async commands are expected to return a request id
The storage account update command should return a request id
to allow for waiting like it is done with all other async
methods returning a request id
-------------------------------------------------------------------
Thu Jul 14 09:18:15 CEST 2016 - ms@suse.de
- Refactor use of RequestResult in CliTask's
Provide request_wait/request_status methods to be available
for any command class inheriting from CliTask and adapt
existing command implementations to make use of the methods
-------------------------------------------------------------------
Fri Jun 17 09:49:01 CEST 2016 - ms@suse.de
- Update README
Fix zypper command for package pre conditions
-------------------------------------------------------------------
Tue Jun 14 16:57:16 CEST 2016 - ms@suse.de
- Bump version: 2.0.6 → 2.0.7
-------------------------------------------------------------------
Tue Jun 14 16:57:06 CEST 2016 - ms@suse.de
- Fixed license setup in spec file
-------------------------------------------------------------------
Tue Jun 14 09:40:14 CEST 2016 - ms@suse.de
- Bump version: 2.0.5 → 2.0.6
-------------------------------------------------------------------
Mon Jun 13 21:13:44 CEST 2016 - ms@suse.de
- Better message for default config file conflict
If a default account configuration file from a former
azurectl version was found, an error message explaining
the possible options should be displayed
-------------------------------------------------------------------
Tue May 24 17:53:22 CEST 2016 - jmason@suse.de
- Bump version: 2.0.4 → 2.0.5
-------------------------------------------------------------------
Tue May 24 17:28:37 CEST 2016 - jmason@suse.de
- Use API lookup instead of DNS entry for cloud service check
-------------------------------------------------------------------
Tue May 24 16:56:35 CEST 2016 - jmason@suse.de
- Remove unnecessary blob service mapping
blob service name is always the management url, without the
'management.' prefix.
-------------------------------------------------------------------
Tue May 24 11:23:43 CEST 2016 - jmason@suse.de
- Bump version: 2.0.3 → 2.0.4
-------------------------------------------------------------------
Tue May 24 11:12:47 CEST 2016 - jmason@suse.de
- Add domain references for new UK regions
-------------------------------------------------------------------
Mon May 23 16:52:35 CEST 2016 - ms@suse.de
- Bump version: 2.0.2 → 2.0.3
-------------------------------------------------------------------
Mon May 23 16:38:26 CEST 2016 - ms@suse.de
- Fixed ReservedIp constructor
We don't need storage account information here, Fixes #166
-------------------------------------------------------------------
Wed May 18 09:23:40 CEST 2016 - jmason@suse.de
- Bump version: 2.0.1 → 2.0.2
-------------------------------------------------------------------
Wed May 18 09:23:28 CEST 2016 - jmason@suse.de
- Automated update of completion script
-------------------------------------------------------------------
Mon May 16 16:44:11 CEST 2016 - jmason@suse.de
- Always parse region name the same way (with the same method)
Config#__get_region_option() had its own implementation of choosing a region,
which conflicted with Config#get_region_name(), so we dump it and use
get_region_name() in both cases.
Resolves https://github.com/SUSE/azurectl/issues/160
-------------------------------------------------------------------
Thu May 12 09:10:15 CEST 2016 - jmason@suse.de
'storage disk delete' uses blob-name argument
resolves #163
-------------------------------------------------------------------
Mon May 9 10:40:29 CEST 2016 - ms@suse.de
- Better error message for storage/container config
The information for the storage account and container is connected
to a region section in the configuration file. This means if azurectl
needs to read for example the name of the default storage container
name configured for the default- or commandline provided region,
it has to first read the region section. If the region section
does not exist azurectl provides an error message to the user about
the missing region, however the user requested information about the
storage container and that could confuse users who do not know how
the configuration file is structured. This patch puts together the
complete set of information and forms a more clear error message
for all data read from a region section in the configuration file
-------------------------------------------------------------------
Sun May 8 19:44:06 CEST 2016 - ms@suse.de
- Fixup VirtualMachine and CloudService instances
The constructor requested information which is not always
needed depending on the called instance methods. Therefore
the class requests operational information like container
names, region name, etc only when needed but not directly
at instance creation time. Fixes #158
-------------------------------------------------------------------
Thu May 5 17:28:34 CEST 2016 - rjschwei@suse.de
- Add the --region global option to the account setup command sequence
for clarity
+ We should assume a user is starting from scratch and has no default
region in the configuration at this point
-------------------------------------------------------------------
Thu May 5 16:30:32 CEST 2016 - rjschwei@suse.de
- Add a tar target
+ The option will create a tarball that is suitable for local package
builds and does not require a complete functioning development
environment for azurectl. For releases the existing build target should
be used.
-------------------------------------------------------------------
Thu May 5 11:45:19 CEST 2016 - jmason@suse.de
- Allow a region argument to bypass the config file
There are specific cases where the region argument is valuable
in a function, but not essential to the configuration file.
An example is `storage account create`; it's necessary to define
the region where the storage account will be placed, but a _specific
storage account_ or a _specific container_ is not required (which is
what the config provides); only the name of the region.
In the event the region name is invalid, it will be reflected in an
error raised by the upstream API.
-------------------------------------------------------------------
Wed May 4 17:49:48 CEST 2016 - ms@suse.de
- Added missing setup account test
processing the account setup if no default configuration exists
was not tested
-------------------------------------------------------------------
Wed May 4 16:31:08 CEST 2016 - jmason@suse.de
- Bump version: 2.0.0 → 2.0.1
-------------------------------------------------------------------
Wed May 4 10:27:41 CEST 2016 - jmason@suse.de
- Deployment slot is global to the cloud service
... therefore added roles are in the same deployment slot, so add_role
doesn't accept this argument.
Since we don't offer an option to choose a role (yet), I moved it out of
the command code.
-------------------------------------------------------------------
Wed May 4 08:31:55 CEST 2016 - ms@suse.de
- Fixup role name on instance creation
role_name = instance_name
-------------------------------------------------------------------
Tue May 3 23:09:53 CEST 2016 - jmason@suse.de
- Properly reference deployments and roles in data-disk functions.
-------------------------------------------------------------------
Tue May 3 21:49:51 CEST 2016 - ms@suse.de
- Added check for reserved_ip on instance creation
Reserved IP name can only be assigned on initial deployment
-------------------------------------------------------------------
Tue May 3 21:35:47 CEST 2016 - ms@suse.de
- Delete create_reserved_ip_address handling
azurectl has an explicit reserved_ip command for this purpose
-------------------------------------------------------------------
Tue May 3 21:26:44 CEST 2016 - ms@suse.de
- Check error code from get_deployment_by_name
In case of an exception, check if the exception type is a
ResourceNotFound error. In any other case raise
-------------------------------------------------------------------
Tue May 3 17:29:09 CEST 2016 - jmason@suse.de
- Add missing argument to 'compute endpoint delete'
-------------------------------------------------------------------
Tue May 3 16:37:34 CEST 2016 - jmason@suse.de
- Properly reference deployments and roles in endpoint functions.
-------------------------------------------------------------------
Tue May 3 10:20:15 CEST 2016 - jmason@suse.de
- Remove deprecated 'compute storage' section from manpage
Commands have moved to 'storage disk' and 'storage container'
commands, which are already documented.
Resolves https://github.com/SUSE/azurectl/issues/149
-------------------------------------------------------------------
Tue May 3 09:03:02 CEST 2016 - ms@suse.de
- Wait for request to complete on reserved_ip setup
-------------------------------------------------------------------
Mon May 2 15:45:29 CEST 2016 - ms@suse.de
- Refactor check for deployment
-------------------------------------------------------------------
Sun May 1 21:50:39 CEST 2016 - ms@suse.de
- Make name argument mandatory for container create
If the container name is optional on create, it is taken from
the region section of the config file. However if the config
file does not contain a region section it is not possible to
create a container. This commit solves the chicken & egg
problem. Related to #124
-------------------------------------------------------------------
Sun May 1 21:26:27 CEST 2016 - ms@suse.de
- Update README
More detailed information about the account setup
Fixes #124
-------------------------------------------------------------------
Sun May 1 15:31:02 CEST 2016 - ms@suse.de
- Fixed deployment label setup on instance creation
A deployment label can be specified on initial deployment only
-------------------------------------------------------------------
Sun May 1 15:08:49 CEST 2016 - ms@suse.de
- Fixed reserved ip setup on instance creation
A reserved IP address name can be specified on initial deployment
and requires a create_reserved_ip_address call before. Additional
instances in the same deployment cannot be instanciated with a
reserved IP address name according to the current add_role
implementation. Related to #144
-------------------------------------------------------------------
Sun May 1 14:27:08 CEST 2016 - ms@suse.de
- Fixed instance creation if deployment exists
check if the virtual machine deployment already exists. If so
any new instance must be created as additional role to the
deployment. Only the initial virtual machine instance must
be created as a new deployment for the selected cloud service
Fixes #144
-------------------------------------------------------------------
Sat Apr 30 23:32:25 CEST 2016 - ms@suse.de
- Update README
Information how to build rpm package
-------------------------------------------------------------------
Sat Apr 30 23:19:17 CEST 2016 - ms@suse.de
- Configuration file compatibility
prior to this release azurectl allowed multiple account
sections in one config file. In order to prevent the
configuration of duplicate and potentially inconsistent
account configurations this patch checks the account
sections of an existing default config file for conflicts
Fixes #138
-------------------------------------------------------------------
Fri Apr 29 18:59:38 CEST 2016 - ms@suse.de
- Not all operations requires a region setup
Follow up fix for 'azurectl --region <name> compute image list'
This operation doesn't require storage information from the
region. If the region name is given this is enough. Fixes #140
-------------------------------------------------------------------
Fri Apr 29 18:23:26 CEST 2016 - ms@suse.de
- Provide subcommand help as usage information
Fixes #139
-------------------------------------------------------------------
Fri Apr 29 17:01:31 CEST 2016 - ms@suse.de
- Update usage information for global options
Depending on the selected service different global options
are available. This patch categorizes the global option
information to be specific for the selected service.
Fixes #137
-------------------------------------------------------------------
Fri Apr 29 11:17:16 CEST 2016 - ms@suse.de
- Not all operations requires a region setup
azurectl operations like 'storage account list' or 'compute vm types'
as well as 'compute vm regions' do not require a region setup in the
configuration file. In addition we allow to setup the account with
the region setup to be optional but the code always reads in a default
region setup. Therefore this commit changes the behaviour to read
the region setup only when required and allows for operations without
a region setup. This is related to Issue #124
-------------------------------------------------------------------
Fri Apr 29 10:55:49 CEST 2016 - ms@suse.de
- Fixed typo loction -> location
-------------------------------------------------------------------
Thu Apr 28 17:27:12 CEST 2016 - ms@suse.de
- Bump version: 1.8.1 → 2.0.0
-------------------------------------------------------------------
Thu Apr 28 10:05:29 CEST 2016 - ms@suse.de
- Prevent double render on usage
-------------------------------------------------------------------
Wed Apr 27 20:06:20 CEST 2016 - jmason@suse.de
- Add some scope to the docopts
Use the brief descriptions of function scope, WRT Azure, with
the docopts as well.
Inspired by Robert's request for an explanation of the endpoint
commands.
-------------------------------------------------------------------
Wed Apr 27 20:04:31 CEST 2016 - jmason@suse.de
- Fix up manpages
* Reorder commands and options in manpages to agree with docopts.
* Add missing commands/options in manpages and docopts.
* Add brief descriptions to manpages explaining the scope of
functionality within the Azure framework
-------------------------------------------------------------------
Wed Apr 27 18:39:26 CEST 2016 - jmason@suse.de
- Add missing sections to the root manpage
-------------------------------------------------------------------
Wed Apr 27 11:35:36 CEST 2016 - ms@suse.de
- Fixed completion generator
-------------------------------------------------------------------
Wed Apr 27 11:10:32 CEST 2016 - jmason@suse.de
- Sort subcommands based on the sorting rules.
-------------------------------------------------------------------
Wed Apr 27 10:34:48 CEST 2016 - jmason@suse.de
- Add subcommand sorting rules to README.
-------------------------------------------------------------------
Wed Apr 27 09:36:41 CEST 2016 - ms@suse.de
- Fixed docopt setup for compute image update
Options for the image update command were not part of
the usage help
-------------------------------------------------------------------
Wed Apr 27 09:14:59 CEST 2016 - ms@suse.de
- Fixed docopt setup for compute image --name
Be more consistent what --name is used for in the compute
image command
-------------------------------------------------------------------
Wed Apr 27 09:10:43 CEST 2016 - ms@suse.de
- Fixed docopt setup for compute image --label
Be more clear and consistent in the docopt specification
for the --label option in the compute image command
-------------------------------------------------------------------
Wed Apr 27 08:37:00 CEST 2016 - jmason@suse.de
- Add an example date format, consistent with other date fields
-------------------------------------------------------------------
Tue Apr 26 18:00:37 CEST 2016 - jmason@suse.de
- Add a description for 'compute endpoint'
-------------------------------------------------------------------
Tue Apr 26 17:34:23 CEST 2016 - jmason@suse.de
- change --blob arg of 'compute image create' to --blob-name
-------------------------------------------------------------------
Tue Apr 26 17:29:32 CEST 2016 - jmason@suse.de
- change --name arg of 'storage disk upload' to --blob-name
-------------------------------------------------------------------
Tue Apr 26 17:18:39 CEST 2016 - jmason@suse.de
- Add details on 'container sas' subcommand
-------------------------------------------------------------------
Tue Apr 26 17:07:02 CEST 2016 - ms@suse.de
- Provide custom usage message
Instead of the docopt way to show the usage information we
provide an azurectl specific usage information. The usage
data now always consists of
* the generic call
azurectl [global options] service <command> [<args>]
* the command specific usage defined by the docopt string
short form by default, long form with -h | --help
* the global options
-------------------------------------------------------------------
Tue Apr 26 16:25:35 CEST 2016 - jmason@suse.de
- Sort commands and options in docopts alphabetically
-------------------------------------------------------------------
Tue Apr 26 15:54:29 CEST 2016 - jmason@suse.de
- Add a date format example
-------------------------------------------------------------------
Tue Apr 26 12:46:32 CEST 2016 - jmason@suse.de
- request commands were using a deprecated internal interface.
-------------------------------------------------------------------
Mon Apr 18 22:46:40 CEST 2016 - jmason@suse.de
- Use azurectl with a management cert instead of publishsettings
A management cert allows the user to define the certificate used for API
authentication, instead of one generated by Azure (which is included in the
publishsettings file). Since no publishsettings file is available, the other
data normally supplied must be explicitly set in the config as well.
-------------------------------------------------------------------
Wed Apr 13 09:02:24 CEST 2016 - ms@suse.de
- Update README
Update developer documentation for changed API
-------------------------------------------------------------------
Wed Apr 13 08:48:04 CEST 2016 - ms@suse.de
- Update README
azurectl caller semantic has changed
-------------------------------------------------------------------
Tue Apr 12 20:38:52 CEST 2016 - jmason@suse.de
- Remove references to publishsettings in Classes
+ Consolidate cert file construction and service instantiation in
account
+ ServiceManager is no longer of value
+ ServiceManager-dependent classes are moved appropriately
-------------------------------------------------------------------
Tue Apr 12 14:26:42 CEST 2016 - ms@suse.de
- Move compute storage commands to storage service
The subcommands from the compute storage task has been moved
to the storage service. The following new commands exists
* storage container
list, show, create, delete, sas containers
* storage share
list, create, delete file shares
* storage disk
upload, delete, blob data, preferably vhd disks
References:
https://trello.com/c/vQ8nMkW3/138-azurectl-move-compute-storage
-------------------------------------------------------------------
Tue Apr 12 14:25:37 CEST 2016 - ms@suse.de
- Update documentation for storage commands
The compute storage commands has been moved into the storage
namespace. Thus the manual pages needs to follow the change
-------------------------------------------------------------------
Tue Apr 12 14:06:10 CEST 2016 - jmason@suse.de
- Add management_url account config attribute
... which precedes publishsettings options
-------------------------------------------------------------------
Tue Apr 12 11:07:55 CEST 2016 - jmason@suse.de
- mv StorageAccount to storage.account module
-------------------------------------------------------------------
Fri Apr 8 11:41:57 CEST 2016 - ms@suse.de
- Better user experience on command invocation
If a command plugin can not be found show a list of possible
actions for the selected service
-------------------------------------------------------------------
Fri Apr 8 10:49:53 CEST 2016 - ms@suse.de
- Use one source tarball
Don't manage completion and man pages in extra source
tarballs. The information has been placed into the
MANIFEST.in configuration
-------------------------------------------------------------------
Fri Apr 8 01:22:50 CEST 2016 - ms@suse.de
- Adapt completion generator
Only read source files with docopt information
-------------------------------------------------------------------
Fri Apr 8 01:19:24 CEST 2016 - ms@suse.de
- Added MANIFEST.in to describe package sources
-------------------------------------------------------------------
Fri Apr 8 01:06:21 CEST 2016 - ms@suse.de
- Refactor management into sub package
management/service_manager.py
management/endpoint.py
management/reserved_ip.py
management/request_result.py
management/data_disk.py
-------------------------------------------------------------------
Fri Apr 8 00:42:38 CEST 2016 - ms@suse.de
- Refactor storage into sub package
storage/page_blob.py
storage/container.py
storage/storage.py
-------------------------------------------------------------------
Fri Apr 8 00:32:01 CEST 2016 - ms@suse.de
- Refactor instance into sub package
instance/image.py
instance/cloud_service.py
instance/virtual_machine.py
-------------------------------------------------------------------
Fri Apr 8 00:18:51 CEST 2016 - ms@suse.de
- Refactor config into sub package
config/parser.py
config/file_path.py
-------------------------------------------------------------------
Thu Apr 7 23:59:05 CEST 2016 - ms@suse.de
- Refactor accounts into sub package
account/setup.py
account/service.py
account/storage.py
-------------------------------------------------------------------
Thu Apr 7 23:06:07 CEST 2016 - ms@suse.de
- Refactor commands into sub package
commands/base.py
commands/compute_data_disk.py
commands/compute_endpoint.py
commands/compute_image.py
commands/compute_request.py
commands/compute_reserved_ip.py
commands/compute_shell.py
commands/compute_storage.py
commands/compute_vm.py
commands/setup_account.py
commands/storage_account.py
-------------------------------------------------------------------
Thu Apr 7 14:54:35 CEST 2016 - ms@suse.de
- Refactor utils into sub package
utils/collector.py
utils/output.py
utils/filetype.py
utils/validations.py
utils/xz.py
-------------------------------------------------------------------
Wed Apr 6 10:41:36 CEST 2016 - ms@suse.de
- Complete deletion of account configuration
If an account configuration was deleted which was also setup as
the default configuration, the call left with a broken symlink.
This is not a problem for azurectl but should be avoided
-------------------------------------------------------------------
Wed Apr 6 09:47:08 CEST 2016 - ms@suse.de
- Don't fail account configuration if storage exists
-------------------------------------------------------------------
Wed Apr 6 08:58:53 CEST 2016 - ms@suse.de
- Update compute storage man page
Added missing/changed information about upload options
-------------------------------------------------------------------
Tue Apr 5 16:17:39 CEST 2016 - ms@suse.de
- Refactor ServiceManager base class
Any class using ServiceManager as base class requires the presence
of a storage account because the constructor of the base class
always reads the storage key and name. However the assumption
that every azure service management pointer provides access to
a storage account is not necessarily true
-------------------------------------------------------------------
Tue Apr 5 16:09:56 CEST 2016 - jmason@suse.de
- Make blobname arg optional on `compute storage upload`
It's common to use the source filename as the blob filename, and
Storage#upload already handled that behavior, but it didn't account for how
compressed files are handled automatically.
+ Make the argument optional in the command line
+ Properly adjust the filename of compressed files
-------------------------------------------------------------------
Tue Apr 5 15:22:31 CEST 2016 - jmason@suse.de
- Add domain suffixes for new Canadian regions
-------------------------------------------------------------------
Mon Apr 4 17:04:39 CEST 2016 - ms@suse.de
- Update manual page
Information about --create option for account configuration
-------------------------------------------------------------------
Mon Apr 4 16:59:53 CEST 2016 - ms@suse.de
- Allow storage/container creation for account setup
When configuring a new account setup an optional --create
parameter exists which will create the provided storage
account and the container as part of the azurectl account
configuration
References: https://trello.com/c/q09teezP/122-azurectl-better-initial-experience
-------------------------------------------------------------------
Fri Apr 1 20:16:57 CEST 2016 - ms@suse.de
- Fixed azure module names
Use the module names a pip search returns results for
-------------------------------------------------------------------
Fri Apr 1 11:35:13 CEST 2016 - jmason@suse.de
- Flake8 fixes
-------------------------------------------------------------------
Fri Apr 1 11:28:52 CEST 2016 - jmason@suse.de
- When waiting for replication to complete, show a progress bar...
... or be --quiet.
-------------------------------------------------------------------
Fri Apr 1 10:59:59 CEST 2016 - ms@suse.de
- Allow setup of custom Azure SDK in virtualenv
If the pip version of the Azure SDK and the Azure Storage SDK
is not suitable for the development tasks we have to manually
install the code from git into the virtualenv in order to allow
azurectl to make use of this SDK version. This commit adds the
helper script .virtualenv.install-azure-sdk which pulls the
SUSE SDK fork to the local development tree.
-------------------------------------------------------------------
Thu Mar 31 20:31:37 CEST 2016 - jmason@suse.de
- Add argument to wait for replication to complete
re: https://github.com/SUSE/azurectl/issues/89
-------------------------------------------------------------------
Thu Mar 31 17:22:54 CEST 2016 - jmason@suse.de
- Add a command to show image replication status
re: https://github.com/SUSE/azurectl/issues/89
-------------------------------------------------------------------
Thu Mar 31 15:09:57 CEST 2016 - ms@suse.de
- Update README
According to the changed setup account behaviour the documentation
needs to be adapted too
-------------------------------------------------------------------
Thu Mar 31 14:55:46 CEST 2016 - ms@suse.de
- Man page update
Style fixes
-------------------------------------------------------------------
Wed Mar 30 22:37:19 CEST 2016 - ms@suse.de
- Update man page for setup account default
-------------------------------------------------------------------
Wed Mar 30 22:30:31 CEST 2016 - ms@suse.de
- Refactor account setup default command
Instead of making an account section the default a symlink to the
specified account configuration file is created
References: https://trello.com/c/q09teezP/122-azurectl-better-initial-experience
-------------------------------------------------------------------
Wed Mar 30 17:33:30 CEST 2016 - ms@suse.de
- Delete setup account add command
Combine this command with the configure command
-------------------------------------------------------------------
Wed Mar 30 12:41:13 CEST 2016 - ms@suse.de
- Refactor account setup list command
Instead of listing only the information for the default account
the command now lists all configuration files and their setup.
In addition an information which config file is used by default
is part of the output
References: https://trello.com/c/q09teezP/122-azurectl-better-initial-experience
-------------------------------------------------------------------
Tue Mar 29 20:01:54 CEST 2016 - ms@suse.de
- Update documentation
Man page update for changed setup account command
-------------------------------------------------------------------
Tue Mar 29 19:50:49 CEST 2016 - ms@suse.de
- Refactor account setup command
Instead of managing several accounts in one config file, each
account is represented by its own config file. Support for
account config files were already in place but the account
setup command did not manage accounts as single files. This
commit changes the behaviour as follows:
setup account add/configure
creates a new account configuration file and does not add
sections to the existing configuration file
setup account remove
removes the account configuration file and not the
section reference in an existing configuration file
References: https://trello.com/c/q09teezP/122-azurectl-better-initial-experience
-------------------------------------------------------------------
Tue Mar 29 12:40:14 CEST 2016 - ms@suse.de
- Refactor loading of config file
Instead of loading the config file any time a class inherits
from CliTask just provide the load_config capability and
let any task explicitly load the config file when required.
In addition the load_config method creates a new default
config file if no config file existed and the user requested
the automatic configuration file setup on the commandline
References: https://trello.com/c/q09teezP/122-azurectl-better-initial-experience
-------------------------------------------------------------------
Tue Mar 29 07:35:54 CEST 2016 - jmason@suse.de
- Add command to list storage account regions
-------------------------------------------------------------------
Mon Mar 28 21:31:50 CEST 2016 - jmason@suse.de
- Add a command for listing regions for starting a VM
-------------------------------------------------------------------
Mon Mar 28 20:54:04 CEST 2016 - jmason@suse.de
- Make `compute shell` command a bit more convenient
-------------------------------------------------------------------
Mon Mar 28 14:17:26 CEST 2016 - jmason@suse.de
- Add commands for managing VM endpoints
-------------------------------------------------------------------
Thu Mar 24 10:18:51 CET 2016 - jmason@suse.de
- Update pre-commit hook for flake8
-------------------------------------------------------------------
Thu Mar 24 10:16:15 CET 2016 - jmason@suse.de
- Add additional development dependencies to README
-------------------------------------------------------------------
Fri Mar 18 14:47:03 CET 2016 - ms@suse.de
- Update and document virtualenv setup
Along with the virtualenv setup the bin/azurectl entry
point is no longer required. We get that for free
-------------------------------------------------------------------
Fri Mar 18 14:15:58 CET 2016 - ms@suse.de
- Update documentation
Refer to flake8 which covers the whole stack of conventions
-------------------------------------------------------------------
Fri Mar 18 11:54:37 CET 2016 - ms@suse.de
- Cleanup storage account commands
listing storage accounts is part of the azurectl storage
command. The compute storage subcommand and its help has been
deleted
In addition the missing 'compute storage share help' command
was added. The manual page existed but there was no way to call
the help from azurectl itself
-------------------------------------------------------------------
Tue Mar 15 13:58:08 CET 2016 - toms@suse.de
- Prepare Python virtual environment
* Use two requirement files for development and normal
* Add comment in setup.py's install_requires key
-------------------------------------------------------------------
Tue Mar 15 13:22:15 CET 2016 - toms@suse.de
- Ignore .env/ directory
-------------------------------------------------------------------
Tue Mar 15 12:34:19 CET 2016 - ms@suse.de
- Fixed exclude syntax for flake8
-------------------------------------------------------------------
Tue Mar 15 12:32:08 CET 2016 - ms@suse.de
- No flake8 on travis for the azure storage sdk
-------------------------------------------------------------------
Tue Mar 15 12:30:40 CET 2016 - ms@suse.de
- No flake8 on travis for the azure sdk
-------------------------------------------------------------------
Tue Mar 15 12:07:20 CET 2016 - ms@suse.de
- Cleanup code according to flake8 checks
-------------------------------------------------------------------
Tue Mar 15 11:12:46 CET 2016 - ms@suse.de
- Switch to flake8 checks
flake8 is more accurate and precise in checking the code for
e.g unused imports, unused variables and more
-------------------------------------------------------------------
Tue Mar 15 11:02:06 CET 2016 - ms@suse.de
- Move data_disk unit tests to pytest
-------------------------------------------------------------------
Tue Mar 15 10:59:48 CET 2016 - toms@suse.de
- Set x-Bit and add she-bang line
-------------------------------------------------------------------
Tue Mar 15 10:53:30 CET 2016 - toms@suse.de
- Improve setup.cfg with pytest and other settings
- Remove obsolete section nosetest (migrated to pytest)
- Add section bdist_wheel for wheels support
- Add section sdist to create tar.gz archive by default
-------------------------------------------------------------------
Tue Mar 15 10:22:23 CET 2016 - toms@suse.de
- Restore .bumpversion.cfg and setup.cfg
Seems setup.cfg was overwritten by .bumpversion.cfg accidently.
Restored setup.cfg from commit e0d09e7e019
-------------------------------------------------------------------
Mon Mar 14 18:43:10 CET 2016 - jmason@suse.de
- Privatize some methods
re: https://github.com/SUSE/azurectl/pull/105#discussion_r55975836
-------------------------------------------------------------------
Mon Mar 14 18:36:09 CET 2016 - jmason@suse.de
- Use upstream method for constructing blob URLs
re: https://github.com/SUSE/azurectl/pull/105#discussion_r55976239
-------------------------------------------------------------------
Mon Mar 14 12:06:37 CET 2016 - ms@suse.de
- Update travis setup for pytest
-------------------------------------------------------------------
Mon Mar 14 11:42:23 CET 2016 - ms@suse.de
- Move from nose to pytest
nose is no longer maintained, thus we have to move to another
testing system in the long run. This commit updates the make
setup to use pytest instead of nose. However all tests needs
to be migrated to pytest now and no longer use nose/tools
Fixes #102
-------------------------------------------------------------------
Sun Mar 13 15:31:46 CET 2016 - ms@suse.de
- patch version bump
-------------------------------------------------------------------
Sun Mar 13 15:27:38 CET 2016 - ms@suse.de
- Fixed upload performance issues
Revert back to our page uploader and adapt the code to use
the pageblobservice code from the latest azure storage sdk
-------------------------------------------------------------------
Sun Mar 13 15:26:42 CET 2016 - ms@suse.de
- Delete custom coverage check
Use --cover-min-percentage=100 from testing framework
-------------------------------------------------------------------
Fri Mar 11 20:17:11 CET 2016 - jmason@suse.de
- Add command to list data disks on a VM
-------------------------------------------------------------------
Fri Mar 11 19:39:06 CET 2016 - jmason@suse.de
- Add command for deleting a data disk from a VM.
-------------------------------------------------------------------
Fri Mar 11 18:54:47 CET 2016 - jmason@suse.de
- Add command for showing a data disk
-------------------------------------------------------------------
Fri Mar 11 16:59:26 CET 2016 - jmason@suse.de
- Bump version: 1.8.0 → 1.8.1
-------------------------------------------------------------------
Fri Mar 11 16:57:21 CET 2016 - jmason@suse.de
- Add bumpversion config
-------------------------------------------------------------------
Fri Mar 11 09:42:28 CET 2016 - ms@suse.de
- Prevent real HTTP connection in unit test
storage_account_test::test_update_error did not mock
get_storage_account_properties which causes a real network
connection in the test
-------------------------------------------------------------------
Thu Mar 10 15:38:36 CET 2016 - ms@suse.de
- Create a uniq disk identifier on vm create
When instantiating a new VM, we create a disk file with the
name '_instance', in the selected storage container. Since
storage files have unique names an additional information
is required to allow creation of multiple vm's from the same image
in a selected region and container. The naming schema is as
follows
<cloud-service-name>_instance_<instance-name>_image_<image-name>
This fixes #99
-------------------------------------------------------------------
Thu Mar 10 13:54:57 CET 2016 - jmason@suse.de
- Add test coverage of alternative Container init scenarios
-------------------------------------------------------------------
Thu Mar 10 11:55:29 CET 2016 - jmason@suse.de
- proposed solution to calling Container from StorageAccount
-------------------------------------------------------------------
Thu Mar 10 11:53:12 CET 2016 - jmason@suse.de
- Break an overly long line
re: https://github.com/SUSE/azurectl/pull/97#discussion_r55652223
-------------------------------------------------------------------
Wed Mar 9 09:00:59 CET 2016 - jmason@suse.de
- Alphabetize azurectl exceptions
-------------------------------------------------------------------
Wed Mar 9 08:02:55 CET 2016 - jmason@suse.de
- Inline a large string with dedent instead of breaking indent
re: https://github.com/SUSE/azurectl/pull/98#discussion_r55486058
-------------------------------------------------------------------
Wed Mar 9 07:59:12 CET 2016 - jmason@suse.de
- Add command for creating a data disk
re: https://github.com/SUSE/azurectl/issues/103
-------------------------------------------------------------------
Tue Mar 8 10:40:51 CET 2016 - jmason@suse.de
- Rename AsmObject to ServiceManager
re: https://github.com/SUSE/azurectl/pull/97#discussion_r55359763
-------------------------------------------------------------------
Tue Mar 8 10:28:35 CET 2016 - jmason@suse.de
- Add `compute shell` command -> drops to interactive python
-------------------------------------------------------------------
Fri Mar 4 10:43:39 CET 2016 - ms@suse.de
- Update man page due to updated container options
-------------------------------------------------------------------
Fri Mar 4 10:32:34 CET 2016 - ms@suse.de
- Update option handling for container operations
* container show should have the option to specify a container name.
* container create should have the container name as option and not
as a mandatory information. If not provided the configured container
name is used.
* container delete should have the container name as mandatory option
to let people think before they delete a container and its contents
-------------------------------------------------------------------
Fri Mar 4 09:41:10 CET 2016 - ms@suse.de
- minor version bump
-------------------------------------------------------------------
Fri Mar 4 09:39:50 CET 2016 - ms@suse.de
- Update spec template
azurectl has to require the latest version of the
azure-storage SDK to support the advanced blob
operations
-------------------------------------------------------------------
Thu Mar 3 17:45:37 CET 2016 - ms@suse.de
- Update storage code to match azure storage 0.30.0
-------------------------------------------------------------------
Thu Mar 3 14:02:08 CET 2016 - ms@suse.de
- Added compute storage container create|delete
Allows creation and deletion of containers for the
configured storage account
-------------------------------------------------------------------
Tue Mar 1 13:51:14 CET 2016 - jmason@suse.de
- Cleanup stdout printing in tests
-------------------------------------------------------------------
Fri Feb 26 19:41:56 CET 2016 - jmason@suse.de
- Add commands for CRUD of storage accounts
TODO: add tests
-------------------------------------------------------------------
Fri Feb 26 19:40:00 CET 2016 - jmason@suse.de
- Add some general docopt validations
-------------------------------------------------------------------
Tue Feb 23 10:17:31 CET 2016 - jmason@suse.de
- Refactor 'reserved_ip' command to 'reserved-ip'
... for consistency with other arguments; rework dynamic loaders
to better handle multi-word commands.
-------------------------------------------------------------------
Tue Feb 23 09:22:47 CET 2016 - jmason@suse.de
- Instead of importing , add local camelize method.
-------------------------------------------------------------------
Sun Feb 21 11:37:52 CET 2016 - jmason@suse.de
- semantic version bump
-------------------------------------------------------------------
Sat Feb 20 20:55:20 CET 2016 - jmason@suse.de
- Add reserved_ip support to creation of VMs.
-------------------------------------------------------------------
Sat Feb 20 20:29:45 CET 2016 - jmason@suse.de
- Add manpage for 'reserved_ip' command space.
-------------------------------------------------------------------
Sat Feb 20 19:41:08 CET 2016 - jmason@suse.de
- add 'reserved_ip delete' command
-------------------------------------------------------------------
Sat Feb 20 11:53:38 CET 2016 - jmason@suse.de
- add 'reserved_ip create' command
-------------------------------------------------------------------
Fri Feb 19 20:45:03 CET 2016 - jmason@suse.de
- Add 'reserved_ip show' command
-------------------------------------------------------------------
Fri Feb 19 19:59:19 CET 2016 - jmason@suse.de
- Use an inflection to find task class instead of title()
-------------------------------------------------------------------
Fri Feb 19 19:05:20 CET 2016 - jmason@suse.de
- Foundations: list reserved ips
-------------------------------------------------------------------
Thu Feb 18 20:49:07 CET 2016 - jmason@suse.de
- semantic version bump
-------------------------------------------------------------------
Thu Feb 18 20:48:11 CET 2016 - jmason@suse.de
- Bug in errormsg for VM domains
-------------------------------------------------------------------
Thu Feb 18 20:47:41 CET 2016 - jmason@suse.de
- Add VM domains for disconnected regions
-------------------------------------------------------------------
Thu Feb 18 17:38:57 CET 2016 - ms@suse.de
- Fixed doc/man Makefile
Fail if one of the used tools to build the docs is not installed
or throws an error
-------------------------------------------------------------------
Thu Feb 18 07:30:00 CET 2016 - jmason@suse.de
- Indentation changes per review comments.
-------------------------------------------------------------------
Wed Feb 17 20:40:57 CET 2016 - jmason@suse.de
- semantic version update
-------------------------------------------------------------------
Wed Feb 17 20:38:48 CET 2016 - jmason@suse.de
- Blob storage in disconnected regions
Define the 'host_base' for different azure disconnected regions;
derive it from the management url, and pass it along.
This enables working with blob storage in disconnect regions.
-------------------------------------------------------------------
Wed Feb 17 18:50:30 CET 2016 - jmason@suse.de
- Use management URL from publishsettings
Instead of defaulting to the standard management URL, explicitly send the
management URL defined in publishsettings.
This enables access to additional endpoints for detached regions.
-------------------------------------------------------------------
Fri Feb 12 11:16:06 CET 2016 - ms@suse.de
- Added python-azure-sdk-storage package requirement
Our Azure SDK package has been split into service and storage
management. Therefore azurectl has to require both packages
-------------------------------------------------------------------
Thu Feb 4 11:30:22 CET 2016 - ms@suse.de
- Added tests for PageBlob class
-------------------------------------------------------------------
Thu Feb 4 10:54:30 CET 2016 - ms@suse.de
- Update Storage class tests
Due to storage upload refactoring the tests needs to follow
-------------------------------------------------------------------
Thu Feb 4 10:53:34 CET 2016 - ms@suse.de
- Complete tests for XZ class
-------------------------------------------------------------------
Thu Feb 4 09:49:10 CET 2016 - ms@suse.de
- Refactor storage upload method
Instead of a set of nested while loops a new iterator class
called PageBlob has been introduced. This allows to encapsulate
the details of a page update in a blob storage and also
separates them from the actual upload code
-------------------------------------------------------------------
Tue Feb 2 17:38:55 CET 2016 - jmason@suse.de
- Semantic minor version bump
-------------------------------------------------------------------
Tue Feb 2 17:36:21 CET 2016 - ms@suse.de
- Update spec template to require azure sdk >= 1.0.3
-------------------------------------------------------------------
Tue Feb 2 17:36:18 CET 2016 - jmason@suse.de
- Allow image upload to retry a block upload multiple times
Instead of dying when we have a failure on a single block upload, try more than
once. Number of times to try can be passed into the upload function as an
argument, so we could, in theory, extend docopt to make this configurable.
-------------------------------------------------------------------
Fri Jan 22 10:15:18 CET 2016 - ms@suse.de
- Make decorator methods real private
-------------------------------------------------------------------
Fri Jan 22 10:12:07 CET 2016 - ms@suse.de
- Allow custom date formats
Instead of forcing the user to a specific date format, it is
now possible to pass in any format supported by python's date
parser.
-------------------------------------------------------------------
Fri Jan 22 08:35:03 CET 2016 - ms@suse.de
- Update os image test data to more realistic values
-------------------------------------------------------------------
Thu Jan 21 10:49:47 CET 2016 - ms@suse.de
- Added date and time format check
Make sure any data/time attributes in an os update call uses
the Azure API date and time format. Fixes #87
-------------------------------------------------------------------
Thu Jan 21 09:07:18 CET 2016 - ms@suse.de
- Fixed check for URI based OS image attributes
After an update of e.g privacy_uri the API might have changed
the value to be still correct but different from the original
value provided on the commandline by e.g a slash (/).
Fixes #86
-------------------------------------------------------------------
Mon Jan 18 10:10:55 CET 2016 - ms@suse.de
- Updated unit tests to make travis happy again
Travis has changed their pep8 default setup to be more strict.
The tests failed if a comparison for a bool value is not done
via 'if cond is True:' or 'if cond:'. In azurectl we have used
the '==' operator to do the compare.
- Updated unit tests to make travis happy again
Travis has changed their pep8 default setup to be more strict.
The tests failed if a comparison for a bool value is not done
via 'if cond is True:' or 'if cond:'. In azurectl we have used
the '==' operator to do the compare.
-------------------------------------------------------------------
Fri Jan 15 21:34:56 CET 2016 - jmason@suse.de
- Add command for listing a single image, by name.
-------------------------------------------------------------------
Tue Dec 22 09:26:53 CET 2015 - ms@suse.de
- Update travis SDK branch to master
update_os_image_from_image_reference was merged by Microsoft
into the SDK master branch. Therefore the travis checks are
back on master
-------------------------------------------------------------------
Fri Dec 11 15:12:32 CET 2015 - ms@suse.de
- Update spec file
make sure to reference the correct SDK version
-------------------------------------------------------------------
Fri Dec 11 14:36:33 CET 2015 - ms@suse.de
- minor version bump
Support for updating OS image data has been added
-------------------------------------------------------------------
Fri Dec 11 14:36:05 CET 2015 - ms@suse.de
- Add missing setuptools dependency to setup.py
-------------------------------------------------------------------
Tue Dec 1 10:01:00 CET 2015 - ms@suse.de
- Update manual page
man page data for azurectl compute image update
-------------------------------------------------------------------
Tue Nov 24 14:45:05 CET 2015 - jmason@suse.de
- Add missing dependency
-------------------------------------------------------------------
Tue Nov 24 10:42:21 CET 2015 - ms@suse.de
- Added support for replicating to all regions
The option --regions supports the value 'all', this Fixes #77
-------------------------------------------------------------------
Mon Nov 23 18:30:20 CET 2015 - ms@suse.de
- Added azurectl compute image update
Allow to update OS image metadata, also check if updated
data was really set. This Fixes #76
-------------------------------------------------------------------
Wed Nov 11 16:08:08 CET 2015 - ms@suse.de
- minor version bump
Azure SDK has our replication/publishing patches in a
a different namespace. Thus this version and the dependency
to the python-azure-sdk version were adapted
-------------------------------------------------------------------
Tue Nov 10 17:19:44 CET 2015 - ms@suse.de
- update version requirement for legacy service
-------------------------------------------------------------------
Wed Nov 4 10:10:17 CET 2015 - ms@suse.de
- Update module dependencies strictness
Instead of requiring an exact version we opened this to
match the major version and its releases. This fixes Issue #73
-------------------------------------------------------------------
Wed Nov 4 09:53:01 CET 2015 - ms@suse.de
- Adaptions to replication/publishing SDK patches
My patches to the Azure SDK were accepted, however I had to
rename the methods and the class where they live after review
by $MS. Thus these changes have an effect on azurectl too
-------------------------------------------------------------------
Wed Oct 21 16:54:50 CEST 2015 - ms@suse.de
- minor version bump
-------------------------------------------------------------------
Wed Oct 21 09:15:51 CEST 2015 - ms@suse.de
- Editorial review of message texts
-------------------------------------------------------------------
Wed Oct 21 09:03:36 CEST 2015 - ms@suse.de
- Editorial review of message texts
-------------------------------------------------------------------
Wed Oct 21 08:59:40 CEST 2015 - ms@suse.de
- Use the host DNS resolution setup
Instead of directly asking a public DNS server we use
the host DNS configuration and assume it's properly
configured
-------------------------------------------------------------------
Tue Oct 20 17:30:21 CEST 2015 - ms@suse.de
- Editorial review of message texts
-------------------------------------------------------------------
Tue Oct 20 16:36:18 CEST 2015 - ms@suse.de
- Editorial review of message texts
-------------------------------------------------------------------
Tue Oct 20 14:58:07 CEST 2015 - ms@suse.de
- Added check for region consistency
When running an instance of an image the following region
constraints must be fulfilled
* storage account region and cloud service region matches
* image exists in cloud service region
This patch adds those checks prior to running an instance
and provides useful error messages to the user. This
fixes Issue #69 and Issue #68
-------------------------------------------------------------------
Tue Oct 20 11:25:27 CEST 2015 - ms@suse.de
- Added check for cloudservice URL
A requested cloud service will be registered as public address in Azure
If this address is already in use the service comes back with a message
that is not clear to the user how to fix the situation. This patch adds
a DNS check prior to creating a new cloud service and provides a better
error message to the user. This fixes Issue #67
-------------------------------------------------------------------
Mon Oct 19 18:44:35 CEST 2015 - ms@suse.de
- Update manual page
Add information about minimal and mandatory sections in
the configuration file
-------------------------------------------------------------------
Mon Oct 19 18:37:19 CEST 2015 - ms@suse.de
- Prevent misleading use of template name
-------------------------------------------------------------------
Mon Oct 19 17:12:38 CEST 2015 - ms@suse.de
- Update usage message for --account option
-------------------------------------------------------------------
Mon Oct 19 10:57:36 CEST 2015 - ms@suse.de
- show all image attributes
azurectl compute image list did not show all information
-------------------------------------------------------------------
Mon Oct 19 10:47:42 CEST 2015 - jmason@suse.de
- Cascade up the location attribute removal.
-------------------------------------------------------------------
Fri Oct 16 15:45:43 CEST 2015 - ms@suse.de
- Update manual pages
manual page update due to code refactoring from Issues #60 and #61
-------------------------------------------------------------------
Fri Oct 16 15:38:00 CEST 2015 - ms@suse.de
- Delete config file options
storage_accounts and storage_containers are gone from the config
file. They were only used for pre validation of specified storage
account and container names. This validation is meaningless if
the data provided in the config file is not valid compared to the
service. In addition the combination of storage account and
container was not validated at all. Thus these data was removed
from the config file. If an invalid storage account or container
or a combination of both is used azurectl will raise an exception
with the data we get back from the service. This fixes Issue #61
-------------------------------------------------------------------
Fri Oct 16 14:46:44 CEST 2015 - ms@suse.de
- Refactor account handling
Instead of managing multiple account sections in one configuration
file we allow to select a configuration file by a template name
The former --account parameter specified a section name in a
configuration file. With this patch --account specifies a template
name for a configuration file with the name
~/.config/azurectl/<template_name>.config
Along with this change the options --config and --account are
mutually exclusive. --config still allows to specify any filename.
The basic structure of the configuration has not changed. Thus
it is still possible to maintain multiple account sections in
the configuration file, however only one can be actively selected
by the default_account attribute from the DEFAULT section.
Switching between accounts can be achieved by selecting a new
default account via 'azurectl setup account default --name ...'
but no longer via the --account option. This fixes Issue #60
-------------------------------------------------------------------
Fri Oct 16 13:22:03 CEST 2015 - jmason@suse.de
- Don't pass the 'media_location' attribute to python API
Signed-off-by: James Mason <jmason@suse.com>
-------------------------------------------------------------------
Fri Oct 16 09:25:16 CEST 2015 - ms@suse.de
- Fixed completion generator
mutual exclusive options were not parsed correctly
-------------------------------------------------------------------
Wed Oct 7 13:41:36 CEST 2015 - ms@suse.de
- Prefix accounts and regions in config file
-------------------------------------------------------------------
Tue Oct 6 09:16:35 CEST 2015 - ms@suse.de
- Fixed completion generator
global options without a value contained the closing bracket
-------------------------------------------------------------------
Mon Oct 5 18:38:46 CEST 2015 - ms@suse.de
- major version bump
-------------------------------------------------------------------
Mon Oct 5 18:38:23 CEST 2015 - ms@suse.de
- Update manual pages and documentation
-------------------------------------------------------------------
Mon Oct 5 12:34:44 CEST 2015 - ms@suse.de
- Change configuration file structure
Instead of one account section containing information about the Azure
account as well as information about the storage/container account it
is required to handle these information in separate sections. The reason
for this change is that storage accounts can exist in different regions.
Therefore the storage accounts should be placed in a region section
This refactoring also impacts commands with --region and/or --container
options because they are now handled as global options.
The new configuration format is as follows:
[DEFAULT]
default_account = account:name
default_region = region:name
[account:some-account]
publishsettings = filename
[region:some-region]
default_storage_account = name
default_storage_container = name
storage_accounts = comma-list
storage_containers = comma-list
The account setup command allows to perform the following actions
* add account and region sections
* remove sections
* set default account
* set default region
There is still room for improvement on the account setup command
However that should be part of an additional implementation. This
fixes Issue #57
-------------------------------------------------------------------
Fri Oct 2 10:52:32 CEST 2015 - ms@suse.de
- Revert "Add a script that enables running azurectl commands from the git project dir."
-------------------------------------------------------------------
Thu Oct 1 13:03:49 CEST 2015 - jmason@suse.de
- Add a script that enables runnign azurectl commands from the git project.
-------------------------------------------------------------------
Thu Oct 1 11:27:48 CEST 2015 - jmason@suse.de
- When creating a VM using an ssh key, wait for service to create the key dependency before continuing on.
-------------------------------------------------------------------
Mon Sep 28 16:59:21 CEST 2015 - ms@suse.de
- Some alpha order fixes
-------------------------------------------------------------------
Mon Sep 28 13:01:02 CEST 2015 - ms@suse.de
- Update manual page for setup account default
-------------------------------------------------------------------
Mon Sep 28 12:57:07 CEST 2015 - ms@suse.de
- Fixed config parser default section handling
The DEFAULT section in an INI file is handled special by
python's config parser implementation. Therefore this patch
refactors the way we use the config file sections. Any
section of the config file belongs to an account, the DEFAULT
section allows to select one of those accounts as the default
account with the default_account keyword. In addition the
subcommand to handle the default account was added. This
fixes Issue #51
-------------------------------------------------------------------
Fri Sep 25 10:56:18 CEST 2015 - jmason@suse.de
- Remove unnecessary imports and params
re: https://github.com/SUSE/azurectl/pull/52#discussion_r40405561
re: https://github.com/SUSE/azurectl/pull/52#discussion_r40405594
re: https://github.com/SUSE/azurectl/pull/52#discussion_r40405682
-------------------------------------------------------------------
Fri Sep 25 10:49:58 CEST 2015 - jmason@suse.de
- Fixup app initialization of CliTask
re: https://github.com/SUSE/azurectl/pull/52#discussion_r40405511
-------------------------------------------------------------------
Thu Sep 24 11:13:25 CEST 2015 - jmason@suse.de
- Override a smaller scoped method instead of __init__.
re: https://github.com/SUSE/azurectl/pull/52#discussion_r40293520
-------------------------------------------------------------------
Thu Sep 24 10:57:35 CEST 2015 - jmason@suse.de
- Simplify code around re-raising an error.
"By using raise with no arguments, you will re-raise the last exception."
- https://wiki.python.org/moin/HandlingExceptions
re: https://github.com/SUSE/azurectl/pull/52#discussion_r40293596
-------------------------------------------------------------------
Thu Sep 24 08:44:25 CEST 2015 - ms@suse.de
- Update coverage reference
-------------------------------------------------------------------
Thu Sep 24 00:03:16 CEST 2015 - ms@suse.de
- Fixed code smells
-------------------------------------------------------------------
Wed Sep 23 23:57:42 CEST 2015 - ms@suse.de
- Major version bump
Added request command
-------------------------------------------------------------------
Wed Sep 23 21:24:31 CEST 2015 - jmason@suse.de
- Update coverage
-------------------------------------------------------------------
Wed Sep 23 21:00:03 CEST 2015 - jmason@suse.de
- Allow `setup account add` to function without an existing config file
Addresses Issue #48
-------------------------------------------------------------------
Wed Sep 23 16:48:27 CEST 2015 - ms@suse.de
- Cleanup misleading use of get_service member
-------------------------------------------------------------------
Wed Sep 23 12:11:26 CEST 2015 - ms@suse.de
- Separate commands and options in usage message
-------------------------------------------------------------------
Tue Sep 22 12:41:10 CEST 2015 - ms@suse.de
- Added request management
Added support for obtaining request status and also waiting
for request completion for service management tasks
-------------------------------------------------------------------
Tue Sep 22 12:40:04 CEST 2015 - ms@suse.de
- Minor coverage checker fix
Don't fail on missing hash key
-------------------------------------------------------------------
Tue Sep 22 11:54:42 CEST 2015 - ms@suse.de
- Fixed wait_for_request_completion in vm create
The RequestResult class expects a service management instance
not a cloud service instance in order to get the request status.
-------------------------------------------------------------------
Fri Sep 18 20:57:04 CEST 2015 - ms@suse.de
- Minor version bump
Follow XDG Base Directory Specification for config file
-------------------------------------------------------------------
Fri Sep 18 20:47:45 CEST 2015 - ms@suse.de
- Update README file and manual page
Added information about config files to the README
Added information about debug option in the man page
-------------------------------------------------------------------
Fri Sep 18 20:02:47 CEST 2015 - ms@suse.de
- Better error message for config file not found
-------------------------------------------------------------------
Fri Sep 18 15:39:34 CEST 2015 - ms@suse.de
- Make config file message a debug message
Along with the change introduce a --debug global switch
-------------------------------------------------------------------
Fri Sep 18 10:22:24 CEST 2015 - ms@suse.de
- Display a log message which config file is used
-------------------------------------------------------------------
Fri Sep 18 10:18:56 CEST 2015 - ms@suse.de
- Make sure config file is read only once
I realized any instance of AzureAccount reads in the config
file. This is unwanted and should be done only once. In order
to fix this in a clean way the AzureAccount needs to receive
a Config instance instead of the data to create its own one
-------------------------------------------------------------------
Fri Sep 18 08:57:29 CEST 2015 - ms@suse.de
- Better error message for missing default config
-------------------------------------------------------------------
Thu Sep 17 16:23:44 CEST 2015 - ms@suse.de
- Moved primary default config file location
With respect to the XDG Base Directory Specification the default
config file location for azurectl has changed. The default config
file is now searched in the following order and paths
1. ~/.config/azurectl/config
2. ~/.azurectl/config
This fixes issue #41
-------------------------------------------------------------------
Fri Sep 11 10:26:39 CEST 2015 - ms@suse.de
- Move travis script to refer community project
Instead of my personal (schaefi) fork we should have the forked
repos for azure-storage and azure-sdk in the SUSE namespace to
allow all team members to contribute
-------------------------------------------------------------------
Wed Sep 9 11:40:44 CEST 2015 - jmason@suse.de
- Bugfix: image deletion
There are two types of images in Azure: OS Images, which are like 'templates',
and VM Images, which are extracted from a running VM.
Images are created with `create_os_image`; but the delete method attempted to
use `delete_vm_image`.
-------------------------------------------------------------------
Wed Sep 9 11:01:21 CEST 2015 - jmason@suse.de
- Sub version bump for bugfix on subscription selection
-------------------------------------------------------------------
Wed Sep 9 10:59:42 CEST 2015 - jmason@suse.de
- Consistent naming of fixtures
-------------------------------------------------------------------
Wed Sep 9 10:59:17 CEST 2015 - jmason@suse.de
- Recomplete test coverage
-------------------------------------------------------------------
Wed Sep 9 10:33:55 CEST 2015 - jmason@suse.de
- Bugfix: Load certificates from the selected subscription
-------------------------------------------------------------------
Wed Sep 9 10:09:36 CEST 2015 - jmason@suse.de
- Rename a function for improved clarity
-------------------------------------------------------------------
Wed Sep 9 09:31:46 CEST 2015 - ms@suse.de
- Minor style fix to make the completion happy
-------------------------------------------------------------------
Wed Sep 9 09:21:01 CEST 2015 - jmason@suse.de
- Minor version bump
+ publishing with subscription-id config support
-------------------------------------------------------------------
Tue Sep 8 21:33:15 CEST 2015 - jmason@suse.de
- An Azure account may contain many subscriptions:
+ Add a config option to select a subscription id from a set
+ Default to the first subscription in an account if no id is supplied
-------------------------------------------------------------------
Tue Sep 8 20:45:13 CEST 2015 - jmason@suse.de
- Test for default behavior when publishsettings includes more than one subscription
-------------------------------------------------------------------
Tue Sep 8 20:44:30 CEST 2015 - jmason@suse.de
- Add XML prefix to existing publishsettings fixtures
-------------------------------------------------------------------
Fri Sep 4 10:35:01 CEST 2015 - ms@suse.de
- Fixed build for older distributions <= 1110
-------------------------------------------------------------------
Thu Aug 27 15:56:49 CEST 2015 - ms@suse.de
- Fixed requires in setup.py
due to Azure renaming the module distribution the azurectl
required names has to follow the change too
-------------------------------------------------------------------
Thu Aug 27 11:26:03 CEST 2015 - jmason@suse.de
- Update coverage
-------------------------------------------------------------------
Thu Aug 27 11:25:04 CEST 2015 - jmason@suse.de
- Version bump due to new features
-------------------------------------------------------------------
Thu Aug 27 11:24:28 CEST 2015 - jmason@suse.de
- Update python-dateutil to match the package we ship in Cloud:Tools
-------------------------------------------------------------------
Wed Aug 26 17:09:43 CEST 2015 - ms@suse.de
- Support for VM publishing
-------------------------------------------------------------------
Wed Aug 26 12:16:16 CEST 2015 - ms@suse.de
- Set travis target to development branch
replication support has been added to the Azure SDK in the
compute_management_service development branch. As long as this
is not merged to Azure master testing needs to be done from there
-------------------------------------------------------------------
Wed Aug 26 12:12:51 CEST 2015 - ms@suse.de
- Support for VM image replication/unreplication
-------------------------------------------------------------------
Tue Aug 25 10:25:09 CEST 2015 - ms@suse.de
- Catch exceptions from get_storage_account_keys
-------------------------------------------------------------------
Mon Aug 24 09:45:52 CEST 2015 - ms@suse.de
- Update travis tests due to Azure SDK restructuring
The Azure Storage part of the SDK has been moved into its own
git repository. This testing and also packaging of the SDK
has changed
-------------------------------------------------------------------
Tue Jul 28 11:24:42 CEST 2015 - ms@suse.de
- Fixed cloud service creation
Instead of looking for a specific exception type on creation
of a cloud service check before if the cloud service in question
already exists by calling get_hosted_service_properties
-------------------------------------------------------------------
Tue Jul 28 11:23:51 CEST 2015 - ms@suse.de
- Avoid unspecified except blocks
-------------------------------------------------------------------
Sun Jul 26 22:39:37 CEST 2015 - ms@suse.de
- Update SDK version requirement
-------------------------------------------------------------------
Fri Jul 24 15:51:45 CEST 2015 - ms@suse.de
- Specify log string format arguments as parameters
-------------------------------------------------------------------
Fri Jul 24 15:40:24 CEST 2015 - ms@suse.de
- Specify log string format arguments as parameters
-------------------------------------------------------------------
Fri Jul 24 15:20:34 CEST 2015 - ms@suse.de
- Fixed Health indicator
-------------------------------------------------------------------
Fri Jul 24 15:17:11 CEST 2015 - ms@suse.de
- Added code health status to README
-------------------------------------------------------------------
Fri Jul 24 15:11:23 CEST 2015 - ms@suse.de
- Don't use old style class declarations
-------------------------------------------------------------------
Fri Jul 24 12:03:32 CEST 2015 - ms@suse.de
- Fixed unused imports and variables
-------------------------------------------------------------------
Fri Jul 24 11:47:32 CEST 2015 - ms@suse.de
- Fixed unused imports from OpenSSL.crypto
-------------------------------------------------------------------
Fri Jul 24 11:35:54 CEST 2015 - ms@suse.de
- Fixed unused imports
-------------------------------------------------------------------
Fri Jul 24 10:30:10 CEST 2015 - ms@suse.de
- Specify the scope of the travis requirements file
-------------------------------------------------------------------
Fri Jul 24 10:26:17 CEST 2015 - ms@suse.de
- Moved comment from travis.yml to requirements.txt
The comment about azure usage from pip and the fact that
we currently use the dev branch has been moved to the
requirements.txt file
-------------------------------------------------------------------
Fri Jul 24 09:13:46 CEST 2015 - tom_schr@suse.de
- Renamed requirements.txt -> .requirements.txt
As suggested by Marcus :)
-------------------------------------------------------------------
Thu Jul 23 18:15:56 CEST 2015 - tom_schr@suse.de
- Support pip requirements.txt for Travis too
-------------------------------------------------------------------
Thu Jul 23 18:12:05 CEST 2015 - tom_schr@suse.de
- Inserted requirements.txt for pip
Useful as you don't need to change .travis.yml and only the
file requirements.txt.
For more information, see
https://pip.readthedocs.org/en/1.1/requirements.html
-------------------------------------------------------------------
Tue Jul 21 16:59:32 CEST 2015 - ms@suse.de
- Update code base to use SDK's dev branch
Microsoft will release the dev branch to be the new SDK.
The version will be at 0.20.x and is incompatible to 0.11.x
This commit updates azurectl to work with the dev branch
-------------------------------------------------------------------
Sun Jul 19 22:48:33 CEST 2015 - ms@suse.de
- Revert "Integrate with https://codecov.io"
Sorry my fault, wanted to integrate with landscape.io and not
with codecov. This reverts commit 956b81b
-------------------------------------------------------------------
Sun Jul 19 22:40:08 CEST 2015 - ms@suse.de
- Integrate with https://codecov.io
-------------------------------------------------------------------
Fri Jul 17 11:23:18 CEST 2015 - ms@suse.de
- Fixed completion generator
Add special handling for --version which will also support
a short option form -v added by James in the next commit
-------------------------------------------------------------------
Thu Jul 16 10:37:58 CEST 2015 - jmason@suse.de
- Short switch `-v` for version.
-------------------------------------------------------------------
Thu Jul 16 08:30:15 CEST 2015 - tom_schr@suse.de
- Added Travis batch image
-------------------------------------------------------------------
Wed Jul 15 17:41:05 CEST 2015 - jmason@suse.de
- Increment azure-sdk dependency to match version in OBS.
-------------------------------------------------------------------
Wed Jul 15 17:37:59 CEST 2015 - jmason@suse.de
- Remove logging noise during uploads.
The scheduler was still triggering events during upload, causing lots of
log noise around the progress bar. Proposed solution is to add another
class of event for logging to ignore.
TODO: subversion bump on merge.
-------------------------------------------------------------------
Wed Jul 15 16:33:30 CEST 2015 - jmason@suse.de
- Minor version bump.
In accordance with semantic versioning, both the `azure files` functions
and the `compute vm` functions should have been accompanied by a version
bump.
Time to catch up.
-------------------------------------------------------------------
Wed Jul 8 13:03:38 CEST 2015 - ms@suse.de
- Added support for compute vm types
List available instance types and their attributes
-------------------------------------------------------------------
Tue Jul 7 18:13:46 CEST 2015 - ms@suse.de
- Don't require test env to provide a config file
-------------------------------------------------------------------
Tue Jul 7 17:48:19 CEST 2015 - ms@suse.de
- Use of has_key is deprecated
-------------------------------------------------------------------
Tue Jul 7 17:30:29 CEST 2015 - ms@suse.de
- Test code coverage now at 100%
-------------------------------------------------------------------
Tue Jul 7 16:31:02 CEST 2015 - ms@suse.de
- Editorial review compute::vm manual page
-------------------------------------------------------------------
Mon Jul 6 18:57:24 CEST 2015 - ms@suse.de
- Don't require tests to have pjson installed
-------------------------------------------------------------------
Mon Jul 6 18:38:00 CEST 2015 - ms@suse.de
- Test code coverage now at 99%
-------------------------------------------------------------------
Sun Jul 5 22:57:34 CEST 2015 - ms@suse.de
- Added RequestResult class
Encapsulate operations based on a request ID returned from the
Azure API. This makes the code more explicit as well as allows
to think of commands like
azurectl compute request status --id <id>
azurectl compute request wait --id <id>
in the future
-------------------------------------------------------------------
Fri Jul 3 15:02:49 CEST 2015 - ms@suse.de
- Update spec file requirements
-------------------------------------------------------------------
Fri Jul 3 11:28:25 CEST 2015 - ms@suse.de
- Fixed completion generator
Option values of the form [opt1=<val1> | opt2=<val2>] were
not processed correctly
-------------------------------------------------------------------
Thu Jul 2 12:46:16 CEST 2015 - ms@suse.de
- Update manual page for azurectl compute vm
-------------------------------------------------------------------
Wed Jul 1 10:23:50 CEST 2015 - ms@suse.de
- Fixed shell quotation for bin/azurectl helper
-------------------------------------------------------------------
Mon Jun 29 10:36:45 CEST 2015 - ms@suse.de
- Added compute image delete command
Along with virtual machine creation the deletion of the image
created per instance should be possible. This also completes
the image command
-------------------------------------------------------------------
Fri Jun 26 22:25:38 CEST 2015 - ms@suse.de
- Added support for virtual machine management
-------------------------------------------------------------------
Wed Jun 24 12:04:24 CEST 2015 - ms@suse.de
- Update travis setup to allow custom azure versions
-------------------------------------------------------------------
Wed Jun 24 09:44:01 CEST 2015 - ms@suse.de
- Added support for the Azure File Share service
azurectl compute storage share list, create and delete will be
added with this commit. Once created a file share can be mounted
using a CIFS mount
-------------------------------------------------------------------
Wed Jun 10 12:07:04 CEST 2015 - ms@suse.de
- Update README
signing git patches belongs to issue tracking and solving
-------------------------------------------------------------------
Wed Jun 10 11:03:34 CEST 2015 - ms@suse.de
- Update README
Improve the flow of reading the doc in the sequence of the tasks
in order to get started
-------------------------------------------------------------------
Wed Jun 10 10:45:37 CEST 2015 - ms@suse.de
- Update README
Added information how to install azurectl via zypper
-------------------------------------------------------------------
Tue Jun 9 10:25:04 CEST 2015 - ms@suse.de
- Catch ConfigParser exceptions and handle them
When adding a section we might run into error conditions like
DuplicateSectionError. These were not handled and caused an
Unexpected error plus trace
-------------------------------------------------------------------
Mon Jun 8 23:11:59 CEST 2015 - ms@suse.de
- Switch back to argument lists
For details read Pull #27
-------------------------------------------------------------------
Mon Jun 8 22:41:49 CEST 2015 - ms@suse.de
- Update README, editorial changes
-------------------------------------------------------------------
Mon Jun 8 09:19:41 CEST 2015 - ms@suse.de
- Update README
Make the section about signing git commits more readable due
to style and format
-------------------------------------------------------------------
Mon Jun 8 09:10:58 CEST 2015 - ms@suse.de
- Added information about azurectl setup account use
-------------------------------------------------------------------
Fri Jun 5 09:10:46 CEST 2015 - ms@suse.de
- Prevent hard class dependency
Don't create a hard dependency between commandline arguments
and the implementation classes uses them
-------------------------------------------------------------------
Thu Jun 4 22:13:11 CEST 2015 - ms@suse.de
- Apply Sandy Metz, practical OO design pattern
Use an argument hash for methods with more than one or two arguments
-------------------------------------------------------------------
Thu Jun 4 21:46:05 CEST 2015 - ms@suse.de
- Validate if given publish settings files exists
On 'azurectl setup account add' check if the given publish
settings file exists
-------------------------------------------------------------------
Thu Jun 4 21:31:44 CEST 2015 - ms@suse.de
- Fixed typo in exception message
print information about filename not class name
-------------------------------------------------------------------
Wed Jun 3 14:22:52 CEST 2015 - rjschwei@suse.de
- Add information about signing of code commits
-------------------------------------------------------------------
Tue Jun 2 22:18:25 CEST 2015 - ms@suse.de
- Make sure warning messages are logged on stdout
-------------------------------------------------------------------
Tue Jun 2 16:44:05 CEST 2015 - ms@suse.de
- Update coverage reference
-------------------------------------------------------------------
Tue Jun 2 11:41:05 CEST 2015 - ms@suse.de
- Added azurectl setup service
The command allows to manage the azurectl configuration by
adding, deleting and listing configuration sections. This
Fixes #10
-------------------------------------------------------------------
Tue Jun 2 11:35:03 CEST 2015 - ms@suse.de
- Fixed coverage checker
Dealing with new source files not part of the reference data
caused an exception in the checker. This is fixed treating new
source files as 100% covered which are then compared with their
real coverage value. If the new source can't be 100% covered
an update of the reference data is needed via 'make coverage'
-------------------------------------------------------------------
Mon Jun 1 15:20:26 CEST 2015 - ms@suse.de
- Fixed build
latest change to make build target breaks the build because the
spec file template was not adapted accordingly
-------------------------------------------------------------------
Mon Jun 1 15:08:45 CEST 2015 - ms@suse.de
- Update spec file requirements
Due to incompatible changes in the SDK version from Microsoft
we explicitly bind azurectl to an SDK version >= 0.11.0
-------------------------------------------------------------------
Mon Jun 1 15:03:24 CEST 2015 - ms@suse.de
- Fixed setup.py azure module version dependency
-------------------------------------------------------------------
Sun May 31 20:42:58 CEST 2015 - ms@suse.de
- Fixed azurectl for use with latest SDK version
The way how shared access signatures are created has changed incompatible
-------------------------------------------------------------------
Sat May 30 06:42:53 CEST 2015 - rjschwei@suse.de
- Provide version number in the tarballs generated by the 'make build'
+ It is easier for packagers to manage packaging if the version number
is encoded in the name of the tarball. This is also common accepted
practice. This fixes Issue #24
-------------------------------------------------------------------
Fri May 22 09:48:42 CEST 2015 - ms@suse.de
- get_operation_status called on the wrong object
The status can be queried with a request ID from the
ServiceManagementService and not from AsynchronousOperationResult
This Fixes #22
-------------------------------------------------------------------
Wed May 20 09:41:03 CEST 2015 - ms@suse.de
- Fixed Makefile target: build
Delete version information from setup.py on make build
The rpm package and the packagemanager should handle this
exclusively and we don't want the egg info to play a role
here
-------------------------------------------------------------------
Wed May 20 09:01:04 CEST 2015 - ms@suse.de
- Version 0.8.4
Final touches before first public release
-------------------------------------------------------------------
Tue May 19 15:50:17 CEST 2015 - ms@suse.de
- Pin required python modules to version in setup.py
-------------------------------------------------------------------
Tue May 19 12:20:40 CEST 2015 - jmason@suse.de
- Suggested changes to the existing manpage content
-------------------------------------------------------------------
Tue May 19 11:17:05 CEST 2015 - jmason@suse.de
- s/azure?cli/azurectl/g
Tests pass, make makes
-------------------------------------------------------------------
Mon May 18 16:34:52 CEST 2015 - ms@suse.de
- Added test code coverage check
Based on a reference file test/unit/coverage.reference.xml a check runs
which compares the coverage ratio from a current nosetests coverage
information with the reference data. If the code coverage decreases
this is an error and coverage-check invoked by 'make test' with fail
-------------------------------------------------------------------
Fri May 15 17:40:14 CEST 2015 - ms@suse.de
- Log error messages to stderr and info to stdout
-------------------------------------------------------------------
Fri May 15 17:06:31 CEST 2015 - ms@suse.de
- Update travis setup
Use an azure SDK version from pip compatible with the
rpm packaged version we ship
-------------------------------------------------------------------
Fri May 15 15:14:01 CEST 2015 - ms@suse.de
- Filter out message from BackgroundSscheduler
Appscheduler is auto connected to the python logging system
and spawns info messages about each iteration. We don't want to
see this information especially when we show a progress information
from a long running process
-------------------------------------------------------------------
Fri May 15 13:21:13 CEST 2015 - rjschwei@suse.de
- Add information agreed upon during final code review
-------------------------------------------------------------------
Tue May 12 12:31:37 CEST 2015 - ms@suse.de
- Fixed setup
the name of the dateutil module is python-dateutil
In order to fix the requirement list the name must
match
-------------------------------------------------------------------
Wed May 6 17:03:15 CEST 2015 - ms@suse.de
- Fixed man page typos
-------------------------------------------------------------------
Wed May 6 16:55:28 CEST 2015 - ms@suse.de
- Fixed missing logging.setLevel
By default logging.INFO is used but other loglevels are possible
if specified the call to make the level effective was missing
-------------------------------------------------------------------
Wed May 6 16:31:10 CEST 2015 - ms@suse.de
- Update README
-------------------------------------------------------------------
Wed May 6 15:51:10 CEST 2015 - ms@suse.de
- Added azure_command_help.txt reference data
The README points to this information but it is not present in
the repo. It was only present on the trello card
-------------------------------------------------------------------
Wed May 6 15:20:45 CEST 2015 - ms@suse.de
- Update README
-------------------------------------------------------------------
Wed May 6 15:19:46 CEST 2015 - ms@suse.de
- Update README
-------------------------------------------------------------------
Wed May 6 15:10:09 CEST 2015 - ms@suse.de
- Beautify error message output
prevent unneeded class path information and use format
instead of str to format output strings provided by the SDK
-------------------------------------------------------------------
Wed May 6 11:32:14 CEST 2015 - ms@suse.de
- Version 0.8.3
Added support for Shared Access Signature URLs
-------------------------------------------------------------------
Tue May 5 23:23:40 CEST 2015 - ms@suse.de
- Added DataOutput class
In order to support different output styles e.g json, XML or machine
readable a new class to encapsulate this has been introduced. By
default we will use json as output format. Along with this change
also colored output is added which Fixes #11
-------------------------------------------------------------------
Tue May 5 21:36:17 CEST 2015 - ms@suse.de
- Fixed log.info call
One overlooked old style info call, now clean with the
python logging info implementation
-------------------------------------------------------------------
Tue May 5 20:57:07 CEST 2015 - ms@suse.de
- Fixed storage::container man page layout
markdown to man conversion requires this style change
-------------------------------------------------------------------
Tue May 5 15:34:08 CEST 2015 - ms@suse.de
- Use python logging class
The python logging class offers most of the functionality
we need to log our messages. However it does not provide
a progress indicator. Thus the logging class as it is used
here is also extended by a progress indicator
-------------------------------------------------------------------
Tue May 5 11:34:33 CEST 2015 - jmason@suse.de
- Add manpage content & fix a typo in docopts.
-------------------------------------------------------------------
Tue May 5 11:20:58 CEST 2015 - ms@suse.de
- Added file type identification for upload source
The azurectl compute storage upload command will now detect the
filetype and apply the decompression only for detected types.
If no supported decompressor type is found the file is uploaded
as it is
-------------------------------------------------------------------
Tue May 5 11:20:19 CEST 2015 - jmason@suse.de
- Add additional dependency: dateutil
The other additional includes are all part of the std. libraries
(datetime, re, urlparse).
-------------------------------------------------------------------
Mon May 4 11:42:53 CEST 2015 - jmason@suse.de
- Change travis config to allow use of container service
-------------------------------------------------------------------
Mon May 4 11:29:26 CEST 2015 - jmason@suse.de
- Redefine test to be not bound to my specific signature.
-------------------------------------------------------------------
Mon May 4 10:19:43 CEST 2015 - jmason@suse.de
- Generate SAS URLS for storage containers
-------------------------------------------------------------------
Mon May 4 10:18:10 CEST 2015 - jmason@suse.de
- Change unknown exception to closest existing match.
-------------------------------------------------------------------
Mon May 4 10:17:23 CEST 2015 - jmason@suse.de
- Validate new arguments
-------------------------------------------------------------------
Fri May 1 10:06:24 CEST 2015 - jmason@suse.de
- Add task & interface for generating container SAS urls
-------------------------------------------------------------------
Wed Apr 29 17:52:02 CEST 2015 - ms@suse.de
- Fixed exception handling in AzureAccount
exceptions from the service management service were
not caught which caused an unexpected error
-------------------------------------------------------------------
Wed Apr 29 13:03:03 CEST 2015 - ms@suse.de
- Fixed install_requires in setup.py
-------------------------------------------------------------------
Tue Apr 28 18:01:51 CEST 2015 - ms@suse.de
- Use SDK make_blob_url to construct the media_link
-------------------------------------------------------------------
Tue Apr 28 16:38:35 CEST 2015 - ms@suse.de
- Added note that we need a get_media_link in the SDK
-------------------------------------------------------------------
Tue Apr 28 16:05:21 CEST 2015 - ms@suse.de
- Added azure sdk via pip to travis tests
-------------------------------------------------------------------
Tue Apr 28 14:49:57 CEST 2015 - ms@suse.de
- Only run pep8 tests in travis
Because the azure-cloud-sdk is not available in pip
the support for running unit tests is currently disabled
-------------------------------------------------------------------
Tue Apr 28 14:46:44 CEST 2015 - ms@suse.de
- Added pep8 to travis install section
-------------------------------------------------------------------
Tue Apr 28 14:39:28 CEST 2015 - ms@suse.de
- Added travis CI configuration
The project will be added to the Travis Continous
Integration Test framework
-------------------------------------------------------------------
Tue Apr 28 13:53:43 CEST 2015 - ms@suse.de
- Added tests for exceptions
AzureBlobServicePropertyError, AzureOsImageCreateError
-------------------------------------------------------------------
Tue Apr 28 12:47:15 CEST 2015 - ms@suse.de
- Added azurectl compute image create command
This command implements the creation of an Os image
from a VHD disk image file stored in a Microsoft Azure
storage container
-------------------------------------------------------------------
Mon Apr 27 13:57:25 CEST 2015 - ms@suse.de
- Fixed Makefile default target processing
-------------------------------------------------------------------
Mon Apr 27 13:53:12 CEST 2015 - ms@suse.de
- Better error message for unknown service command
-------------------------------------------------------------------
Sun Apr 5 14:15:29 CEST 2015 - ms@suse.de
- Update README
style fix for list elements
-------------------------------------------------------------------
Sun Apr 5 14:13:41 CEST 2015 - ms@suse.de
- Update README
-------------------------------------------------------------------
Sun Apr 5 14:10:57 CEST 2015 - ms@suse.de
- Update README
Add information about manual pages
-------------------------------------------------------------------
Sat Apr 4 21:10:31 CEST 2015 - ms@suse.de
- Integrate man pages to package
-------------------------------------------------------------------
Sat Apr 4 18:56:08 CEST 2015 - ms@suse.de
- Added manual page system
Each command and subcommand understands 'help' and opens
the appropriate man page for detailed information
-------------------------------------------------------------------
Sat Apr 4 15:23:39 CEST 2015 - ms@suse.de
- Added manual page templates for azurectl commands
-------------------------------------------------------------------
Fri Apr 3 22:37:51 CEST 2015 - ms@suse.de
- Fixed rpmlint warnings
-------------------------------------------------------------------
Fri Apr 3 22:31:25 CEST 2015 - ms@suse.de
- Fixed spec file template due to name change
-------------------------------------------------------------------
Fri Apr 3 22:28:28 CEST 2015 - ms@suse.de
- Fixed package build target
completion source tarball does not contain the azurectl.sh
completion script at the right path
-------------------------------------------------------------------
Fri Apr 3 22:16:30 CEST 2015 - ms@suse.de
- Fixed package build target
completion source file has changed its name
-------------------------------------------------------------------
Fri Apr 3 22:12:36 CEST 2015 - ms@suse.de
- Fixed spec file due to name change
-------------------------------------------------------------------
Fri Apr 3 21:58:40 CEST 2015 - ms@suse.de
- Fixed azurectl completion
Continue to complete possible option values for the used command
even if one of the set is already used in the command line
-------------------------------------------------------------------
Fri Apr 3 21:27:37 CEST 2015 - ms@suse.de
- Fixed typo in AzureXZError exception message
-------------------------------------------------------------------
Fri Apr 3 01:55:15 CEST 2015 - ms@suse.de
- Update completion generator
The previous version was based on completing positional
parameters. But we don't want to use them thus the completion
file generator has to adapt
-------------------------------------------------------------------
Fri Apr 3 01:54:32 CEST 2015 - ms@suse.de
- Don't use positional arguments in help command
-------------------------------------------------------------------
Thu Apr 2 16:13:48 CEST 2015 - ms@suse.de
- Don't use positional parameters
-------------------------------------------------------------------
Thu Apr 2 12:54:39 CEST 2015 - ms@suse.de
- Added unit tests for publish settings exceptions
-------------------------------------------------------------------
Wed Apr 1 18:19:38 CEST 2015 - ms@suse.de
- Added --quiet option for upload
In addition document the available option values
-------------------------------------------------------------------
Wed Apr 1 17:51:15 CEST 2015 - ms@suse.de
- Handle error conditions for publishsettings import
Exceptions for invalid XML and/or missing Subscription section
are captured as well es decoding errors from pkcs12/base64
decryption
-------------------------------------------------------------------
Tue Mar 31 13:56:04 CEST 2015 - ms@suse.de
- Fully automated creation of bash completion file
completion_generator now based on python to parse the docopt
string and turn that information into a bash completion file
-------------------------------------------------------------------
Mon Mar 30 02:05:19 CEST 2015 - rjschwei@suse.de
- Support a default location on non Unix based system
-------------------------------------------------------------------
Sun Mar 29 13:50:42 CEST 2015 - ms@suse.de
- Fixed task unit tests
The tests should not read the default config file, they
should read the unit test provided config file
-------------------------------------------------------------------
Sun Mar 29 11:36:03 CEST 2015 - rjschwei@suse.de
- Handle parse error
+ Provide the user with a reasonable message if there is an error
parsing the config file.
-------------------------------------------------------------------
Sun Mar 29 10:59:21 CEST 2015 - rjschwei@suse.de
- Copyright needs a year to be valid
-------------------------------------------------------------------
Sun Mar 29 10:54:50 CEST 2015 - rjschwei@suse.de
- Add pre-commit hook
+ Run basic testing locally before commiting changes to the branch.
This should help to catch the most obvious errors first.
-------------------------------------------------------------------
Sun Mar 29 10:30:57 CEST 2015 - rjschwei@suse.de
- rename the config class read() method to get_option()
+ The new name is less ganeric and reflects more closely the purpose
of the method.
- rjschwei@suse.de
- Editorial changes and additions for README.md
+ Add dependency list
+ Add more information about how to contribute
-------------------------------------------------------------------
Sat Mar 28 22:36:24 CET 2015 - ms@suse.de
- Fixed completion for current caller syntax
This one is just a start. The completion script is a static
version and not yet autogenerated from the source code
-------------------------------------------------------------------
Sat Mar 28 22:31:38 CET 2015 - ms@suse.de
- Update location of global options in help message
-------------------------------------------------------------------
Fri Mar 27 23:21:03 CET 2015 - ms@suse.de
- Update README due to to rename of the tool
-------------------------------------------------------------------
Fri Mar 27 23:01:57 CET 2015 - ms@suse.de
- Adapt command usage help to new caller layout
-------------------------------------------------------------------
Fri Mar 27 22:09:52 CET 2015 - ms@suse.de
- Adapt unit tests to new caller layout
-------------------------------------------------------------------
Thu Mar 26 00:49:23 CET 2015 - ms@suse.de
- Restructure command call syntax due to review
-------------------------------------------------------------------
Wed Mar 25 19:49:59 CET 2015 - ms@suse.de
- Clarify parameter names in __query_account_for()
-------------------------------------------------------------------
Wed Mar 25 19:47:55 CET 2015 - ms@suse.de
- Perform align check prior to setting upload status
-------------------------------------------------------------------
Wed Mar 25 19:33:28 CET 2015 - ms@suse.de
- Added doc string for all classes
-------------------------------------------------------------------
Wed Mar 25 18:49:32 CET 2015 - ms@suse.de
- Fixed e-mail address in setup.py
-------------------------------------------------------------------
Wed Mar 25 18:47:37 CET 2015 - ms@suse.de
- Rename exceptions to azurectl_exceptions
Avoid confusion about generic python exception class
-------------------------------------------------------------------
Wed Mar 25 18:34:52 CET 2015 - ms@suse.de
- Rename azure-cli command to azurectl
-------------------------------------------------------------------
Wed Mar 25 18:20:01 CET 2015 - ms@suse.de
- Added Apache license and pre-able to source files
-------------------------------------------------------------------
Wed Mar 25 14:14:28 CET 2015 - ms@suse.de
- Automatically know about new commands
-------------------------------------------------------------------
Wed Mar 25 11:26:50 CET 2015 - ms@suse.de
- First series of patches according to style guide
Also added a pep8 test target for the source and the tests
-------------------------------------------------------------------
Tue Mar 24 09:31:21 CET 2015 - ms@suse.de
- Correct program name in version output
-------------------------------------------------------------------
Tue Mar 24 09:31:08 CET 2015 - ms@suse.de
- Delete unused code
-------------------------------------------------------------------
Mon Mar 23 11:01:58 CET 2015 - ms@suse.de
- Update bash completion
-------------------------------------------------------------------
Mon Mar 23 10:59:33 CET 2015 - ms@suse.de
- Added missing test for storage_container method
-------------------------------------------------------------------
Mon Mar 23 10:57:49 CET 2015 - ms@suse.de
- Update README
-------------------------------------------------------------------
Sat Mar 21 20:41:53 CET 2015 - ms@suse.de
- Added default container name in config file
-------------------------------------------------------------------
Fri Mar 20 11:13:50 CET 2015 - ms@suse.de
- Make sure the upload progress is shown
At the end of an upload update the upload status to
ensure a final result information
-------------------------------------------------------------------
Fri Mar 20 09:56:49 CET 2015 - ms@suse.de
- Added percentage progress bar on upload
-------------------------------------------------------------------
Thu Mar 19 14:24:03 CET 2015 - ms@suse.de
- Added python-azure-sdk requirement to spec file
-------------------------------------------------------------------
Tue Mar 17 11:17:30 CET 2015 - ms@suse.de
- Fixed build
-------------------------------------------------------------------
Mon Mar 16 22:07:25 CET 2015 - ms@suse.de
- Added completion data to build source
-------------------------------------------------------------------
Mon Mar 16 21:56:11 CET 2015 - ms@suse.de
- Added automatic creation of completion script
-------------------------------------------------------------------
Mon Mar 16 17:12:45 CET 2015 - ms@suse.de
- Switch back to default completion if no cmd result
-------------------------------------------------------------------
Mon Mar 16 15:56:07 CET 2015 - ms@suse.de
- Added version.py
export __version__ for the entire tool and use it at
runtime and for building the package
-------------------------------------------------------------------
Mon Mar 16 15:39:45 CET 2015 - ms@suse.de
- Added rpm package build infrastructure
-------------------------------------------------------------------
Thu Mar 12 17:51:17 CET 2015 - aosthof@suse.de
- Proofread and correct README.md for azure-cli
-------------------------------------------------------------------
Thu Mar 12 10:57:17 CET 2015 - ms@suse.de
- Update README
Provide more detailed information how to download the
publishsettings file for a specific azure account
-------------------------------------------------------------------
Tue Mar 10 21:40:31 CET 2015 - ms@suse.de
- Read new zero_page only if required
-------------------------------------------------------------------
Tue Mar 10 17:28:56 CET 2015 - ms@suse.de
- Explicitly set UTC timezone for upload
-------------------------------------------------------------------
Tue Mar 10 16:32:00 CET 2015 - ms@suse.de
- APScheduler api has changed
adapt code for use with non blocking scheduler
-------------------------------------------------------------------
Tue Mar 10 10:13:53 CET 2015 - ms@suse.de
- Update README
-------------------------------------------------------------------
Sun Mar 8 21:58:17 CET 2015 - ms@suse.de
- Added bash completion to install target
-------------------------------------------------------------------
Sun Mar 8 21:55:48 CET 2015 - ms@suse.de
- Make --max-chunk-size a disk command option
Remove the option from the global space
-------------------------------------------------------------------
Sun Mar 8 21:49:11 CET 2015 - ms@suse.de
- Added bash completion
-------------------------------------------------------------------
Sun Mar 8 17:14:25 CET 2015 - ms@suse.de
- Add a Config class and test
Move the former account super class to be a config class
because that's what it knows about. The single responsibility
of the Config class is to be able to read the config file
parameters
-------------------------------------------------------------------
Sun Mar 8 17:05:37 CET 2015 - ms@suse.de
- No need to have an Account super class
Since there is now only one AzureAccount class there is no
need to have an account super class
-------------------------------------------------------------------
Sun Mar 8 14:17:55 CET 2015 - ms@suse.de
- Switch to JSON output
-------------------------------------------------------------------
Sun Mar 8 14:02:15 CET 2015 - ms@suse.de
- More precise help messages for container and disk
-------------------------------------------------------------------
Sun Mar 8 13:52:33 CET 2015 - ms@suse.de
- Use named tuples instead of hash keys
This is to keep the dot notation and the message based
object design
-------------------------------------------------------------------
Sun Mar 8 11:16:03 CET 2015 - ms@suse.de
- On XZ error raise useful exception
-------------------------------------------------------------------
Sat Mar 7 23:01:09 CET 2015 - ms@suse.de
- Refactor account usage
Use only one AzureAccount class to handle storage and
service account credentials. They are tied together anyway
-------------------------------------------------------------------
Sat Mar 7 00:58:32 CET 2015 - ms@suse.de
- Cleanup storage account unit test
class stub names have to correspond with the implementation
-------------------------------------------------------------------
Fri Mar 6 23:32:00 CET 2015 - ms@suse.de
- Make use of mock.patch
Instead of global Fake class definitions use patch
feature for unit tests
-------------------------------------------------------------------
Fri Mar 6 23:31:28 CET 2015 - ms@suse.de
- Added 512 byte align check for PageBlobs
-------------------------------------------------------------------
Fri Mar 6 09:04:05 CET 2015 - ms@suse.de
- Accept XZ compressed input for upload
In addition an the option --name for disk upload has been added
to specify the target name of the image file in the container
-------------------------------------------------------------------
Thu Mar 5 17:08:22 CET 2015 - ms@suse.de
- Added XZ decompression class
-------------------------------------------------------------------
Thu Mar 5 12:33:32 CET 2015 - ms@suse.de
- Update README
-------------------------------------------------------------------
Thu Mar 5 12:23:07 CET 2015 - ms@suse.de
- Move container content <name> to disk command
It feels more natural to allow listing the disk in a container
by a disk list <container> command which also allows upload
and deletion
-------------------------------------------------------------------
Tue Mar 3 16:38:29 CET 2015 - ms@suse.de
- Fixed too many spaces in variable assignment
-------------------------------------------------------------------
Tue Mar 3 16:32:38 CET 2015 - ms@suse.de
- Upload only non zero pages
This implements a smarter handling of sparse file uploading
-------------------------------------------------------------------
Tue Mar 3 16:17:35 CET 2015 - ms@suse.de
- Use put_page to allow offset based page updates
-------------------------------------------------------------------
Tue Mar 3 14:58:36 CET 2015 - ms@suse.de
- Implement our own chunking in upload
This is done to be more flexible in uploading big files as
list of blocks. Better handling of sparse file uploads will
be a follow up on this change
-------------------------------------------------------------------
Thu Feb 26 15:59:41 CET 2015 - ms@suse.de
- Update README
-------------------------------------------------------------------
Thu Feb 26 15:53:51 CET 2015 - ms@suse.de
- Update README
-------------------------------------------------------------------
Thu Feb 26 11:37:31 CET 2015 - ms@suse.de
- Add used storage account name in container info
When calling e.g 'container list' you get all container names
but you don't know from which storage account name was used
One would need to look at the config file to check which
storage account name was configured which could be avoided
by just adding this information to the output
-------------------------------------------------------------------
Thu Feb 26 11:28:04 CET 2015 - ms@suse.de
- Added azure-cli storage command
Allows to list names of storage accounts
-------------------------------------------------------------------
Thu Feb 26 11:02:10 CET 2015 - ms@suse.de
- Added method to get storage names
Added method StorageAccount::list() which returns the names
of the available storage accounts within the subscription.
-------------------------------------------------------------------
Tue Feb 17 16:59:17 CET 2015 - ms@suse.de
- Added list_tests and single test targets
-------------------------------------------------------------------
Tue Feb 17 16:51:14 CET 2015 - ms@suse.de
- Fixed unit tests
mocked classes are not reset which prevented the tests
from being able to run separately
-------------------------------------------------------------------
Tue Feb 17 15:01:41 CET 2015 - ms@suse.de
- Fixed typo, uppload -> upload
-------------------------------------------------------------------
Tue Feb 17 14:51:31 CET 2015 - ms@suse.de
- Makefile target for test should be a phony target
-------------------------------------------------------------------
Tue Feb 10 23:46:29 CET 2015 - ms@suse.de
- Don't require explicit import of task classes
-------------------------------------------------------------------
Tue Feb 10 23:10:40 CET 2015 - ms@suse.de
- Move command docopt usage to task classes
Cleanup and simplify task classes unit tests
-------------------------------------------------------------------
Tue Feb 10 18:49:33 CET 2015 - ms@suse.de
- Delete unused get_command() call
-------------------------------------------------------------------
Thu Jan 22 17:50:41 CET 2015 - ms@suse.de
- Add missing assertions to task tests
-------------------------------------------------------------------
Tue Jan 20 18:37:38 CET 2015 - ms@suse.de
- Restructure command processing
What should be done for a command and its options should
be encapsulated in a task class which knows that
-------------------------------------------------------------------
Fri Jan 16 16:13:52 CET 2015 - ms@suse.de
- Update README
-------------------------------------------------------------------
Fri Jan 16 16:06:28 CET 2015 - ms@suse.de
- Retrieve account key from ServiceManagementService
-------------------------------------------------------------------
Fri Jan 16 15:08:25 CET 2015 - ms@suse.de
- Update publish settings reader to schema v2.0
-------------------------------------------------------------------
Wed Jan 14 18:35:21 CET 2015 - ms@suse.de
- Added unit tests for ServiceAccount
-------------------------------------------------------------------
Wed Jan 14 18:03:23 CET 2015 - ms@suse.de
- Make use of publish settings file
-------------------------------------------------------------------
Tue Jan 13 16:33:59 CET 2015 - ms@suse.de
- Added image command
implemented service account handling and the list
command which prints the available os images for
the configured subscription
-------------------------------------------------------------------
Tue Jan 13 12:15:16 CET 2015 - ms@suse.de
- Added info message if detailed help is missing
-------------------------------------------------------------------
Mon Jan 12 17:28:00 CET 2015 - ms@suse.de
- Added disk command
Implemented disk image upload and removal
-------------------------------------------------------------------
Sun Jan 11 15:48:34 CET 2015 - ms@suse.de
- Document basic azure-cli behavior
-------------------------------------------------------------------
Wed Jan 7 17:45:03 CET 2015 - ms@suse.de
- Initial azure commandline tool interface
Start with a proposal for the azure-cli project including
tests based on nose, commandline parsing based on docopt
and an initial structure for implementing commands
View Git Blame Copy Permalink