SHA256
1
0
forked from pool/rtl_433
rtl_433/rtl_433.changes

910 lines
41 KiB
Plaintext

-------------------------------------------------------------------
Fri Aug 30 00:50:20 UTC 2019 - Martin Pluskal <mpluskal@suse.com>
- Use new macro for cmake building
-------------------------------------------------------------------
Thu Aug 29 20:27:03 UTC 2019 - Martin Hauke <mardnh@gmx.de>
- Update to version 19.08+git.20190829:
Highlights:
* Added MQTT output (#1016)
* Added stats reporting (#733)
* Added SoapySDR general keyword settings option, e.g. antenna
* Added new model keys option
* Changed Normalize odd general keys on devices (#1010)
* Changed Use battery_ok instead of battery for newmodel
* Added report model description option (#987)
* Added pulse data text file support (#967)
* Added color to console help output
* Fixed CF32 loader; addeded CS8, CF32 dumper
Changes:
* Added CurrentCost EnviR support (#1115)
* Added ESIC-EMT7170 power meter (#1132)
* Added LaCrosse-TX141Bv3 support (#1134)
* Added channel to inFactory-TH (#1133)
* Added man page rtl_433.1 (#1121)
* Added color to console help output
* Added support for Philips AJ7010 (#1047)
* Added frequency hopping signal support for win32 (#1128)
* Added Holman WS5029 decoder
* Added Acurite Rain 899 support
* Added support for Oregon scientific THGR328N and RTGR328N (#1107) (#1109)
* Added frequency hop on USR1 signal
* Added '-E hop' option
* Added option for multiple hop times
* Added sensor similar to GT-WT-02 (#1080)
* Added Rubicson 48659 Cooking Thermometer
* Added TFA Dostmann 30.3196 decoder (#983)
* Added support for HCS200 KeeLoq encoder (#1081)
* Added channel output to lacrosse_TX141TH_Bv2 (#1097)
* Added IKEA Sparsnäs decoder.
* Added support for Eurochron weather station sensor (#1090)
* Added MQTT topic format strings (#1079)
* Added two EV1527 based sample configurations (#1087)
* Added DirecTV RC66RX Remote Control
* Added support for Ecowitt temperature sensor
* Added Companion WTR001 decoder (#1055)
* Changed Thermopro TP12 also supports TP20 (#1061)
* Added configuration for PIR-EF4 sensor (#1049)
* Added Alecto WS-1200 v1/v2/DCF decoders to Fineoffset (#975)
* Added TS-FT002 decoder (#1015)
* Added Fine Offset WH32B support (#1040)
* Added LaCrosse-WS3600 support, change LaCrosse-WS to LaCrosse-WS2310
* Added LaCrosse WS7000 support (#1029) (#1030)
* Changed Omit humidity on Prologue if invalid
* Added MQTT output (#1016)
* Added stats reporting (#733)
* Added Interface Specification for data output (#827)
* Added checksum to Ambient Weather TX-8300
* Added Interlogix glassbreak subtype
* Added Jansite TPMS support (#1020)
* Added Oregon Scientific RTHN129 support (#941)
* Changed Use battery_ok instead of battery for newmodel
* Changed Update battery_low, temperatureN keys
* Changed Normalize odd general keys on devices (#1010)
* Fixed Efergy-e2 current reading exponent
* Added FS20 remote decoder (#999)
* Added SoapySDR general keyword settings option
* Added option to select antenna on SoapySDR devices (#968)
* Fixed CF32 loader; added CS8, CF32 dumper
* Added ASAN to Debug builds
* Changed tfa_twin_plus_30.3049: Add mic to output
* Added new model keys option
* Enhanced Kedsum, S3318, Esperanza with MIC (#985)
* Added support for XT300/XH300 soil moisture sensor (#946)
* Changed Schrader unit from bar to kPa
* Added report model description option (#987)
* Added native scale for SDRplay
* Added Chungear BCF-0019x2 example conf
* Changed GT-WT-02 to support newer timings; changed model name
* Added pulse data text file support (#967)
* Added Digitech XC0346 support to Fine Offset WH1050 (#922)
* Added bitbuffer NRZI(NRZS/NRZM) decodes
* Added Rosenborg/WH5 quirk to Fineoffset
* Added support for Silverline doorbells (#942)
* Changed TPMS Toyota to match shorter preamble
* Changed TPMS Citroen data readings
* Changed TPMS Renault data readings
* Added Digitech XC-0324 temperature sensor decoder (#849)
* Added sample rate switching
* Added Mongoose
- Remove patch:
* rtl_433-disable-test.diff
-------------------------------------------------------------------
Sat Aug 18 19:15:50 UTC 2018 - mardnh@gmx.de
- Update to version 18.05+git.20180806:
* Clean up copyright notes
* Change flex to more robust opt arg parse
* Fix bitbuffer_parse to be sane about empty row specs
* Tweak timings for Kerui
* Fill id string for Bresser device.
* Add battery event for Kerui
* Update style for chuango
* Update style for akhan
* Update style and add cmds to Kerui
* Update code style for wssensor
* Add Hyundai WS SENZOR (#779)
* Add fix for TEK377E, issue #776
* Fix Makefile devices to match CMakeLists
* Add CS16 input and output (#773)
* Add device: M-Bus (EN 13757-4) - Data Link layer (#768)
* Fix for Autotools
* Rewrite debug_mode to load_mode and dump_mode
* Fix typo
* Fix indents
* Clean up baseband, optimize FM, add baseband-test (#770)
* Rewrite ambient_weather for robustness and style
* Remove some unwanted BITBUF_COLS uses
* Change radiohead to unify the applications
* Fix Sensible Living merge
* Sensible Living protocol added. (#742)
* Fix SOCKET(_TYPE) for syslog
* Win32 syslog client patches (#762)
* Make printout aligned (#761)
* Make the frequency setting clearer. (#760)
* Add real protocol number to startup output (#744)
* Convert intertechno to data_make (#726)
* see #755
* FineOffset WH0530: Add battery low detection, correct rain factor (#765)
* Add prototype for 'nice_freq()' (#759)
* Add a "pretty-printer" of a frequency (#758)
* No "Variable Length Arrays" for MSVC (#755)
* Remove <strings.h> (#756)
* More MSVC fixes (#754)
* [MSVC] patch include/data.h (#753)
* Include <stdlib.h> (#752)
* Add support for Oregon Scientific UVR128 UV sensor (#738)
* Update code style for RadioHead
* DSC Sensors break out status bits
* acurite_986: fix temperature type to enable conversion feature to work
-------------------------------------------------------------------
Fri Jun 01 20:06:21 UTC 2018 - mardnh@gmx.de
- Update to version 18.05+git.20180525:
* New devices: Euroster 3000TX, Elro DB270 (#683)
* Add flex spec for Byron BY doorbells (#686)
* change array separator in csv to ";" otherwise RadioHead ASK output will break csv parsers (#687)
* create flex dev adhoc and enable csv output (#688)
* calc stop_time late; better exit messages (#689)
* add proper reset and gap limit to Quhwa; use repeated rows; add csv output; style update (#691)
* fix short char buffer
* Adding interlogix devices driver (#649)
* fix bitbuffer_extract_bytes clipping unaligned bits
* fix Interlogix; style
* Added decoder for Dish Network UHF Remote 6.3 (#700)
* use actual max protocols
* Update acurite.c (#704)
* Acurite 06045M structured data (data_make) cleanup, decoding improvements. (#707)
* Adjust alarm from 1 second to 3 second
* Acurite 986 convert to JSON/data_make * Add hack from my branch to work around missing bit
* Fix typos/misspellings
* Add conversion hPA/inHG, kPa/PSI (#711)
* Fix acurite raw_str termination
* Touch up waveman code style, add missing time field
* Add PiWM decoding (#724)
* SimpliSafe Sensor (#721)
* SimpliSafe style updates
* Add Pacific PMV-C210 TMPS support (#717)
* Add preamble option to flex decoder
* Make intertechno decoder work with ITT-1500 (#694)
* Convert DSC to structured data (#725)
* Regularize and extend Acurite 6045M comments (#728)
* DSC data_make additions. (#730)
* Indents
* Acurite TXR/6045 fixes
* Acurite cosmetics fixes
-------------------------------------------------------------------
Mon Feb 26 21:15:42 UTC 2018 - mardnh@gmx.de
- Create subpackge for header files
-------------------------------------------------------------------
Thu Feb 15 19:25:35 UTC 2018 - mardnh@gmx.de
- Update to version 0.0.1+git.20180213:
* fix flex options, add gap_limit for PWM
* README.md: Add another Debian dependency (#680)
* README.md: Fix typo (#679)
* README.md: Add build tools to Debian command (#678)
* revert localtime_r to localtime for win32
* disable syslog output on win32
* remove left over xc0348 device
* Fix on_connect signature and topic subscriptions in MQTT examples. (#674)
* refactor hostport_param
* refactor abuf
* allow ipv6 for syslog
* add flex device to Makefile
* refactor print_array_value
* use prettier C99 bool macro
* shuffle functions
* change aux pattern to composition
* remove output_hander_t, printer_ctx indirection
* change indent; consistent style
* adds a remote syslog output
* update readme usage info
* default enable x10_sec, timing doc, style
* Adds x10_sec device for decoding X10 Security RF signals (#671)
* Spelling fix: gague -> gauge (#672)
* fix new_template
* use localtime_r instead of localtime
* reduce false positves with Bresser on LaCrosse TX141TH
* add MIC to bresser
* freshen up template with more examples
* add a flexible general purpose decoder (#647)
* remove PWM_TERNARY, use PWM_PRECISE for sync bits
* change pulse_detect to use pwm_precise for sync bits
* rename CLOCK_BITS to DMC
* change fordremore to proper DMC, the output is vastly different
* change DMC (clock_bits) demod to add rows on symbol errors
* convert Acurite 592TXR from TERNARY to PRECISE
* reduce false positives in Thermopro TP12
* code style for LaCrosse TX141
* convert LaCrosse TX141 from TERNARY to PRECISE
* convert Bresser 3CH from RAW to PRECISE
* convert LaCrosse TX from RAW to PRECISE
* convert Philips Sensor from TERNARY to PRECISE
* convert Calibeur from TERNARY to PRECISE
* convert Acurite 00275rm from TERNARY to PRECISE
* enhance pwm_precise to cover raw and ternary cases
* add sync pulse count to bitbuffer
* fix Lacrosse TX141TH sync rows
* Added device LaCrosse TX141 support to lacrosse_TX141TH_Bv2.c (#670)
* add back C99 with ADD_DEFINITIONS
* C99 compatibility (#667)
* add git version info to usage output if available
* let cmake set C99; CMP0025
* additional build deps (#668)
* wh1080: Fix warning about uninitialized use (#666)
* adding asepc, getkwargs helper
* fold PWM_precise_parameters into r_device
* output pulse_demod_pwm_precise at end of pulses as well
* adapt precise param sync width to us
* use _XOPEN_SOURCE on string.h for strdup
* fix -R 0 fault
* use bitbuffer_clear for bitbuffer_parse
* refactor bitbuffer_parse
* minor
* Doxygen EXTRACT_ALL to show all docs, there isn't any notable exported API yet
* update 1.7 Doxyfile to 1.8
* add Doxygen building to CMake
* cleanup
* parse number suffixes on e.g. frequency, samplerate, duration, hoptime
* relax false positive logic prologue/alecto to allow a single leading pulse
* Fix unit conversions for Acurite 5n1 (#651)
* fix `-d n` parsing
* Add missing brand to OSv1 (#650)
* adding FindGperftools cmake module
* add Profile build type using GPerfTools
* use CMake defaults for optimizations (-O3)
* RTGN129 author name (#646)
* change grab file name to gNNN_FFFM_RRRk.cu8 (#642)
* replace -i <serial> with -d :<serial> (#648)
* Clean up WIN32 include/ifdef (#643)
* fix read-mode buffer size and allocation, s. #641 (#644)
* reduce Alecto/Auriol-v2 false positives in Prologue
* enable pedantic warnings; also on Clang
* pedantic fix: -Wextra-semi
* pedantic fix: replace arithmetic on void* (gnu extension) with sane char* arithmetic; fix function pointer for qsort, bsearch
* adding mic to OS SL109h
* remove false positives with wg-pb12v1, please report samples if WH2, WH5, Telldus are missing messages
* remove debug from wg-pb12v2; add mic to fineoffset
* fix GE Color Effects Remote indent and MAX_PROTOCOLS
* chmod 644 on source files
* add model switch to WH2/WH5/Telldus in fineoffset
* Add support for Telldus variants of fineoffset (#639)
* merge formatting from PR #615
* disable mebus: lacks docs, tests and has false positives
* Esperanza, Kedsum, S3318p: relax reset timing, check sync pulses to remove dups
* fix OOK_PULSE_CLOCK_BITS pulse_tolerance to µs
* fix: require 24 bits data for rain gauge sensors
* Update chuango.c
* Stop after outputting successful event(s)
* Added support to Oregon Scientific RTGN129
* Add device NEXA LMST-606 magnetic sensor
* added unit (Fahrenheit) to output of Ambient Weather Temperature Sensor
* Update rtl_433.h
* fixed compile time warnings (formatting related)
* change PWM_Precise_Parameters pulse_tolerance to use us instead of samples
* fixing schraeder data types
* Remove unintended spurious white spaces
* Add another schrader TPMS support (corrections)
* Add another schrader TPMS support
* remove spurious if-statement
* Specify device to use via serial number
* automatically use first available dongle
* define _GNU_SOURCE for strdup
* Add support for the Thermopro TP-12. This is based heavily on the code for the Thermopro TP-11, and the modulation is compatible, but the bit layout is fairly different and there are more sensors, so I've made this a separate device.
* Addressed code review by @zuckschwerdt
* Device handler for GE Color Effects remote control Fixes #569
-------------------------------------------------------------------
Wed Nov 01 19:58:05 UTC 2017 - mardnh@gmx.de
- Update to version 0.0.1+git.20171101:
* Add support for Philips outdoor temperature sensor
* move fprintf call when timer expires
* remove check for DEFAULT_HOP_EVENTS
* fix edge-case where bytes_to_read is equal to length of bytes read
* Fix output formatting
* Added support for Ford car remote.
* Removed unused code and variables.
* Added a ford car remote decoder for the Fiesta and CMAX. device id is a rolling id number that seems to have approx 64 variations. The meaning of the code fields has not been determined.
* Fixed output formatting for JSON and csv
* Added decoding of X10 CR12A ON/OFF remote commands
* Add support for FT-004-B
* Make LaCrosse TX141TH sensors return temperature_C so that they are more consistent with other temperature sensors (#606)
* Acurite Rain Gague emit structured data
* shortend model string to Inovalley kw9015b
* added json-support and description for TFA 30.3161 rain sensor
* Fixed do_build.sh: forgot to do 'cd ..' before cloning rtl_433_tests.git
* Fixed do_build.sh, .travis.yml trying to run 'make test'
* Added tests from rtl_433_tests.git repo
* Fixed do_build.sh: don't 'make installe'
* Fixed .travis.yml: 'sudo: required', 'dist: trusty'
* Fixed .travis.yml: added sudo, added apt.sources
* Fixed permissions on do_build.sh
* Added draft of .travis.yml, do_build.sh
* Use default number of buffers to fix crash of two rtl_433 instances
* don't restart the timer if we are aborting anyway; cancel timer on rtlsdr_cancel_async
* fix unknown `uint` type; whitespace fixes
* add merbanan changes
* add suggested optimisation
* suggested changes
* remove test
* add infactory sensor
* bitbuffer: Handle row overflow a bit more gracefully
* pulse_analyzer: Add detection of PWM with multiple packages
* explaining dipswitch 2 meaning
* message validation fix
* shortening output
* changes after pull request
* Switched to new data API
* adding Renault TPMS sensor
* adding Ford TPMS sensor
* Add option to verify simulated decoding of raw data
* reduce false positives by rejecting 0x000000 / 0xffffff
* adding Toyota TPMS sensor
* reduce false positives, require at least 5 repeats
-------------------------------------------------------------------
Sat Jul 08 09:02:24 UTC 2017 - mardnh@gmx.de
- Update to version 0.0.1+git.20170708:
* prevent bad messages of all 1 that falsely check ok with crc.
* adding IBIS beacon
* fix Company name, output flags and tire pressure/temperature
* proper units for pressure, units for power, fix OS output fields
* adding Oil Ultrasonic Standard protocol
* hop interval param added (multiple frequencies)
* updated README.md
* typo fix
* pipe symbol with HTML code
* Update README.md
* Added data struct for efergye2 (#540)
* fix fabsf() in integer context (#551)
* adding Citroen TPMS device
* bugfix, bitbuffer needs to be initialized
* adding Oil Ultrasonic STANDARD using ASK on 915MHz
* Honda remote: fix an out of bounds array access
* Removed use of pow() (#557)
* Possible bugfix for issue #136
* Update .gitignore
* Fix hex output padding for unit ID field for lightwaverf.
* Thermopro TP-11.
* Move TP-11 to the end.
* Thermopro TP-11 changes: - exit early if not enough matching rows are found - simplify bits_per_row check - local_time_str happens after decoding data
* Fix sign error.
* Variable declarations are at the top of the function.
* Solight TE44 wireless thermometer
* Fix spelling in documentation
* adding Wireless Smoke and Heat Detector GS 558
* adding Generic off-brand wireless motion sensor and alarm system
* remove false positives from Esperanza/Kedsum
* replace binary literals with hex
* fix misc typos and reduce efergy false positives
* allow WH2 to miss the first sync bit for WH5 support
* reject false positive and fix wrong field index and minimum bit count
* fix compiler warnings; possible undef bug; signed/unsigned
-------------------------------------------------------------------
Mon May 15 20:26:05 UTC 2017 - mardnh@gmx.de
- Update to version 0.0.1+git.20170515:
* Add files via upload
* Add support for Fine Offset WH3080 weather station
* Updated "quadrant" code for WGR968
* Restored 'static' variables
* Bump MAX_PROTOCOLS to 78
* cleanup: replacing broken sprintf, removing debug code
* fix short buffer: sprintf's output is always null-terminated
* adding output redirection to files
* Sensor GT-WT-02 Change REDME.md
* fix sample_file_pos to actually count seconds, each sample is 16 bits (I+Q uint8's)
* change data output fields to usual order
* add missing "model" data output
* add time to data output
* Add support for Vaillant calorMatic 340f (VRT 340f) wireless central ceating control (868MHz)
* adds a watchdog timer to async callback, abort if async events stop arriving
* improving compatibility for Renkforce DM-7511
* Vaillant_vrt340f.c: Fix indentation, only whitespace changes
* remove synthetic fahrenheit output. use `-C customary` to convert.
* harmonize device data output to model instead of device or make, and crc instead of checksum
* changing "crc", "checksum" to "mic"
* delete stray trailing whitespace
* normalize indentation to 4 spaces or one tab, depending on prevalence in each file
* Update rtl_433.h
-------------------------------------------------------------------
Sat Apr 15 22:31:43 UTC 2017 - mardnh@gmx.de
- Reenable parallel build
-------------------------------------------------------------------
Thu Apr 13 19:22:51 UTC 2017 - mardnh@gmx.de
- Update to version 0.0.1+git.20170409:
* Include humidity field in CSV format for TX29DHT temperature and humidity sensor. (#486)
* Fix parse error on ARM compiling with GCC due to lack of parens. (#490)
* Don't convert channel 4 to 3 for the sensor Oregon THGR810 (#489)
* Fine Offset W25 Temperature/Humidity/Pressure sensor (#492)
* Device for cheap probes where the PCB is marked WG-PB12V1.
* Revert "Update pulse_detect.c" (#493)
* MQTT: Add example to README and Python test client (#495)
* Pulse Analyzer: Add 'Include only' mode (#497)
* Fine Offset WH0530: Add new device
* DSC: Make less noisy
* pulse_demod: Make pwm_precise resilient to short spurious pulses
* Acurite 6045, correct temperature decoding * Reduce Msg Type (status bits) to 2 remaining bits. * Remove possible lightning stats/flag bits from distance * output lightning status/flag bits separately for now * Understanding of status/message type bits still a WIP.
* Acurite 06045 add docs, refactor decode out of txr_callback
* acurite 6045, remove unnecessary variable
* Added code for differing impules to KWH values
* LaCrosse TX6/7 cleanup
* LaCrosse TX6/7 reindent with consistent 4 column spacing
* Fix #503
* Update util.c
* Pull Request Changes ---
* FineOffset_WH25: Add debug printout
* FineOffset_WH25: Correct decoding of Temperature and ID
* FineOffset_WH0530: Fix bug in ID decode
* FineOffset_WH25: Additional bitsum check + minor fixes
* ELV WS2000: Make it somewhat work...
* Corrected conflict in MAX_PROTOCOLS.
* erroneous entry in src/Makefile.am
-------------------------------------------------------------------
Thu Feb 02 10:42:51 UTC 2017 - mardnh@gmx.de
- Update to version 0.0.1.git1486029687.074cc2f:
* Reverse some more stray changes
* Ensure analyzer works with auto level as default
* Various documentation fixes for auto level
* Acurite 6045 lightning prelim. and 609 cleanup.
* WH1050 weather station based on WH1080 module.
* Honeywell/Ademco Door/Window Security Sensor driver
* Honeywell/Ademco Door/Window Security Sensor driver
* Honeywell/Ademco Door/Window Security Sensor driver
* Honeywell/Ademco Door/Window Security Sensor driver
* Honeywell/Ademco Door/Window Security Sensor driver
* Honeywell/Ademco Door/Window Security Sensor driver
* Honeywell/Ademco Door/Window Security Sensor driver
* Honeywell/Ademco Door/Window Security Sensor driver
* added json/kv capbilities to Acurite tower sensor
* added battery status as OK or LOW
* fixes for upstream
* fix indent
* Update README.md
* Added more installation step detail and troubleshooting section.
* Correct negative temperatures
* Danfoss CFR: Initial decoding attempt
* Danfoss: Output data correctly
* Danfoss: Enable driver by default
* Danfoss: Add proper header search and make decoding byte based
* Danfoss: Add CRC check. Remove raw printout.
* Danfoss: Reverse engineered unknown nibble :-)
* Danfoss: Minor cleanup and fix debug print
* add maverick et73x BBQ sensor
* Add crc json tag and cvs output
* Add crc json tag
* Update brennstuhl_rcs_2044.c
* Spelling correction (protcols -> protocols)
* Improved hideki.c to detect data from the wind/temperature and the rain sensor. Changed pulse_demod_clock_bits to allow a missing short gap at the end of the message which is needed for the new sensor types.
* Increase number of protocols to 70
* Update pulse_detect.c
* Update acurite.c
* Segfault on Owl CM160
* Added support for RF-tech 433 remote temperature sensor.
* Add rftech.c to Makefile.am to support configure/automake.
* Added support for LaCrosse temperature/humidity sensor TX141TH-Bv2
* Minor cosmetic changes
* Implemented recent changes suggested by @merbanan.
* move to new internal data format on acurite5n1
* remove old acurite5n1 decoder, now uses acurite_txr
* normalize temperature key
* acurite5n1 battery status
* correct acurite5n1 wind speed formula
* add raw msg debug output for acurite5n1
* acurite5n1: fix battery status
* Stop akhan-100F14 catching things that don't belong to it
* Add missing return 1.
* don't mess up device ordering
* remove old, incorrect wind direction mapping
* output raw rain counter values, use define for msg type
* move all units to native customary/US
* remove another unused function
* Removed signal quality output
* acurite 5n1: output message sequence number
* Add protocol definition for oregon scientific THN129 temp only sensor. (#469)
* Support for Acurite 00275rm and 00276rm sensors (#467)
* Fixed bug in CM160 (#474)
* devices: mebus: Use data API for results (#475)
* identify F007TH with both 0000000000010100 and 1111111111010100 (#481)
* Add support for BTHGN129 (#483)
* LaCrosse TX29-IT / TX35DTH-IT weather sensor (#479)
* fix typo error (#484)
* WH1050 weather station - remove unused fields from csv format. (#485)
-------------------------------------------------------------------
Mon Sep 19 18:13:46 UTC 2016 - mardnh@gmx.de
- Update to version 0.0.1.git1474227546.2d7072a:
* Adding support for the Bresser 3CH type sensor
* Disable acurite rain gauge due to false positive with oregon scientific v1
* add -T option to set run duration
* Fixed generic_remote to utilized data_acquired_handler to support json output. Not perfectly indented, but works.
* use binary mode to open file - fixes decoding on windows
* Improved datetime/weather signal type detection.
* Fix incorrect handling of negative temperatures in ambient_weather.c (#376)
* missing backtick in readme.md, now in LF (#361)
* New Springfield Temperature and Soil Moisture decoding (#378)
* introduce functionality to decode the Oregon Scientific SL109H Remote Thermal Hygro Sensor (#368)
* Added data output (for json/csv/etc.) (#380)
* Acurite 606TX Sensor Support (#382)
* Cleanup of Acurite 606TX code that should have been done before (#383)
* add TFA pool thermometer support (#386)
* Enabled low battery detection on FineOffset WH1080 (#387)
* Add support for Kedsum Temperature/Humidity sensor (#389)
* added support for blyss dc5-uk-wh (#391)
* Add FSK_PULSE_MANCHESTER_ZEROBIT
* Add initial Schrader TPMS decoder
* Better Schraeder TPMS payload meaning
* Add Schreader TPMS crc calculation
* Add LightwaveRF initial driver (#394)
* Added Steelmate TPMS support (#396)
* Fix json output and minor rearrangement of code
* Add template decoder skeleton
* Add initial Elro DB286A support (#398)
* Elro DB286A: Correct id_string array length (#399)
* Updated README for new efergy_optical sensor and missing recent devices.
* Add CRC16-CCITT function
* Change to new output system
* Add brand parameter to data output format
* Add sensor WGR968 parser support
* Add Handling of error packet format
* Smell and Fix some bad code
* Changed CRC calculation to use new function in util.h no longer using lib_crc
* added file output support and changed energy to power. only output crc values when using -D argument.
* Only output crc when using -D argument
* I have kept the crc calculation to be the first 10 bytes. Bytes 11 and 12 are the CRC16_CCITT. The only puzzle left is why does the last byte does as it sometimes change to 80.
* Efergy Optical device added. Multiple changes to combine several files into one commit.
* Removing lib_crc files
* efergy_optical with CRC checks (#400)
* Honda Key Remote
* formatting changes
* Fix review errors,using Kdiff3 to compare the code
* Fix build
* Honda remote key fob, decodes which button has been pressed.
* Honda Keyfob changes
* Added Honda Remote decoder.
* Added Honda Remote
* Fixed to include Honda remote any my deletion of the README.md when trying to fix git conflicts.
* Changed author name at the top of the file, removed fprintf that was not behind if debug statement. Added a validater to check that number of bits are 386.
* Changed and fixed validation code to suit varying bits per row. Lock command has 394 bits whereas other commands only has 386 bits per row. (#405)
* Add THN802 and PCR800a to oregonscientific.c (#410)
* unbreak the build (#411)
* add battery status (low or ok) to F007TH ambient weather devices (#414)
* Add support for another Fine Offset sensor
* Convert Acurite "TH" (609TXC) to use data_make * Existing Acurite "TH" sensor now labeled as 609TXC * Use data_make() for JSON, CSV, KV output * minor code cleanup/reorg
* Add RadioHead ASK device
* Add option to register all devices
* Fix MAX_PROTOCOLS when enabling all devices
* acurite: disable all old api devices by default
* ambient_weather: fprintf cleanup
* brennstuhl_rcs_2044: disable all old api devices by default
* cardin: disable all old api devices by default
* danfoss: disable all old api devices by default
* dsc: disable all old api devices by default
* ec3k: disable all old api devices by default
* efergy_e2_classic: disable all old api devices by default
* elv: disable all old api devices by default
* gt_wt_02: disable all old api devices by default
* inovalley-kw9015b: disable all old api devices by default
* intertechno: disable all old api devices by default
* lacrosse: fprintf cleanup
* lacrossews: fprintf cleanup
* lightwave_rf: disable all old api devices by default
* mebus: disable all old api devices by default
* new_template: fprintf cleanup
* silvercrest: disable all old api devices by default
* steffen: disable all old api devices by default
* valeo: disable all old api devices by default
* x10_rf: disable all old api devices by default
* Use built in CRC functions
* Fix indent (RH ASK)
* Declare variables at the begining (RH ASK)
* Add CRC=OK (see #416) & fix syntax error (RH ASK)
* Fix debug output (RH ASK)
* fprintf fixup
* Add device debug output
* Added support for Kerui PIR sensor
* Fixes
* Cleanup related to devices disabled by default.
* new_template rework
* Make auto level limit the default
-------------------------------------------------------------------
Sun Mar 27 19:58:00 UTC 2016 - mardnh@gmx.de
- Update to version 0.0.1.git1459106482.900fca7:
+ use uintptr_t instead of unsigned long - fixes build error on win64
+ fix: change doc comments from "samples" to "us"
+ clean up casts regarding C Integer Promotions
+ Oregon Scientific V1 Decoding
+ add -U option to print timestamps in UTC
+ Support for Proove
+ Adjust pulse_tolerance to get all sensors to work
+ Update calibeur rf104 to new data api
+ add missing usage documentation for -n parameter: number of samples to read before quitting
+ add -T option to set run duration
+ Prevent crash when no output file is given with `-S`
+ Fineoffset: Fix key/value printout
+ pulse_analyzer: Add PCM detection
+ Revert "add -T option to set run duration"
+ Calibeur: Fix key/value printout
+ pulse_demod_osv1: Only print preamble info when debugging
+ Fix https://github.com/merbanan/rtl_433/issues/347
+ use uintptr_t instead of unsigned long for the remaining devices
+ mingw32 does not have setenv
+ Remove spurious execute permission from README.md
-------------------------------------------------------------------
Fri Mar 11 11:52:30 UTC 2016 - mardnh@gmx.de
- Update to version 0.0.1.git1457694384.7ab14a4:
+ Added support for Fine Offset WH1080 weather station. Merging with Digitech XC0348 (it's a rebranded WH1080).
+ Adding support for Fine Offset WH1080.
+ Update fineoffset_wh1080.c
+ Added support for Fine Offset WH1080
+ Add remote control on chip HT680
+ Rethinking algorithm
+ fix decoders for WGR800 & THGR810 add decoder for PCR800
+ adding a bitbuffer_find_repeated_row() with examples how it simplifies device code
+ code cleanup
+ starting to migrate to data_make
+ only try the crc if the packet would match
+ adding battery indicator for Nexus
+ add labels for ambient_weather.c to match oregon_scientific.c printout
+ Update README.md
+ Added tristate coding.
+ Correction data types in bitbuffer_find_repeated_row()
+ new feature: allow multiple outputs (WIP)
+ Decode device id from current_cost, and support more devices
+ Add support for Conrad S3318P
+ s3318p: use native temperature format
+ Add support for Conrad S3318P
+ also switch the labels on output conversion
+ Spurious output for debug mode
+ Remove some compiler warnings
+ fix wind direction nibble extract for WGR800
+ Remove some compiler warnings
+ Remove some compiler warnings
+ fix off-by-one and make the null explicit
+ LaCrosse WS-2310 json output
+ Fixed WS-2310 json gust_speed to gust_speed_ms
+ Fix some memory leaks
+ TFA Twin Plus 30.3049 json support
+ Output less decimal places to get rid of bogus digits
+ Update fineoffset_wh1080.c
+ Switched to new data API
+ Update generic_temperature_sensor.c
+ KlikAanKlikUit json support
+ Added data labels for KlikAanKlikUit output
+ Added Akhan 100F14 RKE system
+ Updated akhan_100F14 message passing
+ Update CM180 Energy Sensor code - Add Checksum and new output system format
+ Many sensor required a larger pulse tolerance
+ Add Quhwa doorbell support
+ Clearer code
+ Add support for Quhwa doorbell
+ Support for Quhwa doorbell
+ data_make output for chuango
+ Update device support
+ add missing quhwa.c reference
-------------------------------------------------------------------
Thu Feb 04 11:09:38 UTC 2016 - mardnh@gmx.de
- Update to version 0.0.0.git1454367220.e7bc33d:
+ Auto level: Increase sensitivity to low signals
+ FSK: Change FM demodulation to use integer atan2()
+ Pulse_detect: Increase maximum number of pulses
+ FSK: refactor FSK into own function for sanity
+ Auto level: Make OOK level estimators a bit slower
+ add a converter for cf32 (gnuradio output format)
+ Convert Alecto to Pulse decoder
+ Convert Inovalley to Pulse decoder
+ Convert Nexus to Pulse decoder
+ Convert Generic temperature sensor to Pulse decoder
+ Convert Steffen to Pulse decoder
+ Convert Mebus to Pulse decoder
+ Convert Intertechno to Pulse Decoder
+ Convert Newkaku / KlikAanKlikUit to Pulse decoder
+ Convert Acurite to Pulse decoder
+ Convert ELV to Pulse decoder
+ Remove last sample based decoder OOK_PWM_D
+ Remove OOK_PWM_D: Clean-up header
+ Fix: Segmentation Fault in cf32 file support
+ Update Wiki with new options
+ only treat samples as cf32 when mode==3
+ minor changes to support (cross-)compilation with MinGW
+ newkaku: support APA3-1500R
+ remove superfluous prototype
+ fix loop syntax
+ ignore buffers of all zeros.
+ rewrite LaCrosse TX output to data fields
+ adding data_make for humidity
+ typo
+ fix: broken bit operation
+ Make quiet mode output at least test file name
+ FSK: Change to F1/F2 estimation instead of F1/Fdelta
+ emonTx: Add stub driver
+ FSK: Increase initial frequency threshold
+ Change pulse data from unsigned to int to avoid undefined behaviour
+ fix limits for decoder
+ [xc0348] Add CRC validation
+ [xc0348] Don't filter on device id
+ [xc0348] Fix temperature (top nibble doesn't belong)
+ Include stdio for FILE
+ [xc0348] Add json output
+ [xc0348] Add csv fields
+ FSK: Fix data is not cleared at End Of Package
+ FSK: Fix for handling pulse overflow correctly
+ new command line option `-C native|si|customary` that hooks into `data_acquired_handler` and if `si` and type is DATA_DOUBLE and key is temperature_C then celsius2fahrenheit, if `customary` and type is DATA_DOUBLE and key is temperature_F then fahrenheit2celsius. Also if there is a FORMAT the last character "C" / "F" will be switched accordingly.
+ Emontx: Correct for sample frequency of 2.5 MHz
+ FSK: Rework to make pulse polarity absolute (pulse = high frequency)
+ bitbuffer: Add function to invert bits
+ current_cost: Invert bits to compensate for absolute FSK
+ FSK: correct comment
+ FSK: Fix slow estimation at initial frequency
+ Convert decoder limits to float instead of int, to allow more precision
+ elv: Fix precision of bit limits
+ rubicson: Fix precision of bit limits
+ Switch protocol decoder limits to µs instead of "samples at 250000Hz"
+ ec3k: Fix precision of bit limits
+ valeo: Fix precision of bit limits
+ dsc: Fix precision of bit limits
+ current_cost: Fix precision of bit limits
+ Add bitbuffer_extract_bytes() function for accessing unaligned data
+ Add crc16() function
+ Finish implementing emontx driver
+ Change bit limits in r_device structure to float too
+ Pulse detect: Make low level (noise) estimator even slower
+ Pulse detect: supress spurious short gaps
+ Pulse detect: Minor renaming for consistency
+ Pulse analyzer: Print absolute timing
+ Pulse analyzer: Print FSK frequencies
+ Pulse analyzer: Print OOK carrier frequency
+ Migrate fineoffset to new data format and add support for TFA 30.3157 Temperature sensor
+ Fix building with autotools
+ Migrate nexus to new data format and add support for Technoline TX 9116 Temperature sensor
+ fineoffset: fix typo (unbreak humidity sensor)
+ fix: missing NULL terminator
+ fix: use fabsf() instead of abs()
+ emontx: Increase size of words[] array for endianness conversion
+ alecto: only accept 36 bit packets
+ rubicson: only accept 36 bit packets
+ oil_watchman: Return events count
+ emontx: Return events count
+ rubicson: switch to new data api
+ change output of -F kv to resemble the custom fprintf output of the decoders
- add patch rtl_433-disable-test.diff to disable build-time-tests for now
-------------------------------------------------------------------
Sun Jan 03 22:29:55 UTC 2016 - mardnh@gmx.de
- Update to version 0.0.0.git1450346637.879b467:
+ Add support for new demodulation
+ Add support for WT450 devices
+ Fix automake builds Update source file list and set compiler in C99 mode
+ rubicson: implement crc and other parameters
+ nexus: clean up the nexus protocol
+ WT450: Better packet detection, battery indicator
+ WT450: Add missing the supported device label in README file.
+ New Lacrosse Weather Station Decoding
+ Added Esperanza EWS
+ LaCrosse Weather Station WS-2310TWC changes
+ Updated decoding of Lacrosse Weather Station
+ DSC Security Contact added CRC-8 calc/check * Added "little-endian" CRC-8 calculation * Moved reverse8() to util.c * Quieted WT450 callback false positive messages
+ Updated crc8 to take initial CRC value as a parameter
+ Read data from stdin with '-'
+ Added quiet mode (-q) to suppress non-data related messages
+ Lacrosse Weather Station Decoding cleanup
+ Added missing wt450.c for autoconf compile
+ Minor documentation update
+ Include the last sample when saving samples between filter runs
+ Share memory between fm buffer and temporary buffer
+ Add support for Efergy e2 classic
+ Remove unused command line argument 'c' (used to be decimation level)
+ Only allocate synchronous read buffer if synchronous reads are used
+ WT450: Fix parity computation, error messages only in debug mode
+ add Inovalley kw9015b rain and temperature weather station
+ add new noname wireless wheather station
+ fix makefile.am
+ change r_device->name from ""KW9015B Transmitter" to "Inovalley kw9015b rain and Temperature weather station"
+ rename source / callback generic_temperature_sensor
+ rename r_device->name from "RF Wireless Temp Transmitter" to "Generic temperature sensor 1"
+ Acurite 592TXR Temperature/Humidity Sensor
+ Acurite 592TXR Temperature/Humidity Sensor
+ Updated README.md with new device numbers
+ Acurite 986 Refrig/Freezer Temp initial support
+ Acurite 986, add CRC check, fix negative values
+ Acurite 986 low battery detection
+ Inovalley kw9015b : fix negative temperature
+ General structural data support for generating (ie.) JSON
+ Generic temperature sensor 1 : fix negative temperature
+ Add support for RTGN318
+ Correct indentation
+ data: provide a key-value-printer
+ data: added formatting support
+ rtl_433: added JSON support
+ wt450: use JSON output instead of fprintf
+ data: introduce auxiliary data as an argument
+ data: only format key-value-format, not JSON
+ data: added CSV support
+ rtl_433: added CSV support. Requires driver support.
+ wt450: added CSV support (provide .fields)
+ waveman: added structured data support
+ Fix compilation with autotools
+ util: Make comment consistent
+ util: Fix mismatched comment
+ ambient: Migrate to using common method for output
+ Updated README.md
+ Migrate "prologue" to new output handler
+ Prevent data files from being overwritten
+ README.md documentation updates
+ README.md space to fab fix for consitency * fix table markdown typo
+ waveman: added missing comma to fix CSV output
+ data: fixed the filtering of CSV fields
+ Convert Waveman to pulse decoder
+ Changed acurite 5n1 to use pulse demodulator
+ Convert Silvercrest to use pulse demodulator
+ Remove pwm_p_decode() and OOK_PWM_P
+ Convert from GNU to C99 syntax
+ Update alecto driver to new "data" format
+ Update oregon_scientific driver to new "data"
+ Fix indentation
+ Fix missing comma
+ Add Hideki TS04 sensors
+ Support framed FSK Manchester decoding compatible with Si4320/RFM01
+ Add Watchman Sonic ultrasonic oil tank monitor
+ Add heuristic for detecting RFM01-framed FSK
+ hideki: Remove overzealous warning about invalid parity
+ Add bitbuffer_search() and bitbuffer_manchester_decode() functions
+ Convert oil_watchman to bitbuffer_search() + bitbuffer_manchester_decode()
+ Revert "Support framed FSK Manchester decoding compatible with Si4320/RFM01"
+ Add Watchman to readme
+ Add CurrentCost TX device
+ Fix indent + TODO (minor for CurrentCost sensor)
+ Fix negatif temp value for Hideki TS04
+ Use constant to define and check OS (v2) sensor_id
+ Fix channel error with some OS devices
+ Do not require first byte of Watchman packets to be 0x28
+ Update Readme.md
+ Sync usage messages and README.md
+ README improvements, added typical command line * rtl_433: better description of ppm error option
+ Added -W to overwrite files
+ Added -W to README.md
+ Auto level - initial implementation
+ Auto level - suppress spurious initial pulses
+ FSK spurious short pulse suppression
+ Auto level - print level in analyzer
+ Fix to read complete file
+ Pass 0 into local_time_str() for current time instead of using time()
+ When reading sample files, make local_time_str() show offset not time of day
+ Add temperature output in °C to Watchman decode
+ Auto level - minor fixes
+ Improve comment about level estimates
+ Fix automake build
+ Sort source file lists in CMakeLists.txt and Makefile.am
-------------------------------------------------------------------
Sun Sep 27 18:08:03 UTC 2015 - mardnh@gmx.de
- initial package