Accepting request 257581 from home:StefanBruens:branches:hardware

OBS-URL: https://build.opensuse.org/request/show/257581
OBS-URL: https://build.opensuse.org/package/show/hardware/wpa_supplicant?expand=0&rev=48

wpa_supplicant-2.2.tar.gz

@@ -1,3 +0,0 @@
-version https://git-lfs.github.com/spec/v1
-oid sha256:e0d8b8fd68a659636eaba246bb2caacbf53d22d53b2b6b90eb4b4fef0993c8ed
-size 2382570

wpa_supplicant-2.3.tar.gz

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:eaaa5bf3055270e521b2dff64f2d203ec8040f71958b8588269a82c00c9d7b6a
+size 2398722

wpa_supplicant.changes

@@ -1,3 +1,71 @@
+-------------------------------------------------------------------
+Sat Oct 18 21:08:01 UTC 2014 - stefan.bruens@rwth-aachen.de
+
+- Update to 2.3
+  * fixed number of minor issues identified in static analyzer warnings
+  * fixed wfd_dev_info to be more careful and not read beyond the buffer
+    when parsing invalid information for P2P-DEVICE-FOUND
+  * extended P2P and GAS query operations to support drivers that have
+    maximum remain-on-channel time below 1000 ms (500 ms is the current
+    minimum supported value)
+  * added p2p_search_delay parameter to make the default p2p_find delay
+    configurable
+  * improved P2P operating channel selection for various multi-channel
+    concurrency cases
+  * fixed some TDLS failure cases to clean up driver state
+  * fixed dynamic interface addition cases with nl80211 to avoid adding
+    ifindex values to incorrect interface to skip foreign interface events
+    properly
+  * added TDLS workaround for some APs that may add extra data to the
+    end of a short frame
+  * fixed EAP-AKA' message parser with multiple AT_KDF attributes
+  * added configuration option (p2p_passphrase_len) to allow longer
+    passphrases to be generated for P2P groups
+  * fixed IBSS channel configuration in some corner cases
+  * improved HT/VHT/QoS parameter setup for TDLS
+  * modified D-Bus interface for P2P peers/groups
+  * started to use constant time comparison for various password and hash
+    values to reduce possibility of any externally measurable timing
+    differences
+  * extended explicit clearing of freed memory and expired keys to avoid
+    keeping private data in memory longer than necessary
+  * added optional scan_id parameter to the SCAN command to allow manual
+    scan requests for active scans for specific configured SSIDs
+  * fixed CTRL-EVENT-REGDOM-CHANGE event init parameter value
+  * added option to set Hotspot 2.0 Rel 2 update_identifier in network
+    configuration to support external configuration
+  * modified Android PNO functionality to send Probe Request frames only
+    for hidden SSIDs (based on scan_ssid=1)
+  * added generic mechanism for adding vendor elements into frames at
+    runtime (VENDOR_ELEM_ADD, VENDOR_ELEM_GET, VENDOR_ELEM_REMOVE)
+  * added fields to show unrecognized vendor elements in P2P_PEER
+  * removed EAP-TTLS/MSCHAPv2 interoperability workaround so that
+    MS-CHAP2-Success is required to be present regardless of
+    eap_workaround configuration
+  * modified EAP fast session resumption to allow results to be used only
+    with the same network block that generated them
+  * extended freq_list configuration to apply for sched_scan as well as
+    normal scan
+  * modified WPS to merge mixed-WPA/WPA2 credentials from a single session
+  * fixed nl80211/RTM_DELLINK processing when a P2P GO interface is
+    removed from a bridge
+  * fixed number of small P2P issues to make negotiations more robust in
+    corner cases
+  * added experimental support for using temporary, random local MAC
+    address (mac_addr and preassoc_mac_addr parameters); this is disabled
+    by default (i.e., previous behavior of using permanent address is
+    maintained if configuration is not changed)
+  * added D-Bus interface for setting/clearing WFD IEs
+  * fixed TDLS AID configuration for VHT
+  * modified -m<conf> configuration file to be used only for the P2P
+    non-netdev management device and do not load this for the default
+    station interface or load the station interface configuration for
+    the P2P management interface
+  * fixed external MAC address changes while wpa_supplicant is running
+  * started to enable HT (if supported by the driver) for IBSS
+  * fixed wpa_cli action script execution to use more robust mechanism
+    (CVE-2014-3686)
+
 -------------------------------------------------------------------
 Thu Sep 18 12:32:57 UTC 2014 - schwab@suse.de
 

wpa_supplicant.spec

@@ -29,7 +29,7 @@ BuildRequires:  systemd-rpm-macros
 %endif
 BuildRequires:  libnl3-devel
 Url:            http://hostap.epitest.fi/wpa_supplicant/
-Version:        2.2
+Version:        2.3
 Release:        0
 Summary:        WPA supplicant implementation
 License:        BSD-3-Clause and GPL-2.0+