diff --git a/README.openSUSE b/README.openSUSE
new file mode 100644
index 0000000..75b127f
--- /dev/null
+++ b/README.openSUSE
@@ -0,0 +1,53 @@
+
+
+This README contains additional information specific to the
+openSUSE package of roundcube.
+
+
+INSTALLATION
+============
+
+This application is packaged to integrate with Apache and MySQL but
+it can basically run with every webserver being able to run PHP and
+also use other SQL based database engines.
+
+After installation of the package the application will immediately
+be reachable from everywhere once Apache is enabled under the URL
+
+  http://IP-ADDRESS/roundcube
+
+The configuration is copied from the example config files from the
+package and therefore not really working.
+
+First step is to prepare the MySQL database for Roundcube:
+
+Setting up the mysql database can be done by creating an empty database,
+importing the table layout and granting the proper permissions to the
+roundcube user. Here is an example of that procedure:
+
+# mysql
+> CREATE DATABASE roundcubemail /*!40101 CHARACTER SET utf8 COLLATE utf8_general_ci */;
+> GRANT ALL PRIVILEGES ON roundcubemail.* TO roundcube@localhost
+  IDENTIFIED BY 'password';
+> quit
+
+# mysql roundcubemail < /srv/www/roundcubemail/SQL/mysql.initial.sql
+
+Note 1: 'password' is the master password for the roundcube user. It is strongly
+recommended you replace this with a more secure password. Please keep in
+mind: You need to specify this password later in '/etc/roundcubemail/db.inc.php'.
+
+To use the integrated web based installer you need to enable it first
+in /etc/roundcubemail/main.inc.php:
+
+$rcmail_config['enable_installer'] = true;
+
+IMPORTANT: This MUST be disabled again after installation is finished
+           for SECURITY reasons
+
+and then access
+
+  http://IP-ADDRESS/roundcube/installer
+
+to finish the installation.
+
diff --git a/roundcubemail-httpd.conf b/roundcubemail-httpd.conf
index e5131ab..ca95836 100644
--- a/roundcubemail-httpd.conf
+++ b/roundcubemail-httpd.conf
@@ -17,8 +17,8 @@ AddType text/x-component .htc
 
 <Directory __ROUNDCUBEPATH__>
   Order allow,deny
-  Allow from 127.0.0.1
-  #Allow from all
+  #Allow from 127.0.0.1
+  Allow from all
 
   Options -Indexes FollowSymLinks
 
diff --git a/roundcubemail.changes b/roundcubemail.changes
index f68c6d3..8b503de 100644
--- a/roundcubemail.changes
+++ b/roundcubemail.changes
@@ -1,3 +1,16 @@
+-------------------------------------------------------------------
+Sat May 12 17:59:17 UTC 2012 - wr@rosenauer.org
+
+- added README.openSUSE to document openSUSE specifics needed for
+  installation/configuration
+
+-------------------------------------------------------------------
+Mon Apr 30 13:50:22 UTC 2012 - wr@rosenauer.org
+
+- enable Roundcube access from everywhere by default after
+  installation
+- ship *.dist configuration files
+
 -------------------------------------------------------------------
 Sun Apr 15 18:38:01 UTC 2012 - wr@rosenauer.org
 
diff --git a/roundcubemail.spec b/roundcubemail.spec
index 4df49af..d24db0a 100644
--- a/roundcubemail.spec
+++ b/roundcubemail.spec
@@ -36,11 +36,14 @@ Requires:       php-openssl
 Requires:       php-session
 Requires:       php_any_db
 Recommends:     php-mysql
+Recommends:     php5-intl
+Recommends:     php5-fileinfo
 ## Requires: for upstream dep package
-#Requires:       php5-intl php5-pear-Auth_SASL
+#Requires:       php5-pear-Auth_SASL
 Source0:        %{name}-%{version}.tar.gz
 Source2:        %{name}-httpd.conf
 Source3:        %{name}-rpmlintrc
+Source4:        README.openSUSE
 # PATCH-FIX-OPENSUSE use the general config directory /etc
 Patch0:         %{name}-config-dir.patch
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
@@ -63,6 +66,7 @@ The user interface is fully skinnable using XHTML and CSS 2.
 %prep
 %setup -q -n %{name}-%{version}
 %patch0 -p1
+cp %{SOURCE4} .
 
 %build
 
@@ -70,10 +74,9 @@ The user interface is fully skinnable using XHTML and CSS 2.
 install -d -m 0755 %buildroot%roundcubepath
 cp -a * %buildroot%{roundcubepath}/
 mkdir -p %buildroot/%_sysconfdir/%name
-cp config/db.inc.php.dist   %buildroot/%{roundcubeconfigpath}/db.inc.php
-cp config/main.inc.php.dist %buildroot/%{roundcubeconfigpath}/main.inc.php
 cp config/* %buildroot/%{roundcubeconfigpath}/
-rm %{buildroot}%{roundcubeconfigpath}/*.dist
+cp %buildroot/%{roundcubeconfigpath}/main.inc.php.dist %buildroot/%{roundcubeconfigpath}/main.inc.php
+cp %buildroot/%{roundcubeconfigpath}/db.inc.php.dist %buildroot/%{roundcubeconfigpath}/db.inc.php
 rm -rf %buildroot%{roundcubepath}/config
 
 # install httpd.conf file and adapt the configuration
@@ -82,7 +85,7 @@ sed -e "s#__ROUNDCUBEPATH__#%{roundcubepath}#g" %{SOURCE2} > %buildroot%{apache_
 
 # install docs
 install -d -m 0755 %buildroot%_defaultdocdir/%name
-for i in CHANGELOG INSTALL UPGRADING LICENSE README ; do
+for i in CHANGELOG INSTALL UPGRADING LICENSE README README.openSUSE; do
     mv -v %{buildroot}%{roundcubepath}/$i %{buildroot}%{_defaultdocdir}/%name/
 done
 
@@ -97,19 +100,25 @@ rm -rf %buildroot
 
 %post
 # enable apache required apache modules
-if [ -x /usr/sbin/a2enmod ]
-then
+if [ -x /usr/sbin/a2enmod ]; then
   a2enmod -q alias || a2enmod alias
   a2enmod -q rewrite || a2enmod rewrite
 fi
+if [  ! -f %{roundcubeconfigpath}/main.inc.php ]; then
+  cp %{roundcubeconfigpath}/main.inc.php.dist %{roundcubeconfigpath}/main.inc.php
+fi
+if [  ! -f %{roundcubeconfigpath}/db.inc.php ]; then
+  cp %{roundcubeconfigpath}/db.inc.php.dist %{roundcubeconfigpath}/db.inc.php
+fi
+exit 0
 
 %files
 %defattr(0644, root, root,0755)
 %doc %_defaultdocdir/%name/
 %dir %{roundcubepath}
 %dir %{roundcubeconfigpath}
-%config(noreplace) %{roundcubeconfigpath}/db.inc.php
-%config(noreplace) %{roundcubeconfigpath}/main.inc.php
+%ghost %config(noreplace) %{roundcubeconfigpath}/db.inc.php
+%ghost %config(noreplace) %{roundcubeconfigpath}/main.inc.php
 %config %{roundcubeconfigpath}/*
 %config %{roundcubeconfigpath}/mimetypes.php
 %config(noreplace) %{apache_sysconfdir}/conf.d/roundcubemail.conf