Dario Faggioli
5f7cc8fe5e
- Substantial rework of the spec file:
* the 'make check' testsuite now runs in the %check section of
the main package, not in a subpackage
* switched from %setup to %autosetup
* rearranged the content in order to minimize the use of %if,
%ifarch, etc
- Properly fix bsc#1198038, CVE-2022-0216
* Patches added:
scsi-lsi53c895a-really-fix-use-after-fre.patch
tests-qtest-Move-the-fuzz-tests-to-x86-o.patch
- Make temp dir (for update_git.sh) configurable
- Added new subpackages (audio-dbus, ui-dbus)
- bsc#1199018 was never fixed in Factory's QEMU 6.2. It is
now (since the patches are already in SeaBIOS 1.16.0)
- Some tests are having issues when run in OBS. They seem to be
due to race conditions, triggered by resource constraints of
OBS workers. Let's disable them for now, while looking for a fix
- Update to v7.0.0. For full release notese, see:
* https://wiki.qemu.org/ChangeLog/7.0
Be sure to also check the following pages:
* https://qemu-project.gitlab.io/qemu/about/removed-features.html
* https://qemu-project.gitlab.io/qemu/about/deprecated.html
Some notable changes:
* [ARM] The virt board has gained a new control knob to disable passing a RNG seed in the DTB (dtb-kaslr-seed)
* [ARM] The AST2600 SoC now supports a dummy version of the i3c device
* [ARM] The virt board can now run guests with KVM on hosts with restricted IPA ranges
* [ARM] The virt board now supports virtio-mem-pci
* [ARM] The virt board now supports specifying the guest CPU topology
* [ARM] On the virt board, we now enable PAuth when using KVM or hvf and the host CPU supports it
* [RISC-V] Add support for ratified 1.0 Vector extension
* [RISC-V] Support for the Zve64f and Zve32f extensions
* [RISC-V] Drop support for draft 0.7.1 Vector extension
* [RISC-V] Support Zfhmin and Zfh extensions
* [RISC-V] RISC-V KVM support
* [RISC-V] Mark Hypervisor extension as non experimental
* [RISC-V] Enable Hypervisor extension by default
* [x86] Support for Intel AMX.
* [PCI/PCIe] Q35: fix PCIe device becoming disabled after migration when ACPI based PCI hotplug is used (6b0969f1ec)
* [PCI/PCIe] initial bits of SR/IOV support (250346169)
* [PCI/PCIe] arm/virt: fixed PXB interrupt routing (e609301b45)
* [PCI/PCIe] arm/virt: support for virtio-mem-pci (b1b87327a9)
* [virtiofs] Fix for CVE-2022-0358 - behaviour with supplementary groups and SGID directories
* [virtiofs] Improved security label support
* [virtiofs] The virtiofsd in qemu is now starting to be deprecated; please start using and contributing to Rust virtiofsd
* Patches dropped:
acpi-validate-hotplug-selector-on-access.patch
block-backend-Retain-permissions-after-m.patch
block-qdict-Fix-Werror-maybe-uninitializ.patch
brotli-fix-actual-variable-array-paramet.patch
display-qxl-render-fix-race-condition-in.patch
doc-Add-the-SGX-numa-description.patch
hw-i386-amd_iommu-Fix-maybe-uninitialize.patch
hw-intc-exynos4210_gic-provide-more-room.patch
hw-nvme-fix-CVE-2021-3929.patch
hw-nvram-at24-return-0xff-if-1-byte-addr.patch
iotest-065-explicit-compression-type.patch
iotest-214-explicit-compression-type.patch
iotest-302-use-img_info_log-helper.patch
iotest-303-explicit-compression-type.patch
iotest-39-use-_qcow2_dump_header.patch
iotests-60-more-accurate-set-dirty-bit-i.patch
iotests-bash-tests-filter-compression-ty.patch
iotests-common.rc-introduce-_qcow2_dump_.patch
iotests-declare-lack-of-support-for-comp.patch
iotests-drop-qemu_img_verbose-helper.patch
iotests-massive-use-_qcow2_dump_header.patch
iotests-MRCE-Write-data-to-source.patch
iotests.py-filter-out-successful-output-.patch
iotests.py-img_info_log-rename-imgopts-a.patch
iotests.py-implement-unsupported_imgopts.patch
iotests.py-qemu_img-create-support-IMGOP.patch
iotests.py-rewrite-default-luks-support-.patch
iotests-specify-some-unsupported_imgopts.patch
meson-build-all-modules-by-default.patch
numa-Enable-numa-for-SGX-EPC-sections.patch
numa-Support-SGX-numa-in-the-monitor-and.patch
python-aqmp-add-__del__-method-to-legacy.patch
python-aqmp-add-_session_guard.patch
python-aqmp-add-SocketAddrT-to-package-r.patch
python-aqmp-add-socket-bind-step-to-lega.patch
python-aqmp-add-start_server-and-accept-.patch
python-aqmp-copy-type-definitions-from-q.patch
python-aqmp-drop-_bind_hack.patch
python-aqmp-fix-docstring-typo.patch
python-aqmp-Fix-negotiation-with-pre-oob.patch
python-aqmp-fix-race-condition-in-legacy.patch
Python-aqmp-fix-type-definitions-for-myp.patch
python-aqmp-handle-asyncio.TimeoutError-.patch
python-aqmp-refactor-_do_accept-into-two.patch
python-aqmp-remove-_new_session-and-_est.patch
python-aqmp-rename-accept-to-start_serve.patch
python-aqmp-rename-AQMPError-to-QMPError.patch
python-aqmp-split-_client_connected_cb-o.patch
python-aqmp-squelch-pylint-warning-for-t.patch
python-aqmp-stop-the-server-during-disco.patch
python-introduce-qmp-shell-wrap-convenie.patch
python-machine-raise-VMLaunchFailure-exc.patch
python-move-qmp-shell-under-the-AQMP-pac.patch
python-move-qmp-utilities-to-python-qemu.patch
python-qmp-switch-qmp-shell-to-AQMP.patch
python-support-recording-QMP-session-to-.patch
python-upgrade-mypy-to-0.780.patch
qcow2-simple-case-support-for-downgradin.patch
qemu-binfmt-conf.sh-should-use-F-as-shor.patch
tests-qemu-iotests-040-Skip-TestCommitWi.patch
tests-qemu-iotests-Fix-051-for-binaries-.patch
tests-qemu-iotests-testrunner-Quote-case.patch
tools-virtiofsd-Add-rseq-syscall-to-the-.patch
ui-cursor-fix-integer-overflow-in-cursor.patch
vhost-vsock-detach-the-virqueue-element-.patch
virtiofsd-Drop-membership-of-all-supplem.patch
virtio-net-fix-map-leaking-on-error-duri.patch
Disable-some-tests-that-have-problems-in.patch
* Patches added:
intc-exynos4210_gic-replace-snprintf-wit.patch
Revert-8dcb404bff6d9147765d7dd3e9c849337.patch
------------------------------------------------------------------
- Fix bsc#1197084
* Patches added:
hostmem-default-the-amount-of-prealloc-t.patch
- Get rid of downstream patches breaking s390 modules. Replace
them with the upstream proposed and Acked (but never committed)
solution (bsc#1199015)
* Patches added:
modules-generates-per-target-modinfo.patch
modules-introduces-module_kconfig-direct.patch
* Patches dropped:
Fix-the-module-building-problem-for-s390.patch
modules-quick-fix-a-fundamental-error-in.patch
- backport patches for having coroutine work well when LTO is used
* Patches added:
coroutine-ucontext-use-QEMU_DEFINE_STATI.patch
coroutine-use-QEMU_DEFINE_STATIC_CO_TLS.patch
coroutine-win32-use-QEMU_DEFINE_STATIC_C.patch
- seabios: drop patch that changes python in python2.
Just go to python3 directly.
* Patches dropped:
seabios-use-python2-explicitly-as-needed.patch
OBS-URL: https://build.opensuse.org/request/show/990667
OBS-URL: https://build.opensuse.org/package/show/Virtualization/qemu?expand=0&rev=726
2726 lines
81 KiB
RPMSpec
2726 lines
81 KiB
RPMSpec
#
|
|
# spec file
|
|
#
|
|
# Copyright (c) 2022 SUSE LLC
|
|
#
|
|
# All modifications and additions to the file contributed by third parties
|
|
# remain the property of their copyright owners, unless otherwise agreed
|
|
# upon. The license for this file, and modifications and additions to the
|
|
# file, is the same license as for the pristine package itself (unless the
|
|
# license for the pristine package is not an Open Source License, in which
|
|
# case the license is the MIT License). An "Open Source License" is a
|
|
# license that conforms to the Open Source Definition (Version 1.9)
|
|
# published by the Open Source Initiative.
|
|
|
|
# Please submit bugfixes or comments via https://bugs.opensuse.org/
|
|
#
|
|
|
|
|
|
%global flavor @BUILD_FLAVOR@%{nil}
|
|
%define name_suffix %{nil}
|
|
|
|
%if "%{flavor}" == "linux-user"
|
|
%define name_suffix -linux-user
|
|
%define summary_string CPU emulator for user space
|
|
%else
|
|
%define summary_string Machine emulator and virtualizer
|
|
%endif
|
|
|
|
%define _buildshell /bin/bash
|
|
|
|
%define srcdir %{_builddir}/%buildsubdir
|
|
%define blddir %srcdir/build
|
|
|
|
%define build_x86_firmware 0
|
|
%define build_ppc_firmware 0
|
|
%define build_opensbi_firmware 0
|
|
%define kvm_available 0
|
|
%define legacy_qemu_kvm 0
|
|
%define force_fit_virtio_pxe_rom 1
|
|
|
|
%if "%{?distribution}" == ""
|
|
%define distro private-build
|
|
%else
|
|
%define distro %{distribution}
|
|
%endif
|
|
|
|
# So, we have openSUSE:Factory, and we have "ports". In openSUSE:Factory, we
|
|
# have i586 and x86_64. In the :ARM port, we have aarch64, armv6l and armv7l.
|
|
# In the :PowerPC port, we have ppc64, ppc and ppc64le. In the :zSystems port
|
|
# we have s390x. And in the :RISCV we have riscv.
|
|
#
|
|
# Ideally, we'd want to build the firmwares at least once per port, and then
|
|
# share the resulting packages among the arch-es within each port (check the
|
|
# `ExportFilter` directives in the project config).
|
|
#
|
|
# Of course, we always build the "native fimrwares" (e.g., x86 firmwares on
|
|
# x86_64, PPC firmwares on ppc64le, etc). But we also cross compile as much
|
|
# firmwares as we can (e.g., both x86 and PPC firmwares on aarch64) so they'll
|
|
# be available in as many ports as possible (as noarch packages).
|
|
|
|
%ifarch x86_64 aarch64
|
|
%define build_ppc_firmware 1
|
|
# Currently, opensbi does not cross build cleanly on 15.3 and 15.4
|
|
%if ! 0%{?sle_version}
|
|
%define build_opensbi_firmware 1
|
|
%endif
|
|
%define build_x86_firmware 1
|
|
%endif
|
|
%ifarch ppc64 ppc64le
|
|
%define build_ppc_firmware 1
|
|
%if ! 0%{?sle_version}
|
|
%define build_opensbi_firmware 1
|
|
%endif
|
|
# FIXME: Try to enable cross building of x86 firmwares here on PPC
|
|
%endif
|
|
%ifarch riscv64
|
|
%define build_opensbi_firmware 1
|
|
%endif
|
|
|
|
%ifarch %ix86 x86_64 ppc ppc64 ppc64le s390x armv7hl aarch64
|
|
%define kvm_available 1
|
|
%define with_uring 1
|
|
%define liburing_min_version 1.0
|
|
%endif
|
|
|
|
%ifarch %ix86 x86_64 s390x
|
|
%define legacy_qemu_kvm 1
|
|
%endif
|
|
|
|
%ifarch x86_64 aarch64 ppc64le s390x
|
|
%define with_rbd 1
|
|
%endif
|
|
|
|
%ifarch x86_64 ppc64le
|
|
%define with_daxctl 1
|
|
%endif
|
|
|
|
# enforce pxe rom sizes for migration compatability from SLE 11 SP3 forward
|
|
# the following need to be > 64K
|
|
%define supported_nics_large {e1000 rtl8139}
|
|
# the following need to be <= 64K
|
|
%define supported_nics_small {virtio}
|
|
# Though not required, make unsupported pxe roms migration compatable as well
|
|
%define unsupported_nics {eepro100 ne2k_pci pcnet}
|
|
|
|
# non-x86 archs still seem to have some issues with Link Time Optimization
|
|
%ifnarch %ix86 x86_64
|
|
%define _lto_cflags %{nil}
|
|
%endif
|
|
|
|
%define generic_qemu_description \
|
|
QEMU provides full machine emulation and cross architecture usage. It closely\
|
|
integrates with KVM and Xen virtualization, allowing for excellent performance.\
|
|
Many options are available for defining the emulated environment, including\
|
|
traditional devices, direct host device access, and interfaces specific to\
|
|
virtualization.
|
|
|
|
%bcond_with system_membarrier
|
|
%bcond_with malloc_trim
|
|
|
|
%define qemuver 7.0.0
|
|
%define srcver 7.0.0
|
|
%define sbver 1.16.0_0_gd239552
|
|
%define srcname qemu
|
|
Name: qemu%{name_suffix}
|
|
URL: https://www.qemu.org/
|
|
Summary: %{summary_string}
|
|
License: BSD-2-Clause AND BSD-3-Clause AND GPL-2.0-only AND GPL-2.0-or-later AND LGPL-2.1-or-later AND MIT
|
|
Group: System/Emulators/PC
|
|
Version: %qemuver
|
|
Release: 0
|
|
Source: https://wiki.qemu.org/download/%{srcname}-%{srcver}.tar.xz
|
|
Source99: https://wiki.qemu.org/download/%{srcname}-%{srcver}.tar.xz.sig
|
|
Source100: %{srcname}.keyring
|
|
Source1: 80-kvm.rules
|
|
Source2: kvm.conf
|
|
Source3: qemu-ifup
|
|
Source4: bridge.conf
|
|
Source5: qemu-kvm.1.gz
|
|
Source6: ksm.service
|
|
Source7: qemu-guest-agent.service
|
|
Source8: 80-qemu-ga.rules
|
|
Source9: qemu-supportconfig
|
|
Source10: supported.arm.txt
|
|
Source11: supported.ppc.txt
|
|
Source12: supported.x86.txt
|
|
Source13: supported.s390.txt
|
|
Source14: 50-seabios-256k.json
|
|
Source15: 60-seabios-128k.json
|
|
Source200: qemu-rpmlintrc
|
|
Source201: pkg-split.txt
|
|
Source202: DSDT.pcie
|
|
Source300: bundles.tar.xz
|
|
Source301: update_git.sh
|
|
Source302: config.sh
|
|
Source303: README.PACKAGING
|
|
# Upstream First -- https://wiki.qemu.org/Contribute/SubmitAPatch
|
|
# This patch queue is auto-generated - see README.PACKAGING for process
|
|
|
|
# Patches applied in base project:
|
|
Patch00000: XXX-dont-dump-core-on-sigabort.patch
|
|
Patch00001: qemu-binfmt-conf-Modify-default-path.patch
|
|
Patch00002: qemu-cvs-gettimeofday.patch
|
|
Patch00003: qemu-cvs-ioctl_debug.patch
|
|
Patch00004: qemu-cvs-ioctl_nodirection.patch
|
|
Patch00005: linux-user-add-binfmt-wrapper-for-argv-0.patch
|
|
Patch00006: PPC-KVM-Disable-mmu-notifier-check.patch
|
|
Patch00007: linux-user-binfmt-support-host-binaries.patch
|
|
Patch00008: linux-user-Fake-proc-cpuinfo.patch
|
|
Patch00009: linux-user-use-target_ulong.patch
|
|
Patch00010: Make-char-muxer-more-robust-wrt-small-FI.patch
|
|
Patch00011: linux-user-lseek-explicitly-cast-non-set.patch
|
|
Patch00012: AIO-Reduce-number-of-threads-for-32bit-h.patch
|
|
Patch00013: xen_disk-Add-suse-specific-flush-disable.patch
|
|
Patch00014: qemu-bridge-helper-reduce-security-profi.patch
|
|
Patch00015: roms-Makefile-pass-a-packaging-timestamp.patch
|
|
Patch00016: Raise-soft-address-space-limit-to-hard-l.patch
|
|
Patch00017: increase-x86_64-physical-bits-to-42.patch
|
|
Patch00018: i8254-Fix-migration-from-SLE11-SP2.patch
|
|
Patch00019: acpi_piix4-Fix-migration-from-SLE11-SP2.patch
|
|
Patch00020: Make-installed-scripts-explicitly-python.patch
|
|
Patch00021: hw-smbios-handle-both-file-formats-regar.patch
|
|
Patch00022: xen-add-block-resize-support-for-xen-dis.patch
|
|
Patch00023: tests-qemu-iotests-Triple-timeout-of-i-o.patch
|
|
Patch00024: tests-Fix-block-tests-to-be-compatible-w.patch
|
|
Patch00025: xen-ignore-live-parameter-from-xen-save-.patch
|
|
Patch00026: tests-change-error-message-in-test-162.patch
|
|
Patch00027: configure-only-populate-roms-if-softmmu.patch
|
|
Patch00028: pc-bios-s390-ccw-net-avoid-warning-about.patch
|
|
Patch00029: roms-change-cross-compiler-naming-to-be-.patch
|
|
Patch00030: test-add-mapping-from-arch-of-i686-to-qe.patch
|
|
Patch00031: configure-remove-pkgversion-from-CONFIG_.patch
|
|
Patch00032: Revert-qht-constify-qht_statistics_init.patch
|
|
Patch00033: qht-Revert-some-constification-in-qht.c.patch
|
|
Patch00034: meson-install-ivshmem-client-and-ivshmem.patch
|
|
Patch00035: Revert-roms-efirom-tests-uefi-test-tools.patch
|
|
Patch00036: Makefile-Don-t-check-pc-bios-as-pre-requ.patch
|
|
Patch00037: roms-Makefile-add-cross-file-to-qboot-me.patch
|
|
Patch00038: usb-Help-compiler-out-to-avoid-a-warning.patch
|
|
Patch00039: qom-handle-case-of-chardev-spice-module-.patch
|
|
Patch00040: scsi-generic-replace-logical-block-count.patch
|
|
Patch00041: hw-scsi-megasas-check-for-NULL-frame-in-.patch
|
|
Patch00042: scsi-generic-check-for-additional-SG_IO-.patch
|
|
Patch00043: doc-add-our-support-doc-to-the-main-proj.patch
|
|
Patch00044: intc-exynos4210_gic-replace-snprintf-wit.patch
|
|
Patch00045: coroutine-ucontext-use-QEMU_DEFINE_STATI.patch
|
|
Patch00046: coroutine-use-QEMU_DEFINE_STATIC_CO_TLS.patch
|
|
Patch00047: coroutine-win32-use-QEMU_DEFINE_STATIC_C.patch
|
|
Patch00048: modules-introduces-module_kconfig-direct.patch
|
|
Patch00049: modules-generates-per-target-modinfo.patch
|
|
Patch00050: sphinx-change-default-language-to-en.patch
|
|
Patch00051: pci-fix-overflow-in-snprintf-string-form.patch
|
|
Patch00052: hw-usb-hcd-ehci-fix-writeback-order.patch
|
|
Patch00053: scsi-lsi53c895a-fix-use-after-free-in-ls.patch
|
|
Patch00054: softmmu-Always-initialize-xlat-in-addres.patch
|
|
Patch00055: hostmem-default-the-amount-of-prealloc-t.patch
|
|
Patch00056: scsi-lsi53c895a-really-fix-use-after-fre.patch
|
|
Patch00057: tests-qtest-Move-the-fuzz-tests-to-x86-o.patch
|
|
Patch00058: Revert-8dcb404bff6d9147765d7dd3e9c849337.patch
|
|
Patch00059: Disable-some-tests-that-have-problems-in.patch
|
|
# Patches applied in roms/seabios/:
|
|
Patch01000: seabios-switch-to-python3-as-needed.patch
|
|
Patch01001: enable-cross-compilation-on-ARM.patch
|
|
Patch01002: build-be-explicit-about-mx86-used-note-n.patch
|
|
# Patches applied in roms/ipxe/:
|
|
Patch02000: ath5k-Add-missing-AR5K_EEPROM_READ-in-at.patch
|
|
Patch02001: stub-out-the-SAN-req-s-in-int13.patch
|
|
Patch02002: ipxe-Makefile-fix-issues-of-build-reprod.patch
|
|
Patch02003: help-compiler-out-by-initializing-array.patch
|
|
Patch02004: Silence-GCC-12-spurious-warnings.patch
|
|
# Patches applied in roms/sgabios/:
|
|
Patch03000: sgabios-Makefile-fix-issues-of-build-rep.patch
|
|
Patch03001: roms-sgabios-Fix-csum8-to-be-built-by-ho.patch
|
|
# Patches applied in roms/edk2/:
|
|
Patch04000: Ignore-spurious-GCC-12-warning.patch
|
|
# Patches applied in roms/skiboot/:
|
|
Patch05000: Makefile-define-endianess-for-cross-buil.patch
|
|
# Patches applied in roms/qboot/:
|
|
Patch11000: qboot-add-cross.ini-file-to-handle-aarch.patch
|
|
# Patches applied in roms/opensbi/:
|
|
Patch13000: Makefile-fix-build-with-binutils-2.38.patch
|
|
|
|
# Please do not add patches manually here.
|
|
|
|
BuildRoot: %{_tmppath}/%{name}-%{version}-build
|
|
|
|
%if "%{name}" == "qemu-linux-user"
|
|
# Build dependencies exclusive to qemu-linux-user
|
|
BuildRequires: glib2-devel-static >= 2.56
|
|
BuildRequires: glibc-devel-static
|
|
BuildRequires: pcre-devel-static
|
|
BuildRequires: zlib-devel-static
|
|
# we must not install the qemu-linux-user package when under QEMU build
|
|
%if 0%{?qemu_user_space_build:1}
|
|
#!BuildIgnore: post-build-checks
|
|
%endif
|
|
# End of build dependencies for qemu-linux-user
|
|
%else
|
|
# Build dependencies exclusive to qemu
|
|
%if %{build_x86_firmware}
|
|
%ifnarch %ix86 x86_64
|
|
# We must cross-compile on non-x86*
|
|
BuildRequires: cross-x86_64-binutils
|
|
BuildRequires: cross-x86_64-gcc%gcc_version
|
|
%endif
|
|
BuildRequires: acpica
|
|
BuildRequires: binutils-devel
|
|
BuildRequires: dos2unix
|
|
BuildRequires: glibc-devel-32bit
|
|
BuildRequires: pkgconfig(liblzma)
|
|
%endif
|
|
%if %{build_opensbi_firmware}
|
|
%ifnarch riscv64
|
|
BuildRequires: cross-riscv64-binutils
|
|
BuildRequires: cross-riscv64-gcc%gcc_version
|
|
%endif
|
|
%endif
|
|
%if %{build_ppc_firmware}
|
|
%ifnarch ppc64 ppc64le
|
|
BuildRequires: cross-ppc64-binutils
|
|
BuildRequires: cross-ppc64-gcc%gcc_version
|
|
%endif
|
|
%endif
|
|
%ifarch x86_64
|
|
BuildRequires: xen-devel >= 4.2
|
|
BuildRequires: pkgconfig(libpmem)
|
|
%endif
|
|
%ifnarch %arm s390x
|
|
BuildRequires: libnuma-devel
|
|
%endif
|
|
%if 0%{?with_daxctl}
|
|
BuildRequires: pkgconfig(libndctl)
|
|
%endif
|
|
%if 0%{?with_rbd}
|
|
BuildRequires: librbd-devel
|
|
%endif
|
|
%if 0%{?with_uring}
|
|
BuildRequires: pkgconfig(liburing) >= %liburing_min_version
|
|
%endif
|
|
%if %{kvm_available}
|
|
BuildRequires: pkgconfig(udev)
|
|
%endif
|
|
BuildRequires: Mesa-devel
|
|
BuildRequires: bison
|
|
BuildRequires: brlapi-devel
|
|
BuildRequires: flex
|
|
BuildRequires: libaio-devel
|
|
BuildRequires: libattr-devel
|
|
BuildRequires: libbz2-devel
|
|
BuildRequires: libfdt-devel >= 1.4.2
|
|
BuildRequires: libgcrypt-devel >= 1.8.0
|
|
BuildRequires: lzfse-devel
|
|
BuildRequires: multipath-tools-devel
|
|
BuildRequires: pkgconfig
|
|
BuildRequires: python3-Sphinx
|
|
BuildRequires: rdma-core-devel
|
|
BuildRequires: snappy-devel
|
|
BuildRequires: update-desktop-files
|
|
BuildRequires: usbredir-devel >= 0.6
|
|
BuildRequires: xfsprogs-devel
|
|
BuildRequires: pkgconfig(alsa)
|
|
BuildRequires: pkgconfig(epoxy)
|
|
BuildRequires: pkgconfig(gbm)
|
|
BuildRequires: pkgconfig(glib-2.0) >= 2.56
|
|
BuildRequires: pkgconfig(glusterfs-api) >= 3
|
|
BuildRequires: pkgconfig(gnutls) >= 3.5.18
|
|
BuildRequires: pkgconfig(gtk+-3.0) >= 3.22
|
|
BuildRequires: pkgconfig(jack)
|
|
BuildRequires: pkgconfig(libcacard) >= 2.5.1
|
|
BuildRequires: pkgconfig(libcap-ng)
|
|
BuildRequires: pkgconfig(libcurl) >= 7.29
|
|
BuildRequires: pkgconfig(libdrm)
|
|
BuildRequires: pkgconfig(libiscsi) >= 1.9.0
|
|
BuildRequires: pkgconfig(libjpeg)
|
|
BuildRequires: pkgconfig(libnfs) >= 1.9.3
|
|
BuildRequires: pkgconfig(libpng)
|
|
BuildRequires: pkgconfig(libpulse)
|
|
BuildRequires: pkgconfig(libsasl2)
|
|
BuildRequires: pkgconfig(libseccomp) >= 2.3.0
|
|
BuildRequires: pkgconfig(libssh) >= 0.8.7
|
|
BuildRequires: pkgconfig(libudev)
|
|
BuildRequires: pkgconfig(libusb-1.0) >= 1.0.13
|
|
BuildRequires: pkgconfig(libzstd)
|
|
BuildRequires: pkgconfig(lzo2)
|
|
BuildRequires: pkgconfig(ncurses)
|
|
BuildRequires: pkgconfig(pixman-1) >= 0.21.8
|
|
BuildRequires: pkgconfig(slirp) >= 4.2.0
|
|
BuildRequires: pkgconfig(spice-protocol) >= 0.12.3
|
|
BuildRequires: pkgconfig(spice-server) >= 0.12.5
|
|
BuildRequires: pkgconfig(systemd)
|
|
BuildRequires: pkgconfig(vdeplug)
|
|
BuildRequires: pkgconfig(virglrenderer) >= 0.4.1
|
|
BuildRequires: pkgconfig(vte-2.91)
|
|
BuildRequires: pkgconfig(xkbcommon)
|
|
BuildRequires: pkgconfig(zlib)
|
|
%{?systemd_ordering}
|
|
# End of build dependencies for qemu
|
|
%endif
|
|
# Common build dependencies between qemu and qemu-linux-user
|
|
BuildRequires: fdupes
|
|
BuildRequires: gcc-c++
|
|
BuildRequires: meson
|
|
BuildRequires: ninja >= 1.7
|
|
BuildRequires: python3-base >= 3.6
|
|
BuildRequires: python3-setuptools
|
|
%if "%{name}" == "qemu"
|
|
# Requires, Recommends, etc exclusive to qemu
|
|
%if %{kvm_available}
|
|
%ifarch %ix86 x86_64
|
|
Requires: qemu-x86
|
|
%else
|
|
Suggests: qemu-x86
|
|
%endif
|
|
%ifarch ppc ppc64 ppc64le
|
|
Requires: qemu-ppc
|
|
%else
|
|
Suggests: qemu-ppc
|
|
%endif
|
|
%ifarch s390x
|
|
Requires: qemu-s390x
|
|
Requires(post): procps
|
|
%else
|
|
Suggests: qemu-s390x
|
|
%endif
|
|
%ifarch %arm aarch64
|
|
Requires: qemu-arm
|
|
%else
|
|
Suggests: qemu-arm
|
|
%endif
|
|
Requires(post): acl
|
|
Requires(post): udev
|
|
Recommends: kvm_stat
|
|
# End of "if kvm_available"
|
|
%endif
|
|
Requires: group(kvm)
|
|
Requires: group(qemu)
|
|
Requires: user(qemu)
|
|
Requires(post): coreutils
|
|
%ifarch s390x
|
|
Recommends: qemu-hw-s390x-virtio-gpu-ccw
|
|
%else
|
|
Recommends: qemu-hw-display-qxl
|
|
Recommends: qemu-hw-display-virtio-gpu
|
|
Recommends: qemu-hw-display-virtio-gpu-pci
|
|
Recommends: qemu-hw-display-virtio-vga
|
|
Recommends: qemu-hw-usb-host
|
|
Recommends: qemu-hw-usb-redirect
|
|
Recommends: qemu-hw-usb-smartcard
|
|
Recommends: qemu-ui-gtk
|
|
Recommends: qemu-ui-spice-app
|
|
# End of "ifarch s390x"
|
|
%endif
|
|
Recommends: qemu-block-curl
|
|
Recommends: qemu-ksm = %{qemuver}
|
|
Recommends: qemu-tools
|
|
Recommends: qemu-ui-curses
|
|
%if 0%{?with_rbd}
|
|
Suggests: qemu-block-rbd
|
|
%endif
|
|
Suggests: qemu-accel-qtest
|
|
Suggests: qemu-block-dmg
|
|
Suggests: qemu-block-gluster
|
|
Suggests: qemu-block-iscsi
|
|
Suggests: qemu-block-nfs
|
|
Suggests: qemu-block-ssh
|
|
Suggests: qemu-chardev-baum
|
|
Suggests: qemu-extra
|
|
Suggests: qemu-lang
|
|
Suggests: qemu-microvm
|
|
Suggests: qemu-skiboot
|
|
Suggests: qemu-vhost-user-gpu
|
|
Obsoletes: qemu-audio-oss < %{qemuver}
|
|
Obsoletes: qemu-audio-sdl < %{qemuver}
|
|
Obsoletes: qemu-ui-sdl < %{qemuver}
|
|
# End of Requires, Recommends, etc for qemu.
|
|
# There isn't any for qemu-linux-user.
|
|
%endif
|
|
|
|
%if "%{name}" == "qemu-linux-user"
|
|
# Description and files for the qemu-linux-user package
|
|
|
|
%description
|
|
QEMU provides CPU emulation along with other related capabilities. This package
|
|
provides programs to run user space binaries and libraries meant for another
|
|
architecture. The syscall interface is intercepted and execution below the
|
|
syscall layer occurs on the native hardware and operating system.
|
|
|
|
%files
|
|
%defattr(-, root, root)
|
|
%doc README.rst VERSION
|
|
%license COPYING COPYING.LIB LICENSE
|
|
%_bindir/qemu-aarch64
|
|
%_bindir/qemu-aarch64_be
|
|
%_bindir/qemu-alpha
|
|
%_bindir/qemu-arm
|
|
%_bindir/qemu-armeb
|
|
%_bindir/qemu-cris
|
|
%_bindir/qemu-hexagon
|
|
%_bindir/qemu-hppa
|
|
%_bindir/qemu-i386
|
|
%_bindir/qemu-m68k
|
|
%_bindir/qemu-microblaze
|
|
%_bindir/qemu-microblazeel
|
|
%_bindir/qemu-mips
|
|
%_bindir/qemu-mips64
|
|
%_bindir/qemu-mips64el
|
|
%_bindir/qemu-mipsel
|
|
%_bindir/qemu-mipsn32
|
|
%_bindir/qemu-mipsn32el
|
|
%_bindir/qemu-nios2
|
|
%_bindir/qemu-or1k
|
|
%_bindir/qemu-ppc
|
|
%_bindir/qemu-ppc64
|
|
%_bindir/qemu-ppc64le
|
|
%_bindir/qemu-riscv32
|
|
%_bindir/qemu-riscv64
|
|
%_bindir/qemu-s390x
|
|
%_bindir/qemu-sh4
|
|
%_bindir/qemu-sh4eb
|
|
%_bindir/qemu-sparc
|
|
%_bindir/qemu-sparc32plus
|
|
%_bindir/qemu-sparc64
|
|
%_bindir/qemu-x86_64
|
|
%_bindir/qemu-xtensa
|
|
%_bindir/qemu-xtensaeb
|
|
%_bindir/qemu-binfmt
|
|
%_bindir/qemu-*-binfmt
|
|
%_sbindir/qemu-binfmt-conf.sh
|
|
|
|
# End of description and files for qemu-linux-user
|
|
%else
|
|
# Description and files for qemu and all its subpackages
|
|
|
|
%description
|
|
%{generic_qemu_description}
|
|
|
|
This package acts as an umbrella package to the other QEMU sub-packages.
|
|
|
|
%files
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/icons/hicolor
|
|
%dir %_datadir/icons/hicolor/*/
|
|
%dir %_datadir/icons/hicolor/*/apps
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/firmware
|
|
%dir %_datadir/%name/forsplits
|
|
%dir %_docdir/%name/about
|
|
%dir %_docdir/%name/devel
|
|
%dir %_docdir/%name/interop
|
|
%dir %_docdir/%name/specs
|
|
%dir %_docdir/%name/system
|
|
%dir %_docdir/%name/system/arm
|
|
%dir %_docdir/%name/system/devices
|
|
%dir %_docdir/%name/system/i386
|
|
%dir %_docdir/%name/system/ppc
|
|
%dir %_docdir/%name/system/riscv
|
|
%dir %_docdir/%name/system/s390x
|
|
%dir %_docdir/%name/tools
|
|
%dir %_docdir/%name/user
|
|
%dir %_datadir/%name/vhost-user
|
|
%dir %_sysconfdir/%name
|
|
%dir %_sysconfdir/%name/firmware
|
|
%dir /usr/lib/supportconfig
|
|
%dir /usr/lib/supportconfig/plugins
|
|
%if %{kvm_available}
|
|
%ifarch s390x
|
|
%{_prefix}/lib/modules-load.d/kvm.conf
|
|
%endif
|
|
/usr/lib/udev/rules.d/80-kvm.rules
|
|
%endif
|
|
%if %{legacy_qemu_kvm}
|
|
%_docdir/%name/supported.html
|
|
%endif
|
|
%_datadir/applications/qemu.desktop
|
|
%_datadir/icons/hicolor/16x16/apps/qemu.png
|
|
%_datadir/icons/hicolor/24x24/apps/qemu.png
|
|
%_datadir/icons/hicolor/32x32/apps/qemu.bmp
|
|
%_datadir/icons/hicolor/32x32/apps/qemu.png
|
|
%_datadir/icons/hicolor/48x48/apps/qemu.png
|
|
%_datadir/icons/hicolor/64x64/apps/qemu.png
|
|
%_datadir/icons/hicolor/128x128/apps/qemu.png
|
|
%_datadir/icons/hicolor/256x256/apps/qemu.png
|
|
%_datadir/icons/hicolor/512x512/apps/qemu.png
|
|
%_datadir/icons/hicolor/scalable/apps/qemu.svg
|
|
%_datadir/%name/forsplits/17
|
|
%_datadir/%name/forsplits/18
|
|
%_datadir/%name/forsplits/19
|
|
%_datadir/%name/forsplits/pkg-split.txt
|
|
%_datadir/%name/keymaps
|
|
%_datadir/%name/qemu-ifup
|
|
%_datadir/%name/qemu-nsis.bmp
|
|
%_datadir/%name/trace-events-all
|
|
%_datadir/%name/vhost-user/50-qemu-virtiofsd.json
|
|
%_docdir/%name/.buildinfo
|
|
%_docdir/%name/about/build-platforms.html
|
|
%_docdir/%name/about/deprecated.html
|
|
%_docdir/%name/about/index.html
|
|
%_docdir/%name/about/license.html
|
|
%_docdir/%name/about/removed-features.html
|
|
%_docdir/%name/dbus-dbusindex.html
|
|
%_docdir/%name/devel/atomics.html
|
|
%_docdir/%name/devel/bitops.html
|
|
%_docdir/%name/devel/block-coroutine-wrapper.html
|
|
%_docdir/%name/devel/build-system.html
|
|
%_docdir/%name/devel/ci.html
|
|
%_docdir/%name/devel/clocks.html
|
|
%_docdir/%name/devel/code-of-conduct.html
|
|
%_docdir/%name/devel/conflict-resolution.html
|
|
%_docdir/%name/devel/control-flow-integrity.html
|
|
%_docdir/%name/devel/decodetree.html
|
|
%_docdir/%name/devel/ebpf_rss.html
|
|
%_docdir/%name/devel/fuzzing.html
|
|
%_docdir/%name/devel/index-api.html
|
|
%_docdir/%name/devel/index-build.html
|
|
%_docdir/%name/devel/index-internals.html
|
|
%_docdir/%name/devel/index-process.html
|
|
%_docdir/%name/devel/index-tcg.html
|
|
%_docdir/%name/devel/index.html
|
|
%_docdir/%name/devel/kconfig.html
|
|
%_docdir/%name/devel/loads-stores.html
|
|
%_docdir/%name/devel/memory.html
|
|
%_docdir/%name/devel/migration.html
|
|
%_docdir/%name/devel/modules.html
|
|
%_docdir/%name/devel/multi-process.html
|
|
%_docdir/%name/devel/multi-thread-tcg.html
|
|
%_docdir/%name/devel/qapi-code-gen.html
|
|
%_docdir/%name/devel/qgraph.html
|
|
%_docdir/%name/devel/qom.html
|
|
%_docdir/%name/devel/qtest.html
|
|
%_docdir/%name/devel/reset.html
|
|
%_docdir/%name/devel/s390-dasd-ipl.html
|
|
%_docdir/%name/devel/secure-coding-practices.html
|
|
%_docdir/%name/devel/stable-process.html
|
|
%_docdir/%name/devel/style.html
|
|
%_docdir/%name/devel/submitting-a-patch.html
|
|
%_docdir/%name/devel/submitting-a-pull-request.html
|
|
%_docdir/%name/devel/tcg-icount.html
|
|
%_docdir/%name/devel/tcg-plugins.html
|
|
%_docdir/%name/devel/tcg.html
|
|
%_docdir/%name/devel/testing.html
|
|
%_docdir/%name/devel/tracing.html
|
|
%_docdir/%name/devel/trivial-patches.html
|
|
%_docdir/%name/devel/ui.html
|
|
%_docdir/%name/devel/vfio-migration.html
|
|
%_docdir/%name/devel/writing-monitor-commands.html
|
|
%_docdir/%name/genindex.html
|
|
%_docdir/%name/index.html
|
|
%_docdir/%name/interop/barrier.html
|
|
%_docdir/%name/interop/bitmaps.html
|
|
%_docdir/%name/interop/dbus-display.html
|
|
%_docdir/%name/interop/dbus-vmstate.html
|
|
%_docdir/%name/interop/dbus.html
|
|
%_docdir/%name/interop/index.html
|
|
%_docdir/%name/interop/live-block-operations.html
|
|
%_docdir/%name/interop/pr-helper.html
|
|
%_docdir/%name/interop/qemu-ga-ref.html
|
|
%_docdir/%name/interop/qemu-qmp-ref.html
|
|
%_docdir/%name/interop/qemu-storage-daemon-qmp-ref.html
|
|
%_docdir/%name/interop/vhost-user-gpu.html
|
|
%_docdir/%name/interop/vhost-user.html
|
|
%_docdir/%name/interop/vhost-vdpa.html
|
|
%_docdir/%name/interop/virtio-balloon-stats.html
|
|
%_docdir/%name/objects.inv
|
|
%_docdir/%name/search.html
|
|
%_docdir/%name/searchindex.js
|
|
%_docdir/%name/specs/acpi_cpu_hotplug.html
|
|
%_docdir/%name/specs/acpi_erst.html
|
|
%_docdir/%name/specs/acpi_hest_ghes.html
|
|
%_docdir/%name/specs/acpi_hw_reduced_hotplug.html
|
|
%_docdir/%name/specs/acpi_mem_hotplug.html
|
|
%_docdir/%name/specs/acpi_nvdimm.html
|
|
%_docdir/%name/specs/acpi_pci_hotplug.html
|
|
%_docdir/%name/specs/index.html
|
|
%_docdir/%name/specs/ppc-spapr-hcalls.html
|
|
%_docdir/%name/specs/ppc-spapr-hotplug.html
|
|
%_docdir/%name/specs/ppc-spapr-numa.html
|
|
%_docdir/%name/specs/ppc-spapr-uv-hcalls.html
|
|
%_docdir/%name/specs/ppc-spapr-xive.html
|
|
%_docdir/%name/specs/ppc-xive.html
|
|
%_docdir/%name/specs/sev-guest-firmware.html
|
|
%_docdir/%name/specs/tpm.html
|
|
%_docdir/%name/system/arm/aspeed.html
|
|
%_docdir/%name/system/arm/collie.html
|
|
%_docdir/%name/system/arm/cpu-features.html
|
|
%_docdir/%name/system/arm/cubieboard.html
|
|
%_docdir/%name/system/arm/digic.html
|
|
%_docdir/%name/system/arm/emcraft-sf2.html
|
|
%_docdir/%name/system/arm/emulation.html
|
|
%_docdir/%name/system/arm/gumstix.html
|
|
%_docdir/%name/system/arm/highbank.html
|
|
%_docdir/%name/system/arm/imx25-pdk.html
|
|
%_docdir/%name/system/arm/integratorcp.html
|
|
%_docdir/%name/system/arm/kzm.html
|
|
%_docdir/%name/system/arm/mainstone.html
|
|
%_docdir/%name/system/arm/mps2.html
|
|
%_docdir/%name/system/arm/musca.html
|
|
%_docdir/%name/system/arm/musicpal.html
|
|
%_docdir/%name/system/arm/nrf.html
|
|
%_docdir/%name/system/arm/nseries.html
|
|
%_docdir/%name/system/arm/nuvoton.html
|
|
%_docdir/%name/system/arm/orangepi.html
|
|
%_docdir/%name/system/arm/palm.html
|
|
%_docdir/%name/system/arm/raspi.html
|
|
%_docdir/%name/system/arm/realview.html
|
|
%_docdir/%name/system/arm/sabrelite.html
|
|
%_docdir/%name/system/arm/sbsa.html
|
|
%_docdir/%name/system/arm/stellaris.html
|
|
%_docdir/%name/system/arm/stm32.html
|
|
%_docdir/%name/system/arm/sx1.html
|
|
%_docdir/%name/system/arm/versatile.html
|
|
%_docdir/%name/system/arm/vexpress.html
|
|
%_docdir/%name/system/arm/virt.html
|
|
%_docdir/%name/system/arm/xlnx-versal-virt.html
|
|
%_docdir/%name/system/arm/xscale.html
|
|
%_docdir/%name/system/authz.html
|
|
%_docdir/%name/system/barrier.html
|
|
%_docdir/%name/system/bootindex.html
|
|
%_docdir/%name/system/confidential-guest-support.html
|
|
%_docdir/%name/system/cpu-hotplug.html
|
|
%_docdir/%name/system/device-emulation.html
|
|
%_docdir/%name/system/devices/can.html
|
|
%_docdir/%name/system/devices/ivshmem.html
|
|
%_docdir/%name/system/devices/net.html
|
|
%_docdir/%name/system/devices/nvme.html
|
|
%_docdir/%name/system/devices/usb.html
|
|
%_docdir/%name/system/devices/vhost-user-rng.html
|
|
%_docdir/%name/system/devices/vhost-user.html
|
|
%_docdir/%name/system/devices/virtio-pmem.html
|
|
%_docdir/%name/system/gdb.html
|
|
%_docdir/%name/system/generic-loader.html
|
|
%_docdir/%name/system/guest-loader.html
|
|
%_docdir/%name/system/i386/amd-memory-encryption.html
|
|
%_docdir/%name/system/i386/cpu.html
|
|
%_docdir/%name/system/i386/kvm-pv.html
|
|
%_docdir/%name/system/i386/microvm.html
|
|
%_docdir/%name/system/i386/pc.html
|
|
%_docdir/%name/system/i386/sgx.html
|
|
%_docdir/%name/system/images.html
|
|
%_docdir/%name/system/index.html
|
|
%_docdir/%name/system/invocation.html
|
|
%_docdir/%name/system/keys.html
|
|
%_docdir/%name/system/linuxboot.html
|
|
%_docdir/%name/system/managed-startup.html
|
|
%_docdir/%name/system/monitor.html
|
|
%_docdir/%name/system/multi-process.html
|
|
%_docdir/%name/system/mux-chardev.html
|
|
%_docdir/%name/system/ppc/embedded.html
|
|
%_docdir/%name/system/ppc/powermac.html
|
|
%_docdir/%name/system/ppc/powernv.html
|
|
%_docdir/%name/system/ppc/ppce500.html
|
|
%_docdir/%name/system/ppc/prep.html
|
|
%_docdir/%name/system/ppc/pseries.html
|
|
%_docdir/%name/system/pr-manager.html
|
|
%_docdir/%name/system/qemu-block-drivers.html
|
|
%_docdir/%name/system/qemu-cpu-models.html
|
|
%_docdir/%name/system/qemu-manpage.html
|
|
%_docdir/%name/system/quickstart.html
|
|
%_docdir/%name/system/riscv/microchip-icicle-kit.html
|
|
%_docdir/%name/system/riscv/shakti-c.html
|
|
%_docdir/%name/system/riscv/sifive_u.html
|
|
%_docdir/%name/system/riscv/virt.html
|
|
%_docdir/%name/system/s390x/3270.html
|
|
%_docdir/%name/system/s390x/bootdevices.html
|
|
%_docdir/%name/system/s390x/css.html
|
|
%_docdir/%name/system/s390x/protvirt.html
|
|
%_docdir/%name/system/s390x/vfio-ap.html
|
|
%_docdir/%name/system/s390x/vfio-ccw.html
|
|
%_docdir/%name/system/secrets.html
|
|
%_docdir/%name/system/security.html
|
|
%_docdir/%name/system/target-arm.html
|
|
%_docdir/%name/system/target-avr.html
|
|
%_docdir/%name/system/target-i386.html
|
|
%_docdir/%name/system/target-m68k.html
|
|
%_docdir/%name/system/target-mips.html
|
|
%_docdir/%name/system/target-ppc.html
|
|
%_docdir/%name/system/target-riscv.html
|
|
%_docdir/%name/system/target-rx.html
|
|
%_docdir/%name/system/target-s390x.html
|
|
%_docdir/%name/system/target-sparc.html
|
|
%_docdir/%name/system/target-sparc64.html
|
|
%_docdir/%name/system/target-xtensa.html
|
|
%_docdir/%name/system/targets.html
|
|
%_docdir/%name/system/tls.html
|
|
%_docdir/%name/system/virtio-net-failover.html
|
|
%_docdir/%name/system/vnc-security.html
|
|
%_docdir/%name/tools/index.html
|
|
%_docdir/%name/tools/qemu-img.html
|
|
%_docdir/%name/tools/qemu-nbd.html
|
|
%_docdir/%name/tools/qemu-pr-helper.html
|
|
%_docdir/%name/tools/qemu-storage-daemon.html
|
|
%_docdir/%name/tools/qemu-trace-stap.html
|
|
%_docdir/%name/tools/virtfs-proxy-helper.html
|
|
%_docdir/%name/tools/virtiofsd.html
|
|
%_docdir/%name/user/index.html
|
|
%_docdir/%name/user/main.html
|
|
%_mandir/man1/%name.1.gz
|
|
%_mandir/man1/qemu-storage-daemon.1.gz
|
|
%_mandir/man1/virtiofsd.1.gz
|
|
%_mandir/man7/qemu-block-drivers.7.gz
|
|
%_mandir/man7/qemu-cpu-models.7.gz
|
|
%_mandir/man7/qemu-qmp-ref.7.gz
|
|
%_mandir/man7/qemu-ga-ref.7.gz
|
|
%_mandir/man7/qemu-storage-daemon-qmp-ref.7.gz
|
|
/usr/lib/supportconfig/plugins/%name
|
|
%doc %_docdir/%name/_static
|
|
%doc README.rst VERSION
|
|
%license COPYING COPYING.LIB LICENSE
|
|
|
|
%if %{kvm_available}
|
|
%post
|
|
# Do not execute operations affecting host devices while running in a chroot
|
|
if [ $(stat -L -c "%i" /proc/1/root/) = $(stat -L -c "%i" /) ]; then
|
|
setfacl --remove-all /dev/kvm &> /dev/null || :
|
|
%ifarch s390x
|
|
if [ -c /dev/kvm ]; then
|
|
%_bindir/chmod 0666 /dev/kvm
|
|
%_bindir/chgrp kvm /dev/kvm
|
|
fi
|
|
%endif
|
|
%udev_rules_update
|
|
%_bindir/udevadm trigger -y kvm || :
|
|
%ifarch s390x
|
|
sysctl vm.allocate_pgste=1 || :
|
|
%endif
|
|
fi
|
|
# End of "if {kvm_available}"
|
|
%endif
|
|
|
|
# Modules need to match {qemu-system-*,qemu-img} version.
|
|
# We cannot have qemu and qemu-tools require them in the right version,
|
|
# as that would drag in the dependencies the modules are supposed to avoid.
|
|
# Nor can we have modules require the right version of qemu and qemu-tools
|
|
# as Xen reuses our qemu-tools but does not want our qemu and qemu-x86.
|
|
%define qemu_module_conflicts \
|
|
Conflicts: %name < %{qemuver}-%{release} \
|
|
Conflicts: %name > %{qemuver}-%{release} \
|
|
Conflicts: qemu-tools < %{qemuver}-%{release} \
|
|
Conflicts: qemu-tools > %{qemuver}-%{release}
|
|
|
|
%package x86
|
|
Summary: Machine emulator and virtualizer for x86 architectures
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Requires: %name = %{qemuver}
|
|
Requires: qemu-accel-tcg-x86
|
|
Requires: qemu-ipxe
|
|
Requires: qemu-seabios
|
|
Requires: qemu-sgabios
|
|
Requires: qemu-vgabios
|
|
Recommends: ovmf
|
|
Recommends: qemu-microvm
|
|
Recommends: qemu-ovmf-x86_64
|
|
|
|
%description x86
|
|
%{generic_qemu_description}
|
|
|
|
This package provides i386 and x86_64 emulation.
|
|
|
|
%files x86
|
|
%defattr(-, root, root)
|
|
%_bindir/qemu-system-i386
|
|
%_bindir/qemu-system-x86_64
|
|
%_datadir/%name/kvmvapic.bin
|
|
%_datadir/%name/linuxboot.bin
|
|
%_datadir/%name/linuxboot_dma.bin
|
|
%_datadir/%name/multiboot.bin
|
|
%_datadir/%name/multiboot_dma.bin
|
|
%_datadir/%name/pvh.bin
|
|
%dir %_docdir/qemu-x86
|
|
%_docdir/qemu-x86/supported.txt
|
|
|
|
%package ppc
|
|
Summary: Machine emulator and virtualizer for Power architectures
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Requires: %name = %{qemuver}
|
|
Requires: qemu-SLOF
|
|
Recommends: qemu-ipxe
|
|
Recommends: qemu-vgabios
|
|
|
|
%description ppc
|
|
%{generic_qemu_description}
|
|
|
|
This package provides ppc and ppc64 emulation.
|
|
|
|
%files ppc
|
|
%defattr(-, root, root)
|
|
%_bindir/qemu-system-ppc
|
|
%_bindir/qemu-system-ppc64
|
|
%_datadir/%name/bamboo.dtb
|
|
%_datadir/%name/canyonlands.dtb
|
|
%_datadir/%name/openbios-ppc
|
|
%_datadir/%name/qemu_vga.ndrv
|
|
%_datadir/%name/u-boot.e500
|
|
%_datadir/%name/u-boot-sam460-20100605.bin
|
|
%_datadir/%name/vof*.bin
|
|
%dir %_docdir/qemu-ppc
|
|
%_docdir/qemu-ppc/supported.txt
|
|
|
|
%package s390x
|
|
Summary: Machine emulator and virtualizer for S/390 architectures
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Requires: %name = %{qemuver}
|
|
Provides: qemu-s390 = %{qemuver}
|
|
Obsoletes: qemu-s390 < %{qemuver}
|
|
|
|
%description s390x
|
|
%{generic_qemu_description}
|
|
|
|
This package provides s390x emulation.
|
|
|
|
%files s390x
|
|
%defattr(-, root, root)
|
|
%_bindir/qemu-system-s390x
|
|
%_datadir/%name/s390-ccw.img
|
|
%_datadir/%name/s390-netboot.img
|
|
%dir %_docdir/qemu-s390x
|
|
%_docdir/qemu-s390x/supported.txt
|
|
|
|
%package arm
|
|
Summary: Machine emulator and virtualizer for ARM architectures
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Requires: %name = %{qemuver}
|
|
Recommends: ovmf
|
|
Recommends: qemu-ipxe
|
|
Recommends: qemu-uefi-aarch64
|
|
Recommends: qemu-vgabios
|
|
|
|
%description arm
|
|
%{generic_qemu_description}
|
|
|
|
This package provides arm emulation.
|
|
|
|
%files arm
|
|
%defattr(-, root, root)
|
|
%_bindir/qemu-system-arm
|
|
%_bindir/qemu-system-aarch64
|
|
%_datadir/%name/npcm7xx_bootrom.bin
|
|
%dir %_docdir/qemu-arm
|
|
%_docdir/qemu-arm/supported.txt
|
|
|
|
%package extra
|
|
Summary: Machine emulator and virtualizer for "extra" architectures
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Requires: %name = %{qemuver}
|
|
Recommends: qemu-ipxe
|
|
Recommends: qemu-skiboot
|
|
Recommends: qemu-vgabios
|
|
|
|
%description extra
|
|
%{generic_qemu_description}
|
|
|
|
This package provides some lesser used emulations, including alpha, m68k,
|
|
mips, sparc, and xtensa. (The term "extra" is juxtapositioned against more
|
|
popular QEMU packages which are dedicated to a single architecture.)
|
|
|
|
%files extra
|
|
%defattr(-, root, root)
|
|
%_bindir/qemu-system-alpha
|
|
%_bindir/qemu-system-avr
|
|
%_bindir/qemu-system-cris
|
|
%_bindir/qemu-system-hppa
|
|
%_bindir/qemu-system-m68k
|
|
%_bindir/qemu-system-microblaze
|
|
%_bindir/qemu-system-microblazeel
|
|
%_bindir/qemu-system-mips
|
|
%_bindir/qemu-system-mipsel
|
|
%_bindir/qemu-system-mips64
|
|
%_bindir/qemu-system-mips64el
|
|
%_bindir/qemu-system-nios2
|
|
%_bindir/qemu-system-or1k
|
|
%_bindir/qemu-system-riscv32
|
|
%_bindir/qemu-system-riscv64
|
|
%_bindir/qemu-system-rx
|
|
%_bindir/qemu-system-sh4
|
|
%_bindir/qemu-system-sh4eb
|
|
%_bindir/qemu-system-sparc
|
|
%_bindir/qemu-system-sparc64
|
|
%_bindir/qemu-system-tricore
|
|
%_bindir/qemu-system-xtensa
|
|
%_bindir/qemu-system-xtensaeb
|
|
%_datadir/%name/hppa-firmware.img
|
|
%_datadir/%name/openbios-sparc32
|
|
%_datadir/%name/openbios-sparc64
|
|
%_datadir/%name/opensbi-riscv32-generic-fw_dynamic.bin
|
|
%_datadir/%name/opensbi-riscv64-generic-fw_dynamic.bin
|
|
%_datadir/%name/palcode-clipper
|
|
%_datadir/%name/petalogix-ml605.dtb
|
|
%_datadir/%name/petalogix-s3adsp1800.dtb
|
|
%_datadir/%name/QEMU,cgthree.bin
|
|
%_datadir/%name/QEMU,tcx.bin
|
|
|
|
%package lang
|
|
Summary: Translations for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
|
|
%description lang
|
|
This package contains a few language translations, particularly for the
|
|
graphical user interface components that come with QEMU. The bulk of strings
|
|
in QEMU are not localized.
|
|
|
|
%files lang -f %blddir/%name.lang
|
|
%defattr(-, root, root)
|
|
|
|
%package audio-alsa
|
|
Summary: ALSA based audio support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
%{qemu_module_conflicts}
|
|
|
|
%description audio-alsa
|
|
This package contains a module for ALSA based audio support for QEMU.
|
|
|
|
%files audio-alsa
|
|
%defattr(-, root, root)
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/audio-alsa.so
|
|
|
|
%package audio-dbus
|
|
Summary: D-Bus based audio support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
%{qemu_module_conflicts}
|
|
|
|
%description audio-dbus
|
|
This package provides a module for D-Bus based audio support for QEMU.
|
|
|
|
%files audio-dbus
|
|
%defattr(-, root, root)
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/audio-dbus.so
|
|
|
|
%package audio-pa
|
|
Summary: Pulse Audio based audio support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
%{qemu_module_conflicts}
|
|
|
|
%description audio-pa
|
|
This package contains a module for Pulse Audio based audio support for QEMU.
|
|
|
|
%files audio-pa
|
|
%defattr(-, root, root)
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/audio-pa.so
|
|
|
|
%package audio-jack
|
|
Summary: JACK based audio support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
%{qemu_module_conflicts}
|
|
|
|
%description audio-jack
|
|
This package contains a module for JACK based audio support for QEMU.
|
|
|
|
%files audio-jack
|
|
%defattr(-, root, root)
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/audio-jack.so
|
|
|
|
%package audio-spice
|
|
Summary: Spice based audio support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Provides: %name:%_datadir/%name/forsplits/05
|
|
Requires: qemu-ui-spice-core
|
|
%{qemu_module_conflicts}
|
|
|
|
%description audio-spice
|
|
This package contains a module for Spice based audio support for QEMU.
|
|
|
|
%files audio-spice
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/05
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/audio-spice.so
|
|
|
|
%package audio-oss
|
|
Summary: OSS based audio support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
%{qemu_module_conflicts}
|
|
|
|
%description audio-oss
|
|
This package contains a module for OSS based audio support for QEMU.
|
|
|
|
%files audio-oss
|
|
%defattr(-, root, root)
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/audio-oss.so
|
|
|
|
%package block-curl
|
|
Summary: cURL block support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
%{qemu_module_conflicts}
|
|
|
|
%description block-curl
|
|
This package contains a module for accessing network-based image files over
|
|
a network connection from qemu-img tool and QEMU system emulation.
|
|
|
|
%files block-curl
|
|
%defattr(-, root, root)
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/block-curl.so
|
|
|
|
%package block-dmg
|
|
Summary: DMG block support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
%{qemu_module_conflicts}
|
|
|
|
%description block-dmg
|
|
This package contains a module for accessing Mac OS X image files from
|
|
qemu-img tool and QEMU system emulation.
|
|
|
|
%files block-dmg
|
|
%defattr(-, root, root)
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/block-dmg-bz2.so
|
|
%_libdir/%name/block-dmg-lzfse.so
|
|
|
|
%package block-gluster
|
|
Summary: GlusterFS block support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
%{qemu_module_conflicts}
|
|
|
|
%description block-gluster
|
|
This package contains a module for accessing network-based image files over a
|
|
GlusterFS network connection from qemu-img tool and QEMU system emulation.
|
|
|
|
%files block-gluster
|
|
%defattr(-, root, root)
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/block-gluster.so
|
|
|
|
%package block-iscsi
|
|
Summary: iSCSI block support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
%{qemu_module_conflicts}
|
|
|
|
%description block-iscsi
|
|
This package contains a module for accessing network-based image files over an
|
|
iSCSI network connection from qemu-img tool and QEMU system emulation.
|
|
|
|
%files block-iscsi
|
|
%defattr(-, root, root)
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/block-iscsi.so
|
|
|
|
%package block-nfs
|
|
Summary: direct Network File System support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
%{qemu_module_conflicts}
|
|
|
|
%description block-nfs
|
|
This package contains a module for directly accessing nfs based image files
|
|
for QEMU.
|
|
|
|
%files block-nfs
|
|
%defattr(-, root, root)
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/block-nfs.so
|
|
|
|
%package block-ssh
|
|
Summary: SSH (SFTP) block support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
%{qemu_module_conflicts}
|
|
|
|
%description block-ssh
|
|
This package contains a module for accessing network-based image files over an
|
|
SSH network connection from qemu-img tool and QEMU system emulation.
|
|
|
|
%files block-ssh
|
|
%defattr(-, root, root)
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/block-ssh.so
|
|
|
|
%package chardev-baum
|
|
Summary: Baum braille chardev support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Provides: %name:%_datadir/%name/forsplits/00
|
|
%{qemu_module_conflicts}
|
|
|
|
%description chardev-baum
|
|
This package contains a module for baum braille chardev support for QEMU.
|
|
|
|
%files chardev-baum
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/00
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/chardev-baum.so
|
|
|
|
%package chardev-spice
|
|
Summary: Spice vmc and port chardev support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Provides: %name:%_datadir/%name/forsplits/08
|
|
Requires: qemu-ui-spice-core
|
|
%{qemu_module_conflicts}
|
|
|
|
%description chardev-spice
|
|
This package contains a module for Spice chardev support for QEMU.
|
|
|
|
%files chardev-spice
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/08
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/chardev-spice.so
|
|
|
|
%package hw-display-qxl
|
|
Summary: QXL display support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Provides: %name:%_datadir/%name/forsplits/01
|
|
Requires: qemu-ui-spice-core
|
|
%{qemu_module_conflicts}
|
|
|
|
%description hw-display-qxl
|
|
This package contains a module for QXL display support for QEMU.
|
|
|
|
%files hw-display-qxl
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/01
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/hw-display-qxl.so
|
|
|
|
%package hw-display-virtio-gpu
|
|
Summary: Virtio GPU display support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Provides: %name:%_datadir/%name/forsplits/04
|
|
%{qemu_module_conflicts}
|
|
|
|
%description hw-display-virtio-gpu
|
|
This package contains a module for Virtio GPU display support for QEMU.
|
|
|
|
%files hw-display-virtio-gpu
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/04
|
|
%_libdir/%name/hw-display-virtio-gpu.so
|
|
%_libdir/%name/hw-display-virtio-gpu-gl.so
|
|
|
|
%package hw-display-virtio-gpu-pci
|
|
Summary: Virtio-gpu pci device for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Requires: qemu-hw-display-virtio-gpu
|
|
Provides: %name:%_datadir/%name/forsplits/11
|
|
%{qemu_module_conflicts}
|
|
|
|
%description hw-display-virtio-gpu-pci
|
|
This package contains a module providing the virtio gpu pci device for QEMU.
|
|
|
|
%files hw-display-virtio-gpu-pci
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/11
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/hw-display-virtio-gpu-pci.so
|
|
%_libdir/%name/hw-display-virtio-gpu-pci-gl.so
|
|
|
|
%package hw-display-virtio-vga
|
|
Summary: Virtio vga device for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Provides: %name:%_datadir/%name/forsplits/12
|
|
%{qemu_module_conflicts}
|
|
|
|
%description hw-display-virtio-vga
|
|
This package contains a module providing the virtio vga device for QEMU.
|
|
|
|
%files hw-display-virtio-vga
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/12
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/hw-display-virtio-vga.so
|
|
%_libdir/%name/hw-display-virtio-vga-gl.so
|
|
|
|
%package hw-s390x-virtio-gpu-ccw
|
|
Summary: S390x virtio-gpu ccw device for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Requires: qemu-hw-display-virtio-gpu
|
|
Provides: %name:%_datadir/%name/forsplits/13
|
|
%{qemu_module_conflicts}
|
|
|
|
%description hw-s390x-virtio-gpu-ccw
|
|
This package contains a module providing the s390x virtio gpu ccw device for
|
|
QEMU.
|
|
|
|
%files hw-s390x-virtio-gpu-ccw
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/13
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/hw-s390x-virtio-gpu-ccw.so
|
|
|
|
%package hw-usb-redirect
|
|
Summary: USB redirection support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Provides: %name:%_datadir/%name/forsplits/02
|
|
%{qemu_module_conflicts}
|
|
|
|
%description hw-usb-redirect
|
|
This package contains a module for USB redirection support for QEMU.
|
|
|
|
%files hw-usb-redirect
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/02
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/hw-usb-redirect.so
|
|
|
|
%package hw-usb-smartcard
|
|
Summary: USB smartcard support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Provides: %name:%_datadir/%name/forsplits/03
|
|
%{qemu_module_conflicts}
|
|
|
|
%description hw-usb-smartcard
|
|
This package contains a modules for USB smartcard support for QEMU.
|
|
|
|
%files hw-usb-smartcard
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/03
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/hw-usb-smartcard.so
|
|
|
|
%package hw-usb-host
|
|
Summary: USB passthrough driver support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Provides: %name:%_datadir/%name/forsplits/14
|
|
%{qemu_module_conflicts}
|
|
|
|
%description hw-usb-host
|
|
This package contains a modules for USB passthrough driver for QEMU.
|
|
|
|
%files hw-usb-host
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/14
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/hw-usb-host.so
|
|
|
|
%package ui-dbus
|
|
Summary: D-Bus based UI support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
%{qemu_module_conflicts}
|
|
|
|
%description ui-dbus
|
|
This package contains a module for doing D-Bus based UI for QEMU.
|
|
|
|
%files ui-dbus
|
|
%defattr(-, root, root)
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/ui-dbus.so
|
|
|
|
%package ui-curses
|
|
Summary: Curses based UI support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
%{qemu_module_conflicts}
|
|
|
|
%description ui-curses
|
|
This package contains a module for doing curses based UI for QEMU.
|
|
|
|
%files ui-curses
|
|
%defattr(-, root, root)
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/ui-curses.so
|
|
|
|
%package ui-gtk
|
|
Summary: GTK based UI support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Requires: qemu-ui-opengl
|
|
%{qemu_module_conflicts}
|
|
|
|
%description ui-gtk
|
|
This package contains a module for doing GTK based UI for QEMU.
|
|
|
|
%files ui-gtk
|
|
%defattr(-, root, root)
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/ui-gtk.so
|
|
|
|
%package ui-opengl
|
|
Summary: OpenGL based UI support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Provides: %name:%_datadir/%name/forsplits/10
|
|
%{qemu_module_conflicts}
|
|
|
|
%description ui-opengl
|
|
This package contains a module for doing OpenGL based UI for QEMU.
|
|
|
|
%files ui-opengl
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/10
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/ui-egl-headless.so
|
|
%_libdir/%name/ui-opengl.so
|
|
|
|
%package ui-spice-app
|
|
Summary: Spice UI support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Requires: qemu-chardev-spice
|
|
Requires: qemu-ui-spice-core
|
|
%{qemu_module_conflicts}
|
|
|
|
%description ui-spice-app
|
|
This package contains a module for doing Spice based UI for QEMU.
|
|
|
|
%files ui-spice-app
|
|
%defattr(-, root, root)
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/ui-spice-app.so
|
|
|
|
%package ui-spice-core
|
|
Summary: Core Spice support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Provides: %name:%_datadir/%name/forsplits/09
|
|
Requires: qemu-ui-opengl
|
|
# This next Requires is only since virt-manager expects audio support
|
|
Requires: qemu-audio-spice
|
|
%{qemu_module_conflicts}
|
|
|
|
%description ui-spice-core
|
|
This package contains a module with core Spice support for QEMU.
|
|
|
|
%files ui-spice-core
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/09
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/ui-spice-core.so
|
|
|
|
%package vhost-user-gpu
|
|
Summary: Vhost user mode virtio-gpu 2D/3D rendering backend for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
%{qemu_module_conflicts}
|
|
|
|
%description vhost-user-gpu
|
|
This package contains a vhost user mode virtio-gpu 2D/3D rendering backend for
|
|
QEMU.
|
|
|
|
%files vhost-user-gpu
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name/vhost-user
|
|
%_datadir/%name/vhost-user/50-qemu-gpu.json
|
|
%_libexecdir/vhost-user-gpu
|
|
|
|
%package tools
|
|
Summary: Tools for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Requires(pre): permissions
|
|
Requires: group(kvm)
|
|
Recommends: multipath-tools
|
|
Recommends: qemu-block-curl
|
|
%if 0%{?with_rbd}
|
|
Recommends: qemu-block-rbd
|
|
%endif
|
|
|
|
%description tools
|
|
This package contains various QEMU related tools, including a bridge helper,
|
|
a virtfs helper, ivshmem, disk utilities and scripts for various purposes.
|
|
|
|
%files tools
|
|
%defattr(-, root, root)
|
|
%_bindir/analyze-migration.py
|
|
%_bindir/qemu-edid
|
|
%_bindir/qemu-img
|
|
%_bindir/qemu-io
|
|
%_bindir/qemu-keymap
|
|
%_bindir/qemu-nbd
|
|
%_bindir/qemu-pr-helper
|
|
%_bindir/qemu-storage-daemon
|
|
%_bindir/vmstate-static-checker.py
|
|
%_bindir/vmxcap
|
|
%verify(not mode) %attr(4750,root,kvm) %_libexecdir/qemu-bridge-helper
|
|
%_libexecdir/virtfs-proxy-helper
|
|
%_libexecdir/virtiofsd
|
|
%_mandir/man1/qemu-img.1.gz
|
|
%_mandir/man1/virtfs-proxy-helper.1.gz
|
|
%_mandir/man8/qemu-nbd.8.gz
|
|
%_mandir/man8/qemu-pr-helper.8.gz
|
|
%dir %_sysconfdir/%name
|
|
%config %_sysconfdir/%name/bridge.conf
|
|
|
|
%post tools
|
|
%set_permissions %_libexecdir/qemu-bridge-helper
|
|
|
|
%verifyscript tools
|
|
%verify_permissions %_libexecdir/qemu-bridge-helper
|
|
|
|
%package ivshmem-tools
|
|
Summary: Inter-VM Shared Memory Tools for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Provides: %name:%_datadir/%name/forsplits/07
|
|
|
|
%description ivshmem-tools
|
|
This package contains a sample shared memory client and server which utilize
|
|
QEMU's Inter-VM shared memory device as specified by the ivshmem client-server
|
|
protocol specification documented in docs/specs/ivshmem-spec.txt in QEMU source
|
|
code.
|
|
|
|
%files ivshmem-tools
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/07
|
|
%_bindir/ivshmem-client
|
|
%_bindir/ivshmem-server
|
|
|
|
%package guest-agent
|
|
Summary: Guest agent for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Requires: group(kvm)
|
|
Requires(post): udev
|
|
Supplements: modalias(acpi*:QEMU0002%3A*)
|
|
Supplements: modalias(pci:v00005853d00000001sv*sd*bc*sc*i*)
|
|
Supplements: modalias(pci:v0000FFFDd00000101sv*sd*bc*sc*i*)
|
|
%{?systemd_ordering}
|
|
|
|
%description guest-agent
|
|
This package contains the QEMU guest agent. It is installed in the linux guest
|
|
to provide information and control at the guest OS level.
|
|
|
|
%files guest-agent
|
|
%defattr(-, root, root)
|
|
%attr(0755,root,kvm) %_bindir/qemu-ga
|
|
%dir %_docdir/%name/interop
|
|
%_docdir/%name/interop/qemu-ga.html
|
|
%_mandir/man8/qemu-ga.8.gz
|
|
%{_unitdir}/qemu-guest-agent.service
|
|
/usr/lib/udev/rules.d/80-qemu-ga.rules
|
|
|
|
%pre guest-agent
|
|
%service_add_pre qemu-guest-agent.service
|
|
|
|
%post guest-agent
|
|
%service_add_post qemu-guest-agent.service
|
|
if [ -e /dev/virtio-ports/org.qemu.guest_agent.0 ]; then
|
|
/usr/bin/systemctl start qemu-guest-agent.service || :
|
|
fi
|
|
|
|
%preun guest-agent
|
|
if [ -e /dev/virtio-ports/org.qemu.guest_agent.0 ]; then
|
|
/usr/bin/systemctl stop qemu-guest-agent.service || :
|
|
fi
|
|
|
|
%postun guest-agent
|
|
%service_del_postun_without_restart qemu-guest-agent.service
|
|
if [ "$1" = "1" ] ; then
|
|
if [ -e /dev/virtio-ports/org.qemu.guest_agent.0 ]; then
|
|
/usr/bin/systemctl restart qemu-guest-agent.service || :
|
|
fi
|
|
fi
|
|
|
|
%package ksm
|
|
Summary: Kernel Samepage Merging services
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Requires(pre): coreutils
|
|
Requires(post): coreutils
|
|
|
|
%description ksm
|
|
Kernel Samepage Merging (KSM) is a memory-saving de-duplication feature, that
|
|
merges anonymous (private) pages (not pagecache ones).
|
|
|
|
This package provides a service file for starting and stopping KSM.
|
|
|
|
%files ksm
|
|
%defattr(-, root, root)
|
|
%{_unitdir}/ksm.service
|
|
|
|
%pre ksm
|
|
%service_add_pre ksm.service
|
|
|
|
%post ksm
|
|
%service_add_post ksm.service
|
|
|
|
%preun ksm
|
|
%service_del_preun ksm.service
|
|
|
|
%postun ksm
|
|
%service_del_postun ksm.service
|
|
|
|
%package accel-tcg-x86
|
|
Summary: TCG accelerator for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Provides: %name:%_datadir/%name/forsplits/15
|
|
%{qemu_module_conflicts}
|
|
|
|
%description accel-tcg-x86
|
|
TCG is the QEMU binary translator, responsible for converting from target to
|
|
host instruction set.
|
|
|
|
This package provides the TCG accelerator for QEMU.
|
|
|
|
%files accel-tcg-x86
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/15
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/accel-tcg-i386.so
|
|
%_libdir/%name/accel-tcg-x86_64.so
|
|
|
|
%package accel-qtest
|
|
Summary: QTest accelerator for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
Provides: %name:%_datadir/%name/forsplits/16
|
|
%{qemu_module_conflicts}
|
|
|
|
%description accel-qtest
|
|
QTest is a device emulation testing framework. It is useful to test device
|
|
models.
|
|
|
|
This package provides QTest accelerator for testing QEMU.
|
|
|
|
%files accel-qtest
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/16
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/accel-qtest-aarch64.so
|
|
%_libdir/%name/accel-qtest-alpha.so
|
|
%_libdir/%name/accel-qtest-arm.so
|
|
%_libdir/%name/accel-qtest-avr.so
|
|
%_libdir/%name/accel-qtest-cris.so
|
|
%_libdir/%name/accel-qtest-hppa.so
|
|
%_libdir/%name/accel-qtest-i386.so
|
|
%_libdir/%name/accel-qtest-m68k.so
|
|
%_libdir/%name/accel-qtest-microblaze.so
|
|
%_libdir/%name/accel-qtest-microblazeel.so
|
|
%_libdir/%name/accel-qtest-mips.so
|
|
%_libdir/%name/accel-qtest-mips64.so
|
|
%_libdir/%name/accel-qtest-mips64el.so
|
|
%_libdir/%name/accel-qtest-mipsel.so
|
|
%_libdir/%name/accel-qtest-nios2.so
|
|
%_libdir/%name/accel-qtest-or1k.so
|
|
%_libdir/%name/accel-qtest-ppc.so
|
|
%_libdir/%name/accel-qtest-ppc64.so
|
|
%_libdir/%name/accel-qtest-riscv32.so
|
|
%_libdir/%name/accel-qtest-riscv64.so
|
|
%_libdir/%name/accel-qtest-rx.so
|
|
%_libdir/%name/accel-qtest-s390x.so
|
|
%_libdir/%name/accel-qtest-sh4.so
|
|
%_libdir/%name/accel-qtest-sh4eb.so
|
|
%_libdir/%name/accel-qtest-sparc.so
|
|
%_libdir/%name/accel-qtest-sparc64.so
|
|
%_libdir/%name/accel-qtest-tricore.so
|
|
%_libdir/%name/accel-qtest-x86_64.so
|
|
%_libdir/%name/accel-qtest-xtensa.so
|
|
%_libdir/%name/accel-qtest-xtensaeb.so
|
|
|
|
%if 0%{?with_rbd}
|
|
%package block-rbd
|
|
Summary: Rados Block Device (Ceph) support for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
%{qemu_module_conflicts}
|
|
|
|
%description block-rbd
|
|
This package contains a module for accessing ceph (rbd,rados) image files
|
|
for QEMU.
|
|
|
|
%files block-rbd
|
|
%defattr(-, root, root)
|
|
%dir %_libdir/%name
|
|
%_libdir/%name/block-rbd.so
|
|
# End of "if with_rbd"
|
|
%endif
|
|
|
|
%if %{legacy_qemu_kvm}
|
|
%package kvm
|
|
Summary: Wrapper to enable KVM acceleration under QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
%ifarch %ix86 x86_64
|
|
Requires: qemu-x86 = %{qemuver}
|
|
%endif
|
|
%ifarch s390x
|
|
Requires: qemu-s390x = %{qemuver}
|
|
%endif
|
|
Provides: kvm = %{qemuver}
|
|
Obsoletes: kvm < %{qemuver}
|
|
|
|
%description kvm
|
|
%{generic_qemu_description}
|
|
|
|
This package provides a symlink to the main QEMU emulator used for KVM
|
|
virtualization. The symlink is named qemu-kvm, which causes the QEMU program
|
|
to enable the KVM accelerator, due to the name reference ending with 'kvm'.
|
|
This package is an artifact of the early origins of QEMU, and is deprecated.
|
|
|
|
%files kvm
|
|
%defattr(-,root,root)
|
|
%_bindir/qemu-kvm
|
|
%dir %_docdir/qemu-kvm
|
|
%_docdir/qemu-kvm/kvm-supported.html
|
|
%_docdir/qemu-kvm/kvm-supported.txt
|
|
%_mandir/man1/qemu-kvm.1.gz
|
|
# End of "if legacy_qemu_kvm"
|
|
%endif
|
|
|
|
%if %{build_ppc_firmware}
|
|
%package SLOF
|
|
Summary: Slimline Open Firmware - SLOF
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
BuildArch: noarch
|
|
|
|
%description SLOF
|
|
Slimline Open Firmware (SLOF) is an implementation of the IEEE 1275 standard.
|
|
It can be used as partition firmware for pSeries machines running on QEMU or KVM.
|
|
|
|
%files SLOF
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%_datadir/%name/slof.bin
|
|
|
|
%package skiboot
|
|
Summary: OPAL firmware (aka skiboot), used in booting OpenPOWER systems
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
BuildArch: noarch
|
|
Requires(post): update-alternatives
|
|
Requires(postun):update-alternatives
|
|
Provides: %name:%_datadir/%name/forsplits/06
|
|
|
|
%description skiboot
|
|
Provides OPAL (OpenPower Abstraction Layer) firmware, aka skiboot, as
|
|
traditionally packaged with QEMU.
|
|
|
|
%files skiboot
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%dir %_datadir/%name/forsplits
|
|
%_datadir/%name/forsplits/06
|
|
%_datadir/%name/skiboot.lid
|
|
%_datadir/%name/skiboot.lid.qemu
|
|
%ghost %_sysconfdir/alternatives/skiboot.lid
|
|
|
|
%post skiboot
|
|
update-alternatives --install \
|
|
%{_datadir}/%name/skiboot.lid skiboot.lid %{_datadir}/%name/skiboot.lid.qemu 15
|
|
|
|
%preun skiboot
|
|
if [ ! -f %{_datadir}/%name/skiboot.lid.qemu ] ; then
|
|
update-alternatives --remove skiboot.lid %{_datadir}/%name/skiboot.lid.qemu
|
|
fi
|
|
# End of "if build_ppc_firmware"
|
|
%endif
|
|
|
|
%if %{build_x86_firmware}
|
|
%package microvm
|
|
Summary: x86 MicroVM firmware for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{qemuver}
|
|
Release: 0
|
|
BuildArch: noarch
|
|
|
|
%description microvm
|
|
This package provides minimal x86 firmware for booting certain guests under
|
|
QEMU. qboot provides the minimum resources needed to boot PVH and bzImages.
|
|
bios-microvm, created from a minimal seabios configuration, provides slightly
|
|
wider support than qboot, but still focuses on quick boot up.
|
|
|
|
%files microvm
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%_datadir/%name/bios-microvm.bin
|
|
%_datadir/%name/qboot.rom
|
|
|
|
%package seabios
|
|
Summary: x86 Legacy BIOS for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{sbver}
|
|
Release: 0
|
|
BuildArch: noarch
|
|
Conflicts: %name < 1.6.0
|
|
|
|
%description seabios
|
|
SeaBIOS is an open source implementation of a 16bit x86 BIOS. SeaBIOS
|
|
is the default and legacy BIOS for QEMU.
|
|
|
|
%files seabios
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%_datadir/%name/bios.bin
|
|
%_datadir/%name/bios-256k.bin
|
|
%_datadir/%name/firmware/50-seabios-256k.json
|
|
%_datadir/%name/firmware/60-seabios-128k.json
|
|
|
|
%package vgabios
|
|
Summary: VGA BIOSes for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: %{sbver}
|
|
Release: 0
|
|
BuildArch: noarch
|
|
Conflicts: %name < 1.6.0
|
|
|
|
%description vgabios
|
|
VGABIOS provides the video ROM BIOSes for the following variants of VGA
|
|
emulated devices: Std VGA, QXL, Cirrus CLGD 5446 and VMware emulated
|
|
video card. For use with QEMU.
|
|
|
|
%files vgabios
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%_datadir/%name/vgabios.bin
|
|
%_datadir/%name/vgabios-ati.bin
|
|
%_datadir/%name/vgabios-bochs-display.bin
|
|
%_datadir/%name/vgabios-cirrus.bin
|
|
%_datadir/%name/vgabios-qxl.bin
|
|
%_datadir/%name/vgabios-ramfb.bin
|
|
%_datadir/%name/vgabios-stdvga.bin
|
|
%_datadir/%name/vgabios-virtio.bin
|
|
%_datadir/%name/vgabios-vmware.bin
|
|
|
|
%package sgabios
|
|
Summary: Serial Graphics Adapter BIOS for QEMU
|
|
Group: System/Emulators/PC
|
|
Version: 8
|
|
Release: 0
|
|
BuildArch: noarch
|
|
Conflicts: %name < 1.6.0
|
|
|
|
%description sgabios
|
|
The Google Serial Graphics Adapter BIOS or SGABIOS provides a means for legacy
|
|
x86 software to communicate with an attached serial console as if a video card
|
|
were attached. For use with QEMU.
|
|
|
|
%files sgabios
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%_datadir/%name/sgabios.bin
|
|
|
|
%package ipxe
|
|
Summary: PXE ROMs for QEMU NICs
|
|
Group: System/Emulators/PC
|
|
Version: 1.0.0+
|
|
Release: 0
|
|
BuildArch: noarch
|
|
Conflicts: %name < 1.6.0
|
|
|
|
%description ipxe
|
|
Provides Preboot Execution Environment (PXE) ROM support for various emulated
|
|
network adapters available with QEMU.
|
|
|
|
%files ipxe
|
|
%defattr(-, root, root)
|
|
%dir %_datadir/%name
|
|
%_datadir/%name/efi-e1000.rom
|
|
%_datadir/%name/efi-e1000e.rom
|
|
%_datadir/%name/efi-eepro100.rom
|
|
%_datadir/%name/efi-ne2k_pci.rom
|
|
%_datadir/%name/efi-pcnet.rom
|
|
%_datadir/%name/efi-rtl8139.rom
|
|
%_datadir/%name/efi-virtio.rom
|
|
%_datadir/%name/efi-vmxnet3.rom
|
|
%_datadir/%name/pxe-e1000.rom
|
|
%_datadir/%name/pxe-eepro100.rom
|
|
%_datadir/%name/pxe-ne2k_pci.rom
|
|
%_datadir/%name/pxe-pcnet.rom
|
|
%_datadir/%name/pxe-rtl8139.rom
|
|
%_datadir/%name/pxe-virtio.rom
|
|
# End of "if build_x86_firmware"
|
|
%endif
|
|
|
|
# End of description and files for qemu and all its subpackages
|
|
%endif
|
|
|
|
%prep
|
|
%if 0%{?sle_version} <= 150400
|
|
# Apparently, autosetup does not work, not even in 15.4. So,
|
|
# keep 'setup' plus the generated list of patches here for a
|
|
# while. Hopefully we'll be able to get rid of this soon enough.
|
|
%setup -q -n %{srcname}-%{expand:%%(SV=%{srcver};echo ${SV%%%%+git*})}
|
|
%patch00000 -p1
|
|
%patch00001 -p1
|
|
%patch00002 -p1
|
|
%patch00003 -p1
|
|
%patch00004 -p1
|
|
%patch00005 -p1
|
|
%patch00006 -p1
|
|
%patch00007 -p1
|
|
%patch00008 -p1
|
|
%patch00009 -p1
|
|
%patch00010 -p1
|
|
%patch00011 -p1
|
|
%patch00012 -p1
|
|
%patch00013 -p1
|
|
%patch00014 -p1
|
|
%patch00015 -p1
|
|
%patch00016 -p1
|
|
%patch00017 -p1
|
|
%patch00018 -p1
|
|
%patch00019 -p1
|
|
%patch00020 -p1
|
|
%patch00021 -p1
|
|
%patch00022 -p1
|
|
%patch00023 -p1
|
|
%patch00024 -p1
|
|
%patch00025 -p1
|
|
%patch00026 -p1
|
|
%patch00027 -p1
|
|
%patch00028 -p1
|
|
%patch00029 -p1
|
|
%patch00030 -p1
|
|
%patch00031 -p1
|
|
%patch00032 -p1
|
|
%patch00033 -p1
|
|
%patch00034 -p1
|
|
%patch00035 -p1
|
|
%patch00036 -p1
|
|
%ifarch aarch64
|
|
%patch00037 -p1
|
|
%endif
|
|
%ifarch %arm %ix86 ppc
|
|
%patch00038 -p1
|
|
%endif
|
|
%patch00039 -p1
|
|
%patch00040 -p1
|
|
%patch00041 -p1
|
|
%patch00042 -p1
|
|
%if %{legacy_qemu_kvm}
|
|
%patch00043 -p1
|
|
%endif
|
|
%patch00044 -p1
|
|
%patch00045 -p1
|
|
%patch00046 -p1
|
|
%patch00047 -p1
|
|
%patch00048 -p1
|
|
%patch00049 -p1
|
|
%patch00050 -p1
|
|
%patch00051 -p1
|
|
%patch00052 -p1
|
|
%patch00053 -p1
|
|
%patch00054 -p1
|
|
%patch00055 -p1
|
|
%patch00056 -p1
|
|
%patch00057 -p1
|
|
%patch00058 -p1
|
|
%patch00059 -p1
|
|
%patch01000 -p1
|
|
%patch01001 -p1
|
|
%patch01002 -p1
|
|
%patch02000 -p1
|
|
%if 0%{?patch-possibly-applied-elsewhere}
|
|
%patch02001 -p1
|
|
%endif
|
|
%patch02002 -p1
|
|
%patch02003 -p1
|
|
%patch02004 -p1
|
|
%patch03000 -p1
|
|
%patch03001 -p1
|
|
%patch04000 -p1
|
|
%patch05000 -p1
|
|
%patch11000 -p1
|
|
%patch13000 -p1
|
|
%else
|
|
%autosetup -p1 -n %{srcname}-%{expand:%%(SV=%{srcver};echo ${SV%%%%+git*})}
|
|
%endif
|
|
|
|
%if "%{name}" == "qemu"
|
|
# Specific preparation steps for building qemu
|
|
|
|
# for the record, this set of firmware files is installed, but we don't
|
|
# build (yet): bamboo.dtb canyonlands.dtb hppa-firmware.img openbios-ppc
|
|
# openbios-sparc32 openbios-sparc64 palcode-clipper petalogix-ml605.dtb
|
|
# petalogix-s3adsp1800.dtb QEMU,cgthree.bin QEMU,tcx.bin qemu_vga.ndrv
|
|
# u-boot.e500 u-boot-sam460-20100605.bin opensbi-riscv32-generic-fw_dynamic.bin
|
|
# opensbi-riscv32-generic-fw_dynamic.elfnpcm7xx_bootrom.bin vof.bin
|
|
# vof-nvram.bin
|
|
|
|
# Note that:
|
|
# - default firmwares are built "by default", i.e., they're built automatically
|
|
# during the process of building QEMU (on each specific arch)
|
|
# - extra firmwares are built "manually" (see below) from their own sources
|
|
# (which, typically, are submodules checked out in the {srcdi}r/roms directory)
|
|
%define ppc_default_firmware %{nil}
|
|
%define ppc_extra_firmware {skiboot.lid slof.bin}
|
|
%define riscv64_default_firmware %{nil}
|
|
%define riscv64_extra_firmware {opensbi-riscv64-generic-fw_dynamic.bin}
|
|
%define s390x_default_firmware {s390-ccw.img s390-netboot.img}
|
|
%define s390x_extra_firmware %{nil}
|
|
%define x86_default_firmware {linuxboot.bin linuxboot_dma.bin multiboot.bin \
|
|
multiboot_dma.bin kvmvapic.bin pvh.bin}
|
|
%define x86_extra_firmware {bios.bin bios-256k.bin bios-microvm.bin qboot.rom \
|
|
pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom pxe-pcnet.rom pxe-rtl8139.rom \
|
|
pxe-virtio.rom sgabios.bin vgabios-ati.bin vgabios-bochs-display.bin \
|
|
vgabios.bin vgabios-cirrus.bin vgabios-qxl.bin vgabios-ramfb.bin \
|
|
vgabios-stdvga.bin vgabios-virtio.bin vgabios-vmware.bin \
|
|
efi-e1000.rom efi-e1000e.rom efi-eepro100.rom efi-ne2k_pci.rom efi-pcnet.rom \
|
|
efi-rtl8139.rom efi-virtio.rom efi-vmxnet3.rom}
|
|
|
|
# Complete list of all the firmwares that we build, if we consider
|
|
# all the builds, on all the arches.
|
|
%define firmware { \
|
|
%{ppc_default_firmware} %{ppc_extra_firmware} \
|
|
%{riscv64_default_firmware} %{riscv64_extra_firmware} \
|
|
%{s390x_default_firmware} %{s390x_extra_firmware} \
|
|
%{x86_default_firmware} %{x86_extra_firmware} }
|
|
|
|
# Note that:
|
|
# - {arch}_default_built_firmware are the firmwares that we will be built by
|
|
# default in this particular build, on the arch where we currently are on
|
|
# - {arch}_extra_built_fimrware, likewise, but for extra firmwares, built manually
|
|
%ifarch ppc64 ppc64le
|
|
%define ppc_default_built_firmware %{ppc_default_firmware}
|
|
%endif
|
|
%ifarch riscv64
|
|
%define riscv64_default_built_firmware %{riscv64_default_firmware}
|
|
%endif
|
|
%ifarch s390x
|
|
%define s390x_default_built_firmware %{s390x_default_firmware}
|
|
%endif
|
|
%ifarch %ix86 x86_64
|
|
%define x86_default_built_firmware %{x86_default_firmware}
|
|
%endif
|
|
|
|
%if %{build_opensbi_firmware}
|
|
%define riscv64_extra_built_firmware %{riscv64_extra_firmware}
|
|
%endif
|
|
%if %{build_ppc_firmware}
|
|
%define ppc_extra_built_firmware %{ppc_extra_firmware}
|
|
%endif
|
|
%if %{build_x86_firmware}
|
|
%define x86_extra_built_firmware %{x86_extra_firmware}
|
|
%endif
|
|
|
|
# List of only firmwares that will actually be built, in this instance
|
|
%define built_firmware { \
|
|
%{?ppc_default_built_firmware} %{?ppc_extra_built_firmware} \
|
|
%{?riscv64_default_built_firmware} %{?riscv64_extra_built_firmware} \
|
|
%{?s390x_default_built_firmware} %{?s390x_extra_built_firmware} \
|
|
%{?x86_default_built_firmware} %{?x86_extra_built_firmware} }
|
|
|
|
# End of source preparation for qemu
|
|
%endif
|
|
|
|
%build
|
|
|
|
%if %{legacy_qemu_kvm}
|
|
%ifarch s390x
|
|
cp %{SOURCE13} docs/supported.rst
|
|
%else
|
|
cp %{SOURCE13} docs/supported.rst
|
|
%endif
|
|
%endif
|
|
|
|
mkdir -p %blddir
|
|
cd %blddir
|
|
|
|
# We define a few general and common options and then we disable
|
|
# pretty much everything. Afterwards, there is a section for each
|
|
# of the flavors where we explicitly enable all the feature we want
|
|
# for them.
|
|
|
|
# TODO: Check whether we want to enable the followings:
|
|
# * avx2
|
|
# * avx512f
|
|
# * trace-backends=dtrace
|
|
# * fuse
|
|
%srcdir/configure \
|
|
--docdir=%_docdir \
|
|
--extra-cflags="%{optflags}" \
|
|
--firmwarepath=%_datadir/%name \
|
|
--libdir=%_libdir \
|
|
--libexecdir=%_libexecdir \
|
|
--localstatedir=%_localstatedir \
|
|
--prefix=%_prefix \
|
|
--sysconfdir=%_sysconfdir \
|
|
--with-git-submodules=ignore \
|
|
--with-pkgversion="%(echo '%{distro}' | sed 's/ (.*)//')" \
|
|
--python=%_bindir/python3 \
|
|
--disable-alsa \
|
|
--disable-attr \
|
|
--disable-auth-pam \
|
|
--disable-avx2 \
|
|
--disable-avx512f \
|
|
--disable-block-drv-whitelist-in-tools \
|
|
--disable-bochs \
|
|
--disable-bpf \
|
|
--disable-brlapi \
|
|
--disable-bsd-user \
|
|
--disable-bzip2 \
|
|
--disable-cap-ng \
|
|
--disable-capstone \
|
|
--disable-cfi \
|
|
--disable-cfi-debug \
|
|
--disable-cloop \
|
|
--disable-cocoa \
|
|
--disable-coreaudio \
|
|
--disable-coroutine-pool \
|
|
--disable-crypto-afalg \
|
|
--disable-curl \
|
|
--disable-curses \
|
|
--disable-dbus-display \
|
|
--disable-debug-info \
|
|
--disable-debug-mutex \
|
|
--disable-debug-tcg \
|
|
--disable-dmg \
|
|
--disable-docs \
|
|
--disable-dsound \
|
|
--disable-fdt \
|
|
--disable-fuse \
|
|
--disable-fuse-lseek \
|
|
--disable-fuzzing \
|
|
--disable-gcrypt \
|
|
--disable-gettext \
|
|
--disable-gio \
|
|
--disable-glusterfs \
|
|
--disable-gnutls \
|
|
--disable-gtk \
|
|
--disable-guest-agent \
|
|
--disable-guest-agent-msi \
|
|
--disable-hax \
|
|
--disable-hax \
|
|
--disable-hvf \
|
|
--disable-hvf \
|
|
--disable-iconv \
|
|
--disable-iconv \
|
|
--disable-install-blobs \
|
|
--disable-jack \
|
|
--disable-kvm \
|
|
--disable-kvm \
|
|
--disable-l2tpv3 \
|
|
--disable-libdaxctl \
|
|
--disable-libiscsi \
|
|
--disable-libnfs \
|
|
--disable-libpmem \
|
|
--disable-libssh \
|
|
--disable-libudev \
|
|
--disable-libusb \
|
|
--disable-linux-aio \
|
|
--disable-linux-io-uring \
|
|
--disable-linux-user \
|
|
--disable-live-block-migration \
|
|
--disable-lto \
|
|
--disable-lzfse \
|
|
--disable-lzo \
|
|
--disable-malloc-trim \
|
|
--disable-membarrier \
|
|
--disable-module-upgrades \
|
|
--disable-modules \
|
|
--disable-mpath \
|
|
--disable-multiprocess \
|
|
--disable-netmap \
|
|
--disable-nettle \
|
|
--disable-numa \
|
|
--disable-nvmm \
|
|
--disable-opengl \
|
|
--disable-oss \
|
|
--disable-pa \
|
|
--disable-parallels \
|
|
--disable-pie \
|
|
--disable-plugins \
|
|
--disable-pvrdma \
|
|
--disable-qcow1 \
|
|
--disable-qed \
|
|
--disable-qom-cast-debug \
|
|
--disable-rbd \
|
|
--disable-rdma \
|
|
--disable-replication \
|
|
--disable-rng-none \
|
|
--disable-safe-stack \
|
|
--disable-sanitizers \
|
|
--disable-sdl \
|
|
--disable-sdl-image \
|
|
--disable-seccomp \
|
|
--disable-selinux \
|
|
--disable-slirp \
|
|
--disable-slirp-smbd \
|
|
--disable-smartcard \
|
|
--disable-snappy \
|
|
--disable-sparse \
|
|
--disable-spice \
|
|
--disable-spice-protocol \
|
|
--disable-stack-protector \
|
|
--disable-strip \
|
|
--disable-system \
|
|
--disable-tcg \
|
|
--disable-tcg-interpreter \
|
|
--disable-tools \
|
|
--disable-tpm \
|
|
--disable-u2f \
|
|
--disable-usb-redir \
|
|
--disable-user \
|
|
--disable-vde \
|
|
--disable-vdi \
|
|
--disable-vhost-crypto \
|
|
--disable-vhost-kernel \
|
|
--disable-vhost-net \
|
|
--disable-vhost-scsi \
|
|
--disable-vhost-user \
|
|
--disable-vhost-user-blk-server \
|
|
--disable-vhost-user-fs \
|
|
--disable-vhost-vdpa \
|
|
--disable-vhost-vsock \
|
|
--disable-virglrenderer \
|
|
--disable-virtfs \
|
|
--disable-virtiofsd \
|
|
--disable-vnc \
|
|
--disable-vnc-jpeg \
|
|
--disable-vnc-png \
|
|
--disable-vnc-sasl \
|
|
--disable-vte \
|
|
--disable-vvfat \
|
|
--disable-werror \
|
|
--disable-whpx \
|
|
--disable-whpx \
|
|
--disable-xen \
|
|
--disable-xen-pci-passthrough \
|
|
--disable-xkbcommon \
|
|
--disable-zstd \
|
|
--without-default-devices \
|
|
%if %{with system_membarrier}
|
|
--enable-membarrier \
|
|
%endif
|
|
%if %{with malloc_trim}
|
|
--enable-malloc-trim \
|
|
%endif
|
|
%if "%{_lto_cflags}" != "%{nil}"
|
|
--enable-lto \
|
|
%endif
|
|
%if "%{name}" == "qemu-linux-user"
|
|
--static \
|
|
--enable-attr \
|
|
--enable-coroutine-pool \
|
|
--enable-linux-user \
|
|
--enable-selinux \
|
|
--enable-tcg \
|
|
%else
|
|
--disable-linux-user \
|
|
%ifarch x86_64
|
|
--enable-libpmem \
|
|
--enable-xen \
|
|
--enable-xen-pci-passthrough \
|
|
%endif
|
|
%ifnarch %arm s390x
|
|
--enable-numa \
|
|
%endif
|
|
%if %{kvm_available}
|
|
--enable-kvm \
|
|
%endif
|
|
%if 0%{?with_daxctl}
|
|
--enable-libdaxctl \
|
|
%endif
|
|
%if 0%{?with_uring}
|
|
--enable-linux-io-uring \
|
|
%endif
|
|
%if 0%{?with_rbd}
|
|
--enable-rbd \
|
|
%endif
|
|
--enable-alsa \
|
|
--enable-attr \
|
|
--enable-bochs \
|
|
--enable-brlapi \
|
|
--enable-bzip2 \
|
|
--enable-cap-ng \
|
|
--enable-cloop \
|
|
--enable-coroutine-pool \
|
|
--enable-curl \
|
|
--enable-curses \
|
|
--enable-dbus-display \
|
|
--enable-dmg \
|
|
--enable-docs \
|
|
--enable-fdt \
|
|
--enable-gcrypt \
|
|
--enable-gettext \
|
|
--enable-gio \
|
|
--enable-glusterfs \
|
|
--enable-gnutls \
|
|
--enable-gtk \
|
|
--enable-guest-agent \
|
|
--enable-iconv \
|
|
--enable-install-blobs \
|
|
--enable-jack \
|
|
--enable-l2tpv3 \
|
|
--enable-libiscsi \
|
|
--enable-libnfs \
|
|
--enable-libssh \
|
|
--enable-libudev \
|
|
--enable-libusb \
|
|
--enable-linux-aio \
|
|
--enable-live-block-migration \
|
|
--enable-lzfse \
|
|
--enable-lzo \
|
|
--enable-modules \
|
|
--enable-mpath \
|
|
--enable-opengl \
|
|
--enable-oss \
|
|
--enable-pa \
|
|
--enable-parallels \
|
|
--enable-pie \
|
|
--enable-pvrdma \
|
|
--enable-qcow1 \
|
|
--enable-qed \
|
|
--enable-rdma \
|
|
--enable-replication \
|
|
--enable-seccomp \
|
|
--enable-selinux \
|
|
--enable-slirp-smbd \
|
|
--enable-slirp=system \
|
|
--enable-smartcard \
|
|
--enable-snappy \
|
|
--enable-spice \
|
|
--enable-spice-protocol \
|
|
--enable-system \
|
|
--enable-tcg \
|
|
--enable-tools \
|
|
--enable-tpm \
|
|
--enable-usb-redir \
|
|
--enable-vde \
|
|
--enable-vdi \
|
|
--enable-vhost-crypto \
|
|
--enable-vhost-kernel \
|
|
--enable-vhost-net \
|
|
--enable-vhost-scsi \
|
|
--enable-vhost-user \
|
|
--enable-vhost-user-blk-server \
|
|
--enable-vhost-user-fs \
|
|
--enable-vhost-vdpa \
|
|
--enable-vhost-vsock \
|
|
--enable-virglrenderer \
|
|
--enable-virtfs \
|
|
--enable-virtiofsd \
|
|
--enable-vnc \
|
|
--enable-vnc-jpeg \
|
|
--enable-vnc-png \
|
|
--enable-vnc-sasl \
|
|
--enable-vte \
|
|
--enable-vvfat \
|
|
--enable-werror \
|
|
--enable-xkbcommon \
|
|
--enable-zstd \
|
|
--with-default-devices
|
|
# End of configure option ("name == qemu-linux-user" above)
|
|
%endif
|
|
|
|
%if "%{name}" == "qemu"
|
|
# For building QEMU and all the "default" firmwares, for each arch,
|
|
# for the package qemu, we first need to delete the firmware files that
|
|
# we intend to build...
|
|
#
|
|
# TODO: check if this can be common to qemu and qemu-linux-user
|
|
for i in %built_firmware
|
|
do
|
|
unlink %srcdir/pc-bios/$i
|
|
done
|
|
# End of unlinking pre-built firmwares for qemu
|
|
%endif
|
|
|
|
# Common build steps for qemu and qemu-linux-user
|
|
%make_build
|
|
|
|
%if "%{name}" == "qemu"
|
|
# ... Then, we need to reinstate the firmwares that have been built already
|
|
for i in %{?s390x_default_built_firmware}
|
|
do
|
|
cp pc-bios/s390-ccw/$i %srcdir/pc-bios/
|
|
done
|
|
|
|
for i in %{?x86_default_built_firmware}
|
|
do
|
|
cp pc-bios/optionrom/$i %srcdir/pc-bios/
|
|
done
|
|
|
|
# Build the "extra" firmwares. Note that the QEMU Makefile in {srcdir}/roms
|
|
# does some cross-compiler auto detection. So we often don't need to define
|
|
# or pass CROSS= and CROSS_COMPILE ourselves.
|
|
|
|
%if %{build_ppc_firmware}
|
|
# FIXME: check if we can upstream: Makefile-define-endianess-for-cross-buil.patch
|
|
%make_build -C %srcdir/roms skiboot
|
|
|
|
%make_build -C %srcdir/roms slof
|
|
%endif
|
|
|
|
%if %{build_opensbi_firmware}
|
|
%make_build -C %srcdir/roms opensbi64-generic
|
|
# End of "if build_ppc_firmware"
|
|
%endif
|
|
|
|
%if %{build_x86_firmware}
|
|
%make_build %{?_smp_mflags} -C %srcdir/roms bios \
|
|
SEABIOS_EXTRAVERSION="-rebuilt.opensuse.org" \
|
|
|
|
# FIXME: check if we can upstream: roms-Makefile-add-cross-file-to-qboot-me.patch
|
|
# and qboot-add-cross.ini-file-to-handle-aarch.patch
|
|
%make_build -C %srcdir/roms qboot
|
|
|
|
%make_build -C %srcdir/roms seavgabios \
|
|
|
|
%make_build -C %srcdir/roms seavgabios-ati \
|
|
|
|
%make_build -C %srcdir/roms pxerom
|
|
|
|
%make_build -C %srcdir/roms efirom \
|
|
EDK2_BASETOOLS_OPTFLAGS='-fPIE'
|
|
|
|
# We're currently not building firmware on ix86, but let's make sure this works
|
|
# fine if one enables it, e.g., locally (for debugging or something).
|
|
# FIXME: check if we can get rid or upstream: roms-sgabios-Fix-csum8-to-be-built-by-ho.patch
|
|
make -C %srcdir/roms sgabios HOSTCC=cc \
|
|
%ifnarch %ix86 x86_64
|
|
CC=x86_64-suse-linux-gcc LD=x86_64-suse-linux-ld \
|
|
%endif
|
|
|
|
%if %{force_fit_virtio_pxe_rom}
|
|
pushd %srcdir
|
|
patch -p1 < %_sourcedir/stub-out-the-SAN-req-s-in-int13.patch
|
|
popd
|
|
%make_build -C %srcdir/roms pxerom_variants=virtio pxerom_targets=1af41000 pxerom
|
|
%endif
|
|
|
|
for i in %supported_nics_large %unsupported_nics
|
|
do
|
|
if test "`stat -c '%s' %srcdir/pc-bios/pxe-$i.rom`" -gt "131072" ; then
|
|
echo "pxe rom is too large"
|
|
exit 1
|
|
fi
|
|
if test "`stat -c '%s' %srcdir/pc-bios/pxe-$i.rom`" -le "65536" ; then
|
|
./%srcdir/roms/ipxe/src/util/padimg.pl %srcdir/pc-bios/pxe-$i.rom -s 65536 -b 255
|
|
echo -ne "SEGMENT OVERAGE\0" >> %srcdir/pc-bios/pxe-$i.rom
|
|
fi
|
|
done
|
|
for i in %supported_nics_small
|
|
do
|
|
if test "`stat -c '%s' %srcdir/pc-bios/pxe-$i.rom`" -gt "65536" ; then
|
|
echo "pxe rom is too large"
|
|
exit 1
|
|
fi
|
|
done
|
|
# End of "if build_x86_firmware"
|
|
%endif
|
|
|
|
# End of the build for qemu
|
|
%endif
|
|
|
|
%install
|
|
cd %blddir
|
|
|
|
%make_build install DESTDIR=%{buildroot}
|
|
|
|
%if "%{name}" == "qemu-linux-user"
|
|
# Additional installation steps specific to qemu-linux-user
|
|
|
|
rm -rf %{buildroot}%_datadir/qemu/keymaps
|
|
unlink %{buildroot}%_datadir/qemu/trace-events-all
|
|
install -d -m 755 %{buildroot}%_sbindir
|
|
install -m 755 scripts/qemu-binfmt-conf.sh %{buildroot}%_sbindir
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-aarch64-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-aarch64_be-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-alpha-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-arm-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-armeb-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-cris-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-hexagon-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-hppa-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-i386-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-m68k-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-microblaze-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-microblazeel-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-mips-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-mips64-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-mips64el-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-mipsel-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-mipsn32-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-mipsn32el-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-nios2-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-or1k-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-ppc-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-ppc64-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-ppc64le-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-riscv32-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-riscv64-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-s390x-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-sh4-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-sh4eb-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-sparc-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-sparc32plus-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-sparc64-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-x86_64-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-xtensa-binfmt
|
|
ln -s qemu-binfmt %{buildroot}%_bindir/qemu-xtensaeb-binfmt
|
|
|
|
# End of additional installation steps for qemu-linux-user
|
|
%else
|
|
# Additional installation steps specific to qemu
|
|
|
|
%find_lang %name
|
|
install -d -m 0755 %{buildroot}%_datadir/%name/firmware
|
|
install -d -m 0755 %{buildroot}/usr/lib/supportconfig/plugins
|
|
install -d -m 0755 %{buildroot}%_sysconfdir/%name/firmware
|
|
install -D -m 0644 %{SOURCE4} %{buildroot}%_sysconfdir/%name/bridge.conf
|
|
install -D -m 0755 %{SOURCE3} %{buildroot}%_datadir/%name/qemu-ifup
|
|
install -D -p -m 0644 %{SOURCE8} %{buildroot}/usr/lib/udev/rules.d/80-qemu-ga.rules
|
|
install -D -m 0755 scripts/analyze-migration.py %{buildroot}%_bindir/analyze-migration.py
|
|
install -D -m 0755 scripts/vmstate-static-checker.py %{buildroot}%_bindir/vmstate-static-checker.py
|
|
install -D -m 0755 scripts/kvm/vmxcap %{buildroot}%_bindir/vmxcap
|
|
install -D -m 0755 %{SOURCE9} %{buildroot}/usr/lib/supportconfig/plugins/%name
|
|
install -D -m 0644 %{SOURCE10} %{buildroot}%_docdir/qemu-arm/supported.txt
|
|
install -D -m 0644 %{SOURCE11} %{buildroot}%_docdir/qemu-ppc/supported.txt
|
|
install -D -m 0644 %{SOURCE12} %{buildroot}%_docdir/qemu-x86/supported.txt
|
|
install -D -m 0644 %{SOURCE13} %{buildroot}%_docdir/qemu-s390x/supported.txt
|
|
|
|
%if %{legacy_qemu_kvm}
|
|
install -D -m 0644 %{SOURCE5} %{buildroot}%_mandir/man1/qemu-kvm.1.gz
|
|
install -d %{buildroot}%_docdir/qemu-kvm
|
|
%ifarch s390x
|
|
ln -s qemu-system-s390x %{buildroot}%_bindir/qemu-kvm
|
|
ln -s ../qemu-s390x/supported.txt %{buildroot}%_docdir/qemu-kvm/kvm-supported.txt
|
|
rst2html --exit-status=2 %{buildroot}%_docdir/qemu-s390x/supported.txt %{buildroot}%_docdir/qemu-kvm/kvm-supported.html
|
|
%else
|
|
ln -s qemu-system-x86_64 %{buildroot}%_bindir/qemu-kvm
|
|
ln -s ../qemu-x86/supported.txt %{buildroot}%_docdir/qemu-kvm/kvm-supported.txt
|
|
rst2html --exit-status=2 %{buildroot}%_docdir/qemu-x86/supported.txt %{buildroot}%_docdir/qemu-kvm/kvm-supported.html
|
|
# End of "ifarch s390x"
|
|
%endif
|
|
# End of "if legacy_qemu_kvm"
|
|
%endif
|
|
|
|
%if %{kvm_available}
|
|
install -D -m 0644 %{SOURCE1} %{buildroot}/usr/lib/udev/rules.d/80-kvm.rules
|
|
%endif
|
|
install -D -p -m 0644 %{SOURCE7} %{buildroot}%{_unitdir}/qemu-guest-agent.service
|
|
install -D -p -m 0644 %{SOURCE6} %{buildroot}%{_unitdir}/ksm.service
|
|
%ifarch s390x
|
|
install -D -m 0644 %{SOURCE2} %{buildroot}%{_prefix}/lib/modules-load.d/kvm.conf
|
|
# End of "if kvm_available"
|
|
%endif
|
|
|
|
# We rely on a separate project / package to provide edk2 firmware
|
|
unlink %{buildroot}%_datadir/%name/edk2-licenses.txt
|
|
unlink %{buildroot}%_datadir/%name/firmware/50-edk2-i386-secure.json
|
|
unlink %{buildroot}%_datadir/%name/firmware/50-edk2-x86_64-secure.json
|
|
unlink %{buildroot}%_datadir/%name/firmware/60-edk2-aarch64.json
|
|
unlink %{buildroot}%_datadir/%name/firmware/60-edk2-arm.json
|
|
unlink %{buildroot}%_datadir/%name/firmware/60-edk2-i386.json
|
|
unlink %{buildroot}%_datadir/%name/firmware/60-edk2-x86_64.json
|
|
unlink %{buildroot}%_datadir/%name/edk2-aarch64-code.fd
|
|
unlink %{buildroot}%_datadir/%name/edk2-arm-code.fd
|
|
unlink %{buildroot}%_datadir/%name/edk2-arm-vars.fd
|
|
unlink %{buildroot}%_datadir/%name/edk2-i386-code.fd
|
|
unlink %{buildroot}%_datadir/%name/edk2-i386-secure-code.fd
|
|
unlink %{buildroot}%_datadir/%name/edk2-i386-vars.fd
|
|
unlink %{buildroot}%_datadir/%name/edk2-x86_64-code.fd
|
|
unlink %{buildroot}%_datadir/%name/edk2-x86_64-secure-code.fd
|
|
|
|
# this was never meant for customer consumption - delete even though installed
|
|
unlink %{buildroot}%_bindir/elf2dmp
|
|
|
|
install -D -m 0644 %{SOURCE201} %{buildroot}%_datadir/%name/forsplits/pkg-split.txt
|
|
for X in 00 01 02 03 04 05 07 08 09 10 11 12 13 14 15 16 17 18 19
|
|
do
|
|
ln -s pkg-split.txt %{buildroot}%_datadir/%name/forsplits/$X
|
|
done
|
|
|
|
# For PPC and x86 firmwares, there are a few extra install steps necessary.
|
|
# In general, if we know that we have not built a firmware, remove it from the
|
|
# install base, as the one that we have there is the upstream binary, that got
|
|
# copied there during `make install`.
|
|
|
|
%if %{build_ppc_firmware}
|
|
# in support of update-alternatives
|
|
mv %{buildroot}%_datadir/%name/skiboot.lid %{buildroot}%_datadir/%name/skiboot.lid.qemu
|
|
# create a dummy target for /etc/alternatives/skiboot.lid
|
|
mkdir -p %{buildroot}%{_sysconfdir}/alternatives
|
|
ln -s -f %{_sysconfdir}/alternatives/skiboot.lid %{buildroot}%{_datadir}/%name/skiboot.lid
|
|
ln -s pkg-split.txt %{buildroot}%_datadir/%name/forsplits/06
|
|
%else
|
|
for f in %{ppc_extra_firmware} ; do
|
|
unlink %{buildroot}%_datadir/%name/$f
|
|
done
|
|
# End of "if build_ppc_fimrware"
|
|
%endif
|
|
|
|
# For riscv64 firmwares (currently, only opensbi), we leave them there in
|
|
# any case, because they're part of the qemu-extra package, and riscv is
|
|
# a bit special in many ways already.
|
|
|
|
%if %{build_x86_firmware}
|
|
install -D -m 0644 %{SOURCE14} %{buildroot}%_datadir/%name/firmware/50-seabios-256k.json
|
|
install -D -m 0644 %{SOURCE15} %{buildroot}%_datadir/%name/firmware/60-seabios-128k.json
|
|
%else
|
|
for f in %{x86_extra_firmware} ; do
|
|
unlink %{buildroot}%_datadir/%name/$f
|
|
done
|
|
# End of "if build_x86_firmware"
|
|
%endif
|
|
|
|
%suse_update_desktop_file qemu
|
|
|
|
# End of additional installation steps for qemu
|
|
%endif
|
|
|
|
# Common install steps for qemu and qemu-linux-user
|
|
%fdupes -s %{buildroot}
|
|
|
|
%check
|
|
cd %blddir
|
|
|
|
%if "%{name}" == "qemu"
|
|
# Let's try to run 'make check' for the qemu package
|
|
|
|
# Patch 'increase x86_64 physical bits to 42' requires that the DSDT used for
|
|
# acpi [q]tests is modified too. But it's binary, and that means we cannot
|
|
# do that in the patch itself. Instead, we keep a copy of the binary in the
|
|
# package sources, and put it in place now, before the tests themselves.
|
|
# If that patch is removed, the following line needs to go as well.
|
|
cp %{SOURCE202} %{srcdir}/tests/data/acpi/microvm/
|
|
|
|
# Compile the QOM test binary first, so that ...
|
|
%make_build tests/qtest/qom-test
|
|
# ... make comes in fresh and has lots of address space (needed for 32bit, bsc#957379)
|
|
# FIXME: is this still a problem?
|
|
|
|
# Let's build everything first
|
|
%make_build check-build
|
|
# Let's now run the 'make check' component individually, so we have
|
|
# more control on the options (like -j, etc)
|
|
%make_build check-unit
|
|
%make_build check-qapi-schema
|
|
%make_build check-softfloat
|
|
# This would be `make_build check-block`. But iotests are not reliable
|
|
# if ran in parallel in OBS, so let's be slow for now.
|
|
make -O V=1 VERBOSE=1 -j1 check-block
|
|
%make_build check-qtest
|
|
# Last step will be to run a full check-report, but we will
|
|
# enable this at a later point
|
|
#make -O V=1 VERBOSE=1 -j1 check-report.junit.xml
|
|
|
|
# End of checks for qemu
|
|
%else
|
|
# Let's run the relevant check for the qemu-linux-user package
|
|
|
|
%ifarch %ix86
|
|
%define qemu_arch i386
|
|
%endif
|
|
%ifarch x86_64
|
|
%define qemu_arch x86_64
|
|
%endif
|
|
%ifarch %arm
|
|
%define qemu_arch arm
|
|
%endif
|
|
%ifarch aarch64
|
|
%define qemu_arch aarch64
|
|
%endif
|
|
%ifarch ppc
|
|
%define qemu_arch ppc
|
|
%endif
|
|
%ifarch ppc64
|
|
%define qemu_arch ppc64
|
|
%endif
|
|
%ifarch ppc64le
|
|
%define qemu_arch ppc64le
|
|
%endif
|
|
%ifarch s390x
|
|
%define qemu_arch s390x
|
|
%endif
|
|
|
|
%ifarch %ix86 x86_64 %arm aarch64 ppc ppc64 ppc64le s390x
|
|
%ifnarch %arm
|
|
%{qemu_arch}-linux-user/qemu-%{qemu_arch} %_bindir/ls > /dev/null
|
|
%endif
|
|
%endif
|
|
|
|
%make_build check-softfloat
|
|
# End of the checks for qemu-linux-user
|
|
%endif
|
|
|
|
%changelog
|