Dario Faggioli
5f7cc8fe5e
- Substantial rework of the spec file:
* the 'make check' testsuite now runs in the %check section of
the main package, not in a subpackage
* switched from %setup to %autosetup
* rearranged the content in order to minimize the use of %if,
%ifarch, etc
- Properly fix bsc#1198038, CVE-2022-0216
* Patches added:
scsi-lsi53c895a-really-fix-use-after-fre.patch
tests-qtest-Move-the-fuzz-tests-to-x86-o.patch
- Make temp dir (for update_git.sh) configurable
- Added new subpackages (audio-dbus, ui-dbus)
- bsc#1199018 was never fixed in Factory's QEMU 6.2. It is
now (since the patches are already in SeaBIOS 1.16.0)
- Some tests are having issues when run in OBS. They seem to be
due to race conditions, triggered by resource constraints of
OBS workers. Let's disable them for now, while looking for a fix
- Update to v7.0.0. For full release notese, see:
* https://wiki.qemu.org/ChangeLog/7.0
Be sure to also check the following pages:
* https://qemu-project.gitlab.io/qemu/about/removed-features.html
* https://qemu-project.gitlab.io/qemu/about/deprecated.html
Some notable changes:
* [ARM] The virt board has gained a new control knob to disable passing a RNG seed in the DTB (dtb-kaslr-seed)
* [ARM] The AST2600 SoC now supports a dummy version of the i3c device
* [ARM] The virt board can now run guests with KVM on hosts with restricted IPA ranges
* [ARM] The virt board now supports virtio-mem-pci
* [ARM] The virt board now supports specifying the guest CPU topology
* [ARM] On the virt board, we now enable PAuth when using KVM or hvf and the host CPU supports it
* [RISC-V] Add support for ratified 1.0 Vector extension
* [RISC-V] Support for the Zve64f and Zve32f extensions
* [RISC-V] Drop support for draft 0.7.1 Vector extension
* [RISC-V] Support Zfhmin and Zfh extensions
* [RISC-V] RISC-V KVM support
* [RISC-V] Mark Hypervisor extension as non experimental
* [RISC-V] Enable Hypervisor extension by default
* [x86] Support for Intel AMX.
* [PCI/PCIe] Q35: fix PCIe device becoming disabled after migration when ACPI based PCI hotplug is used (6b0969f1ec)
* [PCI/PCIe] initial bits of SR/IOV support (250346169)
* [PCI/PCIe] arm/virt: fixed PXB interrupt routing (e609301b45)
* [PCI/PCIe] arm/virt: support for virtio-mem-pci (b1b87327a9)
* [virtiofs] Fix for CVE-2022-0358 - behaviour with supplementary groups and SGID directories
* [virtiofs] Improved security label support
* [virtiofs] The virtiofsd in qemu is now starting to be deprecated; please start using and contributing to Rust virtiofsd
* Patches dropped:
acpi-validate-hotplug-selector-on-access.patch
block-backend-Retain-permissions-after-m.patch
block-qdict-Fix-Werror-maybe-uninitializ.patch
brotli-fix-actual-variable-array-paramet.patch
display-qxl-render-fix-race-condition-in.patch
doc-Add-the-SGX-numa-description.patch
hw-i386-amd_iommu-Fix-maybe-uninitialize.patch
hw-intc-exynos4210_gic-provide-more-room.patch
hw-nvme-fix-CVE-2021-3929.patch
hw-nvram-at24-return-0xff-if-1-byte-addr.patch
iotest-065-explicit-compression-type.patch
iotest-214-explicit-compression-type.patch
iotest-302-use-img_info_log-helper.patch
iotest-303-explicit-compression-type.patch
iotest-39-use-_qcow2_dump_header.patch
iotests-60-more-accurate-set-dirty-bit-i.patch
iotests-bash-tests-filter-compression-ty.patch
iotests-common.rc-introduce-_qcow2_dump_.patch
iotests-declare-lack-of-support-for-comp.patch
iotests-drop-qemu_img_verbose-helper.patch
iotests-massive-use-_qcow2_dump_header.patch
iotests-MRCE-Write-data-to-source.patch
iotests.py-filter-out-successful-output-.patch
iotests.py-img_info_log-rename-imgopts-a.patch
iotests.py-implement-unsupported_imgopts.patch
iotests.py-qemu_img-create-support-IMGOP.patch
iotests.py-rewrite-default-luks-support-.patch
iotests-specify-some-unsupported_imgopts.patch
meson-build-all-modules-by-default.patch
numa-Enable-numa-for-SGX-EPC-sections.patch
numa-Support-SGX-numa-in-the-monitor-and.patch
python-aqmp-add-__del__-method-to-legacy.patch
python-aqmp-add-_session_guard.patch
python-aqmp-add-SocketAddrT-to-package-r.patch
python-aqmp-add-socket-bind-step-to-lega.patch
python-aqmp-add-start_server-and-accept-.patch
python-aqmp-copy-type-definitions-from-q.patch
python-aqmp-drop-_bind_hack.patch
python-aqmp-fix-docstring-typo.patch
python-aqmp-Fix-negotiation-with-pre-oob.patch
python-aqmp-fix-race-condition-in-legacy.patch
Python-aqmp-fix-type-definitions-for-myp.patch
python-aqmp-handle-asyncio.TimeoutError-.patch
python-aqmp-refactor-_do_accept-into-two.patch
python-aqmp-remove-_new_session-and-_est.patch
python-aqmp-rename-accept-to-start_serve.patch
python-aqmp-rename-AQMPError-to-QMPError.patch
python-aqmp-split-_client_connected_cb-o.patch
python-aqmp-squelch-pylint-warning-for-t.patch
python-aqmp-stop-the-server-during-disco.patch
python-introduce-qmp-shell-wrap-convenie.patch
python-machine-raise-VMLaunchFailure-exc.patch
python-move-qmp-shell-under-the-AQMP-pac.patch
python-move-qmp-utilities-to-python-qemu.patch
python-qmp-switch-qmp-shell-to-AQMP.patch
python-support-recording-QMP-session-to-.patch
python-upgrade-mypy-to-0.780.patch
qcow2-simple-case-support-for-downgradin.patch
qemu-binfmt-conf.sh-should-use-F-as-shor.patch
tests-qemu-iotests-040-Skip-TestCommitWi.patch
tests-qemu-iotests-Fix-051-for-binaries-.patch
tests-qemu-iotests-testrunner-Quote-case.patch
tools-virtiofsd-Add-rseq-syscall-to-the-.patch
ui-cursor-fix-integer-overflow-in-cursor.patch
vhost-vsock-detach-the-virqueue-element-.patch
virtiofsd-Drop-membership-of-all-supplem.patch
virtio-net-fix-map-leaking-on-error-duri.patch
Disable-some-tests-that-have-problems-in.patch
* Patches added:
intc-exynos4210_gic-replace-snprintf-wit.patch
Revert-8dcb404bff6d9147765d7dd3e9c849337.patch
------------------------------------------------------------------
- Fix bsc#1197084
* Patches added:
hostmem-default-the-amount-of-prealloc-t.patch
- Get rid of downstream patches breaking s390 modules. Replace
them with the upstream proposed and Acked (but never committed)
solution (bsc#1199015)
* Patches added:
modules-generates-per-target-modinfo.patch
modules-introduces-module_kconfig-direct.patch
* Patches dropped:
Fix-the-module-building-problem-for-s390.patch
modules-quick-fix-a-fundamental-error-in.patch
- backport patches for having coroutine work well when LTO is used
* Patches added:
coroutine-ucontext-use-QEMU_DEFINE_STATI.patch
coroutine-use-QEMU_DEFINE_STATIC_CO_TLS.patch
coroutine-win32-use-QEMU_DEFINE_STATIC_C.patch
- seabios: drop patch that changes python in python2.
Just go to python3 directly.
* Patches dropped:
seabios-use-python2-explicitly-as-needed.patch
OBS-URL: https://build.opensuse.org/request/show/990667
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=726
42 lines
1.7 KiB
Diff
42 lines
1.7 KiB
Diff
From: Olaf Hering <olaf@aepfle.de>
|
|
Date: Tue, 8 Jan 2019 14:20:08 +0100
|
|
Subject: xen: ignore live parameter from xen-save-devices-state
|
|
|
|
References: bsc#1079730, bsc#1101982, bsc#1063993
|
|
|
|
The final step of xl migrate|save for an HVM domU is saving the state of
|
|
qemu. This also involves releasing all block devices. While releasing
|
|
backends ought to be a separate step, such functionality is not
|
|
implemented.
|
|
|
|
Unfortunately, releasing the block devices depends on the optional
|
|
'live' option. This breaks offline migration with 'virsh migrate domU
|
|
dom0' because the sending side does not release the disks, as a result
|
|
the receiving side can not properly claim write access to the disks.
|
|
|
|
As a minimal fix, remove the dependency on the 'live' option. Upstream
|
|
may fix this in a different way, like removing the newly added 'live'
|
|
parameter entirely.
|
|
|
|
Fixes: 5d6c599fe1 ("migration, xen: Fix block image lock issue on live migration")
|
|
|
|
Signed-off-by: Olaf Hering <olaf@aepfle.de>
|
|
Signed-off-by: Bruce Rogers <brogers@suse.com>
|
|
---
|
|
migration/savevm.c | 2 +-
|
|
1 file changed, 1 insertion(+), 1 deletion(-)
|
|
|
|
diff --git a/migration/savevm.c b/migration/savevm.c
|
|
index 02ed94c180661c99970aebfe16a0..52251cf0afd48f919ad705544bf2 100644
|
|
--- a/migration/savevm.c
|
|
+++ b/migration/savevm.c
|
|
@@ -2966,7 +2966,7 @@ void qmp_xen_save_devices_state(const char *filename, bool has_live, bool live,
|
|
* So call bdrv_inactivate_all (release locks) here to let the other
|
|
* side of the migration take control of the images.
|
|
*/
|
|
- if (live && !saved_vm_running) {
|
|
+ if (!saved_vm_running) {
|
|
ret = bdrv_inactivate_all();
|
|
if (ret) {
|
|
error_setg(errp, "%s: bdrv_inactivate_all() failed (%d)",
|