s390-tools/vmlogrdr.service.suse

[Unit]
Description=System startup script for the Linux - z/VM Log reader
After=network-online.target remote-fs.target 
Wants=network-online.target remote-fs.target
ConditionPathExists=!/dev/vmlogrdr_LOGREC

[Service]
Type=oneshot
RemainAfterExit=yes

ExecStart=/sbin/modprobe vmlogrdr
ExecStop=/sbin/modprobe -r vmlogrdr

[Install]
WantedBy=default.target
Accepting request 563489 from home:markkp:branches:Base:System - Converted the following SysV init scripts to systemd unit files and scripts (bsc#1050786): * appldata * hsnc * vmlogrdr * xpram OBS-URL: https://build.opensuse.org/request/show/563489 OBS-URL: https://build.opensuse.org/package/show/Base:System/s390-tools?expand=0&rev=43 2018-01-11 01:30:11 +01:00			`[Unit]`
			`Description=System startup script for the Linux - z/VM Log reader`
Accepting request 695825 from Base:System Revert back to revision # 79. OBS-URL: https://build.opensuse.org/request/show/695825 OBS-URL: https://build.opensuse.org/package/show/Base:System/s390-tools?expand=0&rev=82 2019-04-18 20:16:03 +02:00			`After=network-online.target remote-fs.target`
Accepting request 563489 from home:markkp:branches:Base:System - Converted the following SysV init scripts to systemd unit files and scripts (bsc#1050786): * appldata * hsnc * vmlogrdr * xpram OBS-URL: https://build.opensuse.org/request/show/563489 OBS-URL: https://build.opensuse.org/package/show/Base:System/s390-tools?expand=0&rev=43 2018-01-11 01:30:11 +01:00			`Wants=network-online.target remote-fs.target`
			`ConditionPathExists=!/dev/vmlogrdr_LOGREC`

			`[Service]`
			`Type=oneshot`
			`RemainAfterExit=yes`

Accepting request 1041153 from home:markkp:branches:Base:System - Made extensive changes to the spec file to accomodate building this package on both openSUSE, which has implemented the "usrmerge" project, and SLES, which has not. This was accomplished by checking the usrmerged variable, and setting the value of the _mysbindir variable, accordingly. The files identified in the two versions. One for SLES, and one for openSUSE, with either ".suse" or ".opensuse" appended to the file name. The appropriate SOURCE variable is selected based on the usrmerged variable, and installed with the ".suse" or ".opensuse" suffix stripped from the name. * 59-graf.rules * dasd_configure * dasd_reload * detach_disks.sh * iucv_configure * killcdl * mkdump.pl * README.SUSE * s390-tools-sles12-update-by_id-links-on-change-and-add-action.patch * virtsetup.sh * vmlogrdr.service - Updated to version 2.24.0 (jsc#PED-627) * __v2.24.0 (2022-11-09)__ For Linux kernel version: 6.0 Add new tools / libraries: - Provide config files for checkpatch, codespell, and clang-format Changes of existing tools: - dbginfo.sh: Collect log from various distro tools (YaST, DNF, Anaconda) - dbginfo.sh: add Kubernetes data collection - libutil: Introduce util_lockfile - zdev: Add site-aware device configuration - zdump: Add support to read Protected Virtualization dumps - zipl/boot: Add secure boot trailer Bug Fixes: - ap_tools/ap-check: Reject start for control domains without usage - cpumf/lshwc: Fix incremented counter output - cpumf/pai: Fix core dump when summary flag set - dbginfo.sh: Ensure compatibility with /bin/dash shell - dbginfo.sh: Save dbginfo.sh version to dbginfo.log - zipl/src/zipl_helper.device-mapper: Fix bug in error path * __v2.23.0 (2022-08-18)__ For Linux kernel version: 5.19 Changes of existing tools: - Makefile: use common Make definition for DRACUTDIR - Makefile: use common Make definition for UDEVDIR and UDEVRULESDIR - cpacfstats: Add PAI and hotplug support - cpumf/pai: Omit file write progress information - dbginfo.sh: Get more details on lspci command - dumpconf: Prevent running the service in containers - libcpumf: Detect PMU named pai_ext - pvattest: Improve error reporting and logging - zdev: Add some --type ap examples to manpages - zkey: Use default benchmarked Argon2i with LUKS2 Bug Fixes: - dbginfo.sh: Fix accidental ftrace buffer shrinkage/free - genprotimg: Fix BIO_reset() returncode handling - libpv: Fix dependency checking - pvattest: Fix dependency checking - zipl: Fix segmentation fault when no parmline is provided * __v2.22.0 (2022-06-20)__ For Linux kernel version: 5.18 Add new tools / libraries: - ap_tools: Introduce ap_tools and the ap-check tool - cpumf/pai: Add Processor Activity Instrumentation tool - libpv: New library for PV tools - pvattest: Add new tool to create, perform, and verify attestation measurements - zipl/zdump: Add Next Gen Dump (NGDump) support Changes of existing tools: - Move man pages to System commands section (lscpumf, lshwc, pai, dbginfo.sh, zfcpdbf, zipl-switch-to-blscfg) - README.md: Add 70-chreipl-fcp-mpath.rules to the list of udev rule descriptions - Remove SysV related daemon scripts (cpacfstatsd, cpuplugd, mon_statd) - genprotimg: Move man page to section 1 for user commands - hyptop: increase initial update interval - libseckey: Adapt keymgmt_match() implementation to OpenSSL - libutil: Add util_exit_code - libutil: Introduce util_udev - zdev: Introduce the ap device type - zipl-editenv: Add zIPL multienvironment support - zipl: Implement sorting BLS entries by versions - zkey: Add initramfs hook Bug Fixes: - cmsfs-fuse: Fix enabling of hard_remove option - s390-tools: Fix typos that were detected by lintian as 'typo-in-manual-page' - zkey-kmip: Fix possible use after free - zkey: Fix EP11 host library version checking - zkey_kmip: Setup ext-lib once the APQNs have been configured * __v2.21.0 (2022-04-20)__ For Linux kernel version: 5.17 Add new tools / libraries: - libcpumf: Create library libcpumf for CPU Measurement functions Changes of existing tools: - chreipl-fcp-mpath: bundle a pre-cooked version of the manpage for build environments without access to `pandoc` - dbginfo.sh: Add multipath info to map paths to FC addressing and prio group - dbginfo.sh: Collect config files of systemd-modules-load.service - dbginfo.sh: Sort list of environment variables for readability - dbginfo.sh: Replace "which" by builtin command "type" - dbginfo.sh: Rework script formatting (indents, order) - dbginfo.sh: Update sysfs collection (excludes, messages) - genprotimg: Add Protected Virtualization (PV) dump support - genprotimg: Remove DigiCert root CA pinning - lszcrypt: Add CEX8S support - zcryptctl: Add control domain handling - zcryptstats: Add CEX8 support - zipl: Allow optional entries that are left out when files are missing - zipl: make IPL sections defined with BLS to inherit a target field - zpcictl: Add option to trigger firmware reset Bug Fixes: - cpictl: Handle excessive kernel version numbers - dbginfo.sh: Collect all places where modprobe.d config files could exist - fdasd: Fix endless menu loop on EOF - zdump/dfi: Fix segfault due to double free - zdump: Fix /dev/mem reading - zpcictl: Fix race of SCLP reset and Linux recovery * __v2.20.0 (2022-02-04)__ For Linux kernel version: 5.16 Add new tools / libraries: - Add EditorConfig configuration Changes of existing tools: - s390-tools switches to Fuse 3 as Fuse 2 is deprecated. Affected tools: cmsfs, hmcdrvfs, hsavmcore, zdsfs, zdump - chreipl-fcp-mpath: don't compress the manpage before installing it - cpictl: Report extended version information - genprotimg: Add extended kernel command line support - zdev: modify the lsblk output parser in lszdev - zipl: Add support for longer kernel command lines (now supports up to 64k length) Bug Fixes: - cpictl: Suppress messages for unwritable sysfs files - dbginfo.sh: Fix missing syslog for step create_package - lshwc: Fix CPU list parameter setup for device driver - zdev: Check for errors when removing a devtype setting - zdev: Fix path resolution for multi-mount point file systems - Updated s390-tools-sles15sp3-remove-no-pie-link-arguments.patch to fit the new version, and renamed it to s390-tools-sles15sp5-remove-no-pie-link-arguments.patch. - Added s390-tools-sles15sp5-util_lockfile-fix-includes.patch to fix a compilation problem. One source file was missing an include statement for unistd.h. - Added s390-tools-sles15sp5-ap_tools-ap-check-use-new-mdevctl-install-location.patch An executable binary was being installed under /etc, which is an FHS violation. - Modified spec file to * Change BuildRequires for fuse-devel to fuse3-devel. * Remove obsolete BuildRequires for libpfm-devel * Add a BuildRequires for mdevctl and systemd-devel * Added a %files entry for dir %{_prefix}/lib/dracut/modules.d/99ngdump * Added %config(noreplace) for the new file %{_sysconfdir}/ziplenv * Uncomment the %files entry for %{_mandir}/man7/chreipl-fcp-mpath.7%{?ext_man} Specifying ENABLE_DOC=1 is no longer needed for it to be generated. * Add %dir entries for %{_prefix}/lib/mdevctl, %{_prefix}/lib/mdevctl/scripts.d, and %{_prefix}/lib/mdevctl/scripts.d/callouts NOTE that these directories do not belong to this package, but the mdevctl package has yet to be updated to claim them. So, until that happens, we have to temporarily claim ownership of them for the s390-tools package to build. - Updated the s390-tools-rpmlintrc file to suppress two warnings about the /boot/zipl/active_devices.txt file. - Removed the following obsolete patches: * s390-tools-sles15sp4-chreipl-fcp-mpath-don-t-compress-the-manpage-before-.patch * s390-tools-sles15sp4-chreipl-fcp-mpath-remove-shebang-from-chreipl-fcp-mp.patch * s390-tools-sles15sp4-zdev-modify-the-lsblk-output-parser-in-lszdev.patch * s390-tools-sles15sp4-zdev-Fix-path-resolution-for-multi-mount-point-file-.patch * s390-tools-sles15sp4-01-genprotimg-remove-DigiCert-root-CA-pinning.patch * s390-tools-sles15sp4-02-genprotimg-check_hostkeydoc-relax-default-issuer-che.patch * s390-tools-sles15sp4-libseckey-Fix-re-enciphering-of-EP11-secure-key.patch * s390-tools-sles15sp4-zdump-fix-segfault-due-to-double-free.patch * s390-tools-sles15sp4-libseckey-Adapt-keymgmt_match-implementation-to-Open.patch * s390-tools-sles15sp4-genprotimg-boot-disable-Warray-bounds-for-now.patch * s390-tools-sles15sp4-hyptop-increase-initial-update-interval.patch * s390-tools-sles15sp4-zipl-boot-add-secure-boot-trailer.patch - Added s390-tools-sles15sp5-zipl-boot-disable-Warray-bounds-for-now.patch With this version, the same false positive of "array subscript 0 is outside array bounds" that was previously seen in the genprotimage/boot directory is now happening in zipl/boot. - Added s390-tools-sles15sp5-fix-chown-commands-syntax.patch to eliminate a bunch of warnings. The new version of chown complains if the deprecated 'owner.group' syntax is used instead of the 'owner:group' syntax. - Added s390-tools-sles15sp4-zipl-boot-add-secure-boot-trailer.patch for bsc#1204965. New IBM Z firmware requires all signed boot images to contain a trailing data block with a specific format. - Added s390-tools-sles15sp4-hyptop-increase-initial-update-interval.patch for bsc#1201412. Initial iteration of hyptop can produce bloated values independent from the update delay set by the user. - Added s390-tools-sles15sp4-genprotimg-boot-disable-Warray-bounds-for-now.patch to fix a build failure with gcc12. With gcc12, a "false positive" of "array subscript 0 is outside array bounds" is seen in genprotimg/boot/stage3a.c (bsc#1200131). OBS-URL: https://build.opensuse.org/request/show/1041153 OBS-URL: https://build.opensuse.org/package/show/Base:System/s390-tools?expand=0&rev=139 2022-12-07 16:36:05 +01:00			`ExecStart=/sbin/modprobe vmlogrdr`
			`ExecStop=/sbin/modprobe -r vmlogrdr`
Accepting request 563489 from home:markkp:branches:Base:System - Converted the following SysV init scripts to systemd unit files and scripts (bsc#1050786): * appldata * hsnc * vmlogrdr * xpram OBS-URL: https://build.opensuse.org/request/show/563489 OBS-URL: https://build.opensuse.org/package/show/Base:System/s390-tools?expand=0&rev=43 2018-01-11 01:30:11 +01:00
			`[Install]`
			`WantedBy=default.target`