Dario Faggioli
3014c841a2
- Update to version 9.0.2: Full list of backports here: https://lore.kernel.org/qemu-devel/1718081053.366429.1238758.nullmailer@tls.msk.ru/ A selection of them is reported here too: hw/nvme: fix number of PIDs for FDP RUH update sphinx/qapidoc: Fix to generate doc for explicit, unboxed arguments char-stdio: Restore blocking mode of stdout on exit virtio: remove virtio_tswap16s() call in vring_packed_event_read() virtio-pci: Fix the failure process in kvm_virtio_pci_vector_use_one() tcg/optimize: Fix TCG_COND_TST* simplification of setcond2 block: Parse filenames only when explicitly requested iotests/270: Don't store data-file with json: prefix in image iotests/244: Don't store data-file with protocol in image qcow2: Don't open data_file with BDRV_O_NO_IO tests: add testing of parameter=3D1 for SMP topology (bsc#1228169) hw/core: allow parameter=3D1 for SMP topology on any machine ... OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=851
2057 lines
59 KiB
RPMSpec
2057 lines
59 KiB
RPMSpec
#
|
|
# spec file for package qemu
|
|
#
|
|
# Copyright (c) 2024 SUSE LLC
|
|
#
|
|
# All modifications and additions to the file contributed by third parties
|
|
# remain the property of their copyright owners, unless otherwise agreed
|
|
# upon. The license for this file, and modifications and additions to the
|
|
# file, is the same license as for the pristine package itself (unless the
|
|
# license for the pristine package is not an Open Source License, in which
|
|
# case the license is the MIT License). An "Open Source License" is a
|
|
# license that conforms to the Open Source Definition (Version 1.9)
|
|
# published by the Open Source Initiative.
|
|
|
|
# Please submit bugfixes or comments via https://bugs.opensuse.org/
|
|
#
|
|
|
|
|
|
%include %{_sourcedir}/common.inc
|
|
|
|
# So, we have openSUSE:Factory, and we have "ports". In openSUSE:Factory, we
|
|
# have i586 and x86_64. In the :ARM port, we have aarch64, armv6l and armv7l.
|
|
# In the :PowerPC port, we have ppc64, ppc and ppc64le. In the :zSystems port
|
|
# we have s390x. And in the :RISCV we have riscv.
|
|
#
|
|
# Ideally, we'd want to build the firmwares at least once per port, and then
|
|
# share the resulting packages among the arch-es within each port (check the
|
|
# `ExportFilter` directives in the project config).
|
|
#
|
|
# Of course, we always build the "native fimrwares" (e.g., x86 firmwares on
|
|
# x86_64, PPC firmwares on ppc64le, etc). But we also cross compile as much
|
|
# firmwares as we can (e.g., both x86 and PPC firmwares on aarch64) so they'll
|
|
# be available in as many ports as possible (as noarch packages).
|
|
|
|
%ifarch x86_64 aarch64
|
|
%define build_ppc_firmware 1
|
|
# Currently, opensbi does not cross build cleanly on 15.3 and 15.4
|
|
%if ! 0%{?sle_version}
|
|
%define build_opensbi_firmware 1
|
|
%endif
|
|
%define build_x86_firmware 1
|
|
%endif
|
|
%ifarch ppc64 ppc64le
|
|
%define build_ppc_firmware 1
|
|
%if ! 0%{?sle_version}
|
|
%define build_opensbi_firmware 1
|
|
%endif
|
|
# FIXME: Try to enable cross building of x86 firmwares here on PPC
|
|
%endif
|
|
%ifarch riscv64
|
|
%define build_opensbi_firmware 1
|
|
%endif
|
|
|
|
%ifarch %ix86 x86_64 ppc ppc64 ppc64le s390x armv7hl aarch64 riscv64
|
|
%define kvm_available 1
|
|
%define with_uring 1
|
|
%define liburing_min_version 1.0
|
|
%endif
|
|
|
|
%ifarch %ix86 x86_64 s390x
|
|
%define legacy_qemu_kvm 1
|
|
%endif
|
|
|
|
%ifarch x86_64 aarch64 ppc64le s390x
|
|
%define with_rbd 1
|
|
%endif
|
|
|
|
%ifarch x86_64 ppc64le
|
|
%define with_daxctl 1
|
|
%endif
|
|
|
|
# enforce pxe rom sizes for migration compatability from SLE 11 SP3 forward
|
|
# the following need to be > 64K
|
|
%define supported_nics_large {e1000 rtl8139}
|
|
# the following need to be <= 64K
|
|
%define supported_nics_small {virtio}
|
|
# Though not required, make unsupported pxe roms migration compatable as well
|
|
%define unsupported_nics {eepro100 ne2k_pci pcnet}
|
|
|
|
Name: qemu
|
|
URL: https://www.qemu.org/
|
|
Summary: Machine emulator and virtualizer
|
|
License: BSD-2-Clause AND BSD-3-Clause AND GPL-2.0-only AND GPL-2.0-or-later AND LGPL-2.1-or-later AND MIT
|
|
Group: System/Emulators/PC
|
|
Version: 9.0.2
|
|
Release: 0
|
|
Source0: qemu-%{version}.tar.xz
|
|
Source1: common.inc
|
|
Source303: README.PACKAGING
|
|
Source1000: qemu-rpmlintrc
|
|
BuildRoot: %{_tmppath}/%{name}-%{version}-build
|
|
## Packages we REQUIRE during build
|
|
%if %{build_x86_firmware}
|
|
%ifnarch %ix86 x86_64
|
|
# We must cross-compile on non-x86*
|
|
BuildRequires: cross-x86_64-binutils
|
|
BuildRequires: cross-x86_64-gcc%gcc_version
|
|
%endif
|
|
BuildRequires: acpica
|
|
BuildRequires: binutils-devel
|
|
BuildRequires: dos2unix
|
|
BuildRequires: glibc-devel-32bit
|
|
BuildRequires: pkgconfig(liblzma)
|
|
%endif
|
|
%if %{build_opensbi_firmware}
|
|
%ifnarch riscv64
|
|
BuildRequires: cross-riscv64-binutils
|
|
BuildRequires: cross-riscv64-gcc%gcc_version
|
|
%endif
|
|
%endif
|
|
%if %{build_ppc_firmware}
|
|
%ifnarch ppc64 ppc64le
|
|
BuildRequires: cross-ppc64-binutils
|
|
BuildRequires: cross-ppc64-gcc%gcc_version
|
|
%endif
|
|
%endif
|
|
%ifarch x86_64
|
|
BuildRequires: gcc-32bit
|
|
%if %{with_xen}
|
|
BuildRequires: xen-devel >= 4.2
|
|
%endif
|
|
BuildRequires: pkgconfig(libpmem)
|
|
%endif
|
|
%ifnarch %arm s390x
|
|
BuildRequires: libnuma-devel
|
|
%endif
|
|
%if 0%{with canokey}
|
|
BuildRequires: canokey-qemu-devel
|
|
%endif
|
|
%if 0%{?with_daxctl}
|
|
BuildRequires: pkgconfig(libndctl)
|
|
%endif
|
|
%if %{kvm_available}
|
|
BuildRequires: pkgconfig(udev)
|
|
%endif
|
|
%if 0%{?with_rbd}
|
|
BuildRequires: librbd-devel
|
|
%endif
|
|
%if 0%{with spice}
|
|
BuildRequires: pkgconfig(spice-protocol) >= 0.12.3
|
|
BuildRequires: pkgconfig(spice-server) >= 0.12.5
|
|
%endif
|
|
%if 0%{?with_uring}
|
|
BuildRequires: pkgconfig(liburing) >= %liburing_min_version
|
|
%endif
|
|
%if 0%{with xdp}
|
|
BuildRequires: libxdp-devel
|
|
%endif
|
|
%if 0%{?suse_version} >= 1600
|
|
BuildRequires: python3-Sphinx
|
|
BuildRequires: python3-base >= 3.8
|
|
%else
|
|
BuildRequires: python311-Sphinx
|
|
BuildRequires: python311-base
|
|
%endif
|
|
BuildRequires: Mesa-devel
|
|
BuildRequires: bison
|
|
BuildRequires: brlapi-devel
|
|
BuildRequires: discount
|
|
BuildRequires: fdupes
|
|
BuildRequires: flex
|
|
BuildRequires: gcc-c++
|
|
BuildRequires: keyutils-devel
|
|
BuildRequires: libaio-devel
|
|
BuildRequires: libattr-devel
|
|
BuildRequires: libbpf-devel
|
|
BuildRequires: libbz2-devel
|
|
BuildRequires: libcapstone-devel
|
|
BuildRequires: libfdt-devel >= 1.4.2
|
|
BuildRequires: libgcrypt-devel >= 1.8.0
|
|
BuildRequires: lzfse-devel
|
|
BuildRequires: meson
|
|
BuildRequires: multipath-tools-devel
|
|
BuildRequires: ninja >= 1.7
|
|
BuildRequires: pam-devel
|
|
BuildRequires: pkgconfig
|
|
BuildRequires: rdma-core-devel
|
|
BuildRequires: snappy-devel
|
|
BuildRequires: update-desktop-files
|
|
BuildRequires: usbredir-devel >= 0.6
|
|
BuildRequires: xfsprogs-devel
|
|
BuildRequires: pkgconfig(alsa)
|
|
BuildRequires: pkgconfig(epoxy)
|
|
BuildRequires: pkgconfig(gbm)
|
|
BuildRequires: pkgconfig(glib-2.0) >= 2.56
|
|
BuildRequires: pkgconfig(glusterfs-api) >= 3
|
|
BuildRequires: pkgconfig(gnutls) >= 3.5.18
|
|
BuildRequires: pkgconfig(gtk+-3.0) >= 3.22
|
|
BuildRequires: pkgconfig(jack)
|
|
BuildRequires: pkgconfig(libcacard) >= 2.5.1
|
|
BuildRequires: pkgconfig(libcap-ng)
|
|
BuildRequires: pkgconfig(libcurl) >= 7.29
|
|
BuildRequires: pkgconfig(libdrm)
|
|
BuildRequires: pkgconfig(libiscsi) >= 1.9.0
|
|
BuildRequires: pkgconfig(libjpeg)
|
|
BuildRequires: pkgconfig(libnfs) >= 1.9.3
|
|
BuildRequires: pkgconfig(libpipewire-0.3)
|
|
BuildRequires: pkgconfig(libpng)
|
|
BuildRequires: pkgconfig(libpulse)
|
|
BuildRequires: pkgconfig(libsasl2)
|
|
BuildRequires: pkgconfig(libseccomp) >= 2.3.0
|
|
BuildRequires: pkgconfig(libssh) >= 0.8.7
|
|
BuildRequires: pkgconfig(libudev)
|
|
BuildRequires: pkgconfig(libusb-1.0) >= 1.0.13
|
|
BuildRequires: pkgconfig(libzstd)
|
|
BuildRequires: pkgconfig(lzo2)
|
|
BuildRequires: pkgconfig(ncurses)
|
|
BuildRequires: pkgconfig(openssl) >= 1.0.0
|
|
BuildRequires: pkgconfig(pixman-1) >= 0.21.8
|
|
BuildRequires: pkgconfig(slirp) >= 4.2.0
|
|
BuildRequires: pkgconfig(systemd)
|
|
BuildRequires: pkgconfig(vdeplug)
|
|
BuildRequires: pkgconfig(virglrenderer) >= 0.4.1
|
|
BuildRequires: pkgconfig(vte-2.91)
|
|
BuildRequires: pkgconfig(xkbcommon)
|
|
BuildRequires: pkgconfig(zlib)
|
|
%{?systemd_ordering}
|
|
## Packages we will REQUIRE
|
|
%if %{kvm_available}
|
|
Requires(post): acl
|
|
Requires(post): udev
|
|
%endif
|
|
Requires(post): coreutils
|
|
Requires: group(kvm)
|
|
Requires: group(qemu)
|
|
Requires: user(qemu)
|
|
# Due to change in where some documentation files are, if qemu-guest-agent
|
|
# is installed, we need to make sure we update it to our version.
|
|
Requires: (qemu-guest-agent = %{version} if qemu-guest-agent)
|
|
## Packages we will RECOMMEND
|
|
%ifarch s390x
|
|
Recommends: qemu-hw-s390x-virtio-gpu-ccw
|
|
%else
|
|
Recommends: qemu-hw-display-qxl
|
|
Recommends: qemu-hw-display-virtio-gpu
|
|
Recommends: qemu-hw-display-virtio-gpu-pci
|
|
Recommends: qemu-hw-display-virtio-vga
|
|
Recommends: qemu-hw-usb-host
|
|
Recommends: qemu-hw-usb-redirect
|
|
Recommends: qemu-hw-usb-smartcard
|
|
%if 0%{with spice}
|
|
Recommends: qemu-ui-spice-app
|
|
%endif
|
|
# End of "ifarch s390x"
|
|
%endif
|
|
%if %{kvm_available}
|
|
Recommends: kvm_stat
|
|
%endif
|
|
Recommends: qemu-block-curl
|
|
Recommends: qemu-block-nfs
|
|
Recommends: qemu-ksm = %{version}
|
|
Recommends: qemu-tools
|
|
Recommends: qemu-ui-curses
|
|
## Packages we will SUGGEST
|
|
%if 0%{?with_rbd}
|
|
Suggests: qemu-block-rbd
|
|
%endif
|
|
Suggests: qemu-accel-qtest
|
|
Suggests: qemu-block-dmg
|
|
Suggests: qemu-block-gluster
|
|
Suggests: qemu-block-iscsi
|
|
Suggests: qemu-block-ssh
|
|
Suggests: qemu-chardev-baum
|
|
Suggests: qemu-extra
|
|
Suggests: qemu-lang
|
|
Suggests: qemu-microvm
|
|
Suggests: qemu-skiboot
|
|
Suggests: qemu-vhost-user-gpu
|
|
Suggests: qemu-ui-gtk
|
|
Suggests: qemu-doc
|
|
## Packages we PROVIDE
|
|
Provides: kvm = %{version}
|
|
Provides: qemu-kvm = %{version}
|
|
## Pacakges we OBSOLETE (and CONFLICT)
|
|
Obsoletes: kvm <= %{version}
|
|
Obsoletes: qemu-audio-oss < %{version}
|
|
Obsoletes: qemu-audio-sdl < %{version}
|
|
Obsoletes: qemu-kvm <= %{version}
|
|
Obsoletes: qemu-sgabios <= 8
|
|
Obsoletes: qemu-ui-sdl < %{version}
|
|
## What we do with the main emulator depends on the architecture we're on
|
|
%if %{kvm_available}
|
|
%ifarch %ix86 x86_64
|
|
Requires: qemu-x86
|
|
%else
|
|
Suggests: qemu-x86
|
|
%endif
|
|
%ifarch ppc ppc64 ppc64le
|
|
Requires: qemu-ppc
|
|
%else
|
|
Suggests: qemu-ppc
|
|
%endif
|
|
%ifarch s390x
|
|
Requires: qemu-s390x
|
|
Requires(post): procps
|
|
%else
|
|
Suggests: qemu-s390x
|
|
%endif
|
|
%ifarch %arm aarch64
|
|
Requires: qemu-arm
|
|
%else
|
|
Suggests: qemu-arm
|
|
%endif
|
|
%ifarch riscv64
|
|
Requires: qemu-extra
|
|
%else
|
|
Suggests: qemu-extra
|
|
%endif
|
|
# End of "if kvm_available"
|
|
%endif
|
|
|
|
%description
|
|
%{generic_qemu_description}
|
|
|
|
This package acts as an umbrella package to the other QEMU sub-packages.
|
|
|
|
%files
|
|
%if %{kvm_available}
|
|
%ifarch s390x
|
|
%{_prefix}/lib/modules-load.d/kvm.conf
|
|
%endif
|
|
/usr/lib/udev/rules.d/80-kvm.rules
|
|
# End of "if kvm_available"
|
|
%endif
|
|
%if %{legacy_qemu_kvm}
|
|
%doc %_docdir/qemu-kvm
|
|
%_mandir/man1/qemu-kvm.1.gz
|
|
%endif
|
|
%_bindir/qemu-kvm
|
|
%dir %_datadir/icons/hicolor
|
|
%dir %_datadir/icons/hicolor/*/
|
|
%dir %_datadir/icons/hicolor/*/apps
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/firmware
|
|
%dir %_datadir/%name/vhost-user
|
|
%dir %_sysconfdir/%name
|
|
%dir %_sysconfdir/%name/firmware
|
|
%dir /usr/lib/supportconfig
|
|
%dir /usr/lib/supportconfig/plugins
|
|
%_datadir/applications/qemu.desktop
|
|
%_datadir/icons/hicolor/16x16/apps/qemu.png
|
|
%_datadir/icons/hicolor/24x24/apps/qemu.png
|
|
%_datadir/icons/hicolor/32x32/apps/qemu.bmp
|
|
%_datadir/icons/hicolor/32x32/apps/qemu.png
|
|
%_datadir/icons/hicolor/48x48/apps/qemu.png
|
|
%_datadir/icons/hicolor/64x64/apps/qemu.png
|
|
%_datadir/icons/hicolor/128x128/apps/qemu.png
|
|
%_datadir/icons/hicolor/256x256/apps/qemu.png
|
|
%_datadir/icons/hicolor/512x512/apps/qemu.png
|
|
%_datadir/icons/hicolor/scalable/apps/qemu.svg
|
|
%_datadir/%name/keymaps
|
|
%_datadir/%name/qemu-ifup
|
|
%_datadir/%name/qemu-nsis.bmp
|
|
%_datadir/%name/trace-events-all
|
|
%_mandir/man1/%name.1.gz
|
|
%_mandir/man7/qemu-block-drivers.7.gz
|
|
%_mandir/man7/qemu-cpu-models.7.gz
|
|
%_mandir/man7/qemu-qmp-ref.7.gz
|
|
%_mandir/man7/qemu-ga-ref.7.gz
|
|
/usr/lib/supportconfig/plugins/%name
|
|
%license COPYING COPYING.LIB LICENSE
|
|
|
|
%if %{kvm_available}
|
|
%post
|
|
# Do not execute operations affecting host devices while running in a chroot
|
|
if [ $(stat -L -c "%i" /proc/1/root/) = $(stat -L -c "%i" /) ]; then
|
|
setfacl --remove-all /dev/kvm &> /dev/null || :
|
|
%ifarch s390x
|
|
if [ -c /dev/kvm ]; then
|
|
%_bindir/chmod 0666 /dev/kvm
|
|
%_bindir/chgrp kvm /dev/kvm
|
|
fi
|
|
%endif
|
|
%udev_rules_update
|
|
%_bindir/udevadm trigger -y kvm || :
|
|
%ifarch s390x
|
|
sysctl vm.allocate_pgste=1 || :
|
|
%endif
|
|
fi
|
|
# End of "if {kvm_available}"
|
|
%endif
|
|
|
|
# Modules need to match {qemu-system-*,qemu-img} version.
|
|
# We cannot have qemu and qemu-tools require them in the right version,
|
|
# as that would drag in the dependencies the modules are supposed to avoid.
|
|
# Nor can we have modules require the right version of qemu and qemu-tools
|
|
# as Xen reuses our qemu-tools but does not want our qemu and qemu-x86.
|
|
%define qemu_module_conflicts \
|
|
Conflicts: %name < %{version}-%{release} \
|
|
Conflicts: %name > %{version}-%{release} \
|
|
Conflicts: qemu-tools < %{version}-%{release} \
|
|
Conflicts: qemu-tools > %{version}-%{release}
|
|
|
|
%prep
|
|
%autosetup -n qemu-%{version} -p1
|
|
|
|
# We have the meson subprojects there, but as submodules (because OBS
|
|
# SCM bridge can handle the latter, but not the former) so we need to
|
|
# apply the layering of the packagefiles manually
|
|
meson subprojects packagefiles --apply berkeley-testfloat-3
|
|
meson subprojects packagefiles --apply berkeley-softfloat-3
|
|
|
|
# for the record, this set of firmware files is installed, but we don't
|
|
# build (yet): bamboo.dtb canyonlands.dtb hppa-firmware.img hppa-firmware.img 64
|
|
# openbios-ppc openbios-sparc32 openbios-sparc64 palcode-clipper petalogix-ml605.dtb
|
|
# petalogix-s3adsp1800.dtb QEMU,cgthree.bin QEMU,tcx.bin qemu_vga.ndrv
|
|
# u-boot.e500 u-boot-sam460-20100605.bin opensbi-riscv32-generic-fw_dynamic.bin
|
|
# opensbi-riscv32-generic-fw_dynamic.elfnpcm7xx_bootrom.bin vof.bin
|
|
# vof-nvram.bin
|
|
|
|
# Note that:
|
|
# - default firmwares are built "by default", i.e., they're built automatically
|
|
# during the process of building QEMU (on each specific arch)
|
|
# - extra firmwares are built "manually" (see below) from their own sources
|
|
# (which, typically, are submodules checked out in the {srcdi}r/roms directory)
|
|
%define ppc_default_firmware %{nil}
|
|
#{vof.bin vof-nvram.bin}
|
|
%define ppc_extra_firmware {skiboot.lid slof.bin}
|
|
%define riscv64_default_firmware %{nil}
|
|
%define riscv64_extra_firmware {opensbi-riscv64-generic-fw_dynamic.bin}
|
|
%define s390x_default_firmware {s390-ccw.img s390-netboot.img}
|
|
%define s390x_extra_firmware %{nil}
|
|
%define x86_default_firmware {linuxboot.bin linuxboot_dma.bin multiboot.bin \
|
|
multiboot_dma.bin kvmvapic.bin pvh.bin}
|
|
%define x86_extra_firmware {bios.bin bios-256k.bin bios-microvm.bin qboot.rom \
|
|
pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom pxe-pcnet.rom pxe-rtl8139.rom \
|
|
pxe-virtio.rom vgabios-ati.bin vgabios-bochs-display.bin \
|
|
vgabios.bin vgabios-cirrus.bin vgabios-qxl.bin vgabios-ramfb.bin \
|
|
vgabios-stdvga.bin vgabios-virtio.bin vgabios-vmware.bin \
|
|
efi-e1000.rom efi-e1000e.rom efi-eepro100.rom efi-ne2k_pci.rom efi-pcnet.rom \
|
|
efi-rtl8139.rom efi-virtio.rom efi-vmxnet3.rom}
|
|
|
|
# Complete list of all the firmwares that we build, if we consider
|
|
# all the builds, on all the arches.
|
|
%define firmware { \
|
|
%{ppc_default_firmware} %{ppc_extra_firmware} \
|
|
%{riscv64_default_firmware} %{riscv64_extra_firmware} \
|
|
%{s390x_default_firmware} %{s390x_extra_firmware} \
|
|
%{x86_default_firmware} %{x86_extra_firmware} }
|
|
|
|
# Note that:
|
|
# - {arch}_default_built_firmware are the firmwares that we will be built by
|
|
# default in this particular build, on the arch where we currently are on
|
|
# - {arch}_extra_built_fimrware, likewise, but for extra firmwares, built manually
|
|
%ifarch ppc64 ppc64le
|
|
%define ppc_default_built_firmware %{ppc_default_firmware}
|
|
%endif
|
|
%ifarch riscv64
|
|
%define riscv64_default_built_firmware %{riscv64_default_firmware}
|
|
%endif
|
|
%ifarch s390x
|
|
%define s390x_default_built_firmware %{s390x_default_firmware}
|
|
%endif
|
|
%ifarch %ix86 x86_64
|
|
%define x86_default_built_firmware %{x86_default_firmware}
|
|
%endif
|
|
|
|
%if %{build_opensbi_firmware}
|
|
%define riscv64_extra_built_firmware %{riscv64_extra_firmware}
|
|
%endif
|
|
%if %{build_ppc_firmware}
|
|
%define ppc_extra_built_firmware %{ppc_extra_firmware}
|
|
%endif
|
|
%if %{build_x86_firmware}
|
|
%define x86_extra_built_firmware %{x86_extra_firmware}
|
|
%endif
|
|
|
|
# List of only firmwares that will actually be built, in this instance
|
|
%define built_firmware { \
|
|
%{?ppc_default_built_firmware} %{?ppc_extra_built_firmware} \
|
|
%{?riscv64_default_built_firmware} %{?riscv64_extra_built_firmware} \
|
|
%{?s390x_default_built_firmware} %{?s390x_extra_built_firmware} \
|
|
%{?x86_default_built_firmware} %{?x86_extra_built_firmware} }
|
|
|
|
%build
|
|
|
|
%define rpmfilesdir %{_builddir}/qemu-%{version}/rpm
|
|
|
|
%if %{legacy_qemu_kvm}
|
|
# FIXME: Why are we copying the s390 specific one?
|
|
cp %{rpmfilesdir}/supported.s390.txt docs/supported.rst
|
|
sed -i '/^\ \ \ about\/index.*/i \ \ \ supported.rst' docs/index.rst
|
|
%endif
|
|
|
|
# When generating an upstream release tarball, the following commands
|
|
# are run (see scripts/make-release):
|
|
# (cd roms/seabios && git describe --tags --long --dirty > .version)
|
|
# (cd roms/skiboot && ./make_version.sh > .version)
|
|
# This has not happened for the archive we're using, since it's cloned
|
|
# from a git branch. We, therefore, assumed that the following commands
|
|
# have been run, and the result committed to the repository (with seabios
|
|
# and skiboot at the proper commit/tag/...):
|
|
# git -C roms/seabios describe --tags --long --dirty > rpm/seabios_version
|
|
# (cd roms/skiboot && ./make_version.sh > ../../rpm/skiboot_version)
|
|
cp %{rpmfilesdir}/seabios_version roms/seabios/.version
|
|
cp %{rpmfilesdir}/skiboot_version roms/skiboot/.version
|
|
find . -iname ".git" -exec rm -rf {} +
|
|
|
|
mkdir -p %blddir
|
|
cd %blddir
|
|
export USER=abuild
|
|
export HOSTNAME=OBS # is used in roms/SLOF/Makefile.gen (boo#1084909)
|
|
|
|
# We define a few general and common options and then we disable
|
|
# pretty much everything. Afterwards, there is a section for each
|
|
# of the flavors where we explicitly enable all the feature we want
|
|
# for them.
|
|
|
|
# TODO: Check whether we want to enable the followings:
|
|
# * avx512f
|
|
# * debug-info
|
|
# * fuse
|
|
# * malloc-trim
|
|
# * multiprocess
|
|
# * qom-cast-debug
|
|
# * trace-backends=dtrace
|
|
#
|
|
# Fedora has avx2 enabled for ix86, while we can't (I tried). Guess it's
|
|
# because, for them, ix86 == i686 (while for us it's i586).
|
|
|
|
# Let's try to stick to _FORTIFY_SOURCE=2 for now
|
|
EXTRA_CFLAGS="$(echo %{optflags} | sed -E 's/-[A-Z]?_FORTIFY_SOURCE[=]?[0-9]*//g') -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -Wno-error"
|
|
|
|
%srcdir/configure \
|
|
%if 0%{?suse_version} >= 1600
|
|
--python=%_bindir/python3 \
|
|
%else
|
|
--python=%_bindir/python3.11 \
|
|
%endif
|
|
--docdir=%_docdir \
|
|
--datadir=%_datadir \
|
|
--extra-cflags="${EXTRA_CFLAGS}" \
|
|
--firmwarepath=%_datadir/%name \
|
|
--libdir=%_libdir \
|
|
--libexecdir=%_libexecdir \
|
|
--localstatedir=%_localstatedir \
|
|
--prefix=%_prefix \
|
|
--sysconfdir=%_sysconfdir \
|
|
--with-pkgversion="%(echo '%{distro}' | sed 's/ (.*)//')" \
|
|
--disable-af-xdp \
|
|
--disable-alsa \
|
|
--disable-attr \
|
|
--disable-auth-pam \
|
|
--disable-avx2 \
|
|
--disable-avx512f \
|
|
--disable-block-drv-whitelist-in-tools \
|
|
--disable-bochs \
|
|
--disable-bpf \
|
|
--disable-brlapi \
|
|
--disable-bsd-user \
|
|
--disable-bzip2 \
|
|
--disable-cap-ng \
|
|
--disable-capstone \
|
|
--disable-cfi \
|
|
--disable-cfi-debug \
|
|
--disable-cloop \
|
|
--disable-cocoa \
|
|
--disable-coreaudio \
|
|
--disable-coroutine-pool \
|
|
--disable-crypto-afalg \
|
|
--disable-curl \
|
|
--disable-curses \
|
|
--disable-dbus-display \
|
|
--disable-debug-info \
|
|
--disable-debug-mutex \
|
|
--disable-debug-tcg \
|
|
--disable-dmg \
|
|
--disable-docs \
|
|
--disable-download \
|
|
--disable-dsound \
|
|
--disable-fdt \
|
|
--disable-fuse \
|
|
--disable-fuse-lseek \
|
|
--disable-gcrypt \
|
|
--disable-gettext \
|
|
--disable-gio \
|
|
--disable-glusterfs \
|
|
--disable-gnutls \
|
|
--disable-gtk \
|
|
--disable-guest-agent \
|
|
--disable-guest-agent-msi \
|
|
--disable-hv-balloon \
|
|
--disable-hvf \
|
|
--disable-iconv \
|
|
--disable-jack \
|
|
--disable-kvm \
|
|
--disable-l2tpv3 \
|
|
--disable-libdaxctl \
|
|
--disable-libiscsi \
|
|
--disable-libkeyutils \
|
|
--disable-libnfs \
|
|
--disable-libpmem \
|
|
--disable-libssh \
|
|
--disable-libudev \
|
|
--disable-libusb \
|
|
--disable-linux-aio \
|
|
--disable-linux-io-uring \
|
|
--disable-linux-user \
|
|
--disable-live-block-migration \
|
|
--disable-lto \
|
|
--disable-lzfse \
|
|
--disable-lzo \
|
|
--disable-malloc-trim \
|
|
--disable-membarrier \
|
|
--disable-module-upgrades \
|
|
--disable-modules \
|
|
--disable-mpath \
|
|
--disable-multiprocess \
|
|
--disable-netmap \
|
|
--disable-nettle \
|
|
--disable-numa \
|
|
--disable-nvmm \
|
|
--disable-opengl \
|
|
--disable-oss \
|
|
--disable-pa \
|
|
--disable-parallels \
|
|
--disable-pie \
|
|
--disable-pipewire \
|
|
--disable-pixman \
|
|
--disable-plugins \
|
|
--disable-png \
|
|
--disable-pvrdma \
|
|
--disable-qcow1 \
|
|
--disable-qed \
|
|
--disable-qom-cast-debug \
|
|
--disable-rbd \
|
|
--disable-rdma \
|
|
--disable-relocatable \
|
|
--disable-replication \
|
|
--disable-rng-none \
|
|
--disable-rutabaga-gfx \
|
|
--disable-safe-stack \
|
|
--disable-sanitizers \
|
|
--disable-sdl \
|
|
--disable-sdl-image \
|
|
--disable-seccomp \
|
|
--disable-selinux \
|
|
--disable-slirp \
|
|
--disable-slirp-smbd \
|
|
--disable-smartcard \
|
|
--disable-snappy \
|
|
--disable-sparse \
|
|
--disable-spice \
|
|
--disable-spice-protocol \
|
|
--disable-strip \
|
|
--disable-system \
|
|
--disable-tcg \
|
|
--disable-tcg-interpreter \
|
|
--disable-tools \
|
|
--disable-tpm \
|
|
--disable-u2f \
|
|
--disable-usb-redir \
|
|
--disable-user \
|
|
--disable-vde \
|
|
--disable-vdi \
|
|
--disable-vhost-crypto \
|
|
--disable-vhost-kernel \
|
|
--disable-vhost-net \
|
|
--disable-vhost-user \
|
|
--disable-vhost-user-blk-server \
|
|
--disable-vhost-vdpa \
|
|
--disable-virglrenderer \
|
|
--disable-virtfs \
|
|
--disable-vnc \
|
|
--disable-vnc-jpeg \
|
|
--disable-vnc-sasl \
|
|
--disable-vte \
|
|
--disable-vvfat \
|
|
--disable-werror \
|
|
--disable-whpx \
|
|
--disable-xen \
|
|
--disable-xen-pci-passthrough \
|
|
--disable-xkbcommon \
|
|
--disable-zstd \
|
|
--without-default-devices \
|
|
%if 0%{?suse_version} >= 1600
|
|
--audio-drv-list=pipewire,pa,alsa,jack,oss \
|
|
%else
|
|
--audio-drv-list=pa,pipewire,alsa,jack,oss \
|
|
%endif
|
|
%ifarch x86_64
|
|
--enable-avx2 \
|
|
--enable-libpmem \
|
|
%if %{with_xen}
|
|
--enable-xen \
|
|
--enable-xen-pci-passthrough \
|
|
%endif
|
|
%endif
|
|
%if 0%{with xdp}
|
|
--enable-af-xdp \
|
|
%endif
|
|
%if 0%{with canokey}
|
|
--enable-canokey \
|
|
%endif
|
|
%if %{kvm_available}
|
|
--enable-kvm \
|
|
%endif
|
|
%if 0%{?with_daxctl}
|
|
--enable-libdaxctl \
|
|
%endif
|
|
%if 0%{?with_uring}
|
|
--enable-linux-io-uring \
|
|
%endif
|
|
%if "%{_lto_cflags}" != "%{nil}"
|
|
--enable-lto \
|
|
%endif
|
|
%if %{with malloc_trim}
|
|
--enable-malloc-trim \
|
|
%endif
|
|
%if %{with system_membarrier}
|
|
--enable-membarrier \
|
|
%endif
|
|
%ifnarch %arm s390x
|
|
--enable-numa \
|
|
%endif
|
|
%if 0%{?with_rbd}
|
|
--enable-rbd \
|
|
%endif
|
|
%if %{has_rutabaga_gfx}
|
|
--enable-rutabaga-gfx \
|
|
%endif
|
|
--enable-alsa \
|
|
--enable-attr \
|
|
--enable-auth-pam \
|
|
--enable-bochs \
|
|
--enable-bpf \
|
|
--enable-brlapi \
|
|
--enable-bzip2 \
|
|
--enable-cap-ng \
|
|
--enable-capstone \
|
|
--enable-cloop \
|
|
--enable-coroutine-pool \
|
|
--enable-curl \
|
|
--enable-curses \
|
|
--enable-dbus-display \
|
|
--enable-dmg \
|
|
--enable-docs \
|
|
--enable-fdt=system \
|
|
--enable-gcrypt \
|
|
--enable-gettext \
|
|
--enable-gio \
|
|
--enable-glusterfs \
|
|
--enable-gnutls \
|
|
--enable-gtk \
|
|
--enable-guest-agent \
|
|
--enable-hv-balloon \
|
|
--enable-iconv \
|
|
--enable-jack \
|
|
--enable-l2tpv3 \
|
|
--enable-libiscsi \
|
|
--enable-libkeyutils \
|
|
--enable-libnfs \
|
|
--enable-libssh \
|
|
--enable-libudev \
|
|
--enable-libusb \
|
|
--enable-linux-aio \
|
|
--enable-live-block-migration \
|
|
--enable-lzfse \
|
|
--enable-lzo \
|
|
--enable-modules \
|
|
--enable-mpath \
|
|
--enable-opengl \
|
|
--enable-oss \
|
|
--enable-pa \
|
|
--enable-parallels \
|
|
--enable-pie \
|
|
--enable-pipewire \
|
|
--enable-pixman \
|
|
--enable-png \
|
|
--enable-pvrdma \
|
|
--enable-qcow1 \
|
|
--enable-qed \
|
|
--enable-rdma \
|
|
--enable-relocatable \
|
|
--enable-replication \
|
|
--enable-seccomp \
|
|
--enable-selinux \
|
|
--enable-slirp \
|
|
--enable-slirp-smbd \
|
|
--enable-smartcard \
|
|
--enable-snappy \
|
|
%if 0%{with spice}
|
|
--enable-spice \
|
|
--enable-spice-protocol \
|
|
%endif
|
|
--enable-system \
|
|
--enable-tcg \
|
|
--enable-tools \
|
|
--enable-tpm \
|
|
--enable-usb-redir \
|
|
--enable-vde \
|
|
--enable-vdi \
|
|
--enable-vhost-crypto \
|
|
--enable-vhost-kernel \
|
|
--enable-vhost-net \
|
|
--enable-vhost-user \
|
|
--enable-vhost-user-blk-server \
|
|
--enable-vhost-vdpa \
|
|
--enable-virglrenderer \
|
|
--enable-virtfs \
|
|
--enable-vnc \
|
|
--enable-vnc-jpeg \
|
|
--enable-vnc-sasl \
|
|
--enable-vte \
|
|
--enable-vvfat \
|
|
--enable-werror \
|
|
--enable-xkbcommon \
|
|
--enable-zstd \
|
|
--with-coroutine=ucontext \
|
|
--with-default-devices
|
|
|
|
echo "=== Content of config-host.mak: ==="
|
|
cat config-host.mak
|
|
echo "=== ==="
|
|
|
|
# For building QEMU and all the "default" firmwares, for each arch,
|
|
# for the package qemu, we first need to delete the firmware files that
|
|
# we intend to build...
|
|
#
|
|
# TODO: check if this can be common to qemu and qemu-linux-user
|
|
for i in %built_firmware
|
|
do
|
|
unlink %srcdir/pc-bios/$i
|
|
done
|
|
|
|
%make_build
|
|
|
|
# ... Then, we need to reinstate the firmwares that have been built already
|
|
for i in %{?s390x_default_built_firmware}
|
|
do
|
|
cp pc-bios/s390-ccw/$i %srcdir/pc-bios/
|
|
done
|
|
|
|
for i in %{?x86_default_built_firmware}
|
|
do
|
|
cp pc-bios/optionrom/$i %srcdir/pc-bios/
|
|
done
|
|
|
|
# Build the "extra" firmwares. Note that the QEMU Makefile in {srcdir}/roms
|
|
# does some cross-compiler auto detection. So we often don't need to define
|
|
# or pass CROSS= and CROSS_COMPILE ourselves.
|
|
|
|
%if %{build_ppc_firmware}
|
|
# FIXME: check if we can upstream: Makefile-define-endianess-for-cross-buil.patch
|
|
%make_build -C %srcdir/roms skiboot
|
|
|
|
%make_build -C %srcdir/roms slof
|
|
%endif
|
|
|
|
%if %{build_opensbi_firmware}
|
|
%make_build -C %srcdir/roms opensbi64-generic
|
|
# End of "if build_ppc_firmware"
|
|
%endif
|
|
|
|
%if %{build_x86_firmware}
|
|
%make_build %{?_smp_mflags} -C %srcdir/roms bios \
|
|
SEABIOS_EXTRAVERSION="-rebuilt.opensuse.org" \
|
|
|
|
pushd %srcdir/roms/seabios/docs
|
|
for f in *.md
|
|
do
|
|
b="${f%.md}"
|
|
# Ensure the correct media type
|
|
markdown "${f}" >"${b}.html"
|
|
# Links to b.md will be rendered as to b
|
|
ln -Ts "${b}.html" "${b}"
|
|
done
|
|
popd
|
|
|
|
# FIXME: check if we can upstream: roms-Makefile-add-cross-file-to-qboot-me.patch
|
|
# and qboot-add-cross.ini-file-to-handle-aarch.patch
|
|
%make_build -C %srcdir/roms qboot
|
|
|
|
%make_build -C %srcdir/roms seavgabios \
|
|
|
|
%make_build -C %srcdir/roms seavgabios-ati \
|
|
|
|
%make_build -C %srcdir/roms pxerom NO_WERROR=1
|
|
|
|
%make_build -C %srcdir/roms edk2-basetools EXTRA_OPTFLAGS='-fPIE'
|
|
|
|
%make_build -C %srcdir/roms efirom NO_WERROR=1
|
|
|
|
%if %{force_fit_virtio_pxe_rom}
|
|
pushd %srcdir
|
|
patch -p1 < %{rpmfilesdir}/openSUSE-pcbios-stub-out-the-SAN-req-s-i.patch
|
|
popd
|
|
%make_build -C %srcdir/roms NO_WERROR=1 pxerom_variants=virtio pxerom_targets=1af41000 pxerom
|
|
%endif
|
|
|
|
for i in %supported_nics_large %unsupported_nics
|
|
do
|
|
if test "`stat -c '%s' %srcdir/pc-bios/pxe-$i.rom`" -gt "131072" ; then
|
|
echo "pxe rom is too large"
|
|
exit 1
|
|
fi
|
|
if test "`stat -c '%s' %srcdir/pc-bios/pxe-$i.rom`" -le "65536" ; then
|
|
%srcdir/roms/ipxe/src/util/padimg.pl %srcdir/pc-bios/pxe-$i.rom -s 65536 -b 255
|
|
echo -ne "SEGMENT OVERAGE\0" >> %srcdir/pc-bios/pxe-$i.rom
|
|
fi
|
|
done
|
|
for i in %supported_nics_small
|
|
do
|
|
if test "`stat -c '%s' %srcdir/pc-bios/pxe-$i.rom`" -gt "65536" ; then
|
|
echo "pxe rom is too large"
|
|
exit 1
|
|
fi
|
|
done
|
|
# End of "if build_x86_firmware"
|
|
%endif
|
|
|
|
%install
|
|
cd %blddir
|
|
|
|
%make_build install DESTDIR=%{buildroot}
|
|
|
|
%find_lang %name
|
|
install -d -m 0755 %{buildroot}%_datadir/%name/firmware
|
|
install -d -m 0755 %{buildroot}/usr/lib/supportconfig/plugins
|
|
install -d -m 0755 %{buildroot}%_sysconfdir/%name/firmware
|
|
install -D -m 0644 %{rpmfilesdir}/bridge.conf %{buildroot}%_sysconfdir/%name/bridge.conf
|
|
install -D -m 0755 %{rpmfilesdir}/qemu-ifup %{buildroot}%_datadir/%name/qemu-ifup
|
|
install -D -p -m 0644 %{rpmfilesdir}/80-qemu-ga.rules %{buildroot}/usr/lib/udev/rules.d/80-qemu-ga.rules
|
|
install -D -m 0755 scripts/analyze-migration.py %{buildroot}%_bindir/analyze-migration.py
|
|
install -D -m 0755 scripts/vmstate-static-checker.py %{buildroot}%_bindir/vmstate-static-checker.py
|
|
install -D -m 0755 scripts/kvm/vmxcap %{buildroot}%_bindir/vmxcap
|
|
install -D -m 0755 %{rpmfilesdir}/qemu-supportconfig %{buildroot}/usr/lib/supportconfig/plugins/%name
|
|
install -D -m 0644 %{rpmfilesdir}/supported.arm.txt %{buildroot}%_docdir/qemu-arm/supported.txt
|
|
install -D -m 0644 %{rpmfilesdir}/supported.ppc.txt %{buildroot}%_docdir/qemu-ppc/supported.txt
|
|
install -D -m 0644 %{rpmfilesdir}/supported.x86.txt %{buildroot}%_docdir/qemu-x86/supported.txt
|
|
install -D -m 0644 %{rpmfilesdir}/supported.s390.txt %{buildroot}%_docdir/qemu-s390x/supported.txt
|
|
|
|
%if %{legacy_qemu_kvm}
|
|
install -D -m 0644 %{rpmfilesdir}/qemu-kvm.1.gz %{buildroot}%_mandir/man1/qemu-kvm.1.gz
|
|
install -d %{buildroot}%_docdir/qemu-kvm
|
|
# FIXME: Why do we onlly generate the HTML for the legacy package documentation?
|
|
%ifarch s390x
|
|
ln -s ../qemu-s390x/supported.txt %{buildroot}%_docdir/qemu-kvm/kvm-supported.txt
|
|
rst2html --exit-status=2 %{buildroot}%_docdir/qemu-s390x/supported.txt %{buildroot}%_docdir/qemu-kvm/kvm-supported.html
|
|
%else
|
|
ln -s ../qemu-x86/supported.txt %{buildroot}%_docdir/qemu-kvm/kvm-supported.txt
|
|
rst2html --exit-status=2 %{buildroot}%_docdir/qemu-x86/supported.txt %{buildroot}%_docdir/qemu-kvm/kvm-supported.html
|
|
# End of "ifarch s390x"
|
|
%endif
|
|
# End of "if legacy_qemu_kvm"
|
|
%endif
|
|
|
|
%ifarch aarch64 %arm %ix86 ppc ppc64 ppc64le riscv64 s390x x86_64
|
|
%ifarch ppc64le
|
|
%define qemu_arch ppc64
|
|
%endif
|
|
ln -s qemu-system-%{qemu_arch} %{buildroot}%_bindir/qemu-kvm
|
|
%endif
|
|
|
|
%if %{kvm_available}
|
|
install -D -m 0644 %{rpmfilesdir}/80-kvm.rules %{buildroot}/usr/lib/udev/rules.d/80-kvm.rules
|
|
%endif
|
|
install -D -p -m 0644 %{rpmfilesdir}/qemu-guest-agent.service %{buildroot}%{_unitdir}/qemu-guest-agent.service
|
|
install -D -p -m 0644 %{rpmfilesdir}/ksm.service %{buildroot}%{_unitdir}/ksm.service
|
|
%ifarch s390x
|
|
install -D -m 0644 %{rpmfilesdir}/kvm.conf %{buildroot}%{_prefix}/lib/modules-load.d/kvm.conf
|
|
# End of "if kvm_available"
|
|
%endif
|
|
|
|
# We rely on a separate project / package to provide edk2 firmware
|
|
unlink %{buildroot}%_datadir/%name/edk2-licenses.txt
|
|
unlink %{buildroot}%_datadir/%name/firmware/50-edk2-i386-secure.json
|
|
unlink %{buildroot}%_datadir/%name/firmware/50-edk2-x86_64-secure.json
|
|
unlink %{buildroot}%_datadir/%name/firmware/60-edk2-aarch64.json
|
|
unlink %{buildroot}%_datadir/%name/firmware/60-edk2-arm.json
|
|
unlink %{buildroot}%_datadir/%name/firmware/60-edk2-i386.json
|
|
unlink %{buildroot}%_datadir/%name/firmware/60-edk2-x86_64.json
|
|
unlink %{buildroot}%_datadir/%name/edk2-aarch64-code.fd
|
|
unlink %{buildroot}%_datadir/%name/edk2-arm-code.fd
|
|
unlink %{buildroot}%_datadir/%name/edk2-arm-vars.fd
|
|
unlink %{buildroot}%_datadir/%name/edk2-i386-code.fd
|
|
unlink %{buildroot}%_datadir/%name/edk2-i386-secure-code.fd
|
|
unlink %{buildroot}%_datadir/%name/edk2-i386-vars.fd
|
|
unlink %{buildroot}%_datadir/%name/edk2-x86_64-code.fd
|
|
unlink %{buildroot}%_datadir/%name/edk2-x86_64-secure-code.fd
|
|
|
|
# this was never meant for customer consumption - delete even though installed
|
|
unlink %{buildroot}%_bindir/elf2dmp
|
|
|
|
# For PPC and x86 firmwares, there are a few extra install steps necessary.
|
|
# In general, if we know that we have not built a firmware, remove it from the
|
|
# install base, as the one that we have there is the upstream binary, that got
|
|
# copied there during `make install`.
|
|
|
|
%if %{build_ppc_firmware}
|
|
# In support of update-alternatives
|
|
#
|
|
# The reason why we do this, is because we have (only for PPC) an skiboot
|
|
# package, shipping an alternative version of skiboot.lid. That is, in fact,
|
|
# what's "on the other end" of us supporting update-alternatives for this
|
|
# particular firmware.
|
|
mv %{buildroot}%_datadir/%name/skiboot.lid %{buildroot}%_datadir/%name/skiboot.lid.qemu
|
|
# create a dummy target for /etc/alternatives/skiboot.lid
|
|
mkdir -p %{buildroot}%{_sysconfdir}/alternatives
|
|
ln -s -f %{_sysconfdir}/alternatives/skiboot.lid %{buildroot}%{_datadir}/%name/skiboot.lid
|
|
%else
|
|
for f in %{ppc_extra_firmware} ; do
|
|
unlink %{buildroot}%_datadir/%name/$f
|
|
done
|
|
# End of "if build_ppc_fimrware"
|
|
%endif
|
|
|
|
# For riscv64 firmwares (currently, only opensbi), we leave them there in
|
|
# any case, because they're part of the qemu-extra package, and riscv is
|
|
# a bit special in many ways already.
|
|
|
|
%if %{build_x86_firmware}
|
|
install -D -m 0644 %{rpmfilesdir}/50-seabios-256k.json %{buildroot}%_datadir/%name/firmware/50-seabios-256k.json
|
|
install -D -m 0644 %{rpmfilesdir}/60-seabios-128k.json %{buildroot}%_datadir/%name/firmware/60-seabios-128k.json
|
|
install -d -m 0755 %{buildroot}%_docdir/qemu-seabios
|
|
%else
|
|
for f in %{x86_extra_firmware} ; do
|
|
unlink %{buildroot}%_datadir/%name/$f
|
|
done
|
|
# End of "if build_x86_firmware"
|
|
%endif
|
|
|
|
%suse_update_desktop_file qemu
|
|
|
|
# Common install steps for qemu and qemu-linux-user
|
|
%fdupes -s %{buildroot}
|
|
|
|
%check
|
|
cd %blddir
|
|
|
|
# Patch 'increase x86_64 physical bits to 42' requires that the DSDT used for
|
|
# acpi [q]tests is modified too. But it's binary, and that means we cannot
|
|
# do that in the patch itself. Instead, we keep a copy of the binary in the
|
|
# package sources, and put it in place now, before the tests themselves.
|
|
# If that patch is removed, the following line needs to go as well.
|
|
cp %{rpmfilesdir}/DSDT.pcie %{srcdir}/tests/data/acpi/microvm/
|
|
|
|
# Patch 'tests/acpi: update tables for new core count test' requires some new
|
|
# binaries to be introcuded too. Let's copy them in place as well
|
|
cp %{rpmfilesdir}/APIC.core-count2 %{rpmfilesdir}/DSDT.core-count2 %{rpmfilesdir}/FACP.core-count2 %{srcdir}/tests/data/acpi/q35/
|
|
|
|
%if 0%{?qemu_user_space_build}
|
|
# Seccomp is not supported by linux-user emulation
|
|
echo 'int main (void) { return 0; }' > %{srcdir}/tests/unit/test-seccomp.c
|
|
# keyctl is not yet supported by linux-user emulation
|
|
echo 'int main (void) { return 0; }' > %{srcdir}/tests/unit/test-crypto-secret.c
|
|
%endif
|
|
|
|
# Compile the QOM test binary first, so that ...
|
|
%make_build tests/qtest/qom-test
|
|
# ... make comes in fresh and has lots of address space (needed for 32bit, bsc#957379)
|
|
# FIXME: is this still a problem?
|
|
|
|
# Let's build everything first
|
|
%make_build check-build
|
|
# Let's now run the 'make check' component individually, so we have
|
|
# more control on the options (like -j, etc)
|
|
%make_build check-unit
|
|
%make_build check-qapi-schema
|
|
%make_build check-softfloat
|
|
# This would be `make_build check-block`. But iotests are not reliable
|
|
# if ran in parallel in OBS, so let's be slow for now.
|
|
make -O V=1 VERBOSE=1 -j1 check-block
|
|
%if %{with chkqtests} && !0%{?qemu_user_space_build}
|
|
# Run qtests sequentially, as it's too unreliable, when run in OBS, if parallelized
|
|
make -O V=1 VERBOSE=1 -j1 check-qtest
|
|
%endif
|
|
# Last step will be to run a full check-report, but we will
|
|
# enable this at a later point
|
|
#make -O V=1 VERBOSE=1 -j1 check-report.junit.xml
|
|
|
|
%if 0%{with spice}
|
|
%package spice
|
|
Summary: Modules and packages for SPICE
|
|
Group: System/Emulators/PC
|
|
Requires: qemu-audio-spice
|
|
Requires: qemu-chardev-spice
|
|
Requires: qemu-headless
|
|
Requires: qemu-hw-display-qxl
|
|
Requires: qemu-hw-usb-redirect
|
|
Requires: qemu-ui-spice-core
|
|
|
|
%description spice
|
|
%{generic_qemu_description}
|
|
|
|
This meta-package brings in, as dependencies, the modules and packages
|
|
necessary for having SPICE working for your VMs.
|
|
|
|
%files spice
|
|
|
|
%package audio-spice
|
|
Summary: Spice based audio support for QEMU
|
|
Group: System/Emulators/PC
|
|
Requires: qemu-ui-spice-core = %{version}-%{release}
|
|
%{qemu_module_conflicts}
|
|
|
|
%description audio-spice
|
|
This package contains a module for Spice based audio support for QEMU.
|
|
|
|
%files audio-spice
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/audio-spice.so
|
|
|
|
%package chardev-spice
|
|
Summary: Spice vmc and port chardev support for QEMU
|
|
Group: System/Emulators/PC
|
|
Requires: qemu-ui-spice-core = %{version}-%{release}
|
|
%{qemu_module_conflicts}
|
|
|
|
%description chardev-spice
|
|
This package contains a module for Spice chardev support for QEMU.
|
|
|
|
%files chardev-spice
|
|
%dir %_datadir/%name
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/chardev-spice.so
|
|
|
|
%package ui-spice-app
|
|
Summary: Spice UI support for QEMU
|
|
Group: System/Emulators/PC
|
|
Requires: qemu-chardev-spice = %{version}-%{release}
|
|
Requires: qemu-ui-spice-core = %{version}-%{release}
|
|
%{qemu_module_conflicts}
|
|
|
|
%description ui-spice-app
|
|
This package contains a module for doing Spice based UI for QEMU.
|
|
|
|
%files ui-spice-app
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/ui-spice-app.so
|
|
|
|
%package ui-spice-core
|
|
Summary: Core Spice support for QEMU
|
|
Group: System/Emulators/PC
|
|
Requires: qemu-ui-opengl
|
|
# This next Requires is only since virt-manager expects audio support
|
|
Requires: qemu-audio-spice = %{version}-%{release}
|
|
%{qemu_module_conflicts}
|
|
|
|
%description ui-spice-core
|
|
This package contains a module with core Spice support for QEMU.
|
|
|
|
%files ui-spice-core
|
|
%dir %_datadir/%name
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/ui-spice-core.so
|
|
|
|
%package hw-display-qxl
|
|
Summary: QXL display support for QEMU
|
|
Group: System/Emulators/PC
|
|
Requires: qemu-ui-spice-core = %{version}-%{release}
|
|
%{qemu_module_conflicts}
|
|
|
|
%description hw-display-qxl
|
|
This package contains a module for QXL display support for QEMU.
|
|
|
|
%files hw-display-qxl
|
|
%dir %_datadir/%name
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/hw-display-qxl.so
|
|
|
|
# End of "with spice"
|
|
%endif
|
|
|
|
%package headless
|
|
Summary: Minimum set of packages for having a functional QEMU
|
|
Group: System/Emulators/PC
|
|
Requires: qemu
|
|
Requires: qemu-block-curl
|
|
Requires: qemu-block-nfs
|
|
Requires: qemu-img
|
|
%if %{has_virtiofsd}
|
|
Requires: virtiofsd
|
|
%endif
|
|
Recommends: qemu-tools
|
|
|
|
%description headless
|
|
%{generic_qemu_description}
|
|
|
|
This meta-package brings in, as dependencies, the minimum set of packages
|
|
currently necessary for having a functional (headless) QEMU/KVM stack.
|
|
|
|
%files headless
|
|
|
|
%package x86
|
|
Summary: Machine emulator and virtualizer for x86 architectures
|
|
Group: System/Emulators/PC
|
|
Requires: %name = %{version}
|
|
Requires: qemu-accel-tcg-x86
|
|
Requires: qemu-ipxe
|
|
Requires: qemu-seabios
|
|
Requires: qemu-vgabios
|
|
%ifarch x86_64
|
|
Requires: qemu-ovmf-x86_64
|
|
%else
|
|
Recommends: qemu-ovmf-ia32
|
|
Recommends: qemu-ovmf-x86_64
|
|
%endif
|
|
Recommends: ovmf
|
|
Recommends: qemu-microvm
|
|
|
|
%description x86
|
|
%{generic_qemu_description}
|
|
|
|
This package provides i386 and x86_64 emulation.
|
|
|
|
%files x86
|
|
%_bindir/qemu-system-i386
|
|
%_bindir/qemu-system-x86_64
|
|
%_datadir/%name/kvmvapic.bin
|
|
%_datadir/%name/linuxboot.bin
|
|
%_datadir/%name/linuxboot_dma.bin
|
|
%_datadir/%name/multiboot.bin
|
|
%_datadir/%name/multiboot_dma.bin
|
|
%_datadir/%name/pvh.bin
|
|
%doc %_docdir/qemu-x86
|
|
|
|
%package ppc
|
|
Summary: Machine emulator and virtualizer for Power architectures
|
|
Group: System/Emulators/PC
|
|
Requires: %name = %{version}
|
|
Requires: qemu-SLOF
|
|
Recommends: qemu-ipxe
|
|
Recommends: qemu-vgabios
|
|
|
|
%description ppc
|
|
%{generic_qemu_description}
|
|
|
|
This package provides ppc and ppc64 emulation.
|
|
|
|
%files ppc
|
|
%_bindir/qemu-system-ppc
|
|
%_bindir/qemu-system-ppc64
|
|
%_datadir/%name/bamboo.dtb
|
|
%_datadir/%name/canyonlands.dtb
|
|
%_datadir/%name/openbios-ppc
|
|
%_datadir/%name/qemu_vga.ndrv
|
|
%_datadir/%name/u-boot.e500
|
|
%_datadir/%name/u-boot-sam460-20100605.bin
|
|
%_datadir/%name/vof*.bin
|
|
%doc %_docdir/qemu-ppc
|
|
|
|
%package s390x
|
|
Summary: Machine emulator and virtualizer for S/390 architectures
|
|
Group: System/Emulators/PC
|
|
Requires: %name = %{version}
|
|
Provides: qemu-s390 = %{version}
|
|
Obsoletes: qemu-s390 < %{version}
|
|
|
|
%description s390x
|
|
%{generic_qemu_description}
|
|
|
|
This package provides s390x emulation.
|
|
|
|
%files s390x
|
|
%_bindir/qemu-system-s390x
|
|
%_datadir/%name/s390-ccw.img
|
|
%_datadir/%name/s390-netboot.img
|
|
%doc %_docdir/qemu-s390x
|
|
|
|
%package arm
|
|
Summary: Machine emulator and virtualizer for ARM architectures
|
|
Group: System/Emulators/PC
|
|
Requires: %name = %{version}
|
|
Recommends: ovmf
|
|
Recommends: qemu-ipxe
|
|
Recommends: qemu-uefi-aarch64
|
|
Recommends: qemu-vgabios
|
|
|
|
%description arm
|
|
%{generic_qemu_description}
|
|
|
|
This package provides arm emulation.
|
|
|
|
%files arm
|
|
%_bindir/qemu-system-arm
|
|
%_bindir/qemu-system-aarch64
|
|
%_datadir/%name/npcm7xx_bootrom.bin
|
|
%doc %_docdir/qemu-arm
|
|
|
|
%package extra
|
|
Summary: Machine emulator and virtualizer for "extra" architectures
|
|
Group: System/Emulators/PC
|
|
Requires: %name = %{version}
|
|
Recommends: qemu-ipxe
|
|
Recommends: qemu-skiboot
|
|
Recommends: qemu-vgabios
|
|
|
|
%description extra
|
|
%{generic_qemu_description}
|
|
|
|
This package provides some lesser used emulations, including alpha, m68k,
|
|
mips, sparc, and xtensa. (The term "extra" is juxtapositioned against more
|
|
popular QEMU packages which are dedicated to a single architecture.)
|
|
|
|
%files extra
|
|
%_bindir/qemu-system-alpha
|
|
%_bindir/qemu-system-avr
|
|
%_bindir/qemu-system-cris
|
|
%_bindir/qemu-system-hppa
|
|
%_bindir/qemu-system-loongarch64
|
|
%_bindir/qemu-system-m68k
|
|
%_bindir/qemu-system-microblaze
|
|
%_bindir/qemu-system-microblazeel
|
|
%_bindir/qemu-system-mips
|
|
%_bindir/qemu-system-mipsel
|
|
%_bindir/qemu-system-mips64
|
|
%_bindir/qemu-system-mips64el
|
|
%_bindir/qemu-system-nios2
|
|
%_bindir/qemu-system-or1k
|
|
%_bindir/qemu-system-riscv32
|
|
%_bindir/qemu-system-riscv64
|
|
%_bindir/qemu-system-rx
|
|
%_bindir/qemu-system-sh4
|
|
%_bindir/qemu-system-sh4eb
|
|
%_bindir/qemu-system-sparc
|
|
%_bindir/qemu-system-sparc64
|
|
%_bindir/qemu-system-tricore
|
|
%_bindir/qemu-system-xtensa
|
|
%_bindir/qemu-system-xtensaeb
|
|
%_datadir/%name/hppa-firmware.img
|
|
%_datadir/%name/hppa-firmware64.img
|
|
%_datadir/%name/openbios-sparc32
|
|
%_datadir/%name/openbios-sparc64
|
|
%_datadir/%name/opensbi-riscv32-generic-fw_dynamic.bin
|
|
%_datadir/%name/opensbi-riscv64-generic-fw_dynamic.bin
|
|
%_datadir/%name/palcode-clipper
|
|
%_datadir/%name/petalogix-ml605.dtb
|
|
%_datadir/%name/petalogix-s3adsp1800.dtb
|
|
%_datadir/%name/QEMU,cgthree.bin
|
|
%_datadir/%name/QEMU,tcx.bin
|
|
|
|
%package lang
|
|
Summary: Translations for QEMU
|
|
Group: System/Emulators/PC
|
|
|
|
%description lang
|
|
This package contains a few language translations, particularly for the
|
|
graphical user interface components that come with QEMU. The bulk of strings
|
|
in QEMU are not localized.
|
|
|
|
%files lang -f %blddir/%name.lang
|
|
|
|
%package audio-alsa
|
|
Summary: ALSA based audio support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description audio-alsa
|
|
This package contains a module for ALSA based audio support for QEMU.
|
|
|
|
%files audio-alsa
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/audio-alsa.so
|
|
|
|
%package audio-dbus
|
|
Summary: D-Bus based audio support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description audio-dbus
|
|
This package provides a module for D-Bus based audio support for QEMU.
|
|
|
|
%files audio-dbus
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/audio-dbus.so
|
|
|
|
%package audio-pa
|
|
Summary: Pulse Audio based audio support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description audio-pa
|
|
This package contains a module for Pulse Audio based audio support for QEMU.
|
|
|
|
%files audio-pa
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/audio-pa.so
|
|
|
|
%package audio-jack
|
|
Summary: JACK based audio support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description audio-jack
|
|
This package contains a module for JACK based audio support for QEMU.
|
|
|
|
%files audio-jack
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/audio-jack.so
|
|
|
|
%package audio-oss
|
|
Summary: OSS based audio support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description audio-oss
|
|
This package contains a module for OSS based audio support for QEMU.
|
|
|
|
%files audio-oss
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/audio-oss.so
|
|
|
|
%package audio-pipewire
|
|
Summary: Pipewire based audio support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description audio-pipewire
|
|
This package contains a module for Pipewire based audio support for QEMU.
|
|
|
|
%files audio-pipewire
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/audio-pipewire.so
|
|
|
|
%package block-curl
|
|
Summary: cURL block support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description block-curl
|
|
This package contains a module for accessing network-based image files over
|
|
a network connection from qemu-img tool and QEMU system emulation.
|
|
|
|
%files block-curl
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/block-curl.so
|
|
|
|
%package block-dmg
|
|
Summary: DMG block support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description block-dmg
|
|
This package contains a module for accessing Mac OS X image files from
|
|
qemu-img tool and QEMU system emulation.
|
|
|
|
%files block-dmg
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/block-dmg-bz2.so
|
|
%_libdir/%name/block-dmg-lzfse.so
|
|
|
|
%package block-gluster
|
|
Summary: GlusterFS block support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description block-gluster
|
|
This package contains a module for accessing network-based image files over a
|
|
GlusterFS network connection from qemu-img tool and QEMU system emulation.
|
|
|
|
%files block-gluster
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/block-gluster.so
|
|
|
|
%package block-iscsi
|
|
Summary: iSCSI block support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description block-iscsi
|
|
This package contains a module for accessing network-based image files over an
|
|
iSCSI network connection from qemu-img tool and QEMU system emulation.
|
|
|
|
%files block-iscsi
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/block-iscsi.so
|
|
|
|
%package block-nfs
|
|
Summary: direct Network File System support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description block-nfs
|
|
This package contains a module for directly accessing nfs based image files
|
|
for QEMU.
|
|
|
|
%files block-nfs
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/block-nfs.so
|
|
|
|
%package block-ssh
|
|
Summary: SSH (SFTP) block support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description block-ssh
|
|
This package contains a module for accessing network-based image files over an
|
|
SSH network connection from qemu-img tool and QEMU system emulation.
|
|
|
|
%files block-ssh
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/block-ssh.so
|
|
|
|
%package chardev-baum
|
|
Summary: Baum braille chardev support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description chardev-baum
|
|
This package contains a module for baum braille chardev support for QEMU.
|
|
|
|
%files chardev-baum
|
|
%dir %_datadir/%name
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/chardev-baum.so
|
|
|
|
%package hw-display-virtio-gpu
|
|
Summary: Virtio GPU display support for QEMU
|
|
Group: System/Emulators/PC
|
|
# Make sure that VGA is pretty much always there. Technically, this isn't
|
|
# really necessary (and/or, should be dealt with in other places) but it
|
|
# makes it easier to deal with strange situation where, e.g., GRUB is
|
|
# configured to work only with a graphical terminal (see bsc#1219164),
|
|
# and the hw-display-virtio-vga package is small enough, anyway.
|
|
Requires: qemu-hw-display-virtio-vga = %{version}-%{release}
|
|
%{qemu_module_conflicts}
|
|
|
|
%description hw-display-virtio-gpu
|
|
This package contains a module for Virtio GPU display support for QEMU.
|
|
|
|
%files hw-display-virtio-gpu
|
|
%dir %_datadir/%name
|
|
%_libdir/%name/hw-display-virtio-gpu.so
|
|
%_libdir/%name/hw-display-virtio-gpu-gl.so
|
|
|
|
%package hw-display-virtio-gpu-pci
|
|
Summary: Virtio-gpu pci device for QEMU
|
|
Group: System/Emulators/PC
|
|
Requires: qemu-hw-display-virtio-gpu = %{version}-%{release}
|
|
%{qemu_module_conflicts}
|
|
|
|
%description hw-display-virtio-gpu-pci
|
|
This package contains a module providing the virtio gpu pci device for QEMU.
|
|
|
|
%files hw-display-virtio-gpu-pci
|
|
%dir %_datadir/%name
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/hw-display-virtio-gpu-pci.so
|
|
%_libdir/%name/hw-display-virtio-gpu-pci-gl.so
|
|
|
|
%package hw-display-virtio-vga
|
|
Summary: Virtio vga device for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description hw-display-virtio-vga
|
|
This package contains a module providing the virtio vga device for QEMU.
|
|
|
|
%files hw-display-virtio-vga
|
|
%dir %_datadir/%name
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/hw-display-virtio-vga.so
|
|
%_libdir/%name/hw-display-virtio-vga-gl.so
|
|
|
|
%package hw-s390x-virtio-gpu-ccw
|
|
Summary: S390x virtio-gpu ccw device for QEMU
|
|
Group: System/Emulators/PC
|
|
Requires: qemu-hw-display-virtio-gpu = %{version}-%{release}
|
|
%{qemu_module_conflicts}
|
|
|
|
%description hw-s390x-virtio-gpu-ccw
|
|
This package contains a module providing the s390x virtio gpu ccw device for
|
|
QEMU.
|
|
|
|
%files hw-s390x-virtio-gpu-ccw
|
|
%dir %_datadir/%name
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/hw-s390x-virtio-gpu-ccw.so
|
|
|
|
%package hw-usb-redirect
|
|
Summary: USB redirection support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description hw-usb-redirect
|
|
This package contains a module for USB redirection support for QEMU.
|
|
|
|
%files hw-usb-redirect
|
|
%dir %_datadir/%name
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/hw-usb-redirect.so
|
|
|
|
%package hw-usb-smartcard
|
|
Summary: USB smartcard support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description hw-usb-smartcard
|
|
This package contains a modules for USB smartcard support for QEMU.
|
|
|
|
%files hw-usb-smartcard
|
|
%dir %_datadir/%name
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/hw-usb-smartcard.so
|
|
|
|
%package hw-usb-host
|
|
Summary: USB passthrough driver support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description hw-usb-host
|
|
This package contains a modules for USB passthrough driver for QEMU.
|
|
|
|
%files hw-usb-host
|
|
%dir %_datadir/%name
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/hw-usb-host.so
|
|
|
|
%package ui-dbus
|
|
Summary: D-Bus based UI support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description ui-dbus
|
|
This package contains a module for doing D-Bus based UI for QEMU.
|
|
|
|
%files ui-dbus
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/ui-dbus.so
|
|
|
|
%package ui-curses
|
|
Summary: Curses based UI support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description ui-curses
|
|
This package contains a module for doing curses based UI for QEMU.
|
|
|
|
%files ui-curses
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/ui-curses.so
|
|
|
|
%package ui-gtk
|
|
Summary: GTK based UI support for QEMU
|
|
Group: System/Emulators/PC
|
|
Requires: qemu-ui-opengl
|
|
Supplements: (qemu and libgtk-3-0)
|
|
%{qemu_module_conflicts}
|
|
|
|
%description ui-gtk
|
|
This package contains a module for doing GTK based UI for QEMU.
|
|
|
|
%files ui-gtk
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/ui-gtk.so
|
|
|
|
%package ui-opengl
|
|
Summary: OpenGL based UI support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description ui-opengl
|
|
This package contains a module for doing OpenGL based UI for QEMU.
|
|
|
|
%files ui-opengl
|
|
%dir %_datadir/%name
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/ui-egl-headless.so
|
|
%_libdir/%name/ui-opengl.so
|
|
|
|
%package vhost-user-gpu
|
|
Summary: Vhost user mode virtio-gpu 2D/3D rendering backend for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description vhost-user-gpu
|
|
This package contains a vhost user mode virtio-gpu 2D/3D rendering backend for
|
|
QEMU.
|
|
|
|
%files vhost-user-gpu
|
|
%dir %_datadir/%name/vhost-user
|
|
%_datadir/%name/vhost-user/50-qemu-gpu.json
|
|
%_libexecdir/vhost-user-gpu
|
|
|
|
%package img
|
|
Summary: QEMU disk image utility
|
|
Group: System/Emulators/PC
|
|
|
|
%description img
|
|
This package provides command line tools for manipulating disk images.
|
|
|
|
%files img
|
|
%_bindir/qemu-img
|
|
%_bindir/qemu-io
|
|
%_bindir/qemu-nbd
|
|
%_bindir/qemu-storage-daemon
|
|
%_mandir/man1/qemu-img.1.gz
|
|
%_mandir/man8/qemu-nbd.8.gz
|
|
%_mandir/man1/qemu-storage-daemon.1.gz
|
|
%_mandir/man7/qemu-storage-daemon-qmp-ref.7.gz
|
|
|
|
%package pr-helper
|
|
Summary: QEMU persistent reservation helper
|
|
Group: System/Emulators/PC
|
|
|
|
%description pr-helper
|
|
This package provides a helper utility for SCSI persistent reservations.
|
|
|
|
%files pr-helper
|
|
%_bindir/qemu-pr-helper
|
|
%_mandir/man8/qemu-pr-helper.8.gz
|
|
|
|
%package tools
|
|
Summary: Tools for QEMU
|
|
Group: System/Emulators/PC
|
|
Requires(pre): permissions
|
|
Requires: qemu-img
|
|
Requires: qemu-pr-helper
|
|
Requires: group(kvm)
|
|
%if %{has_virtiofsd}
|
|
Requires: virtiofsd
|
|
%endif
|
|
Recommends: multipath-tools
|
|
Recommends: qemu-block-curl
|
|
%if 0%{?with_rbd}
|
|
Recommends: qemu-block-rbd
|
|
%endif
|
|
|
|
%description tools
|
|
This package contains various QEMU related tools, including a bridge helper,
|
|
a virtfs helper, ivshmem, disk utilities and scripts for various purposes.
|
|
|
|
%files tools
|
|
%_bindir/analyze-migration.py
|
|
%_bindir/qemu-edid
|
|
%_bindir/qemu-keymap
|
|
%_bindir/vmstate-static-checker.py
|
|
%_bindir/vmxcap
|
|
%verify(not mode) %attr(4750,root,kvm) %_libexecdir/qemu-bridge-helper
|
|
%_libexecdir/virtfs-proxy-helper
|
|
%_mandir/man1/virtfs-proxy-helper.1.gz
|
|
%dir %_sysconfdir/%name
|
|
%config(noreplace) %_sysconfdir/%name/bridge.conf
|
|
|
|
%post tools
|
|
%set_permissions %_libexecdir/qemu-bridge-helper
|
|
|
|
%verifyscript tools
|
|
%verify_permissions %_libexecdir/qemu-bridge-helper
|
|
|
|
%package ivshmem-tools
|
|
Summary: Inter-VM Shared Memory Tools for QEMU
|
|
Group: System/Emulators/PC
|
|
|
|
%description ivshmem-tools
|
|
This package contains a sample shared memory client and server which utilize
|
|
QEMU's Inter-VM shared memory device as specified by the ivshmem client-server
|
|
protocol specification documented in docs/specs/ivshmem-spec.txt in QEMU source
|
|
code.
|
|
|
|
%files ivshmem-tools
|
|
%dir %_datadir/%name
|
|
%_bindir/ivshmem-client
|
|
%_bindir/ivshmem-server
|
|
|
|
%package guest-agent
|
|
Summary: Guest agent for QEMU
|
|
Group: System/Emulators/PC
|
|
Requires: group(kvm)
|
|
Requires(post): udev
|
|
Supplements: modalias(acpi*:QEMU0002%3A*)
|
|
Supplements: modalias(pci:v00005853d00000001sv*sd*bc*sc*i*)
|
|
Supplements: modalias(pci:v0000FFFDd00000101sv*sd*bc*sc*i*)
|
|
%{?systemd_ordering}
|
|
|
|
%description guest-agent
|
|
This package contains the QEMU guest agent. It is installed in the linux guest
|
|
to provide information and control at the guest OS level.
|
|
|
|
%files guest-agent
|
|
%attr(0755,root,kvm) %_bindir/qemu-ga
|
|
%_mandir/man8/qemu-ga.8.gz
|
|
%{_unitdir}/qemu-guest-agent.service
|
|
/usr/lib/udev/rules.d/80-qemu-ga.rules
|
|
|
|
%pre guest-agent
|
|
%service_add_pre qemu-guest-agent.service
|
|
|
|
%post guest-agent
|
|
%service_add_post qemu-guest-agent.service
|
|
if [ -e /dev/virtio-ports/org.qemu.guest_agent.0 ]; then
|
|
/usr/bin/systemctl start qemu-guest-agent.service || :
|
|
fi
|
|
|
|
%preun guest-agent
|
|
if [ -e /dev/virtio-ports/org.qemu.guest_agent.0 ]; then
|
|
/usr/bin/systemctl stop qemu-guest-agent.service || :
|
|
fi
|
|
|
|
%postun guest-agent
|
|
%service_del_postun_without_restart qemu-guest-agent.service
|
|
if [ "$1" = "1" ] ; then
|
|
if [ -e /dev/virtio-ports/org.qemu.guest_agent.0 ]; then
|
|
/usr/bin/systemctl restart qemu-guest-agent.service || :
|
|
fi
|
|
fi
|
|
|
|
%package ksm
|
|
Summary: Kernel Samepage Merging services
|
|
Group: System/Emulators/PC
|
|
Requires(pre): coreutils
|
|
Requires(post): coreutils
|
|
|
|
%description ksm
|
|
Kernel Samepage Merging (KSM) is a memory-saving de-duplication feature, that
|
|
merges anonymous (private) pages (not pagecache ones).
|
|
|
|
This package provides a service file for starting and stopping KSM.
|
|
|
|
%files ksm
|
|
%{_unitdir}/ksm.service
|
|
|
|
%pre ksm
|
|
%service_add_pre ksm.service
|
|
|
|
%post ksm
|
|
%service_add_post ksm.service
|
|
|
|
%preun ksm
|
|
%service_del_preun ksm.service
|
|
|
|
%postun ksm
|
|
%service_del_postun ksm.service
|
|
|
|
%package accel-tcg-x86
|
|
Summary: TCG accelerator for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description accel-tcg-x86
|
|
TCG is the QEMU binary translator, responsible for converting from target to
|
|
host instruction set.
|
|
|
|
This package provides the TCG accelerator for QEMU.
|
|
|
|
%files accel-tcg-x86
|
|
%dir %_datadir/%name
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/accel-tcg-i386.so
|
|
%_libdir/%name/accel-tcg-x86_64.so
|
|
|
|
%package accel-qtest
|
|
Summary: QTest accelerator for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description accel-qtest
|
|
QTest is a device emulation testing framework. It is useful to test device
|
|
models.
|
|
|
|
This package provides QTest accelerator for testing QEMU.
|
|
|
|
%files accel-qtest
|
|
%dir %_datadir/%name
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/accel-qtest-aarch64.so
|
|
%_libdir/%name/accel-qtest-alpha.so
|
|
%_libdir/%name/accel-qtest-arm.so
|
|
%_libdir/%name/accel-qtest-avr.so
|
|
%_libdir/%name/accel-qtest-cris.so
|
|
%_libdir/%name/accel-qtest-hppa.so
|
|
%_libdir/%name/accel-qtest-i386.so
|
|
%_libdir/%name/accel-qtest-loongarch64.so
|
|
%_libdir/%name/accel-qtest-m68k.so
|
|
%_libdir/%name/accel-qtest-microblaze.so
|
|
%_libdir/%name/accel-qtest-microblazeel.so
|
|
%_libdir/%name/accel-qtest-mips.so
|
|
%_libdir/%name/accel-qtest-mips64.so
|
|
%_libdir/%name/accel-qtest-mips64el.so
|
|
%_libdir/%name/accel-qtest-mipsel.so
|
|
%_libdir/%name/accel-qtest-nios2.so
|
|
%_libdir/%name/accel-qtest-or1k.so
|
|
%_libdir/%name/accel-qtest-ppc.so
|
|
%_libdir/%name/accel-qtest-ppc64.so
|
|
%_libdir/%name/accel-qtest-riscv32.so
|
|
%_libdir/%name/accel-qtest-riscv64.so
|
|
%_libdir/%name/accel-qtest-rx.so
|
|
%_libdir/%name/accel-qtest-s390x.so
|
|
%_libdir/%name/accel-qtest-sh4.so
|
|
%_libdir/%name/accel-qtest-sh4eb.so
|
|
%_libdir/%name/accel-qtest-sparc.so
|
|
%_libdir/%name/accel-qtest-sparc64.so
|
|
%_libdir/%name/accel-qtest-tricore.so
|
|
%_libdir/%name/accel-qtest-x86_64.so
|
|
%_libdir/%name/accel-qtest-xtensa.so
|
|
%_libdir/%name/accel-qtest-xtensaeb.so
|
|
|
|
%if 0%{?with_rbd}
|
|
%package block-rbd
|
|
Summary: Rados Block Device (Ceph) support for QEMU
|
|
Group: System/Emulators/PC
|
|
%{qemu_module_conflicts}
|
|
|
|
%description block-rbd
|
|
This package contains a module for accessing ceph (rbd,rados) image files
|
|
for QEMU.
|
|
|
|
%files block-rbd
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/block-rbd.so
|
|
# End of "if with_rbd"
|
|
%endif
|
|
|
|
%if %{build_ppc_firmware}
|
|
%package SLOF
|
|
Summary: Slimline Open Firmware - SLOF
|
|
Group: System/Emulators/PC
|
|
BuildArch: noarch
|
|
|
|
%description SLOF
|
|
Slimline Open Firmware (SLOF) is an implementation of the IEEE 1275 standard.
|
|
It can be used as partition firmware for pSeries machines running on QEMU or KVM.
|
|
|
|
%files SLOF
|
|
%dir %_datadir/%name
|
|
%_datadir/%name/slof.bin
|
|
|
|
%package skiboot
|
|
Summary: OPAL firmware (aka skiboot), used in booting OpenPOWER systems
|
|
Group: System/Emulators/PC
|
|
BuildArch: noarch
|
|
Requires(post): update-alternatives
|
|
Requires(postun): update-alternatives
|
|
|
|
%description skiboot
|
|
Provides OPAL (OpenPower Abstraction Layer) firmware, aka skiboot, as
|
|
traditionally packaged with QEMU.
|
|
|
|
%files skiboot
|
|
%dir %_datadir/%name
|
|
%_datadir/%name/skiboot.lid
|
|
%_datadir/%name/skiboot.lid.qemu
|
|
%ghost %_sysconfdir/alternatives/skiboot.lid
|
|
|
|
%post skiboot
|
|
update-alternatives --install \
|
|
%{_datadir}/%name/skiboot.lid skiboot.lid %{_datadir}/%name/skiboot.lid.qemu 15
|
|
|
|
%preun skiboot
|
|
if [ ! -f %{_datadir}/%name/skiboot.lid.qemu ] ; then
|
|
update-alternatives --remove skiboot.lid %{_datadir}/%name/skiboot.lid.qemu
|
|
fi
|
|
# End of "if build_ppc_firmware"
|
|
%endif
|
|
|
|
%if %{build_x86_firmware}
|
|
%package microvm
|
|
Summary: x86 MicroVM firmware for QEMU
|
|
Group: System/Emulators/PC
|
|
BuildArch: noarch
|
|
|
|
%description microvm
|
|
This package provides minimal x86 firmware for booting certain guests under
|
|
QEMU. qboot provides the minimum resources needed to boot PVH and bzImages.
|
|
bios-microvm, created from a minimal seabios configuration, provides slightly
|
|
wider support than qboot, but still focuses on quick boot up.
|
|
|
|
%files microvm
|
|
%dir %_datadir/%name
|
|
%_datadir/%name/bios-microvm.bin
|
|
%_datadir/%name/qboot.rom
|
|
|
|
%package seabios
|
|
Summary: x86 Legacy BIOS for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: 9.0.2%{sbver}
|
|
Release: 0
|
|
BuildArch: noarch
|
|
Conflicts: %name < 1.6.0
|
|
|
|
%description seabios
|
|
SeaBIOS is an open source implementation of a 16bit x86 BIOS. SeaBIOS
|
|
is the default and legacy BIOS for QEMU.
|
|
|
|
%files seabios
|
|
%dir %_datadir/%name
|
|
%_datadir/%name/bios.bin
|
|
%_datadir/%name/bios-256k.bin
|
|
%_datadir/%name/firmware/50-seabios-256k.json
|
|
%_datadir/%name/firmware/60-seabios-128k.json
|
|
%license roms/seabios/COPYING
|
|
%doc %_docdir/qemu-seabios
|
|
|
|
%package vgabios
|
|
Summary: VGA BIOSes for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: 9.0.2%{sbver}
|
|
Release: 0
|
|
BuildArch: noarch
|
|
Conflicts: %name < 1.6.0
|
|
|
|
%description vgabios
|
|
VGABIOS provides the video ROM BIOSes for the following variants of VGA
|
|
emulated devices: Std VGA, QXL, Cirrus CLGD 5446 and VMware emulated
|
|
video card. For use with QEMU.
|
|
|
|
%files vgabios
|
|
%dir %_datadir/%name
|
|
%_datadir/%name/vgabios.bin
|
|
%_datadir/%name/vgabios-ati.bin
|
|
%_datadir/%name/vgabios-bochs-display.bin
|
|
%_datadir/%name/vgabios-cirrus.bin
|
|
%_datadir/%name/vgabios-qxl.bin
|
|
%_datadir/%name/vgabios-ramfb.bin
|
|
%_datadir/%name/vgabios-stdvga.bin
|
|
%_datadir/%name/vgabios-virtio.bin
|
|
%_datadir/%name/vgabios-vmware.bin
|
|
%license roms/seabios/COPYING
|
|
|
|
%package ipxe
|
|
Summary: PXE ROMs for QEMU NICs
|
|
Group: System/Emulators/PC
|
|
Version: 9.0.2
|
|
Release: 0
|
|
BuildArch: noarch
|
|
Conflicts: %name < 1.6.0
|
|
|
|
%description ipxe
|
|
Provides Preboot Execution Environment (PXE) ROM support for various emulated
|
|
network adapters available with QEMU.
|
|
|
|
%files ipxe
|
|
%dir %_datadir/%name
|
|
%_datadir/%name/efi-e1000.rom
|
|
%_datadir/%name/efi-e1000e.rom
|
|
%_datadir/%name/efi-eepro100.rom
|
|
%_datadir/%name/efi-ne2k_pci.rom
|
|
%_datadir/%name/efi-pcnet.rom
|
|
%_datadir/%name/efi-rtl8139.rom
|
|
%_datadir/%name/efi-virtio.rom
|
|
%_datadir/%name/efi-vmxnet3.rom
|
|
%_datadir/%name/pxe-e1000.rom
|
|
%_datadir/%name/pxe-eepro100.rom
|
|
%_datadir/%name/pxe-ne2k_pci.rom
|
|
%_datadir/%name/pxe-pcnet.rom
|
|
%_datadir/%name/pxe-rtl8139.rom
|
|
%_datadir/%name/pxe-virtio.rom
|
|
# End of "if build_x86_firmware"
|
|
%endif
|
|
|
|
%package doc
|
|
Summary: Documentation for QEMU
|
|
Group: System/Emulators/PC
|
|
BuildArch: noarch
|
|
Suggests: qemu
|
|
|
|
%files doc
|
|
%doc %_docdir/%name
|
|
|
|
%description doc
|
|
%{generic_qemu_description}
|
|
|
|
This package contains user and developer documentation for QEMU.
|
|
|
|
%changelog
|