1
0
suse-module-tools/suse-module-tools.spec
Martin Wilck 597ba7391d - Update to version 15.0.20 (git a2e213d):
- Fix driver-check.sh (boo#1123697, boo#1123704)
- add /etc/modprobe.d/50-blacklist.conf from sysconfig package
  (boo#1107611)
- add file system blacklist file (fate#326832)
- Remove hard dependency on mkinitrd (boo#1123721)
- Make sure code works also without kmod-compat
- Replace file dependency on /sbin/depmod by weak package dependency

OBS-URL: https://build.opensuse.org/package/show/Base:System/suse-module-tools?expand=0&rev=53
2019-01-30 17:01:31 +00:00

221 lines
7.4 KiB
RPMSpec

#
# spec file for package suse-module-tools
#
# Copyright (c) 2019 SUSE LINUX GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via https://bugs.opensuse.org/
#
Name: suse-module-tools
Version: 15.0.20
Release: 0
Summary: Configuration for module loading and SUSE-specific utilities for KMPs
License: GPL-2.0-or-later
Group: System/Base
Url: https://github.com/openSUSE/suse-module-tools
Source0: %{name}-%{version}.tar.xz
Source1: %{name}.rpmlintrc
Requires: coreutils
Requires: findutils
Requires: grep
Requires: gzip
Requires: rpm
Requires: sed
# Use weak dependencies for mkinitrd and kmod in order to
# keep Ring0 lean. In normal deployments, these packages
# will be available anyway.
Recommends: mkinitrd
%if 0%{?suse_version} >= 1315
Recommends: kmod
%else
Recommends: modutils
%endif
%description
This package contains helper scripts for KMP installation and
uninstallation, as well as default configuration files for depmod and
modprobe. These utilities are provided by kmod-compat or
module-init-tools, whichever implementation you choose to install.
%package legacy
Summary: Legacy "weak-modules" script for Code10
Group: System/Base
Requires: %{name}
Requires: binutils
%description legacy
This package contains the legacy "weak-modules" script for kernel
module package (KMP) support. It was replaced by "weak-modules2" in
SLE 11 and later.
%prep
%setup -q
%build
%if 0%{?is_opensuse} == 0
sed -ri 's/^( *allow_unsupported_modules *) 1/\1 0/' \
10-unsupported-modules.conf
%endif
%install
# now assemble the parts for modprobe.conf
cp modprobe.conf/modprobe.conf.common 00-system.conf
if [ -f "modprobe.conf/modprobe.conf.$RPM_ARCH" ]; then
cat "modprobe.conf/modprobe.conf.$RPM_ARCH" >>00-system.conf
fi
install -d -m 755 "%{buildroot}%{_sysconfdir}/modprobe.d"
install -pm644 "10-unsupported-modules.conf" \
"%{buildroot}%{_sysconfdir}/modprobe.d/"
install -pm644 00-system.conf "%{buildroot}%{_sysconfdir}/modprobe.d/"
%if 0%{?suse_version} >= 1500
install -pm644 modprobe.conf/modprobe.conf.blacklist "%{buildroot}%{_sysconfdir}/modprobe.d/50-blacklist.conf"
%if !0%{?is_opensuse}
install -pm644 modprobe.conf/modprobe.conf.fs-blacklist "%{buildroot}%{_sysconfdir}/modprobe.d/60-filesystem-blacklist.conf"
%endif
%endif
install -pm644 modprobe.conf/modprobe.conf.local "%{buildroot}%{_sysconfdir}/modprobe.d/99-local.conf"
install -d -m 755 "%{buildroot}%{_sysconfdir}/depmod.d"
install -pm 644 "depmod-00-system.conf" \
"%{buildroot}%{_sysconfdir}/depmod.d/00-system.conf"
# "module-init-tools" name hardcoded in KMPs, mkinitrd, etc.
install -d -m 755 "%{buildroot}%{_libexecdir}/module-init-tools"
install -pm 755 weak-modules{,2} "%{buildroot}%{_libexecdir}/module-init-tools/"
install -pm 755 driver-check.sh "%{buildroot}%{_libexecdir}/module-init-tools/"
# rpm macros and helper
install -d -m 755 "%{buildroot}%{_sysconfdir}/rpm"
install -pm 644 "macros.initrd" "%{buildroot}%{_sysconfdir}/rpm/"
install -pm 755 "regenerate-initrd-posttrans" "%{buildroot}%{_libexecdir}/module-init-tools/"
install -d -m 755 "%{buildroot}%{_prefix}/bin"
install -pm 755 kmp-install "%{buildroot}%{_bindir}/"
# modhash for calculating hash of signed kernel module
install -pm 755 modhash "%{buildroot}%{_bindir}/"
# systemd service to load /boot/sysctl.conf-`uname -r`
install -d -m 755 "%{buildroot}%{_libexecdir}/systemd/system/systemd-sysctl.service.d"
install -pm 644 50-kernel-uname_r.conf "%{buildroot}%{_libexecdir}/systemd/system/systemd-sysctl.service.d"
# Ensure that the sg driver is loaded early (bsc#1036463)
# Not needed in SLE11, where sg is loaded via udev rule.
install -d -m 755 "%{buildroot}%{_sysconfdir}/modules-load.d"
install -pm 644 sg.conf "%{buildroot}%{_sysconfdir}/modules-load.d"
mkdir -p %{buildroot}%{_defaultlicensedir}
%post
%if 0%{?sle_version} >= 150000
# Delete obsolete unsupported-modules file from SLE11
rm -f %{_sysconfdir}/modprobe.d/unsupported-modules
%else
# Logic for releases below CODE 15
%if 0%{?is_opensuse} == 1
allowed=1
%else
allowed=0
%endif
test_allow_on_install()
{
# configure handling of unsupported modules
# default is to allow them
allow=1
# if the obsolete LOAD_UNSUPPORTED_MODULES_AUTOMATICALLY variable is
# set to no, don't allow (this was used in SLES 9 and 10)
if test -e %{_sysconfdir}/sysconfig/hardware/config; then
. %{_sysconfdir}/sysconfig/hardware/config
if test "x$LOAD_UNSUPPORTED_MODULES_AUTOMATICALLY" = "xno"; then
allow=0
fi
# obsolete
rm %{_sysconfdir}/sysconfig/hardware/config
fi
# don't change the setting during upgrade
if test "$1" != 1; then
allow=
return
fi
# on SLES, the default is not to allow unsupported modules
if grep -qs "Enterprise Server" %{_sysconfdir}/os-release; then
allow=0
else
return
fi
# unless the admin passed "oem-modules=1" to the kernel during install
if grep -qs '\<oem-modules=1\>' /proc/cmdline; then
allow=1
return
fi
# or if the installer already loaded some unsupported modules
# (see TAINT_NO_SUPPORT in /etc/src/linux/include/linux/kernel.h)
tainted=$(cat /proc/sys/kernel/tainted 2>/dev/null || echo 0)
if test $((tainted & (1<<30))) != 0; then
allow=1
return
fi
}
# upgrade from old locations
if test -e %{_sysconfdir}/modprobe.d/unsupported-modules; then
mv -f %{_sysconfdir}/modprobe.d/unsupported-modules \
%{_sysconfdir}/modprobe.d/10-unsupported-modules.conf
fi
test_allow_on_install "$@"
if test -n "$allow" -a "$allow" != "$allowed"; then
sed -ri 's/^( *allow_unsupported_modules *) [01]/\1 '"$allow"'/' \
%{_sysconfdir}/modprobe.d/10-unsupported-modules.conf
fi
%endif
# upgrade from old locations
if test -e %{_sysconfdir}/modprobe.conf.local; then
mv -f %{_sysconfdir}/modprobe.conf.local \
%{_sysconfdir}/modprobe.d/99-local.conf
fi
%files
%defattr(-,root,root)
%if 0%{?sle_version:%{sle_version}}%{!?sle_version:150000} <= 120200
%dir %{_defaultlicensedir}
%endif
%license LICENSE
%doc README.SUSE
%dir %{_sysconfdir}/modprobe.d
%config %{_sysconfdir}/modprobe.d/00-system.conf
%config(noreplace) %{_sysconfdir}/modprobe.d/10-unsupported-modules.conf
%if 0%{?suse_version} >= 1500
%config(noreplace) %{_sysconfdir}/modprobe.d/50-blacklist.conf
%if !0%{?is_opensuse}
%config(noreplace) %{_sysconfdir}/modprobe.d/60-filesystem-blacklist.conf
%endif
%endif
%config(noreplace) %{_sysconfdir}/modprobe.d/99-local.conf
%dir %{_sysconfdir}/depmod.d
%config %{_sysconfdir}/depmod.d/00-system.conf
%config %{_sysconfdir}/rpm/macros.initrd
%{_bindir}/modhash
%{_bindir}/kmp-install
%{_libexecdir}/module-init-tools
%exclude %{_libexecdir}/module-init-tools/weak-modules
%{_libexecdir}/systemd/system/systemd-sysctl.service.d
%dir %{_sysconfdir}/modules-load.d
%config(noreplace) %{_sysconfdir}/modules-load.d/sg.conf
%files legacy
%defattr(-,root,root)
%{_libexecdir}/module-init-tools/weak-modules
%changelog