rpm/xz
SHA256
1
0
Fork 0
forked from pool/xz
Code Pull Requests Activity
104f8dece2
xz/xz.changes
Dirk Mueller 104f8dece2 Accepting request 994818 from home:dirkmueller:Factory 
- update to 5.2.6 (CVE-2022-1271, bsc#1198062):
  * xz:
    - The --keep option now accepts symlinks, hardlinks, and
      setuid, setgid, and sticky files.
    - When copying metadata from the source file to the destination
      file, don't try to set the group (GID) if it is already set
      correctly. This avoids a failure on OpenBSD (and possibly on
      a few other OSes) where files may get created so that their
      group doesn't belong to the user, and fchown(2) can fail even
      if it needs to do nothing.
    - Cap --memlimit-compress to 2000 MiB instead of 4020 MiB on
      MIPS32 because on MIPS32 userspace processes are limited
      to 2 GiB of address space.
  * liblzma:
    - Fixed a missing error-check in the threaded encoder. If a
      small memory allocation fails, a .xz file with an invalid
      Index field would be created. Decompressing such a file would
      produce the correct output but result in an error at the end.
      Thus this is a "mild" data corruption bug. Note that while
      a failed memory allocation can trigger the bug, it cannot
      cause invalid memory access.
    - The decoder for .lzma files now supports files that have
      uncompressed size stored in the header and still use the
      end of payload marker (end of stream marker) at the end
      of the LZMA stream. Such files are rare but, according to
      the documentation in LZMA SDK, they are valid.
      doc/lzma-file-format.txt was updated too.
    - Improved 32-bit x86 assembly files:
        * Support Intel Control-flow Enforcement Technology (CET)
        * Use non-executable stack on FreeBSD.

OBS-URL: https://build.opensuse.org/request/show/994818
OBS-URL: https://build.opensuse.org/package/show/Base:System/xz?expand=0&rev=111
2022-08-16 06:45:42 +00:00

675 lines
27 KiB
Plaintext
Raw Blame History

-------------------------------------------------------------------
Fri Aug 12 20:50:23 UTC 2022 - Dirk Müller <dmueller@suse.com>
- update to 5.2.6 (CVE-2022-1271, bsc#1198062):
* xz:
- The --keep option now accepts symlinks, hardlinks, and
setuid, setgid, and sticky files.
- When copying metadata from the source file to the destination
file, don't try to set the group (GID) if it is already set
correctly. This avoids a failure on OpenBSD (and possibly on
a few other OSes) where files may get created so that their
group doesn't belong to the user, and fchown(2) can fail even
if it needs to do nothing.
- Cap --memlimit-compress to 2000 MiB instead of 4020 MiB on
MIPS32 because on MIPS32 userspace processes are limited
to 2 GiB of address space.
* liblzma:
- Fixed a missing error-check in the threaded encoder. If a
small memory allocation fails, a .xz file with an invalid
Index field would be created. Decompressing such a file would
produce the correct output but result in an error at the end.
Thus this is a "mild" data corruption bug. Note that while
a failed memory allocation can trigger the bug, it cannot
cause invalid memory access.
- The decoder for .lzma files now supports files that have
uncompressed size stored in the header and still use the
end of payload marker (end of stream marker) at the end
of the LZMA stream. Such files are rare but, according to
the documentation in LZMA SDK, they are valid.
doc/lzma-file-format.txt was updated too.
- Improved 32-bit x86 assembly files:
* Support Intel Control-flow Enforcement Technology (CET)
* Use non-executable stack on FreeBSD.
* xzgrep:
- Fixed arbitrary command injection via a malicious filename
(CVE-2022-1271, ZDI-CAN-16587). A standalone patch for
this was released to the public on 2022-04-07. A slight
robustness improvement has been made since then and, if
using GNU or *BSD grep, a new faster method is now used
that doesn't use the old sed-based construct at all. This
also fixes bad output with GNU grep >= 3.5 (2020-09-27)
when xzgrepping binary files.
- Fixed detection of corrupt .bz2 files.
- Improved error handling to fix exit status in some situations
and to fix handling of signals: in some situations a signal
didn't make xzgrep exit when it clearly should have. It's
possible that the signal handling still isn't quite perfect
but hopefully it's good enough.
- Documented exit statuses on the man page.
- xzegrep and xzfgrep now use "grep -E" and "grep -F" instead
of the deprecated egrep and fgrep commands.
- Fixed parsing of the options -E, -F, -G, -P, and -X. The
problem occurred when multiple options were specied in
a single argument, for example,
echo foo | xzgrep -Fe foo
treated foo as a filename because -Fe wasn't correctly
split into -F -e.
- Added zstd support.
* xzdiff/xzcmp:
- Fixed wrong exit status. Exit status could be 2 when the
correct value is 1.
- Documented on the man page that exit status of 2 is used
for decompression errors.
- Added zstd support.
* xzless:
- Fix less(1) version detection. It failed if the version number
from "less -V" contained a dot.
-------------------------------------------------------------------
Tue Apr 12 15:35:19 UTC 2022 - Marcus Meissner <meissner@suse.com>
- use https urls.
-------------------------------------------------------------------
Mon Jun 7 11:45:15 UTC 2021 - Jan Engelhardt <jengelh@inai.de>
- Upgrade old rpm constructs.
-------------------------------------------------------------------
Wed Mar 18 11:11:48 UTC 2020 - Paolo Stivanin <info@paolostivanin.com>
- Update to 5.2.5:
* liblzma:
- Fixed several C99/C11 conformance bugs. Now the code is clean
under gcc/clang -fsanitize=undefined. Some of these changes
might have a negative effect on performance with old GCC
versions or compilers other than GCC and Clang. The configure
option --enable-unsafe-type-punning can be used to (mostly)
restore the old behavior but it shouldn't normally be used.
- Improved API documentation of lzma_properties_decode().
- Added a very minor encoder speed optimization.
* xz:
- Fixed a crash in "xz -dcfv not_an_xz_file". All four options
were required to trigger it. The crash occurred in the
progress indicator code when xz was in passthru mode where
xz works like "cat".
- Fixed an integer overflow with 32-bit off_t. It could happen
when decompressing a file that has a long run of zero bytes
which xz would try to write as a sparse file. Since the build
system enables large file support by default, off_t is
normally 64-bit even on 32-bit systems.
- Fixes for --flush-timeout:
* Fix semi-busy-waiting.
* Avoid unneeded flushes when no new input has arrived
since the previous flush was completed.
- Added a special case for 32-bit xz: If --memlimit-compress is
used to specify a limit that exceeds 4020 MiB, the limit will
be set to 4020 MiB. The values "0" and "max" aren't affected
by this and neither is decompression. This hack can be
helpful when a 32-bit xz has access to 4 GiB address space
but the specified memlimit exceeds 4 GiB. This can happen
e.g. with some scripts.
- Capsicum sandbox is now enabled by default where available
(FreeBSD >= 10). The sandbox debug messages (xz -vv) were
removed since they seemed to be more annoying than useful.
-------------------------------------------------------------------
Thu Sep 19 07:49:19 UTC 2019 - Ludwig Nussel <lnussel@suse.de>
- Do not recommend lang package. The lang package already has a supplements.
-------------------------------------------------------------------
Fri Aug 2 08:22:51 UTC 2019 - Martin Liška <mliska@suse.cz>
- Use FAT LTO objects in order to provide proper static library.
-------------------------------------------------------------------
Tue May 21 13:05:05 UTC 2019 - Kristýna Streitová <kstreitova@suse.com>
- add SUSE-Public-Domain licence as some parts of xz utils (liblzma,
xz, xzdec, lzmadec, documentation, translated messages, tests,
debug, extra directory) are in public domain licence [bsc#1135709]
-------------------------------------------------------------------
Fri Jun 15 11:11:38 UTC 2018 - astieger@suse.com
- xz 5.2.4:
* liblzma:
- Allow 0 as memory usage limit instead of returning
LZMA_PROG_ERROR. Now 0 is treated as if 1 byte was specified,
which effectively is the same as 0.
- Use "noexcept" keyword instead of "throw()" in the public
headers when a C++11 (or newer standard) compiler is used.
- Added a portability fix for recent Intel C Compilers.
* xz:
- Fix "xz --list --robot missing_or_bad_file.xz" which would
try to print an unitialized string and thus produce garbage
output. Since the exit status is non-zero, most uses of such
a command won't try to interpret the garbage output.
- "xz --list foo.xz" could print "Internal error (bug)" in a
corner case where a specific memory usage limit had been set.
-------------------------------------------------------------------
Mon Mar 19 15:41:58 CET 2018 - kukuk@suse.de
- Use %license instead of %doc [bsc#1082318]
-------------------------------------------------------------------
Mon Jul 10 10:50:01 UTC 2017 - jengelh@inai.de
- % needs to be encoded in description; adjust weird indent there
as well. Expand LZMA in summaries.
-------------------------------------------------------------------
Fri Jun 30 18:25:33 UTC 2017 - olaf@aepfle.de
- Really use the selfdefined CFLAGS during build to fix build
-------------------------------------------------------------------
Sun Jun 25 11:37:03 UTC 2017 - astieger@suse.com
- fix CentOS/RHEL builds after clean-up
-------------------------------------------------------------------
Wed Jun 21 14:11:44 UTC 2017 - mpluskal@suse.com
- Simplify spec file conditions
- Clenup profiled building
- Use full lists of files
-------------------------------------------------------------------
Tue Feb 21 09:03:18 UTC 2017 - adrian@suse.de
- enable static package by default.
Needed for AppImageKit
-------------------------------------------------------------------
Sat Dec 31 22:17:33 UTC 2016 - astieger@suse.com
- xz 5.2.3:
* xz: always close a file before trying to delete it to avoid
problems on some operating system and file system combinations.
* C99/C11 conformance fixes to liblzma. The issues affected at
least some builds using link-time optimizations.
* Fixed bugs in the rarely-used function lzma_index_dup().
* Use of external SHA-256 code is now disabled by default.
It can still be enabled by passing --enable-external-sha256
* Changed CPU core count detection to use sched_getaffinity() on
GNU/Linux and GNU/kFreeBSD.
* Fixes to the build-system
-------------------------------------------------------------------
Sun Mar 13 09:40:51 UTC 2016 - mpluskal@suse.com
- Install xznew with correct permissions (boo#970842)
-------------------------------------------------------------------
Sun Feb 14 09:21:33 UTC 2016 - tchvatal@suse.com
- Do not split out lang_package conditional, used in sle10 out of support
-------------------------------------------------------------------
Tue Nov 10 14:34:14 UTC 2015 - hpj@urpla.net
- fix conversion: spell the missed parts correctly
-------------------------------------------------------------------
Sun Nov 8 13:09:53 UTC 2015 - hpj@urpla.net
- add xznew{,.1}, converted from bznew
-------------------------------------------------------------------
Tue Sep 29 21:28:21 UTC 2015 - astieger@suse.com
- xz 5.2.2:
* Omitted the use of pipe2() even if it is available to avoid
portability issues with some old Linux and glibc combinations
* Updated German translation
* Documented that threaded decompression is not implemented yet
-------------------------------------------------------------------
Fri Feb 27 18:48:48 UTC 2015 - astieger@suse.com
- xz 5.2.1:
* Fixed a compression-ratio regression in fast mode of LZMA1 and
LZMA2.
-------------------------------------------------------------------
Wed Jan 21 11:21:32 UTC 2015 - rguenther@suse.com
- Avoid running configure twice and using -fprofile-generate or
-fprofile-use for compiling configure tests when profiling.
-----------------------------------------------------------------
Thu Dec 25 20:23:28 UTC 2014 - andreas.stieger@gmx.de
- xz 5.2.0:
* liblzma:
- Added support for multi-threaded compression
- Made the uses of lzma_allocator const correct.
- Added lzma_block_uncomp_encode() to create uncompressed
.xz Blocks using LZMA2 uncompressed chunks.
- Added support for LZMA_IGNORE_CHECK.
- A few speed optimizations were made.
- Added support for symbol versioning. It is enabled by default
on GNU/Linux, other GNU-based systems, and FreeBSD.
* xz:
- Fixed a race condition in the signal handling
- Multi-threaded decompression can be enabled with the
--threads (-T) option.
- New command line options in xz: --single-stream,
--block-size=SIZE, --block-list=SIZES,
--flush-timeout=TIMEOUT, and --ignore-check.
- xz -lvv now shows the minimum xz version that is required to
decompress the file. Currently it is 5.0.0 for all supported
.xz files except files with empty LZMA2 streams require 5.0.2.
* xzdiff and xzgrep now support .lzo files if lzop is installed.
The .tzo suffix is also recognized as a shorthand for .tar.lzo.
-------------------------------------------------------------------
Thu Dec 25 20:17:06 UTC 2014 - andreas.stieger@gmx.de
- xz 5.0.8:
* Fixed an old bug in xzgrep that affected OpenBSD and probably
a few other operating systems too.
* Updated French and German translations.
* Minor build system update
-------------------------------------------------------------------
Fri Dec 19 09:43:36 UTC 2014 - meissner@suse.com
- build with PIE support.
-------------------------------------------------------------------
Thu Dec 18 19:37:09 UTC 2014 - crrodriguez@opensuse.org
- Build XZ with full RELRO.
-------------------------------------------------------------------
Tue Sep 23 00:11:27 UTC 2014 - andreas.stieger@gmx.de
- xz 5.0.7:
* Fix regressions introduced in 5.0.6:
- Fix building with non-GNU make.
- Fix invalid Libs.private value in liblzma.pc which broke
static linking against liblzma if the linker flags were
taken from pkg-config.
- include changes from 5.0.6:
* xzgrep now exits with status 0 if at least one file matched.
* A few minor portability and build system fixes
-------------------------------------------------------------------
Sun Nov 24 16:25:53 UTC 2013 - andreas.stieger@gmx.de
- add optional -static-devel library package, intended to publish pixz for
CentOS / RHEL, default off
-------------------------------------------------------------------
Wed Oct 16 08:53:16 UTC 2013 - mvyskocil@suse.com
- Use gzipped archive to prevent a build cycle on older targets
* http://lists.opensuse.org/opensuse-buildservice/2013-10/msg00079.html
- Add a signature and keyring file for source verification
* not enable in spec due bootstrapping issues
-------------------------------------------------------------------
Tue Jul 16 13:52:16 UTC 2013 - idonmez@suse.com
- Update to version 5.0.5
* lzmadec and liblzma's lzma_alone_decoder(): Support decompressing
.lzma files that have less common settings in the headers
(dictionary size other than 2^n or 2^n + 2^(n-1), or uncompressed
size greater than 256 GiB).
* xz:
- Fixes and improvements to error handling.
- Various fixes to the man page.
* xzless: Fixed to work with "less" versions 448 and later
* xzgrep: Made -h an alias for --no-filename.
-------------------------------------------------------------------
Tue Jan 29 17:28:51 UTC 2013 - guillaume@opensuse.org
- Disable profiling for aarch64 arch
-------------------------------------------------------------------
Tue Nov 27 11:10:13 UTC 2012 - sweet_f_a@gmx.de
- Update to version 5.0.4
* liblzma:
- Fix lzma_index_init(). It could crash if memory allocation
failed.
- Fix the possibility of an incorrect LZMA_BUF_ERROR when a BCJ
filter is used and the application only provides exactly as
much output space as is the uncompressed size of the file.
- Fix a bug in doc/examples_old/xz_pipe_decompress.c. It didn't
check if the last call to lzma_code() really returned
LZMA_STREAM_END, which made the program think that truncated
files are valid.
- New example programs in doc/examples (old programs are now in
doc/examples_old). These have more comments and more detailed
error handling.
* Fix "xz -lvv foo.xz". It could crash on some corrupted files.
* Fix output of "xz --robot -lv" and "xz --robot -lvv" which
incorrectly printed the filename also in the "foo (x/x)" format.
* Fix exit status of "xzdiff foo.xz bar.xz".
* Fix exit status of "xzgrep foo binary_file".
* Fix portability to EBCDIC systems.
* Fix a configure issue on AIX with the XL C compiler. See INSTALL
for details.
* Update French, German, Italian, and Polish translations
-------------------------------------------------------------------
Sun Jul 29 17:52:57 UTC 2012 - jengelh@inai.de
- Disable profiling on SPARC due to compiler bug [gcc #54121]
-------------------------------------------------------------------
Fri Jul 6 10:18:06 UTC 2012 - sweet_f_a@gmx.de
- correct license "LGPL-2.1+ and GPL-2.0+" (bnc#770195)
-------------------------------------------------------------------
Sun Feb 12 23:37:44 UTC 2012 - crrodriguez@opensuse.org
- Put libraries back in %{_libdir}, /usr merge project.
-------------------------------------------------------------------
Sun Oct 9 15:25:02 UTC 2011 - sweet_f_a@gmx.de
- rewrite last broken arm portability changes
-------------------------------------------------------------------
Fri Sep 30 20:31:59 UTC 2011 - crrodriguez@opensuse.org
- Fix build in armv5el doesnt like profiling
-------------------------------------------------------------------
Tue Sep 27 13:05:34 UTC 2011 - sweet_f_a@gmx.de
- minor fixes of last portability changes:
* decouple do_profiling and lang_package again
* don't define do_factory, just use lang_package instead
* simplify files section
* do_profiling for some more systems
-------------------------------------------------------------------
Mon Sep 26 15:59:51 UTC 2011 - coolo@suse.com
- build on SLE_10
-------------------------------------------------------------------
Sat Sep 17 15:19:50 UTC 2011 - coolo@suse.com
- remove _service, too fragile
-------------------------------------------------------------------
Fri Sep 16 16:37:32 UTC 2011 - jengelh@medozas.de
- Add xz-devel to baselibs
- Remove redundant sections
-------------------------------------------------------------------
Tue Jun 14 18:04:53 CEST 2011 - dmueller@suse.de
- add recommends xz-lang
-------------------------------------------------------------------
Wed Jun 8 19:25:51 UTC 2011 - coolo@novell.com
- Update to version 5.0.3
* liblzma fixes:
- A memory leak was fixed.
- lzma_stream_buffer_encode() no longer creates an empty .xz
Block if encoding an empty buffer. Such an empty Block with
LZMA2 data would trigger a bug in 5.0.1 and older (see the
first bullet point in 5.0.2 notes). When releasing 5.0.2,
I thought that no encoder creates this kind of files but
I was wrong.
- Validate function arguments better in a few functions. Most
importantly, specifying an unsupported integrity check to
lzma_stream_buffer_encode() no longer creates a corrupt .xz
file. Probably no application tries to do that, so this
shouldn't be a big problem in practice.
- Document that lzma_block_buffer_encode(),
lzma_easy_buffer_encode(), lzma_stream_encoder(), and
lzma_stream_buffer_encode() may return LZMA_UNSUPPORTED_CHECK.
- The return values of the _memusage() functions are now
documented better.
* Fix command name detection in xzgrep. xzegrep and xzfgrep now
correctly use egrep and fgrep instead of grep.
* French translation was added.
-------------------------------------------------------------------
Thu Apr 7 20:43:05 UTC 2011 - crrodriguez@opensuse.org
- Update to version 5.0.2
* LZMA2 decompressor now correctly accepts LZMA2 streams with no
uncompressed data. Previously it considered them corrupt. The
bug can affect applications that use raw LZMA2 streams. It is
very unlikely to affect .xz files because no compressor creates
.xz files with empty LZMA2 streams. (Empty .xz files are a
different thing than empty LZMA2 streams.)
* "xz --suffix=.foo filename.foo" now refuses to compress the
file due to it already having the suffix .foo. It was already
documented on the man page, but the code lacked the test.
* "xzgrep -l foo bar.xz" works now.
* Polish translation was added.
-------------------------------------------------------------------
Fri Mar 4 17:54:21 UTC 2011 - crrodriguez@opensuse.org
- Update to version 5.0.1
* Fix --force on setuid/setgid/sticky and multi-hardlink files.
* Add alloc_size and malloc attributes to a few functions.
* Fix gzip and bzip2 support in xzdiff
-------------------------------------------------------------------
Tue Dec 7 18:47:04 UTC 2010 - cristian.rodriguez@opensuse.org
- Use compiler profile information, makes xz marginally faster
(around 1-2 secs)
-------------------------------------------------------------------
Sat Oct 30 20:17:49 UTC 2010 - jengelh@medozas.de
- Use %_smp_mflags
-------------------------------------------------------------------
Thu Oct 28 09:18:47 UTC 2010 - coolo@novell.com
- adapt baselibs.conf
-------------------------------------------------------------------
Wed Oct 27 00:28:26 UTC 2010 - cristian.rodriguez@opensuse.org
- Update to 5.0.0 final
* The major soname has been bumped to 5.0.0. liblzma API and ABI
are now stable.
* The memory usage limit is now disabled by default
* Added support for XZ_DEFAULTS environment variable
* The compression settings associated with the preset levels
have been changed,they are now less likely to make compression worse.
* Support for "xz --list" was added
-------------------------------------------------------------------
Sat Apr 24 11:38:25 UTC 2010 - coolo@novell.com
- buildrequire pkg-config to fix provides
-------------------------------------------------------------------
Sat Dec 12 18:40:53 CET 2009 - jengelh@medozas.de
- add baselibs.conf as a source
-------------------------------------------------------------------
Fri Sep 4 11:53:41 CEST 2009 - coolo@novell.com
- update to 4.999.9beta
* only some polishment above the git snapshot I took
-------------------------------------------------------------------
Sun Aug 23 14:50:09 CEST 2009 - coolo@novell.com
- borrow %check section from fedora spec
-------------------------------------------------------------------
Thu Aug 20 15:51:47 CEST 2009 - coolo@novell.com
- update to latest git (5.0 still not released)
* a xz man page (bnc#505969)
* fix data corruption in LZ/LZMA2 encoder.
* major documentation update
* install lzdiff, lzgrep, and lzmore as symlinks
* make the default memory usage limit 40 % of RAM for both
compressing and decompressing.
* fixed a crash in liblzma
See git://ctrl.tukaani.org/xz.git for more
-------------------------------------------------------------------
Sun Jun 7 19:39:45 CEST 2009 - crrodriguez@suse.de
- remove static libraries, see bnc#509945 for details
-------------------------------------------------------------------
Sun Feb 22 18:37:26 CET 2009 - ro@suse.de
- added baselibs.conf (for rpm-32bit)
-------------------------------------------------------------------
Mon Feb 16 10:59:51 CET 2009 - coolo@suse.de
- use bzip payload, so users are able to install new rpm on old systems
-------------------------------------------------------------------
Wed Feb 11 12:44:41 CET 2009 - coolo@suse.de
- fix devel symlink
-------------------------------------------------------------------
Fri Feb 6 13:50:53 CET 2009 - schwab@suse.de
- Update to xz-4.999.8beta.
See git://ctrl.tukaani.org/lzma-utils.git.
-------------------------------------------------------------------
Wed Jan 7 10:26:30 CET 2009 - schwab@suse.de
- Update to xz-4.999.7beta.
See git://ctrl.tukaani.org/lzma-utils.git.
- Rename to xz.
-------------------------------------------------------------------
Wed Jul 30 13:53:18 CEST 2008 - schwab@suse.de
- Update to lzma-4.32.7.
* If "lzma -t" is run on a corrupt file or interrupted by a signal,
don't unlink /dev/null.
* Partial fix to race conditions where a signal could make lzma to
unlink both the source and destination files. Now it cannot lose
data anymore, but with bad luck an incomplete file may be left
on the disk.
-------------------------------------------------------------------
Wed May 14 22:04:25 CEST 2008 - schwab@suse.de
- Update to lzma-4.32.6.
* Always use 32-bit integer to hold probability variables. Earlier,
these were 64-bit on 64-bit architectures, which hurt cache
efficiency in the CPU, and thus performance of LZMA. 32-bit
architectures are not affected by this change.
* Fix a theoretical data corruption bug in the LZMA encoder. It is
about overflowing a 32-bit integer, whose typical value stays below
five. I don't know if it is actually possible to construct to a file
that could make it overflow. Even if it were possible, it would "only"
make the output file corrupt so that it is 4 GiB too small; there
are no other security risks. Now the integer is 64-bit to be sure
it won't overflow.
* Add support for copying timestamps on operating systems that support
setting timestamps only by filename, not by file descriptor.
* Several portability fixes were made.
-------------------------------------------------------------------
Fri May 9 11:51:42 CEST 2008 - schwab@suse.de
- Revert last changes.
-------------------------------------------------------------------
Tue May 6 22:36:09 CEST 2008 - bk@suse.de
- ci removed #neededforbuild while mbuild converts to BuildRequires
- bzip2 source to save space (not lzma, so it can be built in <11.0)
-------------------------------------------------------------------
Tue May 6 14:24:02 CEST 2008 - bk@suse.de
- run the package-provided self-test by adding a call to 'make check'
- use %configure instead of equivalent configure call with options
- improved to allow building in SLES and non-SUSE repositories, eg:
- replace obsolete nostatic patch with check for static objects
- use more generic wildcards in the file list for manual pages
-------------------------------------------------------------------
Mon Feb 4 19:20:31 CET 2008 - schwab@suse.de
- Fix installation.
-------------------------------------------------------------------
Mon Feb 4 13:32:06 CET 2008 - schwab@suse.de
- Update to lzma-4.32.5.
* The percentage shown when --verbose is used, works again. Also some
typos were fixed from the messages printed by --verbose.
* Several small portability fixes were made.
-------------------------------------------------------------------
Fri Jan 4 07:12:26 CET 2008 - crrodriguez@suse.de
- Version 4.32.4
* Ignore command line switch --format=alone. This way current scripts
can be written so that they will produce LZMA_Alone format files
even with the new command line tool once it is finishes along with
liblzma.
* The command line tool now tells if the user tries to decode files
in the new .lzma format. The message recommends upgrading to newer
LZMA Utils.
* Added some internal consistency checks to liblzmadec, so that it
doesn't crash if given lzmadec_stream whose initialization failed.
Some applications using zlib and libbzip2 don't check if
initialization was successful, and expect that error gets caught
safely later.
- disable static libraries
- remove liblzmadec.la that has empty dependency_libs
- do not link utils statically
-------------------------------------------------------------------
Mon Dec 3 14:12:12 CET 2007 - dmueller@suse.de
- update to 4.32.3:
* rare file content loss bugs fixed (did not check for error upon close())
* permissions copying fixed
- testsuited switched partially to GPLv3
- fix library package name
-------------------------------------------------------------------
Thu Oct 11 14:52:41 CEST 2007 - schwab@suse.de
- Fix missing include.
-------------------------------------------------------------------
Wed Oct 10 14:56:31 CEST 2007 - schwab@suse.de
- Initial version 4.32.0beta5.
View Git Blame Copy Permalink