rpm/shairport-sync
SHA256
1
0
Fork 0
forked from pool/shairport-sync
Code Pull Requests Activity
factory
shairport-sync/shairport-sync.changes
Hillwood Yang 35a1060f6a - Added missing runtime dependency: avahi 
- Removed: drop-user-config.patch
  This is now configurable in the build system.
- Update version to 4.3.4
  * https://github.com/mikebrady/shairport-sync/releases/tag/4.3.4
  * ALSA: better support for HDMI ports
  * Enabled termination of a disconnected session in AirPlay 2 operation after
    a timeout -- it had been disabled by default.
  * Fixed a bug that prevented Shairport Sync from terminating cleanly when a
    fatal error occurred while directly accessing the alsa output device.
  * Fixed a bug that prevented Shairport Sync from recovering cleanly if a
    player disconnected without warning.
  * Avoided using TCP_KEEPINTVL and TCP_KEEPCNT if they are not defined.
  * Fixed a race condition with the metadata queues.
- Update version to 4.3.3
  * https://github.com/mikebrady/shairport-sync/releases/tag/4.3.3
  * The man entry for Shairport Sync has moved from Section 7 (Miscellaneous
    information) to where it should be: Section 1 (General commands (tools and
    utilities)).
  * Bug fix: Use pthread_rwlock_wrlock instead of pthread_rdlock_wrlock when
    tearing down a connection.
  * Add support for the mbedtls3 library.
  * If a network interface is specified in the configuration file, limit
    addresses used for PTP to that network interface only.
  * Make Shairport Sync terminate if the configuration file exists but can not
    be opened. 
  * Look for DACP-ID and Active-Remote in the GET /info request, where it
    sometimes appears in an AirPlay 2 session originating from an Intel Mac.
  * Do not print the password in debug logs.
- Add missing runtime dependency: avahi (boo#1213521)

OBS-URL: https://build.opensuse.org/package/show/multimedia:apps/shairport-sync?expand=0&rev=41
2024-09-04 14:58:16 +00:00

398 lines
20 KiB
Plaintext
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

-------------------------------------------------------------------
Tue Sep 3 08:42:40 UTC 2024 - Wolfgang Frisch <wolfgang.frisch@suse.com>
- Add missing runtime dependency: avahi (boo#1213521)
- Remove drop-user-config.patch
This is now configurable in the build system.
- Update version to 4.3.4
* https://github.com/mikebrady/shairport-sync/releases/tag/4.3.4
* ALSA: better support for HDMI ports
* Enabled termination of a disconnected session in AirPlay 2 operation after
a timeout -- it had been disabled by default.
* Fixed a bug that prevented Shairport Sync from terminating cleanly when a
fatal error occurred while directly accessing the alsa output device.
* Fixed a bug that prevented Shairport Sync from recovering cleanly if a
player disconnected without warning.
* Avoided using TCP_KEEPINTVL and TCP_KEEPCNT if they are not defined.
* Fixed a race condition with the metadata queues.
- Update version to 4.3.3
* https://github.com/mikebrady/shairport-sync/releases/tag/4.3.3
* The man entry for Shairport Sync has moved from Section 7 (Miscellaneous
information) to where it should be: Section 1 (General commands (tools and
utilities)).
* Bug fix: Use pthread_rwlock_wrlock instead of pthread_rdlock_wrlock when
tearing down a connection.
* Add support for the mbedtls3 library.
* If a network interface is specified in the configuration file, limit
addresses used for PTP to that network interface only.
* Make Shairport Sync terminate if the configuration file exists but can not
be opened.
* Look for DACP-ID and Active-Remote in the GET /info request, where it
sometimes appears in an AirPlay 2 session originating from an Intel Mac.
* Do not print the password in debug logs.
-------------------------------------------------------------------
Thu Mar 21 14:08:25 UTC 2024 - Hillwood Yang <hillwood@opensuse.org>
- Update version to 4.3.2
* Changelog: https://github.com/mikebrady/shairport-sync/releases/tag/4.3.2
This update contains a brand new PipeWire backend with full synchronisation
-- your feedback is welcome on this. The update also contains a number
of bug fixes.
-------------------------------------------------------------------
Mon Feb 26 13:14:51 UTC 2024 - Dominique Leuenberger <dimstar@opensuse.org>
- Use %autosetup macro. Allows to eliminate the usage of deprecated
PatchN.
-------------------------------------------------------------------
Sun Jun 25 15:57:57 UTC 2023 - Niklas Haas <obs@haasn.xyz>
- Fix systemd unit file patch to properly apply hardening even
when building with avahi enabled (as present in the spec), and also
fix hardening patch to not restrict realtime priority.
-------------------------------------------------------------------
Sun Jun 25 15:37:02 UTC 2023 - Niklas Haas <obs@haasn.xyz>
- Update to use Airplay 2 protocol.
-------------------------------------------------------------------
Sun Jun 25 11:44:48 UTC 2023 - Niklas Haas <obs@haasn.xyz>
- Add pipewire audio output support.
-------------------------------------------------------------------
Sun Jun 25 11:38:12 UTC 2023 - Niklas Haas <obs@haasn.xyz>
- Add missing `audio` group during setup.
-------------------------------------------------------------------
Sun May 21 20:32:51 UTC 2023 - Lukas Müller <expeehaa@outlook.com>
- Update to version 4.2.
Changelog: https://github.com/mikebrady/shairport-sync/releases/tag/4.2
* This release consists of enhancements and important bug fixes to
Shairport Sync Version 4.1. For information on the new features of 4.1,
including AirPlay 2 support, please see the Version 4.1 Release Note.
-------------------------------------------------------------------
Sat May 6 20:32:49 UTC 2023 - Lukas Müller <expeehaa@outlook.com>
- Enable build with alsa support.
-------------------------------------------------------------------
Mon Jan 2 21:20:05 UTC 2023 - Dirk Müller <dmueller@suse.com>
- update to 4.1.1:
* This release consists of enhancements and bug fixes to Version 4.1. For
information on the new features of 4.1, including AirPlay 2 support,
please refer to the 4.1 Release Note.
Enhancements
* Use the TCP keepalive facility to close a play session if the client
connection drops for a minute.
Metadata Enhancements
* Add FramePosition (phbt), FirstFramePosition (phb0), OutputRate (ofps),
OutputFormat (ofmt), StreamType (styp), ServiceName (svna), ClientName
(snam) properties to the D-Bus interface and to the metadata stream
(codes in brackets).
* FramePosition/FirstFramePosition metadata is generated only if the
progress_interval in the metadata section of the configuration file is
non-zero. The progress interval can also be set by a new
SetFramePositionUpdateInterval method in the D-Bus interface.
* FramePosition/FirstFramePosition metadata is of the form <RTP Frame
number>/<Local Time> where the local time, in nanoseconds (a 64-bit
number), is the precise time that frame should be played. The metadata
is generated when the frame is placed in the output buffer, and is thus
generated audio_backend_buffer_desired_length_in_seconds (usually 0.2
seconds) before the time in question.
* Add xesam:albumArtist and xesam:composer metadata (if available) to the
metadata bundle presented in the D-Bus interface.
* Add a new metadata item: sps:songdatakind, derived from the asdk
metadata token, to the metadata bundle presented in the D-Bus interface.
If 0 it seems to indicate an item of a specific duration such as an
audio track; if 1 it seems to mean the stream is of unknown duration,
for example an internet radio stream.
Bug Fixes
* Fix a bug that prevented multiple classic AirPlay instances being
recognised. The bug was that the 12-digit classic AirPlay service name
prefixes for each instance were all identically derived from a MAC
hardware address. The fix was to modify the generation of prefixes to
depend on the service name as well as the hardware address.
* Fix a bug that prevented play to the the PulseAudio backend from
resuming after a pause. The bug was due to changes in the way pauses
were handled and the fix was to reopen the stream if it is closed
whenever a play or latency request was made.
* Fix a long-standing bug which didn't close the socket used for the RTSP
connection, potentially exhausting the sockets available.
* Fix a bug in audio_alsa.c when there is no hardware device name.
* Add a configuration check for the xxd program when building for AirPlay
2.
* Fix a compilation bug on certain platforms by trying to use AC_CHECK_LIB
to find libavcodec if the PKG_CHECK_MODULES check fails.
-------------------------------------------------------------------
Tue Dec 27 13:17:00 UTC 2022 - Hillwood Yang <hillwood@opensuse.org>
- Update version to 4.1
* AirPlay 2 support
* Improved libao backend for better compatibility with HomeBrew installations
* Improved MQTT and D-Bus facilities
* Metadata improvements
* Automatically-generated Docker images
-------------------------------------------------------------------
Mon Feb 7 13:50:40 UTC 2022 - Hillwood Yang <hillwood@opensuse.org>
- Update version to 3.3.9
* Fix a build failure with convolution raised since automake 1.16.5
and https://git.savannah.gnu.org/cgit/automake.git/commit/?id=f4a3a70f69e1dbccb6578f39ef47835098a04624
* Fix tinysvcmdns: rr_data_len goes beyond packet buffer
-------------------------------------------------------------------
Wed Nov 17 08:08:53 UTC 2021 - Johannes Segitz <jsegitz@suse.com>
- Added hardening to systemd service(s) (bsc#1181400). Added patch(es):
* harden_shairport-sync.service.patch
-------------------------------------------------------------------
Wed Aug 18 01:55:20 UTC 2021 - Hillwood Yang <hillwood@opensuse.org>
- Update version to 3.3.8
* For the PulseAudio backend pa, added a new server entry to the pa section of
the configuration file, allowing you to specify a connection to a remote or
a local system PulseAudio instance instead of letting PulseAudio choose.
* Enhance features. See details in RELEASENOTES.md
* Fix bugs
-------------------------------------------------------------------
Wed Aug 19 09:10:26 UTC 2020 - Callum Farmer <callumjfarmer13@gmail.com>
- Fixes for %_libexecdir changing to /usr/libexec (bsc#1174075)
-------------------------------------------------------------------
Mon Mar 23 13:21:55 UTC 2020 - Hillwood Yang <hillwood@opensuse.org>
- Update version to 3.3.6
* Resampling has been added for the Jack Audio backend. This can be
used to up-sample to 192kHz.
* Fix bugs. Please refer to
https://github.com/mikebrady/shairport-sync/blob/master/RELEASENOTES.md#version-336
-------------------------------------------------------------------
Sun Jan 19 03:06:01 UTC 2020 - Hillwood Yang <hillwood@opensuse.org>
- Update version to 3.3.5
* Fix a crashing bug if output format S24 was chosen.
* Fix a bug whereby if Loudness was enabled through the D-Bus interface, the
output would be muted until the volume was changed.
* Enhancements to the D-Bus Interface
* Fixes a deferred crash that occurred in Ubuntu 14.04
* Fixes a potential crash when an incomplete fmtp parameter set is sent by the
requesting client. Thanks to Angus71 for the fault report and for the
repair.
* Fixed a potential crash
* A fix ensures the hardware mixer of an alsa device is detected and
initialised before responding to the first volume setting.
* Fixes were made to the MPRIS and native D-Bus interfaces.
* Fixes an error whereby the 'pvol'volume metadata was no longer sent if
Shairport Sync was configured to ignore volume control information coming
from the audio source.
* Instead of returning EXIT_FAILURE, return EXIT_WITH_SUCCESS on early exit
with either "version" (–version or -V) or "help" (–help or -h) arguments.
Thanks to Henrik Nilsson for the patch.
* Normalises the 'pvol' volume outputs so that when both the software and
hardware attenuators are in use to extend the overall attenuation range, the
maximum output level corresponds to the maximum output level of the hardware
mixer.
* Add the option of including the file and line number of each log entry's
source.
* Rewrite the logic for identifying missing packets of audio and for asking
for resends.
* Expose the advanced settings controlling the resend request logic.
* Exposes two advanced metadata settings related to handling cover art
-------------------------------------------------------------------
Tue Oct 22 07:50:44 UTC 2019 - Tuukka Pasanen <tuukka.pasanen@ilmi.fi>
- Update version to 3.3.2
- Bug Fixes
* Fix a bug that sometimes caused a crash when a service name was
specified in the configuration file. The fix was to be more
systematic in allocating and deallocating memory for temporary strings.
Thanks to Chris Boot, Ari Sovijarvi, Bernhard Übelacker and
Jeroen Massar for the bug report. Fixes Debian Bug report #925577
and supercedes Pull Request #879.
* Correct some documentation typos – thanks again to Chris Boot.
- Enhancements
* Add some settings for controlling the disable_standby_mode.
* The first setting is the disable_standby_mode_silence_threshold,
which is the amount of audio in the output device's hardware buffer.
It should normally be close to the value given in the
audio_backend_buffer_desired_length_in_seconds setting.
If it drops to this value, silence is added to the buffer to prevent
the output device from becoming idle.
* The second new setting is the disable_standby_mode_silence_scan_interval
which is the time between checks of the output device's hardware buffer.
-------------------------------------------------------------------
Mon Jun 24 14:19:17 UTC 2019 - Hillwood Yang <hillwood@opensuse.org>
- Update version to 3.3.1
* Fix a bug in the MQTT documentation and add sanity checking for the port
chosen -- thanks to David Crook.
* Fix a bug that caused manual format and rate settings to be ignored --
thanks to Jörg Krause.
* Add missing support for format settings S24_LE, S24_BE, S32_LE and S32_BE.
* Fix a bug that caused dither to be too loud.
* Fix error message for invalid
* Automatic Format and Speed Selection for alsa devices. Using the alsa back
end, when you specify the output device, Shairport Sync will now, by
default, select the best output format and speed. For instance, if your
output device is capable of 32-bit operation, it will be selected. In some
situations, this will give a noticeable improvement in sound quality – see
the discussion of audio improvements below. The greatest bit depth will
always be selected, and the lowest speed that is a multiple of 44,100.
* Audio Transient Reduction: A Disable Standby feature to eliminate certain
faint-but-annoying audible pops and clicks has been added for alsa devices.
The setting prevents an output device entering standby mode and thus
minimises standby/busy transitions, which can sometimes be heard. It is
pretty impressive, especially combined with fixes to the dithering code
described below. If you can enable 24- or 32-bit audio output to your output
device, you can get even better results. This feature is available in the
ALSA back end (standard in Linux) when it is driving output devices that can
provide precision delay information, i.e. most hardware output devices and
possibly some virtual devices.
* New active/inactive program hooks. Basically, these are "deglitched"
replacements for play start/play end program hooks. When a play session
starts, the system goes active. When the play session ends, the system
remains active for a period determined by the active_state_timeout setting,
10 seconds by default. If another play session starts before the period
elapses, the system stays active; otherwise the system goes inactive. The
hooks are performed when the system goes active or inactive.
* A new MQTT client interface, with support for metadata and for some remote
control commands.
* A new Jack Audio back end.
* PulseAudio: A new option for the pa backend to allow the specification of
the audio sink.
* CYGWIN: An updated and enhanced installation procedure to install Shairport
Sync as a Cygwin service.
* Opt-in default for certain added features: If support for soxr, metadata or
the Apple ALAC decoder is included during building (i.e. at the ./configure
stage), then the features are enabled by default at run time. The features
are (1) soxr interpolation – chosen automatically if the device is fast
enough, (2) the Apple ALAC decoder and (3) metadata, which is implied when
you include support for metadata, D-Bus, MPRIS or MQTT features.
* Shairport Sync can now receive AirPlay streams consisting of raw PCM – 16
bit stereo frames at 44,100 samples per second. Packets must be 352 frames
exactly.
* Improved support for big-endian CPUs by adding support for explicit -endian
formats, i.e. S16_LE, S16_BE, S24_LE, S24_BE, S32_LE, S32_BE.
* Add a list of alsa hardware devices found to the alsa backend help section
in the shairport-sync -h text. (Linux only – doesn't work on
FreeBSD/OpenBSD.)
* Replace the existing watchdog, which only offered partial coverage, with a
much more robust thread-based watchdog.
* Allow a reported remote processing time of zero.
* Fix a logical error that could cause an endless loop during a flush.
* Ensure a player thread is correctly initialised before allowing it to be
cancelled cleanly.
* Ensure the player thread always has a cancellation point so that it should
always be possible to ask it to terminate.
* If a play session is interrupted, wait for it to terminate for up to three
seconds.
* If a play session is interrupted, ensure the new session uses a different
set of UDP ports. This is to ensure that data from the interrupted session –
which might be still in transit – doesn't enter the new session.
* Make all ALSA command sequences un-cancellable. This is to ensure that ALSA
subsystem will not be left in a partially-initialised state if Shairport
Sync terminates abruptly.
* When a connection is terminated abruptly, ensure that all the UDP ports is
use are closed properly.
* Impose timeouts on both reading and writing to the supervisory RTSP
connection governing a session.
* When closing the RTSP connection due to an error, close it immediately,
without waiting for a full TCP handshake, because, if the other end has
erred, the handshake may never come.
* Fix a parameter initialisation error in a situation where there is no
hardware mixer.
* Fix an MQTT-related crash by ignoring unrecognised commands.
* Fix a compilation error and a warning when using the --with-convolution
configuration option.
* A compilation problem in OpenBSD has been fixed by changing the order of
some include files.
* Fix a problem when calling the program to be run when the volume control is
changed. Thanks to shaven for the report.
* Remove unrecognised options from FreeBSD and OpenBSD compilation
instructions.
* Ensure the compiler flag HAVE_LIBSOXR is defined if the --with-soxr
configuration flag is used and pkg-config is in use.
* Fix a bug in the dbus native interface which would silently switch soxr
interpolation to basic.
* Fix a mutex lock bug in the metadata hub. No known effects.
* Fix an arithmetic overflow in frame rate calculations that could occur after
2^32 frames – approximately 27 hours at 44,100 frames per second.
* A number of memory leaks have been identified and removed.
* An incorrect warning about using the deprecated general statistics options
has been fixed.
-------------------------------------------------------------------
Mon Mar 18 21:21:48 UTC 2019 - Jan Engelhardt <jengelh@inai.de>
- Transform bash-specific sh code to POSIX sh in scriptlets.
- Do not hide errors from useradd.
- Reduce hard scriptlet dependency on systemd;
%service_* does not need it.
-------------------------------------------------------------------
Sun Feb 10 10:27:18 UTC 2019 - Tomáš Chvátal <tchvatal@suse.com>
- Really use upstream tarball from the source url
-------------------------------------------------------------------
Wed Feb 6 13:16:47 UTC 2019 - Tuukka Pasanen <tuukka.pasanen@ilmi.fi>
- Update to release 3.2.2
Version 3.2 introduces two big new features – MPRIS support and a "native" Shairport
Sync D-Bus interface. MPRIS offers a standard set of facilities for implementing remote
control and the native D-Bus interface allows local programs to interact
directly with Shairport Sync.
When used with either of these interfaces, Shairport Sync offers access
to the remote control commands available to control the source, and also
offers access to metadata, including titles and cover art. These new features
are experimental, but are already useful.
This release of Shairport Sync contains important bug fixes and stability
improvements and is recommended for all users. If offers better synchronisation,
better compatibility with third-party AirPlay sources, greater stability when
used with YouTube and macOS system sound, faster resynchronisation, better
performance on noisy or congested networks and many other improvements.
A quick INSTALL guide for the Raspberry Pi, a how-to CAR INSTALL guide and
a note about installing to OpenBSD have been added.
- See https://github.com/mikebrady/shairport-sync/releases for details
-------------------------------------------------------------------
Mon Jul 30 18:15:58 UTC 2018 - jengelh@inai.de
- Avoid repeating name in summary (rpmlint).
-------------------------------------------------------------------
Mon Jun 11 13:48:36 UTC 2018 - hillwood@opensuse.org
- Initial package for 3.2rc10.
- Add drop-user-config.patch, move configuring user account to rpm spec.
- Add firewalld profile.
- Add README.SUSE
View Git Blame Copy Permalink