Accepting request 254775 from Base:System

Update

OBS-URL: https://build.opensuse.org/request/show/254775
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/u-boot?expand=0&rev=30

add_spl_extfs_support.patch

@@ -1,38 +1,538 @@
---- ./include/spl.h.orig	2014-08-21 09:49:13.104157699 +0200
+From c1da5660a00d1169e0d07efae0e699294dcb298b Mon Sep 17 00:00:00 2001
-+++ ./include/spl.h	2014-08-21 09:49:55.343156204 +0200
+From: Guillaume GARDET <guillaume.gardet@free.fr>
-@@ -72,6 +72,10 @@ void spl_sata_load_image(void);
+Date: Fri, 19 Sep 2014 10:03:45 +0200
- int spl_load_image_fat(block_dev_desc_t *block_dev, int partition, const char *filename);
+Subject: [PATCH 1/5] Rename some defines containing FAT in their name to be
- int spl_load_image_fat_os(block_dev_desc_t *block_dev, int partition);
+ filesystem generic MMCSD_MODE_FAT => MMCSD_MODE_FS
- 
+ CONFIG_SPL_FAT_LOAD_ARGS_NAME => CONFIG_SPL_FS_LOAD_ARGS_NAME
-+/* SPL EXT image functions */
+ CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME => CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
-+int spl_load_image_ext(block_dev_desc_t *block_dev, int partition, const char *filename);
+ CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION => CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION
-+int spl_load_image_ext_os(block_dev_desc_t *block_dev, int partition);
+
-+
+---
- #ifdef CONFIG_SPL_BOARD_INIT
+ arch/arm/cpu/arm1136/mx35/generic.c          | 2 +-
- void spl_board_init(void);
+ arch/arm/cpu/armv7/omap-common/boot-common.c | 4 ++--
+ arch/arm/cpu/armv7/omap3/board.c             | 2 +-
+ arch/arm/cpu/armv7/zynq/spl.c                | 2 +-
+ arch/arm/cpu/at91-common/spl.c               | 2 +-
+ arch/arm/imx-common/spl.c                    | 2 +-
+ common/spl/spl_fat.c                         | 6 +++---
+ common/spl/spl_mmc.c                         | 8 ++++----
+ common/spl/spl_sata.c                        | 2 +-
+ common/spl/spl_usb.c                         | 2 +-
+ include/configs/am3517_crane.h               | 4 ++--
+ include/configs/am3517_evm.h                 | 4 ++--
+ include/configs/cm_t35.h                     | 4 ++--
+ include/configs/devkit8000.h                 | 8 ++++----
+ include/configs/imx6_spl.h                   | 4 ++--
+ include/configs/mcx.h                        | 4 ++--
+ include/configs/omap3_evm.h                  | 4 ++--
+ include/configs/omap3_evm_quick_mmc.h        | 4 ++--
+ include/configs/sama5d3_xplained.h           | 4 ++--
+ include/configs/sama5d3xek.h                 | 4 ++--
+ include/configs/siemens-am33x-common.h       | 4 ++--
+ include/configs/tao3530.h                    | 4 ++--
+ include/configs/ti814x_evm.h                 | 4 ++--
+ include/configs/ti816x_evm.h                 | 4 ++--
+ include/configs/ti_armv7_common.h            | 8 ++++----
+ include/configs/tricorder.h                  | 4 ++--
+ include/configs/zynq-common.h                | 8 ++++----
+ include/spl.h                                | 2 +-
+ 28 files changed, 57 insertions(+), 57 deletions(-)
+
+diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c
+index 8d3f92c..bc98edd 100644
+--- a/arch/arm/cpu/arm1136/mx35/generic.c
++++ b/arch/arm/cpu/arm1136/mx35/generic.c
+@@ -531,7 +531,7 @@ u32 spl_boot_mode(void)
+ 	switch (spl_boot_device()) {
+ 	case BOOT_DEVICE_MMC1:
+ #ifdef CONFIG_SPL_FAT_SUPPORT
+-		return MMCSD_MODE_FAT;
++		return MMCSD_MODE_FS;
+ #else
+ 		return MMCSD_MODE_RAW;
  #endif
---- ./common/spl/Makefile.orig	2014-08-21 09:55:50.011143645 +0200
+diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
-+++ ./common/spl/Makefile	2014-08-21 09:56:05.061143112 +0200
+index 3033564..fb535eb 100644
-@@ -18,5 +18,6 @@ obj-$(CONFIG_SPL_NET_SUPPORT) += spl_net
+--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
++++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
+@@ -81,8 +81,8 @@ u32 spl_boot_mode(void)
+ 
+ 	if (val == MMCSD_MODE_RAW)
+ 		return MMCSD_MODE_RAW;
+-	else if (val == MMCSD_MODE_FAT)
+-		return MMCSD_MODE_FAT;
++	else if (val == MMCSD_MODE_FS)
++		return MMCSD_MODE_FS;
+ 	else
+ #ifdef CONFIG_SUPPORT_EMMC_BOOT
+ 		return MMCSD_MODE_EMMCBOOT;
+diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
+index 667e77f..9bcca9d 100644
+--- a/arch/arm/cpu/armv7/omap3/board.c
++++ b/arch/arm/cpu/armv7/omap3/board.c
+@@ -65,7 +65,7 @@ u32 spl_boot_mode(void)
+ 	case BOOT_DEVICE_MMC2:
+ 		return MMCSD_MODE_RAW;
+ 	case BOOT_DEVICE_MMC1:
+-		return MMCSD_MODE_FAT;
++		return MMCSD_MODE_FS;
+ 		break;
+ 	default:
+ 		puts("spl: ERROR:  unknown device - can't select boot mode\n");
+diff --git a/arch/arm/cpu/armv7/zynq/spl.c b/arch/arm/cpu/armv7/zynq/spl.c
+index 9ff2ef2..31627f9 100644
+--- a/arch/arm/cpu/armv7/zynq/spl.c
++++ b/arch/arm/cpu/armv7/zynq/spl.c
+@@ -63,7 +63,7 @@ u32 spl_boot_device(void)
+ #ifdef CONFIG_SPL_MMC_SUPPORT
+ u32 spl_boot_mode(void)
+ {
+-	return MMCSD_MODE_FAT;
++	return MMCSD_MODE_FS;
+ }
+ #endif
+ 
+diff --git a/arch/arm/cpu/at91-common/spl.c b/arch/arm/cpu/at91-common/spl.c
+index cbb5a52..674a470 100644
+--- a/arch/arm/cpu/at91-common/spl.c
++++ b/arch/arm/cpu/at91-common/spl.c
+@@ -102,7 +102,7 @@ u32 spl_boot_mode(void)
+ 	switch (spl_boot_device()) {
+ #ifdef CONFIG_SYS_USE_MMC
+ 	case BOOT_DEVICE_MMC1:
+-		return MMCSD_MODE_FAT;
++		return MMCSD_MODE_FS;
+ 		break;
+ #endif
+ 	case BOOT_DEVICE_NONE:
+diff --git a/arch/arm/imx-common/spl.c b/arch/arm/imx-common/spl.c
+index 9a02a64..9d3c31a 100644
+--- a/arch/arm/imx-common/spl.c
++++ b/arch/arm/imx-common/spl.c
+@@ -68,7 +68,7 @@ u32 spl_boot_mode(void)
+ 	case BOOT_DEVICE_MMC1:
+ 	case BOOT_DEVICE_MMC2:
+ #ifdef CONFIG_SPL_FAT_SUPPORT
+-		return MMCSD_MODE_FAT;
++		return MMCSD_MODE_FS;
+ #else
+ 		return MMCSD_MODE_RAW;
+ #endif
+diff --git a/common/spl/spl_fat.c b/common/spl/spl_fat.c
+index 56be943..91481fc 100644
+--- a/common/spl/spl_fat.c
++++ b/common/spl/spl_fat.c
+@@ -106,18 +106,18 @@ int spl_load_image_fat_os(block_dev_desc_t *block_dev, int partition)
+ defaults:
+ #endif
+ 
+-	err = file_fat_read(CONFIG_SPL_FAT_LOAD_ARGS_NAME,
++	err = file_fat_read(CONFIG_SPL_FS_LOAD_ARGS_NAME,
+ 			    (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0);
+ 	if (err <= 0) {
+ #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
+ 		printf("%s: error reading image %s, err - %d\n",
+-		       __func__, CONFIG_SPL_FAT_LOAD_ARGS_NAME, err);
++		       __func__, CONFIG_SPL_FS_LOAD_ARGS_NAME, err);
+ #endif
+ 		return -1;
+ 	}
+ 
+ 	return spl_load_image_fat(block_dev, partition,
+-			CONFIG_SPL_FAT_LOAD_KERNEL_NAME);
++			CONFIG_SPL_FS_LOAD_KERNEL_NAME);
+ }
+ #endif
+ #endif
+diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
+index fa6f891..a631e0a 100644
+--- a/common/spl/spl_mmc.c
++++ b/common/spl/spl_mmc.c
+@@ -101,15 +101,15 @@ void spl_mmc_load_image(void)
+ 		err = mmc_load_image_raw(mmc,
+ 			CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
+ #ifdef CONFIG_SPL_FAT_SUPPORT
+-	} else if (boot_mode == MMCSD_MODE_FAT) {
++	} else if (boot_mode == MMCSD_MODE_FS) {
+ 		debug("boot mode - FAT\n");
+ #ifdef CONFIG_SPL_OS_BOOT
+ 		if (spl_start_uboot() || spl_load_image_fat_os(&mmc->block_dev,
+-								CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION))
++								CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION))
+ #endif
+ 		err = spl_load_image_fat(&mmc->block_dev,
+-					CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION,
+-					CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
++					CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION,
++					CONFIG_SPL_FS_LOAD_PAYLOAD_NAME);
+ #endif
+ #ifdef CONFIG_SUPPORT_EMMC_BOOT
+ 	} else if (boot_mode == MMCSD_MODE_EMMCBOOT) {
+diff --git a/common/spl/spl_sata.c b/common/spl/spl_sata.c
+index 2e7adca..6fd1b79 100644
+--- a/common/spl/spl_sata.c
++++ b/common/spl/spl_sata.c
+@@ -41,7 +41,7 @@ void spl_sata_load_image(void)
+ #endif
+ 	err = spl_load_image_fat(stor_dev,
+ 				CONFIG_SYS_SATA_FAT_BOOT_PARTITION,
+-				CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
++				CONFIG_SPL_FS_LOAD_PAYLOAD_NAME);
+ 	if (err) {
+ 		puts("Error loading sata device\n");
+ 		hang();
+diff --git a/common/spl/spl_usb.c b/common/spl/spl_usb.c
+index 53a9043..c81672b 100644
+--- a/common/spl/spl_usb.c
++++ b/common/spl/spl_usb.c
+@@ -49,7 +49,7 @@ void spl_usb_load_image(void)
+ #endif
+ 		err = spl_load_image_fat(stor_dev,
+ 				CONFIG_SYS_USB_FAT_BOOT_PARTITION,
+-				CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
++				CONFIG_SPL_FS_LOAD_PAYLOAD_NAME);
+ 
+ 		if (err) {
+ 			puts("Error loading USB device\n");
+diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
+index fcb4033..0fbfa3f 100644
+--- a/include/configs/am3517_crane.h
++++ b/include/configs/am3517_crane.h
+@@ -304,8 +304,8 @@
+ 
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
+ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
+ 
+ #define CONFIG_SPL_LIBCOMMON_SUPPORT
+ #define CONFIG_SPL_LIBDISK_SUPPORT
+diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
+index c5d64ca..8719f76 100644
+--- a/include/configs/am3517_evm.h
++++ b/include/configs/am3517_evm.h
+@@ -313,8 +313,8 @@
+ 
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
+ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
+ 
+ #define CONFIG_SPL_LIBCOMMON_SUPPORT
+ #define CONFIG_SPL_LIBDISK_SUPPORT
+diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
+index 6f4d97f..1919cde 100644
+--- a/include/configs/cm_t35.h
++++ b/include/configs/cm_t35.h
+@@ -321,8 +321,8 @@
+ 
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
+ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
+ 
+ #define CONFIG_SPL_BOARD_INIT
+ #define CONFIG_SPL_LIBCOMMON_SUPPORT
+diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
+index 7ab6d51..ca62461 100644
+--- a/include/configs/devkit8000.h
++++ b/include/configs/devkit8000.h
+@@ -298,8 +298,8 @@
+ #define CONFIG_SPL_MMC_SUPPORT
+ #define CONFIG_SPL_FAT_SUPPORT
+ #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION    1
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+ 
+ #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
+@@ -341,8 +341,8 @@
+ 					0x400000)
+ #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
+ 
+-#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME		"uImage"
+-#define CONFIG_SPL_FAT_LOAD_ARGS_NAME		"args"
++#define CONFIG_SPL_FS_LOAD_KERNEL_NAME		"uImage"
++#define CONFIG_SPL_FS_LOAD_ARGS_NAME		"args"
+ 
+ #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x500 /* address 0xa0000 */
+ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x8   /* address 0x1000 */
+diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
+index 970460d..308e520 100644
+--- a/include/configs/imx6_spl.h
++++ b/include/configs/imx6_spl.h
+@@ -46,7 +46,7 @@
+ #if defined(CONFIG_SPL_MMC_SUPPORT)
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	138 /* offset 69KB */
+ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	800 /* 400 KB */
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
+ #define CONFIG_SYS_MONITOR_LEN  (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS/2*1024)
+ #endif
+ 
+@@ -58,7 +58,7 @@
+ 
+ /* Define the payload for FAT/EXT support */
+ #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME  "u-boot.img"
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME  "u-boot.img"
+ #define CONFIG_SPL_LIBDISK_SUPPORT
+ #endif
+ 
+diff --git a/include/configs/mcx.h b/include/configs/mcx.h
+index cd85a6c..adaf44f 100644
+--- a/include/configs/mcx.h
++++ b/include/configs/mcx.h
+@@ -372,8 +372,8 @@
+ #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+ 
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
+ 
+ /* NAND boot config */
+ #define CONFIG_SYS_NAND_PAGE_COUNT	64
+diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
+index b7638fb..27bf89c 100644
+--- a/include/configs/omap3_evm.h
++++ b/include/configs/omap3_evm.h
+@@ -75,8 +75,8 @@
+ #define CONFIG_SPL_FAT_SUPPORT
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
+ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
+ 
+ /* Partition tables */
+ #define CONFIG_EFI_PARTITION
+diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h
+index 50929aa..2daf13c 100644
+--- a/include/configs/omap3_evm_quick_mmc.h
++++ b/include/configs/omap3_evm_quick_mmc.h
+@@ -87,7 +87,7 @@
+ #define CONFIG_SPL_FAT_SUPPORT
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
+ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
+ 
+ #endif /* __OMAP3_EVM_QUICK_MMC_H */
+diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
+index 0dfb7e7..5b77db2 100644
+--- a/include/configs/sama5d3_xplained.h
++++ b/include/configs/sama5d3_xplained.h
+@@ -230,8 +230,8 @@
+ #define CONFIG_SPL_MMC_SUPPORT
+ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
+ #define CONFIG_SPL_FAT_SUPPORT
+ #define CONFIG_SPL_LIBDISK_SUPPORT
+ 
+diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
+index c46baf2..dfbf3cb 100644
+--- a/include/configs/sama5d3xek.h
++++ b/include/configs/sama5d3xek.h
+@@ -276,8 +276,8 @@
+ #define CONFIG_SPL_MMC_SUPPORT
+ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
+ #define CONFIG_SPL_FAT_SUPPORT
+ #define CONFIG_SPL_LIBDISK_SUPPORT
+ 
+diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
+index 1ce0965..0d5dba1 100644
+--- a/include/configs/siemens-am33x-common.h
++++ b/include/configs/siemens-am33x-common.h
+@@ -148,8 +148,8 @@
+ #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
+ 
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
+ #define CONFIG_SPL_MMC_SUPPORT
+ #define CONFIG_SPL_FAT_SUPPORT
+ #define CONFIG_FS_FAT
+diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
+index 8d2db27..d687717 100644
+--- a/include/configs/tao3530.h
++++ b/include/configs/tao3530.h
+@@ -305,8 +305,8 @@
+ 
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
+ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
+ 
+ #define CONFIG_SPL_BOARD_INIT
+ #define CONFIG_SPL_LIBCOMMON_SUPPORT
+diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
+index a55bde2..2fddef3 100644
+--- a/include/configs/ti814x_evm.h
++++ b/include/configs/ti814x_evm.h
+@@ -178,8 +178,8 @@
+ 
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION    1
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
+ #define CONFIG_SPL_MMC_SUPPORT
+ #define CONFIG_SPL_FAT_SUPPORT
+ 
+diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
+index e86c364..aeabb1b 100644
+--- a/include/configs/ti816x_evm.h
++++ b/include/configs/ti816x_evm.h
+@@ -144,8 +144,8 @@
+ 
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION    1
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
+ #define CONFIG_SPL_MMC_SUPPORT
+ #define CONFIG_SPL_FAT_SUPPORT
+ 
+diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
+index 85171db..4b9b629 100644
+--- a/include/configs/ti_armv7_common.h
++++ b/include/configs/ti_armv7_common.h
+@@ -232,13 +232,13 @@
+ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
+ 
+ /* FAT sd card locations. */
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION	1
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
+ 
+ #ifdef CONFIG_SPL_OS_BOOT
+ /* FAT */
+-#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME		"uImage"
+-#define CONFIG_SPL_FAT_LOAD_ARGS_NAME		"args"
++#define CONFIG_SPL_FS_LOAD_KERNEL_NAME		"uImage"
++#define CONFIG_SPL_FS_LOAD_ARGS_NAME		"args"
+ 
+ /* RAW SD card / eMMC */
+ #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x900	/* address 0x120000 */
+diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
+index 6ddf3d5..6e7a7fb 100644
+--- a/include/configs/tricorder.h
++++ b/include/configs/tricorder.h
+@@ -348,8 +348,8 @@
+ #define CONFIG_SPL_MMC_SUPPORT
+ #define CONFIG_SPL_FAT_SUPPORT
+ #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION    1
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+ 
+ #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
+diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
+index 0b4dd66..2bc1562 100644
+--- a/include/configs/zynq-common.h
++++ b/include/configs/zynq-common.h
+@@ -268,10 +268,10 @@
+ #define CONFIG_SPL_MMC_SUPPORT
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
+-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
++#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION    1
+ #define CONFIG_SPL_LIBDISK_SUPPORT
+ #define CONFIG_SPL_FAT_SUPPORT
+-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME     "u-boot-dtb.img"
++#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot-dtb.img"
+ #endif
+ 
+ /* Disable dcache for SPL just for sure */
+@@ -283,8 +283,8 @@
+ /* Address in RAM where the parameters must be copied by SPL. */
+ #define CONFIG_SYS_SPL_ARGS_ADDR	0x10000000
+ 
+-#define CONFIG_SPL_FAT_LOAD_ARGS_NAME		"system.dtb"
+-#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME		"uImage"
++#define CONFIG_SPL_FS_LOAD_ARGS_NAME		"system.dtb"
++#define CONFIG_SPL_FS_LOAD_KERNEL_NAME		"uImage"
+ 
+ /* Not using MMC raw mode - just for compilation purpose */
+ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0
+diff --git a/include/spl.h b/include/spl.h
+index a7e41da..58c81dc 100644
+--- a/include/spl.h
++++ b/include/spl.h
+@@ -15,7 +15,7 @@
+ /* Boot type */
+ #define MMCSD_MODE_UNDEFINED	0
+ #define MMCSD_MODE_RAW		1
+-#define MMCSD_MODE_FAT		2
++#define MMCSD_MODE_FS		2
+ #define MMCSD_MODE_EMMCBOOT	3
+ 
+ struct spl_image_info {
+-- 
+1.8.4.5
+
+From 3f3d987e1c43205424ab3e6e5128517c97307386 Mon Sep 17 00:00:00 2001
+From: Guillaume GARDET <guillaume.gardet@free.fr>
+Date: Fri, 19 Sep 2014 10:06:33 +0200
+Subject: [PATCH 2/5] spl: Add EXT support to SPL
+
+---
+ common/spl/Makefile  |   1 +
+ common/spl/spl_ext.c | 138 +++++++++++++++++++++++++++++++++++++++++++++++++++
+ common/spl/spl_mmc.c |  18 ++++++-
+ fs/Makefile          |   1 +
+ include/spl.h        |   4 ++
+ 5 files changed, 160 insertions(+), 2 deletions(-)
+ create mode 100644 common/spl/spl_ext.c
+
+diff --git a/common/spl/Makefile b/common/spl/Makefile
+index 64569c2..10a4589 100644
+--- a/common/spl/Makefile
++++ b/common/spl/Makefile
+@@ -18,5 +18,6 @@ obj-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o
  obj-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc.o
  obj-$(CONFIG_SPL_USB_SUPPORT) += spl_usb.o
  obj-$(CONFIG_SPL_FAT_SUPPORT) += spl_fat.o
 +obj-$(CONFIG_SPL_EXT_SUPPORT) += spl_ext.o
  obj-$(CONFIG_SPL_SATA_SUPPORT) += spl_sata.o
  endif
---- ./fs/Makefile.orig	2014-08-21 09:58:00.612139021 +0200
+diff --git a/common/spl/spl_ext.c b/common/spl/spl_ext.c
-+++ ./fs/Makefile	2014-08-21 09:58:15.603138490 +0200
+new file mode 100644
-@@ -8,6 +8,7 @@
+index 0000000..7342268
- 
+--- /dev/null
- ifdef CONFIG_SPL_BUILD
++++ b/common/spl/spl_ext.c
- obj-$(CONFIG_SPL_FAT_SUPPORT) += fat/
+@@ -0,0 +1,138 @@
-+obj-$(CONFIG_SPL_EXT_SUPPORT) += ext4/
- else
- obj-y				+= fs.o
- 
---- /dev/null	2014-08-21 08:33:45.854318006 +0200
-+++ common/spl/spl_ext.c	2014-08-21 10:26:03.376079435 +0200
-@@ -0,0 +1,139 @@
 +/*
 + * SPDX-License-Identifier:	GPL-2.0+
 + */
@@ -77,7 +577,7 @@
 +	puts("spl: ext4fs_open failed\n");
 +		goto end;
 +	}
-+	err = ext4fs_read((u8 *)header, sizeof(struct image_header));
++	err = ext4fs_read((char *)header, sizeof(struct image_header));
 +	if (err <= 0) {
 +		puts("spl: ext4fs_read failed\n");
 +		goto end;
@@ -85,7 +585,7 @@
 +
 +	spl_parse_image_header(header);
 +
-+	err = ext4fs_read((u8 *)spl_image.load_addr, filelen);
++	err = ext4fs_read((char *)spl_image.load_addr, filelen);
 +
 +end:
 +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
@@ -152,43 +652,208 @@
 +defaults:
 +#endif
 +
-+	filelen = err = ext4fs_open(CONFIG_SPL_FAT_LOAD_ARGS_NAME);
++	filelen = err = ext4fs_open(CONFIG_SPL_FS_LOAD_ARGS_NAME);
 +		if (err < 0) {
 +			puts("spl: ext4fs_open failed\n");
-+			//goto defaults;
 +		}
 +	err = ext4fs_read( (void *)CONFIG_SYS_SPL_ARGS_ADDR, filelen);
 +	if (err <= 0) {
 +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
 +		printf("%s: error reading image %s, err - %d\n",
-+		       __func__, CONFIG_SPL_FAT_LOAD_ARGS_NAME, err);
++		       __func__, CONFIG_SPL_FS_LOAD_ARGS_NAME, err);
 +#endif
 +		return -1;
 +	}
 +
 +	return spl_load_image_ext(block_dev, partition,
-+			CONFIG_SPL_FAT_LOAD_KERNEL_NAME);
++			CONFIG_SPL_FS_LOAD_KERNEL_NAME);
 +}
 +#endif
 +#endif
 +
---- common/spl/spl_mmc.c.orig	2014-08-06 15:12:58.000000000 +0200
+diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
-+++ common/spl/spl_mmc.c	2014-08-21 10:38:25.144053170 +0200
+index a631e0a..ee71f79 100644
-@@ -100,6 +102,17 @@ void spl_mmc_load_image(void)
+--- a/common/spl/spl_mmc.c
++++ b/common/spl/spl_mmc.c
+@@ -100,9 +100,10 @@ void spl_mmc_load_image(void)
  #endif
  		err = mmc_load_image_raw(mmc,
  			CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
+-#ifdef CONFIG_SPL_FAT_SUPPORT
++#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+ 	} else if (boot_mode == MMCSD_MODE_FS) {
+-		debug("boot mode - FAT\n");
++		debug("boot mode - FS\n");
++#ifdef CONFIG_SPL_FAT_SUPPORT
+ #ifdef CONFIG_SPL_OS_BOOT
+ 		if (spl_start_uboot() || spl_load_image_fat_os(&mmc->block_dev,
+ 								CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION))
+@@ -110,7 +111,20 @@ void spl_mmc_load_image(void)
+ 		err = spl_load_image_fat(&mmc->block_dev,
+ 					CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION,
+ 					CONFIG_SPL_FS_LOAD_PAYLOAD_NAME);
++		if(err)
++#endif /* CONFIG_SPL_FAT_SUPPORT */
++		{
 +#ifdef CONFIG_SPL_EXT_SUPPORT
-+	} else if (boot_mode == MMCSD_MODE_FAT) {
-+		debug("boot mode - EXT\n");
 +#ifdef CONFIG_SPL_OS_BOOT
 +		if (spl_start_uboot() || spl_load_image_ext_os(&mmc->block_dev,
-+								CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION))
++								CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION))
-+#endif
+ #endif
 +		err = spl_load_image_ext(&mmc->block_dev,
-+					CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION,
++					CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION,
-+					CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
++					CONFIG_SPL_FS_LOAD_PAYLOAD_NAME);
-+#endif
++#endif /* CONFIG_SPL_EXT_SUPPORT */
- #ifdef CONFIG_SPL_FAT_SUPPORT
++		}
- 	} else if (boot_mode == MMCSD_MODE_FAT) {
++#endif /* defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT) */
- 		debug("boot mode - FAT\n");
+ #ifdef CONFIG_SUPPORT_EMMC_BOOT
+ 	} else if (boot_mode == MMCSD_MODE_EMMCBOOT) {
+ 		/*
+diff --git a/fs/Makefile b/fs/Makefile
+index 1822165..51d06fc 100644
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -8,6 +8,7 @@
+ 
+ ifdef CONFIG_SPL_BUILD
+ obj-$(CONFIG_SPL_FAT_SUPPORT) += fat/
++obj-$(CONFIG_SPL_EXT_SUPPORT) += ext4/
+ else
+ obj-y				+= fs.o
+ 
+diff --git a/include/spl.h b/include/spl.h
+index 58c81dc..f4688c0 100644
+--- a/include/spl.h
++++ b/include/spl.h
+@@ -72,6 +72,10 @@ void spl_sata_load_image(void);
+ int spl_load_image_fat(block_dev_desc_t *block_dev, int partition, const char *filename);
+ int spl_load_image_fat_os(block_dev_desc_t *block_dev, int partition);
+ 
++/* SPL EXT image functions */
++int spl_load_image_ext(block_dev_desc_t *block_dev, int partition, const char *filename);
++int spl_load_image_ext_os(block_dev_desc_t *block_dev, int partition);
++
+ #ifdef CONFIG_SPL_BOARD_INIT
+ void spl_board_init(void);
+ #endif
+-- 
+1.8.4.5
+
+From 0c10154334aa4dd7bd40a6896a93f9cdfb83d2d2 Mon Sep 17 00:00:00 2001
+From: Guillaume GARDET <guillaume.gardet@free.fr>
+Date: Fri, 19 Sep 2014 10:07:09 +0200
+Subject: [PATCH 3/5] doc: Update documentation according to the EXT SPL
+ support patch set
+
+---
+ README         | 17 ++++++++++-------
+ doc/README.SPL |  1 +
+ 2 files changed, 11 insertions(+), 7 deletions(-)
+
+diff --git a/README b/README
+index 46def00..43b460c 100644
+--- a/README
++++ b/README
+@@ -3541,7 +3541,7 @@ FIT uImage format:
+ 
+ 		CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
+ 		CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS,
+-		CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION
++		CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION
+ 		Address, size and partition on the MMC to load U-Boot from
+ 		when the MMC is being used in raw mode.
+ 
+@@ -3558,16 +3558,19 @@ FIT uImage format:
+ 		CONFIG_SPL_FAT_SUPPORT
+ 		Support for fs/fat/libfat.o in SPL binary
+ 
+-		CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME
+-		Filename to read to load U-Boot when reading from FAT
++		CONFIG_SPL_EXT_SUPPORT
++		Support for EXT filesystem in SPL binary
+ 
+-		CONFIG_SPL_FAT_LOAD_KERNEL_NAME
++		CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
++		Filename to read to load U-Boot when reading from filesystem
++
++		CONFIG_SPL_FS_LOAD_KERNEL_NAME
+ 		Filename to read to load kernel uImage when reading
+-		from FAT (for Falcon mode)
++		from filesystem (for Falcon mode)
+ 
+-		CONFIG_SPL_FAT_LOAD_ARGS_NAME
++		CONFIG_SPL_FS_LOAD_ARGS_NAME
+ 		Filename to read to load kernel argument parameters
+-		when reading from FAT (for Falcon mode)
++		when reading from filesystem (for Falcon mode)
+ 
+ 		CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
+ 		Set this for NAND SPL on PPC mpc83xx targets, so that
+diff --git a/doc/README.SPL b/doc/README.SPL
+index c283dcf..3ba313c 100644
+--- a/doc/README.SPL
++++ b/doc/README.SPL
+@@ -54,6 +54,7 @@ CONFIG_SPL_SERIAL_SUPPORT (drivers/serial/libserial.o)
+ CONFIG_SPL_SPI_FLASH_SUPPORT (drivers/mtd/spi/libspi_flash.o)
+ CONFIG_SPL_SPI_SUPPORT (drivers/spi/libspi.o)
+ CONFIG_SPL_FAT_SUPPORT (fs/fat/libfat.o)
++CONFIG_SPL_EXT_SUPPORT
+ CONFIG_SPL_LIBGENERIC_SUPPORT (lib/libgeneric.o)
+ CONFIG_SPL_POWER_SUPPORT (drivers/power/libpower.o)
+ CONFIG_SPL_NAND_SUPPORT (drivers/mtd/nand/libnand.o)
+-- 
+1.8.4.5
+
+From 238c02388b820ad685873038da23d5653aa00c64 Mon Sep 17 00:00:00 2001
+From: Guillaume GARDET <guillaume.gardet@free.fr>
+Date: Fri, 19 Sep 2014 10:08:09 +0200
+Subject: [PATCH 4/5] spl: do not hang in spl_register_fat_device but return
+ error value. It allows to use both CONFIG_SPL_FAT_SUPPORT and
+ CONFIG_SPL_EXT_SUPPORT.
+
+---
+ common/spl/spl_fat.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/common/spl/spl_fat.c b/common/spl/spl_fat.c
+index 91481fc..350f7d9 100644
+--- a/common/spl/spl_fat.c
++++ b/common/spl/spl_fat.c
+@@ -30,7 +30,7 @@ static int spl_register_fat_device(block_dev_desc_t *block_dev, int partition)
+ #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
+ 		printf("%s: fat register err - %d\n", __func__, err);
+ #endif
+-		hang();
++		return err;
+ 	}
+ 
+ 	fat_registered = 1;
+-- 
+1.8.4.5
+
+From b801768f6840702a397c4176cdcb64e2045cd6f1 Mon Sep 17 00:00:00 2001
+From: Guillaume GARDET <guillaume.gardet@free.fr>
+Date: Fri, 19 Sep 2014 10:09:28 +0200
+Subject: [PATCH 5/5] TI:OMAP4: enable EXT support in SPL for OMAP4 boards
+
+---
+ include/configs/ti_omap4_common.h | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
+index b0f199e..1c93aab 100644
+--- a/include/configs/ti_omap4_common.h
++++ b/include/configs/ti_omap4_common.h
+@@ -167,6 +167,9 @@
+ #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
+ 					 (128 << 20))
+ 
++/* SPL: Allow to use an EXT partition */
++#define CONFIG_SPL_EXT_SUPPORT
++
+ #ifdef CONFIG_NAND
+ #define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
+ #endif
+-- 
+1.8.4.5
+

am335x_evm-bootscr.patch

@@ -1,47 +0,0 @@
-Index: u-boot-2014.10-rc1/include/configs/am335x_evm.h
-===================================================================
---- u-boot-2014.10-rc1.orig/include/configs/am335x_evm.h
-+++ u-boot-2014.10-rc1/include/configs/am335x_evm.h
-@@ -115,6 +115,9 @@
- 		"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
- 		"ip=dhcp\0" \
- 	"bootenv=uEnv.txt\0" \
-+	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-+	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-+		"source ${loadaddr}\0" \
- 	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
- 	"importbootenv=echo Importing environment from mmc ...; " \
- 		"env import -t -r $loadaddr $filesize\0" \
-@@ -142,17 +145,21 @@
- 	"mmcboot=mmc dev ${mmcdev}; " \
- 		"if mmc rescan; then " \
- 			"echo SD/MMC found on device ${mmcdev};" \
--			"if run loadbootenv; then " \
--				"echo Loaded environment from ${bootenv};" \
--				"run importbootenv;" \
--			"fi;" \
--			"if test -n $uenvcmd; then " \
--				"echo Running uenvcmd ...;" \
--				"run uenvcmd;" \
--			"fi;" \
--			"if run loadimage; then " \
--				"run mmcloados;" \
--			"fi;" \
-+			"if run loadbootscript; then " \
-+				"run bootscript;" \
-+			"else " \	
-+				"if run loadbootenv; then " \
-+					"echo Loaded environment from ${bootenv};" \
-+					"run importbootenv;" \
-+				"fi;" \
-+				"if test -n $uenvcmd; then " \
-+					"echo Running uenvcmd ...;" \
-+					"run uenvcmd;" \
-+				"fi;" \
-+				"if run loadimage; then " \
-+					"run mmcloados;" \
-+				"fi;" \
-+			"fi ;" \
- 		"fi;\0" \
- 	"spiboot=echo Booting from spi ...; " \
- 		"run spiargs; " \

beagle-bootscr.patch

@@ -1,40 +0,0 @@
-Index: include/configs/omap3_beagle.h
-===================================================================
---- include/configs/omap3_beagle.h.orig
-+++ include/configs/omap3_beagle.h
-@@ -193,7 +193,7 @@
- 			"fi; " \
- 		"fi; \0" \
- 	"bootenv=uEnv.txt\0" \
--	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-+	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
- 	"importbootenv=echo Importing environment from mmc ...; " \
- 		"env import -t -r $loadaddr $filesize\0" \
- 	"ramargs=setenv bootargs console=${console} " \
-@@ -207,6 +207,9 @@
- 		"rootfstype=${ramrootfstype}\0" \
- 	"loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
- 	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-+	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-+		"source ${loadaddr}\0" \
- 	"loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
- 	"mmcboot=echo Booting from mmc ...; " \
- 		"run mmcargs; " \
-@@ -243,9 +246,13 @@
- 			"echo Running uenvcmd ...;" \
- 			"run uenvcmd;" \
- 		"fi;" \
--		"if run loadimage; then " \
--			"run mmcboot;" \
--		"fi;" \
-+		"if run loadbootscript; then " \
-+			"run bootscript; " \
-+		"else " \
-+			"if run loadimage; then " \
-+				"run mmcboot;" \
-+			"fi;" \
-+		"fi; " \
- 	"fi;" \
- 	"run nandboot;" \
- 	"setenv bootfile zImage;" \

drop-marvell.patch

@@ -1,8 +1,8 @@
-Index: u-boot-2014.10-rc1/arch/arm/Kconfig
+Index: u-boot-2014.10-rc3/arch/arm/Kconfig
 ===================================================================
---- u-boot-2014.10-rc1.orig/arch/arm/Kconfig
+--- u-boot-2014.10-rc3.orig/arch/arm/Kconfig    2014-10-08 10:39:59.003117003 +0200
-+++ u-boot-2014.10-rc1/arch/arm/Kconfig
++++ u-boot-2014.10-rc3/arch/arm/Kconfig 2014-10-08 10:40:14.788116444 +0200
-@@ -545,9 +545,6 @@ source "board/BuR/tseries/Kconfig"
+@@ -559,9 +559,6 @@ source "board/BuR/tseries/Kconfig"
  source "board/BuS/eb_cpux9k2/Kconfig"
  source "board/BuS/vl_ma2sc/Kconfig"
  source "board/CarMediaLab/flea3/Kconfig"
@@ -12,12 +12,12 @@ Index: u-boot-2014.10-rc1/arch/arm/Kconfig
  source "board/afeb9260/Kconfig"
  source "board/altera/socfpga/Kconfig"
  source "board/armadeus/apf27/Kconfig"
-Index: u-boot-2014.10-rc1/arch/arm/cpu/arm926ejs/kirkwood/Kconfig
+Index: u-boot-2014.10-rc3/arch/arm/cpu/arm926ejs/kirkwood/Kconfig
 ===================================================================
---- u-boot-2014.10-rc1.orig/arch/arm/cpu/arm926ejs/kirkwood/Kconfig
+--- u-boot-2014.10-rc3.orig/arch/arm/cpu/arm926ejs/kirkwood/Kconfig	2014-10-08 10:39:58.976117004 +0200
-+++ u-boot-2014.10-rc1/arch/arm/cpu/arm926ejs/kirkwood/Kconfig
++++ u-boot-2014.10-rc3/arch/arm/cpu/arm926ejs/kirkwood/Kconfig	2014-10-08 10:40:14.789116444 +0200
-@@ -67,12 +67,6 @@ config SYS_SOC
+@@ -65,12 +65,6 @@ config SYS_CPU
- 	string
+ config SYS_SOC
  	default "kirkwood"
  
 -source "board/Marvell/openrd/Kconfig"
@@ -29,11 +29,11 @@ Index: u-boot-2014.10-rc1/arch/arm/cpu/arm926ejs/kirkwood/Kconfig
  source "board/buffalo/lsxl/Kconfig"
  source "board/cloudengines/pogo_e02/Kconfig"
  source "board/d-link/dns325/Kconfig"
-Index: u-boot-2014.10-rc1/arch/powerpc/cpu/74xx_7xx/Kconfig
+Index: u-boot-2014.10-rc3/arch/powerpc/cpu/74xx_7xx/Kconfig
 ===================================================================
---- u-boot-2014.10-rc1.orig/arch/powerpc/cpu/74xx_7xx/Kconfig
+--- u-boot-2014.10-rc3.orig/arch/powerpc/cpu/74xx_7xx/Kconfig   2014-10-08 10:39:58.947117005 +0200
-+++ u-boot-2014.10-rc1/arch/powerpc/cpu/74xx_7xx/Kconfig
++++ u-boot-2014.10-rc3/arch/powerpc/cpu/74xx_7xx/Kconfig        2014-10-08 10:40:14.789116444 +0200
-@@ -37,8 +37,6 @@ config TARGET_P3MX
+@@ -36,8 +36,6 @@ config TARGET_P3MX
  
  endchoice
  

fix_beagle_spl_build.patch

@@ -0,0 +1,17 @@
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index f25a940..a28453c 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -311,6 +311,12 @@
+ #define CONFIG_SYS_NAND_ECCBYTES	3
+ #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
+ #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
++
++/* SPL: EXT SUPPORT needs to disable CONFIG_SPL_FAT_SUPPORT otherwise spl is too big for .sram */
++#ifdef CONFIG_SPL_EXT_SUPPORT
++#undef CONFIG_SPL_FAT_SUPPORT
++#endif
++
+ /* NAND: SPL falcon mode configs */
+ #ifdef CONFIG_SPL_OS_BOOT
+ #define CONFIG_CMD_SPL_NAND_OFS		0x240000

fix_omap_boot_mode.patch

@@ -6,7 +6,7 @@ Index: arch/arm/cpu/armv7/omap3/board.c
  /* auto boot mode detection is not possible for OMAP3 - hard code */
  u32 spl_boot_mode(void)
  {
-+	return MMCSD_MODE_FAT;
++	return MMCSD_MODE_FS;
 +
  	switch (spl_boot_device()) {
  	case BOOT_DEVICE_MMC2:
@@ -22,7 +22,7 @@ Index:  common/spl/spl_mmc.c.orig
  
 -	boot_mode = spl_boot_mode();
 +//	boot_mode = spl_boot_mode();
-+	boot_mode = MMCSD_MODE_FAT; /* Fix OMAP4 boot */
++	boot_mode = MMCSD_MODE_FS; /* Fix OMAP4 boot */
 +
  	if (boot_mode == MMCSD_MODE_RAW) {
  		debug("boot mode - RAW\n");

fix_sabrelite_boot.scr.patch

@@ -13,11 +13,11 @@ Index: include/configs/nitrogen6x.h
  	"mmcargs=setenv bootargs console=${console},${baudrate} " \
  		"root=${mmcroot}\0" \
 -	"loadbootscript=" \
--		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+-		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 +	"loadbootscript=load mmc ${mmcdev} ${loadaddr} ${script};\0" \
  	"bootscript=echo Running bootscript from mmc ...; " \
  		"source\0" \
- 	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ 	"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 @@ -238,16 +237,14 @@
  		"fi;\0"
  

panda-bootscr.patch

@@ -1,17 +0,0 @@
-Index: include/configs/ti_omap4_common.h
-===================================================================
---- include/configs/ti_omap4_common.h.orig
-+++ include/configs/ti_omap4_common.h
-@@ -102,10 +102,10 @@
- 		"vram=${vram} " \
- 		"root=${mmcroot} " \
- 		"rootfstype=${mmcrootfstype}\0" \
--	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-+	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
- 	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
- 		"source ${loadaddr}\0" \
--	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
-+	"loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
- 	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
- 		"env import -t ${loadaddr} ${filesize}\0" \
- 	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \

u-boot-2014.10-rc2.tar.bz2

@@ -1,3 +0,0 @@
-version https://git-lfs.github.com/spec/v1
-oid sha256:82402ee1308c8c6bc141ec2f05d4bdce0a50451cbab9a7ef553594ded52b0539
-size 10133718

u-boot-2014.10-rc3.tar.bz2

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:d75e0f7d4852c6ddcff4df5d6476bb3f2d69411b8bb625b86272ebfaa6eacace
+size 10231262

u-boot-am335xevm.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot-am335xevm.spec

@@ -25,27 +25,25 @@
 %define cuboxi_spl 0
 
 Name:           u-boot-am335xevm
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the am335xevm arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20

u-boot-arndale.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot-arndale.spec

@@ -25,27 +25,25 @@
 %define cuboxi_spl 0
 
 Name:           u-boot-arndale
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the arndale arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20

u-boot-colibrit20iris.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot-colibrit20iris.spec

@@ -25,27 +25,25 @@
 %define cuboxi_spl 0
 
 Name:           u-boot-colibrit20iris
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the colibrit20iris arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20

u-boot-cubieboard.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot-cubieboard.spec

@@ -25,27 +25,25 @@
 %define cuboxi_spl 0
 
 Name:           u-boot-cubieboard
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the cubieboard arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20

u-boot-cubieboard2.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot-cubieboard2.spec

@@ -25,27 +25,25 @@
 %define cuboxi_spl 0
 
 Name:           u-boot-cubieboard2
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the cubieboard2 arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20

u-boot-cubietruck.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot-cubietruck.spec

@@ -25,27 +25,25 @@
 %define cuboxi_spl 0
 
 Name:           u-boot-cubietruck
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the cubietruck arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20

u-boot-highbank.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot-highbank.spec

@@ -25,27 +25,25 @@
 %define cuboxi_spl 0
 
 Name:           u-boot-highbank
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the highbank arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20

u-boot-melea1000.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot-melea1000.spec

@@ -25,27 +25,25 @@
 %define cuboxi_spl 0
 
 Name:           u-boot-melea1000
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the melea1000 arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20

u-boot-mx53loco.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot-mx53loco.spec

@@ -25,27 +25,25 @@
 %define cuboxi_spl 0
 
 Name:           u-boot-mx53loco
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the mx53loco arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20

u-boot-mx6qsabrelite.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot-mx6qsabrelite.spec

@@ -25,27 +25,25 @@
 %define cuboxi_spl 0
 
 Name:           u-boot-mx6qsabrelite
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the mx6qsabrelite arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20

u-boot-omap3beagle.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot-omap3beagle.spec

@@ -25,27 +25,25 @@
 %define cuboxi_spl 0
 
 Name:           u-boot-omap3beagle
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the omap3beagle arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20

u-boot-omap4panda.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot-omap4panda.spec

@@ -25,27 +25,25 @@
 %define cuboxi_spl 0
 
 Name:           u-boot-omap4panda
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the omap4panda arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20

u-boot-paz00.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot-paz00.spec

@@ -25,27 +25,25 @@
 %define cuboxi_spl 0
 
 Name:           u-boot-paz00
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the paz00 arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20

u-boot-rpib.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot-rpib.spec

@@ -25,27 +25,25 @@
 %define cuboxi_spl 0
 
 Name:           u-boot-rpib
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the rpib arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20

u-boot-snow.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot-snow.spec

@@ -25,27 +25,25 @@
 %define cuboxi_spl 0
 
 Name:           u-boot-snow
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the snow arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20

u-boot-vexpressaemv8a.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot-vexpressaemv8a.spec

@@ -25,27 +25,25 @@
 %define cuboxi_spl 0
 
 Name:           u-boot-vexpressaemv8a
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the vexpressaemv8a arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20

u-boot.changes

@@ -1,3 +1,18 @@
+-------------------------------------------------------------------
+Wed Oct  8 07:52:48 UTC 2014 - guillaume@opensuse.org
+
+- Update to version 2014.10-rc3 
+- Drop upstreamed patches:
+  * beagle-bootscr.patch
+  * panda-bootscr.patch
+  * am335x_evm-bootscr.patch
+- Refresh patches:
+  * fix_sabrelite_boot.scr.patch
+  * drop-marvell.patch
+  * add_spl_extfs_support.patch
+- Add a new patch to fix omap3beagle spl build:
+  * fix_beagle_spl_build.patch
+
 -------------------------------------------------------------------
 Mon Sep  8 13:06:52 UTC 2014 - guillaume@opensuse.org
 

u-boot.spec

@@ -19,14 +19,14 @@
 
 
 Name:           u-boot
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        Tools for the u-boot Firmware
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:         u-boot-%{version}.tar.bz2
-Source:         u-boot-2014.10-rc2.tar.bz2
+Source:         u-boot-2014.10-rc3.tar.bz2
 BuildRequires:  libopenssl-devel
 BuildRequires:  python
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
@@ -48,7 +48,7 @@ mkimage- a tool that creates kernel bootable images for u-boot.
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 
 %build
 # needed for include/config/auto.conf

u-boot.spec.in

@@ -25,27 +25,25 @@
 %define cuboxi_spl CUBOXI_SPL
 
 Name:           u-boot-BOARDNAME
-Version:        2014.10~rc2
+Version:        2014.10~rc3
 Release:        0
 Summary:        The u-boot firmware for the BOARDNAME arm platform
 License:        GPL-2.0
 Group:          System/Boot
 Url:            http://www.denx.de/wiki/U-Boot
 #Source:        ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2
-Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc2.tar.bz2
+Source:         ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10-rc3.tar.bz2
 Source2:        arndale-bl1.img
 Source300:      u-boot-rpmlintrc
-Patch0:         enable_spl_ext_support_for_ti_armv7.patch
+Patch0:         add_spl_extfs_support.patch
-Patch1:         add_spl_extfs_support.patch
+Patch1:         enable_spl_ext_support_for_ti_armv7.patch
-Patch2:         fix_omap_boot_mode.patch
+Patch2:         fix_beagle_spl_build.patch
-Patch3:         ti_common_initrd_support.patch
+Patch3:         fix_omap_boot_mode.patch
-Patch4:         beagle-bootscr.patch
+Patch4:         ti_common_initrd_support.patch
-Patch5:         panda-bootscr.patch
+Patch5:         fix_sabrelite_boot.scr.patch
 Patch6:         mx53loco-bootscr.patch
 Patch7:         origen-ext2.patch
 Patch8:         arndale.patch
-Patch9:         am335x_evm-bootscr.patch
-Patch10:        fix_sabrelite_boot.scr.patch
 Patch20:        fix_exynos5_text_base.patch
 Patch21:        fix_snow_config.patch
 Patch22:        exynos5-dt.h.patch
@@ -77,21 +75,19 @@ This package contains documentation for u-boot firmware
 
 %prep
 #%setup -q -n u-boot-%{version}
-%setup -q -n u-boot-2014.10-rc2
+%setup -q -n u-boot-2014.10-rc3
 # is non-free licensed, and we don't need it (bnc#773824)
 rm -rf board/Marvell
 # Any custom patches to be applied on top of mainline u-boot
-%patch0
+%patch0 -p1
 %patch1
-%patch2
+%patch2 -p1
 %patch3
 %patch4
 %patch5
 %patch6
 %patch7
 %patch8
-%patch9 -p1
-%patch10
 %if "%{name}" == "u-boot-snow"
 # Still WIP, so only apply Chromebook ARM (snow) patches for u-boot-snow to avoid to break other boards (Arndale board)
 %patch20