rpm/s390-tools
SHA256
1
0
Fork 0
forked from pool/s390-tools
Code Pull Requests Activity

Accepting request 947318 from home:markkp:branches:Base:System

Browse Source 
- Upgraded to version 2.19.0 (jsc#SLE-18324)
  * v2.19.0 (2021-11-10)__
    Add new tools / libraries:
    - chreipl-fcp-mpath: New toolset that uses multipath information to change
      the configured FCP re-IPL path on detecting issues with the current path
    Changes of existing tools:
    - dbginfo.sh: Add retry timeout and remove possible blocking "blockdev --report"
    - dbginfo.sh: Collect config- and debug-data for chreipl-fcp-mpath
    - hsci: Add support for multiple MAC addresses
    Bug Fixes:
    - lshwc: Fix compile error for gcc <8.1
    - zdump: Various clean-ups and fixes
    - ziomon: Correct throughput calculation in ziorep_printers
    - zipl: Fix segmentation fault when setting stage3_parms
  * v2.18.0 (2021-10-01)__
    Add new tools:
    - scripts: Add tool for parsing sclp s390dbf logs
    - zdev: Add udev rule helper tool
    - zipl-editenv: Add tool to operate with zIPL environment installed in the boot record
    Changes of existing tools:
    - Makefile: Fix order of build of libraries for parallel builds
    - dbginfo.sh: Add collection in area of timedate, coredump and --check option
    - dbginfo.sh: Add exception on dump2tar for /sys/kernel/mm/page_idle/bitmap
    - dbginfo.sh: Cleanup of outdated sections and general code rework
    - dbginfo.sh: Collect zipl boot menu entries from boot loader specification
    - lszcrypt: Add support for vfio-ap status field
    - lszcrypt: Improved output for deconfig cards and queues
    - lszfcp: Add linkdown case to host marker of extended output
    - zdev: Add auto-config for PCI and crypto devices
    - zdump: Introduce multi-level message logging
    - zipl: Add support for environment block interpretation
    - zkey-cryptsetup: Support LUKS2 volumes with integrity support enabled
    Bug Fixes:
    - hsavmcore: Avoid recompilation of overlay during install step
    - libkmipclient: Fix parsing of hex values for XML and JSON encoding
    - vmur/vmur.cpp: Fix error handling on transfer failure
    - zdump: Lots of smaller fixes across the board
  * v2.17.0 (2021-07-07)__
    Add new tools / libraries:
    - hsavmcore: New utility to make the dump process with kdump more efficient
    - libkmipclient: Add KMIP client shared library
    - libseckey: Add a secure key library
    - lshwc: New tool to extract and list complete counter sets
    Changes of existing tools:
    - genprotimg: Add '--(enable|disable)-pckmo' options
    - genprotimg: Add OpenSSL 3.0 support
    - genprotimg: Change plaintext control flags defaults so PCKMO functions are allowed
    - libutil: Introduce multi-level message logging (util_log)
    - libutil: Introduce util_arch module
    - udev/dasd: Change DASD udev-rule to set none scheduler
    - zdsfs: Add transparent codepage conversion
    - zkey: Add support for KMIP-based key management systems
    Bug Fixes:
    - ttyrun-getty: Avoid conflicts with serial-getty@
    - dbginfo: add /proc/kallsyms - refresh zVM, lscpu - fix WORKARCHIVE handling
    - dbginfo: add KVM data collection for server and guest - fix lszdev
    - genprotimg: Add missing return values in error paths
    - zkey: Fix conversion of CCA DATA keys to CCA CIPHER keys
    - znetconf: avoid conflict with "chzdev -e"
  * v2.16.0 (2021-02-19)__
    Add new tool:
    - hsci: New tool to manage HSCI (HiperSockets Converged Interfaces)
    Changes of existing tools:
    - genprotimg: Add host-key document verification support
    - genprotimg: boot: Make boot loader -march=z900 compatible
    - libekmfweb: Make install directory for shared libraries configurable
    - lsdasd: Add FC Endpoint Security information
    - make: Add address sanitizer support
    - netboot: Add version information to scripts
    - netboot: Bump busybox version in pxelinux.0 build
    - zdev: Add FC Endpoint Security information for DASD devices
    - zdev: Add build option to update initial RAM-disk by default
    - zkey-ekmfweb: Avoid sequence number clash when generating keys
    - zkey/zkey-ekmfweb: Install KMS plugins into configurable location
    - zkey: Add support to store LUKS2 dummy passphrase in key repository
    Bug Fixes:
    - dasdfmt: Fix segfault when an incorrect option is specified
    - genprotimg: Fix several build issues
    - genprotimg: Require argument for 'ramdisk' and 'parmfile' options
    - zcryptstats: Fix handling of partial results with many domains
    - zfcpdbf: Deal with crash 7.2.9 change in caller name formatting
    - zipl/boot: Fix memory use after free in stage2
    - zipl/boot: Fix potential heap overflow in stage2
    - zipl: Fix reading 4k disk's geometry
- Added the following two IBM patches:
  * s390-tools-sles15sp4-chreipl-fcp-mpath-don-t-compress-the-manpage-before-.patch
  * s390-tools-sles15sp4-chreipl-fcp-mpath-remove-shebang-from-chreipl-fcp-mp.patch
- Removed the following obsolete patches
  * s390-tools-sles15sp3-dasdfmt-Fix-segfault-when-an-incorrect-option-is-spe.patch
  * s390-tools-sles15sp3-libutil-Compare-proc-entries-to-vfstype.patch
  * s390-tools-sles15sp3-01-zdev-Add-FC-Endpoint-Security-information-for-DASD-d.patch
  * s390-tools-sles15sp3-02-lsdasd-Add-FC-Endpoint-Security-information.patch
  * s390-tools-sles15sp3-hsci-Add-new-tool-to-control-HiperSockets-Converged-.patch
  * s390-tools-sles15sp3-zcryptstats-Fix-handling-of-partial-results-with-man.patch
  * s390-tools-sles15sp3-01-genprotimg-abort-if-one-of-the-recursive-targets-is-.patch
  * s390-tools-sles15sp3-02-genprotimg-fix-two-memory-leaks.patch
  * s390-tools-sles15sp3-03-genprotimg-require-argument-for-ramdisk-and-parmfile.patch
  * s390-tools-sles15sp3-04-genprotimg-add-host-key-document-verification-suppor.patch
  * s390-tools-sles15sp3-zkey-Fix-APQN-property-names.patch
  * s390-tools-sles15sp3-zipl-fix-4k-scsi-ipl.patch
  * s390-tools-sles15sp3-dasd-change-DASD-udev-rule-to-set-none-scheduler.patch
  * s390-tools-sles15sp3-check-return-code-from-util_file_read_l.patch
  * s390-tools-sles15sp3-dbginfo.sh-exclude-page_idle-bitmap.patch
- Removed an obsolete "export ROOT_BUILD_DIR" statement from the spec file.
- Removed unnecessary defattr statements in the files section.

OBS-URL: https://build.opensuse.org/request/show/947318
OBS-URL: https://build.opensuse.org/package/show/Base:System/s390-tools?expand=0&rev=126
This commit is contained in:
Mark Post 2022-01-19 01:59:23 +00:00 committed by Git OBS Bridge
parent cfd1a1864b
commit 3a47b63b15
4 changed files with 205 additions and 36 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

116
s390-tools-sles15sp4-chreipl-fcp-mpath-don-t-compress-the-manpage-before-.patch Normal file
View File

@ -0,0 +1,116 @@
From 1bbd34e500980b9ea2514776bb2dbd745247e651 Mon Sep 17 00:00:00 2001
From: Benjamin Block <bblock@linux.ibm.com>
Date: Fri, 12 Nov 2021 13:34:22 +0100
Subject: [PATCH] chreipl-fcp-mpath: don't compress the manpage before
installing it
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Remove the call to `gzip` before installing the manpage during the
`make install` call. What and if compression is done should be handled by
the distribution tooling.
This also removes a dependency for the build process.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
---
CHANGELOG.md | 1 +
README.md | 2 +-
chreipl-fcp-mpath/.gitignore | 1 -
chreipl-fcp-mpath/Makefile | 11 +----------
chreipl-fcp-mpath/README.md | 5 ++---
5 files changed, 5 insertions(+), 15 deletions(-)
diff --git a/CHANGELOG.md b/CHANGELOG.md
index 94817e1..8cac1cb 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -12,6 +12,7 @@
- dbginfo.sh: Add retry timeout and remove possible blocking "blockdev --report"
- dbginfo.sh: Collect config- and debug-data for chreipl-fcp-mpath
- hsci: Add support for multiple MAC addresses
+ - chreipl-fcp-mpath: don't compress the manpage before installing it
Bug Fixes:
- lshwc: Fix compile error for gcc <8.1
diff --git a/README.md b/README.md
index eb5c81f..62e4c11 100644
--- a/README.md
+++ b/README.md
@@ -479,4 +479,4 @@ the different tools are provided:
util-linux, udev, and multipath-tools. When using `HAVE_DRACUT=1` with the
make invocation, it also requires dracut. When using `ENABLE_DOC=1` with the
make invocation to build a man page and render the README.md as HTML, make
- further requires pandoc, GNU awk, and GNU Gzip for the build process.
+ further requires pandoc and GNU awk for the build process.
diff --git a/chreipl-fcp-mpath/.gitignore b/chreipl-fcp-mpath/.gitignore
index 4611195..ecd49ee 100644
--- a/chreipl-fcp-mpath/.gitignore
+++ b/chreipl-fcp-mpath/.gitignore
@@ -10,4 +10,3 @@
/README.pdf
/chreipl-fcp-mpath.md
/chreipl-fcp-mpath.7
-/chreipl-fcp-mpath.7.gz
diff --git a/chreipl-fcp-mpath/Makefile b/chreipl-fcp-mpath/Makefile
index 80cab7f..9b4aae0 100644
--- a/chreipl-fcp-mpath/Makefile
+++ b/chreipl-fcp-mpath/Makefile
@@ -12,8 +12,6 @@
# bash:
# - bash
# If $(ENABLE_DOC) is `1`:
-# GNU Gzip:
-# - gzip
# GNU awk:
# - gawk
@@ -186,18 +184,11 @@ INSTDIRS += $(MANDIR)
.PHONY: chreipl-fcp-mpath-install-man-page
chreipl-fcp-mpath-install-man-page: | $(DESTDIR)$(MANDIR)/man7
chreipl-fcp-mpath-install-man-page: chreipl-fcp-mpath.7
- $(GZIP) -fk --best chreipl-fcp-mpath.7
$(INSTALL_DATA) -t $(DESTDIR)$(MANDIR)/man7 \
- chreipl-fcp-mpath.7.gz
+ chreipl-fcp-mpath.7
chreipl-fcp-mpath-install: chreipl-fcp-mpath-install-man-page
-.PHONY: chreipl-fcp-mpath-install-man-page-clean
-chreipl-fcp-mpath-install-man-page-clean:
- rm -f chreipl-fcp-mpath.7.gz
-
-chreipl-fcp-mpath-clean: chreipl-fcp-mpath-install-man-page-clean
-
endif
#
diff --git a/chreipl-fcp-mpath/README.md b/chreipl-fcp-mpath/README.md
index 3943f73..d58ccd2 100644
--- a/chreipl-fcp-mpath/README.md
+++ b/chreipl-fcp-mpath/README.md
@@ -131,8 +131,7 @@ To build and install the documentation (man page) you need:
- pandoc;
- GNU Core Utilities (date);
- - GNU awk;
- - GNU Gzip.
+ - GNU awk.
INSTALLATION
============
@@ -207,7 +206,7 @@ files to these default locations:
/usr/lib/udev/chreipl-fcp-mpath-record-volume-identifier
/usr/lib/udev/chreipl-fcp-mpath-try-change-ipl-path
/usr/lib/udev/rules.d/70-chreipl-fcp-mpath.rules
- /usr/share/man/man7/chreipl-fcp-mpath.7.gz
+ /usr/share/man/man7/chreipl-fcp-mpath.7
UNINSTALL
=========
--
2.26.2

36
s390-tools-sles15sp4-chreipl-fcp-mpath-remove-shebang-from-chreipl-fcp-mp.patch Normal file
View File

@ -0,0 +1,36 @@
From c2f8988444d0ed8274256c1990bb7f8866c265e2 Mon Sep 17 00:00:00 2001
From: Benjamin Block <bblock@linux.ibm.com>
Date: Fri, 12 Nov 2021 12:38:10 +0100
Subject: [PATCH] chreipl-fcp-mpath: remove shebang from
chreipl-fcp-mpath-common.sh.in
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
`chreipl-fcp-mpath-common.sh.in` is never executed, only used as argument
for `source` in the udev helper scripts, so the shebang is unnecessary, and
might be confusing.
Also, tools like `rpmlint` from the rpm software management will complain
about this; e.g.:
s390-tools-chreipl-fcp-mpath.s390x: W: non-executable-script /usr/lib/chreipl-fcp-mpath/chreipl-fcp-mpath-common.sh 644 /bin/bash
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
---
chreipl-fcp-mpath/chreipl-fcp-mpath-common.sh.in | 1 -
1 file changed, 1 deletion(-)
diff --git a/chreipl-fcp-mpath/chreipl-fcp-mpath-common.sh.in b/chreipl-fcp-mpath/chreipl-fcp-mpath-common.sh.in
index 83c4361..0a54322 100644
--- a/chreipl-fcp-mpath/chreipl-fcp-mpath-common.sh.in
+++ b/chreipl-fcp-mpath/chreipl-fcp-mpath-common.sh.in
@@ -1,4 +1,3 @@
-#!/bin/bash
# SPDX-License-Identifier: MIT
#
# chreipl-fcp-mpath: use multipath information to change FCP IPL target
--
2.26.2

85
s390-tools.changes
View File

@ -1,5 +1,5 @@
-------------------------------------------------------------------
Mon Nov 8 20:08:54 UTC 2021 - Mark Post <mpost@suse.com>
Wed Jan 12 21:27:13 UTC 2022 - Mark Post <mpost@suse.com>
- Upgraded to version 2.19.0 (jsc#SLE-18324)
* v2.19.0 (2021-11-10)__
@ -85,6 +85,9 @@ Mon Nov 8 20:08:54 UTC 2021 - Mark Post <mpost@suse.com>
- zipl/boot: Fix memory use after free in stage2
- zipl/boot: Fix potential heap overflow in stage2
- zipl: Fix reading 4k disk's geometry
- Added the following two IBM patches:
* s390-tools-sles15sp4-chreipl-fcp-mpath-don-t-compress-the-manpage-before-.patch
* s390-tools-sles15sp4-chreipl-fcp-mpath-remove-shebang-from-chreipl-fcp-mp.patch
- Removed the following obsolete patches
* s390-tools-sles15sp3-dasdfmt-Fix-segfault-when-an-incorrect-option-is-spe.patch
* s390-tools-sles15sp3-libutil-Compare-proc-entries-to-vfstype.patch
@ -99,10 +102,20 @@ Mon Nov 8 20:08:54 UTC 2021 - Mark Post <mpost@suse.com>
* s390-tools-sles15sp3-zkey-Fix-APQN-property-names.patch
* s390-tools-sles15sp3-zipl-fix-4k-scsi-ipl.patch
* s390-tools-sles15sp3-dasd-change-DASD-udev-rule-to-set-none-scheduler.patch
* s390-tools-sles15sp3-check-return-code-from-util_file_read_l.patch
* s390-tools-sles15sp3-check-return-code-from-util_file_read_l.patch
* s390-tools-sles15sp3-dbginfo.sh-exclude-page_idle-bitmap.patch
- Removed an obsolete "export ROOT_BUILD_DIR" statement from the spec file.
- Removed unnecessary defattr statements in the files section.
-------------------------------------------------------------------
Fri Nov 12 18:05:00 UTC 2021 - Mark Post <mpost@suse.com>
- Added s390-tools-sles15sp3-dbginfo.sh-exclude-page_idle-bitmap.patch
Reading /sys/kernel/mm/page_idle/bitmap can cause hang up on
reading offline pages. (bsc#1192599)
- Added %{version} to the Requires: libekmfweb1 for the
libekmfweb1-devel package.
-------------------------------------------------------------------
Mon Oct 18 17:51:04 UTC 2021 - Mark Post <mpost@suse.com>
@ -127,7 +140,7 @@ Fri Jun 18 20:55:06 UTC 2021 - Mark Post <mpost@suse.com>
-------------------------------------------------------------------
Wed May 26 21:13:23 UTC 2021 - Mark Post <mpost@suse.com>
- Modified the following patches to correct the output from the
- Modified the following patches to correct the output from the
dasdfmt command when *not* using "YaST mode." (bsc#1182816, bsc#1182820)
* s390-tools-sles15sp3-Format-devices-in-parallel.patch
* s390-tools-sles15sp3-Implement-Y-yast_mode.patch
@ -386,7 +399,7 @@ Thu Sep 17 20:16:08 UTC 2020 - Mark Post <mpost@suse.com>
-------------------------------------------------------------------
Tue Sep 15 18:46:04 CEST 2020 - ro@suse.de
- use libexecdir for net-snmp agent config
- use libexecdir for net-snmp agent config
-------------------------------------------------------------------
Fri Jul 24 21:17:36 UTC 2020 - Mark Post <mpost@suse.com>
@ -601,7 +614,7 @@ Fri Oct 11 15:30:19 UTC 2019 - Mark Post <mpost@suse.com>
this version
* dasdfmt-retry-BIODASDINFO-if-device-is-busy.patch
* s390-tools-sles12-fdasd-skip-partition-check-and-BLKRRPART-ioctl.patch
* s390-tools-sles15-Allow-multiple-device-arguments.patch
* s390-tools-sles15-Allow-multiple-device-arguments.patch
* s390-tools-sles15-Format-devices-in-parallel.patch
* s390-tools-sles15-Implement-f-for-backwards-compability.patch
* s390-tools-sles15-Implement-Y-yast_mode.patch
@ -707,7 +720,7 @@ Mon Jul 22 18:27:28 UTC 2019 - Mark Post <mpost@suse.com>
-------------------------------------------------------------------
Thu Feb 21 19:38:18 UTC 2019 - mpost@suse.com
- Now that IBM has the package on github, use a full source URL.
- Change Pre-Req to Requires(pre) and (post), and remove dracut.
- Changed the group for the hmcdrvfs package from Base:System to
@ -762,7 +775,7 @@ Wed Jan 9 23:17:22 UTC 2019 - mpost@suse.com
* Add a group named zkeyadm
* Create directory /etc/zkey/repository
* Set the permissions on /etc/zkey and /etc/zkey/repository
* Added /usr/lib/modules-load.d/pkey.conf
* Added /usr/lib/modules-load.d/pkey.conf
- Made numerous changes to the spec file based on the output from
spec-cleaner.
@ -829,7 +842,7 @@ Tue Nov 13 19:22:01 UTC 2018 - mpost@suse.com
* s390-tools-sles15sp1-0009-zkey-let-packaging-create-the-zkeyadm-group-and-perm.patch
* s390-tools-sles15sp1-0010-zkey-Update-README-to-add-info-about-packaging-requi.patch
- Added the following patches for Fate#326390 (bsc#1113353)
dm-crypt with protected keys - change master key tool
dm-crypt with protected keys - change master key tool
* s390-tools-sles15sp1-0011-zkey-Typo-in-message.patch
* s390-tools-sles15sp1-0012-zkey-Fix-memory-leak.patch
* s390-tools-sles15sp1-0013-zkey-Fix-APQN-validation-routine.patch
@ -980,7 +993,7 @@ Thu Nov 30 20:22:09 UTC 2017 - mpost@suse.com
-------------------------------------------------------------------
Thu Nov 23 13:41:27 UTC 2017 - rbrown@suse.com
- Replace references to /var/adm/fillup-templates with new
- Replace references to /var/adm/fillup-templates with new
%_fillupdir macro (boo#1069468)
-------------------------------------------------------------------
@ -1249,7 +1262,7 @@ Wed Jul 12 18:14:13 UTC 2017 - mpost@suse.com
Mon Jul 3 17:29:19 CEST 2017 - ro@suse.de
- Remove lsmem and chmem and their manpages from the package,
both tools have been added to util-linux-2.30
both tools have been added to util-linux-2.30
-------------------------------------------------------------------
Wed May 31 21:26:50 UTC 2017 - mpost@suse.com
@ -1319,7 +1332,7 @@ Wed Feb 1 22:00:35 UTC 2017 - mpost@suse.com
-------------------------------------------------------------------
Wed Dec 14 16:09:52 UTC 2016 - Thomas.Blume@suse.com
- cio_ignore.service: change After dependency to local-fs.target to
- cio_ignore.service: change After dependency to local-fs.target to
Before and remove Wants dependency (bsc#965263)
-------------------------------------------------------------------
@ -1491,7 +1504,7 @@ Wed Sep 9 17:55:19 UTC 2015 - mpost@suse.com
- Updated s390-tools-sles12-pardasdfmt.patch to fix error messages
that didn't have a "\n" on the end. (bsc#940818)
- Updated the spec file to install 40-z90crypt.rules into
- Updated the spec file to install 40-z90crypt.rules into
/usr/lib/udev/rules.d/ (bsc#943777)
- Added the following patches from IBM (bsc#944390)
- s390-tools-sles12sp1-lszfcp-incorrect-device-types.patch
@ -1607,7 +1620,7 @@ Wed Sep 3 17:08:55 UTC 2014 - mpost@suse.com
-------------------------------------------------------------------
Wed Sep 3 01:43:27 CEST 2014 - ro@suse.de
- sanitize release line in specfile
- sanitize release line in specfile
-------------------------------------------------------------------
Tue Sep 2 17:13:38 UTC 2014 - mpost@suse.com
@ -1657,7 +1670,7 @@ Fri Jul 11 11:25:53 UTC 2014 - mpost@suse.com
- Implement cio_ignore.service (bnc#882685, bnc#886833)
Added cio_ignore.service and setup_cio_ignore.sh
Fixup dependencies for cio_ignore service
Fixup dependencies for cio_ignore service
Fixup setup_cio_ignore.sh to correctly enable devices
- Added s390-tools-sles12-remove-FBA-detection-for-virtblk-devices.patch
(bnc#883989)
@ -1696,8 +1709,8 @@ Fri Jun 13 23:34:58 UTC 2014 - mpost@suse.com
- ctc_configure
- dasd_configure
- qeth_configure
- zfcp_host_configure
- Added an empty /boot/zipl/active_devices.txt file for the
- zfcp_host_configure
- Added an empty /boot/zipl/active_devices.txt file for the
tracking function (bnc#874902).
-------------------------------------------------------------------
@ -1975,7 +1988,7 @@ Fri Feb 7 00:21:49 UTC 2014 - mpost@suse.com
as shipped from IBM are not being built against the current version of
the s390-tools source.
- Added s390-tools-sles12-chzdev-lszdev-new-tools.4.patch from IBM.
- Updated s390-tools-sles12-install-lszdev-manpage.patch to also
- Updated s390-tools-sles12-install-lszdev-manpage.patch to also
install chzdev.8 and renamed it to s390-tools-sles12-install-manpages.patch
Also explicitly set the file permissions to 644.
- Added %dir entries in the spec file for /var/adm/backup/chzdev
@ -1994,7 +2007,7 @@ Wed Feb 5 00:29:24 UTC 2014 - mpost@suse.com
look like it does today.
- Added "ZFCPDUMP_DIR=/usr/lib/s390-tools/zfcpdump" to the make
command so that zfcpdump would look in the right directory.
- Removed an unnecessary
- Removed an unnecessary
"mkdir -p $RPM_BUILD_ROOT%{_datadir}/s390-tools/zfcpdump" from
the spec file
- Removed some of the new code from IBM for the Persistent Device
@ -2035,7 +2048,7 @@ Wed Dec 18 16:52:10 UTC 2013 - mpost@suse.com
Thu Dec 12 17:00:54 UTC 2013 - mpost@suse.com
- Added /usr/lib/systemd/system/iucvtty@.service for systemd support
- Renamed sles12.chzdev.lszdev.addition.patch to
- Renamed sles12.chzdev.lszdev.addition.patch to
s390-tools-sles12-chzdev-lszdev-new-tools.patch
-------------------------------------------------------------------
@ -2157,7 +2170,7 @@ Wed Apr 17 18:31:25 UTC 2013 - mpost@suse.com
Tue Apr 2 19:50:38 UTC 2013 - mpost@suse.com
- Updated mkinitrd-setup-dasd.sh script to include udev rules for DASD
in DIAG mode. (bnc#808256)
in DIAG mode. (bnc#808256)
-------------------------------------------------------------------
Tue Mar 26 16:59:03 UTC 2013 - mpost@suse.com
@ -2179,14 +2192,14 @@ Mon Mar 18 21:30:34 UTC 2013 - mpost@suse.com
h ZFCP to zFCP (3/18/2013)
- Updated ctc_configure, dasd_configure, iucv_configure, qeth_configure, zfcp_disk_configure
, zfcp_host_configure to replace $SYSFS with /sysfs in the one instance where $SYSFS would b
e null.-
e null.-
-------------------------------------------------------------------
Fri Mar 15 10:57:54 UTC 2013 - rmilasan@suse.com
- Add/change links in /dev/disk/by-id on 'change' and 'add' udev
trigger (bnc#808042).
add: s390-tools-sles11sp2-update-by_id-links-on-change-and-add-action.patch
add: s390-tools-sles11sp2-update-by_id-links-on-change-and-add-action.patch
-------------------------------------------------------------------
Mon Feb 18 18:22:34 UTC 2013 - mpost@suse.com
@ -2313,7 +2326,7 @@ Fri Jan 13 12:19:12 UTC 2012 - stefan.fent@suse.com
- s390-tools-1.15.0 Maintenace Patches #7 (bnc #740749)
- ttyrun: Introduce verbose option for syslog messages
- HiperSockets Network Concentrator: correct warning
- HiperSockets Network Concentrator: adapt to kernel level
- HiperSockets Network Concentrator: adapt to kernel level
-------------------------------------------------------------------
Thu Jan 12 21:59:49 UTC 2012 - jjolly@suse.com
@ -2382,7 +2395,7 @@ Mon Oct 24 10:58:51 UTC 2011 - uli@suse.com
-------------------------------------------------------------------
Thu Oct 13 12:36:16 UTC 2011 - thardeck@suse.com
- moved iucvconn_on_login from doc to /usr/bin
- moved iucvconn_on_login from doc to /usr/bin
- added rcdumpconf link
-------------------------------------------------------------------
@ -2496,7 +2509,7 @@ Tue Jun 14 15:32:29 CEST 2011 - uli@suse.de
- s390-tools-12-sles11sp2-ttyrun.patch: ttyrun: run a program if a
terminal device is available (fate#312296)
- s390-tools-12-sles11sp2-hyptop.patch: hyptop: Show hypervisor
performance data on System z (fate#311766)
performance data on System z (fate#311766)
- s390-tools-12-sles11sp2-chreipl-enhancements.patch: chreipl: Re-IPL tool
"chreipl" enhancements (fate#311861)
- s390-tools-12-sles11sp2-tunedasd-query-reservation-status.patch:
@ -2594,7 +2607,7 @@ Tue Aug 10 15:18:56 CEST 2010 - jjolly@suse.de
-------------------------------------------------------------------
Wed Jun 2 11:23:55 CEST 2010 - sf@suse.de
- dasd_reload: iterate over all dasd udev-rules (bnc #606394)
- dasd_reload: iterate over all dasd udev-rules (bnc #606394)
-------------------------------------------------------------------
Fri May 7 07:26:41 CEST 2010 - jjolly@suse.de
@ -3217,7 +3230,7 @@ Thu Mar 8 14:55:03 CET 2007 - hare@suse.de
-------------------------------------------------------------------
Mon Mar 5 16:24:27 CET 2007 - hare@suse.de
- update -> 1.6.0
- update -> 1.6.0
* Implement dasdinfo and supply own udev rules (#222326)
- Fix major/minor number problem (#245342)
- install mon_fsstatd sysconfig and init scripts
@ -3239,8 +3252,8 @@ Fri Feb 2 14:07:46 CET 2007 - hare@suse.de
-------------------------------------------------------------------
Wed Jan 31 10:29:03 CET 2007 - hare@suse.de
- update -> 1.6.0-v4:
* tape390_crpyt: Enhanced error handling
- update -> 1.6.0-v4:
* tape390_crpyt: Enhanced error handling
* New man page for /dev/prandom
-------------------------------------------------------------------
@ -3346,7 +3359,7 @@ Wed Feb 22 09:58:53 CET 2006 - hare@suse.de
- Update to s390-tools-1.5.2
- Update to lib-zfcp-hbaapi-1.4
- dasd_configure should wait for udev before calling vmcp
- dasd_configure should wait for udev before calling vmcp
(#149490 - LTC21537)
- Fix mkdump to not use blkid
- Minor fixes to mkdump
@ -3451,7 +3464,7 @@ Wed Jun 15 16:59:48 CEST 2005 - uli@suse.de
Wed Jun 15 16:17:25 CEST 2005 - yxu@suse.de
- fix build with GCC4
- add prebuild images and ramdisk for zfcp
- add prebuild images and ramdisk for zfcp
-------------------------------------------------------------------
Wed Jun 15 10:56:43 CEST 2005 - hare@suse.de
@ -3520,7 +3533,7 @@ Wed Jun 9 16:46:32 CEST 2004 - hare@suse.de
-------------------------------------------------------------------
Mon Jun 7 16:25:56 CEST 2004 - uli@suse.de
- added missing %fillup_prereq (bug #41732)
- added missing %fillup_prereq (bug #41732)
-------------------------------------------------------------------
Fri Jun 4 11:29:16 CEST 2004 - hare@suse.de
@ -3560,13 +3573,13 @@ Tue May 25 16:39:35 CEST 2004 - hare@suse.de
-------------------------------------------------------------------
Tue May 18 17:16:14 CEST 2004 - uli@suse.de
- fixed incorrect use of fillup_and_insserv (bug #40733)
- fixed incorrect use of fillup_and_insserv (bug #40733)
-------------------------------------------------------------------
Mon Apr 26 13:37:03 CEST 2004 - uli@suse.de
- added dasdro script
- fixed warning in e2fsprogs code
- fixed warning in e2fsprogs code
-------------------------------------------------------------------
Mon Apr 26 09:37:35 CEST 2004 - hare@suse.de
@ -3577,7 +3590,7 @@ Mon Apr 26 09:37:35 CEST 2004 - hare@suse.de
-------------------------------------------------------------------
Fri Apr 23 16:38:17 CEST 2004 - hare@suse.de
- Update to final version s390-tools-1.3.0
- Update to final version s390-tools-1.3.0
- Fixed zfcp_host_configure to use sh instead of bash
- Fixed zfcp_disk_configure to not try to delete hwcfg-file
if the directory does not exist.
@ -3753,7 +3766,7 @@ Mon Jan 28 19:00:09 CET 2002 - bk@suse.de
-------------------------------------------------------------------
Fri Dec 14 18:57:31 CET 2001 - bk@suse.de
- Update to the Dec12 2001 drop s390-tools (-2, -3 and -4) patches
- Update to the Dec12 2001 drop s390-tools (-2, -3 and -4) patches
- zipl.conf: fix target setting of dumptape, add missing dumpdasd
-------------------------------------------------------------------

4
s390-tools.spec
View File

@ -87,6 +87,10 @@ Source98: zfcp_disk_configure.8
Source99: zfcp_host_configure.8
###
# IBM patches
Patch001: s390-tools-sles15sp4-chreipl-fcp-mpath-don-t-compress-the-manpage-before-.patch
Patch002: s390-tools-sles15sp4-chreipl-fcp-mpath-remove-shebang-from-chreipl-fcp-mp.patch
# SUSE patches
Patch900: s390-tools-sles12-zipl_boot_msg.patch
Patch901: s390-tools-sles15-sysconfig-compatible-dumpconf.patch