Accepting request 607419 from hardware👢staging

- Conditionalize pine64plus ATF support on uboot_atf_pine64
- u-boot-board.spec.in: Update license
- Add poplar
- Update to 2018.05
- Update to 2018.05-rc3
- Include u-boot.spec in autogeneration logic
- Add support for .bif generation in mkimage
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2018.05
* Patches added:
  0006-tools-zynqmpimage-Add-partition-rea.patch
  0007-tools-zynqmpimage-Move-defines-to-h.patch
  0008-MAINTAINERS-Declare-tools-zynq-.-c-.patch
  0009-tools-zynqmpimage-Add-bif-support.patch
  0010-tools-zynqmpbif-Add-support-for-loa.patch
- Add generic ZynqMP support
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2018.05
* Patches added:
  0005-zynqmp-Add-generic-target.patch
- Update to 2018.05-rc2
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2018.05
* Patches dropped:
  0004-rpi3-Enable-lan78xx-driver.patch
  0005-rpi-Add-identifier-for-the-new-RPi3.patch
  0006-efi_loader-Fix-network-DP-with-DM_E.patch
  0007-mkimage-do-not-fail-if-there-is-no-.patch
  0008-rpi-Allow-to-boot-without-serial.patch
  0009-mmc-use-core-clock-frequency-in-bcm.patch
  0010-Temp-workaround-for-Chromebook-snow.patch
* Patches added:
  0004-Temp-workaround-for-Chromebook-snow.patch
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2018.05
* Patches added:
  0010-Temp-workaround-for-Chromebook-snow.patch
  
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2018.05
* Patches dropped:
  0009-rpi-Allow-to-boot-without-serial.patch
  0010-mmc-use-core-clock-frequency-in-bcm.patch
* Patches added:
  0008-rpi-Allow-to-boot-without-serial.patch
  0009-mmc-use-core-clock-frequency-in-bcm.patch
    
- Update to 2018.05-rc1
- Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed-2018.05
* Patches dropped:
  0003-Revert-rockchip-mkimage-remove-plac.patch
  0004-rpi-Use-firmware-provided-device-tr.patch
  0005-rpi3-Enable-lan78xx-driver.patch
  0006-net-Only-access-network-devices-aft.patch
  0007-rpi-Add-identifier-for-the-new-RPi3.patch
  0008-efi_loader-Fix-network-DP-with-DM_E.patch
* Patches added:
  0003-rpi-Use-firmware-provided-device-tr.patch
  0004-rpi3-Enable-lan78xx-driver.patch
  0005-rpi-Add-identifier-for-the-new-RPi3.patch
  0006-efi_loader-Fix-network-DP-with-DM_E.patch
  0007-mkimage-do-not-fail-if-there-is-no-.patch

OBS-URL: https://build.opensuse.org/request/show/607419
OBS-URL: https://build.opensuse.org/package/show/hardware:boot/u-boot?expand=0&rev=16

u-boot.spec

@@ -19,10 +19,10 @@
 
 
 # 'archive_version' differs from 'version' for RC version only
-%define archive_version 2018.03
+%define archive_version 2018.05
 
 Name:           u-boot
-Version:        2018.03
+Version:        2018.05
 Release:        0
 Summary:        Tools for the U-Boot Firmware
 License:        GPL-2.0-only
@@ -30,6 +30,16 @@ Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-%{archive_version}.tar.bz2
 Source1:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{archive_version}.tar.bz2.sig
+Patch0001:      0001-XXX-openSUSE-XXX-Load-dtb-from-part.patch
+Patch0002:      0002-Revert-Revert-omap3-Use-raw-SPL-by-.patch
+Patch0003:      0003-rpi-Use-firmware-provided-device-tr.patch
+Patch0004:      0004-Temp-workaround-for-Chromebook-snow.patch
+Patch0005:      0005-zynqmp-Add-generic-target.patch
+Patch0006:      0006-tools-zynqmpimage-Add-partition-rea.patch
+Patch0007:      0007-tools-zynqmpimage-Move-defines-to-h.patch
+Patch0008:      0008-MAINTAINERS-Declare-tools-zynq-.-c-.patch
+Patch0009:      0009-tools-zynqmpimage-Add-bif-support.patch
+Patch0010:      0010-tools-zynqmpbif-Add-support-for-loa.patch
 BuildRequires:  libopenssl-devel
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 
@@ -50,6 +60,16 @@ mkimage- a tool that creates kernel bootable images for U-Boot.
 
 %prep
 %setup -q -n u-boot-%{archive_version}
+%patch0001 -p1
+%patch0002 -p1
+%patch0003 -p1
+%patch0004 -p1
+%patch0005 -p1
+%patch0006 -p1
+%patch0007 -p1
+%patch0008 -p1
+%patch0009 -p1
+%patch0010 -p1
 
 %build
 # needed for include/config/auto.conf