rpm/spacenavd
SHA256
1
0
Fork 0
forked from pool/spacenavd
Code Pull Requests Activity
factory
spacenavd/spacenavd.changes
Herbert Graeber ddfe768b54 - Version 1.3 
* Support for dominant axis mode. Dominant axis toggle can be bound as
    a button action.
  * Fixed device detection for some serial Spaceballs which were misdetected
    due to spurious data arriving before the "@reset".
  * Normalized default axis mapping/sign for CadMan USB and Spaceball 5000 USB.
  * Linux: stop using the evdev time field, which was dropped in 32bit linux
    for year 2038 compatibility.
  * Protocol: added missing set/get requests for the repeat interval.
  * Updated device blacklists to ignore 3Dconnexion keyboards/mice.
  * Build improvements and fixes for various platforms.
- Add libXext as a build requires

OBS-URL: https://build.opensuse.org/package/show/hardware/spacenavd?expand=0&rev=31
2024-08-24 11:17:44 +00:00

291 lines
13 KiB
Plaintext
Raw Permalink Blame History

-------------------------------------------------------------------
Thu Aug 22 19:29:13 UTC 2024 - Herbert Graeber <herbert@graeber-clan.de>
- Version 1.3
* Support for dominant axis mode. Dominant axis toggle can be bound as
a button action.
* Fixed device detection for some serial Spaceballs which were misdetected
due to spurious data arriving before the "@reset".
* Normalized default axis mapping/sign for CadMan USB and Spaceball 5000 USB.
* Linux: stop using the evdev time field, which was dropped in 32bit linux
for year 2038 compatibility.
* Protocol: added missing set/get requests for the repeat interval.
* Updated device blacklists to ignore 3Dconnexion keyboards/mice.
* Build improvements and fixes for various platforms.
- Add libXext as a build requires
-------------------------------------------------------------------
Thu Feb 22 21:49:37 UTC 2024 - Herbert Graeber <herbert@graeber-clan.de>
- Replace %patchN with %autosetup
-------------------------------------------------------------------
Fri Dec 23 20:47:37 UTC 2022 - Herbert Graeber <herbert@graeber-clan.de>
- Update to version 1.2
* Fixed incorrect button mappings for the SpaceMouse Pro. The button remapping
which was designed to fix this in v1.1 would end up becoming disabled due to
an incorrect assumption about reported number of buttons.
* Fixed incorrect number of stop bits for serial magellan spacemice. Some devices
tolerated that, while others did not work.
* Improved compatibility with some serial spaceballs. Relaxed the device matching
condition and allowed some time for the device to boot up before initializing it.
* Added hardcoded "reasonable" default values for number of axes and buttons in
the incomplete FreeBSD USB device handling code, to stop it from reporting 0 axes
and freaking clients out. This is a stop-gap, eventually it needs to be
implemented correctly.
-------------------------------------------------------------------
Sun Sep 25 16:47:35 UTC 2022 - Herbert Graeber <herbert@graeber-clan.de>
- Add example files to package
-------------------------------------------------------------------
Sun Sep 25 16:30:12 UTC 2022 - Herbert Graeber <herbert@graeber-clan.de>
- Update to version 1.1
* fixed incorrect number of buttons reported on SpaceMouse Pro and SpaceMouse
Enterprise.
* fixed non-contiguous button numbers on SpaceMouse Pro and SpaceMouse Enterprise,
which could crash spnavcfg.
* linux evdev: detect button base offset, instead of hardcoding 256 (BN_MISC),
which fixes incorrect button numbers on the Magellan SpaceMouse USB.
* fixed crash when attempting to save configuration (save command received from
the client socket), and a configuration file does not already exist.
* linux hotplug: use delayed activation to avoid multiple hotplug triggers and
the resulting log spam.
* reduced logging on the "verbose" setting. Now accepting multiple -v arguments
for maximum verbosity.
* fixed compatibility with newer 3dconnexion SDK clients.
* fixed libm link omission, which broke the build on systems where isfinite is not
a macro to a compiler built-in (BSD libc).
* Added example configuration files with reasonable button mappings for the
SpacePilot and the SpaceMouse Enterprise under doc/.
-------------------------------------------------------------------
Tue Apr 26 10:34:54 UTC 2022 - Herbert Graeber <herbert@graeber-clan.de> 1.0
- Fix spacenavd path in service file
-------------------------------------------------------------------
Mon Apr 25 14:43:00 UTC 2022 - Herbert Graeber <herbert@graeber-clan.de> 1.0
- Readd spacenavd-fix-pidfile.patch
-------------------------------------------------------------------
Mon Apr 25 13:33:52 UTC 2022 - Herbert Graeber <herbert@graeber-clan.de> 1.0
- Update to version 1.0
* Implemented hugely improved spacenav protocol v1. It includes future
expandability provisions, and adds support for a wealth of new capabilities
for clients, including:
+ device information queries (number of buttons and axes, device identification...).
+ configuration management (allows configuration tools like spnavcfg to be
regular clients without special priviledges).
+ new events, with event selection mechanism (device change, config change,
raw axis, raw button).
* Improved configuration file handling. Spacenavd now saves changes to the file,
and does so while retaining user changes, including comments and empty lines,
and modifying existing lines when possible.
* Added device level axis remapping (non-configurable), to normalize axis
assignments across all known devices, to avoid having to change the configuration
every time a different device is connected.
* Added initial USB device support on FreeBSD.
* Added the ability to bind buttons to actions like sensitivity changes or axis muting.
* Added XTEST support for keyboard event injection, which works much more reliably.
Falls back to XSendEvent if XTEST is unavailable.
* Fixed serial magellan spacemouse compatibility over USB-serial converters with the PL2303 UART.
* Added --cfgdir= build option, to change the configuration file directory.
* Fixed MacOS X build.
* Fixed LED staying on on startup if it was configured otherwise.
* Fixed inconsistent handling of the logging method selection arguments.
* Fixed spacenavd terminating with SIGPIPE when clients disconnected ungracefully.
* Build fixes and improvements.
- Remove spacenavd-fix-pidfile.patch
-------------------------------------------------------------------
Wed Nov 17 10:49:36 UTC 2021 - Johannes Segitz <jsegitz@suse.com>
- Added hardening to systemd service(s) (bsc#1181400). Added patch(es):
* harden_spacenavd.service.patch
Modified:
* spacenavd.service
-------------------------------------------------------------------
Tue Mar 16 18:56:16 UTC 2021 - Herbert Graeber <herbert@graeber-clan.de>
- Update to version 0.8
* Rewrote the serial spaceball code from scratch, to support both spaceball
and magellan spacemice.
* Fixed non-X11 build which was broken in the previous version.
* Print usage information when encountering an invalid argument, instead of
just printing "invalid argument".
* Minor build improvements.
- Log stderr to default logger
- Update list of supported devices in spec file
-------------------------------------------------------------------
Tue Mar 31 15:36:18 UTC 2020 - Herbert Graeber <herbert@graeber-clan.de>
- Remove unnecessary _service file
-------------------------------------------------------------------
Sun Mar 22 17:19:36 UTC 2020 - Herbert Graeber <herbert@graeber-clan.de>
- Fix pidfile (/var/run -> /run)
-------------------------------------------------------------------
Sun Mar 22 12:30:44 UTC 2020 - Herbert Graeber <herbert@graeber-clan.de>
- Bugfix release 0.7.1
* fixed build on gcc 10
* fixed configure script which failed to detect the version number correctly
in release 0.7, incorrectly trying to rely on git to do so.
- remove support for pre-systemd openSUSE releases
- remove patch spacenavd-add-blacklist-and-device-ids.patch
- remove patch spacenavd-add-missing-usbid.patch
- remove patch spacenavd-0.6+git3066072.patch
- remove patch spacenavd-fix-pidfile.patch
- Release 0.7
* implemented the ability to log to syslog.
* ignore joystick devices when searching for USB devices (linux).
* added code to attempt to wrestle devices from the X server.
* added the new 3Dconnexion vendor id to the device matching logic.
* made builds reproducible by linking in alphabetical order.
* added option led = auto, to turn the LED on only when a client connects (linux).
* implemented a blacklist of USB device ids that should be ignored.
-------------------------------------------------------------------
Sat Mar 16 11:30:05 UTC 2019 - Herbert Graeber <herbert@graeber-clan.de>
- Add two upstream patches for proper handling of device ids:
* spacenavd-add-blacklist-and-device-ids.patch
* spacenavd-add-missing-usbid.patch
-------------------------------------------------------------------
Sat Aug 25 21:52:43 UTC 2018 - herbert@graeber-clan.de
- Add patch spacenavd-0.6+git3066072.patch with some bug fixes und support
for newer devices:
* minor formatting fixes old and new, and usage of the LED_AUTO enumeration
in src/client.c
* LED state enumeration instead of magic numbers, since it's no longer
a simple boolean value.
* improve device information provided by daemon
* updated readme file
* replaced the svn $rev$ substitution with git describe falling back to
git rev-parse HEAD
* fixed axis detection, and added detection of the number of buttons for USB
devices on linux
* Applied Wiedemann's patch (sf#6) to link object files in alphabetical order
* Added missing include to dev_usb_darwin.c closing bug #10
* fixed a small bug in device detection which sometimes skipped a single
character during parsing
* added rule to match devices with the new 3Dconnexion vendor id (0x256f)
* Better example-spnavrc descriptions - remove some debugging printfs which
where commited accidentally previously
* moved axis remapping before checking deadzones
* trying to remove devices from Xinput
* added all the missing options to the example-spnavrc file
* possible fix for bug #9
* added code to skip joystick device files while parsing /proc/bus/input/devices
- Drop reproducible.patch
-------------------------------------------------------------------
Sat Aug 25 20:38:40 UTC 2018 - herbert@graeber-clan.de
- Add modalias supplements for all supported devices
-------------------------------------------------------------------
Sat Aug 25 19:30:10 UTC 2018 - herbert@graeber-clan.de
- The repository moved to github
- Rerelease of version 0.6
* added example config file
* fixed setup_init failing to detect the correct runlevel in some cases.
* fixed calculation of time periods in motion events.
* code refactoring to support multiple operating systems.
* added freebsd and macos x support for serial devices.
* fixed build when system headers don't define EV_SYN (linux).
* added dependency tracking in the makefile.
* added separate sensitivity control for each axis.
* added separate deadzone control for each axis.
* added option to avoid grabbing the device.
* fixed spurious error messages on SIGHUP.
* added auto-repeat non-zero events option (useful for serial devices).
* added button number remapping configuration option.
* added keyboard emulation option.
* abort if spacenavd is already running.
* heed DESTDIR env var in makefile install and uninstall targets.
* merged serial magellan protocol code.
* added systemd init file under contrib/.
* merged Ralf Morel's patch for multiple device support.
* improved XAUTHORITY handling.
* improved device selection with predicate callback and USB ids.
* added joystick support.
* fixed axis remapping for some HID devices.
* fixed race condition in X detection.
* applied Christian Ehrlicher's patches fixing a number of memory bugs.
-------------------------------------------------------------------
Wed Feb 14 19:06:12 UTC 2018 - crrodriguez@opensuse.org
- Remove buildRequires on xorg-x11-devel
-------------------------------------------------------------------
Sat May 27 05:26:02 UTC 2017 - bwiedemann@suse.com
- Add reproducible.patch to sort input files to make build reproducible
(boo#1041090)
-------------------------------------------------------------------
Sun Oct 30 17:43:38 UTC 2016 - jengelh@inai.de
- Rectify description, use source URL and avoid sysvinit calls
under systemd.
-------------------------------------------------------------------
Thu Oct 27 17:52:13 UTC 2016 - herbert@graeber-clan.de
- Add a manpage taken from debian
-------------------------------------------------------------------
Thu Oct 27 11:50:40 UTC 2016 - dan.weatherill@cantab.net
- add xdpyinfo package as explicit dependency, it is required for
the spnavd_ctl script to work properly
-------------------------------------------------------------------
Mon Mar 2 20:45:40 UTC 2015 - herbert@graeber-clan.de
- Update to version 0.6
- Remove init file
-------------------------------------------------------------------
Sun Sep 8 13:59:19 UTC 2013 - herbert@graeber-clan.de
- Change license into SPDX format
- Add systemd support
- Spec file cleanup
-------------------------------------------------------------------
Mon Jan 24 19:49:46 UTC 2011 - herbert@graeber-clan.de
- Update to version 0.5
- Use separate changes file
-------------------------------------------------------------------
Sun Mar 22 00:00:00 UTC 2009 - herbert@graeber-clan.de
- Added rcspacenavd link
- Fixed xinitrc script
-------------------------------------------------------------------
Sat Mar 21 00:00:00 UTC 2009 - herbert@graeber-clan.de
- Initial package
- Add new init-script
- Add commented configuration file
- Add xinitrc script
View Git Blame Copy Permalink