# # spec file # # Copyright (c) 2022 SUSE LLC # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed # upon. The license for this file, and modifications and additions to the # file, is the same license as for the pristine package itself (unless the # license for the pristine package is not an Open Source License, in which # case the license is the MIT License). An "Open Source License" is a # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. # Please submit bugfixes or comments via https://bugs.opensuse.org/ # # !! IMPORTANT !! See README.PACKAGING before modifying package in any way #!ForceMultiversion %define _buildshell /bin/bash %define build_x86_firmware 0 %define build_ppc_firmware 0 %define build_opensbi_firmware 0 %define kvm_available 0 %define legacy_qemu_kvm 0 %define force_fit_virtio_pxe_rom 1 %if "%{?distribution}" == "" %define distro private-build %else %define distro %{distribution} %endif # So, we have openSUSE:Factory, and we have "ports". In openSUSE:Factory, we # have i586 and x86_64. In the :ARM port, we have aarch64, armv6l and armv7l. # In the :PowerPC port, we have ppc64, ppc and ppc64le. In the :zSystems port # we have s390x. And in the :RISCV we have riscv. # # Ideally, we'd want to build the firmwares at least once per port, and then # share the resulting packages among the arch-es within each port (check the # `ExportFilter` directives in the project config). # # Of course, we always build the "native fimrwares" (e.g., x86 firmwares on # x86_64, PPC firmwares on ppc64le, etc). But we also cross compile as much # firmwares as we can (e.g., both x86 and PPC firmwares on aarch64) so they'll # be available in as many ports as possible (as noarch packages). %ifarch x86_64 aarch64 %define build_ppc_firmware 1 # Currently, opensbi does not cross build cleanly on 15.3 and 15.4 %if ! 0%{?sle_version} %define build_opensbi_firmware 1 %endif %define build_x86_firmware 1 %endif %ifarch ppc64 ppc64le %define build_ppc_firmware 1 %if ! 0%{?sle_version} %define build_opensbi_firmware 1 %endif # FIXME: Try to enable cross building of x86 firmwares here on PPC %endif %ifarch riscv64 %define build_opensbi_firmware 1 %endif %ifarch %ix86 x86_64 ppc ppc64 ppc64le s390x armv7hl aarch64 %define kvm_available 1 %endif %ifarch %ix86 x86_64 s390x %define legacy_qemu_kvm 1 %endif %ifarch x86_64 aarch64 ppc64le s390x %define with_rbd 1 %endif %ifarch x86_64 ppc64le %define with_daxctl 1 %endif %ifarch %ix86 x86_64 %define with_uring 1 %define liburing_min_version 0.3 %endif # qemu, qemu-linux-user, and qemu-testsuite "flavors" are enabled via OBS Multibuild %global flavor @BUILD_FLAVOR@%{nil} %define name_suffix %{nil} %if "%flavor" == "testsuite" %define name_suffix -testsuite %endif %if "%flavor" == "linux-user" %define name_suffix -linux-user %define summary_string CPU emulator for user space %else %define summary_string Machine emulator and virtualizer %endif %bcond_with system_membarrier %define qemuver 6.2.0 %define srcver 6.2.0 %define sbver 1.15.0_0_g2dd4b9b %define srcname qemu Name: qemu%{name_suffix} URL: https://www.qemu.org/ Summary: %{summary_string} License: BSD-2-Clause AND BSD-3-Clause AND GPL-2.0-only AND GPL-2.0-or-later AND LGPL-2.1-or-later AND MIT Group: System/Emulators/PC Version: %qemuver Release: 0 Source: https://wiki.qemu.org/download/%{srcname}-%{srcver}.tar.xz Source99: https://wiki.qemu.org/download/%{srcname}-%{srcver}.tar.xz.sig Source100: %{srcname}.keyring Source1: 80-kvm.rules Source2: kvm.conf Source3: qemu-ifup Source4: bridge.conf Source5: qemu-kvm.1.gz Source6: ksm.service Source7: qemu-guest-agent.service Source8: 80-qemu-ga.rules Source9: qemu-supportconfig Source10: supported.arm.txt Source11: supported.ppc.txt Source12: supported.x86.txt Source13: supported.s390.txt Source14: 50-seabios-256k.json Source15: 60-seabios-128k.json Source200: qemu-rpmlintrc Source201: pkg-split.txt Source300: bundles.tar.xz Source301: update_git.sh Source302: config.sh Source303: README.PACKAGING # Upstream First -- https://wiki.qemu.org/Contribute/SubmitAPatch # This patch queue is auto-generated - see README.PACKAGING for process # Patches applied in base project: Patch00000: XXX-dont-dump-core-on-sigabort.patch Patch00001: qemu-binfmt-conf-Modify-default-path.patch Patch00002: qemu-cvs-gettimeofday.patch Patch00003: qemu-cvs-ioctl_debug.patch Patch00004: qemu-cvs-ioctl_nodirection.patch Patch00005: linux-user-add-binfmt-wrapper-for-argv-0.patch Patch00006: PPC-KVM-Disable-mmu-notifier-check.patch Patch00007: linux-user-binfmt-support-host-binaries.patch Patch00008: linux-user-Fake-proc-cpuinfo.patch Patch00009: linux-user-use-target_ulong.patch Patch00010: Make-char-muxer-more-robust-wrt-small-FI.patch Patch00011: linux-user-lseek-explicitly-cast-non-set.patch Patch00012: AIO-Reduce-number-of-threads-for-32bit-h.patch Patch00013: xen_disk-Add-suse-specific-flush-disable.patch Patch00014: qemu-bridge-helper-reduce-security-profi.patch Patch00015: roms-Makefile-pass-a-packaging-timestamp.patch Patch00016: Raise-soft-address-space-limit-to-hard-l.patch Patch00017: increase-x86_64-physical-bits-to-42.patch Patch00018: i8254-Fix-migration-from-SLE11-SP2.patch Patch00019: acpi_piix4-Fix-migration-from-SLE11-SP2.patch Patch00020: Make-installed-scripts-explicitly-python.patch Patch00021: hw-smbios-handle-both-file-formats-regar.patch Patch00022: xen-add-block-resize-support-for-xen-dis.patch Patch00023: tests-qemu-iotests-Triple-timeout-of-i-o.patch Patch00024: tests-Fix-block-tests-to-be-compatible-w.patch Patch00025: xen-ignore-live-parameter-from-xen-save-.patch Patch00026: tests-change-error-message-in-test-162.patch Patch00027: hw-intc-exynos4210_gic-provide-more-room.patch Patch00028: configure-only-populate-roms-if-softmmu.patch Patch00029: pc-bios-s390-ccw-net-avoid-warning-about.patch Patch00030: roms-change-cross-compiler-naming-to-be-.patch Patch00031: test-add-mapping-from-arch-of-i686-to-qe.patch Patch00032: configure-remove-pkgversion-from-CONFIG_.patch Patch00033: Revert-qht-constify-qht_statistics_init.patch Patch00034: qht-Revert-some-constification-in-qht.c.patch Patch00035: meson-install-ivshmem-client-and-ivshmem.patch Patch00036: Revert-roms-efirom-tests-uefi-test-tools.patch Patch00037: Makefile-Don-t-check-pc-bios-as-pre-requ.patch Patch00038: roms-Makefile-add-cross-file-to-qboot-me.patch Patch00039: usb-Help-compiler-out-to-avoid-a-warning.patch Patch00040: qom-handle-case-of-chardev-spice-module-.patch Patch00041: doc-add-our-support-doc-to-the-main-proj.patch Patch00042: qemu-binfmt-conf.sh-should-use-F-as-shor.patch Patch00043: modules-quick-fix-a-fundamental-error-in.patch Patch00044: scsi-generic-replace-logical-block-count.patch Patch00045: meson-build-all-modules-by-default.patch Patch00046: acpi-validate-hotplug-selector-on-access.patch Patch00047: tests-qemu-iotests-Fix-051-for-binaries-.patch Patch00048: iotests-MRCE-Write-data-to-source.patch Patch00049: iotests.py-img_info_log-rename-imgopts-a.patch Patch00050: iotests.py-implement-unsupported_imgopts.patch Patch00051: iotests-specify-some-unsupported_imgopts.patch Patch00052: iotests.py-qemu_img-create-support-IMGOP.patch Patch00053: iotests-drop-qemu_img_verbose-helper.patch Patch00054: iotests.py-rewrite-default-luks-support-.patch Patch00055: iotest-303-explicit-compression-type.patch Patch00056: iotest-065-explicit-compression-type.patch Patch00057: iotests.py-filter-out-successful-output-.patch Patch00058: iotest-302-use-img_info_log-helper.patch Patch00059: qcow2-simple-case-support-for-downgradin.patch Patch00060: iotests-common.rc-introduce-_qcow2_dump_.patch Patch00061: iotests-massive-use-_qcow2_dump_header.patch Patch00062: iotest-39-use-_qcow2_dump_header.patch Patch00063: iotests-bash-tests-filter-compression-ty.patch Patch00064: iotests-60-more-accurate-set-dirty-bit-i.patch Patch00065: iotest-214-explicit-compression-type.patch Patch00066: iotests-declare-lack-of-support-for-comp.patch Patch00067: block-backend-Retain-permissions-after-m.patch Patch00068: virtiofsd-Drop-membership-of-all-supplem.patch Patch00069: hw-scsi-megasas-check-for-NULL-frame-in-.patch Patch00070: hw-nvram-at24-return-0xff-if-1-byte-addr.patch Patch00071: hw-i386-amd_iommu-Fix-maybe-uninitialize.patch Patch00072: tools-virtiofsd-Add-rseq-syscall-to-the-.patch Patch00073: tests-qemu-iotests-040-Skip-TestCommitWi.patch Patch00074: tests-qemu-iotests-testrunner-Quote-case.patch Patch00075: Fix-the-module-building-problem-for-s390.patch Patch00076: scsi-generic-check-for-additional-SG_IO-.patch Patch00077: hw-nvme-fix-CVE-2021-3929.patch Patch00078: numa-Enable-numa-for-SGX-EPC-sections.patch Patch00079: numa-Support-SGX-numa-in-the-monitor-and.patch Patch00080: doc-Add-the-SGX-numa-description.patch Patch00081: python-aqmp-Fix-negotiation-with-pre-oob.patch Patch00082: python-machine-raise-VMLaunchFailure-exc.patch Patch00083: python-upgrade-mypy-to-0.780.patch Patch00084: Python-aqmp-fix-type-definitions-for-myp.patch Patch00085: python-aqmp-add-__del__-method-to-legacy.patch Patch00086: python-aqmp-copy-type-definitions-from-q.patch Patch00087: python-aqmp-handle-asyncio.TimeoutError-.patch Patch00088: python-aqmp-add-SocketAddrT-to-package-r.patch Patch00089: python-aqmp-fix-docstring-typo.patch Patch00090: python-aqmp-rename-AQMPError-to-QMPError.patch Patch00091: python-qmp-switch-qmp-shell-to-AQMP.patch Patch00092: python-aqmp-add-socket-bind-step-to-lega.patch Patch00093: python-move-qmp-utilities-to-python-qemu.patch Patch00094: python-move-qmp-shell-under-the-AQMP-pac.patch Patch00095: python-introduce-qmp-shell-wrap-convenie.patch Patch00096: python-support-recording-QMP-session-to-.patch Patch00097: python-aqmp-add-_session_guard.patch Patch00098: python-aqmp-rename-accept-to-start_serve.patch Patch00099: python-aqmp-remove-_new_session-and-_est.patch Patch00100: python-aqmp-split-_client_connected_cb-o.patch Patch00101: python-aqmp-squelch-pylint-warning-for-t.patch Patch00102: python-aqmp-refactor-_do_accept-into-two.patch Patch00103: python-aqmp-stop-the-server-during-disco.patch Patch00104: python-aqmp-add-start_server-and-accept-.patch Patch00105: python-aqmp-fix-race-condition-in-legacy.patch Patch00106: python-aqmp-drop-_bind_hack.patch # Patches applied in roms/seabios/: Patch01000: seabios-use-python2-explicitly-as-needed.patch Patch01001: seabios-switch-to-python3-as-needed.patch Patch01002: enable-cross-compilation-on-ARM.patch Patch01003: build-be-explicit-about-mx86-used-note-n.patch # Patches applied in roms/ipxe/: Patch02000: ath5k-Add-missing-AR5K_EEPROM_READ-in-at.patch Patch02001: stub-out-the-SAN-req-s-in-int13.patch Patch02002: ipxe-Makefile-fix-issues-of-build-reprod.patch Patch02003: help-compiler-out-by-initializing-array.patch Patch02004: Silence-GCC-12-spurious-warnings.patch # Patches applied in roms/sgabios/: Patch03000: sgabios-Makefile-fix-issues-of-build-rep.patch Patch03001: roms-sgabios-Fix-csum8-to-be-built-by-ho.patch # Patches applied in roms/edk2/: Patch04000: Ignore-spurious-GCC-12-warning.patch # Patches applied in roms/skiboot/: Patch05000: Makefile-define-endianess-for-cross-buil.patch # Patches applied in roms/qboot/: Patch11000: qboot-add-cross.ini-file-to-handle-aarch.patch # Patches applied in roms/opensbi/: Patch13000: Makefile-fix-build-with-binutils-2.38.patch # Patches applied in roms/edk2/BaseTools/Source/C/BrotliCompress/brotli/: Patch27000: brotli-fix-actual-variable-array-paramet.patch # Please do not add patches manually here. BuildRoot: %{_tmppath}/%{name}-%{version}-build # Common BuildRequires listed here: BuildRequires: fdupes BuildRequires: gcc-c++ BuildRequires: meson BuildRequires: ninja >= 1.7 BuildRequires: python3-base >= 3.6 BuildRequires: python3-setuptools %if "%{name}" == "qemu-linux-user" BuildRequires: glib2-devel-static >= 2.56 BuildRequires: glibc-devel-static BuildRequires: pcre-devel-static BuildRequires: zlib-devel-static # we must not install the qemu-linux-user package when under QEMU build %if 0%{?qemu_user_space_build:1} #!BuildIgnore: post-build-checks %endif %description QEMU provides CPU emulation along with other related capabilities. This package provides programs to run user space binaries and libraries meant for another architecture. The syscall interface is intercepted and execution below the syscall layer occurs on the native hardware and operating system. # above section is for qemu-linux-user # ------------------------------------------------------------------------ %else %if %{build_x86_firmware} BuildRequires: acpica BuildRequires: binutils-devel BuildRequires: dos2unix BuildRequires: glibc-devel-32bit BuildRequires: pkgconfig(liblzma) %ifnarch %ix86 x86_64 # We must cross-compile on non-x86* BuildRequires: cross-x86_64-binutils BuildRequires: cross-x86_64-gcc%gcc_version %endif %endif %if %{build_opensbi_firmware} %ifnarch riscv64 BuildRequires: cross-riscv64-binutils BuildRequires: cross-riscv64-gcc%gcc_version %endif %endif %if %{build_ppc_firmware} %ifnarch ppc64 ppc64le BuildRequires: cross-ppc64-binutils BuildRequires: cross-ppc64-gcc%gcc_version %endif %endif BuildRequires: bison BuildRequires: brlapi-devel BuildRequires: flex BuildRequires: libaio-devel BuildRequires: libattr-devel BuildRequires: libbz2-devel BuildRequires: libfdt-devel >= 1.4.2 BuildRequires: libgcrypt-devel >= 1.8.0 BuildRequires: pkgconfig(alsa) BuildRequires: pkgconfig(epoxy) BuildRequires: pkgconfig(gbm) BuildRequires: pkgconfig(glib-2.0) >= 2.56 BuildRequires: pkgconfig(glusterfs-api) >= 3 BuildRequires: pkgconfig(gnutls) >= 3.5.18 BuildRequires: pkgconfig(gtk+-3.0) >= 3.22 BuildRequires: pkgconfig(libcacard) >= 2.5.1 BuildRequires: pkgconfig(libcap-ng) BuildRequires: pkgconfig(libcurl) >= 7.29 BuildRequires: pkgconfig(libdrm) BuildRequires: pkgconfig(libiscsi) >= 1.9.0 BuildRequires: pkgconfig(libjpeg) BuildRequires: pkgconfig(libsasl2) %if 0%{?with_daxctl} BuildRequires: pkgconfig(libndctl) %endif BuildRequires: pkgconfig(libnfs) >= 1.9.3 %ifnarch %arm s390x BuildRequires: libnuma-devel %endif BuildRequires: pkgconfig(pixman-1) >= 0.21.8 %ifarch x86_64 BuildRequires: pkgconfig(libpmem) %endif BuildRequires: pkgconfig(jack) BuildRequires: pkgconfig(libpng) BuildRequires: pkgconfig(libpulse) %if 0%{?with_rbd} BuildRequires: librbd-devel %endif BuildRequires: Mesa-devel BuildRequires: pkgconfig(libseccomp) >= 2.3.0 BuildRequires: pkgconfig(libssh) >= 0.8.7 BuildRequires: pkgconfig(slirp) >= 4.2.0 BuildRequires: pkgconfig(spice-server) >= 0.12.5 %if 0%{?with_uring} BuildRequires: pkgconfig(liburing) >= %liburing_min_version %endif BuildRequires: lzfse-devel BuildRequires: multipath-tools-devel BuildRequires: pkgconfig BuildRequires: python3-Sphinx BuildRequires: rdma-core-devel BuildRequires: snappy-devel BuildRequires: pkgconfig(libudev) BuildRequires: pkgconfig(libusb-1.0) >= 1.0.13 BuildRequires: pkgconfig(lzo2) BuildRequires: pkgconfig(ncurses) BuildRequires: pkgconfig(spice-protocol) >= 0.12.3 BuildRequires: pkgconfig(systemd) BuildRequires: pkgconfig(vdeplug) BuildRequires: pkgconfig(xkbcommon) %{?systemd_ordering} %if %{kvm_available} BuildRequires: pkgconfig(udev) %endif BuildRequires: update-desktop-files BuildRequires: usbredir-devel >= 0.6 BuildRequires: pkgconfig(virglrenderer) >= 0.4.1 BuildRequires: pkgconfig(vte-2.91) %ifarch x86_64 BuildRequires: xen-devel >= 4.2 %endif BuildRequires: xfsprogs-devel BuildRequires: pkgconfig(libzstd) BuildRequires: pkgconfig(zlib) %if "%{name}" == "qemu" Requires: group(kvm) Requires: group(qemu) Requires: user(qemu) Requires(post): coreutils %if %{kvm_available} Requires(post): acl Requires(post): udev %ifarch s390x Requires(post): procps %endif %ifarch %ix86 x86_64 Requires: qemu-x86 %else Suggests: qemu-x86 %endif %ifarch ppc ppc64 ppc64le Requires: qemu-ppc %else Suggests: qemu-ppc %endif %ifarch s390x Requires: qemu-s390x %else Suggests: qemu-s390x %endif %ifarch %arm aarch64 Requires: qemu-arm %else Suggests: qemu-arm %endif Recommends: kvm_stat %endif Recommends: qemu-block-curl Recommends: qemu-ksm = %{qemuver} Recommends: qemu-tools Recommends: qemu-ui-curses %ifarch s390x Recommends: qemu-hw-s390x-virtio-gpu-ccw %else Recommends: qemu-hw-display-qxl Recommends: qemu-hw-display-virtio-gpu Recommends: qemu-hw-display-virtio-gpu-pci Recommends: qemu-hw-display-virtio-vga Recommends: qemu-hw-usb-host Recommends: qemu-hw-usb-redirect Recommends: qemu-hw-usb-smartcard Recommends: qemu-ui-gtk Recommends: qemu-ui-spice-app %endif Suggests: qemu-block-dmg Suggests: qemu-block-gluster Suggests: qemu-block-iscsi Suggests: qemu-block-nfs %if 0%{?with_rbd} Suggests: qemu-block-rbd %endif Suggests: qemu-block-ssh Suggests: qemu-chardev-baum Suggests: qemu-extra Suggests: qemu-skiboot Suggests: qemu-lang Suggests: qemu-microvm Suggests: qemu-vhost-user-gpu Suggests: qemu-accel-qtest Obsoletes: qemu-audio-oss < %{qemuver} Obsoletes: qemu-audio-sdl < %{qemuver} Obsoletes: qemu-ui-sdl < %{qemuver} %define generic_qemu_description QEMU provides full machine emulation and cross architecture usage. It closely\ integrates with KVM and Xen virtualization, allowing for excellent performance.\ Many options are available for defining the emulated environment, including\ traditional devices, direct host device access, and interfaces specific to\ virtualization. %description %{generic_qemu_description} This package acts as an umbrella package to the other QEMU sub-packages. %package x86 Summary: Machine emulator and virtualizer for x86 architectures Group: System/Emulators/PC Version: %{qemuver} Release: 0 Requires: %name = %{qemuver} Requires: qemu-accel-tcg-x86 Requires: qemu-ipxe Requires: qemu-seabios Requires: qemu-sgabios Requires: qemu-vgabios Recommends: ovmf Recommends: qemu-microvm Recommends: qemu-ovmf-x86_64 %description x86 %{generic_qemu_description} This package provides i386 and x86_64 emulation. %package ppc Summary: Machine emulator and virtualizer for Power architectures Group: System/Emulators/PC Version: %{qemuver} Release: 0 Requires: %name = %{qemuver} Requires: qemu-SLOF Recommends: qemu-ipxe Recommends: qemu-vgabios %description ppc %{generic_qemu_description} This package provides ppc and ppc64 emulation. %package s390x Summary: Machine emulator and virtualizer for S/390 architectures Group: System/Emulators/PC Version: %{qemuver} Release: 0 Requires: %name = %{qemuver} Provides: qemu-s390 = %{qemuver} Obsoletes: qemu-s390 < %{qemuver} %description s390x %{generic_qemu_description} This package provides s390x emulation. %package arm Summary: Machine emulator and virtualizer for ARM architectures Group: System/Emulators/PC Version: %{qemuver} Release: 0 Requires: %name = %{qemuver} Recommends: ovmf Recommends: qemu-ipxe Recommends: qemu-uefi-aarch64 Recommends: qemu-vgabios %description arm %{generic_qemu_description} This package provides arm emulation. %package extra Summary: Machine emulator and virtualizer for "extra" architectures Group: System/Emulators/PC Version: %{qemuver} Release: 0 Requires: %name = %{qemuver} Recommends: qemu-ipxe Recommends: qemu-skiboot Recommends: qemu-vgabios %description extra %{generic_qemu_description} This package provides some lesser used emulations, including alpha, m68k, mips, sparc, and xtensa. (The term "extra" is juxtapositioned against more popular QEMU packages which are dedicated to a single architecture.) %if %{legacy_qemu_kvm} %package kvm Summary: Wrapper to enable KVM acceleration under QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 %ifarch %ix86 x86_64 Requires: qemu-x86 = %{qemuver} %endif %ifarch s390x Requires: qemu-s390x = %{qemuver} %endif Provides: kvm = %{qemuver} Obsoletes: kvm < %{qemuver} %description kvm %{generic_qemu_description} This package provides a symlink to the main QEMU emulator used for KVM virtualization. The symlink is named qemu-kvm, which causes the QEMU program to enable the KVM accelerator, due to the name reference ending with 'kvm'. This package is an artifact of the early origins of QEMU, and is deprecated. %endif %package lang Summary: Translations for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 %description lang This package contains a few language translations, particularly for the graphical user interface components that come with QEMU. The bulk of strings in QEMU are not localized. # Modules need to match {qemu-system-*,qemu-img} version. # We cannot have qemu and qemu-tools require them in the right version, # as that would drag in the dependencies the modules are supposed to avoid. # Nor can we have modules require the right version of qemu and qemu-tools # as Xen reuses our qemu-tools but does not want our qemu and qemu-x86. %define qemu_module_conflicts \ Conflicts: %name < %{qemuver}-%{release} \ Conflicts: %name > %{qemuver}-%{release} \ Conflicts: qemu-tools < %{qemuver}-%{release} \ Conflicts: qemu-tools > %{qemuver}-%{release} %package audio-alsa Summary: ALSA based audio support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 %{qemu_module_conflicts} %description audio-alsa This package contains a module for ALSA based audio support for QEMU. %package audio-pa Summary: Pulse Audio based audio support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 %{qemu_module_conflicts} %description audio-pa This package contains a module for Pulse Audio based audio support for QEMU. %package audio-jack Summary: JACK based audio support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 %{qemu_module_conflicts} %description audio-jack This package contains a module for JACK based audio support for QEMU. %package audio-spice Summary: Spice based audio support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Provides: %name:%_datadir/%name/forsplits/05 Requires: qemu-ui-spice-core %{qemu_module_conflicts} %description audio-spice This package contains a module for Spice based audio support for QEMU. %package audio-oss Summary: OSS based audio support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 %{qemu_module_conflicts} %description audio-oss This package contains a module for OSS based audio support for QEMU. %package block-curl Summary: cURL block support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 %{qemu_module_conflicts} %description block-curl This package contains a module for accessing network-based image files over a network connection from qemu-img tool and QEMU system emulation. %package block-dmg Summary: DMG block support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 %{qemu_module_conflicts} %description block-dmg This package contains a module for accessing Mac OS X image files from qemu-img tool and QEMU system emulation. %package block-gluster Summary: GlusterFS block support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 %{qemu_module_conflicts} %description block-gluster This package contains a module for accessing network-based image files over a GlusterFS network connection from qemu-img tool and QEMU system emulation. %package block-iscsi Summary: iSCSI block support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 %{qemu_module_conflicts} %description block-iscsi This package contains a module for accessing network-based image files over an iSCSI network connection from qemu-img tool and QEMU system emulation. %package block-nfs Summary: direct Network File System support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 %{qemu_module_conflicts} %description block-nfs This package contains a module for directly accessing nfs based image files for QEMU. %if 0%{?with_rbd} %package block-rbd Summary: Rados Block Device (Ceph) support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 %{qemu_module_conflicts} %description block-rbd This package contains a module for accessing ceph (rbd,rados) image files for QEMU. %endif %package block-ssh Summary: SSH (SFTP) block support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 %{qemu_module_conflicts} %description block-ssh This package contains a module for accessing network-based image files over an SSH network connection from qemu-img tool and QEMU system emulation. %package chardev-baum Summary: Baum braille chardev support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Provides: %name:%_datadir/%name/forsplits/00 %{qemu_module_conflicts} %description chardev-baum This package contains a module for baum braille chardev support for QEMU. %package chardev-spice Summary: Spice vmc and port chardev support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Provides: %name:%_datadir/%name/forsplits/08 Requires: qemu-ui-spice-core %{qemu_module_conflicts} %description chardev-spice This package contains a module for Spice chardev support for QEMU. %package hw-display-qxl Summary: QXL display support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Provides: %name:%_datadir/%name/forsplits/01 Requires: qemu-ui-spice-core %{qemu_module_conflicts} %description hw-display-qxl This package contains a module for QXL display support for QEMU. %package hw-display-virtio-gpu Summary: Virtio GPU display support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Provides: %name:%_datadir/%name/forsplits/04 %{qemu_module_conflicts} %description hw-display-virtio-gpu This package contains a module for Virtio GPU display support for QEMU. %package hw-display-virtio-gpu-pci Summary: Virtio-gpu pci device for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Requires: qemu-hw-display-virtio-gpu Provides: %name:%_datadir/%name/forsplits/11 %{qemu_module_conflicts} %description hw-display-virtio-gpu-pci This package contains a module providing the virtio gpu pci device for QEMU. %package hw-display-virtio-vga Summary: Virtio vga device for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Provides: %name:%_datadir/%name/forsplits/12 %{qemu_module_conflicts} %description hw-display-virtio-vga This package contains a module providing the virtio vga device for QEMU. %package hw-s390x-virtio-gpu-ccw Summary: S390x virtio-gpu ccw device for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Requires: qemu-hw-display-virtio-gpu Provides: %name:%_datadir/%name/forsplits/13 %{qemu_module_conflicts} %description hw-s390x-virtio-gpu-ccw This package contains a module providing the s390x virtio gpu ccw device for QEMU. %package hw-usb-redirect Summary: USB redirection support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Provides: %name:%_datadir/%name/forsplits/02 %{qemu_module_conflicts} %description hw-usb-redirect This package contains a module for USB redirection support for QEMU. %package hw-usb-smartcard Summary: USB smartcard support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Provides: %name:%_datadir/%name/forsplits/03 %{qemu_module_conflicts} %description hw-usb-smartcard This package contains a modules for USB smartcard support for QEMU. %package hw-usb-host Summary: USB passthrough driver support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Provides: %name:%_datadir/%name/forsplits/14 %{qemu_module_conflicts} %description hw-usb-host This package contains a modules for USB passthrough driver for QEMU. %package ui-curses Summary: Curses based UI support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 %{qemu_module_conflicts} %description ui-curses This package contains a module for doing curses based UI for QEMU. %package ui-gtk Summary: GTK based UI support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Requires: qemu-ui-opengl %{qemu_module_conflicts} %description ui-gtk This package contains a module for doing GTK based UI for QEMU. %package ui-opengl Summary: OpenGL based UI support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Provides: %name:%_datadir/%name/forsplits/10 %{qemu_module_conflicts} %description ui-opengl This package contains a module for doing OpenGL based UI for QEMU. %package ui-spice-app Summary: Spice UI support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Requires: qemu-chardev-spice Requires: qemu-ui-spice-core %{qemu_module_conflicts} %description ui-spice-app This package contains a module for doing Spice based UI for QEMU. %package ui-spice-core Summary: Core Spice support for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Provides: %name:%_datadir/%name/forsplits/09 Requires: qemu-ui-opengl # This next Requires is only since virt-manager expects audio support Requires: qemu-audio-spice %{qemu_module_conflicts} %description ui-spice-core This package contains a module with core Spice support for QEMU. %package vhost-user-gpu Summary: Vhost user mode virtio-gpu 2D/3D rendering backend for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 %{qemu_module_conflicts} %description vhost-user-gpu This package contains a vhost user mode virtio-gpu 2D/3D rendering backend for QEMU. %package tools Summary: Tools for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Requires(pre): permissions Requires: group(kvm) Recommends: multipath-tools Recommends: qemu-block-curl %if 0%{?with_rbd} Recommends: qemu-block-rbd %endif %description tools This package contains various QEMU related tools, including a bridge helper, a virtfs helper, ivshmem, disk utilities and scripts for various purposes. %package ivshmem-tools Summary: Inter-VM Shared Memory Tools for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Provides: %name:%_datadir/%name/forsplits/07 %description ivshmem-tools This package contains a sample shared memory client and server which utilize QEMU's Inter-VM shared memory device as specified by the ivshmem client-server protocol specification documented in docs/specs/ivshmem-spec.txt in QEMU source code. %package guest-agent Summary: Guest agent for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Requires: group(kvm) Requires(post): udev Supplements: modalias(acpi*:QEMU0002%3A*) Supplements: modalias(pci:v00005853d00000001sv*sd*bc*sc*i*) Supplements: modalias(pci:v0000FFFDd00000101sv*sd*bc*sc*i*) %{?systemd_ordering} %description guest-agent This package contains the QEMU guest agent. It is installed in the linux guest to provide information and control at the guest OS level. %if %{build_x86_firmware} %package microvm Summary: x86 MicroVM firmware for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 BuildArch: noarch %description microvm This package provides minimal x86 firmware for booting certain guests under QEMU. qboot provides the minimum resources needed to boot PVH and bzImages. bios-microvm, created from a minimal seabios configuration, provides slightly wider support than qboot, but still focuses on quick boot up. %package seabios Summary: x86 Legacy BIOS for QEMU Group: System/Emulators/PC Version: %{sbver} Release: 0 BuildArch: noarch Conflicts: %name < 1.6.0 %description seabios SeaBIOS is an open source implementation of a 16bit x86 BIOS. SeaBIOS is the default and legacy BIOS for QEMU. %package vgabios Summary: VGA BIOSes for QEMU Group: System/Emulators/PC Version: %{sbver} Release: 0 BuildArch: noarch Conflicts: %name < 1.6.0 %description vgabios VGABIOS provides the video ROM BIOSes for the following variants of VGA emulated devices: Std VGA, QXL, Cirrus CLGD 5446 and VMware emulated video card. For use with QEMU. %package sgabios Summary: Serial Graphics Adapter BIOS for QEMU Group: System/Emulators/PC Version: 8 Release: 0 BuildArch: noarch Conflicts: %name < 1.6.0 %description sgabios The Google Serial Graphics Adapter BIOS or SGABIOS provides a means for legacy x86 software to communicate with an attached serial console as if a video card were attached. For use with QEMU. %package ipxe Summary: PXE ROMs for QEMU NICs Group: System/Emulators/PC Version: 1.0.0+ Release: 0 BuildArch: noarch Conflicts: %name < 1.6.0 %description ipxe Provides Preboot Execution Environment (PXE) ROM support for various emulated network adapters available with QEMU. %endif %if %{build_ppc_firmware} %package skiboot Summary: OPAL firmware (aka skiboot), used in booting OpenPOWER systems Group: System/Emulators/PC Version: %{qemuver} Release: 0 BuildArch: noarch Requires(post): update-alternatives Requires(postun):update-alternatives Provides: %name:%_datadir/%name/forsplits/06 %description skiboot Provides OPAL (OpenPower Abstraction Layer) firmware, aka skiboot, as traditionally packaged with QEMU. %package SLOF Summary: Slimline Open Firmware - SLOF Group: System/Emulators/PC Version: %{qemuver} Release: 0 BuildArch: noarch %description SLOF Slimline Open Firmware (SLOF) is an implementation of the IEEE 1275 standard. It can be used as partition firmware for pSeries machines running on QEMU or KVM. %endif %package ksm Summary: Kernel Samepage Merging services Group: System/Emulators/PC Version: %{qemuver} Release: 0 Requires(pre): coreutils Requires(post): coreutils %description ksm Kernel Samepage Merging (KSM) is a memory-saving de-duplication feature, that merges anonymous (private) pages (not pagecache ones). This package provides a service file for starting and stopping KSM. %package accel-tcg-x86 Summary: TCG accelerator for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Provides: %name:%_datadir/%name/forsplits/15 %{qemu_module_conflicts} %description accel-tcg-x86 TCG is the QEMU binary translator, responsible for converting from target to host instruction set. This package provides the TCG accelerator for QEMU. %package accel-qtest Summary: QTest accelerator for QEMU Group: System/Emulators/PC Version: %{qemuver} Release: 0 Provides: %name:%_datadir/%name/forsplits/16 %{qemu_module_conflicts} %description accel-qtest QTest is a device emulation testing framework. It is useful to test device models. This package provides QTest accelerator for testing QEMU. # above section is for qemu %else BuildRequires: bc BuildRequires: qemu-arm = %{qemuver} BuildRequires: qemu-audio-alsa = %{qemuver} BuildRequires: qemu-audio-jack = %{qemuver} BuildRequires: qemu-audio-oss = %{qemuver} BuildRequires: qemu-audio-pa = %{qemuver} BuildRequires: qemu-audio-spice = %{qemuver} BuildRequires: qemu-block-curl = %{qemuver} BuildRequires: qemu-block-dmg = %{qemuver} BuildRequires: qemu-block-gluster = %{qemuver} BuildRequires: qemu-block-iscsi = %{qemuver} BuildRequires: qemu-block-nfs = %{qemuver} %if 0%{?with_rbd} BuildRequires: qemu-block-rbd = %{qemuver} %endif BuildRequires: qemu-accel-qtest = %{qemuver} BuildRequires: qemu-accel-tcg-x86 = %{qemuver} BuildRequires: qemu-block-ssh = %{qemuver} BuildRequires: qemu-chardev-baum = %{qemuver} BuildRequires: qemu-chardev-spice = %{qemuver} BuildRequires: qemu-extra = %{qemuver} BuildRequires: qemu-guest-agent = %{qemuver} BuildRequires: qemu-hw-display-qxl = %{qemuver} BuildRequires: qemu-hw-display-virtio-gpu = %{qemuver} BuildRequires: qemu-hw-usb-host = %{qemuver} BuildRequires: qemu-hw-usb-redirect = %{qemuver} BuildRequires: qemu-hw-usb-smartcard = %{qemuver} BuildRequires: qemu-ipxe = 1.0.0+ BuildRequires: qemu-ivshmem-tools = %{qemuver} BuildRequires: qemu-ksm = %{qemuver} BuildRequires: qemu-lang = %{qemuver} BuildRequires: qemu-ppc = %{qemuver} BuildRequires: qemu-s390x = %{qemuver} BuildRequires: qemu-seabios = %{sbver} BuildRequires: qemu-sgabios = 8 BuildRequires: qemu-skiboot = %{qemuver} BuildRequires: qemu-tools = %{qemuver} BuildRequires: qemu-ui-curses = %{qemuver} BuildRequires: qemu-ui-gtk = %{qemuver} BuildRequires: qemu-ui-opengl = %{qemuver} BuildRequires: qemu-ui-spice-app = %{qemuver} BuildRequires: qemu-ui-spice-core = %{qemuver} BuildRequires: qemu-vgabios = %{sbver} BuildRequires: qemu-x86 = %{qemuver} %description This package records qemu testsuite results and represents successful testing. # above section is for qemu-testsuite %endif # above section is for qemu and qemu-testsuite %endif # ======================================================================== %prep %setup -q -n %{srcname}-%{expand:%%(SV=%{srcver};echo ${SV%%%%+git*})} %patch00000 -p1 %patch00001 -p1 %patch00002 -p1 %patch00003 -p1 %patch00004 -p1 %patch00005 -p1 %patch00006 -p1 %patch00007 -p1 %patch00008 -p1 %patch00009 -p1 %patch00010 -p1 %patch00011 -p1 %patch00012 -p1 %patch00013 -p1 %patch00014 -p1 %patch00015 -p1 %patch00016 -p1 %patch00017 -p1 %patch00018 -p1 %patch00019 -p1 %patch00020 -p1 %patch00021 -p1 %patch00022 -p1 %patch00023 -p1 %patch00024 -p1 %patch00025 -p1 %patch00026 -p1 %patch00027 -p1 %patch00028 -p1 %patch00029 -p1 %patch00030 -p1 %patch00031 -p1 %patch00032 -p1 %patch00033 -p1 %patch00034 -p1 %patch00035 -p1 %patch00036 -p1 %patch00037 -p1 %ifarch aarch64 %patch00038 -p1 %endif %ifarch %arm %ix86 ppc %patch00039 -p1 %endif %patch00040 -p1 %if %{legacy_qemu_kvm} %patch00041 -p1 %endif %patch00042 -p1 %patch00043 -p1 %patch00044 -p1 %patch00045 -p1 %patch00046 -p1 %patch00047 -p1 %patch00048 -p1 %patch00049 -p1 %patch00050 -p1 %patch00051 -p1 %patch00052 -p1 %patch00053 -p1 %patch00054 -p1 %patch00055 -p1 %patch00056 -p1 %patch00057 -p1 %patch00058 -p1 %patch00059 -p1 %patch00060 -p1 %patch00061 -p1 %patch00062 -p1 %patch00063 -p1 %patch00064 -p1 %patch00065 -p1 %patch00066 -p1 %patch00067 -p1 %patch00068 -p1 %patch00069 -p1 %patch00070 -p1 %patch00071 -p1 %patch00072 -p1 %patch00073 -p1 %patch00074 -p1 %patch00075 -p1 %patch00076 -p1 %patch00077 -p1 %patch00078 -p1 %patch00079 -p1 %patch00080 -p1 %patch00081 -p1 %patch00082 -p1 %patch00083 -p1 %patch00084 -p1 %patch00085 -p1 %patch00086 -p1 %patch00087 -p1 %patch00088 -p1 %patch00089 -p1 %patch00090 -p1 %patch00091 -p1 %patch00092 -p1 %patch00093 -p1 %patch00094 -p1 %patch00095 -p1 %patch00096 -p1 %patch00097 -p1 %patch00098 -p1 %patch00099 -p1 %patch00100 -p1 %patch00101 -p1 %patch00102 -p1 %patch00103 -p1 %patch00104 -p1 %patch00105 -p1 %patch00106 -p1 %patch01000 -p1 %patch01001 -p1 %patch01002 -p1 %patch01003 -p1 %patch02000 -p1 %if 0%{?patch-possibly-applied-elsewhere} %patch02001 -p1 %endif %patch02002 -p1 %patch02003 -p1 %patch02004 -p1 %patch03000 -p1 %patch03001 -p1 %patch04000 -p1 %patch05000 -p1 %patch11000 -p1 %patch13000 -p1 %patch27000 -p1 %if "%{name}" != "qemu-linux-user" # for the record, this set of firmware files is installed, but we don't # build (yet): bamboo.dtb canyonlands.dtb hppa-firmware.img openbios-ppc # openbios-sparc32 openbios-sparc64 palcode-clipper petalogix-ml605.dtb # petalogix-s3adsp1800.dtb QEMU,cgthree.bin QEMU,tcx.bin qemu_vga.ndrv # u-boot.e500 u-boot-sam460-20100605.bin opensbi-riscv32-generic-fw_dynamic.bin # opensbi-riscv32-generic-fw_dynamic.elfnpcm7xx_bootrom.bin # Note that: # - default firmwares are built "by default", i.e., they're built automatically # during the process of building QEMU (on each specific arch) # - extra firmwares are built "manually" (see below) from their own sources # (which, typically, are submodules checked out in the {srcdi}r/roms directory) %define ppc_default_firmware %{nil} %define ppc_extra_firmware {skiboot.lid slof.bin} %define riscv64_default_firmware %{nil} %define riscv64_extra_firmware {opensbi-riscv64-generic-fw_dynamic.bin \ opensbi-riscv64-generic-fw_dynamic.elf} %define s390x_default_firmware {s390-ccw.img s390-netboot.img} %define s390x_extra_firmware %{nil} %define x86_default_firmware {linuxboot.bin linuxboot_dma.bin multiboot.bin \ multiboot_dma.bin kvmvapic.bin pvh.bin} %define x86_extra_firmware {bios.bin bios-256k.bin bios-microvm.bin qboot.rom \ pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom pxe-pcnet.rom pxe-rtl8139.rom \ pxe-virtio.rom sgabios.bin vgabios-ati.bin vgabios-bochs-display.bin \ vgabios.bin vgabios-cirrus.bin vgabios-qxl.bin vgabios-ramfb.bin \ vgabios-stdvga.bin vgabios-virtio.bin vgabios-vmware.bin \ efi-e1000.rom efi-e1000e.rom efi-eepro100.rom efi-ne2k_pci.rom efi-pcnet.rom \ efi-rtl8139.rom efi-virtio.rom efi-vmxnet3.rom} # Complete list of all the firmwares that we build, if we consider # all the builds, on all the arches. %define firmware { \ %{ppc_default_firmware} %{ppc_extra_firmware} \ %{riscv64_default_firmware} %{riscv64_extra_firmware} \ %{s390x_default_firmware} %{s390x_extra_firmware} \ %{x86_default_firmware} %{x86_extra_firmware} } # Note that: # - {arch}_default_built_firmware are the firmwares that we will be built by # default in this particular build, on the arch where we currently are on # - {arch}_extra_built_fimrware, likewise, but for extra firmwares, built manually %ifarch ppc64 ppc64le %define ppc_default_built_firmware %{ppc_default_firmware} %endif %ifarch riscv64 %define riscv64_default_built_firmware %{riscv64_default_firmware} %endif %ifarch s390x %define s390x_default_built_firmware %{s390x_default_firmware} %endif %ifarch %ix86 x86_64 %define x86_default_built_firmware %{x86_default_firmware} %endif %if %{build_opensbi_firmware} %define riscv64_extra_built_firmware %{riscv64_extra_firmware} %endif %if %{build_ppc_firmware} %define ppc_extra_built_firmware %{ppc_extra_firmware} %endif %if %{build_x86_firmware} %define x86_extra_built_firmware %{x86_extra_firmware} %endif # List of only firmwares that will actually be built, in this instance %define built_firmware { \ %{?ppc_default_built_firmware} %{?ppc_extra_built_firmware} \ %{?riscv64_default_built_firmware} %{?riscv64_extra_built_firmware} \ %{?s390x_default_built_firmware} %{?s390x_extra_built_firmware} \ %{?x86_default_built_firmware} %{?x86_extra_built_firmware} } # above section is for qemu and qemu-testsuite %endif # ======================================================================== %build # non-x86 archs still seem to have some issues with Link Time Optimization %ifnarch %ix86 x86_64 %define _lto_cflags %{nil} %endif %if %{legacy_qemu_kvm} %ifarch s390x cp %{SOURCE13} docs/supported.rst %else cp %{SOURCE13} docs/supported.rst %endif %endif %define srcdir %{_builddir}/%buildsubdir %define blddir %srcdir/build mkdir -p %blddir cd %blddir %srcdir/configure \ --prefix=%_prefix \ --sysconfdir=%_sysconfdir \ --libdir=%_libdir \ --libexecdir=%_libexecdir \ --localstatedir=%_localstatedir \ --docdir=%_docdir \ --firmwarepath=%_datadir/%name \ --python=%_bindir/python3 \ --extra-cflags="%{optflags}" \ --with-git-submodules=ignore \ --disable-fuzzing \ --disable-multiprocess \ --disable-stack-protector \ --disable-strip \ --disable-tcg-interpreter \ %if "%{_lto_cflags}" != "%{nil}" --enable-lto \ %endif %if "%flavor" != "testsuite" --disable-qom-cast-debug \ %endif --with-git-submodules=ignore \ %if "%{name}" != "qemu-linux-user" --with-pkgversion="%(echo '%{distro}' | sed 's/ (.*)//')" \ --with-default-devices \ --enable-system --disable-linux-user \ --enable-tools --enable-guest-agent \ --enable-modules \ --disable-module-upgrades \ --enable-slirp=system \ --enable-pie \ --enable-docs \ --enable-attr \ --disable-auth-pam \ --enable-bochs \ --enable-brlapi \ --enable-bzip2 \ --enable-cap-ng \ --disable-capstone \ --enable-cloop \ --enable-coroutine-pool \ --disable-crypto-afalg \ --enable-curl \ --enable-curses \ --enable-dmg \ --enable-fdt \ --enable-gio \ --enable-gcrypt \ --enable-glusterfs \ --enable-gnutls \ --enable-gtk \ --disable-hax \ --disable-hvf \ --enable-iconv \ %if %{kvm_available} --enable-kvm \ %else --disable-kvm \ %endif %if 0%{?with_daxctl} --enable-libdaxctl \ %else --disable-libdaxctl \ %endif --enable-libiscsi \ --enable-libnfs \ %ifarch x86_64 --enable-libpmem \ %else --disable-libpmem \ %endif --enable-libssh \ --enable-libusb \ --disable-libxml2 \ --enable-linux-aio \ %if 0%{?with_uring} --enable-linux-io-uring \ %else --disable-linux-io-uring \ %endif --enable-lzfse \ --enable-lzo \ --disable-malloc-trim \ %if %{with system_membarrier} --enable-membarrier \ %else --disable-membarrier \ %endif --enable-mpath \ --disable-netmap \ --disable-nettle \ %ifarch %arm s390x --disable-numa \ %else --enable-numa \ %endif --enable-opengl \ --enable-parallels \ --disable-plugins \ --enable-pvrdma \ --enable-qcow1 \ --enable-qed \ %if 0%{?with_rbd} --enable-rbd \ %else --disable-rbd \ %endif --enable-rdma \ --enable-replication \ --disable-safe-stack \ --disable-sanitizers \ --disable-sdl \ --disable-sdl-image \ --enable-seccomp \ --enable-smartcard \ --enable-snappy \ --enable-spice \ --enable-tpm \ --enable-usb-redir \ --enable-vde \ --enable-vdi \ --enable-vhost-crypto \ --enable-vhost-kernel \ --enable-vhost-net \ --enable-vhost-scsi \ --enable-vhost-user \ --enable-vhost-user-blk-server \ --enable-vhost-user-fs \ --enable-vhost-vdpa \ --enable-vhost-vsock \ --enable-virglrenderer \ --enable-virtfs \ --enable-vnc \ --enable-vnc-jpeg \ --enable-vnc-png \ --enable-vnc-sasl \ --enable-vte \ --enable-vvfat \ --enable-werror \ --disable-whpx \ --enable-zstd \ %ifarch x86_64 --enable-xen \ --enable-xen-pci-passthrough \ %else --disable-xen \ %endif --enable-xfsctl \ --enable-xkbcommon \ # above section is for qemu and qemu-testsuite # ------------------------------------------------------------------------ %else --without-default-devices \ --disable-system --enable-linux-user \ --disable-tools --disable-guest-agent \ --static \ --disable-modules \ --disable-pie \ --disable-docs \ --disable-blobs \ --disable-bochs \ --disable-capstone \ --disable-cloop \ --enable-coroutine-pool \ --disable-dmg \ --disable-fdt \ --disable-gio \ --disable-iconv \ --disable-kvm \ --disable-libdaxctl \ --disable-linux-io-uring \ --disable-malloc-trim \ %if %{with system_membarrier} --enable-membarrier \ %else --disable-membarrier \ %endif --disable-parallels \ --disable-plugins \ --disable-qcow1 \ --disable-qed \ --disable-replication \ --disable-safe-stack \ --disable-slirp \ --disable-tpm \ --disable-vdi \ --disable-vhost-crypto \ --disable-vhost-kernel \ --disable-vhost-net \ --disable-vhost-scsi \ --disable-vhost-user \ --disable-vhost-user-blk-server \ --disable-vhost-user-fs \ --disable-vhost-vsock \ --disable-vnc \ --disable-vvfat \ --disable-xkbcommon \ # above section is for qemu-linux-user %endif %if "%{name}" == "qemu" # Let's build QEMU (and all the "default" firmwares, for each arch) # First, delete the firmware files that we intend to build... for i in %built_firmware do unlink %srcdir/pc-bios/$i done %make_build # ... And then, reinstate the firmwares that have been built already for i in %{?s390x_default_built_firmware} do cp pc-bios/s390-ccw/$i %srcdir/pc-bios/ done for i in %{?x86_default_built_firmware} do cp pc-bios/optionrom/$i %srcdir/pc-bios/ done # Build the "extra" firmwares. Note that the QEMU Makefile in {srcdir}/roms # does some cross-compiler auto detection. So we often don't need to define # or pass CROSS= and CROSS_COMPILE ourselves. %if %{build_ppc_firmware} # FIXME: check if we can upstream: Makefile-define-endianess-for-cross-buil.patch %make_build -C %srcdir/roms skiboot %make_build -C %srcdir/roms slof %endif %if %{build_opensbi_firmware} %make_build -C %srcdir/roms opensbi64-generic %endif %if %{build_x86_firmware} %make_build %{?_smp_mflags} -C %srcdir/roms bios \ SEABIOS_EXTRAVERSION="-rebuilt.opensuse.org" \ # FIXME: check if we can upstream: roms-Makefile-add-cross-file-to-qboot-me.patch # and qboot-add-cross.ini-file-to-handle-aarch.patch %make_build -C %srcdir/roms qboot %make_build -C %srcdir/roms seavgabios \ %make_build -C %srcdir/roms seavgabios-ati \ %make_build -C %srcdir/roms pxerom %make_build -C %srcdir/roms efirom \ EDK2_BASETOOLS_OPTFLAGS='-fPIE' # We're currently not building firmware on ix86, but let's make sure this works # fine if one enables it, e.g., locally (for debugging or something). # FIXME: check if we can get rid or upstream: roms-sgabios-Fix-csum8-to-be-built-by-ho.patch make -C %srcdir/roms sgabios HOSTCC=cc \ %ifnarch %ix86 x86_64 CC=x86_64-suse-linux-gcc LD=x86_64-suse-linux-ld \ %endif %if %{force_fit_virtio_pxe_rom} pushd %srcdir patch -p1 < %_sourcedir/stub-out-the-SAN-req-s-in-int13.patch popd %make_build -C %srcdir/roms pxerom_variants=virtio pxerom_targets=1af41000 pxerom %endif # enforce pxe rom sizes for migration compatability from SLE 11 SP3 forward # the following need to be > 64K %define supported_nics_large {e1000 rtl8139} # the following need to be <= 64K %define supported_nics_small {virtio} # Though not required, make unsupported pxe roms migration compatable as well %define unsupported_nics {eepro100 ne2k_pci pcnet} for i in %supported_nics_large %unsupported_nics do if test "`stat -c '%s' %srcdir/pc-bios/pxe-$i.rom`" -gt "131072" ; then echo "pxe rom is too large" exit 1 fi if test "`stat -c '%s' %srcdir/pc-bios/pxe-$i.rom`" -le "65536" ; then ./%srcdir/roms/ipxe/src/util/padimg.pl %srcdir/pc-bios/pxe-$i.rom -s 65536 -b 255 echo -ne "SEGMENT OVERAGE\0" >> %srcdir/pc-bios/pxe-$i.rom fi done for i in %supported_nics_small do if test "`stat -c '%s' %srcdir/pc-bios/pxe-$i.rom`" -gt "65536" ; then echo "pxe rom is too large" exit 1 fi done %endif # End of {build_x86_firmware} %endif # End of "{name}" == "qemu" # ------------------------------------------------------------------------ %if "%{name}" == "qemu-testsuite" # XXX: What's the point of all this, if we need to rebuild everything anyway?!? ln -s %_bindir/qemu-img qemu-img ln -s %_bindir/qemu-ga qemu-ga ln -s %_bindir/qemu-io qemu-io ln -s %_bindir/elf2map elf2map ln -s %_bindir/qemu-nbd qemu-nbd ln -s %_bindir/qemu-edid qemu-edid ln -s %_bindir/qemu-keymap qemu-keymap ln -s %_bindir/ivshmem-client ivshmem-client ln -s %_bindir/ivshmem-server ivshmem-server ln -s %_bindir/qemu-pr-helper qemu-pr-helper ln -s %_libexecdir/virtfs-proxy-helper fsdev/virtfs-proxy-helper for i in %firmware do unlink pc-bios/$i ln -s %_datadir/qemu/$i pc-bios/$i done for conf in %{_builddir}/%buildsubdir/configs/targets/*-softmmu.mak; do arch=`echo "$conf" | sed -e 's|%{_builddir}/%buildsubdir/configs/targets/\(.*\)-softmmu.mak|\1|g'` if $(unlink $arch-softmmu/qemu-system-$arch); then ln -s %_bindir/qemu-system-$arch $arch-softmmu/qemu-system-$arch fi done # Compile the QOM test binary first, so that ... %make_build tests/qtest/qom-test V=1 # ... make comes in fresh and has lots of address space (needed for 32bit, bsc#957379) %make_build check-report.tap V=1 %endif # ------------------------------------------------------------------------ %if "%{name}" == "qemu-linux-user" %make_build %ifarch %ix86 %define qemu_arch i386 %endif %ifarch x86_64 %define qemu_arch x86_64 %endif %ifarch %arm %define qemu_arch arm %endif %ifarch aarch64 %define qemu_arch aarch64 %endif %ifarch ppc %define qemu_arch ppc %endif %ifarch ppc64 %define qemu_arch ppc64 %endif %ifarch ppc64le %define qemu_arch ppc64le %endif %ifarch s390x %define qemu_arch s390x %endif %endif # ======================================================================== %check cd %blddir %if "%{name}" == "qemu-testsuite" export QEMU_PROG=%_bindir/qemu-system-x86_64 export QEMU_IMG_PROG=%_bindir/qemu-img export QEMU_IO_PROG=%_bindir/qemu-io export QEMU_NBD_PROG=%_bindir/qemu-nbd %make_build check-block V=1 %endif # ------------------------------------------------------------------------ %if "%{name}" == "qemu-linux-user" %ifarch %ix86 x86_64 %arm aarch64 ppc ppc64 ppc64le s390x %ifnarch %arm %{qemu_arch}-linux-user/qemu-%{qemu_arch} %_bindir/ls > /dev/null %endif %make_build check-softfloat %endif %endif # ======================================================================== %install cd %blddir %if "%{name}" == "qemu-testsuite" install -D -m 0644 check-report.tap %{buildroot}%_datadir/qemu/check-report.tap %endif # ------------------------------------------------------------------------ %if "%{name}" == "qemu-linux-user" %make_build install DESTDIR=%{buildroot} rm -rf %{buildroot}%_datadir/qemu/keymaps unlink %{buildroot}%_datadir/qemu/trace-events-all install -d -m 755 %{buildroot}%_sbindir install -m 755 scripts/qemu-binfmt-conf.sh %{buildroot}%_sbindir ln -s qemu-binfmt %{buildroot}%_bindir/qemu-aarch64-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-aarch64_be-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-alpha-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-arm-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-armeb-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-cris-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-hexagon-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-hppa-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-i386-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-m68k-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-microblaze-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-microblazeel-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-mips-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-mips64-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-mips64el-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-mipsel-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-mipsn32-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-mipsn32el-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-nios2-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-or1k-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-ppc-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-ppc64-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-ppc64le-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-riscv32-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-riscv64-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-s390x-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-sh4-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-sh4eb-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-sparc-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-sparc32plus-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-sparc64-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-x86_64-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-xtensa-binfmt ln -s qemu-binfmt %{buildroot}%_bindir/qemu-xtensaeb-binfmt %fdupes -s %{buildroot} %endif # ------------------------------------------------------------------------ %if "%{name}" == "qemu" %make_build install DESTDIR=%{buildroot} %find_lang %name install -d -m 0755 %{buildroot}%_datadir/%name/firmware install -d -m 0755 %{buildroot}/usr/lib/supportconfig/plugins install -d -m 0755 %{buildroot}%_sysconfdir/%name/firmware install -D -m 0644 %{SOURCE4} %{buildroot}%_sysconfdir/%name/bridge.conf install -D -m 0755 %{SOURCE3} %{buildroot}%_datadir/%name/qemu-ifup install -D -p -m 0644 %{SOURCE8} %{buildroot}/usr/lib/udev/rules.d/80-qemu-ga.rules install -D -m 0755 scripts/analyze-migration.py %{buildroot}%_bindir/analyze-migration.py install -D -m 0755 scripts/vmstate-static-checker.py %{buildroot}%_bindir/vmstate-static-checker.py install -D -m 0755 scripts/kvm/vmxcap %{buildroot}%_bindir/vmxcap install -D -m 0755 %{SOURCE9} %{buildroot}/usr/lib/supportconfig/plugins/%name install -D -m 0644 %{SOURCE10} %{buildroot}%_docdir/qemu-arm/supported.txt install -D -m 0644 %{SOURCE11} %{buildroot}%_docdir/qemu-ppc/supported.txt install -D -m 0644 %{SOURCE12} %{buildroot}%_docdir/qemu-x86/supported.txt install -D -m 0644 %{SOURCE13} %{buildroot}%_docdir/qemu-s390x/supported.txt %if %{legacy_qemu_kvm} install -D -m 0644 %{SOURCE5} %{buildroot}%_mandir/man1/qemu-kvm.1.gz install -d %{buildroot}%_docdir/qemu-kvm %ifarch s390x ln -s qemu-system-s390x %{buildroot}%_bindir/qemu-kvm ln -s ../qemu-s390x/supported.txt %{buildroot}%_docdir/qemu-kvm/kvm-supported.txt rst2html --exit-status=2 %{buildroot}%_docdir/qemu-s390x/supported.txt %{buildroot}%_docdir/qemu-kvm/kvm-supported.html %else ln -s qemu-system-x86_64 %{buildroot}%_bindir/qemu-kvm ln -s ../qemu-x86/supported.txt %{buildroot}%_docdir/qemu-kvm/kvm-supported.txt rst2html --exit-status=2 %{buildroot}%_docdir/qemu-x86/supported.txt %{buildroot}%_docdir/qemu-kvm/kvm-supported.html %endif %endif %if %{kvm_available} install -D -m 0644 %{SOURCE1} %{buildroot}/usr/lib/udev/rules.d/80-kvm.rules %endif install -D -p -m 0644 %{SOURCE7} %{buildroot}%{_unitdir}/qemu-guest-agent.service install -D -p -m 0644 %{SOURCE6} %{buildroot}%{_unitdir}/ksm.service %ifarch s390x install -D -m 0644 %{SOURCE2} %{buildroot}%{_prefix}/lib/modules-load.d/kvm.conf %endif # We rely on a separate project / package to provide edk2 firmware unlink %{buildroot}%_datadir/%name/edk2-licenses.txt unlink %{buildroot}%_datadir/%name/firmware/50-edk2-i386-secure.json unlink %{buildroot}%_datadir/%name/firmware/50-edk2-x86_64-secure.json unlink %{buildroot}%_datadir/%name/firmware/60-edk2-aarch64.json unlink %{buildroot}%_datadir/%name/firmware/60-edk2-arm.json unlink %{buildroot}%_datadir/%name/firmware/60-edk2-i386.json unlink %{buildroot}%_datadir/%name/firmware/60-edk2-x86_64.json unlink %{buildroot}%_datadir/%name/edk2-aarch64-code.fd unlink %{buildroot}%_datadir/%name/edk2-arm-code.fd unlink %{buildroot}%_datadir/%name/edk2-arm-vars.fd unlink %{buildroot}%_datadir/%name/edk2-i386-code.fd unlink %{buildroot}%_datadir/%name/edk2-i386-secure-code.fd unlink %{buildroot}%_datadir/%name/edk2-i386-vars.fd unlink %{buildroot}%_datadir/%name/edk2-x86_64-code.fd unlink %{buildroot}%_datadir/%name/edk2-x86_64-secure-code.fd # this was never meant for customer consumption - delete even though installed unlink %{buildroot}%_bindir/elf2dmp install -D -m 0644 %{SOURCE201} %{buildroot}%_datadir/%name/forsplits/pkg-split.txt for X in 00 01 02 03 04 05 07 08 09 10 11 12 13 14 15 16 17 18 19 do ln -s pkg-split.txt %{buildroot}%_datadir/%name/forsplits/$X done # For PPC and x86 firmwares, there are a few extra install steps necessary. # In general, if we know that we have not built a firmware, remove it from the # install base, as the one that we have there is the upstream binary, that got # copied there during `make install`. %if %{build_ppc_firmware} # in support of update-alternatives mv %{buildroot}%_datadir/%name/skiboot.lid %{buildroot}%_datadir/%name/skiboot.lid.qemu # create a dummy target for /etc/alternatives/skiboot.lid mkdir -p %{buildroot}%{_sysconfdir}/alternatives ln -s -f %{_sysconfdir}/alternatives/skiboot.lid %{buildroot}%{_datadir}/%name/skiboot.lid ln -s pkg-split.txt %{buildroot}%_datadir/%name/forsplits/06 %else for f in %{ppc_extra_firmware} ; do unlink %{buildroot}%_datadir/%name/$f done %endif # For riscv64 firmwares (currently, only opensbi), we leave them there in # any case, because they're part of the qemu-extra package, and riscv is # a bit special in many ways already. %if %{build_x86_firmware} install -D -m 0644 %{SOURCE14} %{buildroot}%_datadir/%name/firmware/50-seabios-256k.json install -D -m 0644 %{SOURCE15} %{buildroot}%_datadir/%name/firmware/60-seabios-128k.json %else for f in %{x86_extra_firmware} ; do unlink %{buildroot}%_datadir/%name/$f done %endif %suse_update_desktop_file qemu %fdupes -s %{buildroot} # ======================================================================== %if %{kvm_available} %post # Do not execute operations affecting host devices while running in a chroot if [ $(stat -L -c "%i" /proc/1/root/) = $(stat -L -c "%i" /) ]; then setfacl --remove-all /dev/kvm &> /dev/null || : %ifarch s390x if [ -c /dev/kvm ]; then %_bindir/chmod 0666 /dev/kvm %_bindir/chgrp kvm /dev/kvm fi %endif %udev_rules_update %_bindir/udevadm trigger -y kvm || : %ifarch s390x sysctl vm.allocate_pgste=1 || : %endif fi %endif %post tools %set_permissions %_libexecdir/qemu-bridge-helper %verifyscript tools %verify_permissions %_libexecdir/qemu-bridge-helper %pre guest-agent %service_add_pre qemu-guest-agent.service %post guest-agent %service_add_post qemu-guest-agent.service if [ -e /dev/virtio-ports/org.qemu.guest_agent.0 ]; then /usr/bin/systemctl start qemu-guest-agent.service || : fi %preun guest-agent if [ -e /dev/virtio-ports/org.qemu.guest_agent.0 ]; then /usr/bin/systemctl stop qemu-guest-agent.service || : fi %postun guest-agent %service_del_postun_without_restart qemu-guest-agent.service if [ "$1" = "1" ] ; then if [ -e /dev/virtio-ports/org.qemu.guest_agent.0 ]; then /usr/bin/systemctl restart qemu-guest-agent.service || : fi fi %pre ksm %service_add_pre ksm.service %post ksm %service_add_post ksm.service %preun ksm %service_del_preun ksm.service %postun ksm %service_del_postun ksm.service %if %{build_ppc_firmware} %post skiboot update-alternatives --install \ %{_datadir}/%name/skiboot.lid skiboot.lid %{_datadir}/%name/skiboot.lid.qemu 15 %preun skiboot if [ ! -f %{_datadir}/%name/skiboot.lid.qemu ] ; then update-alternatives --remove skiboot.lid %{_datadir}/%name/skiboot.lid.qemu fi %endif # above section is for qemu %endif # ======================================================================== %files %defattr(-, root, root) %doc README.rst VERSION %license COPYING COPYING.LIB LICENSE %if "%{name}" == "qemu" %dir %_datadir/icons/hicolor %dir %_datadir/icons/hicolor/*/ %dir %_datadir/icons/hicolor/*/apps %_datadir/applications/qemu.desktop %_datadir/icons/hicolor/16x16/apps/qemu.png %_datadir/icons/hicolor/24x24/apps/qemu.png %_datadir/icons/hicolor/32x32/apps/qemu.bmp %_datadir/icons/hicolor/32x32/apps/qemu.png %_datadir/icons/hicolor/48x48/apps/qemu.png %_datadir/icons/hicolor/64x64/apps/qemu.png %_datadir/icons/hicolor/128x128/apps/qemu.png %_datadir/icons/hicolor/256x256/apps/qemu.png %_datadir/icons/hicolor/512x512/apps/qemu.png %_datadir/icons/hicolor/scalable/apps/qemu.svg %dir %_datadir/%name %dir %_datadir/%name/firmware %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/17 %_datadir/%name/forsplits/18 %_datadir/%name/forsplits/19 %_datadir/%name/forsplits/pkg-split.txt %_datadir/%name/keymaps %_datadir/%name/qemu-ifup %_datadir/%name/qemu-nsis.bmp %_datadir/%name/trace-events-all %dir %_datadir/%name/vhost-user %_datadir/%name/vhost-user/50-qemu-virtiofsd.json %doc %_docdir/%name/_static %dir %_docdir/%name/about %dir %_docdir/%name/devel %dir %_docdir/%name/interop %dir %_docdir/%name/specs %dir %_docdir/%name/system %dir %_docdir/%name/system/arm %dir %_docdir/%name/system/devices %dir %_docdir/%name/system/i386 %dir %_docdir/%name/system/ppc %dir %_docdir/%name/system/riscv %dir %_docdir/%name/system/s390x %dir %_docdir/%name/tools %dir %_docdir/%name/user %_docdir/%name/.buildinfo %if %{legacy_qemu_kvm} %_docdir/%name/supported.html %endif %_docdir/%name/about/build-platforms.html %_docdir/%name/about/deprecated.html %_docdir/%name/about/index.html %_docdir/%name/about/license.html %_docdir/%name/about/removed-features.html %_docdir/%name/devel/atomics.html %_docdir/%name/devel/bitops.html %_docdir/%name/devel/block-coroutine-wrapper.html %_docdir/%name/devel/build-system.html %_docdir/%name/devel/ci.html %_docdir/%name/devel/clocks.html %_docdir/%name/devel/code-of-conduct.html %_docdir/%name/devel/conflict-resolution.html %_docdir/%name/devel/control-flow-integrity.html %_docdir/%name/devel/decodetree.html %_docdir/%name/devel/ebpf_rss.html %_docdir/%name/devel/fuzzing.html %_docdir/%name/devel/index.html %_docdir/%name/devel/kconfig.html %_docdir/%name/devel/loads-stores.html %_docdir/%name/devel/memory.html %_docdir/%name/devel/migration.html %_docdir/%name/devel/modules.html %_docdir/%name/devel/multi-process.html %_docdir/%name/devel/multi-thread-tcg.html %_docdir/%name/devel/qapi-code-gen.html %_docdir/%name/devel/qgraph.html %_docdir/%name/devel/qom.html %_docdir/%name/devel/qtest.html %_docdir/%name/devel/reset.html %_docdir/%name/devel/s390-dasd-ipl.html %_docdir/%name/devel/secure-coding-practices.html %_docdir/%name/devel/stable-process.html %_docdir/%name/devel/style.html %_docdir/%name/devel/submitting-a-patch.html %_docdir/%name/devel/submitting-a-patch.html %_docdir/%name/devel/submitting-a-pull-request.html %_docdir/%name/devel/submitting-a-pull-request.html %_docdir/%name/devel/tcg-icount.html %_docdir/%name/devel/tcg-plugins.html %_docdir/%name/devel/tcg.html %_docdir/%name/devel/testing.html %_docdir/%name/devel/tracing.html %_docdir/%name/devel/trivial-patches.html %_docdir/%name/devel/trivial-patches.html %_docdir/%name/devel/ui.html %_docdir/%name/devel/vfio-migration.html %_docdir/%name/devel/writing-monitor-commands.html %_docdir/%name/genindex.html %_docdir/%name/index.html %_docdir/%name/interop/barrier.html %_docdir/%name/interop/bitmaps.html %_docdir/%name/interop/dbus-vmstate.html %_docdir/%name/interop/dbus.html %_docdir/%name/interop/index.html %_docdir/%name/interop/live-block-operations.html %_docdir/%name/interop/pr-helper.html %_docdir/%name/interop/qemu-ga-ref.html %_docdir/%name/interop/qemu-qmp-ref.html %_docdir/%name/interop/qemu-storage-daemon-qmp-ref.html %_docdir/%name/interop/vhost-user-gpu.html %_docdir/%name/interop/vhost-user.html %_docdir/%name/interop/vhost-vdpa.html %_docdir/%name/objects.inv %_docdir/%name/search.html %_docdir/%name/searchindex.js %_docdir/%name/specs/acpi_cpu_hotplug.html %_docdir/%name/specs/acpi_hest_ghes.html %_docdir/%name/specs/acpi_hw_reduced_hotplug.html %_docdir/%name/specs/acpi_mem_hotplug.html %_docdir/%name/specs/acpi_nvdimm.html %_docdir/%name/specs/acpi_pci_hotplug.html %_docdir/%name/specs/index.html %_docdir/%name/specs/ppc-spapr-numa.html %_docdir/%name/specs/ppc-spapr-xive.html %_docdir/%name/specs/ppc-xive.html %_docdir/%name/specs/tpm.html %_docdir/%name/system/arm/aspeed.html %_docdir/%name/system/arm/collie.html %_docdir/%name/system/arm/cpu-features.html %_docdir/%name/system/arm/cubieboard.html %_docdir/%name/system/arm/digic.html %_docdir/%name/system/arm/emcraft-sf2.html %_docdir/%name/system/arm/emulation.html %_docdir/%name/system/arm/gumstix.html %_docdir/%name/system/arm/highbank.html %_docdir/%name/system/arm/imx25-pdk.html %_docdir/%name/system/arm/integratorcp.html %_docdir/%name/system/arm/kzm.html %_docdir/%name/system/arm/mainstone.html %_docdir/%name/system/arm/mps2.html %_docdir/%name/system/arm/musca.html %_docdir/%name/system/arm/musicpal.html %_docdir/%name/system/arm/nrf.html %_docdir/%name/system/arm/nseries.html %_docdir/%name/system/arm/nuvoton.html %_docdir/%name/system/arm/orangepi.html %_docdir/%name/system/arm/palm.html %_docdir/%name/system/arm/raspi.html %_docdir/%name/system/arm/realview.html %_docdir/%name/system/arm/sabrelite.html %_docdir/%name/system/arm/sbsa.html %_docdir/%name/system/arm/stellaris.html %_docdir/%name/system/arm/stm32.html %_docdir/%name/system/arm/sx1.html %_docdir/%name/system/arm/versatile.html %_docdir/%name/system/arm/vexpress.html %_docdir/%name/system/arm/virt.html %_docdir/%name/system/arm/xlnx-versal-virt.html %_docdir/%name/system/arm/xscale.html %_docdir/%name/system/authz.html %_docdir/%name/system/barrier.html %_docdir/%name/system/bootindex.html %_docdir/%name/system/cpu-hotplug.html %_docdir/%name/system/device-emulation.html %_docdir/%name/system/devices/ivshmem.html %_docdir/%name/system/devices/net.html %_docdir/%name/system/devices/nvme.html %_docdir/%name/system/devices/usb.html %_docdir/%name/system/devices/vhost-user-rng.html %_docdir/%name/system/devices/vhost-user.html %_docdir/%name/system/devices/virtio-pmem.html %_docdir/%name/system/gdb.html %_docdir/%name/system/generic-loader.html %_docdir/%name/system/guest-loader.html %_docdir/%name/system/i386/cpu.html %_docdir/%name/system/i386/kvm-pv.html %_docdir/%name/system/i386/microvm.html %_docdir/%name/system/i386/pc.html %_docdir/%name/system/i386/sgx.html %_docdir/%name/system/images.html %_docdir/%name/system/index.html %_docdir/%name/system/invocation.html %_docdir/%name/system/keys.html %_docdir/%name/system/linuxboot.html %_docdir/%name/system/managed-startup.html %_docdir/%name/system/monitor.html %_docdir/%name/system/multi-process.html %_docdir/%name/system/mux-chardev.html %_docdir/%name/system/ppc/embedded.html %_docdir/%name/system/ppc/powermac.html %_docdir/%name/system/ppc/powernv.html %_docdir/%name/system/ppc/ppce500.html %_docdir/%name/system/ppc/prep.html %_docdir/%name/system/ppc/pseries.html %_docdir/%name/system/pr-manager.html %_docdir/%name/system/qemu-block-drivers.html %_docdir/%name/system/qemu-cpu-models.html %_docdir/%name/system/qemu-manpage.html %_docdir/%name/system/quickstart.html %_docdir/%name/system/riscv/microchip-icicle-kit.html %_docdir/%name/system/riscv/shakti-c.html %_docdir/%name/system/riscv/sifive_u.html %_docdir/%name/system/riscv/virt.html %_docdir/%name/system/s390x/3270.html %_docdir/%name/system/s390x/bootdevices.html %_docdir/%name/system/s390x/css.html %_docdir/%name/system/s390x/protvirt.html %_docdir/%name/system/s390x/vfio-ap.html %_docdir/%name/system/s390x/vfio-ccw.html %_docdir/%name/system/secrets.html %_docdir/%name/system/security.html %_docdir/%name/system/target-arm.html %_docdir/%name/system/target-avr.html %_docdir/%name/system/target-i386.html %_docdir/%name/system/target-m68k.html %_docdir/%name/system/target-mips.html %_docdir/%name/system/target-ppc.html %_docdir/%name/system/target-riscv.html %_docdir/%name/system/target-rx.html %_docdir/%name/system/target-s390x.html %_docdir/%name/system/target-sparc.html %_docdir/%name/system/target-sparc64.html %_docdir/%name/system/target-xtensa.html %_docdir/%name/system/targets.html %_docdir/%name/system/tls.html %_docdir/%name/system/virtio-net-failover.html %_docdir/%name/system/vnc-security.html %_docdir/%name/tools/index.html %_docdir/%name/tools/qemu-img.html %_docdir/%name/tools/qemu-nbd.html %_docdir/%name/tools/qemu-pr-helper.html %_docdir/%name/tools/qemu-storage-daemon.html %_docdir/%name/tools/qemu-trace-stap.html %_docdir/%name/tools/virtfs-proxy-helper.html %_docdir/%name/tools/virtiofsd.html %_docdir/%name/user/index.html %_docdir/%name/user/main.html %_mandir/man1/%name.1.gz %_mandir/man1/qemu-storage-daemon.1.gz %_mandir/man1/virtiofsd.1.gz %_mandir/man7/qemu-block-drivers.7.gz %_mandir/man7/qemu-cpu-models.7.gz %_mandir/man7/qemu-qmp-ref.7.gz %_mandir/man7/qemu-ga-ref.7.gz %_mandir/man7/qemu-storage-daemon-qmp-ref.7.gz %dir %_sysconfdir/%name %dir %_sysconfdir/%name/firmware %dir /usr/lib/supportconfig %dir /usr/lib/supportconfig/plugins /usr/lib/supportconfig/plugins/%name %if %{kvm_available} %ifarch s390x %{_prefix}/lib/modules-load.d/kvm.conf %endif /usr/lib/udev/rules.d/80-kvm.rules %endif %files x86 %defattr(-, root, root) %_bindir/qemu-system-i386 %_bindir/qemu-system-x86_64 %_datadir/%name/kvmvapic.bin %_datadir/%name/linuxboot.bin %_datadir/%name/linuxboot_dma.bin %_datadir/%name/multiboot.bin %_datadir/%name/multiboot_dma.bin %_datadir/%name/pvh.bin %dir %_docdir/qemu-x86 %_docdir/qemu-x86/supported.txt %files ppc %defattr(-, root, root) %_bindir/qemu-system-ppc %_bindir/qemu-system-ppc64 %_datadir/%name/bamboo.dtb %_datadir/%name/canyonlands.dtb %_datadir/%name/openbios-ppc %_datadir/%name/qemu_vga.ndrv %_datadir/%name/u-boot.e500 %_datadir/%name/u-boot-sam460-20100605.bin %dir %_docdir/qemu-ppc %_docdir/qemu-ppc/supported.txt %files s390x %defattr(-, root, root) %_bindir/qemu-system-s390x %_datadir/%name/s390-ccw.img %_datadir/%name/s390-netboot.img %dir %_docdir/qemu-s390x %_docdir/qemu-s390x/supported.txt %files arm %defattr(-, root, root) %_bindir/qemu-system-arm %_bindir/qemu-system-aarch64 %_datadir/%name/npcm7xx_bootrom.bin %dir %_docdir/qemu-arm %_docdir/qemu-arm/supported.txt %files extra %defattr(-, root, root) %_bindir/qemu-system-alpha %_bindir/qemu-system-avr %_bindir/qemu-system-cris %_bindir/qemu-system-hppa %_bindir/qemu-system-m68k %_bindir/qemu-system-microblaze %_bindir/qemu-system-microblazeel %_bindir/qemu-system-mips %_bindir/qemu-system-mipsel %_bindir/qemu-system-mips64 %_bindir/qemu-system-mips64el %_bindir/qemu-system-nios2 %_bindir/qemu-system-or1k %_bindir/qemu-system-riscv32 %_bindir/qemu-system-riscv64 %_bindir/qemu-system-rx %_bindir/qemu-system-sh4 %_bindir/qemu-system-sh4eb %_bindir/qemu-system-sparc %_bindir/qemu-system-sparc64 %_bindir/qemu-system-tricore %_bindir/qemu-system-xtensa %_bindir/qemu-system-xtensaeb %_datadir/%name/hppa-firmware.img %_datadir/%name/openbios-sparc32 %_datadir/%name/openbios-sparc64 %_datadir/%name/opensbi-riscv32-generic-fw_dynamic.bin %_datadir/%name/opensbi-riscv32-generic-fw_dynamic.elf %_datadir/%name/opensbi-riscv64-generic-fw_dynamic.bin %_datadir/%name/opensbi-riscv64-generic-fw_dynamic.elf %_datadir/%name/palcode-clipper %_datadir/%name/petalogix-ml605.dtb %_datadir/%name/petalogix-s3adsp1800.dtb %_datadir/%name/QEMU,cgthree.bin %_datadir/%name/QEMU,tcx.bin %if %{legacy_qemu_kvm} %files kvm %defattr(-,root,root) %_bindir/qemu-kvm %dir %_docdir/qemu-kvm %_docdir/qemu-kvm/kvm-supported.html %_docdir/qemu-kvm/kvm-supported.txt %_mandir/man1/qemu-kvm.1.gz %endif %files audio-alsa %defattr(-, root, root) %dir %_libdir/%name %_libdir/%name/audio-alsa.so %files audio-pa %defattr(-, root, root) %dir %_libdir/%name %_libdir/%name/audio-pa.so %files audio-jack %defattr(-, root, root) %dir %_libdir/%name %_libdir/%name/audio-jack.so %files audio-spice %defattr(-, root, root) %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/05 %dir %_libdir/%name %_libdir/%name/audio-spice.so %files audio-oss %defattr(-, root, root) %dir %_libdir/%name %_libdir/%name/audio-oss.so %files block-curl %defattr(-, root, root) %dir %_libdir/%name %_libdir/%name/block-curl.so %files block-dmg %defattr(-, root, root) %dir %_libdir/%name %_libdir/%name/block-dmg-bz2.so %_libdir/%name/block-dmg-lzfse.so %files block-gluster %defattr(-, root, root) %dir %_libdir/%name %_libdir/%name/block-gluster.so %files block-iscsi %defattr(-, root, root) %dir %_libdir/%name %_libdir/%name/block-iscsi.so %files block-nfs %defattr(-, root, root) %dir %_libdir/%name %_libdir/%name/block-nfs.so %if 0%{?with_rbd} %files block-rbd %defattr(-, root, root) %dir %_libdir/%name %_libdir/%name/block-rbd.so %endif %files block-ssh %defattr(-, root, root) %dir %_libdir/%name %_libdir/%name/block-ssh.so %files chardev-baum %defattr(-, root, root) %dir %_datadir/%name %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/00 %dir %_libdir/%name %_libdir/%name/chardev-baum.so %files chardev-spice %defattr(-, root, root) %dir %_datadir/%name %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/08 %dir %_libdir/%name %_libdir/%name/chardev-spice.so %files hw-display-qxl %defattr(-, root, root) %dir %_datadir/%name %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/01 %dir %_libdir/%name %_libdir/%name/hw-display-qxl.so %files hw-display-virtio-gpu %defattr(-, root, root) %dir %_datadir/%name %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/04 %_libdir/%name/hw-display-virtio-gpu.so %_libdir/%name/hw-display-virtio-gpu-gl.so %files hw-display-virtio-gpu-pci %defattr(-, root, root) %dir %_datadir/%name %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/11 %dir %_libdir/%name %_libdir/%name/hw-display-virtio-gpu-pci.so %_libdir/%name/hw-display-virtio-gpu-pci-gl.so %files hw-display-virtio-vga %defattr(-, root, root) %dir %_datadir/%name %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/12 %dir %_libdir/%name %_libdir/%name/hw-display-virtio-vga.so %_libdir/%name/hw-display-virtio-vga-gl.so %files hw-s390x-virtio-gpu-ccw %defattr(-, root, root) %dir %_datadir/%name %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/13 %dir %_libdir/%name %_libdir/%name/hw-s390x-virtio-gpu-ccw.so %files hw-usb-redirect %defattr(-, root, root) %dir %_datadir/%name %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/02 %dir %_libdir/%name %_libdir/%name/hw-usb-redirect.so %files hw-usb-smartcard %defattr(-, root, root) %dir %_datadir/%name %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/03 %dir %_libdir/%name %_libdir/%name/hw-usb-smartcard.so %files hw-usb-host %defattr(-, root, root) %dir %_datadir/%name %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/14 %dir %_libdir/%name %_libdir/%name/hw-usb-host.so %files ui-curses %defattr(-, root, root) %dir %_libdir/%name %_libdir/%name/ui-curses.so %files ui-gtk %defattr(-, root, root) %dir %_libdir/%name %_libdir/%name/ui-gtk.so %files ui-opengl %defattr(-, root, root) %dir %_datadir/%name %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/10 %dir %_libdir/%name %_libdir/%name/ui-egl-headless.so %_libdir/%name/ui-opengl.so %files ui-spice-core %defattr(-, root, root) %dir %_datadir/%name %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/09 %dir %_libdir/%name %_libdir/%name/ui-spice-core.so %files ui-spice-app %defattr(-, root, root) %dir %_libdir/%name %_libdir/%name/ui-spice-app.so %files lang -f %blddir/%name.lang %defattr(-, root, root) %if %{build_x86_firmware} %files seabios %defattr(-, root, root) %dir %_datadir/%name %_datadir/%name/bios.bin %_datadir/%name/bios-256k.bin %_datadir/%name/firmware/50-seabios-256k.json %_datadir/%name/firmware/60-seabios-128k.json %files microvm %defattr(-, root, root) %dir %_datadir/%name %_datadir/%name/bios-microvm.bin %_datadir/%name/qboot.rom %files vgabios %defattr(-, root, root) %dir %_datadir/%name %_datadir/%name/vgabios.bin %_datadir/%name/vgabios-ati.bin %_datadir/%name/vgabios-bochs-display.bin %_datadir/%name/vgabios-cirrus.bin %_datadir/%name/vgabios-qxl.bin %_datadir/%name/vgabios-ramfb.bin %_datadir/%name/vgabios-stdvga.bin %_datadir/%name/vgabios-virtio.bin %_datadir/%name/vgabios-vmware.bin %files sgabios %defattr(-, root, root) %dir %_datadir/%name %_datadir/%name/sgabios.bin %files ipxe %defattr(-, root, root) %dir %_datadir/%name %_datadir/%name/efi-e1000.rom %_datadir/%name/efi-e1000e.rom %_datadir/%name/efi-eepro100.rom %_datadir/%name/efi-ne2k_pci.rom %_datadir/%name/efi-pcnet.rom %_datadir/%name/efi-rtl8139.rom %_datadir/%name/efi-virtio.rom %_datadir/%name/efi-vmxnet3.rom %_datadir/%name/pxe-e1000.rom %_datadir/%name/pxe-eepro100.rom %_datadir/%name/pxe-ne2k_pci.rom %_datadir/%name/pxe-pcnet.rom %_datadir/%name/pxe-rtl8139.rom %_datadir/%name/pxe-virtio.rom %endif %if %{build_ppc_firmware} %files skiboot %defattr(-, root, root) %dir %_datadir/%name %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/06 %_datadir/%name/skiboot.lid %_datadir/%name/skiboot.lid.qemu %ghost %_sysconfdir/alternatives/skiboot.lid %files SLOF %defattr(-, root, root) %dir %_datadir/%name %_datadir/%name/slof.bin %endif %files vhost-user-gpu %defattr(-, root, root) %dir %_datadir/%name/vhost-user %_datadir/%name/vhost-user/50-qemu-gpu.json %_libexecdir/vhost-user-gpu %files tools %defattr(-, root, root) %_bindir/analyze-migration.py %_bindir/qemu-edid %_bindir/qemu-img %_bindir/qemu-io %_bindir/qemu-keymap %_bindir/qemu-nbd %_bindir/qemu-pr-helper %_bindir/qemu-storage-daemon %_bindir/vmstate-static-checker.py %_bindir/vmxcap %verify(not mode) %attr(4750,root,kvm) %_libexecdir/qemu-bridge-helper %_libexecdir/virtfs-proxy-helper %_libexecdir/virtiofsd %_mandir/man1/qemu-img.1.gz %_mandir/man1/virtfs-proxy-helper.1.gz %_mandir/man8/qemu-nbd.8.gz %_mandir/man8/qemu-pr-helper.8.gz %dir %_sysconfdir/%name %config %_sysconfdir/%name/bridge.conf %files ivshmem-tools %defattr(-, root, root) %dir %_datadir/%name %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/07 %_bindir/ivshmem-client %_bindir/ivshmem-server %files guest-agent %defattr(-, root, root) %attr(0755,root,kvm) %_bindir/qemu-ga %dir %_docdir/%name/interop %_docdir/%name/interop/qemu-ga.html %_mandir/man8/qemu-ga.8.gz %{_unitdir}/qemu-guest-agent.service /usr/lib/udev/rules.d/80-qemu-ga.rules %files ksm %defattr(-, root, root) %{_unitdir}/ksm.service %files accel-tcg-x86 %defattr(-, root, root) %dir %_datadir/%name %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/15 %dir %_libdir/%name %_libdir/%name/accel-tcg-i386.so %_libdir/%name/accel-tcg-x86_64.so %files accel-qtest %defattr(-, root, root) %dir %_datadir/%name %dir %_datadir/%name/forsplits %_datadir/%name/forsplits/16 %dir %_libdir/%name %_libdir/%name/accel-qtest-aarch64.so %_libdir/%name/accel-qtest-alpha.so %_libdir/%name/accel-qtest-arm.so %_libdir/%name/accel-qtest-avr.so %_libdir/%name/accel-qtest-cris.so %_libdir/%name/accel-qtest-hppa.so %_libdir/%name/accel-qtest-i386.so %_libdir/%name/accel-qtest-m68k.so %_libdir/%name/accel-qtest-microblaze.so %_libdir/%name/accel-qtest-microblazeel.so %_libdir/%name/accel-qtest-mips.so %_libdir/%name/accel-qtest-mips64.so %_libdir/%name/accel-qtest-mips64el.so %_libdir/%name/accel-qtest-mipsel.so %_libdir/%name/accel-qtest-nios2.so %_libdir/%name/accel-qtest-or1k.so %_libdir/%name/accel-qtest-ppc.so %_libdir/%name/accel-qtest-ppc64.so %_libdir/%name/accel-qtest-riscv32.so %_libdir/%name/accel-qtest-riscv64.so %_libdir/%name/accel-qtest-rx.so %_libdir/%name/accel-qtest-s390x.so %_libdir/%name/accel-qtest-sh4.so %_libdir/%name/accel-qtest-sh4eb.so %_libdir/%name/accel-qtest-sparc.so %_libdir/%name/accel-qtest-sparc64.so %_libdir/%name/accel-qtest-tricore.so %_libdir/%name/accel-qtest-x86_64.so %_libdir/%name/accel-qtest-xtensa.so %_libdir/%name/accel-qtest-xtensaeb.so # above section is for qemu %endif # ------------------------------------------------------------------------ %if "%{name}" == "qemu-linux-user" %_bindir/qemu-aarch64 %_bindir/qemu-aarch64_be %_bindir/qemu-alpha %_bindir/qemu-arm %_bindir/qemu-armeb %_bindir/qemu-cris %_bindir/qemu-hexagon %_bindir/qemu-hppa %_bindir/qemu-i386 %_bindir/qemu-m68k %_bindir/qemu-microblaze %_bindir/qemu-microblazeel %_bindir/qemu-mips %_bindir/qemu-mips64 %_bindir/qemu-mips64el %_bindir/qemu-mipsel %_bindir/qemu-mipsn32 %_bindir/qemu-mipsn32el %_bindir/qemu-nios2 %_bindir/qemu-or1k %_bindir/qemu-ppc %_bindir/qemu-ppc64 %_bindir/qemu-ppc64le %_bindir/qemu-riscv32 %_bindir/qemu-riscv64 %_bindir/qemu-s390x %_bindir/qemu-sh4 %_bindir/qemu-sh4eb %_bindir/qemu-sparc %_bindir/qemu-sparc32plus %_bindir/qemu-sparc64 %_bindir/qemu-x86_64 %_bindir/qemu-xtensa %_bindir/qemu-xtensaeb %_bindir/qemu-binfmt %_bindir/qemu-*-binfmt %_sbindir/qemu-binfmt-conf.sh %endif # ------------------------------------------------------------------------ %if "%{name}" == "qemu-testsuite" %_datadir/qemu/check-report.tap %endif %changelog