diff -Pdpru rp-pppoe-3.14.orig/scripts/pppoe-init-suse.in rp-pppoe-3.14/scripts/pppoe-init-suse.in
--- rp-pppoe-3.14.orig/scripts/pppoe-init-suse.in	2020-05-27 03:29:37.000000000 +0300
+++ rp-pppoe-3.14/scripts/pppoe-init-suse.in	2020-05-28 03:46:47.354070399 +0300
@@ -15,53 +15,106 @@
 
 # Modifed to work with SuSE 6.4 linux by Gary Cameron.
 #
-# Source function library.
-#. /etc/rc.d/init.d/functions  # For red hat?
-. /etc/rc.config               # For SuSE, enables setting from /etc/rc.config
+# Modifed and fixed to work with SuSE linux by Anas Nashif <nashif@suse.de>
+
+### BEGIN INIT INFO
+# Provides:          rp-pppoe
+# Required-Start:    $remote_fs $syslog $network $named
+# Required-Stop:     $syslog $remote_fs
+# Default-Start:     3 5
+# Default-Stop:      0 1 2 6
+# Short-Description: Start Roaring Penguin ADSL
+# Description:       Start Roaring Penguin ADSL
+### END INIT INFO
+
+. /etc/rc.status
 
 #Tweak this
 restart_time=120
 
 # From AUTOCONF
 prefix=@prefix@
-exec_prefix=@exec_prefix@
+exec_prefix=${prefix}
 
 # Paths to programs
 START=@sbindir@/pppoe-start
 STOP=@sbindir@/pppoe-stop
 STATUS=@sbindir@/pppoe-status
 
-test "$PPPoE_START" = "yes" || exit 0
+CONFIG=`cat @sbindir@/pppoe-start | grep "^CONFIG" | awk -F"=" '{print $2}'`
+CF_BASE=`basename $CONFIG`
+PIDFILE=`cat $CONFIG | grep "^PIDFILE" | awk -F"=" '{print $2}'`
+PPPOE_PIDFILE=`cat @sbindir@/pppoe-connect | grep "^PPPOE_PIDFILE" | awk -F"=" '{print $2}'`
+PPPD_PIDFILE=`cat @sbindir@/pppoe-connect | grep "^PPPD_PIDFILE" | awk -F"=" '{print $2}'`
+
+# IN: RET
+chk_status(){
+  RES=
+  case $1 in
+    0)	RES=0
+  ;;
+    1)	if [ -e $PPPOE_PIDFILE ] || [ -e $PPPD_PIDFILE ]; then
+		RES=1
+	else
+		RES=3
+	fi 
+  ;;
+  esac
+  return $RES
+}
 
 # The echo return value for success (defined in /etc/rc.config).
-return=$rc_done
 case "$1" in
     start)
-        echo -n "Bringing up PPPoE link"
-        $START  > /dev/null 2>&1 || return=$rc_failed
-        echo -e "$return"
+        echo -n "Bringing up PPPoE link: "
+        $START  > /dev/null 2>&1 
+        # Remember status and be verbose
+        rc_status -v
         ;;
-
     stop)
-        echo -n "Shutting down PPPoE link"
-        $STOP > /dev/null 2>&1 || return=$rc_failed
-        echo -e "$return"
+        echo -n "Shutting down PPPoE link: "
+        $STOP > /dev/null 2>&1
+        # Remember status and be verbose
+        rc_status -v
+        ;;
+    try-restart)
+        ## Stop the service and regardless of whether it was
+        ## running or not, start it again.
+        $0 stop
+        $0 start
+        # Remember status and be quiet
+        rc_status
         ;;
-
     restart)
         $0 stop
         echo "Waiting" $restart_time "seconds for the host to reset itself"
         sleep $restart_time  #Note: Need time for host to reset itself
         $0 start
+        # Remember status and be quiet
+        rc_status
+        ;;
+    reload|force-reload)
+        echo -n "Reload PPPoE link: "
+        rc_failed 5
+        # Remember status and be verbose
+        rc_status -v
         ;;
-
     status)
-        $STATUS
+        echo -n "Checking PPPoE link: "
+        # Return value is slightly different for the status command:
+        # 0 - service up and running
+        # 1 - service dead, but /var/run/  pid  file exists
+        # 2 - service dead, but /var/lock/ lock file exists
+        # 3 - service not running (unused)
+        # 4 - service status unknown :-(
+        # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
+        RET=`$STATUS > /dev/null 2>&1; echo $?`
+        chk_status $RET
+        # Remember status and be verbose
+        rc_status -v
         ;;
-
     *)
-        echo "Usage: pppoe {start|stop|restart|status}"
+        echo "Usage: pppoe {start|stop|restart|status|try-restart}"
         exit 1
 esac
-
-exit 0
+rc_exit