2007-12-13 04:49:24 +01:00
|
|
|
#
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
# spec file for package strongswan (Version 4.4.0)
|
2007-12-13 04:49:24 +01:00
|
|
|
#
|
2010-03-05 11:51:28 +01:00
|
|
|
# Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany.
|
2007-12-13 04:49:24 +01:00
|
|
|
#
|
2008-08-28 12:57:23 +02:00
|
|
|
# All modifications and additions to the file contributed by third parties
|
|
|
|
|
# remain the property of their copyright owners, unless otherwise agreed
|
|
|
|
|
# upon. The license for this file, and modifications and additions to the
|
|
|
|
|
# file, is the same license as for the pristine package itself (unless the
|
|
|
|
|
# license for the pristine package is not an Open Source License, in which
|
|
|
|
|
# case the license is the MIT License). An "Open Source License" is a
|
|
|
|
|
# license that conforms to the Open Source Definition (Version 1.9)
|
|
|
|
|
# published by the Open Source Initiative.
|
|
|
|
|
|
2007-12-13 04:49:24 +01:00
|
|
|
# Please submit bugfixes or comments via http://bugs.opensuse.org/
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
# norootforbuild
|
|
|
|
|
|
2008-02-19 14:17:02 +01:00
|
|
|
|
2007-12-13 04:49:24 +01:00
|
|
|
Name: strongswan
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
%define upstream_version 4.4.0
|
2007-12-13 04:49:24 +01:00
|
|
|
%define strongswan_docdir %{_docdir}/%{name}
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
Version: 4.4.0
|
|
|
|
|
Release: 0
|
2010-03-05 11:51:28 +01:00
|
|
|
License: GPLv2+
|
2007-12-13 04:49:24 +01:00
|
|
|
Group: Productivity/Networking/Security
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
Summary: OpenSource IPsec-based VPN Solution
|
2007-12-13 04:49:24 +01:00
|
|
|
Url: http://www.strongswan.org/
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
Requires: strongswan-ikev1 = %{version}
|
|
|
|
|
Requires: strongswan-ikev2 = %{version}
|
|
|
|
|
Requires: strongswan-ipsec = %{version}
|
2007-12-13 04:49:24 +01:00
|
|
|
AutoReqProv: on
|
|
|
|
|
Source0: http://download.strongswan.org/strongswan-%{upstream_version}.tar.bz2
|
|
|
|
|
Source1: http://download.strongswan.org/strongswan-%{upstream_version}.tar.bz2.sig
|
|
|
|
|
Source2: %{name}.init.in
|
2008-04-25 16:46:58 +02:00
|
|
|
Source3: %{name}-%{version}-rpmlintrc
|
2009-07-14 23:56:37 +02:00
|
|
|
Patch1: %{name}_modprobe_syslog.patch
|
2007-12-13 04:49:24 +01:00
|
|
|
BuildRoot: %{_tmppath}/%{name}-%{version}-build
|
|
|
|
|
BuildRequires: bison flex gmp-devel gperf pkg-config
|
2009-07-14 23:56:37 +02:00
|
|
|
BuildRequires: libcap-devel
|
|
|
|
|
BuildRequires: libopenssl-devel
|
|
|
|
|
BuildRequires: libgcrypt-devel
|
2007-12-13 04:49:24 +01:00
|
|
|
BuildRequires: openldap2-devel
|
2009-07-14 23:56:37 +02:00
|
|
|
BuildRequires: curl-devel
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
BuildRequires: libuuid-devel
|
|
|
|
|
BuildRequires: NetworkManager-devel
|
2007-12-13 04:49:24 +01:00
|
|
|
|
|
|
|
|
%description
|
|
|
|
|
StrongSwan is an OpenSource IPsec-based VPN Solution for Linux
|
|
|
|
|
|
2010-03-05 11:51:28 +01:00
|
|
|
* runs both on Linux 2.4 (KLIPS IPsec) and Linux 2.6 (NETKEY IPsec) kernels
|
|
|
|
|
* implements both the IKEv1 and IKEv2 (RFC 4306) key exchange protocols
|
|
|
|
|
* Fully tested support of IPv6 IPsec tunnel and transport connections
|
|
|
|
|
* Dynamical IP address and interface update with IKEv2 MOBIKE (RFC 4555)
|
|
|
|
|
* Automatic insertion and deletion of IPsec-policy-based firewall rules
|
|
|
|
|
* Strong 128/192/256 bit AES or Camellia encryption, 3DES support
|
2007-12-13 04:49:24 +01:00
|
|
|
* NAT-Traversal via UDP encapsulation and port floating (RFC 3947)
|
|
|
|
|
* Dead Peer Detection (DPD, RFC 3706) takes care of dangling tunnels
|
2010-03-05 11:51:28 +01:00
|
|
|
* Static virtual IPs and IKEv1 ModeConfig pull and push modes
|
|
|
|
|
* XAUTH server and client functionality on top of IKEv1 Main Mode authentication
|
|
|
|
|
* Virtual IP address pool managed by IKE daemon or SQL database
|
|
|
|
|
* Secure IKEv2 EAP user authentication (EAP-SIM, EAP-AKA, EAP-MSCHAPv2, etc.)
|
|
|
|
|
* Optional relaying of EAP messages to AAA server via EAP-RADIUS plugin
|
|
|
|
|
* Support of IKEv2 Multiple Authentication Exchanges (RFC 4739)
|
2007-12-13 04:49:24 +01:00
|
|
|
* Authentication based on X.509 certificates or preshared keys
|
2010-03-05 11:51:28 +01:00
|
|
|
* Generation of a default self-signed certificate during first strongSwan startup
|
|
|
|
|
* Retrieval and local caching of Certificate Revocation Lists via HTTP or LDAP
|
|
|
|
|
* Full support of the Online Certificate Status Protocol (OCSP, RCF 2560).
|
2007-12-13 04:49:24 +01:00
|
|
|
* CA management (OCSP and CRL URIs, default LDAP server)
|
|
|
|
|
* Powerful IPsec policies based on wildcards or intermediate CAs
|
2010-03-05 11:51:28 +01:00
|
|
|
* Group policies based on X.509 attribute certificates (RFC 3281)
|
|
|
|
|
* Storage of RSA private keys and certificates on a smartcard (PKCS #11 interface)
|
|
|
|
|
* Modular plugins for crypto algorithms and relational database interfaces
|
|
|
|
|
* Support of elliptic curve DH groups and ECDSA certificates (Suite B, RFC 4869)
|
|
|
|
|
* Optional built-in integrity and crypto tests for plugins and libraries
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
* Smooth Linux desktop integration via the strongSwan NetworkManager applet
|
2007-12-13 04:49:24 +01:00
|
|
|
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
This package triggers the installation of both, IKEv1 and IKEv2 daemons.
|
2007-12-13 04:49:24 +01:00
|
|
|
|
|
|
|
|
Authors:
|
|
|
|
|
--------
|
|
|
|
|
Andreas Steffen
|
|
|
|
|
and others
|
|
|
|
|
|
|
|
|
|
%package doc
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
License: GPL v2 or later
|
|
|
|
|
Summary: OpenSource IPsec-based VPN Solution
|
2007-12-13 04:49:24 +01:00
|
|
|
Group: Productivity/Networking/Security
|
|
|
|
|
|
|
|
|
|
%description doc
|
|
|
|
|
StrongSwan is an OpenSource IPsec-based VPN Solution for Linux
|
|
|
|
|
|
|
|
|
|
This package provides the StrongSwan documentation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Authors:
|
|
|
|
|
--------
|
|
|
|
|
Andreas Steffen
|
|
|
|
|
and others
|
|
|
|
|
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
%package libs0
|
|
|
|
|
License: GPL v2 or later
|
|
|
|
|
Summary: OpenSource IPsec-based VPN Solution
|
|
|
|
|
Group: Productivity/Networking/Security
|
|
|
|
|
Conflicts: strongswan < %{version}
|
|
|
|
|
|
|
|
|
|
%description libs0
|
|
|
|
|
StrongSwan is an OpenSource IPsec-based VPN Solution for Linux
|
|
|
|
|
|
|
|
|
|
This package provides the strongswan library and plugins.
|
|
|
|
|
|
|
|
|
|
%package ikev1
|
|
|
|
|
License: GPL v2 or later
|
|
|
|
|
Summary: OpenSource IPsec-based VPN Solution
|
|
|
|
|
Group: Productivity/Networking/Security
|
|
|
|
|
Requires: iproute2
|
|
|
|
|
Requires: strongswan-libs0 = %{version}
|
|
|
|
|
Requires: strongswan-ipsec = %{version}
|
|
|
|
|
Provides: strongswan-daemon = %{version} ikev1
|
|
|
|
|
Provides: pluto
|
|
|
|
|
Conflicts: freeswan openswan strongswan < %{version}
|
|
|
|
|
|
|
|
|
|
%description ikev1
|
|
|
|
|
StrongSwan is an OpenSource IPsec-based VPN Solution for Linux
|
|
|
|
|
|
|
|
|
|
This package provides the pluto IKEv1 daemon.
|
|
|
|
|
|
|
|
|
|
%package ikev2
|
|
|
|
|
License: GPL v2 or later
|
|
|
|
|
Summary: OpenSource IPsec-based VPN Solution
|
|
|
|
|
Group: Productivity/Networking/Security
|
|
|
|
|
Requires: iproute2
|
|
|
|
|
Requires: strongswan-libs0 = %{version}
|
|
|
|
|
Requires: strongswan-daemon-starter = %{version}
|
|
|
|
|
Provides: strongswan-daemon = %{version} ikev2
|
|
|
|
|
Conflicts: openswan strongswan < %{version}
|
|
|
|
|
|
|
|
|
|
%description ikev2
|
|
|
|
|
StrongSwan is an OpenSource IPsec-based VPN Solution for Linux
|
|
|
|
|
|
|
|
|
|
This package provides the charon IKEv2 daemon.
|
|
|
|
|
|
|
|
|
|
%package ipsec
|
|
|
|
|
License: GPL v2 or later
|
|
|
|
|
Summary: OpenSource IPsec-based VPN Solution
|
|
|
|
|
Group: Productivity/Networking/Security
|
|
|
|
|
PreReq: grep %insserv_prereq %fillup_prereq
|
|
|
|
|
Requires: strongswan-libs0 = %{version}
|
|
|
|
|
Requires: strongswan-daemon = %{version}
|
|
|
|
|
#Recommends: strongswan-ikev1 = %{version}
|
|
|
|
|
#Recommends: strongswan-ikev2 = %{version}
|
|
|
|
|
Provides: strongswan-daemon-starter = %{version}
|
|
|
|
|
Provides: strongswan = %{version} ipsec VPN
|
|
|
|
|
Obsoletes: strongswan < %{version}
|
|
|
|
|
Conflicts: freeswan openswan
|
|
|
|
|
|
|
|
|
|
%description ipsec
|
|
|
|
|
StrongSwan is an OpenSource IPsec-based VPN Solution for Linux
|
|
|
|
|
|
|
|
|
|
This package provides the /etc/init.d/ipsec service script and allows
|
|
|
|
|
to maintain both, IKEv1 and IKEv2 daemons, using /etc/ipsec.conf and
|
|
|
|
|
/etc/ipsec.sectes files.
|
|
|
|
|
|
|
|
|
|
%package nm
|
|
|
|
|
License: GPL v2 or later
|
|
|
|
|
Summary: OpenSource IPsec-based VPN Solution
|
|
|
|
|
Group: Productivity/Networking/Security
|
|
|
|
|
Requires: strongswan-libs0 = %{version}
|
|
|
|
|
Requires: strongswan-ikev2 = %{version}
|
|
|
|
|
Provides: strongswan-daemon-starter = %{version}
|
|
|
|
|
|
|
|
|
|
%description nm
|
|
|
|
|
StrongSwan is an OpenSource IPsec-based VPN Solution for Linux
|
|
|
|
|
|
|
|
|
|
This package provides the NetworkManager plugin to control the
|
|
|
|
|
charon IKEv2 daemon through D-Bus, designed to work using the
|
|
|
|
|
NetworkManager-strongswan graphical user interface.
|
|
|
|
|
|
2007-12-13 04:49:24 +01:00
|
|
|
%prep
|
|
|
|
|
%setup -q -n %{name}-%{upstream_version}
|
|
|
|
|
%patch1 -p0
|
|
|
|
|
sed -e 's|@libexecdir@|%_libexecdir|g' \
|
|
|
|
|
< $RPM_SOURCE_DIR/strongswan.init.in \
|
|
|
|
|
> strongswan.init
|
|
|
|
|
|
|
|
|
|
%build
|
2009-07-30 23:00:09 +02:00
|
|
|
CFLAGS="$RPM_OPT_FLAGS -W -Wall -Wno-pointer-sign -Wno-strict-aliasing"
|
|
|
|
|
export RPM_OPT_FLAGS CFLAGS
|
2010-03-05 11:51:28 +01:00
|
|
|
#libtoolize --force
|
2007-12-13 04:49:24 +01:00
|
|
|
%{?suse_update_config:%{suse_update_config -f}}
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
#autoreconf
|
2007-12-13 04:49:24 +01:00
|
|
|
%configure \
|
2009-07-30 23:00:09 +02:00
|
|
|
--enable-integrity-test \
|
2009-07-14 23:56:37 +02:00
|
|
|
--with-capabilities=libcap \
|
|
|
|
|
--with-resolv-conf=%{_localstatedir}/run/strongswan/resolv.conf \
|
|
|
|
|
--enable-smartcard \
|
|
|
|
|
--with-default-pkcs11=%{_libdir}/opensc-pkcs11.so \
|
|
|
|
|
--enable-cisco-quirks \
|
|
|
|
|
--enable-openssl \
|
2010-03-05 11:51:28 +01:00
|
|
|
%if 0%{suse_version} >= 1110
|
2009-07-14 23:56:37 +02:00
|
|
|
--enable-gcrypt \
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
%endif
|
|
|
|
|
%if 0%{suse_version} >= 1130
|
|
|
|
|
--enable-ha \
|
|
|
|
|
--enable-dhcp \
|
|
|
|
|
--enable-farp \
|
|
|
|
|
--enable-attr-sql \
|
|
|
|
|
--enable-socket-dynamic \
|
2010-03-05 11:51:28 +01:00
|
|
|
%endif
|
2009-07-14 23:56:37 +02:00
|
|
|
--enable-ldap \
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
--enable-curl \
|
|
|
|
|
--enable-nm
|
2008-08-29 01:51:42 +02:00
|
|
|
make %{?_smp_mflags:%_smp_mflags}
|
2007-12-13 04:49:24 +01:00
|
|
|
|
|
|
|
|
%install
|
|
|
|
|
export RPM_BUILD_ROOT
|
|
|
|
|
install -m755 -d ${RPM_BUILD_ROOT}%{_sbindir}/
|
2008-08-29 01:51:42 +02:00
|
|
|
install -m755 -d ${RPM_BUILD_ROOT}%{_sysconfdir}/ipsec.d/
|
2007-12-13 04:49:24 +01:00
|
|
|
install -m755 -d ${RPM_BUILD_ROOT}%{_sysconfdir}/init.d/
|
|
|
|
|
install -m755 strongswan.init ${RPM_BUILD_ROOT}%{_sysconfdir}/init.d/ipsec
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
ln -s %{_sysconfdir}/init.d/ipsec ${RPM_BUILD_ROOT}%{_sbindir}/rcipsec
|
2007-12-13 04:49:24 +01:00
|
|
|
#
|
|
|
|
|
make install DESTDIR="$RPM_BUILD_ROOT"
|
|
|
|
|
#
|
|
|
|
|
rm -f ${RPM_BUILD_ROOT}%{_sysconfdir}/ipsec.secrets
|
|
|
|
|
cat << EOT > ${RPM_BUILD_ROOT}%{_sysconfdir}/ipsec.secrets
|
|
|
|
|
#
|
|
|
|
|
# ipsec.secrets
|
|
|
|
|
#
|
|
|
|
|
# This file holds the RSA private keys or the PSK preshared secrets for
|
|
|
|
|
# the IKE/IPsec authentication. See the ipsec.secrets(5) manual page.
|
|
|
|
|
#
|
|
|
|
|
EOT
|
|
|
|
|
#
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/lib*.{so,a,la}
|
2009-07-30 23:00:09 +02:00
|
|
|
find $RPM_BUILD_ROOT%{_libexecdir}/ipsec \
|
2007-12-13 04:49:24 +01:00
|
|
|
-name "*.a" -o -name "*.la" | xargs -r rm -f
|
|
|
|
|
#
|
|
|
|
|
install -m755 -d ${RPM_BUILD_ROOT}%{strongswan_docdir}/
|
|
|
|
|
install -m644 TODO NEWS README COPYING CREDITS \
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
${RPM_SOURCE_DIR}/README.SUSE \
|
2007-12-13 04:49:24 +01:00
|
|
|
${RPM_BUILD_ROOT}%{strongswan_docdir}/
|
2009-07-14 23:56:37 +02:00
|
|
|
install -m755 -d $RPM_BUILD_ROOT%{_localstatedir}/run/strongswan
|
2007-12-13 04:49:24 +01:00
|
|
|
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
%post libs0
|
|
|
|
|
%{run_ldconfig}
|
|
|
|
|
test -d %{_localstatedir}/run/strongswan || \
|
|
|
|
|
%{__mkdir_p} %{_localstatedir}/run/strongswan
|
|
|
|
|
|
|
|
|
|
%postun libs0
|
2007-12-13 04:49:24 +01:00
|
|
|
%{run_ldconfig}
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
|
|
|
|
|
%post ipsec
|
2007-12-13 04:49:24 +01:00
|
|
|
%{fillup_and_insserv ipsec}
|
|
|
|
|
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
%preun ipsec
|
2007-12-13 04:49:24 +01:00
|
|
|
%{stop_on_removal ipsec}
|
|
|
|
|
if test -s %{_sysconfdir}/ipsec.secrets.rpmsave; then
|
|
|
|
|
cp -p --backup=numbered %{_sysconfdir}/ipsec.secrets.rpmsave %{_sysconfdir}/ipsec.secrets.rpmsave.old
|
|
|
|
|
fi
|
|
|
|
|
if test -s %{_sysconfdir}/ipsec.conf.rpmsave; then
|
|
|
|
|
cp -p --backup=numbered %{_sysconfdir}/ipsec.conf.rpmsave %{_sysconfdir}/ipsec.conf.rpmsave.old
|
|
|
|
|
fi
|
|
|
|
|
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
%postun ipsec
|
2007-12-13 04:49:24 +01:00
|
|
|
%{insserv_cleanup}
|
|
|
|
|
|
|
|
|
|
%files
|
|
|
|
|
%defattr(-,root,root)
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
%dir %{strongswan_docdir}
|
|
|
|
|
%{strongswan_docdir}/README.SUSE
|
|
|
|
|
|
|
|
|
|
%files ipsec
|
|
|
|
|
%defattr(-,root,root)
|
2007-12-13 04:49:24 +01:00
|
|
|
%config(noreplace) %attr(600,root,root) %{_sysconfdir}/ipsec.conf
|
|
|
|
|
%config(noreplace) %attr(600,root,root) %{_sysconfdir}/ipsec.secrets
|
|
|
|
|
%dir %{_sysconfdir}/ipsec.d
|
|
|
|
|
%dir %{_sysconfdir}/ipsec.d/crls
|
|
|
|
|
%dir %{_sysconfdir}/ipsec.d/reqs
|
|
|
|
|
%dir %{_sysconfdir}/ipsec.d/certs
|
|
|
|
|
%dir %{_sysconfdir}/ipsec.d/acerts
|
|
|
|
|
%dir %{_sysconfdir}/ipsec.d/aacerts
|
|
|
|
|
%dir %{_sysconfdir}/ipsec.d/cacerts
|
|
|
|
|
%dir %{_sysconfdir}/ipsec.d/ocspcerts
|
|
|
|
|
%dir %attr(700,root,root) %{_sysconfdir}/ipsec.d/private
|
|
|
|
|
%config %{_sysconfdir}/init.d/ipsec
|
|
|
|
|
%{_sbindir}/rcipsec
|
|
|
|
|
%{_sbindir}/ipsec
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
%{_mandir}/man8/ipsec.8*
|
2007-12-13 04:49:24 +01:00
|
|
|
%{_mandir}/man5/ipsec.conf.5*
|
|
|
|
|
%{_mandir}/man5/ipsec.secrets.5*
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
%dir %{_libexecdir}/ipsec
|
|
|
|
|
%{_libexecdir}/ipsec/_updown
|
|
|
|
|
%{_libexecdir}/ipsec/_updown_espmark
|
|
|
|
|
%{_libexecdir}/ipsec/_copyright
|
|
|
|
|
%{_libexecdir}/ipsec/pki
|
|
|
|
|
%{_libexecdir}/ipsec/openac
|
|
|
|
|
%{_libexecdir}/ipsec/scepclient
|
|
|
|
|
%{_libexecdir}/ipsec/starter
|
|
|
|
|
%{_libexecdir}/ipsec/stroke
|
|
|
|
|
%dir %{_libexecdir}/ipsec/plugins
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-stroke.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-updown.so
|
|
|
|
|
|
|
|
|
|
%files ikev1
|
|
|
|
|
%defattr(-,root,root)
|
|
|
|
|
%dir %{_libexecdir}/ipsec
|
|
|
|
|
%{_libexecdir}/ipsec/whack
|
|
|
|
|
%{_libexecdir}/ipsec/pluto
|
|
|
|
|
%{_libexecdir}/ipsec/_pluto_adns
|
|
|
|
|
|
|
|
|
|
%files ikev2
|
|
|
|
|
%defattr(-,root,root)
|
|
|
|
|
%dir %{_libexecdir}/ipsec
|
|
|
|
|
%{_libexecdir}/ipsec/charon
|
|
|
|
|
#%dir %{_libexecdir}/ipsec/plugins
|
|
|
|
|
|
|
|
|
|
%files nm
|
|
|
|
|
%defattr(-,root,root)
|
|
|
|
|
%dir %{_libexecdir}/ipsec
|
|
|
|
|
%dir %{_libexecdir}/ipsec/plugins
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-nm.so
|
2007-12-13 04:49:24 +01:00
|
|
|
|
|
|
|
|
%files doc
|
|
|
|
|
%defattr(-,root,root)
|
|
|
|
|
%dir %{strongswan_docdir}
|
|
|
|
|
%{strongswan_docdir}/TODO
|
|
|
|
|
%{strongswan_docdir}/NEWS
|
|
|
|
|
%{strongswan_docdir}/README
|
|
|
|
|
%{strongswan_docdir}/COPYING
|
|
|
|
|
%{strongswan_docdir}/CREDITS
|
|
|
|
|
%{_mandir}/man3/anyaddr.3*
|
|
|
|
|
%{_mandir}/man3/atoaddr.3*
|
|
|
|
|
%{_mandir}/man3/atoasr.3*
|
|
|
|
|
%{_mandir}/man3/atosa.3*
|
|
|
|
|
%{_mandir}/man3/atoul.3*
|
|
|
|
|
%{_mandir}/man3/goodmask.3*
|
|
|
|
|
%{_mandir}/man3/initaddr.3*
|
|
|
|
|
%{_mandir}/man3/initsubnet.3*
|
|
|
|
|
%{_mandir}/man3/keyblobtoid.3*
|
|
|
|
|
%{_mandir}/man3/portof.3*
|
|
|
|
|
%{_mandir}/man3/prng.3*
|
|
|
|
|
%{_mandir}/man3/rangetosubnet.3*
|
|
|
|
|
%{_mandir}/man3/sameaddr.3*
|
|
|
|
|
%{_mandir}/man3/subnetof.3*
|
|
|
|
|
%{_mandir}/man3/ttoaddr.3*
|
|
|
|
|
%{_mandir}/man3/ttodata.3*
|
|
|
|
|
%{_mandir}/man3/ttosa.3*
|
|
|
|
|
%{_mandir}/man3/ttoul.3*
|
|
|
|
|
%{_mandir}/man8/_copyright.8*
|
|
|
|
|
%{_mandir}/man8/_updown.8*
|
|
|
|
|
%{_mandir}/man8/_updown_espmark.8*
|
|
|
|
|
%{_mandir}/man8/openac.8*
|
|
|
|
|
%{_mandir}/man8/pluto.8*
|
|
|
|
|
%{_mandir}/man8/scepclient.8*
|
|
|
|
|
%{_mandir}/man8/starter.8*
|
2008-02-19 14:17:02 +01:00
|
|
|
|
- Updated to strongSwan 4.4.0 release, changes since 4.3.6 are:
* The IKEv2 High Availability plugin has been integrated. It
provides load sharing and failover capabilities in a cluster of
currently two nodes, based on an extend ClusterIP kernel module.
More information is available at
http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
The development of the High Availability functionality was sponsored
by secunet Security Networks AG.
* Added IKEv1 and IKEv2 configuration support for the AES-GMAC
authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
2.6.34 kernel is required to make AES-GMAC available via the XFRM
kernel interface.
* Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp,
gcrypt and openssl plugins, usable by both pluto and charon. The new
proposal keywords are modp1024s160, modp2048s224 and modp2048s256.
Thanks to Joy Latten from IBM for her contribution.
* The IKEv1 pluto daemon supports RAM-based virtual IP pools using
the rightsourceip directive with a subnet from which addresses
are allocated.
* The ipsec pki --gen and --pub commands now allow the output of
private and public keys in PEM format using the --outform pem
command line option.
* The new DHCP plugin queries virtual IP addresses for clients from
a DHCP server using broadcasts, or a defined server using the
charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server
information is additionally served to clients if the DHCP server
provides such information. The plugin is used in ipsec.conf
configurations having rightsourceip set to %dhcp.
* A new plugin called farp fakes ARP responses for virtual IP
addresses handed out to clients from the IKEv2 daemon charon. The
plugin lets a road-warrior act as a client on the local LAN if it
uses a virtual IP from the responders subnet, e.g. acquired using
the DHCP plugin.
* The existing IKEv2 socket implementations have been migrated to
the socket-default and the socket-raw plugins. The new
socket-dynamic plugin binds sockets dynamically to ports configured
via the left-/rightikeport ipsec.conf connection parameters.
* The android charon plugin stores received DNS server information
as "net.dns" system properties, as used by the Android platform.
- Splitted package into strongswan-ipsec, that install the traditional
ipsec service starter scripts, -ikev1 and -ikev2 installing daemons
and -libs0, that contains the library and plugins.
- Enabled NetworkManager, dhcp, farp, ha and socket-dynamic plugins,
with NetworkManager plugin in a separate strongswan-nm package.
OBS-URL: https://build.opensuse.org/package/show/network:vpn/strongswan?expand=0&rev=10
2010-05-14 17:10:14 +02:00
|
|
|
%files libs0
|
|
|
|
|
%defattr(-,root,root)
|
|
|
|
|
%config(noreplace) %attr(600,root,root) %{_sysconfdir}/strongswan.conf
|
|
|
|
|
%{_libdir}/libhydra.so.0
|
|
|
|
|
%{_libdir}/libhydra.so.0.0.0
|
|
|
|
|
%{_libdir}/libcharon.so.0
|
|
|
|
|
%{_libdir}/libcharon.so.0.0.0
|
|
|
|
|
%{_libdir}/libstrongswan.so.0
|
|
|
|
|
%{_libdir}/libstrongswan.so.0.0.0
|
|
|
|
|
%dir %{_libexecdir}/ipsec
|
|
|
|
|
%dir %{_libexecdir}/ipsec/pool
|
|
|
|
|
%dir %{_libexecdir}/ipsec/plugins
|
|
|
|
|
%{_libexecdir}/ipsec/libchecksum.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-aes.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-attr.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-curl.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-des.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-fips-prf.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-gcrypt.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-gmp.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-hmac.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-kernel-netlink.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-ldap.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-md5.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-openssl.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-pubkey.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-random.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-resolve.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-sha1.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-sha2.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-x509.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-xcbc.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-dnskey.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-pem.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-pgp.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-pkcs1.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-socket-dynamic.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-socket-raw.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-attr-sql.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-dhcp.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-farp.so
|
|
|
|
|
%{_libexecdir}/ipsec/plugins/libstrongswan-ha.so
|
|
|
|
|
%dir %ghost %{_localstatedir}/run/strongswan
|
|
|
|
|
|
|
|
|
|
|
2007-12-13 04:49:24 +01:00
|
|
|
%changelog
|
