forked from pool/rt2860
76 lines
3.2 KiB
Plaintext
76 lines
3.2 KiB
Plaintext
[1.8.0.0]
|
|
1. Fixed compile error when CARRIER_DETECTION_SUPPORT is enabled.
|
|
2. Add "iwpriv ra0 set CarrierDetect=0(or 1)"
|
|
3. Add new WSC hardware push button function
|
|
4. Add Ad-Hoc to support N rate.
|
|
5. Migrate Mesh supporting to Draft-2.0.
|
|
6. Support WAPI functionality
|
|
7. Fixed suspend/resume error when ra0 down, ra0 up.
|
|
8. Support Linux Kernel 2.6.27
|
|
9. Fixed WPS failed when AP is not in scan table or AP's channel changing after user sets "iwpriv ra0 wsc_start"
|
|
10. Fixed DLS A-MPDU established failed.
|
|
|
|
[1.7.0.0]
|
|
1. Support SIOCSIWGENIE, SIOCGIWGENIE, SIOCSIWMLME, SIOCGIWENCODEEXT, and SIOCSIWPMKSA.
|
|
2. Support IWEVGENIE in iwlist ra0 scan.
|
|
3. Support DLS
|
|
4. Fixed connection failed with Range Maximizer - 515 AP (Marvell Chip) when security is WPAPSK/TKIP.
|
|
5. Fixed length error of RSN/SSN IE for WpaSupplicant.
|
|
6. Fixed WPAPSK rekey problem when A-MSDU is enabled.
|
|
7. Fixed NetworkManager cannot detect ra0 when ra0 is not up.
|
|
8. Add IEEE802.11d Client Mode: None, Flexible, Strcit.
|
|
9. Add Station N only mode. (Only connects to N-AP)
|
|
10. Add Global country domain(ch1-11:active scan, ch12-14 passive scan)
|
|
11. Enhance PCIe advance power saving
|
|
12. Modified iwpriv ra0 get_site_survey: When security of AP is OPEN/WEP or SHARED/WEP, show UNKNOW/WEP in scan list.
|
|
13. When the secondary channel of AP exceeds the country region's range, station will auto fallback to 20MHz. i.e. need both control and secondary channel are both
|
|
in country region's channel list.
|
|
14. Fixed crash in LinkDown when there are >64 APs exists.
|
|
|
|
[V1.6.0.0]
|
|
1. Fixed issue of Radar Channel flag building with HAS_EXT_BUILD_CHANNEL_LIST=n.
|
|
2. Fixed issue of Adhoc-STA would create in radar channel.
|
|
3. Support Linux Kernel 2.6.24
|
|
4. Support SNMP
|
|
5. Support Debug Diagnose
|
|
6. Add Makefile.NonLoadableModule for non-loadable module
|
|
7. Add two ioctl commands to change tx long/short retry limit.
|
|
|
|
[V1.5.0.0]
|
|
1. Add BaSmartHardTransmit mechanism.
|
|
2. Support Linux Kernel 2.6 suspend and resume.
|
|
3. Support extened channel list.
|
|
4. Add "iwconfig rate" setting for legacy rate.
|
|
5. Add make install/uninstall to Makfile.
|
|
6. Fixed issue of showing SNR1 information.
|
|
7. ATE: Add command "iwpriv ra0 set ATELDE2P=1" to overwrite all EEPROM contents from a .bin file.
|
|
8. Change IRQ LOCK to SEM LOCK
|
|
9. Fixed extened channel list checking issue on RT28xx.
|
|
|
|
[V1.4.0.0]]
|
|
1. Fixed "iwconfig ra0 essid"
|
|
2. Send DIS-ASSOC request to AP when ra0 down.
|
|
3. Support 5-GHz band ATE.
|
|
4. Fixed fixed rate issue in N mode and fixed rate ioctl.
|
|
5. Add Legacy Power Saving Mode.
|
|
6. Support custom wireless event.
|
|
|
|
[V1.3.0.0]
|
|
1. Support Monitor Mode with WireShark.(Usage: iwconfig ra0 mode monitor)
|
|
2. Support ATE function for EMI.
|
|
3. Support NetworkManager, wpa_supplicant by using wext.
|
|
|
|
[V1.2.0.0]
|
|
1. Add AP's wireless mode info to iwpriv ra0 get_site_survey.
|
|
2. Modify bitrate info in iwlist ra0 scan.
|
|
3. Fixed compile error in non-DBG mode.
|
|
|
|
[V1.1.0.0]
|
|
1. Fxied iwpriv security setting issue.
|
|
2. Support Big-Endian.
|
|
|
|
[V1.0.0.0]
|
|
1. Driver security support: Open/Shared WEP, WPA-PSK, WPA2-PSK, WPA-NONE.
|
|
2. Support 32/64-bit OS
|
|
3. Support A-MPDU and A-MSDU
|